Facade and facing materials are an integral part of any construction project, thanks to their indispensable functions. They differ in characteristics depending on their functional destination and manufacturing material. In our stores you can buy facade materials for outdoor decoration facades of houses. Fast delivery in Moscow and the Moscow region. In stock All types of facing materials at low prices.
It is the facade materials for finishing at home can give the design a special color, to make a bulky building built by typical project, elegant, add a note of exclusivity to the music of foam concrete, brick or gas-silicate blocks, from which the walls are erected.
Because of the wide variety of finishing materials, many today face a difficult choice. You should not forget that the facade finish carries not only aesthetic function, but should also withstand external destructive factors, such as water, wind, UV radiation, snow and low temperatures, mechanical damage.
To begin, it is necessary to highlight several particularly important criteria to which you need to pay attention to the determination of the material for facing the building:
Consider the most common types of facades. Today it is:
1) Siding. It is made of various raw materials, more often it is PVC or metal. It is narrow long lamellas that are installed on the crate. From indisputable advantages - low cost and simplicity of installation. This type of facade has a low weight and is not subject to rotting.
2) Fibro-cement panels. Mixed from a mixture of cement, natural mineral fillers, fiberglass and cellulose fibers. Durable and eco-friendly facade material.
3) Facade thermopanels. Consist of high quality clinker tiles based on polystyrene foam. Create an additional layer of insulation. When mounting, the tiles look very aesthetically, and the seams between them will be perfectly smooth.
4) Facade / base panels. Consist of high quality polypropylene. Have increased strength, compared to PVC. Stall bear shocks and mechanical damage. A wide range of textures and colors from bricks to rocky sandstone. Mounted as easily as siding.
Each of these facing materials finds its consumer, they can also be combined, creating a special expressiveness of the building.
Each of these facing materials finds its consumer. Different types of facade materials make buildings more attractive, aesthetically expressive and interesting. We offer products of leading European and Russian manufacturers.
Final stage of construction country house - Finishing, applies to it, along with other, work on facing facade. The assortment of finishing materials is huge and for right choice need to consider their characteristics and features Applications.
Most modern building materials have excellent insulating properties and high strength, but them appearance Unassicate. Therefore, a facade cladding is laid in the project of the newly under construction of a country house.
Modern materials allow you to build a house in any style, regardless of the material of the walls. In addition, homeowners are often resorted to the trim of the facade during the restoration and repair of old houses - this allows them to give them a new appearance..
Facing facade carries not only a cosmetic effect, in addition, she protects material of walls from harmful factors: Sun, wind, moisture, improves heat insulating characteristics building. In general, correctly completed wall decoration will prolong the service life.
The choice of modern facing materials is distinguished by a variety, when they are selected, the following factors usually take into account:
All materials used for facing facades have their advantages and disadvantages, and the task of the developer - find the best option for your home.
This popular finish view Most often used for finishing walls of bricks and building blocks.
Benefits of plaster:
Applying decorative plaster.
The disadvantages can be attributed fast destruction of the plastering layer In case of improper application and operation of the building.
Types of plaster:
Designers often use stucco in combination with other finishing materials: stone, decorative brick and tiles. This reception allows you to refresh the facade, Create accents, for example, on window openings, columns or corners.
Stone can be used not only for decorating, but also as an independent finish. Such a type of finish, not cheap, but durable and allows you to give home a rich appearance.
Natural stone is a heavy material, so they finish the walls of bricks or blocks that can withstand the weight of the facing. The stone has the wrong form and requires fitting, as well as stamps of seams.
An alternative to natural - artificial stone. It is easier I. much more affordable, imitates different types Stone, easier mounted on the surface of the walls. Like a natural stone, he does not burn and does not destroy moisture.
This type of finish is ceramic tiles, imitating clinker brick (see photo). Finishing brick itself is good way Facing walls, but it is usually attached at the stage of masonry walls. Clinker tiles can be used for repair and restoration of old buildingsWhat makes it more universal.
Clinker thermopanels combine two functions: insulation and decoration. Due to their size, the time of finishing work is significantly reduced, and the appearance of such a house is no different from the building decorated with bricks.
Clinker tile has a natural color gamut from sandy to dark brown, she has durability and moisture resistance, not lit, does not contribute to the development of mold. This finish is durable, with proper montage will last at least 50 years.
Porcelain tile - artificial material, not subject to shrinkage, moistureproof and durable.
It can be attached to a special glue, like the finishing stone, but the moistureness of the porcelain stoneware will contribute to moisture delay inside the walls. Therefore, the porcelain tile is more often used in ventilated facades.
This method of finishing implies the fastening to the wall of the crate of the metal profile, to which the porcelain tile is mounted using special mounts. Between tiles and wall leave a ventilated clearance Or lay a layer of fibrous insulation, allowing you to remove moisture from the walls.
The richness of the color gamut and the size of the porcelain tile makes it a popular finishing material for country houses. Service life - at least 25 years.
Repair of the ventilated facade of porcelain stoneware is very simple: damaged tiles are removed and replaced with a new one.
Siding - polymer or metal finishing panels used in ventilated facades.
With their help you can finish new homes or restore old Buildings from any material. Vinyl siding has more natural and muted colors, metallic - brighter. There are varieties of finishing panels, imitating wood or stone. Fasten on the crate from the bar or metal profile.
The advantages of siding:
Disadvantages:
Wood - the most eco-friendly material. Thanks to the ability to "breathe", wood finish is possible both for wooden buildings and for brick and block houses. Like siding, fastening wooden decoration Perform according to the method of the ventilated facade.
The frame is performed from bars, between which you can put the insulation slabs. All wooden elements it is necessary to process antisepticAnd the finishing material itself is recommended to be painted or covered with protective equipment for wood.
Finishing wood can have a different form: Block House - imitation of a rounded log, imitation of a bar, a puzzle front board.
Advantages of wooden finish:
Substantial disadvantages include:
Having considered the description of the facing materials, you can draw conclusions and decide on the choice. For facing facade wooden house It is better to use a ventilated facade from siding or finishing wood. This finish will allow the house to "breathe", she not afraid of shrinkage and seasonal deformations, perfectly harmonizes with a wooden house style.
To finish the house of bricks and blocks, plaster, finishing stone or tile, as well as ventilated facades with any finishing are perfectly suitable.
When using moistureproof materials be sure to arrange efficient exhaust ventilation In the house, otherwise not to avoid high humidity, condensate and mold. Over time, this can lead to the destruction of the walls.
Each type of finishing of outer walls has its own technology, the main stages of which are shown below.
Rules for applying plaster:
Installation rules of the ventilated facade:
Facing rules by stone, clinker or tiled:
Facing facade clinker tiles.
Facing the facade of a country house - the key to his beauty and durability. After selecting the material younger, the homeowner will be able to realize my ideas and make the house with a real cozy family nest, give him charm and uniqueness for many years.
The final stage of the capital construction of a private house or cottage is the trim of the facade. And here, as a rule, the question arises, which is relevant to all owners. Owners of private buildings want to know than to separate the facade of the house inexpensively. Facing the walls should be not only high quality, but also attractive from aesthetic point of view. But at the same time, few of the owners want to invest in the material that will allow the appearance of his home to become exclusive. After all, few have the opportunity to afford the decision on the finishing of external walls without taking into account their value.
However, in search of a response to the question of how inexpensive to separate the facade of the house should not be made to extremes. Stopping on a budget version, an objective assessment of the characteristics of the selected material should be given, in particular, its ability to resist the wind, frost, the sun, rain and other environmental impacts. After all, it is unlikely that there is a need to know the saying about the fact that the miser pays twice.
The trim of the facade is very cheap, of course, is impossible. However, the selection of the building material, which, with other similar operational characteristics, will have a smaller cost, quite real.
What are the materials for high-quality and inexpensive finishing of the external walls of the building? With their choice, the owner of the private house first of all should pay attention to the following:
The number of textures and color solutions offered by the manufacturer;
- resistance to the emergence of visual defects and to fading;
- similarity with natural material, especially if an option with a simulation product is considered.
The following criterion is durability. The facade from an inexpensive material may be a real headache for the owners. After all, he will require annual repair work. What is better to separate the facade of the house inexpensive? Liked materials that possess a good time Services. This should be the main criterion of choice.
Competently approaching the problem of the task when solving the question "How to separate the facade of the house inexpensive?", It will take to consider the final value of the entire external cladding. It should include:
Financial costs for the purchase of one square meter or a kilogram of material;
- the cost of components, necessary equipment and tinting;
- Mounting costs, as well as conducting preparatory work.
In cases where the selected variants of materials have equal characteristics, it is worth paying attention to the final value of their application.
Question about how to separate the facade of the house inexpensive, should still be in the design stage. After all, only in this case, it will be possible to correctly distribute the budget, as well as to develop the organization of sound insulation and heat saving in advance.
By type of facades are divided into:
- "wet", created when using building mixtures;
- Dry, equipped with mounting material with fasteners (self-draws, dowels, nails, etc.).
On the presence of a gap between cladding and outer wall Houses of the facades are divided into ventilated and non-ventilated. Installation is performed different ways. In the first case, a free space remains between the house and material of the facing, which serves for air ventilation and moisture. With non-ventilated facades, the finish is attached directly to the wall.
How to separate the facade of the house inexpensively by material, having received a durable and high-quality finish? One of the most common options is the decorative plaster. This is the easiest and most popular way, the use of which can protect and decorate a private house. To date, in the building materials market, manufacturers are presented with a huge number of plaster compositions, which differ in the type of surface obtained and in their basic properties. Those owners who ask the question "How to separate the facade of the house inexpensively and beautiful?" Can use plaster that has the following advantages:
Aesthetics in connection with the existing rich assortment and a wide choice of color solutions;
- water resistance, not absorbing and not missing moisture;
- the ability to resist the temperature changes and the influence of the Sun;
- wonderful sound and thermal insulation indicators;
- good strength, as well as the ability to withstand small mechanical impacts;
- ease of installation and lack of need for expensive equipment;
- low price.
Among the disadvantages of plaster allocate:
The possibility of cracking;
- peeing the coating layers;
- Manifestation on the surface of spots.
However, it is worth it in mind that all disadvantages of plaster are associated with its improper installation. If there was no error during its carrying out, then the risk of such problems is practically no.
Plaster There are various types of mixtures of mixtures. It should take into account the owners who are asked about how inexpensively separate the facade of the house. So, distinguish plaster:
Mineral;
- acrylic;
- silicate;
- Silicon.
Consider the most budget options.
This material is especially good for those who consider various options To solve the issue: "How to separate the facade of a private house inexpensive?" This photo of such a finish is shown below.
Mineral plaster is budget and therefore the most common composition. In addition to low cost, the material attracts attention to a wide range of color schemes, excellent resistance to the effects of direct rays of the Sun, as well as to the development of microorganisms in it.
Mineral plaster is a fireproof. In this regard, it is often used when a flammable insulation was applied during the house facing the house. In addition, mineral plaster is remarkably combined with any building materials. The main disadvantage is its low level of elasticity. This sometimes is a significant problem in the shrinkage of the building, when many small cracks appear on its walls. Similar nuance It is worth considering the owners just built houses. On average, the material can serve from 12 to 16 years.
What is inexpensive to separate the facade of the house? To solve such a task, acrylic plaster is quite suitable. It is somewhat more expensive than mineral, but devoid of its main drawback. Acrylic plaster is more elastic, which does not spoil the facade during the shrinkage of the building. Moreover, this species Mixes are more durable. On average, its service life is 18 years old.
Among the disadvantages of the material, it is possible to combine it, which should be taken into account when choosing a heater. In addition, a similar surface collects dust well, which will require further careful care for the outside walls of the building.
What else can you get outer walls At the same time to achieve their maximum durability and quality? To do this, the silicate plaster is perfect, which is made with the addition of potash glass. This component is the material and owes its wonderful operational properties. Such stucco is the most durable, without losing its properties for almost 30 years. The material is quite elastic, which allows him not to give cracks during the shrinkage of the walls. He does not even attract dust to him, and the dirt fell on it is washed off from the surface during the rain.
Of course, such plaster, compared to those described above, has a higher cost. That is why its choice directly depends on the possibilities of the budget of the hosts of the house.
How to separate the facade of the house inexpensively with your own hands? The most popular materials include facing brick. For these purposes, a special decorative material is used. Such a brick is called facial, facing or facade. It has excellent appearance, rich in various shades, forms and textures.
In addition, such material has excellent stability indicators for the ability to resist harmful influence Environmental factors.
How to separate the facade of the house from aerated concrete? For this, ceramic brick is suitable. It is made from clay that is subject to burning. Such material familiar to everyone has the following advantages:
Durability;
- environmental friendliness;
- good heat and sound insulation indicators;
- resistance to temperature differences, and, in addition, to the fire and the bright rays of the sun;
- cheap.
Among the disadvantages allocate:
Not always accurate geometry;
- presence in the composition of limestone enclosures that are distinguished by darker color;
- the possibility of destruction or swallowing with poorly performed solution;
- high degree of water absorption that reduces the frost resistance of the material.
This finishing material is made by the autoclavation method of the cement-sand mixture, which introduces special additives. It is at the expense of simplicity of its manufacturer and low cost of used raw materials, a silicate brick is considered the most affordable of all such types of facing.
Among its advantages are distinguished:
High strength;
- accurate geometry;
- environmental friendliness;
- good sound insulation properties;
- Low price.
This material should draw attention to someone who does not know than to separate the facade of the wooden house inexpensively.
From the disadvantages allocate:
Not the best decorative bricks;
- considerable weight;
- low thermal insulation qualities;
- high degree of water absorption;
- Low frost resistance.
This finishing material is based on quartz sand, cement, filler, as well as various additives. Its advantages are:
Moisture resistance and durability;
- stiffness and strength;
- wide selection;
- Low cost.
Among the disadvantages allocate:
Weak resistance to temperature differences;
- high weight when used for "wet" facade;
- Frequently dropped products with inaccurate geometry.
Than to separate the facade frame house inexpensive? In solving this issue, it is worth considering one of the easiest in the appeal of modern decorative materials - siding. It is offered by the manufacturers in a wide range and on its operational characteristics is very durable (up to 50 years). In addition, siding has remarkable heat and sound insulation properties.
Siding can be decorated not only frame house, but also wooden, brick, as well as any surface. Built this material And a long time has long been erected. This material is vinyl and wooden, metallic and cement. Consider the most budget variant of this facing.
This cladding is made from polyvinyl chloride. In its appearance, it can imitate brick and stone, as well as wood and other natural materials.
Vinyl siding is the most popular material used for the facades of cottages, due to the following:
Long service life;
- resistance to temperature differences, corrosion, sun rays and fire;
- low weight;
- relatively low cost;
- wide range;
- ease of installation and further operation.
Often, its resistance to various mechanical damages also includes the advantages of vinyl siding. However, with strong impact, the integrity of the material is broken.
The disadvantage of vinyl siding is the high level of linear expansion coefficient. Such a feature must be taken into account when installing. In addition, vinyl siding has low thermal insulation qualities, as well as the complexity of the repair, if necessary, replace one of the elements.
The dangers of this material are even relatively recently spoken quite a lot. On this wave, the slate has already become somewhat forbidden in private construction. However, this issue should be understood to the end. Yes, in former times for the production of slate was used unsafe for health asbestos. To date, the material of this component does not contain.
In this regard, someone who does not know how inexpensively finish the facade of the house, it is worth purchasing flat sheets slate. They are perfect for finishing frame houses, as well as buildings made of gas silicate or aerated concrete.
Quite an interesting option The facade is to use with its facing various combinations of flat and wave slate sheets.
Often the finished house requires finishing. Either the outdated walls of the building must be updated, warming them and putting them with other building materials. At the same time, 90% of developers in all cases wish to save the budget and choose inexpensive facade material. That is why we will analyze in the article, the cheaper to see the house outside and at the same time get a beautiful decorative effect.
IMPORTANT: When choosing a facade material for cladding at home, it is worth considering the difference in linear expansion wall material and material selected for cladding. If this aspect does not take into account, then under the influence of temperature differences of the wall of the house and the casing will be expanded each in its own way. As a result, cracks can be formed outside or inside the cottage.
Before cheap to separate the walls of the cottage, it is worth take into account some moments:
IMPORTANT: Choosing, than to see the house outside cheap and beautiful, give preference to non-combustible materials.
The most fiscal option in order to outdoor View At home acquired an attraction. In addition to the fact that the facade plaster plays the role decorative finishSince it is most often a textured, such a building mixture has a number of other benefits, such as:
For external work, the world of building materials offers such types of plaster:
Important: For walls from aerated concrete, the plaster specially intended for such blocks should be purchased. It allows you to align visible irregularities and defects and protect the walls from the effects of moisture and temperature differences.
Another of the budget options designed to separate the walls of the old house. Let's say we have old brick housewho lost its gloss. But at the same time the walls are still quite strong. In this case, you can use paint as a facade "update". Such a material is a building mixture, which includes a structuring filler. The thickness of such paint is 10 mm, which allows you to form a protective and simultaneous decorative barrier on the walls of the cottage.
The peculiarity of such facade paint is that it can be applied even to an unprepared surface without prior closeup of cracks and chips. Due to its structure, the facade paint will be blocked all irregularities. In addition, the coloring mixture is able to "breathe", which has a beneficial effect on both stone / block walls and wooden.
Such a trimming material occupies one of the leading positions in the construction market. And competitiveness is due not only to an acceptable price of the material, but also technical characteristics. Siding is thin long panels 150x500 mm, having a perforated edge in its design for simplified installation of material to a frame. The second edge of the panels has a light ledge that allows you to cover the fastening sites of the underlying elements. Thus, the sheath takes the integrity and attractiveness.
Siding is popular also because it has a wide color gamut. Or rather completed in different versions - Under the tree, marble, stone, brick, etc. Thus, you can give the house any kind according to the intended design.
There are several types of siding according to the type of material from which it is manufactured:
Important: Siding can be mounted on top of the system ventilated facade. The material does not interfere with air microcirculation.
To cover the house in the style of Country, you can use a edged or unedged board. The first option is a lumber with perfectly smooth faces. The second type of blackboard is a lamella, separated from an unprepared and non-unleashed log. As a result, the bark remains on the ends of the boards, Lob and Sokhlia. Such trimming material is used to clamp the walls with a Christmas tree or a mustache. The panels are placed one to one in the bottom upward. The covering with proper care will serve 15-20 years. Then the boards will need to change. Although for a small country house, this option is perfect. After all, the tree keeps warm, ensures the walls of breathing, and it looks just beautiful.
If you want to use a tree as a cladding, but in such a way that the house can be rich, you can use a block house. These are the same wooden panels, but having a convex side. That is, imitates the log. The cover of the house by a block house looks colorfully and expensive at low value of the material.
Tip: If there is a desire to save even more, you can buy siding under a block house.
Often, clinker tiles are used for cladding at home. It can imitate bricks, stone, etc., make such a material from a mixture of water, clay and glaze. As a result, it turns out an environmentally friendly material of low weight. Therefore, the facing of the house tile does not require the strengthening of the foundation. The tile interacts perfectly with the sun, water, low and high temperatures. And to the fire such material is completely inert. Tile laying can be performed independently, observing all the principles of laying. Thus, the budget finishes will be released.
Remember, the house, separated by correctly selected materials, not only gets a new appearance, but also gets a longer service life.
After completing large-scale stages of construction, it is necessary to think about what materials will be used to finish the external surfaces of the building. The construction market is replete with a variety of proposals offering a huge selection of decorative design. Therefore, finishing facades of houses modern materials Photos of which are collected in the selection, can be performed in perfect different style and direction.
More recently, the main conditions were reliability, the durability of the facade of the house. Today there is a significant increase in the requirements for materials, the main task which are considered to finish the facades of the house of the photo of which are presented in the selection.
Basic operating conditions:
Modern materials for finishing the facade of private houses have the opportunity to counteract any negative factors and at the same time perform a decorative function. How to separate the facade of the house? Consider the most popular options for finishing the facade of a private house.
Used as a decorative finish of the facade of the house. Qualified specialists using finishing material create unique embossed planes that imitate natural raw materials.
The trim of the facade of the house by plaster passes using cement-sandy solution, there are special additives in it, providing surfaces excellent protection. To finish the facade, it is necessary to arrange heat and waterproofing, for which the insulation will be required.
Recent popularity has recently received the facade of the facade. The newest finishing technology allows you to achieve excellent results in the shortest period of time. For this, manufacturers offer to choose a ready-made solution in buckets, a dry mixture in bags. Finishing the facade of a private house with a core is carried out in conjunction with the insulation of the outer walls. Recently, the trim of the facades of the private house of koroedov is becoming increasingly popular.
For decorative processing of an updated surface, various types of paints based on acrylic are used - it helps to ensure maximum protection of the building facade, creates a durable external coating. Finishing facades of private houses, photo selection contains the most popular types of plaster.
The new element of the finish is created from the refractory species of earthen clay. In the production process, clay is subject to heat treatment at the most high temperatures. Due to this, the facade facing brick becomes durable and durable.
Decorative brick has a number of positive qualities: heat resistance, environmental friendliness, variety of forms and ease of care. The surface can be matte, glossy, rough or have design under ancient.
A variety of color gamma allows the use of clinker brick for the decorative finish of the facades, the basements of country houses, combine the framing around the interroom or entrance doors, arched openings. Photo clearly demonstrates a brick house finish.
Clinker tiles - small clay plates. Building materials have a similar shape, dimension and colors, similarity allows you to design at home by clinker tiles. The clinker tiles of the photo of which are presented below. You can make a facade of any home.
Unique decorative elements will help create a wonderful pattern in the corners of the walls. Facades look most attractive one-storey housesLined with clinker tiles, photo selection is presented below.
Durable building material is made of artificial materials by pressing a shracker powder with a subsequent firing with increasing temperatures. The facade finish with a porcelain stoneware has gained particular popularity due to the presence of a certain number of positive properties in the finishing material.
Porcelain stoneware has a large margin of strength and reacts weakly to external mechanical effects.
A good look of the material is ideal for outdoor wall decoration. The base may have bright colors, rainbow divorces or imitate natural stone, various species of trees.
The finishing of facades of buildings with porcelain stoneware is carried out in two ways:
What a way to choose, everyone solves independently.
These materials belong to the facing group, thanks to which you can easily transform apartment house, office building or small shopping pavilion. Different materials are suitable for finishing facades of private houses.
Composite cassettes are completed structures with curved edges. When mounting the walls, a solid coating is obtained. Durable and reliable material successfully confronts various mechanical impacts and negative natural conditions. The mounting cassette with the facade can occur in various ways. First of all, it depends on what profile will be used. There are two options for connecting items: hidden and open.
With the hidden form of fasteners, the upper element profile is securely fixed for the bottom profile. This type of assembly allows you to create a sufficiently strong cladding over a short period of time.
During the open attachment, each finishing tile for the facade is fixed behind the corners on the carrier frame. This method provides perfectly smooth solid coverage. Finishing facades of houses with modern materials, photo gallery of the best design solutions Presented below.
The type of set panels is made of vinylindolimerous materials. The advantages of the material are:
Before separating the base or walls at home Siding photo of what is presented below, you do not need to be held long preparatory work. The trim of the facade of siding allows you to successfully hide all the irregularities and surface roughness.
Qualitative material during operation is not exposed to deformation, bloating or peeling. On its surface is not formed mold, insects do not come true. Thanks to these positive qualities of the material, the finishing of the facade of a wooden house Siding is considered the most favorable decision. The most original versions of housekeeping siding, photos are presented below.
The stone is rightfully considered the most reliable type of finishing of external surfaces. Natural and artificial stone is equally used for cladding. Decorative tile For the finishing of the facade of the natural material, it creates a solid protective coating, which is comparable by the period of operation with a period of use of the building itself. The artificial stone facade differs from its natural analogue only with a relatively low price and a rich selection of textures and colors. Before choosing a stone as the main finishing material, it should be noted that it has a lot of weight, so it cannot be used for finishing a house with a weak foundation.
In case of non-compliance with the laying technology, some stones during operation can fall off, so you will have to regularly restore the original surface type. The trim of the facade stone is a complex and laborious process, so it should be strictly observed all the installation technology and not violate the steps of the facade finish. Original finish of the facade of the house, a photo of unique residential buildings.
The assortment of panels simply amazes with its diversity. Some types of decorators are used to issue home interior. Each type facade panels It has its design, dimensions and method of installation.
What is better to separate the facade of the house? To answer this question, you should show the options of the most popular panels:
Metal 
Wooden 
OSB plate 
Sip Panel 
Fiber cement The panel sip is characterized by the highest degree of thermal insulation, excellent insulation. The small weight of the design allows the use of a panel sip for various bases, in some cases, a fairly small bolted belt. Thanks to the use of sip panels, the classic "Canadian" house can be built in a few weeks. The sip of the panel is weakly reacting to the effects of an external aggressive environment.
The design of the "wet facade" consists of a certain amount of layers. The layers are called adhesive, thermal insulating, reinforced and protective-decorative, each layer has its purpose.
The facades of this type have a wide range of applications due to the fact that all components are perfectly combined with each other and are able to show excellent results, high frost resistance, waterproof, vapor permeability.
Finishing house by type " wet facade»Requires certain skills, so it is not necessary to conduct a time-consuming work independently, it is better to refer to the specialists, only in this case you can achieve excellent results and for a long time to extend the life of the material.
System "Wet" facade Recently, the trim of the facade tree is gaining increasing popularity. The outer surface of the building, decorated with a board or timber, has a lot of positive qualities and advantages:
The house, finished by natural boards or a bar, will last much longer, if you choose the way to choose the variety of wood. Specialists advise to give preference only to those trees that grow in your area. This is necessary because they are better adapted to weather conditions and are much cheaper than overseas samples.
Reduce Impact on Natural Material weather conditions and an aggressive external environment by appropriate processing of surfaces and preliminary preparation of material.
What is better to choose and how will the construction of a residential building be held? The choice always remains for the owner. Here it is necessary to take into account the many nuances, starting with the economic side of the issue and ending with the technical capabilities of the building. Only when taking into account all these conditions, you can be sure that the finishing of the facade of private houses photos of which are presented below, will be high quality and durable.
The video presents the most popular ways to finish the facade parts of the building using modern materials.
In a selection of photos, the most successful projects for the finishing of facades of buildings are collected.
