Installation of Protherm Electrocotors Skat, Installation Proterm Skat

Installation of electric boilers Protherm Skat

Installation of electrocotes with spearm SKAT in Moscow

Wall-mounted 1-contour electric boiler protema scath is designed for the needs of heat supply in private houses, apartments and offices. Warm production installations differ:

• - Electrocotels of the CO stylish design;
• - the lack of the need to connect to the gas duct and gas pipeline;
• - the possibility of connecting the 3 phase power grid;
• - ease of service and operation;
• - High efficiency throughout the entire operational period;
• - environmental friendliness;
• - silent;
• - the ability to quickly regulate.

A feature of devices for obtaining thermal energy with a flutter is a high functionality that ensures that the heat installation is turned off when the electricity supply is stopped and the resumption of operation when power is supplied while saving all the presets. Settings parameters are displayed on an ergonomic display, which is equipped with a heating boiler.

The heat exchangers of the Protherm Skat have great capabilities, the starting setting of which occurs during commissioning work, and can later be changed by the user if necessary:

• - adjustment of the coolant temperature is carried out on the heat installation panel;
• - adjustment of the operation of heat generation installations is carried out under an individual heating system;
• - it is possible to install remote control of power supply from the tariff counter;
• - It is possible to install a room thermostat sensor and an outer t sensor to control the automatic electric boiler.

Shares

1. When buying equipment and editing, you get discount -10% On work! 2. When buying equipment, ordering installation, start and conclusion of the service contract on whether you get an additional emergency challenge is free (24 hours)!

List of boiler installation and estimated prices

* The price of installing a wall boiler is given on the conditions of its simple installation to existing pipelines, chimney, without the need to replace, or install the chimney, reinforcement and other necessary for the functioning of the equipment boiler.

** Prices are given as a guideline, the exact cost of mounting the boiler house is formed after surveying the object, taking into account the individual wishes of the customer.

Our services

For long and efficient operation electrical device To obtain thermal energy, the flows of the skate is necessary so that the installation and installation was carried out by adjuster specialists having special education, professional knowledge and practical experience.

Ajax Termo offers a complete list of services for the selection of electrocotes for individual heating, installation and commissioning of heat exchange devices Protherm Skat.

• - Company specialists will connect the heating boiler to the AC network.
• - Change electric boiler coolant.
• - Customize the equipment under the individual system of the customer's heating.
• - If necessary, installed and connect an additional boiler to heal water.
• - Certify the ability to control the operation of the electric boiler from the sensor of the outer T or room thermostat.
• - plug the voltage stabilizer to provide safe work electrical equipment.
• - Adjust the function of protecting the heating boiler from lowering the pressure in the system, from freezing or overheating a boiler.

Our company has considerable experience in the installation market and installation of automatic heating systems and electrocotes of various complexity. The attractive cost of services, a high level of service, warranty and post-warranty service are additional advantages of cooperation with Ajax Termo.

1. 1. installation Baxi.
   2. installation of Baxi Main.

Electric heating equipment of the company "Proterm" refers to one of the most popular devices designed to maintain a comfortable temperature mode premises. Thanks high level Quality and long-term operation of heating electric boilers Proterm occupy a leading position. Overview heating equipment Read the proterm gras.

Characteristics of electric boiler rubers

Electric boilers with rubber have a small weight - 34 kg, are divided into two-circuit and single-circuit heating devices. In addition, the electrical equipment of this species is pretty compact size, thanks to which it can be installed in almost any comfortable place in the house. All boilers have the following characteristics:

• The high indicator of the efficiency is 99.5%;
• Power indicator from 6 to 28 to W;
• Maximum pressure level heating system 3 bar.;
• Maximum current readings: 3 * 43 A;
• Maximum heating level of fluid - 850 C. Read more
  and the description of their characteristics.

Electric boilers heating protema scat

Special demand in the population enjoy heating boilers Proterm Skat. These boilers are provided in six power modifications:

• electric pot boiler 6 kW - one-connecting boiler with two 3 kW heating elements;
• electric boiler Proterm Skat 9 kW - a boiler with two heating elements in a heat exchanger with a capacity of 6 kW and 3 kW;
• electric pot boiler Skat 12 kW - wall-mounted electric heating boiler with two heating elements of 6 kW;
• copper Proterm Electric Skat 14 kW - a boiler with two heaters of 7 kW;
• the electric boiler is a flutter of 18 kW - has a high thermal power, due to the three heating elements of 6 kW;
• electric boiler Proterm Skat 28kvt is the most powerful boiler in this model line. There are four heating elements in a heat exchanger with a capacity of 7 kW each.

All the presented models belong to the heating electric double-circuit boilers And they work from voltage 220/380 V. The models of this species are intended not only for the heating of the room from 40 sq.m., but also for heating fluid.

Installing and connecting electric boilers

In order for the firm's electric boiler to function correctly, it should be connected correctly. Tips for connecting heating electric boilers:

__

Instructions for the operation of electric boilers

Use heating boiler ruber electric type For heating rooms various destination Not so complicated, because the control system and control of the electric boiler is pretty simple. In order to enter the heating device in the operating status, you must perform a number of unpaired actions:

• Turn on the heating boiler to the network;
• Select on the control panel heating device the level of the required temperature;
• Make the power settings of the heating device;
• Make accurate temperature regime settings;
• If necessary, then change the level of instrument pressure

In this article, we will not consider the process of connecting the electrocotel to radiators, cold water, filters and other elements of the heating system. The readers will be provided by a part associated directly with the electrical work: connecting an electric heating boiler to the power grid, grounding and installation of protective devices. Therefore, we will not take time from you and proceed to business.

Advantage and Scope of Electrocotes

Most often, electrocostiles are used at the cottage and in a private house. This is due to the fact that this equipment has a low cost and at the same time install it can be independently, without a wizard call.

Among the main advantages of electrical boilers are distinguished:

• the equipment is safe (the design does not include an open flame or the presence of flammable fuel sources);
• water heaters can be in the disconnected state to six months, with no harm for their performance (relevant for cottages and country houseswho are rarely visited);
• the dimensions are relatively small, so it is possible to place it in any room;
• to date, there is a huge variety of electrocalls, different in power, the installation method and the principle of action;
• when water heating, soot does not occur, dangerous both for humans and for the environment.

Safety regulations

Before we move on to the main part of the installation of heating, I would like to pay attention to the safety of electrical installation.

FirstlyThe connection of the heating electric boiler should be carried out when the electricity is turned off.

Secondly, it is necessary to install it at a certain distance from other objects, namely:

• there should be at least 5 cm of free space between the housing and the walls;
• the front panel must be available for service, 70 cm free space is enough;
• the distance to the ceiling is not less than 80 cm;
• the distance to the floor is not less than 50 cm (if the electric flocity of the suspension type);
• the distance to the nearest pipes is at least 50 cm.

ThirdlyThe network must be three-phase (380 V) to reduce the current loads on the wiring. When using a single-phase network to connect a powerful boiler, the wiring may not withstand, as a result of which its self-burning will occur and.

FourthAll should be hermetic and water protected. The injection of water to contacts can occur during damage to the pipeline (for example, the connecting coupling supplied to the unit) and when condensate condensate (in unheated room). It is also recommended to protect the cable to the corrugation or cable channel from a self-turning material. When changing wires, these products will prevent flame spread.

Electrical circuits

So, to your attention a few typical schemes Connecting an electric boiler in the house do it yourself:

As you can see, projects are pretty simple and consist of a water heater itself, the transport highway (pipes), circulating pump and radiators. Your task is to properly connect all the elements among yourself, after which it is turned on the power on.

Main process

Install the aggregate

First you need to install an electric boiler indoors. As we said, the unit can be outdoor and wall. In the first case, a special stand is included in the kit, on which the landing is produced.

In order to hang the boiler on the wall, it is necessary to prepare anchor with a dowel and a drill with a suitable drill. First, we place the wall with the help of roulette and marker. The holes must be placed perfectly in the horizontal plane. Next, drill the places marked, score a dowel in them and screw the anchor. After the anchor is tightly covered inside the wall, you can suspend the electrocotel.

We draw your attention to the fact that the installation of an electric boiler must be performed perfectly even in horizontal and in vertical plane. Any skew can affect the performance and service life of the equipment.

Sweep electrical wiring

Since the electric water heater has a greater power, it is necessary to connect it not from the outlet, but directly from the power grid. For this out distribution box In the room, you must display a separate line that goes to the boiler location. It is better to use a cable laying with a drop-down way, because In this case, the line will be protected from mechanical damage and at the same time appearance The premises will not deteriorate.

It should be noted that to power the boiler you need to use a large cross section cable that can withstand sufficiently high current loads. On how to implement the right, we talked in the relevant article with which we strongly recommend you to familiarize yourself.

So we draw your attention to the fact that the power of water heaters (up to 7 kW) can be connected to a single-phase network, which is often found in the Khrushchev and old-sample apartments. Well, the last nuance at this stage, which you should know - electric boilers up to 3.5 kW can work from the outlet, and not from a separate line from the distribution circuit. The low-power boilers are ideal for connecting in the apartment, because in this case the wiring is usually single-phase and to make a new cable layout is not always a suitable solution.

Install the protective equipment

When all the introductory wires are connected to the electrocotel, it will be necessary to further protect it and installed in the main shield. Purpose of the first device - protection of equipment from short circuit and overloading of wiring. Connecting an electrocotel through the UDO will protect you from.

It is also recommended, because Even small jumps can derive an aggregate.The fact that the electric boiler must be ground, I think it's not worth talking. The main requirement is that the grounding wire is carried out directly from the tire to the equipment body.

We produce start

When all posting elements are connected, it is necessary to check all connections. The bare contacts should not be, actually, as well as damaged isolation.

It is also necessary to check all the couplings, cranes and joints of pipes. Only after a high-quality inspection of the heating system can be moved to its launch. First, open the supplied valve equipment, then turn on the electric boiler.

Pay attention to the performance of temperature and pressure sensors. The nominal values \u200b\u200bare indicated in the instructions that are included. With explicit deviations, it is better to call the masters.

We also provide to your attention visual example Installation work:

What can be saved on?

Electric heating is quite expensive compared to gas. To make it economical, it is recommended to take into account the following tips:

1. Purchase electricity and turn on the heating at night. In the afternoon, everything is in operation and the need for the functioning of the boiler is absent. It is better to make a good room at night, because at this time the price for 1 kW of electricity will be significantly less.
2. Use automation that will allow you to turn on the heating at a certain time or only with a decrease in the temperature to the set value. In this case, the unit will work only at extreme need.
3. The highest heating radiators is achieved by placing the boiler at the lowest point of the heating system.
4. Add to heating modern solution - It will make it more efficiently using consumable heat around the room.
5. We return to the use of two-timers. Another option to rational use For heating - buy heat accumulators. These containers with water can warm the room throughout the day, while the liquid will be heated at night (when electricity will cost much less).

Video instructions for connecting an electric boiler with their own hands

9

Starting boiler

A warning: Input of the boiler B.
operation and its first start should
be produced only certified

protherm by Protherm
specialized organization!

Performing the first start of the boiler, make sure
that:

1. The boiler is connected to electrical network and

in this case, the phase and zero are not confused.

2. Opened gas locking crane;
3. Service cranes for heating and DHW

4. Pressure in the heating system is located

in acceptable limits of 1 - 2 bars.
Install the main switch (Fig. 1,
pos. 7) In position is on (I). Boiler
turns on and starts working in mode
heating water in a boiler (if the boiler
connected to the boiler). After water heating in
boiler boiler switches to mode
heating (provided that the mode
heating is active). In case of protective

disable boilers on the panel display
management will appear about
faults (see "Messages about
errors ", p.8). Use the button
Reset (Fig. 1, pos. 6) Unlock
boiler. If after switching on, protective
disconnection will repeat, or impossible
will unlock the boiler
contact your service organization.

Turning off the boiler

With short-term shutdown of the boiler
install the main switch (Fig.
1, pos. 7) Turn off (o).
When you turn off the boiler for a long
period needs to turn it off from
electrical network and overlapping
gas to the boiler. If in winter boiler
not used, then the heating system
it is necessary to empty. but
it is necessary to avoid frequent plots and
supplication of the heating system to avoid
formation scale and deposits inside
boiler.

Start and turning off the boiler

Adjusting the boiler

Operation of the boiler without room
regulator

according to the readings of the boiler sensor. IN
clepting XT5 on the clamps 5 and 6 stands
jumper (factory setting). Order
settings:

Turn on the boiler with the main switch;
Set the desired temperature

the feed line on the control panel.

Operation of the boiler with room
temoregulator

In this mode, the boiler supports
set temperature in the heating system
on the room regulator. Jumper,
installed in the XT5 terminal on the clamps
5 and 6, removed. It connects to her place
room regulator. If indoors
with room regulator on radiators
installed thermostatic valve,
need to translate them in full
open position.
A warning:On the control panel

Value

Malfunction
rouge sensor
temperature

Boiler works without restrictions, but temperature

the coolant is adjusted by a boiler sensor (see
"Installing heating temperature", p. 5).

If the boiler does not work in the excitermic mode, then
this message can not appear.

Heating equipment is needed to ensure comfort in rooms. Electric boilers of heating Protherm stand out high quality and long service life among competitors.

PrTherm is a popular manufacturer of heating equipment in Europe. In the heat engineering market, the company declared itself as a manufacturer of high-quality boilers.

Branches I. service centres Protherm is on all continents. The range of the company is more than 100 models of boiler units designed for all Consumer classes related to heating equipment and components. Innovation of the manufacturer are condensation boilers.

A distinctive feature of Protherm is the availability of services throughout the country. Service is carried out both by their masters and with the involvement of masters of partner companies.

Types of boiler equipment rubber

By installation method:

• wall mounted (installation is provided in niche);
• hinged;
• outdoor (the boiler is installed directly on flooring - It is considered the best option For private houses).

Device

All models of boiler equipment with a rubber consist of the main nodes:

• Tan. Teni models of medium and high power consist of several elements (blocks). Three-phase consist of three single-phase. For each phase, it is necessary to install a separate voltage relay (to prevent phase skew).
• Electronic control unit. Includes an intermediate relay, fuses, terminal clamps, power supply, etc.

• Dean Rake. Which is installed modular equipment: Relays, differential machines or Uzo, voltage stabilizers and grounding.
• Circulation pump. To discharge the coolant into the system and maintain working pressure in contours.

Important! The pump is built into the boiler housing. All connections and commissioning are manufactured by the manufacturer, so the manufacturer's warranty also applies to it.

• The case of the device in which all nodes are installed, power wires and heating pipes are connected.

Automation of equipment

Automation and measuring instruments are intended for monitoring and preventing emergency situations when operating boiler equipment with a rubber.

The function of the equitermic measurement of the temperature saves the consumption of electricity depending on weather conditions: On the warm days, the boiler operates at minimum power, in cold - with maximum load.

Composition of electronics:

• Safety valve (to prevent overpressure in system).
  Corporate device.
• UZO. Protects people and animals from leakage currents when touching the body of a faulty device.
• Load regulator relay. When you turn on in the household network of electrical appliances, the relay automatically smoothly lowers the boiler power. If the network is normalized, the automation provides a device in normal operation.
• Temperature relay. When the temperature drops in the room to 8 degrees, the pump is launched. To work this feature it is necessary to connect the air temperature sensor.
• The control panel is equipped with a messages and boiler power settings. For models of medium with several tanks, it is possible to work in operating modes with a reduced load.

• Installation should be made in accordance with the applied instructions for each model. Protherm recommends use the services of a professional service, because In this case, warranty on maintenance and repair will be valid.

Important! With independent mounting equipment, damage to the body, which can lead to a violation of the warranty obligations by the consumer.

• The installation site should be carefully thought out: the boilers should be in easy accessibility to inspection and maintenance. Measuring instruments should be in a prominent place.
• If a circuit with forced circulation is applied, the boiler unit should be installed at the highest point of the heating system.
• When mounting multiple boilers in the room, you must use a parallel connection.
• The cable cross-section, the power of circuit breakers and the Uzo must be selected taking into account the power of the boiler and the circulation pump.
• In the house it is necessary to ground the TN-C-S or TN-S type, the heating system devices must be grounded.

For the correct operation of the device, it is necessary to configure it correctly:

• Connect the boiler to the household power grid.
• Set the temperature of the heating system.
• Configure Operating Pressure and Power Parameters.
• Start equipment. In the absence of failures in the work of the unit within 3 days, the installation is considered successful.

Single-mounting boilers line

Separate Protherm segment introduced single-circuit electric boilers. SCAT series is designed for heating and hot water supply residential houses and administrative buildings In the absence of gas supply. Installation wall.

Models are produced with a rated power from 6 to 28kvt with the possibility of connecting measuring instruments (thermostat and pressure gauge) and voltage stabilizers.

The advantages of the line:

• high installation efficiency;
• fast heating of rooms;
• easy installation, no need for permanent maintenance;
• environmental Safety;
• full process automation;
• standard connecting thread for connecting pipes 3/4 ";
• silent;
• anti-gas meal function;
• high accuracy of adjusting operating parameters;
• low electricity consumption;
• lack of the need for a separate room to install the unit;
• lack of chimney;
• ability to work from the network 220 and 380 V.

Important! All models of the scat line are equipped with displays and a convenient control panel, a soft start function and pump elevation.

A brief overview of the models

• 6 square meters In the diagram, two heating elements of 3 kW. Basic application - residential buildings.
• 9 kW. The heat exchanger consists of two nodes 6 and 9 kW, respectively.
• 12 kW. Heating elements two (6 kW).
• 14 kW. The device includes 2 elements of 7 kW.
• 18 kW. Boiler equipment high power is intended for heating large administrative premises. The unit includes 3 heating nodes (6 kW).
• 28 kW. The most powerful models. The heat exchanger is arranged from 4 elements of 7 kW.

Important! Large power protherm boilers can be installed in the diagram in parallel.

The cost of production of Protherm depends on the specifically selected model and configuration, presence, type and period of warranty. Low power models can be purchased from 10,000 rubles, the cost of high performance boilers reaches several hundred thousand rubles.

Conclusion

Electric boilers of Protherm Skat Rutter - the best decision For heating and hot water supply of residential and administrative buildings, where the connection to the gas supply system is difficult or missing.

High efficiency and low power consumption completely pays off the cost of equipment and installation for several heating seasons.