House, design, renovation, decor.  Courtyard and garden.  With your own hands

House, design, renovation, decor. Courtyard and garden. With your own hands

» Buderus Logano specifications. Choosing Buderus boilers: technical characteristics

Buderus Logano specifications. Choosing Buderus boilers: technical characteristics

Work up to 12 hours, from one fuel tab.

Maintenance of the set temperature without human intervention. Easy to clean and maintain. Non-volatile.

Model range (kW) 12, 20, 24, 25, 32, 45

The extraordinary popularity of solid fuel boilers Buderus logano S111, caused by the design of the maximum automation of the boiler, without the participation of electricity, which significantly increased the comfort of operation in non-volatile heating systems. There is no need to "stand" over it, the boiler will do everything by itself. All that is required of you is to put fuel on time 2 times a day and remove ash as needed.

The steel solid fuel boiler Buderus Logano S111 has been developed since 1968, during which time a successful design with a semi-automatic principle of operation was obtained, using the natural laws of nature, such as the force of gravity and thermal expansion. Let's take a closer look design features this wonderful boiler.

Semi-automatic fuel supply

Vertical loading from above made it possible to automate the fuel supply using natural gravity. As it burns, the fuel sags under its own weight into the combustion zone, feeding a new batch at the right time.

After firing up the boiler and entering the operating mode, it is possible to fill in more raw coal or firewood, by the time it approaches combustion it will be already dried and prepared for combustion, which increases the efficiency of fuel combustion. (This condition applies to boilers from 20 kW and above)

Burning time of one fuel tab, up to 12 hours

The large loading hopper has increased the time interval required to load a new batch of fuel. The boiler can be approached literally 2 times a day, in the morning and in the evening, adding a new batch of coal or firewood and removing ash if necessary.

High energy efficiency, up to 86%

The design of three-fold bending of flat heat exchangers significantly increased the efficiency of heat transfer to the heating system water. When passing through heat exchangers, hot flue gases have time to transfer heat and cool down to a temperature of 100 - 250 degrees, while in conventional furnaces the outlet temperature is about 600 degrees.

Refractory bricks (chamotte) in the boiler structure

Fireclay refractory bricks used in the construction of the boiler have several functions. Placed in the place of direct contact with the burning fuel protects the colder heat exchanger (up to 100 degrees) from sticking of resin and slag, as well as heating up, prepares a new batch of fuel for combustion and completely burns out the unburned part in case of sticking.
Another part of the chamotte, located above the combustion zone, stops the incandescent gases going into the channels of the heat exchangers, which contributes to better heat transfer to the heating water.
And also, glowing, it burns out volatiles released from the fuel during combustion, thereby achieving more complete combustion fuel.
For combustion of gases, additional air is supplied to the zone of red-hot chamotte through air ducts arranged along the sides of the boiler. The air supply is regulated by special dampers.

26% more energy efficient than conventional boilers

As a result of the above decisions, boilers Buderus Logano S111 achieved high energy efficiency, it was 84% ​​on coal, 86% on wood.

For example, the energy efficiency of high-quality boilers of classical design reaches only 60%.

Automatic temperature control

The opening and closing of the combustion air damper is carried out by an automatic temperature controller, known from the US Honeywell company. The principle of operation is based on the thermal expansion of a substance that is sensitive to changes in the temperature of the boiler water.
When the set temperature is reached, the valve reduces the air supply, when it falls, it increases, automatically opening, closing the air damper.
There is a scale on the valve that allows you to accurately set the required water heating temperature.
After setting the temperature, the valve maintains the temperature at the same level without human intervention. Adjustment range, from 60 to 95 degrees.
The valve also protects the boiler from boiling and overheating.
The air damper has a viewing window to control fuel combustion.

Shaking lattice

The specially designed grate system eliminates the need to open the lid and stir up the coals with a poker. To shake the grate, it is enough to lightly shake the lever on the left of the boiler. Ash and burnt residues will be collected in an ash box under the grates.

Workmanship.

German boilers Buderus Logano S111 are produced in Europe at the Czech plant Dakon, which is part of the international concern Buderus.
The special heat-resistant boiler steel used in the construction of the boiler has a service life of at least 25 years.

Delivery

Delivery in Yekaterinburg and to the suburbs:

Delivery of goods in Yekaterinburg + 30 km, with a total cost of more than 15,000 rubles (and this is almost all goods) is free of charge.

If the order value is less than 15,000 rubles, the delivery cost will be 500 rubles.

Delivery in the Sverdlovsk region:

Delivery outside the city for removal over 30 km is considered at a rate of 10 rubles / km (it is considered in both directions). For example, if your house is located 40 km from Yekaterinburg, the cost of delivery will be 880 rubles (40 km х 2 х 11 rubles).

Delivery to other cities of Russia:

We will deliver the goods free of charge to any transport company in Yekaterinburg, transportation between cities is paid by the buyer at the rates of the transport company.

Together with the order, all the necessary documents will be sent to the buyer or transferred to his representative in Yekaterinburg.

Payment Methods

Cashless payments for legal entities.

If you want to make a payment in this way, then when placing an order through the basket, you must specify the contact information, as well as write the details of your company in the "buyer's comment" field. The manager will prepare an invoice and then contact you.

By bank card.

Payment for goods with a plastic card Visa, MasterCard at the company's office at Krestinsky 46a office 704. Remote payment to a Sberbank card is also possible.

Cash.

Cash payment is possible upon receipt of goods from the warehouse or at the time of delivery.

In the transport company KIT.

This method will be convenient for those who are in other cities. We have concluded an agreement with KITot and you can pay for the goods upon receipt at the terminal of the transport company. ATTENTION KIT deducts its commission for this service: 1% of the total amount of the order.

Boiler service

Service maintenance of the boiler room must be carried out at least 2 times a year.

The cost for different boilers is different. The service price starts from 8000 rubles.

When ordering the installation of a boiler room in our company service maintenance 1 year FREE

List of works:

  • Measuring the gas pressure in the supply line
  • Measurement and adjustment (if necessary) of the starting and working gas pressure.
  • Measurement of photocurrent, ionization current (if necessary).
  • Checking the automatic control of the burner.
  • Measurement and adjustment (if necessary) of oil pressure in the burner.
  • Determination of the composition and temperature of waste gases.
  • Checking the fuel filter (gas / diesel).
  • Checking and replacing injectors (if necessary).
  • Determination of the boiler efficiency.
  • Cleaning the combustion chamber (if necessary).
  • Checking the sensors and thermostats of the boiler.
  • Checking and adjusting the automatic control of the heating circuit (if necessary).
  • Checking the boiler safety group.
  • Boiler safety group check.
  • Checking the igniter.
  • Checking the sensors and boiler automation.
  • Cleaning the boiler, replacing the anode electrode and gaskets (if necessary).
  • Checking circulation pumps.
  • Checking the mixing unit.
  • Checking the parameters of the supply network.
  • Checking gas shut-off valves.

Guarantee

Factory warranty:

The Buderus manufacturing plant gives a guarantee for all its products for 24 months from the date of commissioning, but not more than 36 months from the date of sale.

Gift guarantee:

If you order a turnkey installation of a boiler room in Buderus66, then in gratitude for your trust in us, we will add you another 1 year warranty for equipment from our company.

Documentation:

  • Installation instructions.
  • User manual.
  • Warranty card.
  • Packing list.
  • Invoice.

Buderus Logano S111 boilers operate on any solid fuel. This makes them one of the most functional on the market. Consider the features of these boilers and the feasibility of such an acquisition.

Features of boilers Buderus Logano S111

Boilers of this series are manufactured in different standard sizes and offered capacities, from 12 to 45 kW. Due to the design features, it became possible to combine boilers with heating boilers gas powered or diesel fuel... In addition, the line of Buderus Logano S111 models has found its application in pumping systems... Some models come with a built-in protection and blocking system of the heat exchanger already in the factory in order to avoid overheating of the boiler.

To date, the following line of Buderus Logano S111 models is presented on the market:

  • Logano S111 12,
  • Logano S111 16,
  • Logano S111 20,
  • Logano S111 24,
  • Logano S111 25MAX
  • Logano S111 32,
  • Logano S111 32D,
  • Logano S111 45D.

The numbers after the index "111" indicate the maximum power of the solid fuel boiler in kilowatts. All models have a combustion chamber open type, wherein hot water supplied to the heating system in a single-circuit scheme. The symbol "D" denotes models with an enlarged firebox, in which wood and logs up to 50 cm long are used as an energy source. In this case, the moisture content of the wood should not exceed 28%. The efficiency of all models ranges from 72 to 82%, depending on the quality and type of fuel used.

Due to the presence of an ash pan and a volumetric combustion chamber in the boiler for heating the room, it is necessary to fill with fuel only twice a day.

Characteristics of the Buderus Logano S111 boilers

All models of the Buderus Logano S111 series are distinguished by high efficiency and good performance. Thanks to the wide lineup it became possible to choose a model to your taste:

1. Logano S111 12:

  • minimum / nominal power: 7 / 13.5 kW,
  • Efficiency: 80%,
  • Fuel consumption kg / h: 3.2.

2. Logano S111 16:

  • minimum / nominal power: 6/16 kW,
  • Efficiency: 80%,
  • Fuel consumption kg / h: 4.7.

3. Logano S111 20:

  • minimum / nominal power: 6/20 kW,
  • Efficiency: 76%,
  • Fuel consumption kg / h: 6.

4. Logano S111 24:

  • minimum / nominal power: 7/24 kW,
  • Efficiency: 76%,
  • Fuel consumption kg / h: 7.6.

5. Logano S111 25MAX:

  • minimum / nominal power: 8/27 kW,
  • Efficiency: 76%,
  • Fuel consumption kg / h: 7.9.

6. Logano S111 32:

  • minimum / nominal power: 9/32 kW,
  • Efficiency: 76%,
  • Fuel consumption kg / h: 8.9.

7. Logano S111 32D:

  • minimum / nominal power: 9/28 kW,
  • Efficiency: 78%,
  • Fuel consumption kg / h: 8.4.

8. Logano S111 45D:

  • minimum / nominal power: 18/45 kW,
  • Efficiency: 82%,
  • Fuel consumption kg / h: 14.

In order to ensure a consistently high performance, it is necessary to take care of a good draft in the chimney in advance.

General information about boilers Buderus Logano S111

Even a special search for negative reviews about the boilers did not give anything. Although, it would seem, for more than three hundred years of existence of the brand, flaws should have appeared. Nevertheless, no matter how difficult it is to believe it, there is no negative information.

For all modern models boilers have a 2-year factory warranty at the time of start-up. When used correctly Maintenance is required once a year and is carried out by the installer during the warranty period.

Of course, quality costs money. On the other hand, a miser pays twice and it is easier to buy reliable and durable equipment once than to change components every year.

The equipment requires proper maintenance, therefore, when purchasing a boiler, it is necessary to carefully study the operating instructions. In terms of the heating level, this boiler can only go to the Buleryan stoves, which, with an average price value of five times less, heat the house no worse, and the time spent on heating is less. Hence the conclusion: it is worth first consulting with several specialists to determine what type of boiler to install in your house.

119 151 rub.

Vendor code:
8732204651

Best price

Found it cheaper? Call us and we will provide the most advantageous personal offer!

Shipping and payment

Buderus Logano G234-38 WS designed to continue to operate reliably even at a gas pressure of 10 mbar. It is as reliable and durable as possible when operating in low temperature conditions. This became possible thanks to the use of a special gray cast iron, a unique development of the Buderus company.

Buderus Logano G234-38 WS - features of a floor-standing gas boiler:

  • The new design with a black front panel makes it easy to fit into any room.
  • Perfect for installation in townhouses and cottages up to 380m2.
  • It can only be used for heating water in the heating system and hot water supply.
  • Can be easily combined with the Logalux ST and SU water heaters.
  • Supplied assembled with built-in atmospheric burner for any type of gas.
  • Easy maintenance due to minimal soot formation during fuel combustion.
  • Smooth regulation of the boiler water temperature.
  • Thermal insulation 80 mm thick.
  • Adjustable feet for easy height leveling.
  • Ionisation flame control and double solenoid valve.
  • The boiler heat exchanger is made of cast iron GL 180 M with special fins.

Depending on your requirements, you can equip it with a Logamatic 4211, Logamatic 2101 or Logamatic 2107 control system. Any of them can be upgraded with additional functional modules MM100 / 200, KM200, MC400, MS100 / 200. Compatible with regulators BC30E, RC100, RC200, RC300, RC310.

Control system capabilities:

  • Work in weather-dependent mode.
  • Control by signal 0-10V.
  • Internet connection.
  • Boiler and boiler control indirect heating, recirculation line, 3-way valve, cascade, solar system, mixing valve.

The modern floor-standing gas cast iron boiler Buderus Logano G234-38 WS is characterized by maximum efficiency and economy. Its efficiency reaches 92%. Due to its compact size and low noise, it can be installed practically in any room.

The German company Buderus merged with a well-known company a few years ago in order to start a joint production heating equipment... On Russian market the company came out only ten years ago, but its products have already proven themselves from the best side and have good feedback both specialists and the consumers of the products themselves.

Let's talk about Buderus heating boilers for solid fuels with a thermostat. Consider the main sizes and specifications.

Buderus boilers: technical characteristics

Solid fuel heating brands Buderus Logano S111-2 series are used for heating a private house, residential and industrial premises with a total area of ​​50 to 450 square meters.

Buderus Cauldron It is used to work both in systems with forced circulation of the heat carrier (pump for circulation), and in gravity systems with natural circulation.

Solid fuel boilers Buderus can be used in parallel with and, as well as with boilers operating on any brand of diesel fuel. They can also be installed and installed in existing heating systems. The boilers are small in size, which will allow Buderus boilers to be installed in cramped living quarters or boiler rooms.

Buderus boilers for solid fuels with a capacity of 32 and 45 kW have a fairly deep firebox, up to half a meter long. The body of the boilers is made of high-quality heat-resistant steel, the heat exchanger and the furnace itself are made of cast iron, which tells us that the service life of the boiler will be at least 15-20 years.

loading solid fuel into the boilers from the top. Just lift the top cover and add fuel. This fuel can be wood, as well as coal or coke.

Solid fuel boilers Buderus are equipped with a thermostat with a temperature scale. This boiler thermostat heating is screwed into the boiler body from the side, a chain goes down from it to the damper, which automatically regulates the air supply to the boiler.

Boiler solid fuel Buderus with top loading and draft thermostat


With the help of this thermostat, you can set the desired temperature of the coolant in the water jacket of the boiler, upon reaching which the damper is triggered. In this mode, one bookmark of firewood is enough for 6-7 hours of work.

On front side The boiler is equipped with a thermomanometer, which, if necessary, allows you to monitor the temperature and pressure in the system. To protect against overheating of solid fuel heating boilers Buderus, you can purchase a water cooling circuit, it is not included in the scope of delivery.

It is also possible to install a gas burner for. When purchasing, be sure to check the equipment in accordance with the operating instructions for the Buderus boilers.

How to choose the right Buderus boiler

Everything is very simple here. It is necessary to remember the basic rule for the selection of almost any heating equipment, knowing its thermal power and the area that needs to be heated.

One kilowatt of power corresponds to heating 8-12 square meters of an insulated room, with a standard ceiling height of 2.5-2.7 meters.

Buderus presents a line of boilers of the Logano S111-2 series with a thermal power of 12, 16, 20, 24, 27, 32, 45 kW. This means that for heating a house with an area of ​​100 sq. meters, a boiler with a capacity of 12 kilowatts is enough.

Buderus boilers: prices for manufactured products

Today floor-standing boilers Buderus Logano S111-2 with a capacity of 20 kW have a price of about 50,000 rubles *, and a water circuit for cooling is 5,000 rubles. * The cost of Buderus boilers depends entirely on the Euro exchange rate.

Watch the video

The boilers are manufactured in Germany, which speaks of the high quality of the goods, but the prices are accordingly higher than for solid fuel boilers domestically. But if you decide to buy a high-quality solid fuel, then you should not save on this. The German quality of the product will allow your boiler to serve for many years.

* - prices are as of September 2014