In a country with such a harsh climate as Russia, high-quality heating of private residential buildings is not only a matter of comfort, but also of safety. That is why most people who decide to move from an apartment to a private house, take the issue of heat supply very seriously.
Option for planning a house with a boiler room
Of course, at the planning stage, they are most interested in projects of houses with a boiler room. The room for the boiler room, provided for in the design, usually meets a number of requirements imposed on it by specialists and ordinary users. And every person who orders a project of their future home from a specialized company needs to know about them. In addition, you need to know what stages you will have to go through when designing a house with a boiler room.
It is especially difficult to comply with all the norms if you order a project of a small one-storey house from the boiler room. Since in this case it is necessary to comply with safety requirements and not to occupy too much space, otherwise the area of other rooms in the cottage will decrease.
Today, in order to install a heating boiler in your private house, you will have to go through a number of difficult procedures, both technical and legal.
Installation diagram heating installation in a two-story house Of course, to start work without knowing about them is simply rash and even stupid. So, what stages is it customary to break down all the work?
In most cases, going through all these steps is enough for you to be able to install all the necessary heating equipment in your new home.
A heating boiler, even if all the required safety rules are observed, is a source of increased fire hazard. Therefore, the choice of the place where it will be installed should be approached very responsibly and seriously. It is necessary to consider not only the cost of placement and safety of operation, but also the ease of use. Based on this, there are three main ways to locate the boiler room.
The first is outdoor placement. It should be said right away that this method is as costly as it is safe.
Of course, on the one hand, the location of the heating boiler 5-10 meters from the house guarantees that in the event of a gas leak or diesel fuel or accidental fire solid fuel, your home will not be threatened.
But keep in mind that you will have to develop a separate drawing, fill in an additional foundation, think about carrying out external engineering networks and their thermal insulation.
pouring foundations for the boiler room You will have to spend a lot of money and time. And the usability is significantly reduced.
Secondly, if the projects of houses with a boiler room were developed initially taking into account the installation necessary equipment, then you can place the heating boiler on the ground floor or even in the basement. Most people prefer to place it in the basement. Then you don't have to allocate 15-16 square meters. useful area on the ground floor, which means that the vacated area can be used more profitably.
To install a diesel boiler or solid fuel boiler, it is imperative to provide a separate room: when burning coal, firewood, peat or diesel fuel, a large amount of smoke is emitted, which can cause certain problems to the inhabitants of the house. Well, even the most economical owner can allocate 15 square meters, building luxurious two-story houses with a boiler room.
Floor plan of a two-story house with a boiler room If you prefer an electric heating boiler or not too powerful (no more than 30 kW) gas boiler, then you can install the equipment in the kitchen. Modern equipment is small in size, so it is not striking and does not take up extra space. If you wish, you can even pick up special wall-mounted boilers, which practically do not take up useful space in the room.
Of course, the kitchen should have high-quality ventilation, and it will never be superfluous to simply monitor the condition of the equipment.
After all, the slightest gas leak is enough to destroy whole house, together with the people living in it.
And finally, an option that allows you to combine the advantages of the two described above and at the same time, partly get rid of their disadvantages. When wooden houses with a boiler room are designed, a small extension must be foreseen in advance.
Project wooden house from the boiler room A foundation is also poured under it, which is part of the main foundation. The extension is in most cases made of lightweight materials ( frame construction), which allows you to save a considerable amount during construction. This simplifies the organization of high-quality ventilation. As a result, you get a boiler room, which is located in the immediate vicinity of the house. Thanks to this, you do not have to spend extra money on laying the pipeline.
At any time, you can enter the annex both from the side of the house and from the street: in most cases, extensions are equipped with two doors. If a gas leak (carbon monoxide or explosive) occurs, the risk of serious damage to the main building is minimized. Therefore, an extension to the house allocated for a boiler room can be called the optimal solution.
Regardless of where you decide to install the heating boiler - in a house, in an annex or in a separate building, the room must meet certain requirements. And for different types Boiler requirements are also different.
For example, if you are building a frame house with a gas boiler room, then the area of the boiler room should be at least 15 meters with a height of 2.2 meters. However, this only applies to heating boilers with a capacity of no more than 30 kW. If you are using a boiler with a capacity of 30 to 150 kW, then the ceiling height should be at least 2.5 meters. Also note that you cannot store a gas tank (whether it be cylinders or another container) in the same room with the boiler, in order to avoid a fire and a terrible explosion.
For boiler rooms with solid fuel boilers the area can be reduced to 7 square meters, and you can choose the height that seems sufficient for you.
If you are using a hinged boiler, then make sure that the boiler room scheme provides for one wall built of non-combustible material (brick or concrete). When choosing a heavier floor-standing boiler, make sure that the foundation of the boiler room can withstand this heavy load. Of course, the floor must have a completely non-combustible coating. While creating heating system in an annex or on the street, it would be better to fill the floor with concrete. If you are installing the boiler indoors, it will be enough to put a sheet of steel of sufficient thickness on the floor.
You should not save on component parts. Yes, buying high-quality smoke detectors, bypasses, shut-off valves and other equipment in a specialized store, and not in the market, you will spend several hundred or even thousand rubles more. However, in this case, you will be sure that each part is made of high quality materials, and not brittle alloys that cannot withstand significant pressure and frequent temperature changes.
Connection diagram for a solid fuel boiler in a boiler room This means that you guarantee the safety of yourself, your loved ones and your property. Isn't it worth the extra thousand rubles spent? In some cases, it is necessary to bring a sewer drain to the boiler room. Condensation will drain there, which, under certain circumstances, arises in the chimney of the heating boiler.
In general, the layout of a house with a boiler room consists of many calculations, complicated by the fact that it is necessary to take into account every little thing.
After all, it is important not only to correctly calculate the power of the installed boiler, but also to select the appropriate equipment based on the size of the premises, the thickness of the walls, the area of the windows, the strength and direction of the wind in the region, and the temperature (average for winter and extremely low). Therefore, most people prefer not to even try to draw up a plan on their own, entrusting this extremely difficult and responsible work to specialists.
Yes, because of this, the already expensive operation of installing a heating boiler turns into the most expensive of all installation procedures. engineering systems... But you can be sure that nothing threatens your family and you personally. And that even on the coldest winter days, when a blizzard is howling outside the window, you will be warm and feel really comfortable.
What was done
Project: the Innsbruck project was adapted to the site and the wishes of the customer's family, a solution was proposed to move the terrace.
foundation: based on geology and the architect's calculations, the house was erected on a pile-grillage foundation.
floors: basement - solid concrete; interfloor - reinforced concrete floor slabs.
box: walls made of aerated concrete blocks, laying on masonry glue. Windows are made to order, with one-sided lamination, on-site installation.
roof: metal tiles.
exterior decoration: walls are insulated with basalt facade insulation and plastered, finishing elements are made of wood, made on site, based on TZ-visualization, painted. Plinth lined decorative stone.
interior finishing: finishing was carried out according to the design project, where the combination was taken as a basis decorative plaster with stone and wood. False beams were installed on the ceilings.
additionally: a fireplace is installed and finished.
What was done
The very case when our Customer and we speak the same language and are inspired by the ECO high-tech style! Designer Ilya came to us with a ready-made Design of his future home! Our team liked the project - after all, such unusual and stylish solutions it is always a professional challenge!
We prepared estimates for Ilya and developed unique design solutions - all this allowed us to implement this project! Frame house executed in our verified Canadian technology with 200 mm insulation along the entire contour! Outside, the house is sheathed with imitation timber. All windows are made according to individual order and laminated in the colors according to the project. Additional accents are highlighted by the professional timber imitation dyeing and color matching.
What was done
What does it cost us to build a house? Indeed, having a team of professionals and knowledge - building a house from scratch is a matter of time! But sometimes the task is more difficult! We have introductory - an already existing foundation, or buildings on the site, extensions to the already standing buildings and much more! For the Matsuev family, it was just such a difficult task. They had a foundation from an old burnt-out house, and a landscaped area around it! The new house had to be built in a short time on the existing foundation. Dmitry and his family had a desire to build new house in high-tech style. After careful measurements, a project was made that took into account the old layout, but had a new modern shape with interesting innovations! The house now has an entrance group, where you can sit at a table on cozy evenings and a complex but possible exploited roof in our lane. To implement such a roof, we called on our knowledge and modern Construction Materials LVL beams, bonded roofing and much more. Now in the summer on such a roof you can arrange an unusual dinner or watch the stars at night! In the decoration, our architect also emphasized the minimalist and graphic high-tech style. Smooth plastered walls with painted planken details, wood beams at the entrance added personality. Inside, the house is finished with imitation timber, which is painted in different colors depending on the purpose of the room! Large windows in the living room kitchen overlooking the plot - created desired effect illumination and airiness of space! The house of the Matsuev family - decorated our photo gallery in the section of suburban architecture in high-tech style, in a style that is chosen by courageous Customers with excellent taste.
What was done
Olga and her family have long dreamed of a country house! A reliable, solid home for life, which will perfectly fit into their difficult narrow area! With the advent of children, it was decided to make the dream come true, children grow up quickly and in own home nature offers plenty of opportunities and fresh air. We, in turn, were happy to work on an individual project for a house in classic style red brick with a bay window! After the first acquaintance with our company in a cozy office, we invited Olga to take a look at our existing construction site: evaluate the order and construction processes, storage of materials on the site, get acquainted with the construction team, and make sure of the quality of the work. After visiting the site, Olga decided to work with us! And we were glad to do our favorite job again to make another country dream come true!
What was done
Project: changes were made to the San Rafael project and redevelopment was made according to the wishes of the Customer.
floors: basement -zhb floor slabs; interfloor - reinforced concrete floor slabs
box: walls made of expanded clay concrete blocks, laying on mortar ??? Windows inserted.
roof: metal tiles
terrace: rough enclosing elements are made, flooring is made.
What was done
Dmitry contacted our company with an interesting draft design to calculate the cost. Our experience allows us to carry out such calculations for draft designs with minimal errors, no more than 2%. Having visited our construction sites and received the construction cost, Dmitry chose us from many of our colleagues in the workshop to complete the project. Our team has started to perform a difficult and expressive country project with spacious rooms and a garage, large windows and complex architecture. After the delivery of the project, Dmitry chose us as a contractor company, and we, in turn, wanted to do further work on the same high level! Since the object is large, Dmitry proposed a step-by-step cooperation, namely, upon successful completion of the foundation work, we proceeded to the second part of the project - walls + ceilings + roof. Also, for Dmitry, the exact timing of construction was important, in order to speed up the construction processes, the team was strengthened by 2 experienced bricklayers.
The box on the pile-grillage foundation was delivered on time! The result pleased us and the customer. All stages of work were coordinated and worked out for Dmitry and his individual project, from which all participants in the process benefited!
What was done
Project: The project of our company, Inkerman, was changed taking into account the wishes of the Customer's family, the house was planted on the site, taking into account the existing situation on the site and the relief
foundation: based on geology and the architect's calculations, the house was erected on a reinforced pile-grillage foundation.
floors: wooden wooden beams, in places of large spans, installation of LVL beams. The basement floor is insulated with 200mm basalt insulation; interfloor overlap with noise insulation 150mm.
box: box: walls made of expanded clay concrete blocks, laying on mortar. Windows inserted.
roof: installation of metal tiles.
exterior finish: the facade is insulated with 100 mm basalt facade slabs, the facades are covered with facing bricks; color solution proposed by the architect and agreed with the customer.
What was done
The Krutov family decided to build a spacious house for the whole family!
Olga and other family members went from idea to implementation in several stages! The choice of technology, long work on the project, construction of the foundation, construction of a house with exterior decoration and then work on interior decoration! The frame technology was chosen as energy-saving, pre-fabricated and high-tech! Why did the Krutovs choose our company? They liked the quality of work on our construction site and the workers who gave a detailed tour! We also worked on the estimate for a long time, combining different variants finishes, comparing their cost. This made it possible to choose the best option from a wide variety of finishing materials and configurations.
The project was created by a friend of the architect, but we had to work out the constructive part of it. After that, the most reliable and effective foundation was erected - the UWB. Next, work began on the box. Frame house with 200 mm insulation along the entire contour and unique technology roof insulation of 300 mm. For the exterior, siding was chosen in a spectacular combination of colors - coffee and cream. The accents are highlighted by the powerful overhangs, the interfloor belt and large windows!
What was done
When you decide to become the proud owner of your own home and move into a new home for permanent residence, first of all, you think about what the house will be like; what to build it from; how much will it cost and, most importantly, WHO will do all this?
Alexander, came to our company with the desire to move to his own Vacation home... He liked the Avignon project and was already on the site strip foundation... After the initial visit to the site, measurements and examination of the foundation, we gave our conclusions and recommendations. Strengthen the foundation, change and adapt the project to the dimensions of the existing foundation! After agreeing on the cost, it was decided to build in winter. Alexander received as a gift reinforced concrete floors, one of the leading construction teams and a house according to the project he liked, which stood on a site with an external finish by spring! Alexander watched every stage of construction, regularly visiting the construction site and was satisfied with the result, and we were with our work. This is an individually designed Avignon project, realized in stone technology with external insulation and siding!
What was done
Each house is a separate story of creation and implementation! Once we built a house for good people and they recommended us to another good person! Andrey Rumyantsev came to our company with a desire to replace the old country house to build a one-story spacious country house with a fireplace for warm family evenings ... It was decided to build the house from aerated concrete blocks so that the future handsome country house would delight the owner for decades! The customer voiced his wishes for finishing - and we, in turn, brought everything to life. Thanks to the detailed visualization of the project, each element of the exterior finish is a member of a friendly ensemble! Bavarian masonry, as the final stage of exterior decoration, looks noble and solid. Without a doubt, such a tandem - aerated concrete and brick can be safely called the best solution in the field of stone housing - warmth, affordable, beautiful, reliable. Modern technologies have stepped forward so much that such unique configurations become available in a short time, because we built this project during the winter months. The main thing is to have the necessary knowledge and constantly replenish their stock!
What was done
Project: the project of a European company was taken as a basis and was adapted to the site and the wishes of the Customer's family, a terrace and patio were proposed, taking into account the cardinal points of the Customer's site.
foundation: on the basis of geology and the architect's calculations, the house was erected on a pile foundation.
floors: basement - solid concrete; interfloor - wooden on beams with 150 mm soundproofing device.
box: walls made of aerated concrete blocks, laying on masonry glue. Windows are custom made with one-sided lamination, on-site assembly.
roof: metal tiles.
exterior finish: walls are insulated with basalt facade insulation and plastered. Drawing on visualization added facade panels under the stone "Tolento". The enclosing elements of the terrace, balcony are made of wood, made on site, based on the TK-visualization, painted. Roof overhangs are lined with soffits in the color of the roof.
| Vladimir Murashkin, The owner of the house "brought to life according to his idea and sketch!" House parameters: |
What was done
When Customers come to us with bright, modern ideas future home, we light up twice! After all, it is always interesting to work on a new stylish project and a kind of challenge, how to implement all bold ideas from a constructive point of view, what materials to use in this case? Vladimir bought a plot with picturesque views of the Oka River! This view could not be ignored, so a dizzying terrace (51.1 m2) and a large balcony, oriented towards beauty, became an indispensable attribute of the future house! Vladimir wanted to have a rest in nature in wooden house, but it was necessary to build a house in a short time and the ideal solution for such tasks was frame technology construction! If you are to be different, then in everything! The house was made even more spectacular by a vertical finish imitating a timber made of durable larch, painted in natural shades with an emphasized wood texture. Laminated windows complement the modern look of the house! It turned out to be a great country house, with a twist and at the same time incredibly functional.
It all started with an individual project found by the Customer's family on a European website. It was with him that she first came to our office. We made preliminary calculations for the project, took a tour of the existing construction site, shook hands and the work began to boil! The architect improved and adapted the project for the site and the customer's family; the foreman "planted" the house on the site. On the fact of geological surveys, it was decided to put the house on bored piles. The frame has grown in a few weeks, then the roof, insulation, exterior decoration! Per winter period a house has grown on the site. The customer invited a third-party technical supervision, who monitored the process independently of our multi-stage control. The color of the color scheme for painting imitation of a bar was selected by our manager and here we have a bright and cozy country house of the Pushkov family's dreams!
The company "Russkaya Stroechka" manufactures and inexpensively erects turnkey houses from a bar with a boiler room in the Central and North-Western regions of the Russian Federation. These are functional and practical one-, two-storey buildings made from environmentally friendly, natural materials. The presented catalog contains 4 projects of houses with a boiler room.
Typical projects, implemented more than once in practice, allow you to accurately calculate construction costs and quickly get the finished result. If necessary, minor adjustments can be made to the finished project in order to adapt it to the individual requirements of the customer.
We offer our clients to buy a house made of timber of natural moisture (for shrinkage) or chamber drying. In the first case, you can additionally save up to 20% of the cost of the house, in the second, you can build a house immediately ready for use. We have our own woodworking production, so the price of the material is affordable for most of those who wish.
The profiled timber is delivered directly to the construction site. The form of payment is convenient for customers: 70% of the total price is paid after delivery of the material, 30% - upon completion construction works and putting the facility into operation.
Projects of houses from a bar with a boiler room are chosen by those customers who value useful space and want to use it as efficiently as possible. Building a house with a boiler room has several advantages.
The company "Russkaya Stroechka" has been on the domestic market for more than 5 years. Clients trust us, and we guarantee the quality of both material and construction work. Get advice and Additional information about cooperation, you can contact our specialists by toll-free phone. We are ready to start construction without delay!
A warm home where you can spend time with your family is what developers want when they choose a housing project for themselves for years to come. It is for them that we offer projects of houses with a boiler room. This room for placing heat generators allows you to competently and without extra costs organize heating of the building with any of the available energy resources.
The houses we offer from a bar with a turnkey boiler room are developed taking into account all building codes and safety regulations. Each type of boiler room requires knowledge and consideration of all the nuances of design. For example, gas boilers require a certain volume of the room, its height, the presence of exhaust ducts and supply grilles.
Boiler houses in the proposed projects are designed taking into account all the requirements for equipment placement. For example, the premises in which gas, solid fuel or liquid fuel boilers will be installed must have the following characteristics:
If projects are being developed for houses from a bar with a boiler room for placing heating equipment of a different type, all its parameters are calculated taking into account normative documents for these units.
Timber houses require special attention when designing boiler rooms. That is why it is better to order projects of such buildings from experienced specialists, such as our designers. We will develop an individual project for you for any requirements, and also offer you ready-made projects of houses for permanent residence with a boiler room of any number of storeys and layouts.
To order a suitable project for yourself, contact our specialists by contact phone numbers or through the feedback form and you will be offered the optimal development for your requirements. You can also choose your favorite project in the catalog on the site. Please note that any of finished projects can be processed to suit individual requirements.
Houses from a bar with a boiler room are created for winter use. The presence of a special combustion room indicates that this good project specially prepared for year round living.
The boiler room can be located both in a one-story cottage and on the basement floor. It depends on the wishes of the customer, the chosen project and the preferred heating system.
In most layouts of country cottages, the furnace is located on the ground floor. This is due to the fact that the lion's share of thermal heating schemes involves a reinforced circuit on the ground floor. The second floor is not heated so intensively, and is often completely devoid of heating.
A properly designed boiler room must meet all technical requirements, and be responsible not only for heating, but also for heating water.
Often, a bathroom and a toilet are located near the combustion room in order to provide a strong pressure of water.
When ordering a turnkey building, you need to understand which units and devices should be in the furnace. The optimal list looks like this:
They can work on coal, gas, wood briquettes and biofuels. For heating a cottage from a profiled bar, both mono-boilers (operate on one type of fuel) and combined solutions are suitable. They are capable of processing several different energy sources.
These are usually electric boilers. Less often gas water heaters of various capacities.
A large tank in which heated water accumulates. Usually its capacity does not exceed 150-200 liters. This is enough for 2-3 people during the day. The water in such a container can remain hot for a long time.
In addition, filters for coarse water purification, hydraulic separators, various elements piping, valves and electrical panel.
