Today there will be post-plagiarism. Monitoring various sites on the Internet, I came across one entertainment site on the topic of the forum about the ideas of the garage arrangement inside for all sorts of hard and not only. I decided to transfer photos and add my comments, because in the original article only photos. Therefore, do not be afraid at the bottom of the watermark of the site yaplakal.ru :). So, let's go.
This is how it is possible to fold from wood canopy for the car. The idea is good, but it is necessary to think about how to fix the walls - the linen from firewood is quite a shaky design and over time it is destroyed from the wind, that changes in the volume of wood from humidity and so on. But as a temporary solution is very nothing.
This is a classic genre - small things in banks. Such a shelf with banks is unless lazy, I did not describe in books and magazines, I met this idea to the constructor modelist of the 70s. And then the performance of ideas in the photo. Just and tasteful!
An excellent idea for storing small things is bigger than or more - a rack from the canister. We need plywood, jigsaw, handful of screws and old polyethylene canisters. It is better to take from Tosol (out of easier to wash) or from under the primer / impregnation. Tosol cans will be difficult to dial, but from under the primer, you can easily find in the desired volume at a construction site, having agreed with the foreman. They are usually not needed and thrown out like trash. And for the stability of the structure, it is possible to fix it to the wall so as not to be worse.
Here is another idea for storage. This time the canisters are used to pull the oil or coolant. All of the oil wash them for a long time and difficult. However, if you keep all the smallers of the type of metal buckets, then the oil drop on the contrary will protect them from rust. Although it looks very not aesthetic and look for something is not too nice.
Here is an example of how you can carefully close the observation pit in the garage. Typically covered with cropped boards, which are as desired. So with a random driving wheel, the machine does not fail to fall into the pit. But it is not too convenient to open a hole.
Here is an option from the grid and a corner. I doubt that the rolling of the car will endure, but it is easy to open-close the pit to work. Yes, and it can be seen that in the pit (and that it fell there.
Here are the methods of storing fishing rods and spinning in the garage at the wall. In this position, they will occupy a minimum of space. You can still use plastic clips for fastening plastic pipes on the walls. 
The idea is cool, but difficult to feasible. Wooden 2-ways are most likely taken from the construction site (a set of formwork for overlapping). They are not expensive, but they will have to buy new, since old after several use cycles have no presentable look). Boxes are quite voluminous, but I have not seen them on sale, except that IKEA store has something similar. And they will cost them wow! You can easily load such a design with such volumetric boxes, but the beam will not stand.
So as an idea for refinement under myself, I did not recommend that I do not recommend that!
This one interesting idea. Need a piece of plywood and a piece of foam. And in the foam it is easy to press all drills, cutters and the like slim tool. It turns out everything in sight and at hand. Rather, this is not a garage idea, but for a joinery workshop. But who said that only the car should stand in the garage, and it is impossible to make a joinery?!
I think that these ideas will be enough for you in order to start equipping your garage.
Almost every man in the house or in the garage there is a set of tools. Consequently, keep them in perfect order. How best to do this, tells a new review. Surely everyone can find in it who were interested in his examples of the organization of storage.
The usual average garage looks very climbed. The competent organization of storage systems will solve this problem. Instead of the next cabinet, equip the walls with various shelves and hooks, which will allow you to carefully place a lot of things starting from the tool ending with a huge boat and bikes.
In continuation of the topic, let's tell about anywhere.
Over time, under the roof of any car garage, a whole arsenal of various household supplies and household items have accumulated, which did not have place in the home environment, nor in the storage room.
To prevent the formation of a chaotic landfill, the intraference space is necessary to correctly organize. And this can be done with the help of a homemade shell-shallow system. It will allow us to carefully and rationally accommodate the things stored in the garage and thereby create the most comfortable conditions not only for car care, but also to solve everyday economic tasks.
The main purpose of the garage is the storage of the car. This means that the first thing the car owner should exclude possible encroachment on the property stored inside the property, that is, ensure the safety of the latter. An equally important issue is the right climatic regime in the internal space - the state of the car in no way should depend on the voices of weather or appetites of malicious microorganisms like fungus or mold. Another principles of organizing the situation in the garage - ergonomics - suggests that all under the roof facilities should always stand, lie or hanging in their place, without interfering with the passage, driving, cleaning or car care process. With this, it is extremely necessary that the indoors are present to the cleanliness and order, which are the key to not only the health of the car owner, but also its security when visiting the garage and the fulfillment of all kinds of economic or repair operations.
In accordance with these principles, at the first stage of the garage arrangement, you will need:
After finishing finishing work You can proceed to the final stage of the arrangement - the organization of the internal setting of the garage. To do this, make a detailed plan of the room and determine what and how it will be stored, in addition to the car.
Garage plan for passenger car with calculated sizes
As a rule, the racks and shelves are distinguished far from the entrance to the garage of the wall. If the size of the room allows, the shelves are favorably equipped and side walls. Special attention when lacking free space In the garage it is worth paying the space under the ceiling overlap, as well as the car itself. The shelves equipped at the top level will help unload the lower part of the room, taking things, the need for the use of which occurs from time to time.
Wooden shelves on metallic frame Under the garage ceiling
The configuration and dimensions of the shelving system depend on the size of the garage and the needs of its owner. The materials from which the shelves will be manufactured must be strong enough to withstand the weight of stored items. For example, tiers can be made of thick plywood or boards, and the frame - from metal pipes or corners, but other options are also possible.
Stellagte wood system for garage space
The method of assembling and installing the shelving system depends on the material to be finished in the garage room, as well as constructive features The Construction itself. In many cases, the shelves are hung on the walls, and the racks are installed directly on the floor. However, the shelves can be suspended to the ceiling, whereas to increase the stability of a separate shelving, its frame is often equipped with fasteners for walls, gender and ceiling overlap.
Open Suspended Rack System for Garage
When calculating the parameters of the shelving system, several points should be taken into account:
- The distance from the lower shelf to the floor is made at least 20 cm. It significantly simplifies the process of cleaning in the garage.
- The width and height of the shelves must correspond to the dimensions of the stored items.
- Shelves are advisable to perforate to improve ventilation, as well as to avoid the accumulation of dust and dirt.
The arrangement of the garage premises should be thoroughly prepared. To do this, you will need:
When planning a shelving system, first of all, it is necessary to make an approximate list of objects stored in the garage, without forgetting to estimate their weight and dimensions. It is also necessary to draw a garage plan, on which the scale with an accuracy of a centimeter requires specifying the design parameters (height, width, thickness, step and number of shelves). After it remains thoroughly thinking the method of assembling and installing and fixing the shelves or a separate rack.
Please note: the choice of the type of shelf-racking system and the method of its installation and attachment largely depends on the properties of the materials from which the garage is made. So, if the walls of the last metal, with mounted shelves will have to be pretty tinned, while the easiest of the palter rack will save the garage owner from complex manipulations with fasteners, garage insulation etc. The most convenient option - plastered brick walls. In such a garage, you can give the will of fantasy and install a combined racking system with a multitude of functions beneficial in the farm.
Materials for creating a shelving system for the garage are selected based on reasons of convenience of assembly, as well as reliability and practicality in operation. So, for shelves intended for storing heavy and overall objects, a reinforced frame will be needed, for the creation of which the metal corner is best suitable or profiled tube.
But in this case, the owner of the garage cannot do without cutting skills, drilling and welding metal. In addition, the latter needs corrosion, and this is associated with additional financial costs.
In the role of a frame for garage shelves or racks, you can use wooden bars 40-50 cm thick. Working with a tree is much easier than with a metal, but take care of the protection of material from mold, rotting, humidity and other aggressive operating factors still have.
As for the material for the manufacture of the shelves directly, to the most practical solutions It is worth attributed:
The edged board is one of the cheapest and easy-to-referring materials. Shelves in the garage made from the boards will serve for many years. But to increase the ease of use and increase their life, they must be seized and be sure to cover the antiseptic and paint that will protect the material from mechanical damage, pests and rotting.
Plywood is a practical and inexpensive material with high strength and durability measured by decades. It is easy to work with this material, however, in the manufacture of shelves, it should be pasted with small emery and coat the protective layer of paint or varnish. This will prevent disconse, dryness and cracking of plywood under the influence of dampness, temperature drops and aggressive chemicals.
Chipboard is a cheap and convenient in work, but naughty in operation. When making shelves from chip plate Using varnishing or staining, it is necessary to protect against damage and aggressive exposure not only the working (upper) and lower plane, but also ends, as well as holes for bolted fastenings and perforation. At the same time, the latter require increased accuracy when performing due to the characteristics of the material structure.
Please note: a rapid, but rather expensive version of the garage arrangement is to purchase ready-made plastic or metal perforated shelves with factory fasteners or a prefabricated rack frame. In the absence of sufficient funds, the most reasonable solution will be independent manufacture Designs from materials prepared at the discretion of the garage owner.
First of all, it is necessary to determine the locations of the shelving system. If we are talking about several small shelves, you can perform a sketch directly on the wall, while the drawing of the frame rack will have to do on paper.
Sketch of mounted shelves on the wall of the garage
When planning a design, it should be considered:
Calculation of the Power Shelving System for Garage
If a rack is installed in the garage, it is advisable to choose its height in the height of the room. As for wall mounted or suspended shelves, It is convenient to perform their calculation from top to bottom. If the dimensions and garage layout allow, the width of the shelving tier is selected along the entire length of the wall with a 5-10 cm reserve for the convenience of mounting. The optimal depth of the rack is 50-60 cm, although for overall objects ( automotive tires and disks, spare parts, boxes, etc.) wider shelves will reasonably.
Closed outboard rack for garage
The height of the tier can be different and selected in accordance with the needs of the garage owner. Practically post the widest and deep shelves below. It is more convenient to store heavy and bulky items that, if necessary, to get it easily. On the other hand, deep shelves can be installed under the garage ceiling. After all, on upper tier It is very convenient to store overall, but light things or rarely used objects. In addition, individual tiers are conveniently divided into sections, which will make it easier for sorting stored.
Drawing of a simple shelving system for the garage
Please note: it is undesirable that the width of the shelves, especially from a thin material, exceeded 1-1.5 m. This will reduce the strength of the structure and the provision of tiers. As for the length, it is convenient to repel from the size of at least 60-80 cm, otherwise the shelves will be uncomfortable for storing long items. The vertical step of the stellage system is accepted at the required height of the storage. For example, the height of the lower tier can be taken 70 cm and take it under the storage of automotive tires, wheels, Big Tara and so on. If you add another tier 2 to 50 cm, then the total height of the rack will be 1.7 m. In the garage with a ceiling 2.5 m height, the upper shelf of such a design will have 60-cm step taking into account 20-cm distance from the floor to the lower tier .
For independent manufacture, assembly and installation of the shelving system, a considerable arsenal of instruments will be required, as well as auxiliary materials. The toolkit for performing the task is containing:
Please note: the welded steel frame is complicated in the manufacture, so bolted connections prefer welding.
The list of auxiliary materials should be made:
Please note: In some cases, wooden shelves are more convenient to fix on the frame with a special glue.
Independent design of shelves or rack for the garage farming is performed with a subsequent assembly. The work algorithm is as follows:
Homemade shelving system on a metal frame and shelves from chipboard
If it is not enough to install a separate rack of free space in the garage, the room is equipped with shelves. The latter can be:
Suspended shelves are rational to install in rooms, the walls of which are made of materials complex in processing or unable to carry additional loads. In this case, the shelf frame, which is manufactured, as a rule, from metal, will be attached to the ceiling. The latter should be strong enough to withstand the weight not only the entire design, but also stored on the shelves of things.
Please note: to reduce the burden on the ceiling, the frame frame is preferably equipped with wall mounts.
Manufacturing and mounting suspended shelves is performed in several stages:
Suspension shelf system with beam stripped on the walls of the garage
Please note: if the garage ceiling is made of concrete or other material of sufficient strength, you can refuse from the bearing beam. But in this case, it will bring the mount to the plane of the ceiling of each of the vertical racks of the frame.
Installation of a shelf frame on a concrete ceiling
Mounted shelves are manufactured in the following way:
Wooden mounted shelves made of wood mounted on a brick wall
Please note: for mounting a shelf frame on a wall or a garage ceiling, it is convenient to use special brackets that are sold in the store. The wooden base of the rack is additionally enhanced in nodes using metal corners or spacers.
If the garage is quite spacious, it can be used not only as a warehouse for spare parts, tools, building materials and all kinds of economic trap, but also in the role of a home workshop. To do this, add to the decomposition of adaptations, which repeatedly increase the convenience of performing various technical operations. To such devices can be attributed to:
Homemade workbench for work in the garage
The workbench is a very useful detail of the situation in the garage, which represents a table equipped with drawers, shelves, bedside tables and technical devices for performing various economic or repair work (visets, electrical outlet, local illumination, etc.).
Washing I. cooking panel in a car garage
Washing is a practical and useful solution that will ensure uninterrupted water supply in the garage required not only for hand washing, but also for car care, as well as measures related to room cleaning.
Garage looking Yama do it yourself
Looking pit is an extremely necessary device for a garage, in which the car will not only be stored, but also repaired.
Cellar (vegetable store) in the garage
With a lack of free space in the house, the garage can be equipped with a vegetable store, in which it is convenient to store vegetables, pickles or products that require a special temperature regime.
Cabinet built into the rack system in the garage
The cabinet embedded in the rack system in the garage will allow not only to accurately place various trifles, tools or spare parts, but also to restrict access to them.
Ventilation and heating in the garage are needed if the room is used round year, and not only for storing cars, but also to perform repair and household work.
Please note: the arrangement of the garage premises is entirely depends on the needs and financial capabilities of its owner. At the same time, virtually any of the necessary devices for car care or housekeeping can be either purchased at a finished form, or make and install with their own hands, significantly reducing cash spending.
Universal Storage Wall tool, Auto Parts and Economic Inventory in the Garage Stellar Wood System for Garage Conduction Arrangement 
Storage of power tools in the garage on a special shelf
Many useful ideas are born directly in the process of arranging the garage. For example, the racking system can be made collapsible, equip some of the tiers on sides or sections for storing various trifles. It is noteworthy that immediately plan all that may be needed in the car's care and solving economic tasks in the garage room, it is very difficult. Therefore, it is necessary to start with the most necessary, for example, from shelves or rack, workbench or cabinet, which will optimize the space in the room and make it easy to make everyday work on car care and household.
At the country site, the owner is given the opportunity to experiment in terms of landscape design, Implement ideas offered by different folk craftsmen. Especially can give the will of fantasy those gardeners and amateur gardeners who love to visit hotels in Lazarevsky, who have the desire to rationally use each meter of the square. Interesting homemade For cottages begin with the arrangement of the beds.
Rarely some of the present owners do not dream optimally use on panstone Available free space. For this in the arsenal of the summer house non-standard solution called vertical beds.
Beds from pipes
The variant of beds from suspended on the wire, on chains drainage pipes Or on long sixtes. They will be comfortable mainly spicy herbs and decorative plants. When designing, you must consider two points. First, the length should be so that the beds do not clutter the territory and did not interfere with the movement of the hosts. Secondly, the place where the design is installed, with the minimum intensity of the winds to avoid destruction.
Stages of creating beds from pipes:
Pipe containers are not necessarily suspended by the method proposed above. They can be simply installed on the crossbars of a wooden P-shaped structure.
Groats from polyethylene
The polyethylene film itself is not particularly durable. Therefore, the optimal thickness of polyethylene is considered to be a value of at least 0.2 mm.
Manufacturing process:
Such beds are not only easy to perform, but not expensive.
Car tire track
This is very economical option The tracks that can be decomposed on the garden or in the garden. Such interesting I. useful homemade Can make even a woman. It will take very little time for its manufacture.
A sharp and powerful knife or saw cut the side parts of the tire.
The resulting ring is cut, dissolve and fastened to the ground.
Color the corrugated surface, after which you can evenly sprinkle with fine stone crumbs.
Bottle Cap Walkings
The tracks laid out simple and practically free material look original.
Plastic covers can be painted in different colors.
Creature concrete base: Along the dumped shallow trench, to build a formwork, pour a layer of rubble and tamper. Pour into the formwork solution (water, sand, cement and glue).
Without waiting for concrete, it will freeze, press it in it.
Almost every farming there will be plastic canisters from any liquids. Of these, different useful things are obtained, tools. Interesting homemade for the garage will help to organize space, and bring order.
Shelf from canister
In addition to the five-liter plastic canister, you will need a thin board or plywood.
Rack from Canister
For the proposed shelving design, you will need 40 plastic canisters.
From the canister you can also make retractable hubled. In this case, the holes are cut in the side part. To knock down the rows of the row of the shelves so that it is close to the shuflka canisters. Canisters must be deployed with handles out.
Cabinet for storing saws from circular saw
The feature of such a cabinet is that each retractable shelf has a very low height, since the shelf is designed only for storing one circle. These are very useful and interesting homemakes. Technical tools and accessories to them will be convenient to store every man.
The manufacturing process is reduced to the following steps:
To do wooden frame rectangular shape.
On the side vertical sides to build the grooves for the shelves.
From plywood, chipboard or wood make a retractable shelf so that they come close to the grooves.
To the front of each shelf to attach restrictive planks. When all the shelves are inclined, then there should be small gaps between adjacent straps.
Open cabinet for storing drills
Different nozzles for power tools (cutters, drills, bits, etc.) will be neatly sorted, each can be quickly found if necessary.
Open cabinet is wooden shield. At some distance from each other, horizontal wooden bars with vertical non-separation (top) holes in which nozzles will be inserted.
Holder for screwdrivers
By analogy to the previous design, you can make a screwdriver holder with your own hands. The difference is that for the manufacture of horizontal holders shelves, it is necessary to use plywood strips in which drill through holes or to make feeds, the dimensions of which must respond cross-sections Screwdrivers
Interesting homemakes with their own hands can be easily made of girlfriend. It will save your money and will create extraordinary things.
You can find a variety of things made by skillful people from girlfriend. For example, a very interesting idea is a canister, converted to the bar locker. It looks impressive and stands the same. At the same time, such a thing can be done by himself, so that it satisfies it is your requests and needs. In the bars, the door, as a rule, opens down, which may not always be comfortable.
Below is the instruction, how to make your own cabinet made of canisters with shelves adjustable in height. The layout of the shelves depends on the goals for which the locker is intended, for example, the combination below is suitable for photographic equipment, but you can adjust it to your needs.
