After a hard work day on Earth, I sometimes want to clean my body from dirt and refreshing in warm water.
If nearby is suitable for bathing with water, it is good. And if not, the time to think about the device of the summer soul in the country area.
There are two types of this facility:
A shower cabin with a tank can be purchased in the store. Its value varies from 5,000 to 18,000 thousand rubles depending on the materials.
Such a soul will last much longer and water in it will heat up faster and keeps the heat of interest. For the shower construction, the square of the square shape is suitable. It is more stable, spacious.
In addition, this form accelerates water heating. The tank size depends on the number of people who will enjoy them during the day. But remember, the greater the tank, the slower the water heats up in it.
Now consider the stages of the preparation and construction of the summer soul with heating water.
It all starts with the choice of a place where the shower will be. It must be protected from wind and the most accessible to the sunshine.
The first condition is necessary to prevent the possibility of catching out due to draft after the taking of the soul.
Second - so that water warming is more efficient. Even if you design a shower with artificial heating, natural will help reduce energy consumption. And an important factor - the shower is better to set close from a reservoir or water intake crane.
Deciding with the place, it's time to think about the size of the structure. The standard is considered a soul of square shape with walls of one and a half meters long and a little more than two meters in height. But if there are full or very soul among potential users high peopleIn the design of the cabin it is necessary to take into account.
An important factor - what materials will be used in the construction. You can use a frame of wooden bars. It is environmentally friendly, but not very durable.
Therefore, the soul frame is preferred from a metal, and everything else is from a tree. In this case, you should prepare the kits tool for work and with metal, and with wood.
The last moment to be thought out before starting construction, is a draining device. There are several options. The simplest thing is that water goes into the soil under the booth.
It is not quite convenient because you have to leave the gaps between the boards in the floor, and this in turn will lead to drafts in the shower. A more common option - draining water in specially dug cesspool pit or septic tank.
To do this, the pallet is installed on the floor of the shower cabin. It is specifically set with a bias so that the water used is not stored and did not require additional efforts to clean up after taking the shower, and the pipe or the hose is drilled below, the other end of which is sent to the pit.
Construction begins with the installation of vertical racks. If the soil is in the area of \u200b\u200byour cottage plot It does not differ reliability, then it makes sense to build under each standing foundation.
The frame of the three walls can be strengthened with the help of transverse beams. So you can be sure that the design will not fall apart in a couple of years under the weight of the tank or something else. And on top you need to equip a platform for water tank.
The covering is performed by the already prepared material in two layers (external and internal), between which, at will, the insulation is placed.
This additional layer is necessary if you plan to use a shower in spring or autumn, when the weather is not warm enough. After completing this part of the work, the door is hung.
The conclusion is to install the tank. First, the heating element (TEN) is installed inside the metal brackets, and so that it does not touch the walls. Then the hose is supplied to the Baku, equipped with a water intake crane, and an electrical cable is connected to the tane.
All this now should be installed on the cooked area on the roof and secure metal cables. From above you can construct the semblance of a greenhouse: pull the film (preferably dark color) On wooden bars.
So heat will be attracted and at the same time not to go out. At the final stage, it is worth checking the tightness of the system again, if necessary, use rubber gaskets or silicone seals.
With a limited time or means, you can arrange an extensive version of the soul. It is arranged near the wall of the country house, to which the water and shower capacitance is attached. The walls of the shower are replaced in this case with curtains from tarpaulin or cellophane attached to an easy wooden frame.
The cottage always combines a place and work, and rest. Therefore, make sure that the working conditions are comfortable, and the resting place is pleasant. And the summer heated shower will help you with it.
Dacha is a dream of almost any resident of the metropolis. Many citizens with pleasure are spent on the cottage part of their holidays and weekends. They are in the joy of work along the garden, the garden, the arrangement of the dacha: so they are distracted from the noisy urban fuss. Well, if the site is located near rivers, water bodies. The rest has to build your own summer shower cabin on the site, equipping it with heating and changing room. How to do it with your own hands, we will talk in this material.
Country souls Heated and dressing room is not so difficult to build. But how cool to swim after the working day in a comfortable environment. It is worth spending some time and strength, and for your own convenience. At the same time, it is absolutely not necessary to spend a large amount of funds for the construction and equipment of the structure.
For the summer soul you can choose practical and not the most expensive materials. First, it will surely need cement mortar. More massive structures are better installed on the bay foundation, for light models you can choose a pile option.
When choosing materials, it is necessary to be guided and features of work. For a small pit for filling the foundation, there is enough shovels available in every home. For pile designs, narrow, but deep holes that are digging with special electrical or pneumatic tools are required.
Choosing suitable material, take into account not only its value, but also characteristics and requirements for the preparation and care (impregnation with protective equipment, the need for timely ventilation, etc.).
Brick builder
Plastic shower
All sheet materials are used as a framework of a frame. The frame itself can be made of wooden bars, metal pipes or profile. Special attention deserves the upper flooring, on which the water capacity will be placed. It must reliably rely on the vertical parts of the frame and have sufficient strength in order to withstand the weight to the edge of the filled tank.
Tank, that is, the water capacity is chosen on the basis of how many people will use the shower. If few people come to the cottage, then there is no need for a large tank. The compact container is easily mounted, slightly weighs, so water heats up faster. For washing 1-2 people, this is quite enough.
There are several types of tanks for cottages, depending on the material of their manufacture:
Carbon steel tank
To equip the shower with heating in two ways:
For the cottage, which is visited mainly in hot time, is suitable for a natural heating. To increase the efficiency of the influence of the sun on the tank with water, choose the black container.
Artificial heating is engaged in such a device as a TEN. This fixture is sold separately, so they can equip the shower on their own. At the same time, it is possible to purchase a ready-made capacity with the already mounted by Tan. The advantage of it in the quality of the installation, as well as in the ability to purchase a tank with a thermostat.
Tank with pen
You yourself install, to which temperature water will warm up. Crepe on the roof two tanks, one of which will be with a nonsense, and the second without a heating device. Thus, mixing water, you can use your wooden or polycarbonate shower at any time of the year.
To begin with, you should choose a place where the shower will be installed. It is best to put it on the edge of the site in a well-lit place on a slight elevation. The optimal is considered height of 2-3 meters.
Street construction drawing
The space that will occupy the cabin itself should be at least 100x100 cm. Together with the changing room, its standard sizes can be 160x100 cm or a little more.
Deciding with the place, you can proceed to the development of the project. Despite the simplicity of the design, it is better to first shift its idea on paper. It is easier to determine the "narrow" places and calculate the number of necessary materials.
The construction process of the summer soul on the street begins with the preparation of carcass details. It is better to build it from a pine board. You will need:
It is also necessary to prepare the following details for the construction of the soul:
Construction must be started with the installation of support pillars. Then the frame is made separately and attached to support. It is recommended to use long bolts as a frame of a frame, since the design must withstand the load from the filled tank with water.
The floor can be made from the boards, to fit them to each other is not very tight so that water leaves the cabin through the gaps. But minus such an option is that cold air will flow from under the sex. It is better to use a finished shower tray. The hose through which the water will be discharged to the designed place for the drain (water supply).
Bookmark Fundament
Street shower can be separated: one part is allocated for the locker room and tanned the polyethylene curtain, and the second to make the shower directly. The second option is to establish a partition from moisture-resistant plywood or polycarbonate between these rooms.
The door from the locker room in the shower is not necessarily installing - it is enough to hang the slot from the waterproof material. However, if you have installed a wooden floor, it is better to build a high threshold between shower and changing room.
The outer door should close tightly. However, a well-fitted door can wake up from moisture, and then it is broken. That this does not happen, there is a gap between the door frame and the door, which will overlap the seal attached by contour door canvas or frame.
The frame can be seen by polycarbonate. Shower cabin will be fairly light. You can also sew walls siding or hammering with clapboard, but then artificial lighting will have to arrange.
To connect the tanks to the mains, it is better to call an electrician who will select the desired cross section of the wire and will do everything you need to provide safe operation instrument. In fair man for this part of the work is better not to take.
Submission of electricity
As you can see, the construction of a summer soul with a locker room and heated is not such a difficult task, if there is a desire and the ability to make such a shower with your own hands. For this you need:
An example of creating a warm shower for giving Look at the video
Use such a shower is easy and convenient. They can be used in the offseason, and with a great desire - both in winter, just need to be inspired. All in your hands.
Country house For many, the favorite place where you can relax from the city bustle. But here, away from civilization, people are not accustomed to abandon the benefits that this civilization gives. And one of them is the opportunity to pour into hot noon under cool shower. therefore summer shower refers to the economic structures necessary for a comfortable time on country plot. Especially since it is relevant if there is no natural reservoir nearby. To feel like a person and in the country, it is necessary to build a good construction that can serve not one season. You have already thought about how to build summer shower? PHOTO You will clearly demonstrate the main stages of the process.Start incarnate your idea with careful design. As they say, death seven times, but only one - a revenue. To start review ready projects Summer soul and based on them. It takes a place to be reserved under the shower, the availability of building materials and the desired dimensions. Here it is necessary to take into account the volumes of the owners themselves.
Even newcomer can easily compile a draft shower independently. A simple drawing or a small drawing will help calculate the number of building materials, avoid some errors and unnecessary costs.
Summer shower Must be spacious and comfortable. It is necessary to provide a place for clothes and bath accessories - at least 40-60 cm. The height of the soul should be about 2.50 m. The size of the indoor room, which are found most often - 160x100 mm and 190x140 mm. All this must be taken into account when drawing up a drawing or project.
Tips for the preparation of the site ...
Now it is necessary to determine the location of the summer soul. Naturally, it is better to build it in a well-lit sunnywhere, away from other buildings. Then the water in the tank will be heated from solar heat throughout the day. But if planned to build a summer heated shower, then it is not necessary to adhere to this condition.
The distance from the house should not be too big so that you can quickly go after water procedures to the room. It will be reasonable to take care of the flow of water in advance. It is better to get it in septic or sump. It is worth paying attention to the convenience of water supply and, if possible, ensure automatic tank filling. After the selection of space, it is necessary to prepare the platform: remove the top layer, align the base under the shower and fall asleep with the sand area.
We build a frame ...
Summer shower may be overhaul, and maybe easy frame construction. Therefore, the main stages of the construction of such souls differ.
The foundation is a reliable basis for the shower cabin, but sometimes he is at all
In order for the base under the shower to be correct and it is necessary to make elementary marking for convenience: for this, pegs are clogged along the outer corners of the site. After that, it is necessary to check the diagonal and pull the cord.
The size of the foundation depend on the materials that will be used when the soul is erected. For the structure of brick or slag block poured the foundation of a depth of 30 cm. If metallic or wooden frame For the summer soul, the foundation will be somewhat different. Before the fill, it is necessary to prepare a place for pipes - lay a log or branch of the desired diameter, wrapped in rubberoid.
If you use summer shower the family plans not one year, it is better to make a formwork - to increase the level of the foundation over the ground by 10-15 cm, increasing the height of the trench at the expense of boards fortified by spicy and struts.
When pouring the base under the shower concrete is extremely important to provide a flat surface. Do it the same as when the floor is tie, using the level and two guides. Guides are exhibited by level, poured with concrete, align the floor on the guides. Only the horizontal surface can serve as a reliable basis for a further structure. After the alignment is made, proceed to the masonry of the brick.
Installing the soul with the use of a frame
You can use as the soul base metal carcass (He is more durable). The construction of the summer soul will be much more economical if used wood. But this material is not durable. Given the peculiarities of our climate and increased humidity due to the operation of the structure, it is better to process it with biopropite to protect against insects and fungus.
Deciding with the number of building materials And the size of the construction, proceed to the mounting of the frame. The first stage is marking. On the ground, the rectangle is denoted, the parties of which will correspond to the parameters of the future design. In order for the design of the summer soul to be stable, it is necessary to make a pile foundation. Therefore, in the corners of the markup of the pits necessary depth (130-170 cm, depth depends on the length of the pipes). Then they make directly the installation of the foundation from pipes. Use for this better metallic pipes with a length of 1.5 -2 m (diameter - 9-10 cm), but even railway sleepers can go to the move. In the land of piles deepen so that they are 20 cm with the limits of soil. Then the pipes are poured concrete. After it is frozen in the pipes, it is necessary to install wooden bars. The width of the frame used for the frame must be not more than 10 cm.
That's how we cover the frame of the PVC film and get an excellent building
The next installation step is a bandage: starting from the top, the entire design is bolted. If the calculation is made correctly and all sizes are observed correctly - the design will be reliable. It will give the opportunity to install water tank big size. Its volume should be calculated according to the formula: 40 l × 1 person and no more than 200 liters. Heavy capacity design may simply not withstand. It is desirable that the tank is flat and corresponded to the roof area, that is, rested in the bearing structures.
The bandage inside the frame will serve in the future lags of the floor shower. Now bodies connect the bars of the walls among themselves. It should be installed in the thickness of the wall, but not in the lining.
But the option is covered with plastic slate
Slate sheets, OSB boards, boards, plastic panels, and even PVC film can serve as walls for such a soul.
Summing up of communications ...
Build a summer shower with your own hands can be from building materialsremaining at the site after the construction of the cottage, but with summing up communications the situation is somewhat different. Here without financial investments can not do.
The metal tank for the soul will never come out of fashion, but now plastic options are still used
For fast recycling and good outflow wastewater, Summer shower must be installed on the hill. Poam walls should additionally strengthen in order to avoid squeezing. Note that the volume of the drain pit must certainly be at least 2 cubic meters. meters.
A common error of novice builders is the septic location near the wall of the shower cabin or under the shower itself. If the volume of water is large, then the septic tank can be poured. Over time, drainage works worse, appears nasty smell. With constant flooding, not only soil shrinkage is possible, but even the destruction of the foundation, which is extremely dangerous. Therefore, the scene of the summer shower must be removed a few meters from the structure.
The flow of water is equipped with a waterproof layer using a PVC film, rubberoid or hydrokhotloxole. Alternatively, make a concrete screed reinforced with a metal grid.
It is impossible to use clay as a waterproof layer. After some time, it will die and can pollute the drainage database.
Install the pallet
To equip the summer shower with your own hands and ensure that the wastewater is outflow for it will allow the pallet. It can be a purchased pallet, pallet from a stainless steel sheet or the cheapest option - wooden pallet. Instead of the pallet, the boards are laid, but not tight, but leaving the gaps for water. The grille from the boards is pre-spacened with a skin and treated with an antiseptic. For convenience, you can put a rubber rug for convenience.
The easiest pallet for the soul - from ordinary boards
Between the floor of the summer soul and the pallet need to be laid waterproofing. To do this, use runneroid. By installing the pallet, it is necessary to ensure that the slope is formed towards the drain for the unimpeded water drain. The pallet is screwed to the walls of self-drawing.
For more comfortable washing, so that you should not stand on metallic palletIt is advisable to put plastic lattices.
Facing the facing ...
Summer shower must harmoniously fit into the overall design of your yard. Any designer will say that for outdoor upholstery, it is better to use materials that complement the ensemble nearby buildings.
The lining of the summer soul is not only decorative in nature, it is necessary to protect the walls from the impact of weather phenomena. The surface of the walls can be placed and painted or stripped vinyl siding, it all depends on the fantasy of the owner, its financial capabilities and features of the structure. For example, the summer souls from polycarbonate on the frame and at all in the facing does not need.
Left - polycarbonate option; Right - a shower lined with a tree
A good option is to sew walls and ceiling with clapboard. If you visit the cottage, the family will only be in the warm season, then it is better to choose a PVC film, dense color (opaque) polyethylene or tarpaulin as a material for lining a summer shower. If the soul's cover is removable, it can be easily removed into the pantry for the winter period.
It is very convenient when the structure is divided into two zones: shower and changing room. To prevent water from entering the locker room, the floor of this zone should be made above several centimeters. A small decorative curtain of polyethylene will help protect the clothes from splashes.
If you need to use the shower and in more cold period Time, then the walls will have to insulate. For this use polystyrene foam. This material it is necessary to fill in the inner space of the frame. Next, the design is rich in the PVC film with a stapler and decorative rails. Already on top of the film produce an internal finish.
If you choose the materials to arrange the summer shower (photos and on the Internet, and in the catalogs there is plenty), try to pay attention not only to the aesthetic data, but also on practicality. Only moisture-resistant materials are suitable for finishing the inside of the shower cabin.
Modern summer souls in the form of an extension to the house - what is not an option?
For interior decoration You can use thin linoleum, plastic panels, oilcloth or wood. If you stop on the wood, do not forget the hot oil to cover each board separately, but only then begin to finishing work. When cladding inland walls Material is launched under the pallet side.
To improve the soil drainage next to the shower, several moisture-loving plants can be attached. Green plantings absorb water. They will not only decorate, but also protect the space around the shower cabin from the fear.
Thus, the summer souls made by their own hands will become an indispensable horozoic on panstone.
The owners of country sites are trying to bring water to the house and equip elementary amenities. You can build a summer shower in the country with your own hands, both temporary and capital - the type of future structure is selected depending on individual needs.
In order to provide a quick water drain, the shower is optimally installed on a flat or slightly sublime platform. Do not choose a plot located in a strong lowline or in the pit.
To avoid water stagnation, choose the right place to build a summer soul
Optimal for summer soul will outdoor field, well illuminated by the sun, which is located in some remoteness from other buildings. In this case, the barrel will be naturally heated under the sun, providing the flow of warm water. This condition can be neglected only if the construction of the shower room with heating water is planned.
At the same time, the site where construction will be conducted should not be too far from the house - after water procedures, it is desirable to get from the shower to the warm room as soon as possible.
During the construction of the summer soul, the following parameters are used standard:
An example of a summer soul drawing
The specified dimensions are very convenient to the fact that, taking into account the thickness of the walls, the construction will eventually be released with an area of \u200b\u200b200x150 cm - this is a fully income option when using boards standard sizes. As a result, 100x100 cm will be allocated under the shower cabin, and 600x400 cm under the dressing room.
The following tools will be needed:
In addition, you need to stock up the nails and the Motka of the Beach. Separately, you need to buy a tank, as well as pipes, a couple of cranes and a divider for the shower. As a building materials for building a cabin, brick, iron or plastic sheets, wooden boards, for the construction of a frame - pipes.
Tools required for building a soul in the country
For the foundation and construction of brickwork, a certain amount of cement, sand and concrete will be required, and for the final finishes - insulating materials, paint, plaster, hooks under the clothes, shelves for bathroom facilities and other accessories.
The easiest option for the cottage is a compact portable shower that is suitable for one-time visa of water procedures, has a standard volume of 20 liters and is designed for water supply for 10 minutes. The principle of operation comes down to filling the water tank and the subsequent heating in the sun, after which the portable shower is attached to a height of 2 meters and is ready for operation.
Portable shower
A simple design also has an open shower, the installation process of which is reduced to the following actions:
A common option for the country area is the so-called domestic with a shower, the design of which involves the presence of a solid modular container or a frame-collapsible block.
Stationary summer soul options for giving
Installation of this design is quite simple - the area marking is made, the upper ball of the soil is removed and smoothed, the pillow of sand with gravel, on top of which boards are stacked. At the soil prepared in this way, the block assembled at the spot or the finished design is established.
Of course, the most common will be stationary souls, but for its construction it will take more effort and time.
The frame structure is erected much easier than the capital construction - depending on the type of construction type, the stages of preparation of the construction site will differ.
For a temporary design, it is enough to simply remove the top layer of the soil from the site 10-15 cm to align it and then fall asleep with sand.
For the cottage capital soul, the foundation is required, the depth of which is determined by the materials that are used for its construction. For example, for a brick soul there will be quite enough foundation, the depth of which will reach 30 cm.
Foundation for the construction of a capital summer soul
The foundation is laid in the following sequence:
Tip! Extend the period of operation of the soul will allow the formwork equipment - the level of all foundation is recommended to increase by 10 cm, lifting it over the ground using boards, strengthened stakes and struts.
The volume of the pits is usually more than 2 cube. m, while its walls must be strengthened in order to avoid possible scree. The plums are located a few meters from the shower, but not under the structure itself and not at its walls - this in the future will lead to the destruction of the foundation, as well as to the emergence of unwanted smells.
Example of drain pit equipment for summer soul
The stock must be laid with a waterproof layer - Ruberoid, hydrohoteloisol, PVC film is used or concrete screed (reinforced with a metal grid).
Attention! A widespread error is the use of clay as an insulating material that is blurred and soon clogs the drainage database.
If for capital constructions A brickwork is performed, a frame is usually installed for the temporary: metal or wooden. In the latter case, the tree should be treated with special impregnations that protect it from insects and moisture, preventing the formation of fungus and mold.
Wooden frame for summer soul
As a tank for the summer soul, a plastic container is suitable, which can be purchased in a specialized store, or another existing barrel. It is desirable that it is flat and commensurate area of \u200b\u200bstructure so that the weight is evenly distributed on carrying construction. Its volume is selected at the rate of 40 liters per family member, but at the same time the barrel should not be too heavy - its extreme volume is no more than 200 liters!
Tank for heating water from the sun
Tip! In order for the owner of the cottage to do not occur every time on its own to wear water into the tank, you can equip it with automatic filling.
By independently making wiring, it is important to follow all the rules of the electrical installation and adhere to safety. Separately because of high humidity You should take care of the insulation of the wiring.
Summer Ventilation Window
Internal shower finish must be performed from moisture-resistant materials: plastic panels, Linoleum segments, oilcloths, etc. If wood is used, each separately taken board is covered with hot oil.
The concrete floor is usually covered with plastic lattices or wood, rubber mats are spilled on top. It is fairly convenient to equip directly into the shower small locker room. In order for it to do not fall into it, the floors in it climb a couple of centimeters slightly - it is easy to achieve, additionally putting the pallet.
Summer Soul Interior
Concerning outdoor decoration, I will harmoniously look at similar materials that are already used for registration. country house And other buildings available on site.
To use the soul not only in summer periodBut at the colder time of the year, it is recommended to be insulated with the help of polystyrene foam, which is stacked in the inner space and on top of the PVC film. Walls usually face either plastering, weed with clapboard or siding.
If it is not possible to spend hot water in a private house or in country houseIn this case, it will be advisable to build a summer shower.
To build a wooden shower in the country, you can adhere to the following instructions:
First you need to pick up appropriate place For the construction of the facility. When choosing, it should be taken into account that such a country shower will be constantly exposed to moisture both inside and outside.
Tip: Such a building is better to erect on a well-ventilated area. This is necessary so that the wood faster dried. Also, it is not worth the shower to plant bushes, trees and high plants, as they delay moisture, do not circulate air, and as a result, they interfere with the drying of the wood, from which the country shower is made.
Production earthworks. For a soul, a hole with a hole of 1x1 m, a depth of 40 cm. On the bottom of the bottom, they lay a layer of rubble, which will help soap water to get absorbed into the soil. Next, in the corners you should lay out slag blocks. They are necessarily exhibited by level.
Next, proceed by K. making framework. To do this, take the board, the thickness of which is 30 mm, and the width is 15 cm. Of these, the base of 1x1 m will be made. It is attached to this base with a cross section 70x100 mm. For the carcass dressing, side and two transverse jumpers are used, which are inserted into the grooves. They also perform the role of amplification for the roof to which the tank will be installed on a hundred liters.
Works by saving framework. For these purposes, it is possible to use lining, block mobile phone or a false-timber. The gaps between the grooves should be two or three millimeters. This is necessary so that the timber can be freely expanding with regular wetting. In our case, a material simulating the logs was used to cover the soul.
shower for giving with their own hands step-by-step instruction. Photo
Finishing work. Before making a color, it is necessary to perform primer wood. For these purposes, a bioprotective antifungal impregnation is suitable, after which the surface is drying up with a facade acrylic water-fastened varnish at least 3 layers.
The next stage of construction of the soul in the country is installing a tank For water.
construction of a soul in the country. Photo
Tip: For the summer soul, it is desirable to use the tank, the minimum volume of which is a hundred liters.
You can build such a wooden shower in the country with your own hands in one or two days.
building a shower in the country with their own hands. Video
For the construction, it is necessary to prepare the following materials:
How to build a summer shower at your own hands?
Procedure for the construction of the structure:
Compilation drawings. For such a structure, it will be necessary to make a wooden pallet in the form of a circle of dense wood. As a template, we will have a cardboard of the desired size. First you need to put cardboard on a flat surface and fix it with a scotch. Next, with the help of measuring devices, draw a circle with two squares located inside. There will be a wooden floor on this template and will be built.
summer shower with their own hands drawings
Design pallet. Paul we will have three-layer. The procedure for the floor for the floor is as follows:
Works by installation pipe. Connect all the items that are in the shower set.
summer shower with their own hands a step-by-step instruction. Video
summer shower with their own hands a step-by-step instruction. Video instruction
This option attracts its low cost, the stability of materials to the action of sunlight and moisture, as well as ease of processing.
The procedure for the construction of the foundation and gender
Before starting to build a summer soul of polycarbonate, it is necessary to determine its location. For such a structure, an invisible place is suitable smooth surface, away from wells and wells.
Preparation of the site. To do this, we dump it with sand and tamper.
To drill or dig up four pits in which the foundations for the foundation will be inserted.
On the bottom of the pit lay a layer rubble 10-12 cm thick.
Install pipe From plastic used for sewage laying. We produce their fill inside and outside.
summer shower with their own hands a step-by-step instruction. Photo
In the central part it is necessary to dig drainage pit and fill it with rubble.
The platform around the scene also fall asleep rubble.
From the bar with a cross section of 100x150 mm do basefor the construction and fastening it to the foundation columns. For these purposes, it is necessary to drill holes in cement and insert corks in them.
It is also necessary to fasten the jumper by screws and enhance the design with steel corners. Between the pipe and the bar fit waterproofing.
Tip: Before mounting the jumpers, you need to try on the pallet, as it will later be installed between them. Therefore, if necessary, it will be necessary to fit the framework for the size of the pallet.
Next, it is necessary to remove the height of the floor from the bar 50x50 all over the perimeter and then you can proceed to the device. outdoor coating . As a result, the foundation with the built-in pallet should be found.
Procedure for the construction of walls and roofs
Getting Started wooden Rama soul. At this stage, it is necessary to provide for the doorway. In our case, the height of the wall will be 2.5 meters.
summer shower from polycarbonate Step-by-step instructions. Photo
To the rafters is attached solid Okeekhet.
We do a layer waterproofing from toly or bicrost.
We produce lateral sides sew Processed board.
For coating roofing Use soft tile.
After that we process the entire wooden frame morilkain two layers, and then varnish in two or three layers. On such a structure, as a summer souls from Polcarbonate will need about 7.5 liters of verses.
Facing the carcass Polycarbonate From the outside. For these purposes, it is recommended to apply a special thermoshaba, for which with the help of a milling cutter on polycarbonate, it is necessary to cut holes.
a door Made in the form of a wooden frame. Its height is two meters. For giving stiffness, jumpers and drives are used. Next, the door frame is painted, hang on the loop and stones with polycarbonate.
After that hang water heating Ba.k, mixers, curtains, hooks, rugs and other accessories.
At the bottom of the pallet, it is necessary to remove the drain in drainage pipe inserted at 20-30 cm in the rubble base.
At the final stage we produce landscaping in the entrance In the country's souls. To do this, we break the pit, the bays of the concrete foundation and put the reinforcement into it. After the concrete gains strength, put bricks on it, which will be installed in the wood. If you wish, you can make a decor. To do this, you will need cement and stones.
Attach steps.
The first thing to be done before starting construction is to decide on location Summer soul. For such a structure, a well-lit, calm, a little sublimated place is suitable.
Tip: It is desirable that the shower is not located too close to the buildings and was built in the same style with them.
Stages of building a soul in the country
Compilation project. It is planned to build a shower consisting of two small premises. The minimum size of the bathing compartment should be 100x100 cm, changing rooms - 60x100 cm. In our case, the optimal soul size is 200х150 cm.
On the selected platform location rectangle sizes 140x190 cm. In the corners we drive pipes. The foundation for the soul will be pile of two-meter asbestos-cement pipes, the diameter of which is 90-100 mm. They must be bursting into dumping pits to a depth of 1.5 m. Above the surface of the Earth should remain 20-30 cm. After that, the drainage and drain system are arranged.
Draft summer soul. Photo
To organize water flow dustproof layer. It can be made of a polyvinyl chloride film or rubberoid, which must be laid on the inclined surface. Alternatively, you can perform an iron-concrete tie.
Top and lower vent. Frame.
Floor coating device from boards.
Tip: In order for the water to flow out of the shower cabin, the floorboards are recommended to be installed with gaps whose width is 10 mm.
The shower room should be divided from the room for changing the high booster and shutter.
Finishing work. Outside, the country's souls are trimmed with clapboard or siding, moisture-resistant plywood, fiberboard, etc. Inside for finishing, materials that are not afraid of moisture should also be applied.
It is necessary to install a water tank on the roof, the water heater is installed indoors.
Procedure for the construction of the structure:
After the appropriate place is selected for the construction of the soul, you can proceed to earthworks: dig boiler, fall asleep it with PGS and lay out point brick foundation.
After the foundation is ready, you can proceed to the device wooden carcass Designs. For these purposes, a timber is used.
For sheathing The soul on the sides and behind this project was used a bottle of 10 mm thick. Front should be provided with window and doorway.
Device frame Roof of wooden bar. This project should provide window openings on the folding roof.
Corners should be bred by boards.
To cover the roof can be used bituminous tile.
The door is made of boards. Handles for doors and steps can also be chopped out of wood.
All wooden elements need paintpaint or varnish.
Device benches, installation shower pallet, walls of wall plastic, hooks fastening, etc.
Project number 1.
For the soul you can also use not only a wooden frame, but also metal. This design can be installed directly to the ground. A curtain is used as a door in this project.
Project number 2.
The shower can be made from a wavy metal sheet, which can be bent semicircle. For this option, there is no need to install a water heating tank. It will be enough to connect to the water supply.
Project number 3.
Such a summer shower of pipes is facing white plastic outside, and inside - brown. The shower cabin can be erected on the paved concrete site. For such an option you will need a water heating tank.
Project number 4.
In the quality of the floor in such a soul you can use wooden flooring. Indoors are lined with blue plastic. Instead of roof, a wooden grille is used.
Project number 5.
The basis of this soul is made of metal pipes. Brown straight out of the walls was used. The roof is also made of corrugated. The light in the shower room falls through the holes between the wall and the roof.
Project number 6.
For the manufacture of this shower, red polycarbonate was used. For such an option, there is no need to install a tank on the roof. To enjoy such a shower, you will need to connect it to the water supply.
Project number 7.
The frame of such a soul is made of metal pipes painted in blue. For lining of the walls, plastic white was used. For a tank, a metal design was made.
Example number 8.
Shower in rural style. The frame is made of dry tree trunks. For facing applied branches. On top of construction, logs are fixed on which the water tank is installed.
Project number 9.
The frame for such a soul is made of metal elements. Paul and wall cladding - lacquer-covered wood. In such a summer soul, the door and water tank is not provided.
