With a frequent use of the soul, the water is constantly sprawling and delivers a lot of inconvenience to its collection. Special design will help to get rid of the old curtains or similar devices for protection against moisture - Shower Shirma. Perfectly performing protective functions, it will simply decorate and distinguish the room.
Shower Shirma, as a rule, is sold along with the pallet - this kit is called "Shower Corner".
The choice of modern Shirm allows the user to effectively cope with problems. the appearance of water on the floor in the process of taking the soul. In addition, Shirma can significantly improve the design of the room. At the first stage of choice, it is necessary to proceed from the practicality of the selected product. Shirma should reliably prevent the spread of soap splashes and at the same time be comfortable in terms of cleaning.
POPs are offered frame, frameless and combined structures. When choosing, it is necessary to take into account their design features.
Shirma can be installed on pallet or on the floor. The product with a pallet can be equipped with a seat and more preferably for older people.
The frame design of the screen is made of aluminum profile and allows you to fix tempered glass or polycarbonate sheet in it. The framework of the frame can be one-frame or gain from several frames. Good option With intensive splashing of water there will be a screen of a multiple sections.
The design consists of a side wall and two fixed sections located along the edges. Two moving sections serve sliding doors. The kit may consist of a combination of glass and polycarbonate. The glass enclosed in a reliable door frame will easily slide on the guide profile using special rollers.
The frameless option is suitable for washing people carefully using the shower. In this embodiment, there are no aluminum frame guides. The fencing for protection against water is performed using tempered glass (6-8 mm). Depending on the constructive features A variant with fixed and movable details made of thinner glass is possible.
If there is a single stationary canvase, you will have to take a shower directly in the stationary panel zone. Also manufacturers produce shirms with one sash, whose canvas is mounted using loops to the wall plane. When taking the shower, Shirma is easily closed.
A special two-dimensional shirma is served by the frameless option. The main sash of such a design is attached motionless to the wall. Movable cloth is attached to a fixed via special loops and can move up to 360 °. With full closing, a kind of shower booth is obtained.
As a rule, the last sizes are found on sale:
Advantages of Shirm different designs Create certain convenience for use. The panels organized specially do not allow moisture to fall on the floor, decor elements, mirrors and polished furniture.
Functionality and beauty Shirm do not save them from some drawbacks:
Each type of screen will need competent and reliable installation in a certain room. All stiffener carriers are made of aluminum profiles and securely attached to the walls. For independent installation Do not save. The use of powerful self-tapping screws, bolts and high-quality dowels will exclude unexpected problems with intensive operation.
This is especially true of the upper and lower metal guides. When choosing such structures, pay attention to the methods for fastening the upper and lower edges. The presence of stainless brackets equipped with special holders will ensure reliable fixation of heavy glass panels.
Sliding, opening and folding shirms create significant convenience when used. Each user must carefully analyze the preferred option. Polycarbonate or glass partitions will give a certain chic room. Transparent, toned, matte or patterned options will affect the price of the product.
The video about how to install a shower corner of the door of which opens inside due to lack of space:
A successful selection of likelled models should be associated not only with interior decoration. Shower Shirma is not a luxury subject, although the style will never hurt. With all the unpretentiousness of the structures, you should pay attention to the presence of special panels, which will greatly facilitate cleaning and push moisture.
In modern interiors, the soul cabin with the overall pallet is often replaced with structures with thin transparent or matte walls installed on the floor. The dish of the shower cabin without pallet may seem simple. But this is only at first glance.
In practice, the installation of compact design requires basic skills and a clear compliance with the rules of installation, do you agree with that?
Want to independently put a shower-cabin, but do not understand what materials and components are needed for this? Let's be together to deal with all the nuances of this process - our article provides detailed instructions On the construction of the shower without pallet.
Each stage of work is considered in detail, selected visual photosillustrating the described moments. And in addition to the article, we added videos, where the installation process of such a plumbing is clearly demonstrated.
Fashionable modern interiors Further distinguished by ergonomics, ease and availability of free space. For this reason, designers have developed compact and stylish shower structures without pallet.
Thin, more often, transparent cabin fences are mounted on the floor of the bathroom, where immediately, thanks to which the practical shower box is playing the role of a solid element of the interior.
Boxing for shower without pallet is used to organize a small bathroom and spacious room. Variety of models allows you to embody creative designer ideas In the interior design.
Since the walls of the cabin for the shower are usually made from the finest transparent plastic, the design looks in air and easy. An important dignity of the shower box without a pallet is the minimum space for its installation.
Shower without pallet not only successfully cope with its direct destination, but also stylishly transform the bathroom interior
As partitions of the shower, manufacturers more often use transparent or organic matte glass. After taking a shower on a glass surface, traces of water drops remain.
Gallery of images
In most houses in the bathrooms you can find a bath on which a spacer rod is installed. The curtain hangs on it, designed to protect the space of the room from splashes. Many are wondering if it is possible to get rid of this not quite a cluster interior object and what can it be replaced?
The answer is simple enough: there are currently special on sale barrifying shower shirms. Most often, the design of them is made of aluminum profile, on which tempered glass or sheet of polymer is mounted.
By installing the screen, you can achieve the following positive points:
By design Shower Shirma are divided into two types:
Consider each modification.
Frameless shower shirms are most often made of glass. They have a greater thickness to provide the necessary stiffness of the structure. The glass sheet in this case has a thickness of up to 8 mm.
Such screen is used usually in cases where strong water splashing is not assumed. The design is a screen similarity and cannot guarantee full protection against water in the gaps, which remain between the screen and the wall or on the side of the bath.
WITH SHIRMA It can be attached to the wall motionless, but more often it is equipped with a rotary mechanism that allows the sash to open to ensure easy access to the bath.
Among the advantages of such models, the simplicity of the design can be noted, which has a positive effect on reliability. In addition, due to the ease of execution, the frameless models are much cheaper.
Based on the name, so wide represent a framework, most often made of aluminum, in which glass or polycarbonate sheets are installed. The thickness of the panels is usually about 4 mm. The framework may contain both one and several frames.
It is these structures that are most interesting and are in great demand for buyers. They also have their own varieties and may vary by the way to open the door.
There are two main ways to open, according to which shirms are divided into:
Both design options are quite popular. To determine the choice, the nuances of each modification should be studied in more detail.
Swing design is easier, it is similar to the device of most hung doors. This is determined the main disadvantage of such models: Sash when opening take too much space. It is especially noticeable in bivalve models. However, if there is enough space, the swollen option can be quite comfortable and functional.
The swollen option is less demanding of accuracy in circulation, but if this moment is not fundamental, it is possible to make a choice between the swollen and sliding construction in accordance with its taste.
Moving the movable sash is carried out using a roller mechanism. Rollers move along a special guide. Magnetic clamps are designed to hold the moving cloth in the closed state.
Sliding design requires neat appeal. It is worth noting that both the rollers themselves and their attachments are a fairly responsible component of the entire mechanism. They must be made of durable material. Their device must be thought out to ensure the smooth movement of the movable sash.
You should pay attention to the installation requirements of sliding shirm. The mounting of aluminum profiles to the support surfaces should be performed using sufficiently powerful dowels and screws or self-tapping screws. If you use a dowel of small diameter and length, over time, the bearing elements can break out, which will break the smoothness and ease of movement of the sash or, in the worst case, will destroy the entire design.
Shower Shirm panels can be made from two different species Materials:
Each of them has its own characteristics.
Plastic structures have the following advantages:
However, there are obvious cons of this material:
Among the advantages of glass models, the following can be allocated:
Disadvantages can be called:
Glass can be performed with various decorative effects:
Based on experience, you can select some momentswhich should not be forgotten when choosing a shower screen:
Should separately say a few words regarding shower shirm with pallet. Shirma can be installed not only in the bathroom itself, but also in any other room. In this case, you can advise the acquisition of a structure with a pallet. Pallets are different overall dimensionsTherefore, you can choose the desired model in accordance with your own preferences or available. The depth of the pallets may vary, so there is always the opportunity to choose the optimal one. Depending on the premises and the preferences of the customer, you can pick up pallets of various forms:
On sale there are ready-made sets Shirm with pallets, among which you can choose the most liked.
Regardless of the selected model, the shower is not only becoming more convenient in operation, the interior also wins. Currently, the screen is no longer perceived as an element of luxury, but performs its utilitarian function, while remaining a stylish element of the bathroom.
When taking a shower, water sprinkles around the pallet, and condensate is collected on the items in the bathroom. To avoid such problems, screens or curtains are used, which prevent water from entering the floor, and surrounding items. This article describes what is the screen for the shower cabin, their advantages, and installation features.
Shirma is usually used with a combined bathroom, it creates comfort.
It is not necessary to protect the shower pallet with curtains, you can use a beautiful screen that will fit into the interior. Shirma for the shower of an angular or ordinary view is made of polymers that have a direct purpose, or glass. Such products are distinguished by sizes, material, and installation method.
The advantages of the screen lies in the fact that the floor, furniture, walls, and the ceiling are protected from excessive humidity. It is easier to carry out cleaning, also screen is also resistant to detergents, and easily installed in any room. Screens are divided into frame, and frameless species.
The frame shirma is made of a metal profile, to which polycarbonate in sheet form or glass material is attached. The product may include several separate sections or one solid frame. With a frequent use of the soul, it is better to install the product from several sections, the side elements are fixed, and in the middle, sliding design.
Still parts can be made of glass, and the middle is performed from a light material - polycarbonate, then the doors easily move away.
WITHOUT CARCA products have a more attractive look, since their elements do not consist of a frame or other metal parts. Such models are performed from a special glass of tempered species, it has high resistance to temperature change. But the cost of such fences will be higher compared to frameworks.
The most popular is the glass shirma bivalve species, while the glass has a thickness of about 8 millimeters. This indicator indicates about the high stability of the product to mechanical effects.
In combined structures, one part can be made of polycarbonate, and the rest of the surface is made of tempered glass. The weight of such a product is much less than a fully glass screen, as well as its cost is more affordable.
The most popular are glass shirms, they protect the shower or bathroom. Such products give the room lightness, and styles. Install such designs can be independently. The tempered glass is very durable, therefore it has high resistance to mechanical damage.
You can also use plastic products that are similar to the glass material, but after the expiration of time, and the transparency is disturbed by such a shirma. Therefore, when purchasing a plastic product, you need to choose a matte material.
The shower fence can be made from different glass, it happens matte or transparent, with the presence of a pattern, and without it. There are painted or sirful species Material, you can pick up such a product that is well suited to the interior in the room.
Standard screen sizes 100 per 100, 90, 90 or 80 per 80, you can order products for individual manufacture, if the usual parameters are not suitable.
Screens can have additional elements that create comfort, such are hooks or heated towel rails, shelves for soaps, Mirrors, various seating stands. When purchasing Screens, you can order an additional complete set, which will allow you to comfortably use the shower.
Installation of the screen can be made independently, the main rules of installation depend on the type of product.
Fastening loops are harder, they need to install special sealing elements from plastic or rubber, and there are tempered glass between them. Then in special recesses, made in advance, twist the bolts.
If the installation is done correctly, then the glass will retain its integrity on the loop mounting section. In the absence of a sealing element or a strong tightening of the bolt, the glass can crack. It must be remembered when the shower is installed.
When creating a cabin independently, there are many advantages.
Matte glass will be easier to wash, there are no divorces on it. If plastic is selected with glass imitation, then the time the transparent material may lose the original appearance, so it is necessary to choose a matte surface. The fencing of glass or plastic is easily cleaning with conventional detergents. Such screens prevent water from entering the surface of the floor, furniture or household appliances.
When choosing a shower screen, you need to know the exact dimensions, and the material from which the product is performed, and also take into account the presence of a complete set. If you plan to save money, then you can refuse from the additional configuration.
For proper installation Shirma with their own hands, the shower cabin will be distinguished by reliability, and comfort. If there is uncertainty in the right independent installation, it is better to resort to the help of specialists. Glass products have a beautiful appearance, they fit into almost any interior, carry ease, and ease, but their cost is higher than that of a plastic screen. Polycarbonate products are convenient, and quickly mounted, have a long service life, and they may have a glass imitation, their cost is accessible, it saves.
Such a difficult job, like installing a shower corner with a pallet, better entrust to specialists. The apparent simplicity of the process actually hides the mass of "underwater" stones. But if you are a master of all hands and have already been engaged in sanitary work, moreover, it is successful, you can try your strength and install a shower corner.
Immediately make a reservation that the arrangement of a shower corner without the use of the pallet and with it requires absolutely different tools, knowledge and approach to work. We will discuss only one option in order to understand it thoroughly, namely, how to install a shower corner with a pallet.
There are a number of simplest and, meanwhile, important rules for the success of this work:
Regardless of the manufacturer and the cost of a shower corner, all the joints after assembling the corner must be treated with silicone sealant.
Use for the assembly of a shower corner only a special sealant - moisture-resistant. It does not arise mold on it, it is well held on the glass and the profile, does not peel. As a rule, such characteristics are reflected in price, and among cheap sealants you will not find this. Masters praise sealants for aquariums. They are optimally held on glass surfaces.
Siphon and all connections for pipes are better to buy good qualitysince the pallet for a shower corner is low and repair work Supported connections are difficult.
To determine with great attention to the definition of the lower and top of the doors and glass walls. At first glance, they are very similar. But it is the error in the installation of glass parts (the top and bottom or the inner part of the outside) often the reason that the doors are closed enough tightly or make an unpleasant sound.
Tempered or, as it is also called, Kalenoe Glass, which is used to produce shower fences, curtains and doors, quite durable. From the impact of the palm and even a fist may not peel. But there is a nuance. It has points internal stress material. They are a bit. But enough sharp contact with something sharp in this point, and the glass will be covered with a million crack. Such glass, in particular, does not like strikes to the concrete floor. With such a blow, a glass leaf may not be broken immediately, but a microcrack is an invisible eye on it, which sooner or later destroys the surface. Moreover, it may happen after a few days or even weeks after installation, unexpectedly and without visible, as it seems causes. Therefore, caution should be taken.
However, it is better to see once than to hear a hundred times. Therefore, we offer you a step by step to go through the whole process of installation and learn how to assemble a shower corner with a low pallet. Of course, there are quite a few nuances in the design of shower fences for equipment of various shapes, size and different manufacturers - everyone does not take into account! However, there is general advicethat will be relevant to all.
As an example, we take one of the most popular Aquanet of the shower corners from the Alfa collection of a rectangular form of 150x80 (cm). However, the sequence of work is similar and for a shower corner a length of 140 or 120 cm, in the design of which includes one sliding door, having a free move and installed on the rollers.
Step 1. Prepare a siphon and a drain system.
Step 2. Fasten the leg on the pallet. Install the siphon on the pallet and connect the drainage system to sewage. With the help of adjustable legs, set the pallet in the level.
Step 3. Drop Slit Places with a wall Treat a sealant or close a plastic border to eliminate the water from entering the pallet.
IMPORTANT! In the process of assembling the corner before installing shower fences on mounted pallet Take a pause in your work and check the place of plum connection for tightness. To do this, you just need to pour a bit of water into the pallet and see if the connection is left dry, and did not have a puddle under the pallet. This problem is better to identify and solve immediately, and not after the entire shower corner is fully assembled.
Step 4. Check the availability of fixing fittings for the assembly of the shower corner.
Step 5.Take fixed glasses (solid, without holes) and install plastic seals in three sides that will be inserted into profiles. Next, put the locks, decorative plugs, install the glass.
Step 6. Connect the rack with the top plank. Please note that horizontal profiles have restrictive rollers, and vertical profiles are grooves for glass on one side, and on the other hand, the grooves for a used profile. Connect 1 horizontal and 1 vertical profiles of the letter "g", secure them with two screws in the end.
Step 7. Connect the lower guides.
Step 8. Connect the guide with a wall profile.
Step 9. Put the harvested glass fencing in the frame on the pallet.
Step 10. Temporarily set a wall profile on the glass, press the design to the wall, align it using the level and mark the installation site of the P-shaped vertical wall profile, and then attach them to the wall with the help of screws.
Step 11. Places of contact of profiles with a wall fill with a sealant, having apply it to a dry and clean surface. It is advisable to prevent the sealing places.
Step 12. Next, proceed to the assembly of the sliding door. To do this, install an eccentric type guide rollers on a sliding door. Do not forget to weaken the eccentrics on the rollers before installing. Note that two single rollers are installed on the bottom of the door. On the top of the door - two double rollers.
IMPORTANT! When installing doors, it is important to hook the rollers for all guides and adjust them correctly. Errors are very often allowed here, as a result of which the doors are pulled out, the gaps are formed, they move along the guides they are with an effort or hone. As a rule, in this case the case is not in low-quality components, but in a bad assembly. For proper assembly And adjust the door is moving smoothly and without jerks.
Step 13. Install door limiters, focusing on the pictures: top edge on the right (on the left picture), the door limiter in the leftmost lower part (picture on the right).
Step 14. Now you can inspire the door to the grooves.
Step 15. Fix the lower rollers on the guides before clicking.
Step 16.Adjust the door position with a screwdriver using the level.
Step 17. Insert the magnetic seal, as well as seals on the doors.
Step 18.Attach the handle to the door.
IMPORTANT!Spend the crash test by directing in turn on different sections of the collected shower corner of the jet of water to identify the lack of sealing in time, and not after the neighbors flooded. If we noticed the leakage, then repeat the sealing of the dubious site.
As soon as the sealant hardens, you can use the shower corner. Usually it requires a day.
