Typically, a cast iron bathtub is the most durable item in every apartment. But sometimes during the repair process it is also required to replace it. Some try to endure it entirely, although it is a very difficult matter, due to its enormous weight. Very often in our apartments there are such narrow passages that it is simply impossible to take out the bath because of its bulkiness. And after a little thought, you decide to break the bath and take it out piece by piece. Here the question arises: how to break cast iron bath? This article will tell you the answer.
Dismantle the cast iron bath begin with removing the fastening elements.
List of materials and tools:
Scheme of the structure of the bathroom on legs and brick
First you need to disconnect old bath from the fastening elements with which the bath was attached, and to dismantle the drain. If it is not possible to disconnect the drain, it is cut off with a grinder. You should also remove all objects that may interfere with dismantling the bath (both under and above the bath), and remove the mixer. To dismantle the bathtub, the edge of which is embedded in the wall, you need to dismantle the legs of the bathtub (starting with the distant ones) and, after that, pushing it from above, "drop" it to the floor. Before dismantling the old cast-iron bath in this way, it is required to put some kind of thick layer under it. soft material to soften the impact of the bath on the floor.
Breaking a cast iron bathtub will not be easy. This job requires a strong man and a sledgehammer. Before proceeding with the scrapping, it is necessary to clear the space around the bathtub, lay a soft cloth on the floor (to protect the floor), put the bathtub itself on its side so that it has free access from both sides. Breaking a cast-iron bath is a rather dangerous job: there is a high risk of injury from flying fragments of the bath. To protect yourself from these debris, you should wear heavy clothing, shoes, a hat, construction gloves, and a face shield. Soundproofing headphones can be worn to protect your ears from loud enough noise.
To minimize the risk of injury from fragments of the bathtub, remove household members from the room.
How to break a cast-iron bath without extra effort? The most weakness bath is located near the drain hole. To break it, one should inflict a series of blows from the inside in the bottom near the drain hole.
Cast iron bathtub, according to the craftsmen who renovation works professionally, is the most durable accessory. Nevertheless, there comes a time when it needs to be replaced. Many owners of old bathtubs try to delay this moment as long as possible, covering the product with new layers of enamel for this. Some approach this issue radically. This category prefers to completely remove the old bathtub from the house, and not install a new one in its place. It can be dismantled with or without preservation. Having tried to make this accessory whole, beginners are faced with difficulties and wonder whether it is possible to break a cast-iron bath. Or will you have to endure it whole? In this case, you have to hire a team or call someone for help.
How to break a cast iron bathtub in a bathroom? This question becomes very relevant for those who have decided not to use the old accessory anywhere else. It will not be difficult to cope with this task. You will find information on how to quickly break a cast iron bath in this article.
There are two ways to replace an old bathtub:
According to reviews, we can conclude that the procedure for breaking a bath with a sledgehammer is the most proven method of dismantling in practice. Nevertheless, it requires considerable physical effort. Not everyone can break a bathtub into several parts. The work must be performed by a physically fit person. In addition, the procedure itself should be performed during the day. Otherwise, a scandal with neighbors is inevitable.
Before proceeding with dismantling, you need to prepare the room in which the work will be carried out. It is advisable that there is nothing superfluous in the bathroom, namely various cabinets and nightstands. In order not to damage the toilet, if the bathroom is combined, it is better to remove it from the room as well. The floor should be covered with a rubber mat. Otherwise, the cast iron product laid on the tiled surface will slide.
Since the bathtub will first of all need to be disconnected from the pipes, the master needs to acquire the following:
In view of the fact that rough physical work will be carried out, the master should worry about the means of protection. Special gloves and goggles must be prepared.
Before you break the cast-iron bath, you must first disconnect it from all communications. The first step is to disconnect the overflow. According to experts, in many old houses they put cast iron pipes... Therefore, after many years they become very rusty, covered with scale, and the master may have difficulties with dismantling the cast-iron plumbing. The situation is better if the communications are represented by metal-plastic components. In this case, they are simply unscrewed. It is enough for the master to prepare only the pliers. It is not uncommon for the overflow grate to stick strongly.
Before breaking the cast-iron bath, you need to dismantle this element. Many craftsmen clamp it with pliers and scroll it counterclockwise. If it is not possible to dismantle the overflow in this way, it is cut off with a grinder. Judging by the reviews, often fasteners have a heavily rusted thread, which can only be dealt with after cutting it. First, several cuts are made on the grate, and then the overflow is knocked down with a chisel. Then the crosspiece is knocked out under the grill. As a result, the siphon should hang freely, connected to the rest of the sewer system. To remove it, the master needs to get rid of the coupling. Some newbies are wondering if a cast iron bath can be smashed with a sledgehammer. According to experts, it is quite possible to do this. It is only necessary to adhere to a clear sequence of actions.
For anyone who has never done anything like this before and does not know how to break a cast-iron bath with a sledgehammer, experts recommend finding its most vulnerable place in this sanitary ware. Judging by numerous reviews, it is located in the bottom, namely near the drain hole. It is there that you should hit with a sledgehammer.
After finding its most vulnerable point in the product, the following steps have to be performed:
At the very end, the cast-iron bath must be completely turned over. The bottom of the sanitary ware should point up. At this stage, the sides are processed with a sledgehammer. As a result, the bath is divided into several pieces, which will then be convenient to take out. In addition, the tub can be divided into smaller pieces. To do this, you will have to work with a grinder. The flame cutting method is considered to be quite effective.
For those who do not know how to break a cast iron bath, professionals recommend adhering to safety precautions. Most of this work is done by two people. Since a grinder and a sledgehammer are involved in the procedure, you can protect yourself from injury if all actions are coordinated.
Due to the fact that from strong blows of the sledgehammer, particles of chipped cast iron can get into the face, the sanitary ware should first be covered with burlap. This will also protect the bathroom itself. Dismantling speed and safety directly depend on the correct organization of work.
Before making repairs in the bathroom, you need to prepare the room. Dismantling a cast iron bath is the main issue that needs to be resolved. However, this process is quite laborious, therefore, the removal of a plumbing product involves the implementation of several stages of work. In addition, the removal of the cast iron bath is also an urgent problem in the process of repairing a bathroom.
Renovating a bathroom is not an easy task, because before you get a beautiful and updated bathroom, you have to work hard. First you need to answer the question of how to remove and where to put the old cast-iron bath.
It is necessary to fulfill the basic conditions for preparing the room for the upcoming repair:
How to break a cast iron bath quickly and without wasting time? This question worries everyone who has ever thought about overhaul bathroom. Old cast iron bathtubs can be removed in several ways. The first of which is the free removal and removal of old cast-iron bathtubs.
Tip: There are a considerable number of special services that are ready to dismantle and take out a cast-iron bath in a matter of hours. Moreover, they are ready to provide such a service absolutely free of charge, but on the condition that they take the old plumbing with them. This is not surprising, because today the reception of cast-iron baths for scrap metal is in great demand. Therefore, you can safely use the services of such organizations, for which you will not have to pay a dime.
However, not every settlement has such initiative groups that are ready to carry out not only dismantling, but also the removal of a heavy cast-iron bath.
And yet you should not despair, because there are still many ways that allow you to dismantle and remove the old cast-iron bathtub. For example, you can use paid services craftsmen performing all the plumbing removal work, and from any material. As a rule, such enterprises have their own standard prices for services. And after your consent to dismantle the equipment, the repair team will arrive at the appointed time and remove the plumbing, in addition, they will be able to take out the cast-iron bath, but also for a certain monetary reward.
But if you are going to make repairs in your bathroom without the involvement of specialists, you will need to dismantle the cast-iron bath with your own hands. In reality, this process is not as complicated as it seems at first glance.
This procedure will not cause complications if the old cast iron bath was placed on supports, without any fasteners, decorative screen or brickwork, well, and, of course, if the dimensions of the doorway allow you to take out the plumbing without first sawing or breaking.
Tip: After dismantling, you can take the old cast-iron bath to the scrap metal collection points, or simply leave it near the garbage bins. Believe me, the next morning there will be no plumbing.
But if the product is installed in a steel frame or lined with brickwork, the dismantling process becomes somewhat more complicated. In this case, you will have to:
How to split a cast iron bathtub? Many video clips answer the question of how to break a cast-iron bath, so you shouldn't have any difficulties.
Important! Please note that this procedure will be accompanied by a serious rumble, so you should not start repairs at night looking.
So, where to turn in a cast-iron bath? Cast iron products are, of course, durable, but not forever. Therefore, sooner or later, everyone asks the question: where to turn in an old cast-iron bath? Dismantling plumbing equipment is a very difficult process, but not final, because it becomes necessary to take out the old cast-iron bath.
But the fact that the disposal of an old cast-iron bathtub can bring not only troubles, but also a certain monetary reward is encouraging. Because the reception of cast iron scrap is carried out in almost all cities. If you have your own transport and in the process of dismantling you had to break the plumbing into pieces, you can organize self-pickup of cast-iron bathtubs, having previously determined the place of receiving scrap metal.
But if you do not have your own transport and it is problematic for you to hand over an old bathtub weighing 150 kg, you can easily negotiate with special teams that will take out the equipment on their own, they certainly know where to put the cast-iron bathtub.
You just need to find advertisements for your place of residence and contact an organization where you can turn in a cast-iron bath.
As you can see, the process of removing old plumbing can be solved relatively easily, but if you are also the owner of a cast-iron product, you need to immediately determine the address of the company, where to turn in the cast-iron bathtub and get money for it. Of course, if the plumbing equipment is not so easy to dismantle and remove from the bathroom, you will have to sweat for some time, but the result is certainly worth it.
Bookmark this site
Typically, a cast iron bathtub is the most durable item in every apartment. But sometimes during the repair process it is also required to replace it. Some try to endure it entirely, although it is a very difficult matter, due to its enormous weight. Very often in our apartments there are such narrow passages that it is simply impossible to take out the bath because of its bulkiness. And after a little thought, you decide to break the bath and take it out piece by piece. Here the question arises: how to break a cast-iron bath? This article will tell you the answer.
Dismantle the cast iron bath begin with removing the fastening elements.
List of materials and tools:
First you need to disconnect the old bathtub from the fastening elements with which the bathtub was attached, and dismantle the drain. If it is not possible to disconnect the drain, it is cut off with a grinder. You should also remove all objects that may interfere with dismantling the bath (both under and above the bath), and remove the mixer. To dismantle the bathtub, the edge of which is embedded in the wall, you need to dismantle the legs of the bathtub (starting with the distant ones) and, after that, pushing it from above, "drop" it to the floor. Before dismantling an old cast-iron bathtub in this way, it is required to put some soft material under it with a thick layer to soften the impact of the bathtub on the floor.
Breaking a cast iron bathtub will not be easy. This job requires a strong man and a sledgehammer. Before proceeding with the scrapping, it is necessary to clear the space around the bathtub, lay a soft cloth on the floor (to protect the floor), put the bathtub itself on its side so that it has free access from both sides. Breaking a cast-iron bath is a rather dangerous job: there is a high risk of injury from flying fragments of the bath. To protect yourself from these debris, you should wear heavy clothing, shoes, a hat, construction gloves, and a face shield. Soundproofing headphones can be worn to protect your ears from loud enough noise.
To minimize the risk of injury from fragments of the bathtub, remove household members from the room.
How to break a cast-iron bath without extra effort? The weakest point of the bath is near the drain hole. To break it, one should inflict a series of blows from the inside in the bottom near the drain hole.
Lay the tub on its side to make it easier to break.
After it turned out to break the bottom, the bath should be covered with burlap and hit with a sledgehammer, widening the gap along the entire bottom. Do not forget that the bathtub must lie on its side during the entire process of breaking the bottom. vibrations of the bathroom, which, when the bottom is broken, lies upside down, can contribute to the fall of the plaster in the apartment located below you. All blows must be delivered from the side.
After you manage to break the bottom, turn the tub upside down and continue to hit the sides with the sides, trying to break it into pieces. If necessary, large pieces can be broken into smaller pieces: the smaller the pieces, the easier it is to take them out of the apartment. At the end of the work, collect the fragments in bags: they can be handed over to the scrap metal collection point.
In most cases, bathroom renovation is inherently associated with replacing an old bathtub with a new one or even with a new one - and in either case, you will have to go through an operation such as dismantling. In principle, it is not difficult to carry out, but if you have to deal with, then don't ask for it here - you will have to sweat a lot. In this article from the site, we will tell you how to properly and with the least effort to dismantle a cast-iron bath. Moreover, at your choice, we will offer as many as two ways to solve this problem.
Dismantling a cast-iron bath photo
In fact, such a dismantling of the bathtub will require you to rip it from its familiar place, set it in a certain position and simply pull it out of the apartment, spending a huge amount of effort. You cannot cope here alone - at least two pairs of strong male hands are needed. The only way to make the job easier is by avoiding intermediate ineffectual actions, which usually happen in those cases when people do not know what they are doing. The principle "maybe it will pass" only leads to unnecessary effort and loss of energy - you can avoid this if you adhere to a certain sequence. The question of how to dismantle a cast-iron bath is solved as follows.
Dismantling the bathtub with a grinder photo
How to remove a bath photo
As you can see, the question of how to dismantle a bathtub made of cast iron is easy to solve, but even having mastered the technique of performing these works, you still have to sweat a lot.
This is the easiest way to solve the question of how to clean the bath - and you will have to strain much less with this approach to business. In fact, you just have to smash an old cast-iron bathtub with a sledgehammer - as they say, breaking - not building or even disassembling. But, despite this, such a dismantling of the bath should also be performed, as they say, with feeling and disposition, so God forbid not to injure yourself. If you represent this method of removing the old cast-iron bath point by point, then the order of work will look like this.
How to break a cast iron bath photo
In principle, in almost all cases, this is enough to easily carry an old cast-iron bath to the street with the efforts of two strong men. But if you independently decide how to break a cast-iron bath, then to facilitate the task it is generally better to chop it into pieces, put it in bags and take it to a landfill or scrap metal collection point. For further work the grinder is no longer needed - the sledgehammer does an excellent job of crushing brittle cast iron into small pieces.
How to dismantle an old cast-iron bathtub using a grinder, see the video.
So, with the question of how to cut a cast-iron bath, we figured it out, now it only remains to highlight the topic of work safety. Without this, nowhere - the disorganized work of two people and even just the misuse of a grinder or a sledgehammer can lead to serious injuries. So what should you watch out for when dismantling a cast iron bathtub?
How to dismantle a cast-iron bath with your own hands photo
This is how things stand with the answer to the question of how the dismantling of a cast-iron bath is carried out. It should be understood that despite the seeming ease of the entire procedure, in fact, this work is difficult and difficult. In many ways, it depends on the size of the cast-iron bath - if we talk about a small bath 1.5 m long, then it is easy to handle it. But with large products of this type (for example, with a bathtub 1.7 m long), things are much more complicated, and their weight is to blame, which goes over 100 kg.