Radius corner cupboard coupe - non-standard solution To fill the corners in the room. They have a large capacity. In addition, side open racks complete the composition and add an additional place to store memorabilia and decor elements.
Cabinets such a design have many advantages, have features of internal filling, as well as design developments allow you to expand the range of available models.
The variety of models is distinguished by its peculiarities of the external and internal structure. However, the general advantages are traced in each of the radius-wardrobe model. The strengths are as follows:
The largest minus such models of the wardrobes are considered a high cost. Due to the fact that the design has many complex elements and mechanisms, its assembly and installation may be accompanied by the difficulties of the process. An experienced specialist will solve any puzzles, so the assembly and installation should be entrusted with proven furniture makers. Some craftsmen are solved on independent installation and even the cabinet assembly.
In order for the radial wardrobes-complised by their own hands did not have a non-sustainable appearance, you need to try well. For this, it is important to have some skills to properly draw up the personal scheme of the future cabinet and the calculation of the size. The most difficult thing is to calculate the correct radius. It is he who sets the radius of the top guide. Many factories and furniture manufacturing companies are offered to use the service. individual order All components of the cabinet. To do this, the master itself must draw up clear calculations for which furniture makers will be able to make and send all components of the design.
In addition to the "box" - the case of the cabinet, it is important to pay attention to other details and mechanisms. For self-assembly The cabinet from A to Z, the following elements will be needed:
Radius type is a carriage with the top suspension. It serves to move the door of wood or aluminum along the track. This mechanism includes the following details:
The profile for radius cabinets is a radius guide. It is made from aluminum under the order, taking into account the individual radius. Her goal is to provide smooth sliding rollers, attached to the ceiling of the cabinet. Maximum length Radius - 6 meters.
The carriage is made of zinc and aluminum alloy, its composition includes a bearing. For one door, you need two carriages. Purpose of such important details It consists in moving the door on the guide. The carriage has a feature - adjustment in height.
The stopper limits the movement of the door and fixes it in the desired position at a certain place of the track. It is made of a piece of plastic, and attached to the edges of the upper track.
The bottom roller is made of plastic, attached to the podium or on the floor. His goal is that the door does not swing, each door should be installed on one roller.
The first thing to do is to determine the calculation of the radius of the future cabinet. The corresponding size prepare the ceiling and the podium of the future product. The height, width and depth is measured, and the question of the number, size and radius of doors can be solved, which can be made under the order. Cabinet parts can be made of any kind of material: chipboard, MDF, veneer, natural wood.
When calculating, consider the following:
The drawing is performed on the scale of 1:10, and then transferred to the details of the genuine value. On the finished drawing to order the doors of the required radius and sizes are manufactured.
A concave or convex shape of the cabinet affects the shape of shelves and internal filling items. Some shelves can completely repeat the circuit of the cabinet radius. The angular cabinet most often has a "dead" zone in depth. To fill the place and use it rationally, in small closets in the corner itself, there are volumetric things and household appliances, for example, vacuum cleaner. In large cabinets install dressing tables with make-up mirrors or sports rigging equipment.
The location of the wardrobe has a significant impact on the internal filling. For example, in the hallway in the closet there is a bulk outerwear, many pairs of shoes, umbrellas and other things. The wardrobe in the bedroom should provide a place to store underwear and other accessories, as well as large, deep and spacious shelves for bed linen, blankets and pillows. In the hall, the corner cabinet can move in a shaped form. Such a model is combined, it includes closed zone Storage of things and open rack. On the shelves can be stored books, decor and even a TV or music center.
For ergonomic storage of things, it is important to know and adhere to the established standards emanland from the average physique of a person:
When buying furniture directly from the factory there are two ways of delivery:
The cost of delivery of the transport company is paid upon receipt of furniture.
When ordering furniture from the factory, the assembly services are provided only in Penza and the Penza region. Residents of other regions recommend contacting a specialized organization in your city.
Each element of furniture is equipped detailed instructions Assembly. In case of issues, contact our phone or skype managers.
When buying glass showcases directly from the factory there are two ways of delivery:
In the photo - packaging of bent and straight winds that allow you to deliver shopcases in the destination.
Packing bent and straight glass
When buying a bedroom furniture Galant and Prima directly from the factory there are two ways of delivery:
When buying furniture for the kitchen directly from the factory there are two ways of delivery:
In the photo - Penal Packed and Kitchen Tumes, which allow you to deliver to you Furniture safe.
Penal Packaging Stage
Penal packaging
Starting stage of packing of the cabinet
Packing Tube
Today, increasingly growing demand on the wardrobes, especially the rounded shape. It is connected not only with their attractive appearance, but also with structural characteristics, as such furniture is quite spacious and is able to transform the interior to be unrecognizable. Unfortunately, these designs are very expensive and not everyone by pocket. Therefore, despite the whole difficulty, we suggest you make a radius wardrobe with your own hands. In this article, our specialists will tell you in detail how to make and assemble such a design yourself, and will also reveal all the nuances and the subtleties of this process.
The main feature of such structures is rather unusual form, which allows you to place them in almost every room. This type of furniture will be the most relevant in small rooms, as despite its capacity, the radius wardrobes occupy a very little space.
Important! The side wall of the standard direct wardrobe in the width is at least 60 centimeters. Radius structures may not have side walls at all.
Such products can be made absolutely any form, and thanks to a special sliding mechanism, the cabinet can easily hide into the niche allotted under it.
In addition, the installation of a radius wardrobe has a number of advantages:
Before making a radius wardrobe, it is very important to determine the type of design. On the modern market Today there are only two types of such products:
Important! The only drawback of the furniture of this species is its overallity.
The main feature of all cabinets is their sliding system, which is made from a steel or aluminum profile.
As for the profile thickness, it must be no more than 1.2 millimeter.
Important! If the profile thickness is less than the above parameter, in this case there is a risk of anodizing the coating or loss of the material facade of the material.
It should also be remembered that after mounting the glass will be in constant voltage, respectively - the profile must be selected quite strong so that it is able to withstand such a load.
Important! Today you can find a finished curved profile wide up to 2500 millimeters and radius in the range from 300 to 5000 millimeters.
In addition, before making a bent the door for the cabinet, it is very important to choose the slip system. IN radius structures They can be two types:
Important! Designs with a suspended mechanism are considered unreliable and poor-quality, since the main load is only solely on the cabinet itself.
At the expense of its original and very non-standard form, we will pay more attention to the door of the radius wardrobe, which consists immediately of several elements:
The process of making a radius wardrobe is divided into two main stages:
To begin with, it is very important to determine the size of the future product. In this, an excellent helper will be an online constructor.
Important! Online constructor is a special softwareIn which the necessary parameters of the future design are specified. After that, based on this data, the future appearance of the wardrobe, the number of doors and filling is selected. Thanks to this design, you can visually see the future product.
In order for the finished result to surpasses all your expectations, we bring to your attention a few tips that will significantly simplify the entire design process:
To make a high-quality design, it is also very important when designing to know and take into account the following factors:
In addition, before assembly, it is very important to prepare the tools and materials in advance that you will be needed during work. You will need:
In order to make a radiuscase with their own hands, it is very important to adhere to such a move:
Important! Pay attention to the fact that radius roller systems attached to the ceiling should not be installed on the surface made of plasterboard and similar materials similar to it. This is due to the fact that the average ceiling load will consist of about 30 kilograms, and during the opening and closing of the doors, they will still create additional vibrations. Accordingly, the plasterboard ceiling simply will not endure such a load.
The manufacture and assembly of the radius wardrobe will not be much difficult if you picked up high-quality materials and produced right calculations. Also, do not forget to apply in practice the above-mentioned tips and recommendations of our specialists. Thanks to them, you will not only significantly save time for the manufacture of this design, but in the end, get a quality product that will delight you and your loved ones.
In this article, we will analyze frequent errors that allow novice furniture makers when designing a wardrobe. Sin himself, was noticed in a pair of them))
1. Error №1 this cabinet for the project is bivalve. Everything, it seems, is good, there are branches for clothes, shelves for linen and retractable drawers ...
But, put the two doors mentally in place, which will overlap each other in the middle of the cabinet. Those. The average section at any position of the doors will be open no more than half.
Correction options -making three doors if the wardrobe is allowed (we remember that the ratio of height to the width of the door should be no more than 1: 4). The second option is to make filling the wardrobe double-piece.
2. Error number 2.First, look at the left cabinet: everything seems to be all good again: two sections, two doors, but if you again mentally initiate a coupe system, then it turns out that the boxes when trying to put forward them will rest in the profile handle ...
Correction options- Making the left width compartment is less than half the cabinet, if you need to make the right section of a strictly fixed width (on the example, it is set to the width of the shoulders for clothes), then you can only narrow the section with drawers (see Fig).
3. Error number 3. Revonds again retractable boxes. In order from left to right. The bottom box will be from the floor by 3 mm. It seems that the gaps are taken into account, everything should work, but we apply the lower guide to the place, the height of which is 5-6 mm and everything ... The bottom box is not functional.
Correction options -raise the bottom box above the floor to a height of at least 15 mm (the second drawing), but in this case there remains a large slot. To level this defect to lay down under it "Pen" from a piece of 16 mm LDSP width 100 mm, we make an indentation of 3 mm on the opening and voila - everything works!
4. Error number 4.
It occurs when designing corner wardrobes. It lies in the fact that the calculation of the width of the door of the coupe is carried out by the width of the front edge of the lower horizon.
With all the time, the length of the first track of the guide is less than the second, so the doors of the same width do not overlap each other.
Correction options -correct the door to the coupe correctly, you can use the article posted earlier.
I hope that considering this material, you will not allow such "children's" errors in the design of their wardrobes, and, it means that you will not have to redo anything. After all, it is not for nothing: "Some seven times and a rejection once!"
The wardrobe is a real salvation for small (and for large) apartments. This is placed whole heap of clothes, seasonal things and even small appliances. But how to choose, make and install the wardrobe so that he and the eye pleased, and stood for a long time? Some very typical mistakes When designing and installing a wardrobe, a wardrobe manager ("Cabinet for you") Catherine was led and commented on.
Error 1: bad project
"Why is the project in general, if there are dozens of excellent models in the journal?" - You ask, and you will only be right away. Indeed, if the situation from the picture and your houses look like twin brothers, then you should not spend time on the design project.
But there are other cases. Exhibition instances are usually higher and wider than standard models so that everyone can see. The fit under your sizes can significantly distort the appearance of the cabinet. It's like with models on the podium - what looks good on them, it is not necessary to make the size of your girlfriend perfectly on the 48th size.
Not obvious, other factors also affect the external perception: solar or not you have a side, an elongated or square room, dark or light gender, which chandelier size, etc. It may turn out to be so that after installing the closet you will feel like in the afterlife of the kingdom or as in questioning to all-seeing ok. So the project should be individual and take into account all the features of your room.
Solution: The project should do (well, or at least customize under your parameters) professional designer.
Error 2: Inappropriate Material
In the shoe store, you always go to the shelf with leather products - this is the "best". But few knows that in winter in a strong frost shoes from artificial materials protect your legs from the cold are quite better.
Very similar situation and closets. You are confident that the wardrobe from a good array of some oak will shoot 200 years and will serve faithfully. Similar delusions are bugged you and some non-saintes. But everything is not quite so.
Indeed, a large weddown cabinet for the living room in a huge country house It may well be appropriate. But for the apartment in Minsk (and any other big city), it makes no sense to remove precious square meters for useless thick wooden walls. In addition, the doors made of natural wood are very heavy, so they cannot be put on miniature wheels and ride on rails.
Most right choice By the ratio of quality / load / price - a jewelry cabinet made of laminated chipboard. The material itself is durable, but the light, the shelves can withstand more than 100 kg, and the price of it is very pleasant. In addition, chipboard can be decorated as your soul. By changing the facade, it is easy to choose suitable bedroom cabinets from shkaf4u.
Solution: Do not chase for "expensive-richly", but choose easy and durable material type chipboard.
Error 3: Curve Calculation
You will be surprised, but not all rules, roulettes and centimeters are the same. It so happens that the production is allowed to deviate into one, or even several divisions. And with a wardrobe, the purpose of which is to withstand kilograms of things, even an extra millimeter can play a cruel joke. If the walls and guides at least a couple of mm bevelled, smoothly and silently the door will never ride them (if at all). So because of such trifles, as the wrong measurement, even the best wardrobe from high-quality materials can become a waste of money.
But the most common mistakes in the calculations happen precisely for such a reason as the "non-ideality" of the "box" itself. Somewhere the wall went space, in another place the floor is uneven, and here there is a niche curve, etc. Masters working on similar projects already know the most painful sites and the most convenient heights for measurements. The same calculations may not be enough, and as a result of the cabinet with some left upper angle, simply will not be included in the reserved niche.
But even if all centimeters are checked, and the walls are aligned, no one has canceled a simple human factor and eye error.
Solution: Solutions here are several. Or you take a single lineup and it is measured by the size of the walls, pieces of material, the height of the shelves, etc. etc., or trust specialists who have all the tools have already been tested and "run-in" on real projects.
Error 4: amateur installation.
Here the problem can jump even where you are not waiting for it. For example, not all screws and wrenches when installing a wardrobe must be twisted until it stops. This nuance is especially important when installing sliding doors. From tilt the bolt in the profile depends, whether the door will firmly fit to the door, how smooth it will be, etc.
If you listen to our previous tips and decide to choose a cabinet in Minsk to a children's chipboard, then when it is installed, you will have to face difficulty. Wood-chipboard - capricious materialrequiring professional attitude towards yourself. He does not like "random" holes and coarse treatment.
A separate item always goes to install a wardrobe with glass facades (lacker, lackel, mirror, etc.). Homemade "Masters on All Hands" loves to scratch something, tear or split, and then roll everything for delivery or marriage of production.
Solution: Even if you have twisted the details for the cabinet somewhere from the hands and exactly sure that it will suit you - it is better for the installation for consultation to a specialist.
As you can see, there are few major errors, and they are all lying on the surface. Nevertheless, day-to-day clients come to the "wardrobe" with a request to remake or fix something. We hope if you listen to our advice, you will become the owner of an excellent interior object and a reliable wardrobe. And the most correct decision is to charge specializing only at work with the company's cabinets of the company all work from the development of the project to the final installation!