If you think to build a bench at the cottage and want to go beyond the framework of everydayness and create something really unique, then you are in the right place. We collected for you a selection of the most original and unusual designs shops and benches that you can make with your own hands. Moreover, we will show you how the benches in the photo are made.
The most common benches are wooden. And it is not amazing! The tree is the most affordable material for the construction of the bench. The design of the designs here is truly huge! We will give you some examples.
To create such benches, you can use the remains of the cut garden trees. The trunks and thick branches will go into business. 
Even short trimming wooden bar Can become in the skillful hands a unique garden bench.
Easy to do from high-quality material, even if it is a bit. But also from the girlfriend, such as, also get good garden benches as on this photo.
Looks like a bench can be made of any wooden design. These are made of wooden coils from the cable.
It is difficult to imagine that you have unnecessary wooden barrels in good condition. If yes, then here is the option of garden benches for you.
Funny garden bench from one log.
If you do not buy a ready-made bench, but make a bench do it yourself, then you have a chance to give her a unique kind of very little effort.
Not necessarily your bench must be completely wooden. Here is a popular simple design bench from building blocks and wooden bars.
Probably, most of us just threw the old unnecessary boat, but there are among us and people with the ability to see beautiful literally in the rubble. The bench from the boat in the photo is just wonderful. It can sit in it not very convenient, but you can sit in Turkish. But even look at this bench is nice.
Bench for the most brave.
Often beautiful benches Do not differ in complex design. In this case, individuality and personal attitude towards the garden are rather important.
We offer you four basic bench designs, on the basis of which you can create your amazing and unique benches, which there are still no photo.
This simple bench in the photo is made of just a few boards. Such used to be often made in villages for everyday use. It is stable, and most importantly - it is easy to transfer it from place to place. Such a bench will serve both in the house and in the kitchen, and in the courtyard. At the same time, it does not require high material costs, and it is very easy to make it. The most difficult thing is to make neat cuts in the boards at an angle to get the legs.
It may seem that sterns in front and rear - a purely decorative element, but it is not so! It is they who give this bench rigidity and stability.
Therefore, in one or another, they are present in the design of each such bench.
Sometimes, although such a rigidity is only one thing. Then it passes in the middle under the seat.
If you need a big bench, and you do not plan to translate it from place to place, then this option is for you. This spacious shop is equally perfect for use both indoors and on the street. It is made of a thick bar, so it can easily withstand three or four adult saddles.
It is also not difficult to build it. First you need to make such legs.
Then the legs are bonded by longitudinal bars (two above and one below), and it turns out a durable massive frame.
Using such a device, you can drill holes and hide fasteners on the inner surfaces of the bench parts so that the hats of the screws do not spoil the type of product. But if you do not have it, you can still make such a bench, stresting the details in the usual way.
It remains only to collect the top and attach it to the frame.
But an example is a very beautiful and original bench, in which there is not a single nail or self-drawing.
It is done very simply, although this requires some special devices. First cut all the elements.
And then with the help of clamps and templates, parts are thrown into a chess order.
Clamps will need a lot, including several large, so this project is only suitable for those who have an impressive set of joinery tools.
A bench made of wood is one of the oldest items of furniture that was used by a person. Previously, in order to create a comfortable bench, it was enough to take a conventional wooden snag, thoroughly cutting it with a stone ax and ready. It was she who became the great-grandfathers of modern furniture, in particular wooden benches, which are relevant and in demand to this day. It was the bench can be a popular element in both the house and the attached territory of the cottage.
At first glance it seems that the bench is not an important element landscape design, However, this is completely wrong. Specialists confirm the fact that it is from the bench that the garden design begins and it ends and ends. After all, why then such a rich variety of choice and what to invent the original benches of the bizarre form, if they are not so important and nobody can enjoy?
It is because of its importance that you need to pay a little attention to the placement of furniture. It is best to install it where the most beautiful and charming look opens, the bench itself should become an elegant emphasis that complements the perfect beauty of the country garden.
A comfortable shop in the garden of the summer cottage can be exactly the place where you can retire, breaking away from everyday rustle, relax and slightly translate the spirit, just enjoy the view of nature, feel unity with her. For complete enjoyment, you can read a good book, listen to quiet and quiet music or just go to a mental journey. In addition to aesthetic use is also functional, because the bench is primarily the subject of furniture, as well as "weapons", which can be used to zoning the adjacent area.
Garden bench for cottages has a number of functional destinations, namely:
Optimal dimensions for the bench, which will be posted on the territory of the country area:
The best material for the manufacture of benches - wood, the most resistant to moisture and rotting - larch, cherry, nut and oak. Most. optimal option It is a tick that contains natural resins in its breed, which protects the object of furniture from rot, and various insects that destroy wood rocks.
Form I. appearance The shopkeepers depends only on whims and fantasy of man, which will create it. Waking up the construction of the bench personally, you can realize all the ideas in life. If a country style was selected, then the shape of the shop must be as simple as possible, and the color of the brown or natural. If you build a bench in the style of Provence, you will have to make an old bench, then paint it into white or blue colors (blue, purple, blue).
If the cottage has an inclination eastern style And the shop should fit it, then it can be made of bamboo. In general, near wooden cottages Veneers should be installed from a similar breed of wood.
Often the bench is made of wooden bars, rails or boards as they are easy to manufacture, have a long service life. The exemplary parameters of the shop are indicated above, the length of the shop depends on the desire and ability. It is important to note that the specks cannot be placed closely, as they can start grew due to the stagnation of rainwater. It is necessary or placing the rails at a short distance, or use one solid wide board.
In order to create an original bench not necessarily spending money on expensive materials, because the masterpiece can be created even from branches and roots. Correctly processed natural wood, pallets and fallen wooden tables You can create an unusual and interesting bench with natural forms.
The most elementary example of a ascetic bench is the "monastic" bench, which is made from a tree painted along the trunk installed on two round supports. The support is performed from small trunks of a small diameter.
Increased humidity is the main problem for wooden benches, so it is best to use mobile type shops that winter You can put in a barn or house. It is also best to set a bench on special lining of rubber or bricks in order to prevent the dirt moisture in the tree.
The bench is simply necessary in the country or the household plot. The main purpose of its purpose is a place to relax. He who knows how to work, should be able to rest. Someone simply sets the bench, and someone creates an interesting corner, which certainly has a full-fledged rest. You can just relax, but you can just enjoy the environment and from the results of your work. There are many ideas worthy of attention. Of particular interest are the usual designs that can repeat any person familiar with the tree and owning a primitive set of tools.
Everyone can imagine what kind of the most common bench is, but not everyone is simplicity and most of them stops their choice on original solutions. Everyone wants to have something that is not, for example, a neighbor in the country. Almost all daches start with the decoration of the country or the nice site, and here there are also many options. Alternatively, you can take a design site from the installation of the bench, after deciding with the place of rest. After all, the place of rest is not needed later, it is necessary now. Therefore, the design of this place should be done in the first stages of the process of decorating the country or the nucleotop area and only then begin the design of the rest of the territory.
As a rule, summer houses are very crowded with growing various green plantings and colors. Especially, there are many of them near the buildings. Alternatively, you can combine plantations with a seating area by installing the bench not far from the cottage. In this case, everything will be organically looked: both green plantings, and flower beds, and an original bench.
Two flower beds from the boards and between them bench Variants are a huge set: from the simplest, to the very wisdom. The easiest option may consist of two wooden boxes in which flowers are planted, and two boards built between these boxes. Boards must be sharp and well sandy. This design can be positioned directly near the cottage wall. On the wall you can fix a couple of the same sharply boards, which will serve as a kind of back. Instead of wooden boxes, concrete courses can be installed, which will be able to stop much longer wooden elements.
A similar design is very simple, and most importantly quickly. As for the boards, they can be purchased ready or made under the size itself, using non-processed boards. But in this case, you will have to work hard, but the bench will not cost anything, and the result will definitely please. If concrete colors are used, the boards can be fixed using metal corners. The only problem is the complexity of drilling holes in concrete. In no case cannot be used the perforator, since the vase, even concrete, it will easily split, especially if it is made independently.
You can not mount the boards, but instead of the boards put a huge log, which is not necessarily fixed, if you correctly install it.
As mentioned above the variants of the set, and they are created on the basis of real possibilities that the owner of the cottage. Alternatively, you can simply install a stay shop away from colors and green spaces. After all, it is no secret that various insects are hidden in colors and between the leaves of plants, which do not have rest, but on the contrary, make it take to leave behind the worst memories of rest.
As a bench, you can apply hollow blocks, in the voids of which processed boards are simply inserted, which can serve as seats.
To make it convenient to sit, sharp block corners should be rounded. Well, if these blocks are heavy and large. If the blocks are small, they can be coppped with studs in one.
The site can be issued in any style, but almost everyone leaves the standard approaches to solve the problem. Everyone wants to have something to have something. But not everyone knows that a new one, it is an advanced old one. Alternatively, a new, but somewhat enhanced old, is an option to use a log, as a bench. As a seat, you can use a log of large diameter, painted along. As a back, a log of smaller diameter is used, as painted along. Or a smaller barrel diameter, but cut closer to the edge. As a leg used narrow logs of the log.
Bench from the log - quickly and just The legs and seats are connected to each other with metal pins. Under the pins are drilled by a slightly smaller diameter. Pins should enter holes with effort. At the same time, half of the pin is clogged with blows on the pin, and the second half is driven by a tree blows. As a rule, they are hit without the tree itself, since traces of the hammer can remain, and with the help of a wooden backup. Such a connection must be reliable, although the mounting options are set.
In the photo, slightly higher, you can familiarize yourself with another option, in Ethno style. His organization is associated with the presence of a stone, although this option is quite realizing in the presence of a log. As a seating, a rather thick log is used, and as a leg is a part of a large diameter deck. In one and another part of the deck, the grooves under the seat are cut down. As a tool, an ax or Bulgarian is used. Alternatively, you can resort to the help of chainsaws. This is not post-Soviet "friendship" or "Urals", which have a considerable weight, and they, except that, convenient to equip pines in Siberia. If you take adjust to the chainsaw "CHTIL", then with its help you can do not such works of art.
From the logs really make a table that is simply necessary in the country. In the photo you can see the results of such actions. The countertop made of boards, and the rest of the ensemble from the logs from different diameters.
Bremen Benches Table The next bench, built in this style, has a completely original execution. Here, legs and armrests are made of branches of various thickness, and the seat from the treated, high-quality unedged board.
Another bench is made in the same style. The only difference is that the boards and branches have the opposite direction. As a result, it turns out a completely different look. As for execution, no special skill here is required. The careless end result, the more valuable. In any case, so perceive the surrounding similar approach. Most likely, people are tired of imaginary perfection and they are more likely to shrub and primitivism.
Wicker back - meet infrequent Alternatively, around the tree you can organize a platform for relaxation and install a bench.
Place for relaxation under the tree It is not at all difficult if you have a swing and a gazebo nearby. Above the bench is better to build pergola, similar to the arch. For a full-fledged rest, there is not enough pond, fountain or waterfall.
As a rule, no one decided to build a bench made of metal. In the summer, they can heat up to such temperatures that it makes no sense to speak at all. In case of cooling, the picture is the same. The bench becomes so cold that it is impossible to sit on it. But benches where the combination of metal and wood is used is the most in demand. As a rule, the frame is made of metal, which ensures high reliability of the design, and the seat and back is made of wood, which provides certain comfort.
Bench is profile pipe
If the design improves and make soft armrests, soft seats and backs, as in the photo, then such a design can compete with the most modern options Stamps for recreation. To make seats, armrests and backs are soft, sufficiently cover suitable material Furniture foam. In a similar style, it is possible to build a tabletop.
On a note!When using wood, it is desirable to leave between the individual elements of the gaps up to 5 mm. This is due to the fact that when the environmental humidity changes, the dimensions of the elements are changed.
Stylish Metal and Tree Vegetables In the process of creating a platform for recreation, you should take care that there are no sharp corners, especially in metal structures. This is very important if there are children. All elements of the ensemble, such as benches, tables, garden chairs are made of round and square pipe, flexing them so that smooth transitions come out.
Table and Bench Pipe and Board The presence of metal allows you to bend the design of any form, although it will not be so easy to do and need a special device. The presence of such features allows you to curb the design in one occasion, without applying other tools for this, such as Bulgarian and a welding machine. The main thing is to consider the design to the smallest detail. If a tree is used, then only well-processed. It is impossible to allow the wooden elements to be present sovereigns or chips.
The most popular option is benches from boards. Many fulfillment options. There are even structures similar to sofas. If you put soft pillows on them, then you can lie down.
This garden bench is more reminiscent of the sofa: with sufficient sizes and you can lie down. Designs sadroom furniture, on the basis of a modern approach, are assembled elementary. As a rule, they consist of rectangles with partitions made of a thinner tree interconnected into one.
If you strain and make your fantasy work, you can build a work of art from a conventional shop, if, for example, instead of legs and armrests, install wooden wheels.
Shop from boards with back and wheels instead of the sideways - it looks interesting One of the most simple designs of the country shop consists of one board, to which the legs are fellow in the form of the letter "X". Similar shops built our ancestors, although they can be found today.
Traditional layout design Using a tree, you can build a bench in the form of the letter "P". In this design, it is very important to ensure reliable fastening of the seating and legs. Such an option involves the use of a thick board or timber for reliability. Alternatively, you can install the "on the edge" board, for greater rigidity, and for greater reliability it is recommended to secure with metal corners.
This photo contains an option where it washed under 45 degrees. With the help of a special tool, this is not difficult. If all parts are connected, then the angle is 90 degrees. If the board is fat and the seat will not be fed, the bench will last for quite a long time.
In the photo below, you can see another option of an interesting solution, which is characterized by increased reliability. As legs used boards of different lengths. The difference in length is the thickness of the board: each second board must be shorter. Connect the design with nails. Moreover, through one board, nails are clogged either into the seat board, or to the board for the legs.
Modern Style Bench Along with the classic approach to the process of manufacturing benches, there is also an original, although appropriate materials and tools are needed to solve such a task.
For example, from a large stone you can also build a bench if it is consolidated to secure the appropriate platform from the tree.
Bench of stone and boards If there is a bamboo from it, the seat is also made, which will take more exotic appearance.
From bamboo, and a whole Or stone.
Sitting winter will be unpleasant, but beautiful ... It all depends on the flight of fantasy. This owner has no unnecessary things or materials in the country. With a reasonable approach, you can attach any thing, and it will not be just like that in the country or lie in a dead cargo in the garage or in Saraj.
Naturally, each host has a set of tools for making stone benches, but everyone has a minimum set of tools for working with wood, especially since it is very simple and accessible tools. Therefore, it makes sense to consider structures from a tree. Everything that is done with your own hands is ultimately the subject of pride.
Design, although simple, but has a rather spectacular view due to the material used. As a leg serves a ram with rounded edges. In extreme cases, a similar timber can be prepared independently of round logs of a small diameter, sneaking them from 4 sides. The result will be the same bar. Therefore, problems with the construction of the bench should not be. From this material will be made legs benches. To do this, you should lay the sliced \u200b\u200bbars plafhone (horizontally) one on another. It is this design solution that makes a certain exclusivity in the design.
A simple shop looks interesting due to the material A bench without a back is 120 cm long, 45 cm wide and 38 cm in height. Round the face of the bar is permissible in any way. To not really strain, you can already find a ready-made, profiled timber. Although it will cost much more expensive, but it's a pleasure to work with him.
Depending on the size of the bench, it is not difficult to calculate how much a bar is required. If the timber is taken, a cross section of 70x70 mm, then with a height of the legs of 380 mm, it is enough to put one to another 5 bars. We believe: 45 cm multiply by 5 pcs. And it will turn out 2.25 m timber. Since the legs 2, the timber will go 2 times more, which means 4.5 meters of timber. A board, a thickness of 40 mm and a width of 90 mm take place as seating. Given the width of the shops will need 5 boards, 1.5 meters long. If you calculate more accurately, you will need 1.2 m x 5 pcs. \u003d 6 m boards.
At the first stage, the boards are cut according to the size. At the same time, it is necessary to round all sharp edges. To do this, you can take a rupture or simply large sandpaper and carefully process the boards. To do not particularly engage yourself, there is another option: you can simply agree on the sawmill and get a well-processed board, especially since they have all the possibilities for this. It remains only to take and cover them with varnish.
Processed boards After that, it is embarrassed for the manufacture of legs, for which the brushes are cut to the same segments, 45 cm long, after which they are folded one on another 5 pieces. The next step is the connection of the stability legs. In this case, it can be copped with metal pins or with wooden brazers. The distance between the fasteners is 7-10 cm. As a rule, such a compound is made using glue, then the connection is obtained more reliable.
Lines on which pins will be installed The pin compound requires accuracy of drilling holes, otherwise the bars will not be on the same line. To do this, it is better to use the template. In addition, the dimensions of the elements of the legs should be the same, then it will be possible to accurately place the location of the holes. For those who are familiar with drawing, roulette and pencil, will not be much difficult to do everything right.
Pins should be installed in a checker order, therefore it is necessary to note in mind this particular. The same boards are attached to the legs at the calculation of two holes per board.
If you look from a technological point of view, this is not a bad connection option, but it requires a certain skill and work experience with the tree. The compound stage can be simplified if the bars for the legs fold one on the other and rigidly connect them using clamps. Then the accuracy of drilling will be provided. Alternatively, the bars can be combined with long metal spills and nuts with washers. In this case, it is enough to drill through 2-3 holes.
Seats can be nailed to legs with nails, which makes it much easier to make all the technology of manufacturing such a bench.
The bench is made with your own hands. Stroperation remained When using nails, the hats are preferably told, because they will then rust, which is completely undesirable. For this, nails are clogged so that the hats do gripped the tree in almost 5 mm, for this you can use a copper. After that, a putty is taken, a little sawdust is added to it to suit the color, and the recesses are spun. After complete drying, the places are thoroughly sandwiched with sandpaper. So that the place where nails are not stand out on a general background, they are covered with a suitable varnish.
The technology of autopsy lacquer of wooden surfaces is quite simple, especially since it is described in detail in the instructions for use.
If there are two old stools and did not have enough fantasy to adapt them somewhere, then you can make a bench. They will only go the same and strong enough. If they are loosened, they will have to repair them. Chairs are sacrificed so that the backs and legs remain. After that, two stools, or rather what remained from them, are installed near and connect their backs with the help of the rivers of the corresponding thickness.
Bench of old chairs In order for the design to be rigid, at an altitude of 20 cm from the floor, the design is associated with the same rails around the perimeter. Subsequently, these rails will serve a footrest, and if the bottom is to sew, for example, plywood, then you can store any things.
Prayes made design After the design is enhanced and ground, you can paint it. In this case, the usual paint is suitable, which can hide some flaws of the whole design and especially old chairs. It remains only to cut the sheet of plywood, put a foam rubber on it and cover some cloth. At the same time, it should be considered the fact that the bench will mainly stand outside to the coldests. Therefore, it is better to stop your choice, for example, on the leatherette. In any case, the material must be moisture resistant.
Finishing bench A reasonable owner, any material has its value. Garden furniture can be easily made from cargo pallets. Moreover, they are not particularly required to disassemble: from one pallets the back is made, and from the other - the seat. It remains only to think about what makes armrests and legs.
That's what should happen One of the pallets is enhanced by additional bars, which are attached with the help of self-tapping screws.
Enhance the corners of the pallets After that, the timber is taken, sizes of 100x100 mm and arbitrary length, after which 4 identical segments are cut, up to 80 cm long. They are attached in those places where the reinforcement bars are set in advance. As a result, there will be enough legs, 20-25 cm long long. Self-tapping screws are used for fastening, no less than 150 mm long. In the process of work, you need to make bars to be properly screwed to install the legs of the same length.
Screwing legs-supports for armrests If after these actions fails to get absolutely smooth design, then the legs can be written at the end if the shop will not be installed smoothly.
Foots screwed The second Paletta is attached to the rear racks, and on both sides - a plank for armrests.
Almost done If there are no such plans, you can simply thoroughly treat the wooden elements with sandpaper, after which the bench just paint any paint, of any color.
Ready Product: Pallet Chair 
Garden benches are the most popular small architectural forms. You can make them any sizes and structures, but besides your direct purpose, the benches are performed and a decorative function. You can make your own hands for yourself a garden bench, using our drawings and photos.
The easiest way to make a bench is made of wood. This is a traditional material for garden furniture, available and easy to handle. But in this case, it can be saved by choosing as the main material the one that literally lies under the legs.
The first option is trees, rods and stumps from the same site or nearby forest stitch, in which the sanitary logging is carried out.
Gently cutting off a couple of medium in size, they can be used to base bench. From the jeres to make the lower crossbar for stiffness of the structure. And for the seating to dissolve on the circular part of the barrel. If there is no equipment for longitudinal sawing, then you can take an unedged board with a thickness of 75 mm.
In this example, the bench is already more comfortable - in addition, in addition to the seat there is a back. The model is a little more complicated, as it will have to find a higher part of the trunk and to process it in two receptions - at first to make a profile cut by the "ledge", and then the workpiece to dissolve into two halves.
And to collect the following bench, you will need:
In short logs, you need to choose a groove so that a long log lay in it. Then the seat is fixed in the grooves, and each storm is fixed at two points - to the base and the seat. For fastening it is better to choose a powerful samongate tree bolts.
Another budget material for cottage bench - Pallelt ( wooden pallets). But not any pallet is suitable for the manufacture of garden furniture. Ideally, you need from a good edged board, the so-called europallet, which can be found in the marking EUR.
Basically, standard width The euro pallet is somewhat large for the seat - 80 cm. You can shorten it to 67 cm, cutting along the contour of the central bar. But you can not do this. Here are some examples of simple designs with different options for bases and seats:
1. Bench of four pallets over the width. Three serve as a base, and the fourth back. The backrest pallet will have to take part of the support bars, and the rigidity of the bench is to provide with wooden plates.
2. In this case, four pallets are also used, but already cut. For fixing the backs, three ropes woven oblique, and for decorating - wallpaper nails.
3. This bench is made of only two pallets. One whole, and the second cut and, as it were, bent at an angle - it serves simultaneously and the seat, and the back. The design is good for its mobility - small wheels stand as legs.
Perhaps the only inconvenience of the use of the European Pallet as a starting material is the standard dimensions of 80x120 cm. They are to some extent limit opportunities for creativity. The use of conventional sawn timber (boards, bar and bar) allows you to make a bench for giving for every taste.
Immediately it is worth saying that any drawing of the bench can be corrected for specific conditions. The only restriction so that the thickness of the board and the cross section of the bar was sufficient to carry out carrier properties.
Below is a drawing of a bench that is made of only three "paired" elements:
1 - front leg; 2 - rear leg; 3 - seat; 4 - back; 5 - front view; 6 - side view
The result is a steady design with a triangle at the base and two transverse ribs of stiffness.
This is how this bench looks "live."
On this drawing bench in a more complex performance. For its manufacture, you need a 40x140 mm board (supports, back and seat), 40x70 mm bar (short bundles of supports) and 20 mm board (long bundle between sidewalls).
And this is the same design, but using a board and a bar with a thickness of 75 mm. Small differences in the base and fastening of ligaments are not fundamental.
It is fundamentally only one condition - the board in the seat is attached with a small gap sufficient to compensate for the extension of the tree at high humidity.
Veneers look original in "Large format".
For example, this is the "fat" unedged board across the entire width of the log. Covered with transparent varnish, it transmits the natural beauty of the tree with all the color transitions.
From the rounded log, you can build not only a cottage or bath, but also such a garden bench.
And from the bar you can collect an original chair that can serve not only under a canopy, but also outdoors - removable pillows in bad weather are easy to put in the house.
Stone, like a tree, also organically fits into the landscape country plot. Of course, a smooth plate in nature is practically not found, but you can use the saw stone.
The following option is easier to execute - the bench is composed of small blocks of wild stones. And since such a surface is not only cold, but also uneven, then no pillows can no longer do.
Pillows add comfort, but they have to constantly bring and endure. That is why for seats in garden benches, regardless of the material of the base, apply a tree. This is how such an original bench, at the base of which the Gabion is used (a cell from a grid filled with stone, rubble or pebbles).
No less popular for the manufacture of the base of the Bench concrete. But to do at once a composure form for the fill is difficult, but a small formwork is simple. And even the "cold seam" when filling in two taking structures (such as in this photo) will not affect.
Another version of artificial stone is hollow building concrete blocks. It is enough to spray them with a good masonry glue among themselves, and in the cavity lay a bar, and the bench is ready.
The most simple in the design of the shops on metallic frame Use a square profile.
You can cook from the profile pipe two sidewalls in the form of the letter "H", and the wooden seat from the massif will also serve as the "rigidity edge".
In the following example, an array of wood is also used as a stiffness element, but the supports are made in the form of a square with a cross-line for fastening the seat.
And this is the simplest self-supporting design of a square profile, in which the strength and rigidity of the weld base is sufficient to make the seat from a wooden bar.
The following photograph shows a factory bench.
But if there is in the domestic workshop of the pipe bender (and it is easy to do and with your own hands), then bend two types of arches and "wave" from a round tube. Then the metal blanks must be welded, put plastic plugs on the legs (sold under any profile and the size of the pipe) and fasten the bars on the "wave".
You can safely relax in the shade of trees in the summer or to warm up in the sun in a cool autumn day you can on a bench made of wood, with your own hands installed in the garden. IN modern design Garden furniture is one of the full landscape design elements.
Taking into account the decorative value of garden benches made of wood, you should try to choose such a model that will harmoniously fit into the environment. For a young garden or summer cottage without big trees It is better to choose the lightweight options for furniture on decorative thin legs made of metal, laconic in shape of simple shops and benches. If the garden is old and well maintained, the Provence style will be suitable - with stylization under ancient furniture with wooden decor.
Overgrown cottage plot with imitation wild natural age can decorate benches, with their own hands collected from natural material - fin, corping, slightly treated branches. Very good in such a garden will look like a bench made by an ax. Such sites should be installed in the places hidden from the eyes: Among the flowering bushes or by turning the path.
When choosing the place of installation of the bench for the cottage, you need to pay attention to the species that will open our eyes sitting on it.
It is undesirable to place a bench so that contemplate the unsightly fence or a compost bunch. Put it near the reservoir or flowerbeds, under the branched old wood.
Then the rest will be supplemented with the pleasure of the smell of flowers and the game of light on the water, the rustling of foliage and coolness in the shade.
Different types of benches can be installed on the veranda near the house in the area of \u200b\u200bthe pool or street focal. They will find applying and under a canopy in the garden. In each case, you need to adhere to the general rules of combination wooden products With the common style of the plot. How to make original Palet benches See this video:
The material for garden furniture is traditionally chosen by wood - lightweight material that allows you to implement almost any ideas. Currently, along with a conventional board and bar, you can use moisture-resistant varieties of thick plywood. From a durable and aesthetic sheet material, you can collect designs suitable for modern design landscapes and for a regular courtyard that does not have certain style features.
If wooden benches are performed in a stationary version, you should take care of protecting them from moisture. This goal can serve as a variety of impregnation and paint materials. Street furniture will have to be filter or varnished once in 1 - 2 years as the protective layer wear. Such measures can significantly extend the life of a wooden structure.
In order to build a comfortable bench with your own hands, you need to make her sketch. There are optimal sizes of garden furniture that need to be observed:
These sizes allow a man of medium growth conveniently to sit, rely on the back, easy to get up. If the host complex is very different from the average indicators, the gabarites of the shops will have to choose individually. The back is usually done with a slight tilt back. Read more about Wooden bears. See this video:
The following tools will be needed for wood:
For the assembly of products of a complex shape, carbon black can be useful. They fasten the parts that are connected by the "Schip-groove" or furniture key (dust). For products from plywood, long metal studs with carvings and nuts will be used.
The simplest wooden bench will be able to make even a novice master. Such shops in abundance can be seen at the gate of village yards, they can be put near the beds, in a bath or utility room. They do not differ in sophistication and decorativeness, but the functions of garden furniture can be performed quite successfully. For the manufacture of the bench, the board is required 2 - 2, 5 cm thick and a width of about 20 cm.
Bani or vegetable benches make easy
According to the drawing in Fig. 1. You need to cut the following parts:
Spin the corners on one side of each point of the apron, as shown in the diagram. Measure from the edges of the element for the legs of 2 - 2, 5 cm on each side at the top, cut the groove with a length of 10 cm. If desired, cut the holes for the pens on the seat of the bench. About how to make a shop with your own hands, look at this useful video:
Product assembly to produce in the following sequence:
Processing the surface of the product with a large sandpaper to remove burstages. If necessary, paint the bench to your taste.
Another simplest project is presented in Fig. 2. For the manufacture of a bench with a backrest, it will take 2 log cuts about 25 cm long, backrest and seating boards and 5x5 cm bars for backrest racks. If you want the seat to be slightly higher, you can take 4 log segments or timber and lay them on each other, tumping the wrenches.
The back is screwed by self-drawing from the reverse side.
The manufacture of the bench is very simple. So that there were no nuts and heads from nails on the surface of the product, to produce parts and glue. The back can be screwed with screws from the wrong side so that they do not drill the board through.
For the manufacture of the wrenches, wooden rounded rods are needed (a thin handle for garden tool is suitable). In the log, drill 2 holes with a diameter of equal dummy thickness. Focusing on their location, make response recesses on the bottom of the seating. Work must be done very carefully so that when assembling it has not been to customize parts of the bench. For more information about making a bench with a back, see this video:
Lubricate glue a piece of wood for the wanking and insert it into the hole on the log so that a small fragment remains outside. Its length should be equal to the depth of the removal drilled in the seat (Fig. 3). Lubricate the woven with joinery glue and put on them the board. Make the same thing with another log segment.
Cut the bars of the desired length for the manufacture of backrest racks. Screw to self-testers to the ends of the logs. In the upper part, drill 2 holes for fastening the back. The distance between the holes should be less than the width of the board. Screw the screws through the holes in the table. The finished bench can be painted or covered with transparent varnish.
Make garden furniture on the proposed project is quite simple. The basis of the design is the plates of porcelain booking or concrete and a thickness of 2 - 2.5 cm thick. If you wish, you can replace the same thickness with light plywood. Wooden bench with a back, will be mobile.
Stylish bench is distinguished by an interesting back.
The following details will be required:
Phaneur will have to be pre-cut into fragments of the required shape and the magnitude. If boards and stoves are used, then this step can be skipped. On how to make the original shop do it yourself, see this video:
Drill 2 holes equal to the edges of the distance at the top of the square parts of the legs. Customizing the long details of the seating as in the diagram (Fig. 4), make 2 holes in them on each side. One end of each rod turn the nut and put on the puck. Alternate long and square elements, assemble a bench. Split nuts on the other side of the stud.
Such a bench can be used without back.
But for convenience you can do it. For this, 4 boards of 15 x 65 cm secure on the screws from the rear of the rear of the bench. In between them, incur or plant the crossbars on the shelves.
The raw tree is a wonderful material for garden furniture. The shop, similar to the Throne of the Forest King, fits perfectly into the landscape imitating wildlife. It is very appropriate to such seats near rocaries or old trees with a spreaded crown in the preceded corner of the garden. Rustic benches with trimmed wild stamps for picnics or mangals from sandstone and boulders are well combined. Original shop in this video:
The easiest option of the seating from the logs is a monastic bench. For its manufacture, the unprocessed log needs to cut in half along. From short segments make legs, laying them with a drink on the ground. Long halves of logs fix on the shelters from above, spil up. To make a bench not a dirty clothes, it is better to choose hardwood logs and dry them well before assembling furniture.
To remove the offering and sowing, the plane of the sleeve is necessary to smoothly handle the plane and process the sandpaper.
The complicated version of such furniture is a bench made of logs, with your own hands supplemented with a back (Fig. 5) to attach the back, we need wooden or metal supports and crossbar. These details can be made of thick wood branches, bar, steel strips. The mount is produced on a screw of sufficient length or on nails.
Examples of original benches of wood
The logo from the logs can be made and otherwise (Fig. 6). On the photo, the grooves are clearly visible in the upper part of the thick log painted in half. In the grooves you need to insert a board with a thickness of at least 4 cm or a beautiful sawing of the tree trunk. If desired, the exclusive piece of furniture made by your own hands can be supplemented with a back. Supports for her need to attach to the inside of the legs on smooth surface. The crossbar can serve a thick branch or the same spoke of wood, as well as for seating.
The set of tables and benches will be convenient at the dacha in the dining area or near the mangala (Fig. 7). Make this easy, if you know the main techniques for the manufacture of wooden log cabins. To begin with, 2 are approximately the same in the thickness of the log. A axes need to push semicircular recesses (bowls) at the ends of the logs. The size of the cup will depend on the diameter of the log, which is selected for the seats. This trunk needs to be cut along. Example of chopped furniture in this video:
In the middle of 2 lower logs, it is necessary to outstretten 1 cup to install a transverse support. It may not be a very thick log. Its length should be such that the ends are given by the side surfaces of the trunks.
For the base of the table, you need logs shorter. Their length is approximately equal to the desired collar width.
In the middle of each trunk, it is necessary to extrude the excavations suitable in size to the thickness of the cross. Put the cuts of the cut with cups down, covering them the transverse log. From the boards to make a tabletop and consolidate it with nails. To put on the souls intended for them.
This is the most creative occupation. Finding in the forest or on the shore of the reservoir beautiful snags and polished fins, you can make furniture of amazing beauty (Fig. 8). Each such a bench is unique, because it is difficult to find 2 identical branches. Therefore, solutions options, how to make a bench from Korjigi, may be a lot.
The main thing for all such products is one thing - the fitting of the parts is performed right on the place under the already finished legs, seats, backs. Branches should be harmoniously intertwined, forming a design that will endure the weight of an adult. Self-tapes and nails can be used to connect non-standard parts. The most reliable is the connection to the sewage and glue. Where it is desirable for a dense fit of pieces of construction, squigs can be pushed with an ax.
The most original benches can be made of branches and fins.
Such decorative benches can be used even to decorate the premises in the style of Chalet or Rustic. They are wonderful combined with a wild stone finish. Harmonious they will look in the garden among flowering bushes or near the reservoir.
A variety of bellows models that can be made with their own trees, endlessly.
The main thing in the manufacture of wood furniture is the thoroughness of fitting parts.
Then the finished product will be neat, without distortion. Processed by moisture-proof impregnations and varnished or paint, any seat in the garden will last for many years.
