Garage near the house with a facing block house
Have you decided to build a house for your car, but are constrained in the means, how to be that the garage is spacious, good-free, and finally enough? In the article we will tell, from which material it is cheaper to build a garage, as well as the advantages and disadvantages of each species.
Building consists of the following constructs:
We will analyze every item separately, we will try to pick up for each constructive most economical view material.
Under the garage usually ribbon base (see).
Make it from several types of material:
The advantages of such a foundation in the speed of installation, strength and reliability. Of these, you can also lay out the basement in the garage or the observation pit. But the price of the blocks is quite high to bring them and mount, you will have to hire expensive techniques, specialists in working with a crane and installation of reinforced concrete.
This option is good in the case when there are blocks that used, a friend works on the crane and is ready to help for a symbolic fee, and the owner of the construction has the skill and experience of assembly work.
In this case, it will be spent only on cement and sandy-gravel mixture, for formwork use any suitable material: Used boards, shields, fane, metal sheets, that is, everything that may be at hand. For reinforcement, it is also possible to find the former fittings, mesh or any metal profile, saches or trimming, which bind among themselves into a single design.
It is possible to make a concrete mixture manually or with a small (by 0.5 m3) of a solution, which will certainly have someone from the neighbors of a garage or friends. Of course, this option will take some time and strength, but, as they say, "is not considered" his work, "if you need to save on materials and work.
For the manufacture of such a foundation, some experience and knowledge of brick masonryAnd hiring a specialist will cost a lot. In addition, the surface of blocks or brick will require mandatory multilayer waterproofing from the penetration of moisture and protection of material from destruction.
So, based on the foregoing, we conclude that the most profitable foundation for the garage is "tape" from a concrete mix, made and filled with your own hands.
The garage refers to easy buildings, and this constructive is experiencing minor loads - roofing and atmospheric precipitates, so there are no powerful, thick walls here.
If the garage is adjacent to the house, you can save on one wall, the main thing is to correctly perform the butt of two buildings. We will not develop this topic here, the instruction on the docking of the garage with the house is on any construction site.
We will tell about inexpensive materials from which you can build the walls:
| The size of the structure (cottage, garage, baths, etc.) | ||
| Perimeter of walls, m | ||
| Wall height, m | ||
| Windows and doors | ||
| Entrance door, pcs. | ||
| Door width, m | ||
| Door height, m | ||
| Window, number pcs. | ||
| Width of one window, m | ||
| The height of one window, m | ||
| Choose Building Material and Masonry | ||
| Type of material Ceramzit concrete blocks, masonry in 0.5 block, wall 20 cm. Ceramzite concrete blocks, masonry in 1 block, wall 40 cm. Clasp blocks, masonry in 0.5 block, wall 20 cm. Clamps, masonry in 1 block, wall 40 cm. Brick cladding, thickness 0.5 bricks or 12 cm. Facing of a thickened brick, wall thickness 0.5 bricks |
||
So, now you know how many ceramzitoblocks or slag blocks are necessary for your structure. Now with the help of simple calculations on a conventional electronic calculator, you can find out the total amount of money for all the blocks necessary for the cottage or garage.
But these materials are very hygroscopic, so you have to sow a garage outside to protect against atmospheric influence, which will require additional costs.
Self-sufficient material that does not require additional cladding, the construction of it is durable, durable and reliable, plus is also a small weight and compactness of the material, but the construction takes a certain time, perhaps longer than I would like. In addition, the cost of brick, probably the highest to others, and the construction will require the skill and special skills.
Thanks to the dimensions of the material, the construction time is reduced, the construction will be pasted light, warm, durable, the cost of blocks is available, the transportation will not be difficult. In addition, the mass of walls from foam blocks does not require a powerful basis, in this case it can be saved a little on the foundation.
From sheet steel maybe if the owner has skills welding work, or is it possible to hire a specialist. Frame garage With the shearing metal will cost cheaper than brick or foam block.
Disadvantage metal garage It is high thermal conductivity, in other words, in it in winter it will be very cold, the walls will require insulation or installation of a heating device. If this factor does not matter, then best Material For the construction of the garage - sheet steel.
Walls from the railway panels are quickly mounted, work is possible to finish the day. Plates or buy (used former in use, but without visible defects), or poured on their own. In this case, you will have to spend money on cement and sandy-gravel mixture), concrete is prepared with a small concrete mixer.
The garage from the precast concrete is durable, durable, with some insulation it will be comfortable in any weather. Although the installation will require the use of the crane or manipulator, but if you effectively work, you can significantly save on payment.
A frame construction from a tree will cost a completely inexpensive, but the high fire hazard of such a construction makes you think about the need to build a garage from this material.
Definitely answer the question, from which material it is better to build a garage, and in particular the walls, not easy. All offered materials can be purchased at an affordable price, they are great for the construction of the construction, it all depends on your capabilities.
Important! If you are familiar with the work of the bricklayer, then the garage of the brick or foam concrete is what you need. If you have a familiar craneker, then it's easier to fill and mount the wall panels. And the ability to hire a welder or ability to keep the electrode will help you make a metal garage walls.
It can be two types: Single and dual-batch, about a more complex and expensive configuration we will not speak, as our question is in the construction of a garage with minimal costs.
The overlap is made of hollow or bars plates, the ceiling is behed with a board or plywood. For rafters take a board at least 40 mm thick, for the crate - a 25-30 mm board (in order to save it, you can use the unedged, but you will have to remove the conversion, and then the wood quickly rotates).
Such a roof will help solve the issue with insulation, the floor in the attic can be covered with a slag, which is the most inexpensive and affordable insulation material. Roofing material for duscal roof A professional security officer or ordinary asbotic slate, proven over the years, inexpensive, practical and durable material can be served.
For overlapping, take the railway plates, which are placed directly on the walls with a slight bias for the drain and snow water. Here the overlap serves simultaneously and the roof. Joints are boosted with solution or fill mounting foamThe cement screed with a thickness of 50 mm is suitable on the surface for alignment.
Roofing materials for garage with single Roof Usually apply rolled, prescribed, although from the savings you can buy a runneroid, but it is rather short-lived material, which is prone to rapid destruction, cracking and so on. It is better not to save and buy more modern consolidated materials, for example, Teknonikol.
So, if you choose from these two types of roof, it is clear that the single-room will cost 10-15% cheaper.
The most cost-effective metallic swing gates will be most cost, they are reliable, strong and perfectly perform the necessary protective functions. They are enough to paint with 2 times paint for metal for outdoor work.
Depending on which the garage is built from which material, internal and outer decoration depends. Usually no one is sophisticated, separating the garage, but still the most needed does not hurt.
To find out for yourself, from which to build a garage with the lowest costs, it is necessary to pre-conduct building materials for the garage, starting with the foundation and ending with the roof and finish, and then choose the most affordable materials.
Important! The estimate needs to include the cost of designing the construction in the relevant instances.
We hope that the thematic photos and video provided by us will help you in solving this issue.
Garage - the necessary acquisition for each car owner. It allows you to leave the car in the parking lot in optimal conditions, Provides protection against the negative impacts of the most different kind, allows maintenance and repair in comfortable and convenient conditions. Just leaving the car in the garage, you may not worry that it can sobally, spoil, open and steal valuable things, etc. No. No one will argue with what to have a garage is convenient, practical and pleasant. But buy a garage in modern economic conditions Not all car owners may not.
In such a situation, you can try to build a garage yourself. But not all materials and types of construction provide truly significant savings. Capital construction in any case will cost weekly, as the materials themselves and the technologies used require significant investments. But among modern building materials and affordable technologies, you can choose those that will make the construction of an inexpensive and practical garage possible. Many craftsmen have already enjoyed such buildings for more than one year. In this article we will tell you how to build a garage of cheap and quickly with their own hands, what materials for this choose and which technology will take advantage. Choose what is suitable for you, and build a modern and inexpensive garage for your car!
The widest range of a modern building market allows you to choose the optimal type of materials for any type of construction. You can choose both among traditional options, such as brick or wood, and among relatively new proposals, for example, professional flooring, sip-panels, etc. We invite you to consider the materials that are best suitable for the construction of an inexpensive, aesthetic and practical garage.
The first thing comes to mind when it comes to the material for the construction of a garage is brick. Indeed, most often the capital garages are based on exactly this material. Of course, the properties of this material at the height: it is durable and beautiful, reliable and durable, allows you to create high-quality decent buildings. But to afford brick garage May not all, as its construction costs a decent amount. And the construction itself takes a lot of time. So if you want to build a garage quickly and without extra cost, then pay attention to more affordable materials:
These materials can be called the most suitable for independent budget construction of the garage. Next, we will tell about how to build a garage of cheap and quickly with their own hands, video instructions will help you understand the basic principles of working with each of these materials.
Choosing a tree as the main material for the construction of the garage, you make a choice in favor of aesthetic appearance, absolute security for humans and the environment, reasonable cost, ease of processing and application. Beautiful garages are obtained from wood, but, planning such construction, you should know about special nuances that are different with wood.
For the construction of the garage, two are optimal modern technologies Construction of wood. In the first case, an affordable rounded log is used, and the framework is used in the second. Buildings from rounded logs are distinguished by a high degree of reliability. They are strong and beautiful. But the construction of the frame technology - more accessible by price. In this situation, you need to relate your preferences, goals and objectives with characteristics and features of this or that technology. It will help you choose the best waySuitable for you.
Construction work always begin with the preparatory stage. It is very important to analyze your capabilities and requirements, competently choose a place for construction, consider the project of the future building. And it is also necessary to decide whether your garage will stand separately or will be attached to the house, it will be in it looking Yama, cellar and other elements. And also immediately need to decide with the type of gate and think over all other aspects to the smallest detail. This is necessary that in the future work carried out on a clearly thought out plan quickly and efficiently.
When you make a project and think over the work of work, you must prepare the selected area for construction work. It needs to be aligned and seal the soil. The smoothness of the site affects the quality of the future structure.
On the prepared area, a solid and high-quality base for the garage is created. You will need to prepare trenches around the perimeter of the planned building, form a formwork, fall asleep and tackle a pillow of gravel and sand.
The most important stage is the strengthening of the base. For this purpose, metal rods are used, which are stacked over a sandy-gravel pillow. After that, the base can be poured with a solution. The foundation is gaining strength about three weeks. After this period, you can move to the performance of other works. The first thing to be built is the lower reinforcing belt from the bar of 50x100 mm.
Keep in mind that unprocessed wood does not have protection against moisture, fungus and pests. Therefore, before construction, all wooden elements must be treated with antiseptic compositions.
For the framework of the framework, you will need a bar, which is more convenient to make the racks and goal sash, as well as 50x100 mm boards suitable for all other parts of the building. By lower strapping The step should be no more than 120 cm.
Additionally strengthen and strengthen the design will help the corner pumps that will sign the strapping. As a result, the base of the construction will turn out to be durable, sustainable, reliable. It is important from the very beginning to carry out all the work as precisely as possible, since mistakes at the initial stages will certainly be felt later.
In the construction technology, the most costly and complex stages are the foundation and creation of the framework. The frame requires both better material, and more time and maximum accuracy. And you can make the trim even from the usual board or lining. It will not take much time and will not require any special skills from you. The decoration of the wooden garage can be performed and using almost any materials. Do not forget about the need for high-quality exercise of hydro and vaporizolation. To do this, you can use a polypropylene or polyethylene film.
There is nothing complicated in the construction of a wooden garage. You will need some patience and initial knowledge in the field of construction.
Garages from slagoblocks today are quite common. If you decide to build such a garage, then you need to know that the slag blocks are different:
Sometimes slag blocks are made with the addition of polystyrene, perlite and other components that can improve operational properties of this material.
For the construction of the garage, the slag blocks could be called a beautiful material if it were not for one drawback - absorbing moisture. Because of the penetration of water into the material, it quickly destroys and loses its properties. Therefore, it is best to choose slag blocks for construction on dry ground. In such conditions, the construction of slag blocks can serve up to 50 years, while maintaining their properties. If there are groundwater on the territory of the future construction, then it is better to refuse from the use of slag blocks, since there is no processing or other reliable way to prevent water penetration.
Do not forget to also take into account the classification of configuration slag blocks. They are full and hollow. The first form is intended for the construction of walls. The second can be used for the foundation device. If you use no intended blocks, then your building can turn out poor quality and unreliable.
Just as in the case of the construction of a wooden garage, construction from slagoblocks begins with the preparation: the territory is cleared, aligned, it is rambling, and a project and a detailed work plan are being developed.
Wooden building requires the device of the filling foundation, while the slag blocks do not need such a solid base. For a garage from slagoblocks, the optimal option will be. For its device, it is necessary to remove the upper layers of the Earth and prepare the trench. Its depth should reach 50 cm, and the width is 45 cm. After that, at the bottom of the trench, the layer of sand is laid out and broken bricks. After that, the foundation is poured with a solution.
There is another way of a tape base device. After preparation of the trench, it is laid out by a layer of moistened sand. This layer makes the base with a stronger and resistant to temperature differences, moisture and other negative impacts. Then performs the strengthening of the design and its fill.
For a set of fortress, a tape base requires about a month. After that, you can move to the construction of walls. But there is another way to make a ribbon foundation. This is the most simple technology that is characterized in that instead of sand, the trench is laid out with a boob stone and immediately after that poured with a solution, the brand is 150 m above.
When the basis is ready, it is necessary to put hydro and vapor insulation materials. The optimal choice for solving this task is the runner, affordable and tested material.
After that, the work is carried out in the following order:
Locked slag blocks are needed by the same principle as the brick. But in this case, the work will be carried out much faster and easier. There are two types of masonry - a spoonful method, in a shemna, and a twitch method, in one stone. Use masonry in two and a half of the stone. You should navigate your own skills and opportunities, choosing one or another type of masonry. Do not forget that the facilities of the masonry are reflected on the characteristics of the finished structure, on its strength, resistance to negative factors, durability. For example, the garage erected into one stone low temperaturesah will freeze, even if heated it from the inside by several heaters. And the design laid in a half of the stone, it turns out to be sufficiently warm and comfortable.
Laying walls starts with corners. After that, BECHEVA is tensioning between them, and the laying continues at its level.
Finish works in the construction of a garage from slag blocks are the necessary communications and the decoration of the construction from the inside.
Professional flooring is a practical universal material. Fences and various economic buildings often erected from it. Garages made of professional flooring are durable and reliable, have a pleasant appearance and good characteristics. But, planning the construction of garages from the corrugation, it is important to correctly choose the material. Want to build an inexpensive, but reliable garage? Then choose a professional flooring, brand C or PS.
In order to make right choiceIt is necessary to deal with material marking. It is performed by the letter and digital designation. The material marked with the letter "C" is designed for the walls. The figure indicated on the material indicates its rigidity. The greater the digit, the higher the stiffness of the sheet. For the construction of the garage, we recommend that you dwell on the material, a marked "C-20".
Some sellers can recommend that you replace C-20 on C-10 or C-8. We do not advise you to make such a choice, because the garage made from this material will be cheaper, but will be short-lived and unreliable. In winter, thin sheets are quickly wrapped, and it will be quite difficult to warm them. And also this material is poorly coping with wind loads. All this inappropriate properties for good garage. Therefore, for the construction you need to take only twenty. As for the sheet thickness, the optimal choice is 0.5 mm.
Construction Features Garage from Profile
To build such a garage, you need to purchase:
As for the instrument, it will be necessary to build from the professional flooring:
The first stage of work on the construction of a garage from a professional flooring is a foundation device. For such a building better decision will do monolithic base. To do this, the upper layers of the Earth are eliminated. In the resulting pit, moisturized sand falls asleep. For frame racks, special wells must be provided, which will also play the role of the foundation racks. Wells should be driven into the ground to the depth of half a meter.
Thanks to these elements, the foundation will turn out to be stronger and durable. It will cope well with the movements of the soil.
After that, the work is carried out according to the standard scheme. A formwork is installed on the perimeter of the recovery, reinforcing rods, connected with a wire. After that, the frame racks are installed in the prepared wells.
Before this, the lower parts of the racks are processed by bitumen to prevent moisture penetration and reduce other harmful effects.
In the process of installing racks, it is necessary to carefully monitor their level. They should stand strictly vertically. It must be regularly verified by the construction level. After installing the racks, the base is poured with concrete M300. For the construction of a garage from a professional flooring, such a choice will be optimal.
It is recommended to give the foundation to gain strength for three weeks. Although some masters believe that go to further work You can already in a couple of days after the fill of the base. But such a hurry can lead to the cracking of the foundation, which will completely lead it out of order. So it is better not to hurry and wait for the laid time, so as not to minimize every effort.
After the foundation gain strength, you can mount a metal frame. First you need to prepare pipes in size corresponding to the project. You can cut them with a grinder, an electrolovka, to connect - welding. If you have previously had experience working with welding, then for the installation of the frame you will need less than three days. If you are only developing this equipment, you can assemble the frame for the week. Be sure to check the size of the material with the project to avoid annoying errors.
Horizontal elements are welded to the installed racks. Welding is carried out in three points. If you are planning to make wooden frame, To the racks you need to prige special mounts. Broxes are bonded by self-draws among themselves.
Profile sheets are also attached to self-tapping screws with a special rubber gasket. Cut the material with an electric bison. For this stage of work, it is desirable to enlist the help of two-three people. The command to carry out the trim is much easier.
After assembling the frame, you need to think about the installation of the gate. This part of construction is very important, since any inaccuracy can lead to the fact that the garage doors simply will not open. It is possible to weld the gate frame from metal corners, and how to use sheets of professional flooring as a sheat.
The optimal version of the roof for an inexpensive garage is a single one. The framework of the frame will serve the crossbar of the tree or metal, and the lining will come for the roaring. When choosing the roof materials, do not forget to take into account the climate of your region. For southern places, you can apply a lung hoist. For colder areas, it is necessary to give the creation of a roof closer attention, because it must be designed for strong wind, precipitation, snow, etc.
Now you have an idea of \u200b\u200bhow quickly and inexpensively build a garage. Choose the appropriate option and proceed! We wish you good luck!
Simple garage with your own hands can be built from professional flooring. This is one of the most common budget building materials, from it they make roof, gate, fences, kiosks, household buildings and, of course, garages.
The profiled sheet is made of steel by the method of cold rolled, while it is given a trapezoidal form that increases the stiffness of the material. For protection profile The corrosion uses a zinc coating, and to give a certain color - polymer film.
The profiled sheet is distinguished by a small mass, ease of work and a long service life, up to half a century. In addition, today you can find a professional flooring of any color, which allows you to choose a garage color, combined with your home and other buildings.
But this material has and limitations: Professor does not keep warm and does not keep warm and does not provide reliable protection against intruders, and any sufficiently strong blow to him leaves dent.
To build a garage optimally use profiled sheet brand C21..
The thickness of the wall from such a material can be from 0.4 to 0.8 mm, the cost of 1 m2 of the proflist C21. Lies within 250-400 rubles (As of the summer of 2016).
What to build a garage cheap? Another option for the construction of a cheap garage is wood.
From it you can do both sufficiently light designs from the bar and massive and solid logs of logs.
How the material tree stands out environmental purity, attractive appearance and high noise insulation. But at the same time, many questions cause durability of buildings from it - and the bar and logs require protection against insects, bacteria, mold, fungus and dampness.
In addition, a tree good burningwhat makes it not the best choice To build, where the car, gasoline and other flammable materials will be located. The value of the material will be much varied depending on the region - where the forest is developed, the tree will cost not so much.
You can still build an inexpensive garage from? Probably everyone saw garages from steel sheets - Such buildings are sufficiently common in garage cooperatives, and even more there were 15-20 years ago. From metal, you can make both frame and solid structures collected from the steel cooked with each other.
The main advantage of this material is speed montaja and dismantleTherefore, it is worth paying attention to the inhabitants of large cities, since in the case of moving, move the garage to a new place will be possible in just one day.
In addition, the cost of such a building will not burden your wallet - one square meter of a steel sheet with a thickness of 0.8 mm worth 250-350 rubles.
What concerns disadvantages Metal, the main enemies of the garage owner from steel will be rust, cold and heat - without proper protection against corrosion, the construction of this material will last long, and without insulation, it will be uncomfortable in it in winter and in summer.
What to build a warm garage cheap? Alternative to all these building materials recently become slag-, foam and gas blocks that gain their popularity for the last couple of decades. Being materials with a porous structureBuilding blocks have good noise and thermal insulation, as well as low weight.
The last property heshes them and simplifies the process of the construction of the garage. It is worth mentioning a relatively low shrinkage of such materials, fire resistance and low cost. For example, slag blocks with a size of 390x188x190 mm cost about 35 rubles a piece. By the way, since the dimensions were mentioned, the optimal thickness of garage walls from construction blocks is considered to be the thickness of "in the floor block", or 190-200 mm.
The general disadvantage of these materials is the tendency to absorb moistureTherefore, any construction of slag blocks, gas-blocks or foam blocks requires good external and interior decoration, insulation and waterproofing.
What can make a garage cheaper? Another candidate for the role of inexpensive building materials for the budget garage is polycarbonateFrom which you can make buildings and canopies of various shapes and colors.
It is easy, flexible, has good thermal insulation, not subject to corrosion and dampness, but at the same time polycarbonate It is quickly scratched and that the main thing is strongly expanding and narrows when exposed to high and low temperatures. A simple garage (canopy) will protect your car from rain and snow, but for capital construction it is not too suited.
As for concrete and brick, you will not build a cheap garage from such materials. It is necessary for them, the arrangement of which is expensive (and for working with concrete still need construction equipment, which increases the price even more).
In addition, one slagoblock in volume is able to replace six bricks (which makes it already twice as much more economical than equal in volume the amount of cheapest silicate bricks), and it is uncounted twice the best on average heat insulation Building blocks.
Cheap garage: How to build? Watch in the photo Some options: 
We sorted out what is better to build a garage cheaply. Now let's talk about roof. The roof of the garage can be flat, single and double. The first option is the easiest way performed, the two subsequent more complicated, but also look better and, moreover, ensure the flow of water from the roof to the ground.
As for the roof material, the main requirement for it is reliable waterproofing, Roofing should not pass inside the rain and snow. In addition, it must be long enough, have good thermal insulation and, it is desirable to look beautiful.
Of those already mentioned in the previous section of the roof materials, polycarbonate and profiled sheet are suitable. The most cheap options will be ruberoid and ordinary slateBut it is difficult to call them a beautiful roofing material.
More expensive, but at the same time and a more durable alternative are metal tiles and cement-sand tiles. In addition, they will give your garage an attractive appearance, and their color can be chosen "under the color" at home.
What makes the garage cheap? Summarize and find out what is the most cheap Material For the construction of the garage. If we are talking about a temporary construction, then goes forward polycarbonate With cost from 130 to 350 rubles per square meter. A little behind him - steel sheets.
Among the materials for the construction of capital buildings will be the leader slagoblock. The cost of the square meter of the masonry of them will be 400-500 rubles without taking into account the costs of cement mortar. Intermediate option serves professor - In terms of cost, it is like steel sheets, but it is also suitable for temporary and for the capital garage.
It should be remembered that in addition to the value of the material itself, you need to take into account the price foundation, the need to purchase either rental of expensive equipment and tools and what time internal and exterior finish the buildings. Now you know where to build a garage cheap and we hope that our article helped you choose the most inexpensive building materials For garage.
No matter how good and reliable car is not, but in order for it to serve for a long time you need a room that protects the technique from temperature drops, from humidity, from destructive wind and sunlight. Therefore, when choosing a material, from which you can build a garage, you need to rely on the principles such as the weather conditions of your climatic zone, the materials that will be used, protection - alarm, locks, gates.
The garage in the country can perform different functions. For example, interesting solution For Hozblock
In addition to the direct function of "storage" of the car, the garage makes it possible to equip the workshop. It can be equipped observation pit Making your hangar for the car even more convenient. There is also often a cellar, another storage room for storing self-catering or a rest room. About projects of houses in the style of minimalism and functionalism, read.
A very large plus garage is that it is more profitable, which is more profitable than the payment of the same place in the parking lot. That is why the owners of country houses or cottages are always included in the plan of buildings this type of household building.
The first with which you need to decide the building garage is your financial capabilities. That is, the amount you can and want to spend on the construction. Choosing a brick building, you choose:
It is important to understand that to build a garage from brick is not so simple, you need to have elementary concepts how to build walls.
It is also necessary to decide how often you will use this building for what. If you are planning there only to store the car, you can build a cold garage, that is, not to build thick walls and do not insulate them. And if you want to arrange except shelter for a car convenient workshop, think about protection against temperature drops.
For detached garages on dumart sites It is best to erect walls not thinner 250 mm. and overlap panels.
Modern material that gradually displaces the usual brick. Among the advantages of this material:
The large size of aerated concrete blocks allows the walls very quickly. But, so before overlapping the roof panels need the last row to strengthen reinforced belt, about ten centimeters width.
Another advantage of gas-foam blocks is that exterior walls Practically do not need finish. Such a seams welt acrylic lubricant to protect the construction from dampness. This is possible because the aerated concrete blocks of the structures of the closed cycle, which will be removed from moisture inwards.
The video tells how to build a cheap garage from foam block:
Wooden garage - unusual, but stylish
Twenty years ago wooden materials For the construction of garages were prohibited, as they were recognized as fire hazardous. Yes it is. But modern anti-view impregnations and varnishes make these materials refractory and persistent.
The advantages of buildings from logs and timber:
Especially good shelter and agnar for cars from a otsiclated bar are suitable for country cottages in eco-style. Inappropriate will be similar design of logs in a pair with a modern structure of concrete and glass. What are the projects of garages, baths, summer cuisine, specified in detail by.
Moreover, wooden garage perfectly retains heat, so such a building is perfect solution For those who are going to also equip a workshop here or a rest room.
On the video - how much does the garage cost:
Saintwich panels allow you to very quickly build any build
On this technology, cold, non-heated shelters for cars are erected. But in order to fasten the walls of the construction, you need to choose a step of construct base supports equal to the width or length of a solid compatible plate (50 or 100 cm). In this case, the insulation gently and accurately rely on his place. The second step is to sew to protect against Valva with any sheet material. For example, flat asbetic sheets, cement-chipstop, OSP treated with antipiren wooden clapboard or galvanized steel.
The multilayer panels are divided into two types: a classic sandwich from the steel professional flooring with the Military, foam or polyurethane foam insulation and designs from OSB sheets with foam.
You can purchase a ready-made "designer" for self-assembly (Metal frame, panel, gate, good items and fasteners). The one who does not want to take the welding machine and the screwdriver can immediately order installation immediately when buying.
During the construction of its own hands, the cost of construction from the sandwich panels is comparable to the price of the foam block. The time for its construction will be required for 3-4 days less, since not only the walls, but also the roof is collected from multilayer panels and does not require insulation.
Advantages of sandwich panels
Important moments on which the quality of the design of the sandwich panel depends is the accuracy of the fill the concrete base and the frame assembly. If these works are performed correctly, the installation of walls and roof takes no more than a day. About the extension of foam blocks to wooden house Read.
Easy project from sandwich panels
For the car, a separate room is necessary, where the car will be safe from the kidnappers and weather conditions. Build a garage can be from different materialsFrom whose choice will depend on the cost of the design and time for its construction. The project is selected taking into account your own budget and skills. construction work. To decide how to build a garage cheap and quickly, consider the available materials and simple designs.
Building technology divides garages into two main types: capital and lungs. Ground structures have a durable solid foundation and stone walls. Light structures are performed on a tape or slab base, and the material for them is a profile and a sandwich panel.
Fast and inexpensive garage construction for a car is performed from a slag block or foam block. The last material is relatively easy and inexpensive, and thanks to essential dimensions, the construction process is accelerated. The garage of foam block is easy to build with their own hands. For the base on the bunchedness, it is worth using a monolithic plate, and normal soil allows you to make a non-soft tape base device.
Laying blocks is performed on a special glue or a solution of sand and cement. Prior to the start of the walls, a metal frame for the gate is installed. Laying blocks begins with angle, and is executed forward. The masonry requires the device for reinforcing belts. Due to the hygroscopicity of the material, the garage requires an external finish. The walls are plastered, covered with facade paint or use siding. The roof is made by a single-sided or double, for rafters, bars and boards are taken, roofing Serves slate or professional flooring. In the garage you need ventilation, for profitability you can use natural system. On opposite walls, two holes are performed - one below, the second above. The dampers will allow you to control the air flow.
More recently, the lungs and quick-scale buildings consisted of a frame and smooth steel sheets. Now professional flooring is used to cover the garage. The material is not inferior by siding characteristics, but has affordable price. You can use the construction up to 40 years. The large area of \u200b\u200bsheets and the simple process of their attachment by self-drawing to the frame occurs quickly and does not require professional knowledge.
When laying the base under the garage, metal pipes for the frame are attached. A ribbon foundation is performed if the observation pit is planned, it turns out and concreted at the same stage. The remaining details of the design are attached to the closed pipes. If you do not know how to use the welding machine, then the bolted connection is used. The step of vertical racks depends on the operating conditions if insulation is planned, it must correspond to the width of the mineral wool strip. If the minvat is purchased in wide rolls, they are cut in half.
Wall profile sheets are attached vertically self-taverns with rubber gasket. The roof is made of duplex and covered in a professional flooring. Sheets are placed with the overlap at least 20 cm, the joints are smeared by sealant. The mount is performed consistently into each wave. The edges of the coating should hang 40 cm so that water does not flow through the walls. Before insulation of the room, all the cracks are blended by mounting foam, then the insulation is placed on the walls and the ceiling. Mineral wool Closed by plywood or other wood-based plates. The floor is poured by a concrete tie. As a result, in a few days you have a cheap garage. .
The use of the panel sandwich allows you to create a design ready for use, additional external and interior decoration. The panel consists of two layers of metal separated by insulation. For the garage it is enough to perform a ribbon foundation, and pour floors concrete screed. You can build on concrete base, then under finish coating The solution is laid by a grid of reinforcement with a diameter of 8 mm.
Walls are harvested from a metal profile, diagonal elements are performed for rigidity. Additional edges are placed at a distance of 50 cm. The side and rear wall are collected according to the scheme, the front is planned for the gate. To install the roof, a larger profile is needed to power the high load. The finished frame is connected by a special fastener. The first set sandwich panels for walls are installed, they are fastened with a lock connection, but it is worth losing it with a sealant. After plating walls, the panels are placed on the roof.
You can make a garage without investing a substantial amount, any of the presented methods is presented to the video.
This video about the construction of a metal garage. You will see how the metal structured for one and a half days collected:
