House, design, repair, decor. Yard and garden. Do it yourself

House, design, repair, decor. Yard and garden. Do it yourself

» Bear from plastic bottles for garden. Masha and Bear from plastic bottles and mounting foam

Bear from plastic bottles for garden. Masha and Bear from plastic bottles and mounting foam

When a few appeared in the house plastic bottles, you should not hurry and send them to trash. Of these, you can make it easier for cute and interesting animals and birds. Such crafts will be perfectly looking in the territory kindergarten, playground or just in the country area. In this article, we consider in detail how animals are created from plastic bottles.

We start with training

To create animals with your own hands, you must first prepare everything necessary materials and tools. Below is a set of most frequently used materials. However, according to the selected animal, items of this list may disappear or add:

  1. Plastic bottles, possible volumes: 0.5 l, 1.5 l, 2 l, 5 l and 6 l;
  2. Scissors;
  3. Paint and varnish;
  4. Wire;
  5. Bandages;
  6. Putty;
  7. Glue;
  8. Decorative details: Buttons, beads and so on.

Create perhaps any animal in the soul: hare, bear, frog, swan and so on. What kind of animal did not stop the choice, the snaps will come out unusual and cute, and also perfectly suitable for the garden.

Methods for creating a body of the animal is practically no different in different animals. And the methods of creating wings, ears and tails makes it possible to demonstrate ingenuity, they can be done both by memory and in the textbook with an animal description, depending on the complexity of the beast you have chosen.

The volume of bottles is chosen based on the desired size of the finished animal. For large products, we take a bottle of five and six liters, and for small up to two liters.

Cute piglery

In order to make a pretty piglet, you will need to prepare:

  1. Plastic bottles of five liters;
  2. Acrylic paint;
  3. Scissors;
  4. Sponge for dishes;
  5. Marker.

Article on the topic: Plaid crochet motifs with wildflowers

First we take a bottle and remove all unnecessary details from it, such as rims and handles.

Now we plan a marker and cut out the oblong hole almost from the bottom to the throat, and above it with back side, Make another wider hole. Mastery crafts for a piglet ears and tail.

Now you need to paint our animal in any favorite color. Pray in two or three layers, and when the paint is driving, it is necessary to cover the product with varnish. Such a pig can be very useful in the garden and used as a flower cultivation flower bed.

Making a hare

This hare is very easy and fast. For work it will be necessary:

  1. A bottle of five liters;
  2. Bottle of one and a half or two liters;
  3. Marker;
  4. Scissors;
  5. Master Class.

First, we draw the bold ears on a bottle of smaller volume and cut them on the outlined circuit. At the bottom of the ears it is necessary to leave a small piece of plastic for the future attachment to the head of the animal. Now we break up the big bottle of holes, which will later be inserted by the ears.

It's time to start painting. First we take a large bottle and paint it as a bunny. Gray body with white tummy, paws, black eyes, mouth and so on. Now separate your ears. Contour make white or gray, and the rest of the part is painted with pink color.

When all the workpieces are dried, it remains only to connect them. In order for the bunny did not take away the wind, pour water into it or fill in sand.

Create elephant

To make a wonderful elephant, you will need the following materials and tools:

  1. Bottles of six liters - two pieces;
  2. Bottles of two liters - six pieces;
  3. Corrugated tube of a small diameter of the length of the half meter;
  4. Thick wire 55 centimeters long;
  5. Sand;
  6. Glue;
  7. Scissors.

at 05/28/2017 148,373 views

From plastic bottles you can make a lot of useful things for the garden and giving

With love, equipping the city dwelling, we are no less touching to our country sites. We try to improve them, create comfortable conditions for themselves and make special notes of attractiveness in smooth rows of beds and berry bushes. Many daches for their creative experiments elected the most affordable and flexible material - ordinary plastic bottles. About what products from can be done for the garden and giving, we will talk further!

  • Plastic Bottles House
  • Country crafts from plastic bottles step by step: palm from plastic bottles
  • Plastic crafts: several tips
  • Master class from plastic bottles step by step

Wonderful pendant pots for cacti from plastic bottles

Resourcefulness in ways to place many plants on the garden plot

Plastic bottles in skillful hands will become an excellent decoration of your landscape

Beautiful flower of plastic covers

Crafts from plastic bottles step by step: from Flower Cachepo to Fairy Thames

The idea of \u200b\u200bmaking useful fixtures and decorative plastic containers not new. The first attempts brought our grandparents to the construction of low fences for tracks. Evaluating the plasticity and low cost of the material, the craftsmen from the people went further. And now the country's dachas decorated with full fences, funny figures and unusual devices from plastic bottles.

Beautiful ostrich from PET Tara can not help your children!

Thanks to fantasy and such an excellent material as plastic bottles, we have almost limitless opportunities to create crafts for every taste, any complexity and direction

Pictures from plastic bottles and other capacities have grown into an integer art direction

Plastic bottles have long been very in demand from gardeners

Magnificent Orange Flowers from Pet Tara

Crafts and decorations for giving and garden from plastic bottles do not require the use of complex tools and specialized skills. The main thing is to have time and desire, and also enough material. Those who have also turned out to convincingly proved the limitless possibilities of such a needlework, and we have prepared an overview of the best examples of crafts.

Objects of furniture, vases and a vase from a plastic bottle with their own hands

Comfortable and very stylish chair of plastic bottles

A sheet of plywood, sixteen semi-cable bottles, tape - and a convenient and durable coffee table will appear on your site. Phaneur can be replaced by plastic or organomet, old countertop or plexiglass. Of the same materials, slightly changing the design, you can make a garden bench. Some diligent and patient masters manage to collect full-fledged sofas and chairs from bottles.

From plastic bottles you can even make the basis for a full-fledged sofa, if firmly and gently bore them

Suspended Vase or Base for Cachepo

Pinds of plastic bottles do it yourself

How to make pouf from PET

Plastic Bottles House

There are among dacities and real builders who know that it is possible to build everything from plastic bottles all that the soul will wish. They are assembled from plastic bottles of arbor, toilets, sheds and even. The only complexity of such structures is not in their assembly, but in collecting the required amount of bottles.

House with a roof of 7,000 bottles

Plastic bottles - a good material based on the construction of cottages, greenhouses, shower, toilet or other partitions

Walls of greenhouses from containers on a wooden frame

Rounds from plastic bottles will help arrange garlands for the garden

Playground: Flowers of plastic bottles and toys from plastic bottles

Crafts from plastic bottles will help to decorate the playground

All sorts of crafts from plastic bottles are especially attractive for the design of the playground. Absolutely safe, they can become the basis for toys, and for cheerful decorations, and to create plot compositions. Funny elephants, bees, swear and hedgehogs, bright flowers, cheerful lanterns will turn the country island of childhood in a fabulous kingdom.

Whole plot for the playground from plastic bottles and canister

From the caps of plastic bottles together with children, you can make small crafts, and large plot mosaics

Plastic bottle doll

Examples of a variety of crafts that will help gardery with placement, easy transportation and leaving plants

Piglets of large plastic bottles - Sustainable stands for germination of seedlings or small plants

Crafts for garden or lawn decor: PET-Tara parrot

DIY for the garden and useful little things

Multicolored turtles will become an excellent element of the decor of your garden.

With what ease, the "crazy" hands of summer houses turn the used plastic container into useful summer cottages, you can make sure passing around country areas. A washbasin was comfortable on the trunk of the village, and in the next yard, the arbor was decorated with multicolored with fragrant and ampel geranium. We also prepared for you several descriptions of crafts from plastic bottles for the garden and the garden.

Bird of plastic bottles do it yourself

Painted garden lanterns-owls painted

Bottom of plastic bottle

Birdhouse from plastic bottle make very simple

Plastic bottles cut in half will become a pretty flower pots, it is important to color them carefully. It is also desirable to take opaque bottles for this.

Forever confusing and stinging twine for garter seedlings will cease you to torment if you hide the tangle into a plastic bottle. Just cut the bottle in the middle, put in the top of the tangle in the upper part, skip the end of the twine in the neck, connect the parts, secure the incision of the scotch - and the comfortable storage is ready.

Drip watering from plastic bottles

Your seedlings will not start, even if you leave for a few days: install semi-automatic watering. And again the plastic bottles come into business. We cut off the bottom of the bottle, approximately 2/3, drill 4-8 holes in the tube, close the neck, pick up the bottle of the neck down, pour water - and seedlings are provided with moisture at the time of your absence. A similar garden of plastic bottles (photos of this confirmation) will save your time and financial resources.

Automatic watering "Aquasolo" is a conical nozzle on a bottle of carvings that do not require spending time on the drilling of the slots, launching into the ground and so on

Anthurium with a convenient automatic watering system "Aquasolo"

Maximum and saving place: suspended one over other plastic bottles with a capped tube with water passing through them

  • For the same seedlings of plastic bottles, excellent containers are obtained. By cutting the bottle in half and taking the bottom, pour into it a prepared substrate, plant the plants and place them on the rigged out of the wooden slats. This design is suitable for home decoration with flowers.

Beautiful pendant pots from plastic bottles will not only decorate the interior, but also make it unique

Excellent vase from a bottle of shampoo with your own hands

Arrangement in the country of compact placement of seedlings or small plants

Plastic Bottle Feathers

Some crafts from plastic bottles for the garden are affected by the owners ingenuity. After putting a bottle on the hose and doing a lot of holes in the bottom, you will get a wonderful diffuser for watering the garden. From five-liter tank, you can build an elegant lamp on the veranda, and the container from under the mineral water is suitable as a bird feeder.

Plastic Capacity Bird Feed

Simple and comfortable bipset jet hose for watering garden

  • Plastic bottles will help you save trees from pests. Cut the bottle along, two halves, fill the mixture attractive for pests with the addition of insecticides and join at the base of the barrel.
  • From bottles you can make a magnificent decorative all-weather and all-season flower bed. Just paint bottle snacks in different colors and assemble a wonderful carpet from them, sticking them to the open side into the ground. Figure carpet can be previously played on paper.

The design of PET follows was very popular

  • One Brazilian engineer made calculations and built a solar collector from plastic bottles. The design can be positioned on the summer area, connect with a cumulative tank, and you will always have a warm shower.

A device of a solar collector from plastic bottles

Automatic watering seedlings and decorative plants in your absence using the inserted next to the roots of a plastic bottle with small drilled in the neck or cover with holes

Hung one over another cut plastic containers - the fastest and economical output from the situation when you need to germinate a lot of seedlings in a limited space

Making owls from plastic bottle with their own hands

Bottles for germing and winter overexposure of plants - the ability to save place and provide good irrigation and drainage

Products from plastic bottles: art masterpieces

Magnificent dandelions from PET Tara will not cease to delight you and your guests

The fantasy of folk craftsmen is so diverse, which leads to the appearance in the country areas and wonderful animals, and the characters of fairy tales and cartoons, and exotic plants, and original thematic compositions.

Camping the bottom of the plastic bottle or cup with dry twigs and get an unusual candlestick protected from wind blowing

Rainbow Garden Decor, Workshop, Garage: Spiral Fountain, Sliced \u200b\u200bfrom Multicolored Plastic Bottles

Plastic bottles are used not only to decorate the garden, but also for the decoration of the home

Land crafts from plastic bottles:

If you have a small reservoir on the site, it can be plastic palm. It's not difficult to make it. You will need:

  • 10-15 brown plastic bottles (for palm tree trunk);
  • 5-6 green bottles (it is desirable that they are long);
  • iron or jerry rod;
  • shilo or drill for the manufacture of holes;
  • a sharp knife or scissors for cutting bottles.

Palma from plastic bottles looks very beautiful

Now proceed to the manufacture of decorations.

  • We cut all brown bottles in half. We take the lower parts and we are detected by the sewing hole in the bottom of each of them, in size equal to the diameter of the rod.

Tip! You can take the top parts of the bottles, then you do not have to do additional holes.

  • In green bottles, we cut a bottom of about 1 cm. One of the billets are left with a neck, the rest are cut off to get a loop.
  • Gently cut the green bottles along the three equal parts to the loop itself.

Palm tree making

  • The edges of the brown parts cut the cloves to create a simulation of a rough palm tree trunk.
  • Reliably fasten the rod in the soil. Calculate the length of the rod, laying up brown parts on Earth in one row, plus 2-3 cm on the leaves.

We put on it brown bottles.

Palm Tank Making

  • We ride our leaves on the free top of the rod, completing the work of the harvesting with a neck. In the lid, we do a hole and screw it on the last sheet, securely fixing the entire crown.

Connection of the barrel and leaves

Assembling palm trees from plastic bottles

Using several rods of different lengths, you can create a real oasis. As you can see, handicrafts for the garden from plastic bottles do it yourself are not so difficult, the main thing is to find a sufficient amount of material and take the basis of one of the proposed ideas.

Step-by-step guide: We make fabric pots on the basics of plastic bottles.

Hedgehog from a plastic bottle and a twine rope: grow seedlings and small rabid plants

Crafts for giving out of plastic bottles

From plastic covers you can create real masterpieces

Do not throw off the caps from bottles. Decorative crafts made of plastic bottles for giving and garden, too, can also be beautiful in his landscape. They will serve as excellent mosaic material for decorating fences and walls of the country house.

Bright compositions of plastic covers will help make your landscape design. Cheerful

Master class video (from plastic bottles of standard container):

The track of plastic covers is not only economical, but also very beautiful

Large-scale red-blue mosaic of lids of different sizes

With a slightly ending with the pattern, painting and drilled in the sides of the holes of the hole, you can collect the slot on the door. Excellent insect protection option!

The lids can be turned into a beautiful countertop, and in a practical rug at the threshold. Use them for the decorative finish of the internal space.

Magnificent curtains for doors made of plastic covers

Canopy for a car scattering sunlight

Beautiful lights in Hawaiian style

Before you start, remove the labels from the bottles and wash the container well.

For the stability of vertical structures, fill the bottle of sand or fine pebbles.

Dragonflies from corrugated plastic bottles

Caverium Fruit Collection Device with Trees

Pendant pots from PET containers depicting animals perfectly fit into the interior of the children's room

Choose for crafts different in the softness of plastic bottle. For example, for a dog's body or elephant, take a strong foundation, and it is better to use softer plastic for the ears.

Master class from plastic bottles (step by step):


Today we will tell you about how to make with your own hands simple and beautiful toys from plastic bottles. Such creativity is especially likely to love children: both the technique and the manufacturing process and the final result. So reserve bottles, paints and take about the work!

We have gathered for you the best ideas for inspiration and useful tips, with which you can easily make any of these 10 crafts. In this selection you will find toys created exclusively for entertainment, as well as accessories that will suit you in the future to store various trifles and as pencilies.

What do we need:

  • several empty eraser bottles;
  • paints;
  • stencils for drawing;
  • permanent markers (optional).


What to paint bottles?

  1. Acrylic paints. They cope with plastic and hold well. Do not pack your hands after drying.
  2. Automotive paints. If there is a motorist in the family, who had to tap scratches by car, then it is probably such a paint. Just keep in mind that they are toxic.
  3. Paints in the cans. It is convenient to apply them, but to create a picture will have to be used by stencils - otherwise the edges will smeach.
  4. Acrylic lacquer. Perhaps this is the most best tool To work with bottles. Convenient and durable.
  5. Enamel. Such paints are also good, but you have to endure nasty smell.
  6. Art paints. Their use is possible only with the fixing top coating, because standard paints for drawing on paper (like guaishes and watercolors) do not hold on the bottle at all.
  7. Permanent markers. They draw very comfortable, especially if you painted a bottle of one tone using a paint from a canister. Markers are convenient to draw various faces and small details.

Inexpensive set acrylic paints Aliexpress (see this link) on Aliexpress. Bright colors, excellent quality, high resistance - a universal option for various crafts.

"Wisther" from plastic bottles

These are toys, and pencils, and containers for storing small things. And the funny faces will not leave anyone indifferent!

Cut the bottom of the bottle to height from 5 to 15 cm (depending on which animal you want to do). Using a felt-meter, draw the outline of the head and ears. Carefully cut the bunny, chanterelle, owl, kitten or any other animal.

Cover his paint in one tone. Then draw the muzzle: the simplest - eyes, nose, mustache, etc. It is unlikely that the outline of the little animals will be difficult to guess.

Toy - flower pot

Plastic bottles toys can be not only funny and cute, but also extremely useful.

Cut the bottle smoothly and paint it into one color. Stick your eyes from beads or paper with a glue gun or superclaud. You can draw them.

Penguin family

This is a wonderful toy! She is so funny and honey that it is even difficult to take a look from her.

Cut the bottom of the bottle. Make a stencil from the cardboard to draw the muzzle and white breast of the bird. Paint a penguin's body into black, and breast - white. Make your eyes and beak using markers. Draw a penguin with a hat.

When the paints are frozen, complement the bird outfit with a pomponchik and scarf. If you make a whole family, it will be very cool!

Japanese sums

One of the best crafts from plastic bottles for lovers of Japanese culture. And if she doesn't like you, make funny bups!

To do this, you will need a small bucked bottle. Or you can glue the upper and lower part of one bottle.

Coloring in three colors: Calm, black and white. It is more convenient to prepare stencil and paint in advance.

Bottle snowman

And it is almost no need to paint this toy!

Take an empty kefir bottle or ripples (they are usually white) and remove the label. Draw a snapshot of a snowman. Decorate it with a hat to hide the plug and take a scarf toy. Hands can be made of wire.

By the way, if we rinse well and dry the bottles, they can be used as a container for storing any trifles: comfortable and beautiful!

Princess-frog

This toy is good and at home, and in the garden.

Connect two bottom cut from a bottle. Paint B. green color. On the plug, wear the crown carved from the remaining part of the bottle. Similarly, attach the frog of the paws.

For the manufacture of this toy you can take green plastic bottles - then they do not have to paint.

Toys without cutting

This method of decorating bottles is suitable for those who paint well.

Treat the image of the hero in advance. Draw it first on paper, and then transfer to the bottle. Are good not only ordinary bottles from lemonade, but also from, say, air conditioning or detergent.

ladybugs

These toys are perhaps the most simple. Usually they love to make children.

Cut the bottom of the bottle (height from 3 to 4 cm, no more). Collect it in one color and make black specks. If you have in stock there are only paints to work on paper - nothing terrible: Krave the little animal from the inside!

Make a head from a separate "rounding" from the bottom of the bottle. And your eyes can be drawn or take from the old toy and glue to superciles. Connect torso with a calf better with wire

Polar Mishka

The toy is very cute and touching.

The bear can be made of two bottoms from a plastic bottle. It will be convenient to take bottles of different sizes and just insert one to another, securing them for the reliability of glue.

Draw a hat along the contour and big beautiful eyes. "Wrap up" toy in a scarf and make her legs. You can complete the crawler with a fun pomponchik.

Cutter Bottle Hug

Large five-liter or large square bottles will also be useful for the manufacture of various toys. For example, you can make them a beautiful hut.

This wonderful gingerbread house Draws very quickly. The bottle must be painted in one color, and then make snow, roof and window. Add a sparkler so that the fabulous hut flashes the frosty items.

Try to realize any of the proposed ideas or come up with something your own. Working with plastic bottles is very simple. The main thing is a good cutter or thin scissors, reliable paints and, of course, the desire to fantasize. These homemade toys Will be happy for a long time!

Views: 9 485

Good day dear friends, today we will consider another very interesting master class on making Masha from mounting foam and plastic bottles. We all are well familiar with the cartoon "Masha and the Bear". Cheerful, interesting cartoon conquered and conquered many people, children love to watch this cheerful and mischievous cartoon. I think that many boys and girls would want to have this nice and fun Masha from the cartoon at their playground. Nadezhda Gulak. I decided to make a fairy tale on my site and make sure the fabulous characters who settled in his garden. Therefore, if you hit this page, then you want to make Masha for yourself or your kids. Let's get start and find out that we will need it for this and how can it be done.

For the manufacture of cars we will need:
* Plastic bottles.
* Wire.
* Filter Tractor or KAMAZ.
* Plastic old bucket.
* Styrofoam.
* Knife.
* Hose corrugation.
* Self-tapping screws.
* PVA glue.
* Mounting foam.
* Tile glue.
* Paint.
* Bandages.

The method of manufacturing MAC from plastic bottles:
First you need to prepare all the necessary tools and materials necessary for the manufacture. From these materials, we will make your head and torso with you.

We take the leaves and draw the face of Masha on it, to clearly see how to do it. Then we take the foam and cut the face out of it. The finished shape of the face is attached to the filter.

Now we take the old plastic bucket, it is fixed with a 5 liter plastic bottle on it and then brapping head top. We connect everything with wire and fasten well.

You can wind the body on one layer of gauze or cloth. We will do hands out of the wire, and then we dress the corrugation on it and fasten with self-drawing well.

Take 5 l. Bottle and she will make a cap for our car.

We dress it on the head, fix and fracture PVA glue.

Then we take the mounting foam and begin to apply it, give the shape of our craft.

The cap is wind by glue bandage + PVA glue, do it for strength.

Instead of hands, we will use children's gloves, gloves inside foam or other unnecessary bypass.

That's how it should have.

When the foam gets dry, you need to cut everything too much. Then again wrap everything with a bandage and lubricate PVA glue.

We are waiting for the glue dry. When glue dries with tiled glue. Tile glue + PVA, failed so in several layers.

Making cilia from plastic bottle brown color and glue them to the right place. Place your eyes, eyebrows, teeth.

That's ready Masha from the cartoon, it remains to paint with a lacquer and install in the right place. How to make a wolf from the mounting foam and plastic bottles you will learn in the next article.

Copyright © Attention!. Copying text and photos can only be used with the permission of the site administration and indicating the active link to the site. 2019 All rights reserved.