In what cases the external covering house from the bar is really needed. It is known that the wood is even the most durable, including the glued bar, is subject to rotting processes, can swell under the wagging of rainy weather conditionsmay negatively respond to aggressive environmental impact. Save walls will help the walls of the walls.
The house from the bar is aged, who has lost its original beauty or new, recently erected, requires outdoor protection. Not to mention the fact that after the cladding will significantly improve it appearance. The tree requires constant attention, every 4-5 years (deadline) is required to handle its protective equipment, maintaining wood health, invest money, spend time. The sheath will save money and strength you need to do it without postponing.
Important! Sewing a brusade house follows after 2-3 years of shrinkage, the exception is the glued bar, which practically does not change its forms.
However, only competent lining at home will be its protection. The main advantage of the wood is its ability to breathe. Proper finish It is to preserve the strength of the bar, creating a microclimate of wood favorable for wood.
The wooden structure is needed, first of all, to protect against moisture. Increased moisture creates conditions for the formation of fungal formations, mold. The processes of rotting are capable of turning the tree into the root in a short time. The level of moisture of the walls after shrinkage is 10-12%, the development of fungal colonies occurs when its level reaches 22%. The walls swell from oblique rains, fogs, during the snowmast, wood, as the pump pulls moisture and transmits it to interventory insulation. Parachi saturation occurs from the inside of the house.
Wall protection - ventilation, vaporizolation. The use of diffusion membranes, with a plurality of micro-rocker, windproof, repulsive drops of moisture and vapor insulation, non-transmitting water vapor films - be sure to correctly cover the walls.
Important! It is impossible to use polyethylene, biting the design tightly, not allowing to breathe wood. The use of ordinary spanbond, megazoles and other vapor insulation membranes is preferable, by the way, they are not much more expensive.
Mandatory is a device of ventilation gaps in any form of finishes that contribute to the output of moisture, free air circulation.
To improve the framework, on which the finishing material is mounted, you should use a wooden timing with a cross section of 4x5, 5x5. To create the recommended value of the ventilation gap in 4-5 cm, you should use the counter rail from the same timber. The ventilated facade suggests the presence of holes covered with lattices that provide free air intake.
Important! The use of a metal profile is not recommended. Metal freezes, when thawing, condensate is allocated filling inner space moisture.
As a heater is preferable to flax or jute. Mats from these materials are not cheap, but their use justifies completely. Mineral wool eventually seek, artificial polymeric materials, not breathing, are not too useful for health, natural insulation serve for a long time, protect reliably.
Many materials are a lot of materials. But those who have important characteristics for this purpose are necessary:
This is worth adding the simplicity of installation and low cost. Aesthetic advantages of materials I have not recently.
For lining of the brusade house, the construction market offers today different variantsConsider only some of them. It:
These materials have undoubted advantages, have drawbacks. Everyone has different costs and operational parameters. Each type of finish can be used for a brusade house, from the point of view of preserving walls, their protection.
Benefits Block - House begin with appearance attractiveness. It is especially valuable for those who would like to keep the appearance wooden structure. Block House by manufacturing method:
The first is made from natural tree, by processing the "square in a circle", spil the outer semicircle logs, soaked with special compositions, are segged, excluding any deformation. The disadvantages include the weight of the finish that creates a serious load on the foundation and bearing wallsWhat should be taken into account when finishing old houses, as a rule, not having foundations.
Metal block - House imitates the tree, is steel or aluminum. The explicit plus of the material is durability, resistance to wear, inertia to the solar rays, biochemical aggression. Modern manufacturers offer a variety color Gamma.The sophistication of textures, the buyer is provided with a worthy choice.
The vinyl block is made from PVC, its advantages are durability, a light weight, resistance to temperature differences. The disadvantages should include the fragility of the material, especially in conditions of severe frosts. Aesthetic data is acceptable.
Installation block - House produce on wooden framemounted on a pre-prepared and trimmed by membrane film wall.
Important! The timber used for the frame requires additional processing by antiseptics and antipirens. The residual moisture of the bar should not exceed 12%. If the weight of one stick is noting - you need to dry.
The pitch of the clamp 50-60cm, the counter mustache makes the same cross section or 30x40mm from the bar, are installed on the windproof layer. Installation of panels Block - House starts upwards. Follow the horizontal installation. The lower part of the building (minimum of 30cm from the Earth) is trimmed with a stone or base panels.
Block - House is equipped with comfortable lock connections, mount panels to the crate can be klyaimers, self-drawing, galvanized nails.
The main advantage of the professional flooring is its price. Just like all the materials considered in the article, it is easy to install, and therefore is popular with those who do it with their own hands. In addition, professional flooring is durable, has good performance features, low weight, not particularly increasing the load on the bearing walls and the foundation.
Manufacturers offer monophonic sheets or with a pattern that imitates the tree. Sheets are produced thick from 0.8 mm to 1mm, the height of the corrugation ranges from 8mm to 35mm, the sheet width is also different from 1076x1035 to 1200x1150 mm.
What is a facetl, this is a steel corrugated sheet with an external coating, the front desk connects two types:
Quite often used coverage - galvanized. It is applied in the process of rolled sheet by hot application. The use of such a professional sheet is unlikely to decorate the house, dull colors, boring grayness even for the fence is not suitable, in addition, with time, the material becomes vulnerable to corrosion, the only advantage is low cost.
Tip! It is better to use a polymer coating straightener, its cost is not much different from sheets with galvanized, but the benefits are much higher.
The combined coating of zinc with aluminum eliminates these flaws. Professional property acquires quite decent specifications, resistance to biochemical exposure, abrasion, anti-corrosion properties. Polymer coatings with similar chemical and technical indicators look more attractive. Polymers are applied on top of galvanized. Plasticize the layer in 175 microns protects against ultraviolet, polyester adds gloss with surfaces, the Purally significantly improves the strength of the sheet and its appearance.
We are trimmed by a straightened surface of the walls on the principle of the ventilated facade. If necessary, lay a layer of insulation, mandatory vapor barrier and windproof. Mounting can be mounted on a frame of a wooden bar or metal profile.
Profile step 60cm. First install brackets with self-leveling function on the self-tapping screw. Installation is made on one vertical. P-shaped vertical profiles are put on the brackets. Then fasten the insulation, vaporizolation. Then the professional sheet is mounted. Fasten with screws with hats and washers.
Important! A compensation gap needed to extend the material under the influence of heat should remain between the Hat and Proflist. Dogs are installed at the joints to hide them.
The mounting on the ram is similar, only instead of P-shaped profiles set the bars set on the edge.
The base of large sizes in principle is not needed, but its presence is important in terms of the aesthetic perfection of the facade.
Refers to the most popular types of facade. The material is relatively not expensive, possesses all the necessary technical and operational advantages. Suffice to say that it serves such a finish up to 50 years. Houses are covered with siding look attractive, neatly.
Initially, it makes the mandatory preparation of the walls, extract unnecessary parts, remove lights, lowers, window sills, remove nails. Gaps and cracks are poured with sealants. The timber is treated with antiseptics, impregnation with protective properties that extend the life of wood.
Tip! It is better to use silicone sealants, with solidification, they areolating the cracks from moisture, fasten them, enhancing the sparesiness of the tree.
For a frame, it is preferable to use the 40x40, 40x50mm reached by an antiseptic from rotting and microorganisms. When installing, you need to monitor the lines so that the surface of the siding is perfect, use the level.
The insulation is laid between the cutting racks, the vapor insulation membrane film is mounted on top. Then set the crate to obtain a ventilated facade. The bar for her can be smaller than 30x40mm.
Siding installation starts from the starting panel. All subsequent planks are installed with a gap for thermal expansion. Corners are equipped with special elements, as well as separate details will be needed for the framework of window and door openings. Manufacturers believe that for montage of siding, sufficiently castle compounds that are equipped with all the planks, however, the practice shows that additional fixation does not prevent self-drawing.
Side selection is great. Excellent properties, hygroscopicity, inertia to biochemical exposure, durability, plastic siding is distinguished. Its price is quite accessible to average income. The disadvantage is fragility, especially in frost, the average resistance to burning. Metal siding is distinguished by increased wear resistance, does not fade into the sun in contrast to the plastic. Durability and ability to maintain a primordial look - its special advantages. Disadvantages - higher price, high weight. Wooden siding does not use special demand. Such protection requires constant care, antiseptic machining, protect the tree by wood is not reasonable. Joke Trim Toculation There is a special siding - base.
The lining of the brick is the construction of a considerable weight barrier. Planning such a facing follows in the design stage. In addition, a competently equipped ventilation system is required to release a bar from excessive humidity. It is advisable to use brick facing only if the house is laid out from the bar with a cross section of 150x150, saving on the walls of the walls, you will have to spend money on additional insulation so that the family has not ruined the family budget.
The foundation should be wide so that the area of \u200b\u200bthe sole withstand the total loads. Ventilation gap with a width of at least 50mm to the width of the insulation layer. Let us need ventilation holesequipped with lattices in the second row of masonry every 10 meters.
Fasten brick K. brusade wall With the help of ties - metal elements, one of which is immutted in the seam of the masonry, and the second is clogged into the bar. On 1m in the length of the brick 5 connections, in the height of the communication, they are mounted for each 5th row.
Important! Facing bricks only after a complete shrinkage.
The house after the trim looks presentable, solid. Its operational characteristics are rising.
New technologies are gradually entering our lives. The covering of thermopanels is not only at times improves the characteristics of the house, it changes dramatically exterior appearance Buildings turning it into fairy tale.
The material replaces the brick, stone, does not require insulation, the multi-layer porous structure reliably protects the walls from moisture, frost, and other environmental impact. Parosolation and windproof is not required, everything is provided in the structure of the panels. To establish thermopanels and forget for many years about the problems of the facade, paying, however, decent money for the material is a reasonable decision.
Installation can be cleaned with a wet method (thermopanels are glued to the surface of the wall), can be installed. The mount is produced by tight docking of the panels among themselves, fixing self-draws.
The choice of material for the cover of the house from siding is diverse. What is better for you - decide!
All photos from the article
This type of work as a finish of the house from a bar inside with their own hands can be performed in different ways, it all depends on the solution you chose. Therefore, it is important to decide in advance how it will be done by this or that room to purchase everything in advance. necessary materials and familiarize yourself with proper technology Work.
In this review, we will consider the most popular options and tell how to implement one or another project.
Before we consider options for interior decorations of the house from the bar, we need to deal with what the main features this material has, because this is largely affected by the choice of a specific solution, all data are presented in the form of a table for greater visibility.
| Shrinkage design | Even if you decide to separate the surface with any materials, it is possible to do this no earlier than in a year, but it is better to simply wait for two years. This is due to the fact that the crowns after the construction are inevitably sitting down, and the process stops only after the material moisture is stabilized, and it can take from 1 to 2 years. Do not hurry, as the likelihood of cracks is very high, and you will have to do a new job |
| Ability to absorb and give moisture | One more characteristic feature Woods, thanks to which in buildings from this material The optimal microclimate is always supported. But if you hold finishing works, in no case do not cover the surface of the film, it is necessary to use a vapor-permeable membrane so that the excess moisture from the tree can be easily leaving, otherwise the process of rotting can begin. |
| Ease of processing | The decoration of the brusade house from the inside is much simpler than working with surfaces of bricks, concrete or blocks. This is due to the fact that the screws can be twisted, if necessary, damage and contamination are quickly removed by grinding. That is, no matter how much option you choose, it can be easily implemented without any problems, thanks to this, you will save significant funds, since the price of work is quite high. |
| The need for periodic coating updates | This item concerns those options when you do not use additional materialsAnd simply apply a decorative protective coating on the surface. So that the structures always looked attractive and were reliably protected from the destructive impact of moisture, it is necessary to process the surface every few years. |
Important! If you decide in advance that you will not close the walls, but simply paint them or apply impregnation, then in the process of holding work, try not to pack items and do not go on them so that you subsequently have to spend time to remove contamination.
At the last stage of construction, the interior is completed by a tree house.
The interior, comfort and convenience of your home will depend on how seriously you are going to solve this problem.
Materials and methods of finishing play an important role.
The main components of the house are the main components - walls, ceilings and floors.
What material should be selected for repair - build on the quality bar.
If there are flaws in the wood, it is advisable to hide them. There are some simple ways to do this:
The choice of materials for decoration depends not only on the quality of the walls, but also on the conceptual design of the future repair.
The tree looks natural and aesthetic, in addition, it "breathes", which allows natural sex for many years.
Paul can be polished and opened with varnish or paint. If there are gaps between the doors, they must be filled with a mixture "for wood". 
If you have linoleum or laminate on the floor, consider the ventilation methods.
Otherwise, the soil will choke and deteriorate quickly.
Ceiling can be left as it is, or it can be drawn and draw. If the ceiling is uneven, it can be covered with plasterboard, which can then be drawn or pasted on the film.
Modern material for inverted walls - the house is in demand.
These are panels that imitate round magazines.
Such a method is suitable because it supports a common idea and design. wooden house.
The decor in the house can be created with the color of any shade, at the request of the owner or with the idea of \u200b\u200ba designer.
Coloring can not only give the space an aesthetic appearance, but also protects against moisture, which leads to the reproduction of microbes, the growth of mushrooms and decomposition. 
Hide the wall errors put sand.
Then all errors are aligned, bones and teeth are hidden, as well as cracks and cracks.
The next step is that the walls are ready to prepare the surface of the color.
The modern market offers many different acrylic colors for the tree of all types of shades and textures.
If you want to leave natural wooden walls, they can be covered with stains or wooden varnish, which will protect the walls, give the shine and emphasize the natural pattern on the tree.
If so, then you can not finish it. 
To pre-foresee the result, process the entire test block of the tree, and then start decorating the walls.
When working throughout the room, use one treatment method and use the same material.
For example, varnish one company can be somewhat different in density and structure from another, which leads to uneven precipitation.
Use the same tool - either the roller or brush.
To achieve the best results, apply the color in two layers.
This will provide a solid color without spaces and spaces. 
If you do not want to make up or apply a varnish, you still need to simultaneously handle antiseptics and liquids with mechanical damage and agents that reduce the flammability of the tree.
It is advisable to fulfill all the work after some time after the construction of the house, so the tree is the "village".
See Tied Video:
In the case of insulation, use only respiratory materials, otherwise it can lead to wood decomposition.
Interior decoration of the house from the bar with decorative stone It is an extremely pleasant option.
The walls from the profiled bar have a smooth and smooth surface, so the small material is intended for the manufacture of walls on the stone. 
Advantages of decorative stone:
Plasterboard and lining are among the most popular wall processing methods.
The substrate is convenient because it is easy and easy to install. 
The walls of the plasterboard should be sewn, and a box of metal or wooden rails should be installed.
Make sure you communicate with the sheet material. Wires and pipes can be hidden behind the sheets.
You can also place mineral wool that will provide thermal and acoustic insulation.
There are many features in the wood of wood that should be taken into account when decorating internal surfaces. 
Walls should be processed in accordance with the structure of the wood.
Before applying the finishing materials, it is necessary to apply liquid on the walls, which will protect against mold, insects and mechanical damage.
If the wood is processed by glossy composition, you will get twice as much gloss when applying paint or paint.
The main thing is to prepare the pattern before decorating the walls.
Take a piece of pieces and process it so that you can choose the end result.
According to the processing and material, wood reacts otherwise than impregnation.
The main thing is to use the same material when interior decoration Houses from the bar throughout the perimeter of the surface, so it looks solid and smooth.
Another video on the topic of the article:
If all stages of work are performed in accordance with the requirements, you will enjoy more renovation for a long time.
For a home bar, interior decoration is an important element of construction, which comes under the curtain. In the decoration there are several different approaches characterized as different materials both technologies and different in aesthetic sense result.
If your home is built of wood, then it is unwise to hide, many consider it. With due processing, the wooden inner surface of the walls looks and operated better than any wallpaper and trim. If you follow this approach, then the further decorative design of the house should be done mainly using wood, switching to stone, tile and ceramics only in cases where it is necessary - a clear case, that it is impossible to organize a whole wooden stove or fireplace.
In this case, preference is given to natural materials to preserve "naturalness" and, if desired, even the "traditional" of the home environment.
However, wooden walls may not all come to taste, because they require specific care. After construction, the walls are grin and impregnated with protective compositions, but when the surface of the walls are damaged, this procedure will need to be repeated so that moisture or microorganisms do not spread the wagon of the wall timber.
Another option - the interior decoration is emphasized with modern materials, relatively inexpensive and practical.
For example, both outside and inside the walls can be seen by clapboard, which is easy, and is economical, and convenient. The cons of the lining lie mainly in the aesthetic plane, so the whole question is why you need a house and how exactly you are going to live in it. Modern lining, I must say, can have extremely different color and invoice, so if you wish, you can even strover the walls with metal clap "under the tree", and the true material will be noticeable only with a bride.
The latest approach we described will be using modern materials - metal, plastic, composites - having as external decoration Simulation of natural materials.
In principle, the same materials are used for the interior decoration of houses from the bar as for decoration, for example, a brick house.
But the tree has a number of features that need to be taken into account when performing finishing works:
Shrinkage is connected with the fact that the timber dries and slightly decreases in the amount, in addition, due to the actions of the constant load, the gaps between separate bars decrease.
As a result of this, by the end of 5-6 years of operation, the height of the floor may well decrease by 2-3 cm. Such deformation can adversely affect the appearance of the wall (cracks can occur in plaster, the tile can partially fall off or cracking).
Using the glued timber partially solves this problem.
In this case, the shrinkage of the house is completed by the end of the year after operation.
The tree in itself is an excellent finishing material, so if the surface of the walls inside does not have obvious flaws, it is quite possible to leave the walls and without additional finishes.
It will only be enough to soak wood with the appropriate composition to give it the necessary shade.
But wooden walls do not always correspond to the demands of the owner, the wall finishing options in this case have a lot of finishing options.
Regardless of the selected folding method, the tree must be soaked with an antipirethrough and an antiseptic. Otherwise, wooden elements will quickly come into disrepair.
The method of finishing depends on the age of home and destination.
So, for houses whose age exceeds 5-6 years, there are no restrictions. For houses, whose shrinkage has not yet completed, it is not recommended to use low-informative finishing materials, such as tiles.
In general, such options for finishing the house of a bar inside are possible:
Painting.
The advantage of the color of the walls can be called the fact that the layer of paint will serve as an additional protective layer for wood.
Painting Houses from Bruus
You can simply shook the house inside.
In this case, special attention should be paid to waterproofing of wooden surfaces. Actual work is not recommended to begin earlier than one year after the end of construction.
Stucco Walls from Bruus
Finish by a block house or clapboard.
This option is used in the case when the walls inside have an unsightly appearance, but the owner wants to keep the wooden surface inside the house. This method of finishing is recommended only after shrinkage at home. Initially, you need to create a frame that will slightly reduce useful Square Rooms.
Preparation for finishing Block House
Tinting wood.
For this, wood needs only to be cleaned of dust and soak the composition in order to get the required hue.
Gypsum trim.
Perhaps the universal option for the interior of the house from the bar. Then, after putty, you can stick on the plasterboard, paint. On plasterboard, you can even put a tile. For decoration of the room with high humidity Also most often used drywall, it is recommended to use a moisture-proof type of drywall (greenish tint sheets).
Example of finishing a house of timber plasterboard
An important advantage of finishing the house of a bar plasterboard can be called simplicity of commissioning of communications.
Wires and pipes can be carried out in space between the surface of the wall and sheets of drywall. The disadvantage of this method of finishing can be called some loss of useful area.
Example of laying communications
When finishing the ceiling quite often, ceiling beams are not masked, but act as an element of the interior. As for the ceiling finishes by traditional ways, for example, the execution of plaster, then in the first 5-6 years it is not recommended.
The fact is that shrinkage of the house causes the redistribution of efforts in ceiling beams. A compromise option can be trimmed with a ceiling of plasterboard or a tension ceiling device.
According to the materials of the site: http://strofix.ru
Having finished the construction of the house from the bar to relax even early. The final stage is finishing works indoors to give the home of a cozy atmosphere. View options for interior decorations of the house from the bar can be in the following photos.
Works on the finishing of the brusade house inside include several stages in which:
Having experienced work experience and sufficient repair knowledge, it is advisable to hire workers for a qualitatively performed job, to which they will have to spend more than planned.
This is especially true for communications.
An example of an interior decoration of a wooden house
Before proceeding to finishing work Rooms inside, it is necessary to make a thoughtful design to the smallest detail.
This will help to visually see what needs to strive and calculate the required amount of materials and their cost.
The internal finish of the house is to apply the same materials that are used in other houses. But wooden houses have two important featuresthat need to be considered before starting work on finishing:
Before it ends, it may be necessary to need from two to six years after construction is completed;
Drying timber and a slight decrease in it in the volume are affected on the primary shrinkage.
There is a decrease in the gaps between the bars, which is affected by the permanent load. As a result, after the end of the shrinkage, there is a decrease of 2-3 cm of the height of the floor. Significant deformation is able to negatively affect the finishing work (the appearance of cracks of different sizes in the plaster, the tile disappears).
Glued bar in cut
Solve the issue will help the glued bar.
In this case, the shrinkage of the house will stop a year after completing the construction.
The secondary shrinkage is influenced by fluctuations in temperature and humidity of wood. It should not be negatively reflected on facing coatings.
There are several internal finishing options for the internal finish of the house from a glued or profiled timber.
Before laying a flooring, it is necessary to raise the draft floor with the insulation laid in it and the waterproofing layer and covered board.
Such a floor design is pretty simple, well keeps warm and protects against noise.
Materials for pure floor covering serve:
She is clean environmental Materialwhich breathes and has excellent moisture resistance. The board is durable, durable and easy to care. It has many processing and tinting options. Well updated with a cycle or ordinary grinding. Such an outdoor coating is not suitable for the "warm floor", because most of Heat will be spent on the heating of the tongue itself.
The material is suitable for the "Warm floor" system. Choosing a coating having good thermal conductivity, it is necessary to pay attention to the one that is indicated by the corresponding labeling.
IN wooden house better make wooden floor
Before finishing the walls in the house from a bar inside need to be treated with an antiseptic agent.
Processed tree.
The tree itself can be a wonderful finishing material. In the case when the surface of the inner walls does not have any drawbacks, then they can be left so, without separating. It is only necessary to impregnate the tree with a special composition to obtain the desired shade.
Staining walls will not only retain a natural wood structure, but will be additional protection For wood.
It is necessary to choose for the inner walls such paint coatings in which the lowest amount of harmful substances content.
Plaster. It is necessary to separate the walls by it only after the year after the construction of the house. It is important for special attention to the waterproofing of wood surfaces.
Block house or lining.
When the externally walls look not particularly attractive, but I want to keep a special pattern, which has a wooden surface, such materials are used.
This finish is applicable only after shrinkage at home. A frame is created for mounting, which will slightly reduce the area of \u200b\u200bthe room.
Wall panels.
They are produced from wood without adding glue. Material is an eco-friendly and hypoallergenic. Possess good heat insulating characteristics, easy installation and perfectly absorb the sound. Top covers panels vinyl wallpaper or flax fabric.
Plasterboard. On this type of finish after applying putty glue wallpaper, painted and put the tile.
For premises where high humidity, it is necessary to choose plasterboard, resistant to moisture. He has a greenish tint.
The material is environmentally friendly and easy. Installation it takes place on a metal or wooden frame.
Such a design prevents the bruse and drywall conclusions, which retains the bearing walls and the trim from the formation of cracks. It is possible to carry out electrical wiring, plumbing and other communications that will be conveniently hidden. If necessary, it is convenient to lay the insulating layer.
You can leave wooden walls just wooden
Often during the trim of the brusade house inside the beam on the ceiling are not closed, and serve as an interior element.
Not a lined ceiling will harmoniously fit into different styles (Provence, Country). Until 5-6 years have passed to end the shrinkage of the house, the wonderful material is a plasterboard or stretch ceiling. He perfectly covers the ceiling well without preventing shrinkage at home.
During the shrinkage of the house there is a redistribution in the beams on the ceiling of effort.
Only after its end it will be possible to finish the ceiling in the usual ways, such as plaster.
It is necessary to respond to the interior decoration, which consists of a number of events. Do not forget about a significant shrinkage at home and the sensitivity of the tree to moisture.
It is important to properly start working on finishing, otherwise all violations and deviations from technologies will be revealed.
Fix such errors is often more expensive than making all the work in a new one. We recommend familiar with the video, you may need a similar finish option.
Wooden houses are very pleasant, comfortable and environmentally friendly. But over time, wooden surfaces deteriorate, losing initial appearance. And no matter how wood is processed to prevent moisture or antiseptics, surfaces are gradually used.
Only the external processing of the house will last a long time. The completion of the facade of a tree house is carried out using various modern materials.
To confront not only the improvement of the strength of the design, but also design. In addition to these tasks, the completion of the facade will help the house to warm up and improve sound insulation.
There are many ways and opportunities to finish the facade of the house from the bar.
Materials used for confrontation are different. Their choice is completely dependent on the taste of the owner of the house and landscape design.
For this method, acrylic and mineral plaster are used. In this case, a special reinforced grid is used, which performs a protective function before breaking the water.
The composition of mineral plaster includes plasticization.
But the color of the facade can only be light. Acrylic plasters leave water vapor and support air exchange with wooden walls.
Facades filled with decorative and acrylic solutions are very pleasant.
A mosaic plaster coating obtained by adding marble chips to a solution is particularly effective.
But on the surface of a wooden house, this decoration does not look at the best side. Protective properties of plaster are lost for just a few years.
This type of liner is often used in areas with a cold climate.
To fit the facade to the hinge, at a certain distance from the wall, a special frame creates an air gap.
The use of the facade of the house of the tree acquires additional sound insulation and thermal insulation. The design allows ventilation of the walls and creates steam pipelines.
The advantage of completion is the independence of the device from the season. The facades of the exchange create a well-preserved and attractive view of the house.
The most common material for the house from the bar is considered brick.
The facade of this material provides protection wooden walls From the harmful effects of the environment, well isolate and improve fire safety.
Brick bricks perform aesthetic functions. His proposal is presented in many colors. Thanks to this, the house looks rich and noble.
Brick is located at a certain distance from the wall and creates space for natural ventilation.
When you finish with bricks, consider the burden on the foundation, so it will not be too difficult.
Facades out wooden houses often covered with coating.
This material is great for outdoor and internal work. Do not think that it is a short-lived and perishable material.
If it is properly processed by protective means and strictly vertical sawing, the coating can last long enough.
Special attention is paid to the quality of the selected material.
The absence of nodes and signs of fungal attack, the correct characteristics of drying extended the service life of the coating.
Improve wood with silencer, cracks, construction solutions and varnishes.
Soft padded wood pad successfully protects the house from moisture and increases sound and thermal insulation.
Wooden house facades are often used to imitate sticks. This is an alternative version of the substrate. The material is dried, protected by additional impregnations, so the block is not subject to decomposition and deformation.
The equipment can withstand unpleasant environmental impacts and for a long time retains its integrity.
But when you come across this material, be sure to put waterproof.
Blockchaus is no cheap material. However, it fully justifies its value. The material that imitates the bar, gives the house an elegant, noble view and creates a favorable impression of the owners.
Toilets are often used to finish the facade of a wooden house.
It is considered cheap and durable. Toilets will help the house to be beautiful and protect the edge from external harmful factors, insects and moisture.
Excellent temperature tolerance does not disappear in the sun and does not support burning. A light polymeric material can "breathe", it is not toxic and is not dangerous to human health.
It does not require much care: it is enough to rinse with polluted water.
Installing the side track can be performed quickly and easily only two people. The disadvantage of this inverse material is a weak acoustic and thermal insulation property.
The stone facade of the wooden house is reliable, practical and elegant. Natural stone is an environmentally friendly material that is used when working with several generations of builders.
In the summer, the stone will not allow to overheat the building, and in the winter it will keep warm in the house.
The decoration with natural stone enriches the house, makes it durable and elegant.
Facing at home by natural materials requires significant financial investments. That is why the stone is often combined with a tree or tile.
The facade of the house can be lined with natural stone using facade plates. It fully performs the features of protection and thermal insulation.
Tiles can change the appearance of wooden houses that they do not know.
Special attention is paid to a wide range of colors. Democratic prices are becoming more popular than natural stone. Universality to use, simplicity of installation and durability - the main advantages of this inverse material.
PVC panels perfectly imitate the surface natural stone or brick.
This material fully opposes negative climate change and does not need special care.
PVC panels are durable, quickly and easily mounted. Most often, this material is used to work with the base of the house. A feature of the panels from other materials faced is resistance to chemical influences.
Tree houses are very popular. To maintain ecology, durability and durability of housing, special attention is paid to the facade finish.
The appearance of the walls of the house with the beam affects not only design, but also on some operating functions.
The facade can be designed independently or with the help of experts.
But the completion process requires certain knowledge, skills and experience. Therefore, it is better to invite professional experts to fulfill this work or at least get a qualified council from them.
What is the interior finish at home? These are work aimed at creating comfort and comfortable room. It seems that everything is simple and this is true if the interior decoration is produced in a brick building. When working in a house from a bar, special requirements are presented to it.
First of all, you need to fulfill these works. Think of layout water pipes, air duct, sewage and telecommunication compounds. All these benefits of civilization are paired at the beginning of the finishing work, which results in the result of hiding them under the frame of the plasterboard wall or plaster. It is very convenient. Do not stick through the corners of the connecting elements of the pipes, and the wires of the Internet connections. But thinking on the wiring, take care of free access to the water supply screws. If during the operation suddenly it will be necessary to replace the coupling or crane, there must be free access to them. For this, separate boxes with plastic doors are equipped. They do not spoil design and provide free access to replacing the factor of the crane.
Important! It is impossible to lay the hidden wiring in a wooden house. This is strictly regulated by fire supervision safety standards.
But this does not mean that the decor of the house will be spoiled. Plastic cable channels and boxes allow you to reliably, and in some way it is originally hidden wiring. Safety standards are not violated in the rooms on the floor, there will be no multicolored "snakes" of the electrical cable.
The eternal object of the dispute of the finishes is that the floor or ceiling first is solved in this case simply. Based on the fact that during the construction of a brusade house, the draft flooring is stacked, then at first we begin to the ceiling finish. Dirt and dust, remaining after work on the ceiling finishing, it will be easier to clean with a rough floor, without worrying about its safety.
You will have to choose from several options. The most expensive is shuffling and painting. In the entire area of \u200b\u200bthe ceiling surface, a reinforcing grid is stuffed, after which the plaster is applied. The first layer of draft, the second leveling. After drying, the processing of finishing putty and painting.
Another option will be trigging. Initially, a framework of bars or profile panels is built, after which the material is placed. In this embodiment, an additional heat insulator laying is possible.
The easiest, but no less interesting in the decorative plan will be the installation of stretch ceilings. No need preparatory work. If there are irregularities and drops, the tensioning film will hide any disadvantages. In addition, this option allows you to first lay a sexual coating, because garbage and mud from installation stretch ceilings In the house from the bar almost will not be. A couple of profile segments and stretch canvasThe remaining after installation will not make the "weather", and, removing them, you definitely do not spoil the parquet in this regard.
And what about the floor? Basic coating leave. The layer of hydro and thermal insulation is stacked on top of it, after which it is stabbed a blank coating boards. If more serious insulation is needed, then first dismantle the old boards. Between lags you can pave a layer mineral Wat Or make a filling of the clamzit, after which it is to lay a gender. The option is selected based on the seasonal use of the brusade house and the climatic features of the region.
Setting a finger coating, the boards are grouped hand tool, with special circles. After that, the whole dirt is cleaned with a vacuum cleaner. Additionally, pass the brush with a metal pile in the places of connection, cleaning the shake of them. Then the vacuum cleaner and antiseptic processing. In residential premises, water-based formulations are used, any option is allowed.
How the finishing finish is suitable for linoleum, carpet, parquet, laminate, etc. But what prevents you from using the natural beauty of the tree? The surface treated with a transparent antiseptic surface is distinguished by its originality, which is not able to repeat any finishing material. Therefore, there are also enough reasons for reflection and selection for finishing the floor is also enough.
First of all, after building a house from a bar, the walls are grouped, processed by antiseptics and cavalo. Protective compounds are applied evenly into several layers. Impregnation will fall smoothly, without creating a variety of color ranges. After all, even using a colorless antiseptic or primer, the original tree tone changes slightly.
What is used in decoration? Let's start again with a natural tree tree. Without resorting to the use of other options, after processing with antiseptic compositions, interior walls From the bar you can cover with varnish or paint. Again, follow safety: Use the compositions for residential premises. 
without adding acetone and solvent.
If you decide to separate the walls with a wall, then you will have to make a crate of bars or metal profiles. As an option, instead of panels, you can sew the frame of plasterboard, paint the walls or wake up wallpaper. But you see, this is not too decorative version of the wooden house.
The inner decoration of the house is the face of the owner of the apartment, you can say your business card. Therefore, starting to finishing work, it will not be superfluous to read small recommendations, adhering to which you can do everything correctly:
Guided by the right technology for processing the house from the bar inside, there should be no problems after repair. Walls, gender and ceiling will regularly perform their functions, protecting the house with heat and creating comfort in each room.
Interior decoration at home is performed at the final stage of construction. It depends on how the interior will be beautiful and cozy. This process is quite complicated and requires certain skills and knowledge when working with various species Finishing materials.
The largest surface of any interior is the walls. If the surface of the bar has a lot of flaws, it is better to hide them. There are several ways for this: coloring, cladding with natural wood with or MDF and CSP plates. It also applies to drywall. An option of interior wall decoration depends not only on the state of the surfaces of the timber, from which the walls are folded, but also from the designs of the designer and personal preferences of the home.
If the floor in the wooden house - it is better not to cover any outdoor material. First, it will only hide the natural beauty of the wood, and secondly - will not allow it to "breathe", which can lead to it. Wooden floor is better to open and paint. But if between the floorboards are too big clearances, and the quality of the surface of the boards leaves much to be desired - it is necessary to use a putty. If you certainly decided to cover the wooden floor with a linoleum or any other outdoor coating - It should be provided for the presence of ventilation channels under the floor, in the base part of the building. Laminate is laid only if the base surface is perfectly smooth and durable.
The same with the ceiling: the log overlap is separated as well as the wooden floor. But if its surface is unsightly - it can be seeded by plasterboard or any other sheet material, which then put off, after which - painted or salary wallpaper.
And the ceiling, and the walls of the bar of the bar can be fermented using a block house - decorative lining, resembling a rounded log. This method is not only aesthetically attractive, but also combined well with the main building materialFrom which walls and overlappings are constructed.
Often the walls of the house from the base from the inside are painted by opaque dyes. This method of wood processing will not only decorate its surface, but also protects it from the impact of moisture contained in the air, which means that the fungus and mold. Before the coloring wall of the house is put off to hide chips, cracks and swirls, after which they are covered with soil: it is necessary to prepare the surface to coloring. 
Choosing paint for the interior, one should give preference to the one that contains as little as possible harmful substances. Paint is with a matte surface, glossy and semi-man - it is also taken into account when it is selected.
If the surface quality of the timber does not require special processing, a simile or special transparent varnishes are used for wall color, emphasizing the natural pattern of wood. This technique is particularly effective if the walls of the house are from a bar of valuable breeds.
Use for this cement-chipboard and plasterboard. The latter is the most popular, as it has a small specific weight, is easy to process and is an environmentally friendly material.
For cladding, the plasterboard first perform installation of crates from wooden plates or metal profile. Different communications can be hidden for sheet material: water pipes, pipes heating system, wiring. If necessary, the cavity between the base and sheet material can be laid insulation.
When finishing a house built from a bar, it is necessary to process its inner surfaces, taking into account the structure of the wood, its ability to absorb odors. Finishing materials should protect it from mechanical damage, damage to mold fungi, insect-grillers.
If wood was treated with a glossy protective composition, then the glossy dye coating is twice as much as shine. Therefore, before applying the protective coating, it is necessary to make a test sample.
Wood, depending on the method of its mechanical processing, can perceive the impregnation in different ways. So that different parts of the walls look the same, it is necessary to use the same way to process them. To achieve the desired result, paint must be applied at least twice.
If everything is done correctly - the repair will need to do not soon and the house will rely for a long time to delight the owners with a cozy interior.
