In this article, we will analyze frequent errors that allow novice furniture makers when designing a wardrobe. Sin himself, was noticed in a pair of them))
1. Error №1 this cabinet for the project is bivalve. Everything, it seems, is good, there are branches for clothes, shelves for linen and retractable drawers ...
But, put the two doors mentally in place, which will overlap each other in the middle of the cabinet. Those. The average section at any position of the doors will be open no more than half.
Correction options -making three doors if the wardrobe is allowed (we remember that the ratio of height to the width of the door should be no more than 1: 4). The second option is to make filling the wardrobe double-piece.
2. Error number 2.First, look at the left cabinet: everything seems to be all good again: two sections, two doors, but if you again mentally initiate a coupe system, then it turns out that the boxes when trying to put forward them will rest in the profile handle ...
Correction options- Making the left width compartment is less than half the cabinet, if you need to make the right section of a strictly fixed width (on the example, it is set to the width of the shoulders for clothes), then you can only narrow the section with drawers (see Fig).
3. Error number 3. Revonds again retractable boxes. In order from left to right. The bottom box will be from the floor by 3 mm. It seems that the gaps are taken into account, everything should work, but we apply the lower guide to the place, the height of which is 5-6 mm and everything ... The bottom box is not functional.
Correction options -raise the bottom box above the floor to a height of at least 15 mm (the second drawing), but in this case there remains a large slot. To level this defect to lay down under it "Pen" from a piece of 16 mm LDSP width 100 mm, we make an indentation of 3 mm on the opening and voila - everything works!
4. Error number 4.
It occurs when designing corner wardrobes. It lies in the fact that the calculation of the width of the door of the coupe is carried out by the width of the front edge of the lower horizon. 
With all the time, the length of the first track of the guide is less than the second, so the doors of the same width do not overlap each other.
Correction options -correct the door to the coupe correctly, you can use the article posted earlier.
I hope that considering this material, you will not allow such "children's" errors in the design of their wardrobes, and, it means that you will not have to redo anything. After all, it is not for nothing: "Some seven times and a rejection once!"
Radius corner cupboard coupe - non-standard solution To fill the corners in the room. They have a large capacity. In addition, side open racks complete the composition and add an additional place to store memorabilia and decor elements.
Cabinets such a design have many advantages, have features of internal filling, as well as design developments allow you to expand the range of available models.
The variety of models is distinguished by its peculiarities of the external and internal structure. However, the general advantages are traced in each model. radius. The strengths are as follows:
The largest minus such models of the wardrobes are considered a high cost. Due to the fact that the design has many complex elements and mechanisms, its assembly and installation may be accompanied by the difficulties of the process. An experienced specialist will solve any puzzles, so the assembly and installation should be entrusted with proven furniture makers. Some craftsmen are solved on independent installation And even assembling the cabinet.
In order for the radial wardrobes-complised by their own hands did not have a non-sustainable external view, you need to try well. For this, it is important to have some skills to properly draw up the personal scheme of the future cabinet and the calculation of the size. The most difficult thing is to calculate the correct radius. It is he who sets the radius of the top guide. Many factories and furniture manufacturing companies are offered to use the service. individual order All components of the cabinet. To do this, the master itself must draw up clear calculations for which furniture makers will be able to make and send all components of the design.
In addition to the "box" - the case of the cabinet, it is important to pay attention to other details and mechanisms. For self-assembly The cabinet from A to Z, the following elements will be needed:
Radius type is a carriage with the top suspension. It serves to move the door of wood or aluminum along the track. This mechanism includes the following details:
The profile for radius cabinets is a radius guide. It is made from aluminum under the order, taking into account the individual radius. Her goal is to provide smooth sliding rollers, attached to the ceiling of the cabinet. Maximum length Radius - 6 meters.
The carriage is made of zinc and aluminum alloy, its composition includes a bearing. For one door, you need two carriages. Purpose of such important details It consists in moving the door on the guide. The carriage has a feature - adjustment in height.
The stopper limits the movement of the door and fixes it in the desired position at a certain place of the track. It is made of a piece of plastic, and attached to the edges of the upper track.
The bottom roller is made of plastic, attached to the podium or on the floor. His goal is that the door does not swing, each door should be installed on one roller.
The first thing to do is to determine the calculation of the radius of the future cabinet. The corresponding size prepare the ceiling and the podium of the future product. The height, width and depth is measured, and the question of the number, size and radius of doors can be solved, which can be made under the order. Cabinet parts can be made of any kind of material: chipboard, MDF, veneer, natural wood.
When calculating, consider the following:
The drawing is performed on the scale of 1:10, and then transferred to the details of the genuine value. On the finished drawing to order the doors of the required radius and sizes are manufactured.
A concave or convex shape of the cabinet affects the shape of shelves and internal filling items. Some shelves can completely repeat the circuit of the cabinet radius. The angular cabinet most often has a "dead" zone in depth. To fill the place and use it rationally, in small cabinets in the corner itself, there are volumetric things and household appliancesFor example, vacuum cleaner. In large cabinets install dressing tables with make-up mirrors or sports rigging equipment.
The location of the wardrobe has a significant impact on the internal filling. For example, in the hallway in the closet there is a bulk outerwear, many pairs of shoes, umbrellas and other things. The wardrobe in the bedroom should provide a place to store underwear and other accessories, as well as large, deep and spacious shelves for bed linen, blankets and pillows. In the hall, the corner cabinet can move in a shaped form. Such a model is combined, it includes closed zone Storage of things and open rack. On the shelves can be stored books, decor and even a TV or music center.
For ergonomic storage of things, it is important to know and adhere to the established standards emanland from the average physique of a person:
When buying furniture directly from the factory there are two ways of delivery:
The cost of delivery of the transport company is paid upon receipt of furniture.
When ordering furniture from the factory, the assembly services are provided only in Penza and the Penza region. Residents of other regions recommend contacting a specialized organization in your city.
Each element of furniture is equipped detailed instructions Assembly. In case of issues, contact our phone or skype managers.
When buying glass showcases directly from the factory there are two ways of delivery:
In the photo - packaging of bent and straight winds that allow you to deliver shopcases in the destination.
Packing bent and straight glass
When buying a bedroom furniture Galant and Prima directly from the factory there are two ways of delivery:
When buying furniture for the kitchen directly from the factory there are two ways of delivery:
In the photo - Penal Packed and Kitchen Tumes, which allow you to deliver to you Furniture safe.
Penal Packaging Stage
Penal packaging
Starting stage of packing of the cabinet
Packing Tube
The classic option is the radius parts from chipboard or glass, which are attached to the side of the cabinet compartment and the rear wall of the chipboard. But it is possible to easily approach the design of the end of the cabinet. Consider the most interesting options.
Radius shelves are not made to the entire depth of the cabinet, and the rest of the depth of the sides of the cabinet compartment is used for the manufacture of Penal. Pencil allows you to create an additional closed storage area.
It is interesting to design the end of the wardrobe with the use of bent facades from glass and MDF. Moreover, it is possible to combine simultaneously bent and straight elements.
The radius of glass is actively used in the manufacture of the endings of the cabinets of the coupe. You can simply make several radius shelves and with the type of toucan type floor holders to fix immediately to the wall and side wall of the cabinet compartment.
Interesting option It is to make a small chipboard panel, consolidate it to the wall, and the shelves made of glass. We will result in light and original solution Upon registration of the end without significant material costs. By the way, using this reception, you can improve the design of an existing cabinet compartment.
False panel can be made not direct, but radius. It will be more expensive, but visually looks great.
An interesting designer reception when the rear wall of the radius end is made by two-layer, and the contrasting colors of the chipboard are used. Similarly, the roof of the cabinet compartment is done.
Interesting visual effects are obtained using the mirror in the manufacture of the back wall and the radii of the cabinet compartment.
Modern and cool looks backlighting the end glass Shelves End of the cabinet coupe. The clips lamps are usually used, as in the photo below.
The end of the cabinet is made in the so-called "classic" version, that is, the rear wall and radius are made of chipboard. The configuration of the radii and the rear wall can be different, some variations on this topic are given in photos.
 |
|---|
| Fig. twenty. Direct rear wall end of the cabinet coupe |
Not everyone likes the rounded forms of the outer part of the cabinet compartment. In this case, the end of the cabinet coupe is performed in the form of rectangular shelves, elements of cabinet furniture.
Sometimes the wardrobe does not remain "lonely" and is complemented by elements of cabinet furniture. As a result, a whole furniture composition is created and functionality is improved in terms of creating storage sites.
