When repairing, one of the important issues arising from each person is the question of choosing suitable wallpaper. Different models have different distinctive properties and characteristics, but it even more importantly, their sticking can also differ very much. Consider as an example how to glue vinyl wallpapers On the phliselin-based basis, the most popular lateral material for the walls has recently.
Fliseline-based wallpaper usually have a meter lengthHow good are such wallpapers well? Is there a choice of material correctly? Similar wallpapers are quite popular in vain, because they have a lot of positive properties.
Many of them are called simply vinyl, but here it is critical to understand that there are also other vinyl wallpapers, on exclusively paper basedThey differ from these wallpapers, including adhesive methods.
Flizelinsky base is generally somewhat more profitable than paper, because it possesses albeit small but real leveling properties. And let the wall without aligning the wall still do not do, almost all small defects will be perfectly hidden under the wallpaper blade.
Showcase with meter wallpaper in the store It should be said that such wallpapers are quite simple both in the installation and in everyday operation. During the sticking, the canvas themselves do not need to smear glue, there are no other problems with them when sticking on various surfaces. The durability indicator of these wallpapers is at a high level. Now you need to figure it out, how correctly and correctly blew like this canvases.
First consider general ruleswhich are taken into account when these wallpapers are glued to the walls. The main thing is that it is necessary to remember - the glue is applied only to the surface of the walls, it is not necessary to apply it to the wallpaper canvas. This allows you to noticeably simplify the workflow and spend less adhesive composition.
Powing is carried out by the method called "Shake into the joint", the seams will almost unrealicate, because the whole room will look like something holistic. From which angle to start gluing is not fundamentally, so you can choose any comfortable place.
To begin with, it is necessary to competently prepare the surface of the walls. If there are already available plinths without any special problems, it will be necessary to do this, as they will only interfere with the process, and the plinth can also be swap.
Carefully prepared walls, deposit of successful blowing wallpaper Next, the walls are completely cleaned from the coating, which was present earlier, we are not going. All enough bulk holes and cracks in the wall are closed with putty, after which it is left to dry. The walls are then covered by another layer of putty and is finalized by the soil. If you do not apply primer, the surface of the walls will absorb glue too quickly, because the wallpaper can not be labeled normally.
When carrying out work, the maximum accuracy is necessary When sticking reaches the corners, you need to take a lane of wallpaper for several centimeters (at least 3-5) wider than usual and bend it at an angle. After that, the cooled place is puzzled by a spatula.
If the wallpaper should also be placed and the ceiling, then general principle It remains about the same, but it is better to take a roller on a fairly long handle as the main tool for the glue surface. Previously, the surface is accurately repaired and gently put off. To work, it was most convenient as possible, it makes sense to build neat layouts so that with their help you can simply and conveniently get to the ceiling with your hand.
One person is glued to the ceiling wallpaper strip is difficult, but really It is desirable that the assistant helped you, because, unlike walls with a ceiling, it is quite problematic to cope with the ceiling. Ideally, one person will miss the surface with glue, and the other licks on it on a predetermined line (parallel wall).
Several tips describing how to glue vinyl wallpaper on a fliesline basis, with which the work will become even easier.
Room with fresh repair We hope that now you have some idea of \u200b\u200bhow to work with such modern material As vinyl wallpaper on a fliesline basis.
Wallpapers from Fliselin are considered hardly the best option for independent decoration walls in any room. They are not deformed after sticking, differ in a thick and stable basis, hygroscopic and practically harmless. But only if all the rules of use are followed, you can count on long service life.
Wallpaper on a fliesline basis is always wide (the width of the roll is 106 cm). This means that there will have to make less junctions, and the more important every connection, because it will be very insulting to fail the whole thing due to elementary inattention. These wallpapers are heavy and structural, differ in dense texture, so they are able to disguise defects different surfaces. Low susceptibility to the light allows you to avoid burnout - the surface does not water. Internal structure guarantees good breathing, canvas can absorb a limited amount of moisture and not to deform. Vinyl or especially paper solutions do not possess such dignity in principle.
Fliseline wallpaper attractive attractive because they are:
Before sticking phlizelin wallpaper, you need:
IMPORTANT: Take care of high-quality primer, otherwise guarantee the clutch of wallpaper with the wall will not be released.
For work you will need:
Measures and fitting are carried out using a level and long line. There is still a simple pencil, sponge, cotton matterium, water and, of course, the required number of wallpaper and flieslinic glue in the desired volume. If large repair is planned, and not just a blowing wallpaper, be sure to take laser levelnot hydraulic. The five-meter roulette is better than the three-meter, since it is much more practical. The roller must have a long pile, and the spatula is advisable to buy plastic, with soft edges. It will roll the wallpaper as it should.
Sponge should be taken foam. It will also necessarily need a soft brush, with its help you can smooth out the pasted wallpapers in the event of irregularities. Useful accessory - A grid that simplifies the cleaning of rollers from excess glue. In addition to the rubber spatula, one more, narrow with a metal blade is useful. It is also necessary to prepare two buckets: one under the glue, the other is under clean water (it is better to use plastic).
The first step in preparation for gluing fliesline wallpaper is inspected surfaces. It is easiest to glue on paper, clean concrete, drywall, chipboard and plaster, but only if these surfaces are perfectly smooth and in good condition.
Important: The coloring of the draft surface should be homogeneous and the corresponding tone of the wallpaper themselves, otherwise it will be shone through them, which will break all the aesthetics. If newspapers are pasted on the wall, they will have to be removed. Any defect is cleaned, dirt is cleaned.
Even the paint should be considered, if necessary, the fine bodies of the draft layer make sandpaper with medium grain. Then the surface is ground. The quality of fliesline wallpaper allows you to stick their jack, and the connected canvas almost do not allow to see the seam.
The rules for working with phlizelin wallpaper imply that sticking them from the corner. From there measured meter in length, and exactly vertically lead a line for orientation. Next, checking the level, such lines are placed on the whole wall. Since the typical roll width is 106 cm, an excess material occurs - this allows you to make joints at the corners.
Then there comes a turn of work with the wallpaper themselves. It is more correct to cut all the workpieces immediately.
An important nuance: Before the "cutting" measure the height of the room at different points in increments of 20-30 cm, and if the walls are uneven in height at least a little, consider it when cutting.
A large drawing can look very attractive, but it needs to be chosen with all thoroughness, without molding a mandatory coincidence in the process of marking.
The stock of 10-15 cm in height does not always help with a very high height of the ceilings, so the length of each workpiece should be made more than the height of the room. Cut the best on the floor itself, for this weep the polyethylene film; quality linoleum Or the laminate is enough to wash and dry. Rolls are rolled out facial side Down, measure the strip with a margin for fitting and marry it with a knife. Under this point, the canvas bend with such a calculation so that the ends of the bent fragment and the main panels are on the same line. Make sure that you can cut off the wallpaper special knife or paper scissors.
After rolling the subsequent sheets, they immediately check as far as the drawings are adjacent. It is most convenient to control it, turning attention to some kind of well-highly distinguished part of the graphics. Only after everything is combined, you need to work on the next workpiece. ATTENTION: Only specially intended glue apply for flieslin wallpaperwhich is thinned in a tank with water with a thin jet, while stirring constantly. The mixture should be arranged, then it is stirred again and choose lumps. This preparation is completed.
IMPORTANT: On the old wallpaper glued, new is categorically impossible, and it is not even in the special properties of phlizelin. For many years of operation, wall coverings inevitably absorb fat and soot, dust and soot, allergens and industrial emissions. Therefore, the correct path is only one - to clean the foundation to the perfectly smooth draft surface, and then prepare everything as described above.
The correct answer is simple: paste the fliesline wallpaper, if you smear them with glue, it will not work. So smear the wall glue, and only them is absolutely necessary. But if any of the bands already missed, then it is not necessary to cover the wall: just remove the excess glue with a soft cloth, which will perform on the joints. IMPORTANT: glue is applied only on that strip with which at the moment, not on all the cloths immediately.
The primer may not be used only in one case: Wallpapers are not initially expected to use long, and they act only temporary solutions, for example, before moving or appearing a more suitable wall covering. If not to primitive, then it can be found that the clutch of the material with the surface is insufficient. It is for this reason that the canvas often fall off suddenly, as if by themselves.
Start pasting recommended from door or window openingsand move deep into the room, and not vice versa. Always smear the wall not exactly in the width of the roll, and with some reserve. Especially carefully the sticker in the plinths should be carried out, in the corners, on turns and in places with a complex configuration, for example, where pipes are located, electric meters, suspended furniture, wall-mounted hangers are located.
Unlike ordinary, phlizelin wallpaper on PVA glued is allowed. The fact is that their dense, heavy structure makes standard wallpaper adhesives are not effective enough, but guided, ultimately, follows the manufacturer's instructions. As written in the instructions, it should be done. If you add polyvinyl acetate glue into the wallpaper (its consumption will be 150 g per liter of the main adhesive mass), the coating will hold more firmly.
Vancest Flizelin Wallpaper is glued in the corners, it allows you to visually cover the various irregularities and deviations from the norm. At the corners, there are corners from plastics that are fastened to the walls. ATTENTION: no need to "go" to neighboring walls. The technology implies that the roller after macania in glue is necessarily carried out on the grid, and only when the excess composition is removed, you can spend it along the wall. It should be glued at top, for this take the cloth over the edge and applied to the wall. Then roll smoothly lead down, smooth the cloth from the center to the edges with a special brush or roller. The plastic spatula can also be used, but it requires caution.
Watch not only so that the joints are not visible, but there is no bubbles, the folds somewhere. ATTENTION: After stickers of several bands, all subsequent seams are neatly rolled with a roller. If the extra piece remains at the bottom, it is cut off, but not immediately, but only after drying the canvas. On the exterior angles Wallpapers are glued with 5 cm. Then the line is applied to the middle of the strip and make through it with a knife.
Material wallpaper is more correct to glueBut it is impossible to pull the canvas too much or smoothing it over the measure. A thin strip can be easy to break, it will not work in any way. Caution: Use only a completely new glue every time. The remaining since last repairs or from yesterday is completely unknown.
It does not represent the difficulties of sticking phlizelin photo wallpaper, but still this work should be performed only if there is sufficient experience and knowledge. Customized pattern need with an error of no more than 1 mm. If you have never glued wallpaper at all, it should not be taken for such a thing. It is better to choose an option for painting, to use it easier and more reliable.
Simplicity sticker wallpaper on plasterboard only apparent, and without sufficient training even his smooth surface It will not simplify the task. All visible metal fasteners must be closed with an anti-corrosion preparation. Be sure to use acrylic primer, overwhelming the development of mold colonies. Important: Do not use too much oboy glueOtherwise, plasterboard sheets can be blown and deformed.
To eliminate the transmission of the base, the installation should be carried out not to the plasterboard itself, but on water-emulsion paint White tones. Note that glue the Wallpapers in this case is undesirable. Regardless of the foundation, it is worth turning off the electricity throughout the room, because the wet glue is an excellent current conductor.
It is possible to accumulate the walls with fliseline coating in the corners of the room without the help of specialists, but it is necessary to be more closely than when working with the main space. It is not necessary to apply a canvas to the same shares to both walls, because a similar strip is almost certainly stretching and breaking. If you put the point in the narrow part of the panel and spend a vertical line through it, the markup will turn out to be more accurate.
Sometimes still dare glue phlizelin wallpaper on glass. To appreciate whether to risk at all, see how relief drawing is applied to the estimated foundation. On top of the convex ornament, the new layer does not work in principle. Never glue fliseline on the paper basisBecause it will not cope with such a large load.
PART OF FLISELINE WALLS - Textile, their outer layer is formed by various tissues, for example, silk. It makes sense to choose a linen canvas, it is practical and relatively inexpensive.
The jute cover will help disguise even quite serious wall defects, and the felt is used when you need to decorate not so much how much to insulate the room and protect it from extraneous noises. Wallpaper from phlizelin on painted walls can be pasted with their own hands, but it will require thorough and verified training.
There are such ways:
The first option is both more familiar and more reliable, and by labor intensity methods are approximately the same. In addition, in the first case you are not mistaken, creating not those roughness, not where it is necessary, so the second method should be left to professionals knowing all the subtleties.
Independently wide fliseline wallpaper blew, in fact, no more difficult than narrower samples. There is no particular need to even carefully measure and calculate the door, window openings, more correctly just buy more material to make sure enough. Remember, in case the error will have to urgently acquire an additional coating, and it will not always be possible to choose into the tone of the already used.
It is necessary to strive for the fact that the wallpaper lay down without seams. Those home masters who can achieve such an effect can consider themselves almost professional repairmen. To avoid the occurrence of the seam, work with glue gently, it should not fall on the facial surface. Of course, in order to abandon the seams, you need to acquire a special coating that glues an approach, and not a mustache.
Wallpaper hot embossing with a bright pattern looks well only in those rooms where enough sunlight. In a darkened room (corridor, pantry), they are completely inappropriate. Note that most of these ornament has no ornament and is intended for further independent painting. Important advantages of hot stamping are that it does not accumulate static electricity and does not fear to enter water.
About how to glue phlizelin wallpaper, see the next video.
It happens that these or other problems arise when covering the walls, and then you need to act immediately to correct the defect. It is quite simple to stick the flieslinic wallpaper without bubbles, it is only necessary to not save glue, but to use it exactly as much as indicated in the instructions. Then no difficulties will arise.
With a general algorithm for sticking wallpapers with a fliesline basis, according to most specialists. They believe that this material It is one of the highest quality and comfortable. Currently, the wallpaper on the phlizelin basis is becoming increasingly popular.
The structural wallpapers on the phlizelin basis have the following characteristics and features:
Wallpaper on a flieslinic basis is made of eco-friendly raw materials. In addition, this material matches all sanitary requirements. It is used not only when decorative finish walls. Fliseline wallpaper blowing can be carried out on the ceiling. This material is often used to finish office and residential premises.
In this case, before starting the salary, you should make sure that the walls are absolutely smooth. Accordingly, there should be no cracks, tubercles or other surface defects. At the preliminary stage, all surfaces must be cleaned of the old coating in the most thorough way.
In some cases, to get rid of old wallpaper is not very simple. In order to facilitate this process, they need to be wetted. In this case, you can use water and ordinary rags. Thus, the wallpaper quickly softened. It is best to remove them with a spatula. It is worth noting that the surface of most walls in ordinary apartments is far from perfection. In some cases, it may even be necessary to repair. Thus, at the preliminary stage, it is necessary to make a putty of problem areas. It also concerns the corners. Then follows the primer. This can be done with a glue or a special solution for deep penetration. Only then it can be started to stick fliseline wallpaper.
How to glue the wallpaper Flizelinov? Of course, there is a certain technology. So how to glue the wallpaper Flizelinovaya can not be far away house masterYou should pay attention to the following:
Fliseline wallpapers can be blocked quite quickly and efficiently, if you clearly comply with certain recommendations. In this case, it is very important preparatory stage. This process is not difficult. First of all, the level alignment is required. As a rule, this is done with a putty. Next, the walls should be projected. Then you need to cook glue. Special compositions are produced for flieslin wallpaper. It is worth noting that the preparation of the foundation is best trusted by professional malarier plaster. As for further actions, they will be able to mask almost everyone without any problems.
Do not stand too trust the instructions that are specified on the packages. In fact, they do not correspond to proper practical application. The composition, which is preparing exactly the attached instruction, is excessively liquid. It is suitable for sticking light paper wallpapers, but no more.
An independent blowing of flieslinic wallpaper usually begins from one of the corners. It is necessary to follow accuracy. In the corners of the walls, the wallpaper should be pasted with a break of up to 2 cm. This place should be well linked with a solution. It is worth noting that phlizelin, which is the basis of such wallpaper, does not need to be pre-injected with glue. This, by the way, is one of the main advantages of such a material. We need to smear glue only. Thus, there is no need for the cutting of the roll into separate parts.
Material must be put on the floor. The roll must be unwinding, then glue the strip to the wall. It is recommended to carefully straighten the canvas. In this case, you can use a roller or plastic spatula. In order to stick the first strip, it will take a level. The canvas easier will be aligned if you draw an indicative line on the wall. In particular, this refers to striped wallpaper. The curvature of the walls is usually very noticeable.
It is worth noting that it is easy to glue the first strip. Subsequent may occur certain difficulties. This is due to the need to dock the canvas. Many are wondering how to make these places invisible. In fact, no difficulties will arise with this. The fact is that the wallpaper is quite well sliding on the surface, which is lubricated by glue. In order for the junction to become invisible, you need to attach a canvas to the wall. At the same time, it should be as close as possible to the neighboring strip. You can finally move them with the help of hands.
The position of the canvas may need certain adjustments. After the optimal position of the strip is selected, it must be thoroughly smoothed. Under the canvas should not be air bubbles. It is worth noting that such wallpaper must be correctly cut. This skill must certainly be seized. It is useful for the preparation of the canvas to ceiling baguettes. Initially, the cut line is formed. To do this, it is best to use a plastic spatula. It is pressed into the angle between the baguette and the wall. Next, you will need a knife and a flat line. With the help of them you need to cut the surplus of the wallpaper.
Classic paper wallpaper cause consumers a much smaller delight than modern decoration Materials. Manufacturers produce an extensive range of wallpaper products, among which fliseline products use in great demand. They have high strength, wear resistance, rich gamut of shades and textures and give the interior with an original highlight. But for the decoration of walls and ceilings was impeccable, you need to know how to glue wallpaper on a fliesline basis, correctly accumulate the angles and apply the glue composition.
The complexity of working with phlizelin material is the density of products. But this moment should not confuse anyone, because after a pair of glued bands, experience and pasting skills come. Vinyl wallpaper on a flieslinic basis is not necessarily smeared with glue, it is enough to handle walls or ceilings in the rooms. Important advantages of materials - high plasticity and thickness due to which you can hide minor base defects.
The main nuances, how to properly glue the vinyl wallpaper on the phlizelin-based basis:
Cut the material on the strips of the desired length is necessary after checking products for the presence of marriage and counting the lifting of the room. Domestic manufacturers produce rolls with a width of 53 cm according to the standard. Foreign companies offer consumers of a large width of 106 cm (meter) and non-standard size in 70, 90, 100, and even 140 mm.
On a note! Very high quality vinyl on a fliesline basis produces Germany, Italy, Belgium and France. The width and length of rolls varies, so when buying needs to pay attention to the size of the finishing material.
With the help of fliselin wallpaper, you can create a seamless effect on the surface. This is very valued, so finishing materials enjoy a big dispute.
The meter width is less junctions on the wall, but these are not the only advantages of flieslinic cloths:
The additional advantage of wallpaper is easy to care. They can be cleaned dry and humid way. If the room increases the level of humidity, the material is not stretched and "not sitting".
To give a room the new kind, update the design or implement a bold interior solutionThe ceilings and walls can be painted in the desired shade.
Checked! Flizelin wallpaper can be painted up to ten times. It is unlikely that someone wants to experiment so often with color, but three times the staining material withstands exactly.
The first rule that should be adhere to before purchasing a finishing material - the vinyl in the roll looks differently than on the baked surface. If you buy wallpapers in a specialized store, you can evaluate appearance Material in the samples presented on the stands.
How to pick up a meter wallpaper:
To get a visually solid surface without seams after pasting, it is better to choose a wallpaper with a foamed vinyl coating. Fliselinic materials have no shrinkage after drying, which greatly simplifies work with the finish.
There are no significant consumers on the wallpaper on the phlizelin basis. To get the perfect wall covering and ceilings, it is important to prepare a qualitative basis for subsequent pasting. It is necessary to align the surface if it has defects, and large cracks gently shine, pushing and sanding with fine-grained sandpaper after drying.
Some inconvenience of how to glue wallpaper from vinyl on a fliesline basis:
Fliselin canvases are obtained from cellulose fibers, so they are committed harmless to health. After applying the vinyl coating on them, the effect of the rugs of products is not excluded, which can be attributed to the disadvantages of finishing materials.
Specialists advise! There is a freezene and paper-based wallpaper on sale, which differ in characteristics, brake technologies and cost. How to check the multi-layered cloths? If there is an opportunity, you need to tear a small piece of wallpaper and see how many layers it consists.
One of the advantages of flieslinic wallpaper is that the canvases themselves do not need to miss glue. It means that it does not require additional space to accommodate wide strips.
To independently cale the room with meter wallpaper, you need to prepare in advance required tools And the materials for work, the list of which is presented below:
Listed tools and materials that are required not only for sticking wallpaper, but also for high-quality preparing surfaces under the sticking.
For the final finishing of the room, you can buy a decorative plinth or a corner of plaster, polyurethane foam, polyfoam. It gives the room complete view and hides the docking seams between the canvas on the wall and the ceiling.
Masters recommend! With the help of decorative fragments, you can hide insignificant wallpaper trimming defects. Therefore, glue plinths and corners are easier after sticking the canvas, and not to start the wallpaper with a spatula under the already glued trim.
The base under the flushing wallpaper should be carefully prepared. Ignoring this moment leads to a rapid lag of cloths, breaking the material in places of cracks and aesthetically unattractive view of the room.
The preparatory stage is the most difficult and takes a lot of time:
Perfectly smooth walls create good base For shook wallpaper. If you do not use the primer, the part of the glue is quickly absorbed into the surface, and the wallpaper will be worse worse. From how qualitatively prepared preparation, the durability of the finish depends.
Attention! The primer on the walls and the ceiling should dry well. Time of complete drying is indicated on containers with primer composition.
Ideally, all measurements need to be held before the purchase of wallpapers, as it is easy to make it, using a tape measure. If the material is already purchased, it remains to cut the stripes.
How not to be mistaken in the calculations on a specific example, if room dimensions 4 * 5 * 2.5 (length, width, height):
For stacking walls in the room with dimensions 4 * 5 * 2.5 meters, you need five 10-meter rolls of fliesline wallpaper width 106 cm. In this case, you need to buy one roll more for the walls of the walls above the door, above the windows and under them. The material is cut into strips of the required length (2.65 m). By the same principle, the consumption of material on the ceiling is calculated. The length of the strip takes the distance from the wall with windows to the opposite side. If the wallpaper is drawn, each strip is customized under the previous, thoroughly combining pattern.
As an option, you can glue a meter wallpaper on a fliesline basis, straight from the roll without cutting.
After preparing the required number of paste bands, you must apply marking. The vinyl wallpaper is started to glue from the window opening. With the help of a plug, check the checkpoint and spend the vertical strip. On the ceiling markup starts from any edge perpendicular to the windows, because the canvas need to glue the jack. In rare cases, the strips are placed along the length of the room, then it is convenient to place the surface from the windows.
Important! In order for the day lighting, the walls of the wallpaper should not be seen, the strips glue perpendicular to the windows. But if in designer idea The wallpaper pattern on the ceiling must pass along the length of the room, you can glue stripes along the wall with windows.
For vinyl wallpaper, universal formulations are chosen or special means For materials on a flieslinic basis. Before mixing the product, it is necessary to check the compatibility of glue and wallpaper, as different compositions are suitable for lightweight, heavy, dense samples.
How to cook glue:
The composition is applied only on the surfaces of the surface, but so that the wallpaper is tightly on the ceiling, the canvas themselves can be missed. It is worth adhered to this recommendation in the hot season, since the adhesive quickly dries on the wall.
Attention! It is impossible to disrupt the proportions of water and glue, indicated by the manufacturer on the packaging. Otherwise, the mixture is inconsistent with the consistency and loses its adhesive properties. It is better to use freshly prepared glue.
How to glue wallpaper on a fliesline basis, every wizard will discern, since there are no fundamental differences from the traditional technology of work. It is necessary to remember that it is not necessary to apply glue to the bands, except for pasting the ceiling or repair at a very hot season.
An important condition that must be observed is to exclude drafts so that heavy canvases do not lag behind the surface.
How to glue wallpaper on a fliesline basis correctly:
In order to smoothly cut the cloth, a wide spatula is applied to it and it is neatly a knife with trimming. Products with a pattern are measured immediately, carefully customizing the pattern, and the excess is cut off so as not to confuse the arrangement of the ornament. Since the stripes are glued, before fixing the next strip, the edge of the previous canvas is not smeared.
Master Council! While the glue does not dry completely, you can not open the windows or swing the doors. If such a situation turned out to be inadvertently, the canvas are immediately lined.
On video: Master class sticking wallpapers on a fliesline basis.
Each room has places causing some inconvenience when finishing with wallpaper. These are angles (and they are often uneven), door and window openings, niches or arches.
How to glue meter fliesline wallpapers on complex areas of walls and ceilings:
2. Door or window opening. If one-photon wallpapers or instances are used without selecting a pattern, gluitive them easier, as you can skip the site over the doorway and then take it into small fragments. When the wallpaper from vinyl on phlizelin with a pronounced pattern, the drawing will have to be combined immediately, not passing the area above the door or under the window. The band is carefully measured, cut out the place for the window / doors in it, and glued to the wall, combining the ornament.
3. "Drown" or detachable angle. If such a plot in the room is located in a prominent place and attracts attention, it is impossible to do the outstretten. How to glue vinyl wallpapers based on Flizelin in this case? The band is set on a adjacent wall for 2 cm, but the science will be unequal. In the narrowest place, the casualties retreat from the edge to the angle of 1 cm, after which they measure the width of the roll from this point and spend the vertical line. Fall in the uneven corner will be approximately 1 cm, but will not be very noticeable.
Some masters when pasting uneven corners Use double cutting method. How to glue phlizelin meter wallpaper in this case: paste two strips with a large flax in 5 cm, heavily indulging them into the angle; With the help of a rigid profile, the wallpaper is cut in the center of the corner vertically, the edges are cleaned too much, the edges of the bands are lubricated with glue and stroke the roller.
On a note! In places setting outlets and switches, wallpapers glued, as usual, but marked the location of electrical devices. In the noted lines, cuts are made, bend wallpapers inside, and after drying the glue boxes are mounted in the same place.
An important advantage of vinyl - compatibility with paint and varnish materials. Wallpapers on a fliesline basis are often glued as a base for further paintwork. The type of paint is chosen in accordance with the instructions specified on the package.
Staining nuances:
Fliselinic canvas can be painted about ten times. It should only be borne in mind that painted walls and ceilings have low vapor permeability. Usually consumers paint rooms, water-plated, no more than three times.
NEW! There are freezelin photo wallpaper on sale, which are interested in interior design. With a large-scale image, you can transform a living room or bedroom. The technology, how to glue phlizelin wallpaper on the wall, does not differ from the standard process - surface preparation, glue preparation, sticking strips. The only nuance - if the photo wallpaper does not fit completely, the drawing is placed in the center and cut the canvas along the edges.
Working with wide vinyl products does not require special skills. The material is well glued to walls and ceilings made of concrete, drywall, wood. You can cope with sticking alone, but it affects the speed of work.
Independently wide strips are more difficult to glue than with an assistant, but it is possible.
If the cloths are lagging behind or fall from the ceiling, there may be several reasons:
Wide vinyl canvas decorate the room, creating the effect of a solid artistic composition without junctions. The process of pasting is not fundamentally different from standard technology, you can perform work yourself. To get the desired result, choose high-quality wallpaper, glue and well prepare the walls and ceiling to pasting.
Fliselin is a material from cellulose fibers that are fastened with a polymer among themselves. This is the so-called "improved paper", because it is more durable and resistant to abrasion, with high levels Fire resistance. Fliselinic are often used under painting. Painting them several times, you can quickly update the interior in your home. How to glue phlizelin wallpaper? This topic is devoted to the article written by our expert.
The advantages are:
Disadvantages:
If you are wondering how to properly glue phlizelin wallpaper, we recommend reading the article to the end and prepare everything you need for pasting.
You will need wallpaper, spatula, roller or brush, special glue, brush, plastic corners and levels.
Preparation begins with removal from the walls of old wallpaper, dust, as well as eliminating surface defects, deleting the paint layer. At a minimum, it is worth treating the painted surface of the middle caliber sandpaper, and then the primer.
Fliseline wallpapers have high-quality edges, therefore you can glue their "jack". Pointers that are located nearby look like single cloth. Such wallpaper more often produce widescreen, because we will tell about sticking wide wallpaper. It is recommended to start working from the corner of the room. From the angle, using the level, swipe vertical lines on a meter distance from each other.
When sticking, try to stick to these lines. Wallpaper Width is usually equal to 1.06 m, therefore there is a 6-centimeter reserve that is useful when the joint in the corners of the room.
When the wall markup is ready, prepare the wallpaper. It is better to cut the blanks on all the walls in the room. The degree of complexity of this work depends on the drawing on the wallpaper, if it is not, there will be no difficulties. Before cutting the workpiece, measure the height of the wall at its various points (for example, every 30 centimeters). When you make sure that the height is the same on all walls, make a "cutting" wallpaper blanks of the desired size.
When sticking wallpaper with a large pattern, pick it up: In the course of the markup, follow the matching of the drawings. It is important that there were no errors and did not have to play pieces of wallpapers above the floor or under the ceiling.
Use special glue (it is thick usual, does not leave yellow spots after drying). For vinyl wallpapers, it is better to use glue, which is designed specifically for heavy wallpaper. Pay your attention to the labeling on the packaging, as well as on the recommendation of the manufacturer's company, so as not to be mistaken in the choice of glue.
How to glue phlizelin wallpaper? Here step-by-step instructions By sticking wallpaper.
Maximum attention during sticking should be given to the corners in the room, thoroughly missing them with thick glue. It is recommended to use plastic cornerswhich can be attached to the wet splock to get a neat result.
If bubbles appeared in the process of sticking, move a piece of wallpaper from the wall and stick it again, carefully placing the surface.
If the bubble arose after drying the fliesline wallpaper, then you can take a thin needle and pierce the place of its appearance. Then you need to crush the surface with a spatula and pull the wallpaper.
It is possible to enter glue under the wallpaper with a syringe, they will provide the desired density of the wallpaper fit to the wall to disappear bubbles.
When drying wallpaper, humidity and temperatures in the rooms are important. You can not allow sharp drops of moisture, sharp movements of air masses, because at the time of drying it is necessary to close all the doors and windows.
The use of heaters when drying is inappropriate, it is better to dry the wallpaper with a natural method with well-working ventilation.
If you have purchased washable wallpapers based on flazeline, then the roll indicates the degree of their protection against water.
The symbol of 3 waves - evidence that the wallpaper is not scary moisture, they can be wiped with a wet rag, a symbol of 1 wave allows you to wipe them with a damp cloth, a symbol in the form of a brush - you can wash with.
It is not allowed washing relief wallpaper.
When sticking from above on the wallpaper layer, an old cloth can open. In addition, the color is possible, especially if the bottom layer is darker. If you remove the layer of old wallpaper and leave the base on the wall, then sticking the new web is appropriate only when the base is firmly held. By type, they must coincide with new wallpaper.
Do not leave the basis of the paper if you wish to stick the wallpaper that do not transmit steam, for example, if metal included in their composition. Walls with applied oil paint Or varnish - inappropriate coating for fliesline wallpaper. If you pasted something on them, do not hurry to remove the old layer of the coating, it is better to stick a new layer of wallpaper on top of the old, making sure that they reliably hold.
There are special safety in stores to replace wallpaper, which can be applied to a dry surface before sticking, then after the end of the service life it is easy to remove them. Due to the composition, the agent without difficulties penetrates the structure of old wallpaper. They can then be removed without wetting the wall, in dry form.
When removing old phlizelin wallpapers, take them for the edge (for example, near the plinth) and slowly separate from the substrate. It is not necessary to lubricate the wall at the same time, the front layer will donate entirely or strips. If the base holds well, damage is not detected, then new canvases can be glued on top.
If it began to peel out the foundation by pieces, and the upper layer is impossible to remove in some places, then you need to remove 2 layers of the whole, otherwise the basis for the new finish will be low-quality.
After crossing the fliesline wallpaper several times, you can quickly update the interior in your home, without making high time, forces and means. We hope our article will help you with it!
