House, design, repair, decor. Yard and garden. Do it yourself

House, design, repair, decor. Yard and garden. Do it yourself

» Vased options for flowers from the pipe. Vase do it yourself: photo instructions for creating from various materials How to make a blank outdoor vase step by step

Vased options for flowers from the pipe. Vase do it yourself: photo instructions for creating from various materials How to make a blank outdoor vase step by step

What makes our dwelling truly cozy? Of course, pleasant and stylish little things! An important element that complements the design of your apartment or at home can be floor vases.

And here you have good news for you: it is not necessary to spend a bunch of money on expensive design new items. Outdoor vases can be made own hands, and from quite ordinary raw materials!
Today you will learn how to make a beautiful outdoor vase from sound material It is easily and high quality.

Ready to create? Then we went!


Outdoor vase do it yourself from the bank

Sometimes you can create the most unusual things from the simplest materials. Look at this vase, moths would you think that the basis of all three-liter banks served as the basis for her? The same!

Admit, wanted such? Then get the stocks of creative energy from pockets and forward!


To create an outdoor vase from three-liter cans you will need:

  • Two banks with a volume of 3 liters;
  • One tea saucer;
  • One plastic container from canned food;
  • PVA glue;
  • Cardboard pallets for eggs;
  • Silicone glue "Liquid nails";
  • Acrylic paint;
  • Decor elements on your choice;

Step No. 1.

Create the basis of our vase. To do this, we take two jars, fasten with silicone bottom glue, and we glue the bottom saucer to the neck of one of the cans. It will serve as a steady leg for the future masterpiece.

Then cut the plastic container from canned food and secure it on the neck of the upper jar on the glue.
Leave to dry during the day.

Step number 2.

During this period, we can soak pre-grinding cardboard pallets for eggs in water until completely distinguished. After that, the cardboard should be carefully squeezed and mixed with PVA glue until a homogeneous mass is obtained.
We appreciate the basis of our vase with a uniform layer.
We leave for two days.

Step number 3.

After the workpiece is completely dry, align the texture of the alabaster.

Step number 4.

In this form, the vase is completely ready for the final stage of the finish - decor. Use your own fantasy or tips that we will lead below.

Outdoor vase with their own hands from plastic bottles

Another chic Option Required garbage use. Do not throw away plastic bottles, you can create real masterpieces for home!

Floor vase from plastic bottles can be made in different styles. For example, excellent option A conventional five-liter bottle with a cut neck, wrapped into a thin birch bark.

Idea: "Dress" plastic bottle In a stylish "sweater" with crocheted or needles. Such know-how will pleasantly surprise guests and fill your home comfort and warmth.


Floor vase from cardboard and papier-mache

Yes, yes, you are not mistaken, you can also make a stylish floor vase from cardboard. From expensive designer, it is not distinguished, just believe me. And if I can not believe, see yourself.



To create an outdoor vase from cardboard, you will need:

  • Cardboard tube (you can take from under a linoleum roll);
  • Thin cardboard;
  • Termoklay;
  • Newspapers and egg trays for papier-mache;
  • Polymer putty;
  • Sandpaper with small deposition;
  • PVA glue;
  • Acrylic lacquer;

Step No. 1.

Apply to a cardboard basis, a pipe and shaft form for the future vase. We make 30 identical templates, cut out.

Step number 2.

We glue the cardboard blanks to the pipe, evenly distributing them around the perimeter. We leave for a few hours until complete drying.

Step number 3.

We glue the base of the vase by pieces of newspaper sheets in several layers.

ATTENTION: The paper layer must be dense enough so that with the subsequent finish of the emptiness they were not viewed.

Step number 4.

We discharge the pallets for eggs in water, press and mix with PVA glue. We apply a uniform layer on the basis, we give to dry.

Step number 5.

Fracture a vase with a shpatle "uniform layer. When the mass serves, align the texture using the sandpaper.

Step number 6.

Decorating the vase. It is convenient to do with the help of aerosol paint of any color. On top it is possible to finish in the decoupage style, stucco or apply the ornament by manually using acrylic paints.

Step number 7.

Cover the surface with acrylic varnish, leave to dry.
That's all tricks. Floor vase from papier-mache and cardboard with their own hands ready. Enjoy!

Floor Vase from Pipe

It's completely simple here. If, after repair, you have unnecessary plastic or cardboard pipes, do not hurry to send them to the emission, it is better to make a wonderful vase from them.

Stylish outdoor vase from the pipe with their own hands is easy, practical and beautiful.

Just wrap cardboard or plastic pipe Newspapers, fixing them on PVA glue, paint acrylic paint into white and decorate.

Idea: For the decoration of the floor vase from the pipe, use old categorous stockings. Examine them in PVA, look carefully, and then put on the prepared pipe. Distribute over the entire area, creating curly folds. Give the workpiece to dry, and then color and decorate to your liking.




Outdoor vase from newspaper tubes with their own hands

The currently fashionable weaving technique from a paper vine allows you to create adorable crafts from the cast material.






In order to make a chic wicker floor vase with your own hands you will need:

  • Newspaper tubes (about 400 pieces);
  • PVA glue;
  • Scissors;

Stages of work:

  1. We carry out cross weaving 4 × 4, then fix one tube around. This will be the basis of our future vase. Further, we perform seven rows of ordinary circular weaving around the base, gradually spreading along one tube.
  2. After that, we begin to bring the walls of the vase, bending and intertwined diluted tubes. Moving up, gradually expand the space of the product to 22 rows inclusive.
  3. Further weave evenly without breeding about ten rows, cover the product with varnish.
  4. Then the weaving continues, narrowing the rows and tilting the tube inside the product to about 72 rows.
  5. Expanding the neck of vases for 12 rows and we complete weaving the creation of ports in 3 rows. Cut the remains of the tubes.
  6. Covered the product with a thin layer of PVA, waiting until complete drying. Then the final stage of the finishes is a lacquer coating. This should be done several times in a row.

Decor of the floor vase with their own hands

Options for decorating an outdoor vase can be mass, the most trendy of them: wrapping the twine, decor with a glitter, silicone glue, as well as an old good decoupage.

Of course, to decorate the vase should be in accordance with the style of the room, from this will depend on the method of its external finish.

Well, since our beautiful vase is ready, we can think about how to fill it.

Please note that not all kinds of homemade masterpieces are suitable for living bouquets, and therefore, we will also make flowers for outdoor VAZ with your own hands.

Creating an artificial bouquet, use the most ordinary branches of the tree. It looks very beautiful and natural. At the same time, an Eco-style vase for greater harmony with a bouquet can not even be painted.
Attach balls to branches from remnants of knitting threads - excellent and economical option For needlewomen.


In any case, decorative branches for outdoor VAZ do not leave fashion for a long time. So boldly use them in the decoration of our own housing.

No matter how the fashion did not change, the needlework is always in trend. Remember that from the simplest and most cheap materials you can create masterpieces of design art. The most important thing is a fantasy and a creative approach to business.
Outdoor vase with their own hands is easy, beautiful and stylish. Create and inspire.

Good luck!


Outdoor vase with their own hands: Secrets, technicians and unexpected decisions Updated: April 23, 2018 by the author: dekomin.

If at home you have recently recently done the repair, then a bunch of unnecessary garbage and our advice always remains: you can always throw it into a garbage chute, in this heap can always be stumbled upon items that will be useful in the invention of fakes - it can be different design details and Different scenery of your home. Most often the extra objects are the remaining nobody the necessary pipesFrom which you can invent an excellent designer vase. There are several methods for playing our vase.

So, first consider the types of vases from plastic pipes.

Installation

We will decorate with the help of unnecessary kapron stocking.


But before using stockings, we will get acquainted with the creation of a silhouette of a vase with the help of pipes from plastic. It would be great if these pipes were intended for sewage. They fit perfectly in shape and material.

We now turn to the manual that will describe the sequence of work and actions:

Composite decoration for vase

The sequence of actions is practically no different from the first embodiment of the invention, but there are still a small difference and it lies in the fact that the ways of decoration are different.

We now move on to the process of the invention of vases by this method:

  1. We wear on the pipes that we also prepare, as in the first version, stocking products from two sides so that the middle of the pipe remains a small empty gap.
  2. On this empty gap, we apply a small amount of PVA glue so that it is smeared throughout the plot.
  3. Now we fade in this smeared gap with a corpse of any type, then depending on your imagination.
  4. Let's wait until the glue is freezing, and attach the segments of pipes with each other and paint into different colors depends on your wishes.

At this stage, we finish the manufacture of vases using cereals.

Making a vase from a metal alloy pipe

In case you have left unnecessary metal pipewhere the edges are cut smoothly, it will be useful to create our craft. If the pipe has an edge, then it is perfect for us because it will not be necessary to create a stand for a vase, it will immediately be ready.

Using this type of pipe, we will get acquainted with its creation technique with consistent actions:

  1. To begin with, we will take a roll of ordinary cheap toilet paper and prospect our pipe in a circle so that no empty gaps remain. The formation of small folds is allowed.
  2. Now we need black paint, and with its help we stain in the pipe in two layers, to give naturalness.
  3. Next, we take powder with the effect of powder and put it with neat movements over black paint.
  4. For special beauty you can decorate a vase with a bead or beads.
  5. With the help of foam for mounting, we create the bottom of our product. We do it in this way: we put the craft on the stand from plastic and the foam stream we put in a vertical position. After waiting until the foam dries, it is allowed to dye the bottom of paint from the canister of any color.

Take note! We can embellish the edges of our beautiful vase with a welding device, some of them weld. As a result, there will be beautiful metal lace.

I hope you understand that in such a kind of vase it will not be possible to put live flowers as they require water, but it will not be able to pour it into such a craft, but do not be discouraged, it is perfect for the placement of dry or non-residential colors of various varieties. In it, they will look aesthetic and tasteful.

Making a vase from a cardboard product


If you have ordered the desired amount of linoleum during the repair, we note that the cardboard tube lies inside each such roll so that he does not get rumbling and did not go away. But for the end result,

you just need to show a bit of your imagination.

Useful advice

If you want to decorate the interior, then start with a simple craft, for example from a vase that can be made from old plastic or glass bottlesusing paper, twigs, tubes, newspapers and magazines, and many other materials.

There is a huge number of master classes for the manufacture of VAZ with their own hands.

Some of the most interesting And at the same time pretty simple VAZ you can find here.


Paper vase with her own hands. Kaleidoscope colors.



Ordinary glass jar Or a bottle can be turned into a colorful vase. For this you only need to glue the container with small pieces corrugated paper different colors.

It is better to use a transparent glass container, and for the gluing paper, it will help either special adhesive for decoupage, or ordinary PVA glue, which needs to be dissolved with water in a 1: 1 ratio.



Web bottom vase:

Make 4 beams of 4 harness

Fold all the harnesses crosswise

In turn "Run" each harness in a circle so that he wraps the rest of the harnesses

In a similar way, the first 3 rows are watered. After that, four harnesses need to be divided into pairs and always familiar to another 3rd row - you must already have 6 rows of weaving

Wrap each harness individually to get such a bottom:



3. Weave the walls of the outdoor vase:

Sticking paper tubes need to get up

Start sweeping each phone - you have to form a leg of a vase

Prepare a cover from a pan or any other object in the shape of a disk is wider than the bottom of the vase

Insert the lid between paper tubes

* The lower the lid, the wider there will be a vase.

Using the already familiar technique, another 10 rows should be wees

Now you need to start closing the edges of the racks - prepare the neck vase

Zelyushko Vases must be fattening until you reach the stage when you need to flick two rack harnesses, instead of one

Now again, spread the harnesses to the sides and start weave the cut of the vase

In turn Start bending one rack for another

Of course, in the design of the room the main goal plays the finish. But at the same time, you should not underestimate the importance of the decor. After all, it can be focused on the selected style, give the comfort of a room or another room, or simply fill the empty space. Especially original in the room there are decorative products of its own production. For example, large outdoor vases made by their own hands will help you manifest individuality and feeling of taste in design.


Outdoor vases: Rules of choice and decor

Regardless of whether you acquire a finished product or want to make it yourself, it is important to clearly understand what style you need to stick. After all, the room should be as harmonious as possible. And this is achieved not only by the choice of furniture, but also a suitable decorative design.


If you adhere to minimalism, the most successful solution will be a vase with laconic forms with minimal finish. Concerning color Gamma., it must be restrained. Classic white, black and red in this case will be the most suitable. However, if you purchased a transparent vase, you should not be upset. After all, it can be painted acrylic paints.

Classic style in the interior like not every person. But if you like it, then you will probably know that the decor can be not only with a pattern, but also the most laconic. Therefore, choose such a vase that will emphasize your room or the house as a whole.

It is impossible not to mention the modern style. This is a rather interesting direction that is becoming increasingly popular. In this case, you can safely choose a vase from the tree or with a metal finish. It looks like this design is amazingly beautiful, but at the same time restrained.

Amateur avant-garde know that this style assumes the presence of an unusual form in the room. Look at the original design vases. Often, similar options are presented in specialized stores. If you wish, you can even turn into a decor to turn into a decor, which perfectly fit into such a room. It's just enough to paint it with bright colors inside or outside. But in this case, it is necessary to leave it for a day until complete drying.

Decor of the floor vase with their own hands

Of course, outdoor vases differ from the usual sizes. Often these are quite large products. Therefore, it can be difficult to make them. In this case, we recommend paying more attention to the decor. This requires no less effort and fantasy. But be sure that the result is really worth it.


Perhaps the easiest way to reorganize the vase is to paint it with acrylic paints. To do this, you will also need varnish, brushes and tape or stencils. Before work, it is necessary to protect the working surface, so we recommend putting paper sheets on it or the newspaper. Only after that you can proceed to work.

First you need to paint the vase in white. This will create a kind of background, on which the pattern or decor will be highlighted much brighter. If necessary, you can apply two or three layers. Also, it is necessary to wait for drying so as not to spoil all staining. Next, apply stencil on the Vase or glue the tape by vertical lines. Intermediate space color contrast paint. After the stencil or scotch can be removed, you will get a really stylish and original vase.

Recently, the eco-decor has become quite popular. Each can issue in such a style. To do this, you just need to prepare smooth cuts of branches. Processing their sandpaper so that there are no roughness. After that, you need to glue them on a vase in an arbitrary order. Agree, the process is quite simple, but the result is worth it.


Pretty unusual design Outdoor vase always looks winning. In this case, we recommend using coins. Of course, it is pre-prepared to prepare a vase. That is, to paint into a suitable shade and wait for complete drying. Only after that you can proceed to the next step. Using a small amount of hot glue, fix the coins on the surface of the vase, making small indents.

In fact, for this you can use pieces of mirrors, small pieces of wood, mosaic, shells and much more. It all depends on your imagination and readiness for experiments.


If you are looking for a simple variant of the design of the vase, then use the twine or not too tight rope as a decor. Simple wrap them with a vase and fix glue. Despite the ease of execution, such products always attract attention and cause guest questions.


In the cold season, the thematic decor looks great. To do this, you can use an unnecessary knitted sweater. Depending on the size of the vase, do trust the sleeve or other part of the sweater. If necessary, you can sew part of the part. As a result, it turns out a very beautiful, cozy decor for an outdoor vase with their own hands.

By the way, it is not at all necessary to decorate the vase outside. Fill the transparent product with sand, shells, various branches, pebbles, or even beads, wine stoppers. Each options looks original in its own way. Often, sticks, artificial flowers or twigs of cotton are installed in such vases. You can also decorate the composition of the garland. In the winter season, such a decor looks amazingly beautiful.

Outdoor vase in the interior









Everyone can arrange an outdoor vase. This does not need special skills, experience or knowledge. Inspire ideas, view various master classes and be sure to try. Only so you can create something really worth.

Tags:

Reading time ≈ 11 minutes

Production of a vase from the girlfriend with their own hands is a great way to use time and pleasure to pass time. So you can give the second life to unnecessary things, get the original thing for home and transform. Consider several uncomplicated master classes for the manufacture of VAZ from the household of tin cans, glass bottles and vessels, other tanks.

Examples of Vaz do it yourself.

Materials for decoration

Lower the proposed master classes independent manufacture Vases will be involved the materials that you will most likely find at home, and only a small part of them may have to be purchased. Of course, we are talking about the decoration of the finished waterproof vessel, as it will be used independently to make a rolling vase for most will be an unbearable task.

You may also be interested:
To decorate a vase, you can use a lot of materials:

  • textiles of all kinds, textures, colors, including ribbons, yarn, ropes, burlap;
  • buttons, beads, beads, sequins;
  • color (fitted) tape;
  • staining enamel, sequins;
  • coffee beans, cereals, seeds, large salt;
  • natural vegetable materials: twigs, chestnuts, acorns, leaves;
  • sea shells, natural pebbles;
  • kraft paper, cardboard;
  • clothespins;
  • coins.

Materials for needlework.

For fastening, it is best to use transparent glue, which when drying does not give a shade and does not paint materials. And a large set of tanks will be suitable as the basis, which do not let the water:


If you are not going to put alive cut flowers into the water in a vase, then the product can be from the water permeable material (a cardboard basis, for example, a coil or reel).

Cardboard bobbs.

Vase from jars and twigs

To create a vase, you will need materials that you will probably find at home:

  • glass pot of 0.5, 1 or 1.5 l;
  • twine or thin rope;
  • a small cut of burlap;
  • chopped twigs of small diameter (about 0.5 cm);
  • glue.

Tip: Glass jar can be replaced by any other cylindrical capacity.

Phased production of vase from the twigs.

Phased production:

  1. Cut the collected sprigs with a knife on the segments of the same length. They must be similar to the height of the glass container.
  2. With the help of the twine, secure the twigs in the upper and lower ends, tie the twine on the nodes. According to the result, you should get a kind of canvas from the twigs.
  3. The segment of burlap, in length is equal to the circumference of the can, you need to wind onto the vessel, the upper ends wrap the banks inside and glue. Neat bottom can be left free.
  4. Next, the blade from the twigs must be turned around the tank and tie to the nodes.

Alternatively, you can not use burlap, but to plant sprigs on glue directly to the jar. In conclusion, it is advisable to build a rope wrapped around the jar in several turns. The product will look as decorative and aesthetic, as in the version with burlap.

Ready product.

If you use not thin twigs, but thicker segments, the vase will get a coarsest execution, but no less original:

Another product option.

When using jute

This master class also need to use a glass jar or a bottle. We will also need:

  • glue;
  • the twine, jute or other beautiful rope, also suitable rope.

Decor from the twine.

Manufacturing step by step:


According to the result of the work done, it will be such a concise and spectacular vase with their own hands from the remedies:

Ready product.

With sufficiently impressive size of the vessel, the vase can be used as outdoor.

Painted Bottle Vase

This master class is also very simple and will take you no more than half an hour. Necessary materials:

  • glass bottle from under any liquid (mineral water, champagne, dairy products);
  • universal aerosol paint of the desired color.

Painted bottles.

Step-by-step process:

  1. Wash the bottle inside and outside, remove all labels and traces of glue.
  2. Snap a bottle on a metal or wooden rod, turn over - it will be a kind of support.
  3. Now the container can be painted. It is advisable to use paint in a canopy for a uniform and homogeneous layer without smears.

To get a geometric or any other pattern, pre-cut the strip from the adhesive tape (other figures) and stir up to the container before painting.

For a more festive and elegant look, you can use sparkles of the adjacent shade. With the help of paints and sequins, it turns out to create very spectacular ensembles.

Decor with sparkles.

Sequins can not cover not entire vessel, but only its part:

Partial decor.

There is another version of the staining of the bottle - from the inside. To do this, you can use paint in banks. Also need a metal baking sheet and grid. Bottles need to be prepared, further pour into the small amount of paint and gently distribute it along all the walls, turning the bottle. To dry out the vessel you need to flip over the bottom and leave for a day.

Staining bottles inside.

Vase of clothespins and tin

The next vase is suitable for a miniature bouquet of gentle colors. For the manufacture you will need a tin can, a set of clothespins.

Tip: In order for the vase to be neat, it is important to use a small height can, the walls of which will be able to completely hide under the clothespins.

  1. Clean the bank from contaminants, remove the label.
  2. Clothespins tightly put on the walls of the jar. For reliability, you can use glue. We recommend for the manufacture of a vase to purchase a set of monochrome wooden clothespins - they look as aesthetic as possible.

Manufacturing process.

The finished vase can be reeded with cuttings or stickers. In fact, it is not quite a vase, but rather -. Inside such a stand can be placed glass glass With bouquet.

Finished vase.

Vase for artists

You can make the next creative vase in 20 minutes, the main thing is to have all the necessary materials at hand:

  • any cylindrical capacity that does not transmit water;
  • durable glue;
  • packaging pencils / markers / tassels.

Decor and pencils.

The photo shows that for the manufacture of the vase, the capacity must be carefully and tightly punctured with pencils. For beautiful view It is advisable to use a pack of new, the same in the length of the pencils. The finished product can be tied with a decorative ribbon.

If you use brushes, the vase will acquire the following form:

Decor of brushes.

Using fabric

To create the next vase, we will use a simple set of materials and tools:

  • glass container (it is best glass, since it looks beautifully from under the cloth of the facility);
  • a small segment of the fabric (you can slightly harmoniously combined colors, monophonic canvas supplemented primed);
  • glue;
  • scissors;
  • for decor: twine, buttons, beads, ribbons, lace, etc.

Idea: Instead of buying a new fabric, it is better to look for unnecessary pieces among your materials for needlework, and also to go through old, long-not worn things. The most cute and gently will look at natural materials: flax, cotton, natural lace.

Necessary materials.

Step-by-step manufacturing process:


The following photo shows another embodiment of this technique:

decor of burlap.

Knitted texture

For the next super simple master class, you will need an unnecessary knitted thing or yarn and needles (if you own knitting skills), as well as a vessel. The essence is to make a peculiar case for the container. To do this, from unnecessary knitted things you can cut off the sleeve if it is suitable for a vessel. One edge should be carefully turned and put on the container - voila, the decor is ready! If you know how to knit, then the original case can be made more than an evening. To avoid seams, it is better to knit on four knitting.

Knitted Case for Vase.

By the way, on the same principle of covers are made for supports under the stationery, candlesticks, cups and thermos and even furniture.

Variations of covers.

Mini-vase from light bulb

The next vase from incandescent bulb is characterized by small sizes, because suitable for placing a small bouquet or a single color. However, if you make an ensemble of several "VAZ", it will get a very spectacular picture.

Vase from light bulb.

For the manufacture to submit such materials and tools:

  • several blown or new light bulbs;
  • twine or thin braid;
  • pliers;

Step-by-step production:

  1. A sharp knife need to pose the attacked part (insulation).
  2. Next, you need to remove the entire "filling": Schtengel, electrodes, thread. It is important not to damage the base.
  3. Next, around the base you need to hide the twine and make a small loop - our vase can not stand, therefore it will have to swallow.

Manufacturing process.

This product is ready! It remains to do manipulation with the remaining light bulbs, and make a set.

Ready product.

The ensemble, located on the tree from the branches, will look very original:

Ensemble VAZ from light bulbs.

Ensemble

Such a composition looks very festive, elegant, gently and at the same time, for its creation will have to spend very little time. The main thing is to choose the container, identical in size and design. To fasten them undesirable - so if necessary, you can disassemble the ensemble. A much more practical and elegant option will be a beautiful satin or reps ribbon in several turns, tied to a bow. With a narrow tank neck in each way it turns out to insert only one flower.

Ensemble from tanks.

Decor of spacure

In complete, we will tell you how to reorganize the vessel with putty and paint. If you have a little putty left after repair, this option is just for you!

What will take:

  • glass vessel of any shape and size;
  • putty;
  • acrylic paints and varnish (paints should be contrasting shades);
  • floral grid;
  • sponge, fine-grained sandpaper and small spatula.

Puttic decor.


Step-by-step production:

Video: Vase from putty do it yourself.