Zoning space In the office, the process faced by all the leaders of large enterprises. The amount of work is constantly growing, the staff increases, certain canons and staff requirements appear. Therefore, it is important to provide each own working area. No one will interfere with the employee here, here it will focus at work and it is here that its performance will be maximum. Do this help partitions into the office.
Most. simple option is the division of employees in the cabinets. It's easy to do in old office buildings built during the time of the USSR and restructuring. In fact, in these cases, it is simply no options: the layout of the structure is such that there are no hills and large cabinets in it, everything is scattered along the small room. In new office buildings, the following ways of zoning space are used:
Stationary partitions that are installed in the office on an ongoing basis and allow you to create both separate areas for work and entire cabinets;
Glass partitions - a popular option in Western offices, which is similar to stationary, but is executed from glass and does not provide confidentiality to employees;
Sliding partitions - an option for passes that allows you to quickly create a wall in the place where people went a few more seconds ago;
Mobile individual partitions, providing jobs at once several employees at one long table.
Partitions are a modern analogue of thin walls that are used to create rooms in apartments. They consist of several modules and are quickly connected using fasteners. The dimensions of each insert may vary within 2-3 meters in height and so many in the width. A wide variety of structural solutions allows you to make the most suitable choice And not content with only what allows the financial side of the issue.
The purpose of partitions may be different: separation of the room into several sites, job creation, preparation of individual rooms or making unusual changes to the interior of the room.
For all this, special connections are used, the information about which is arrived in the table.
Purpose |
|
Linear connection | Increase the length of partitions without changing the configuration |
Facial stand | The end of the partition in places where it does not connect anything else with anything |
Intermodule stand | Stand, allowing to lengthen the span partition and strengthen it |
Connector two partitions at 90 ° | Used to connect two pads at right angles |
Tee under 90 ° | Relevant in the case of the manufacture of several partitions on the one hand, allows you to create them without disruption |
Connector 4 partitions at 90 ° | Used to prepare partitions from two sides |
Connector 2 partitions under 120 ° | An unusual version of the connector connecting 2 partitions under a stupid angle |
Connector 3 partitions under 120 ° | Used in premises with rounded design |
For any diversity, there is probably a good reason. It is it that causes competition and allows you to compete with different manufacturers. This reason is the obvious excellence of each type of partitions according to some parameters.
Mobile partitions are characterized by several obvious advantages. The most important of them is sufficient simplicity of installation. When installing mobile partitions, it does not damage the walls and the ceiling, the holes are not prepared and the latches are not attached. The wall of the walls is such that they do not at all require fastening to the ceiling and to the walls. It is enough to fix partitions on the furniture to provide them with stability. At the same time, the barrier can be dismantled at any time and set in another place.
This type of partitions is not so easy to install, but there are also its advantages. The dimensions of stationary partitions are several times more than mobile, so the mounting to furniture in this case will not be effective. Such partitions are already attached to the walls and the ceiling, which is why they cannot move them when the desire appears - damage will remain on the walls.
Another advantage of stationary systems is excellent strength and sound insulation. There are even bulletproof options that can ensure the safety of particularly important persons. The maximum height of partitions is 5 meters, so they are guaranteed to close the entire space in the office with low ceilings. A large variety of combinations of materials plays in hand in stationary partitions, because Their range significantly exceeds all other options.
In fact, the differences between glass and stationary partitions are not so much. Both those and others are attached to walls and ceiling, used for serious zoning of office and retail premises, have excellent strength and noise insulation. True, Glass has its own feature - transparency. Due to her in the office, the chiefs can always control their subordinates, and the company's team tries to be as close as possible to the management. In addition, they look where elegant plastic or combined analogues. When reluctance, leave their walls transparent, they can be sealed by paper, creating a large mirror in the office.
Production nuances in this category are the same as in conventional glass and plastic stationary partitions. They are needed to create a completed painting in the office: doors to cabinets, large free zones and space in arches can be flooded sliding doors. Due to this, the premises face the doors and becomes much more cozy. Sliding partitions are an element of a plastic or glass partition on special fasteners - wheels.
Interestingly, mobile partitions have a fairly rapid deadlines for the manufacture and setting of any partitions from the office. Installation time depends on the volume of partitions, but the manufacture of products is carried out in 5-10 days. Mobile partition installation takes only a few hours, so the delivery service is discussed in advance this moment with the client.
With stationary structures everything is a little more difficult:
First, the base of the partition is established, which will serve it to support in the future;
After fitting the base is attached, and on the finished size is made a glass or other material and blinds;
If the order dimensions are not large, it can be done on this day, otherwise the final assembly is performed only the next day.
It is impossible to say that partitions are really mounted faster than similar bricks. But in their favor, the otnaya appearance plays, which attracts customers so much.
The main material for the execution of the frame is the aluminum profile. It is painted in any color at the request of the client, and in the basic configuration, it is supplied in a gray color. Thickness varies within 2.8-7.5 cm, and this does not depend on the quality of the partition. It has already been discussed above that there are 4 categories of walls and each of them is done in a separate form of the profile ( different materials Remote different loads).
Office partitions of deaf type (most a budget option) Make from drywall, to which a layer of vinyl film is applied. If there is not enough sound insulation in the room, then you have to use mineral Wat. Transparent parts are made of glass M1, the thickness of which also varies and depends on the load on this partition and accuracy in its operation.
Every day, glass transparent (or translucent) partitions retain the market. They are installed in new office buildings, trading and administrative centers. All-glass office partitions provide a chic shine and a unique appearance only when proper design. To do this, the customer is obliged to provide the manufacturer with detailed information and several times with it speak all the nuances. Factors are taken into account:
Room parameters;
Placement of partitions regarding light sources;
Terms of use and number of people working and located daily in the building;
The desired view of the partitions themselves (transparent or deaf, with or without frame);
The wishes of the customer regarding sound insulation (if necessary, a second layer of glass is installed;
Methods for fasteners and the presence of moving elements.
A large assortment different species Partitions are partly preserved due to different costs. Not every customer is ready to invest a large amount into the organization of the workspace in its building. Minimum prices on different types Partitions are shown in the table.
As you can see, the difference is essential, therefore, the need of the market is preserved in stationary and mobile partitions.
Installation can be carried out on frame, and on a frameless basis, depending on the wishes of the customer. There are no obvious features in the installation methods. Excellent with glass and stationary partitions are combined by the same doors: sliding partitions or swing doors with a retainer can be used.
If we are talking about the installation of translucent designs, then much depends on the skills of the brigade of installers, the correctness of the completed measurements and clear following the installation rules. Glass partitions require special attention, because The material remains subject to chips, cracks and scratches. But the experienced brigade quickly oriented on the ground and fulfill the order. If necessary, even additional fasteners can be used to ensure maximum reliability.
Business space is always a lot of people, a fuss, a working atmosphere. The speed of solving labor tasks is influenced by each trifle, including such as the door. In the office, they only deliver inconvenience and occupy an excess space, slow down work and cause discomfort. Typically, they are used to replace partitions for an office that do not occupy an excess place, allow you to rationally distribute the space, use each square meter with maximum efficiency.
In most cases, standard sliding models are used in offices, although there are also folding options, score partitions. However, they are not very comfortable and not practical, they may not withstand high loads, so much more suitable for use at home.
The only exception is glass "accordions", which are put in stores and exhibition centers, allowing to divide the space, but for the office it is still better to choose exactly sliding office partitions. Preferably, it is preferable to order them according to an individual drawing, because in this case you can take into account all the features of the room, the purpose of the partition plant and specificationswhich she must possess.
The finished model should be combined with furniture, lining of walls, reps, interior and design room. Independent elements of office structures made in a single style create the effect of organicity and presentability, provide a proper impression not only at the company's employees, but also to customers.
Choosing a partition into an office, it is desirable to provide all the features of its further operation, focusing on the appropriate materials, designs and fittings. At high load, first of all, it is necessary to ensure the strength, setting the rollers on the floor and the ceiling, and using high-quality steel accessories, high-strength plastic. On the other hand, sometimes it is better to focus on the decorative part of the model.
When choosing a design, you can prefer both old and reliable schemes and develop unique technology. For example, it is very convenient when the panels are embedded in the wall, actually without the additional place. But on this issue it is better to consult with a specialist who will give the Council on the basis of the characteristics of the situation.
The modern pace of life imposes an imprint on all areas of human activity. Office as a place of production is not an exception. Large and small organizations are forced to be very mobile in all areas of their activities, which even pushes to the use of office partitions to organize a working space, many examples can be found in the photo.
Office partitions are a large variety. But how to competently apply these options on the "locality", this article will help to figure it out.
For the rational choice of this kind of furniture, you need to consider the features of the "geography" of the premises, the required number of jobs and their ergonomics. Much means general functional zoning Office space, the need for visual / audio isolation of workers and customers.
What is the priority of the designer component, is there any need to support the corporate identity of the organization? If you think about the need to use office partitions, it is worth starting with the above items.
And yet there are partitions and what are their differences:
The most popular type of separators. Allows you to arrange space and create the illusion of the cabinets. This is how different functional zones are created and differentiated.
Materials use a lot from glass to blinds. The most practical deaf panels.
The main feature is installation, it is a solid and such partitions are not transported, they are fixed in the floor and the ceiling.
The following in popularity is mobile office partitions. This configuration makes it easy to change the outlines of the workspace and convenient for small offices. The use of the design does not require mounting to the floor or ceiling.
Logos and branded signs are easily applied to such partitions, besides, separators do not interfere with the audio interaction between colleagues.
An even more mobile partitions are desktop designs. They are indispensable to create comfort to employees. With a competent selection of screens, you can visually and organizationally to protect the employee, as well as reduce the level of noise pollution of the working medium.
The main advantage of such a system of fence is the minimum cost of installation and light mobility.
There are also such varieties as special partitions and design solutions. They are quite individual and to a lesser extent mobile. Such partitions work as an interior decoration element.
Called to create an impression, and emphasize the image of the organization. Special partitions also have a narrow direction of use (specificity: refractory, anti-vandal and the like).
An important factor when choosing a configuration is the material of a modern office partition. In fact, you can find many non-standard options: partitions from valuable wood, partitions - aquariums, from sound insulating decorative panels. But most often, of course, plastic, glass, MDF are used.
Advantages of glass partitions - wide use, beautiful designer solutions. They do not interfere with the look and visually expand the space. This is one of the fashionable trends of modern time - the creation of a transparent working environment, when the boss and subordinates do not hide their rhythm of work.
The market offers both single and double glazing, when installing, pay great attention to reliability and gaps. Noise suppression in this version is insignificant.
More a practical decision For noise reduction will be a deaf partition from MDF, plastic, polycarbonate, chipboard. More often such partitions are perpendicular to the window openings, to ensure natural insolation. This is the most practical materials In terms of durability, cleaning and comfort of employees.
It is also worth noting the use of combined partitions. They combine all the advantages of the above materials.
The most practical is the height that closes the desktop, and above already translucent material. Or a deaf partition in a level with a doorway, and to the ceiling-glass, so in the room there is more light.
First of all, it is worth working with the design of the room and carry out functional zoning.
The next stage will be the determination of the stylistics of the room as a whole, it follows the use of material for partitions, their density and decorativeness.
Not a small component of choice is the budget allocated to the partitions. It is worth thinking if you want the partition to be transported or not. How light material is selected for long-term operation. Specify the installation of warranty periods and situations.
Partitions are a very important element of any office space. The separation between employees must be primarily functional and practical.
For comfortable work of employees to the choice of office partition, it is necessary to relate carefully, better consult with professionals.
Modern office buildings suggest one large space on which it is necessary to accommodate a whole staff staff. It is difficult to make it enough, and on the efficiency of labor, it will affect adversely. The problem can be eliminated using partitions. In this article, we will tell about their species and how to install.
This type of material will allow well to distinguish between the area in the room leaving the feeling of free space. With the help of glass, you can highlight a meeting room, designate the corridor or the place of recreation of employees.
Modern technologies allow the use of glasses capable of changing tinting force based on the effects of electricity on liquid crystals. They are also easy to install, and the main thing will not need to make changes to the room plan.
By type of construction, such partitions are divided into:
They are also divided into their intended purpose:
Stationary - securely attached to the floor and ceiling, provide good sound insulation.
Mobile - Easily mounted and moved in space. Convenient, because In case of redeveloping office, all the work will be held in a short time.
Transformable - Apply to rapid zoning space and are divided into:
Among such a variety, you can choose the most suitable option.
Such partitions will delete the space without losing its volumes. Mobile models can be made of different materials (tree, metal, glass, plastic). They are easy to install and care. To give a more elegant look, you can use stained glass, drapery from the fabric. They consist either from one or several profiles. The advantages of this species is:
For example, to distinguish between the workspace of each employee using such partitions. It is enough to put a screen between desktops. The tabletop in the form of a wave gives the integrity of the working area, at the same time burning employees from each other. This allows them not to be distracted and work more productively.
If there is no separate meeting room in the office, it can be easily solved. To do this, around the table you can put partitions from an aluminum frame and plastic inserts with perforation. This will create an atmosphere of privacy and negotiations will be more calm and fruitful.
Zoning space in the office should be comfortable both to his employees and visitors. If the room has a rectangular shape you can do the following. The central part is given to the reception and waiting room with comfortable sofas. Workplaces are located around the perimeter and fell apart with glass partitions in metallic frame. Creates a semblance of accounts in which one or several specialists can be located. Premises for negotiations are also provided. Glass has excellent noum insulation, which will be convenient. Despite the transparency of the material, the person will feel comfortable and confident, and the main thing is not distracted by what is happening in the office.
Best of all in offices apply partitions from combined materials. It can be a combination of metal and textured glass that is not so transparent.
Either the use of wooden panels that create a solid wall effect.
This is a type of mobile partitions that are used as in the interior. residential housesand in office premises. It is popular due to the ease of construction and installation. They allow in a matter of minutes to organize individual zones. Shirma can become a bright spot. For example, using a green model with narrow transparent glass inserts from above. They are conveniently separated workplace Secretary from other managers. This favorably affects the working atmosphere as a whole.
You can use a partition that is folded by the harmonica. It consists of several sections that are covered with cloth different color (green, orange, brown). The materials used muffled the sound and the person is not distracted by the conversations of their colleagues. In addition, on Shirma, you can fix important entries or projects of projects. This will allow you to conveniently organize the workspace and immediately cover the whole picture. This option is suitable for creative workshops or designer bureaus.
This type of partition is reliable, but it is necessary to remember that, if you wish, make changes to the location of the office zones it will not work. Therefore, when installing such products, it is good to think about the layout. Most often you can see options from the aluminum profile and glass. In order not to feel on the universal ferris, it is best to use matte glass or alternation of wide matte strips and narrow transparent. In such a room, a person will feel more comfortable and confident.
In addition, this design may emphasize the overall style of the company. For example, the use of transparent glass of dark gray and wood-colored Wenge color panels. The perimeter of the negotiation is trimmed with glass panels, a column and an angle opposite to it are covered with wood panels. In addition, a wooden decor is also mounted on the top of the septum. In combination with light walls and furniture looks this option zoning stylish and concise.
Desktop screens are an efficient and budget way to organize a workplace. This method will make it easy to redevelop, without a major repairs. They are made of various materials and are attached directly to the table with the help of accessories.
The scope of application is extensive:
The advantages of this species are affordable price and mobility. In a couple of hours you can completely transform jobs.
You can also note the following:
For example, one table intended for three people can be distinguished by a bright orange desktop. Thus, employees will not interfere with each other, and a positive color will raise the mood.
When organizing the training class, each workplace can be burned with a desktop shirma. This disciplines the trainees and will allow them to focus on solving the educational task, without being distracted by the neighbors.
When ordering partitions in specialized firm On the installation should not worry. Her staff will be delivered and installed. But you can do everything and do it yourself. To do this, you need to purchase everything you need, a lot of sets are presented in the construction market.
They include:
Before installing, you need to measure the workplace and apply the appropriate labels. After that neatly using building level, we are secure guides. The next step is the installation of canvases and installation required accessories. In this way, partitions in the office space can be mounted. Alone is impossible to do it, so some more assistants are needed.
This article describes the office partitions and their views. Suitable detailed description Each of them with lifting illustrations. Taking advantage of the information of the article, you can decide on the type of partitions that are necessary in a particular case, in addition to install this design on its own. Successful work.
Now there is little office can do without partitions. Often, such premises exist in old factory workshops, warehouses, new buildings - those places where there are no walls to delimit the workspace of many employees. And it is at this moment that it becomes necessary to quickly and efficiently divide the room to formed personal offices, conference rooms, separate jobs for employees.
Unfortunately, and maybe fortunately, it is not always possible to engage in a full redevelopment of the room and build the most common walls, but the office partitions will be allowed to obtain the desired result as a short time.
The main advantages of office partitions are the speed and ease of installation, the possibility of a slight dismantling and use in a new place, the possibility of transformation and a minimum of space that must be highlighted under the partition itself. In addition, such structures are practically not taken away useful Square, do not grind space, and some species are even capable of visually expanding it.
Modern selection provides the opportunity to choose optimal option To each work room. To decide which type of office partitions is suitable in each particular case, and will most apply to your requirements, we suggest familiarizing yourself with the diversity of office partitions.
Design of office partitions
Modern office interior partitions So diverse that without preliminary preparation it will be very difficult to choose the desired option. Therefore, let's try to deal with the entire choice. So, according to the type of construction, partitions are divided into stationary, mobile, sliding, desktop and folding.
Stationary office partitions
Partitions of this type are more reminiscent of ordinary walls. They are cast right in the office, attached to the floor, ceiling and carrier walls. Their design allows you to organize full-fledged doors and window Operas, creating separate rooms, working areas, meetings for meetings, etc. To their main advantages should include a high level of sound insulation, strength and durability. In addition, they provide ample opportunities for decorating the walls obtained, which cannot be provided, for example, mobile partitions.
Mobile office partitions
Mobile partitions are often called portable, or modular office partitions, since here the whole design is assembled from individual parts - modules that can be collected in an arbitrary convenient order, then disassemble and reconstruct again with new requirements. Mobile partitions do not need to be attached to the floor and walls, there are no dust and dirty processes during installation, it is easy to move, and when moving just take with you and install on a new place. Such partitions often serve only the psychological boundary to distinguish between space, but they protect weakly from noise. It is worth noting that sometimes they are still attached to the walls for greater reliability, but it is not necessary. Mobile partitions today in the market presented a huge amount.
In height, they do not exceed 2 meters, they can have built-in shelves, countertops and even doors. Thus, mobile partitions are most comfortable and can be disassembled and collected in another configuration and in another room. Ideal for small offices, since it does not interfere with the passage of sunlight, as well as the premises in which the permutations are often satisfied.
Folding office partitions
Folding or sliding partitions - excellent optionwhich imagined the advantages of mobile and stationary partitions. For them, as for stationary, it will take installation, as such structures are installed on the lower and upper guides. But then, if desired, it can easily be transformed, in a matter of seconds, connecting or separated by each other, for example, a conference room and a head office. The partition itself is made of several canvases interconnected by the type of harmonica. Also possible is an option to open a piece of coupe when the flat web moves along the guides, or the book, when two panels are folded when opening, and the lower guide is not required at all.
Desktop Office Partitions
There are still office partitions screens, or desktop partitions, which are great for separating the space of several employees, whose working tables are on topics to each other. Such partitions are attached to the tables, and if necessary, can be easily dismantled and transferred to another workplace.
The height of the desktop partitions, as a rule, does not exceed 50 cm, but the materials for execution can be the most varied - from glass to wood. Recently, magnetic partitions are also popular, which, firstly, dispel electromagnetic radiation, which comes from computers, and secondly, they can be used as magnetic boards to secure on their own elements.
All listed partitions may find use in the same office space, performing a little different roles, and complement each other.
Office partition and glazing material
From what material the partition is made, the comfort of the office itself depends largely, and what impressions will be indoors from customers, so you need to find golden middle between price, appearance and comfort. Most often there are partitions made of drywall from aluminum profile and plastic partitions. All of them can be deaf, have looting for glazing or completely performed from glass.
Office partitions from plasterboard
Plasterboard is the most popular material that is used to erect office partitions. It also applies to the most affordable materials, thanks to it, you can quickly allocate functional zones in the office, and besides, drywall is an excellent alternative to more capital designs. And due to the fact that such partitions are erected quickly, it will be unnecessary to change the usual mode of operation in the office. In addition, the resulting design can be decorated with any convenient and available methods: You can paint it, break the wallpaper, separate the plaster - everything, as with ordinary walls.
Aluminum office partitions
Especially and very popular partitions are used with an aluminum profile. First, they have a much more pleasant appearance than plasterboard, and many European companies have already passed on such materials. So if the appearance has priority importance, then you need to pay attention to such options.
Secondly, aluminum partitions are durable, allow you to withstand huge loads, but together they can be easily mounted, and if desired, you can dismantle and transfer to a new place. You can fill such a frame as you like with the material - wood, glass, plastic, etc., the benefits of such partitions can also add environmental friendliness and high sound insulation.
Plastic office partitions
This is another modern and popular material that bribes the variety of appearance. So, plastic can be of any color, can be matte or transparent, can vary in terms of sizes. In addition, plastic partitions differ high levels Soundproofing, so thanks to it you can make a huge office as functional as possible.
Plastic partitions are reliable and relatively durable: the average service life is about 10 years, so that they will withstand any movement and moving office. Such material is light, but, it means that it will not create an excessive load on the bearing structures. Yes, and in the care of these partitions, the most simple as possible, which is important for the conditions of the modern office - it will be enough to be easy to wipe them with a damp cloth with a detergent.
Although plastic partitions cost more precipitant, but on the solidity of the appearance, they significantly lose partitions with an aluminum frame. If the company's dear image enters your plans, it is worth thinking well before choosing plastic partitions. And choosing, try to find those people who are capable of qualitatively to mount such a design, otherwise it may be trouble with its deformation, which will be difficult to correct.
Frameless office partitions
Frameless, or all-glass office partitions - a modern highly aesthetic and functional solution. It is used, as a rule, tempered glass with an additional coating in the form of an anti-vandal film. As a result, we get a stylish, fully transparent partition, which, however, is distinguished by high sound insulation capabilities, it does not take away the useful space and natural light.
They can be any configuration and complexity, incarnate the smallest fantasy. In addition, thanks to, for example, the blinds fully open for the eyes can turn into a more cozy space in a few seconds.
By the way, all-glass stationary partitions may often be such invisible that employees or customers may try to pass through them. To avoid accidents, it is better to decorate the coating with some patterns, for example, a company logo.
Deaf and Combined Partitions
Fully transparent structures, of course, have their advantages, but their arrangement will require significant investments, and the purchase of blinds or tinting films is additional embezzlement. From the point of view of functionality and appearance, the optimal is the partial glazing of partitions.
Combined office partitions - the optimal option for saving the desired privacy of the workplace and its openness. The opaque part reaches the height, as she was vaccinated, 1 meter, so the furniture can be placed in an arbitrary order, without fearing to damage the partition.
By type of glazing partitions can be single and double. Externally, the differences will be invisible. Well, with a purely functional point of view, double glazing wins, so if reliable sound insulation is important for you, you stop at such a solution, even though it will cost and a little more expensive.
If the partition is completely devoid of glazing, then it belongs to the type of deaf. They are well suited to create completely isolated premises that are needed for the negotiation room, the cabinet of the head, etc. If such partitions are used to distinguish between the space between workers' work places, then note that they must be installed strictly perpendicular to the windows in order not to deprive them The desired stream of sunlight. Deaf partitions can be made of drywall, chipboard, PVC, etc.
Fire Office Partitions
Separately, it is worth highlighting fireborne partitions: if the safety of the room and employees is in the first place, it is better to take care that all the details of the office are, since the partitions, the most resistant to the action of fire. So, fire resistance is determined by how many minutes the material is able to resist high temperatures With fire. The highest indicators in this sense show all-glass partitions, as well as partitions made using an aluminum or steel frame and filled with glass.
So glass partitions are not only beautiful, but also practical in terms of security. By the way, on sound insulation, a dual glass partition almost does not lose drywall, which is able to delay the sound of 40 dB, and the double glass is 39 dB.
Decorative elements and fittings
When the type of office partition is selected, and it is decided where it will be located, do not forget to pay due attention to her appearance and various trifles. It is important to choose the right color so that the office interior causes the confidence of customers and the desire to work for employees. If there are doors in the partition, then you need to take care of suitable handles and locks to ensure not only convenience, but also the safety of all things and documents.
In addition, partitions with solid or partial glazing can be supplied additional protection From prying eyes - blinds or toning film. It is better to decide in advance which option suits you.
Do not forget about what durable material It would be chosen, the installation of an office partition is still of great importance, on which it depends, whether it will be durable, reliable and protect against noise.
