W. soft furnitureIn particular, the sofas have a little drawback, over time, their upholstery wear out and comes in disrepair. Some are immediately thinking about purchasing a new product, but it is optional. If the upholstery came into disrepair, but at the same time the frame remained as a new one, then the trim can be replaced independently. Of course, hauling the sofa with your own hands is quite troublesome business, but performed. But it is worth finding out the features of this process.
Usually the framework that make up the elements is stronger than the upholstery of the furniture. Therefore, over time, there is a need for its drawing. So, when is it necessary to perform this process?
Usually restoration is performed for reasons:
The execution of this process will be much larger than the purchase of new furniture. Therefore, you can view the photo or video of this process and boldly proceed to its execution.
Before dragging the furniture, you must select a cloth for the skin. The base of the fabric for furniture should be durable, wear-resistant. In this case, the form, structure, the design of the owner can choose at its discretion. If you want the furniture to become richer, more beautiful, gave the room with a luxury room, chic, then a hauling of upholstered furniture leather. In other cases, you can do the usual cloth in the form of a floc, chinilla, jacquard.
For having a soft type furniture at home, tissues of different types are used:
Velours 
Tapestry 
Jacquard 
Leather 
Flock 
Shenille The repair and drying of the sofa must first begin with the preparation of the necessary inventory. Further quality, the wear time of the sofa will depend on the proper repair process and comply with all rules.
What instruments will be required:
All tools are purchased, the material was purchased, you can proceed to work itself. But many professionals are still advised, before you decide a sofa with your own hands worth a photo or video with detailed process These works. After attentive familiarization, the performance of the repair and drying of sofas will be simple. It is desirable to fulfill the whole process in stages, you should not try to do everything right away.
First of all, it is necessary to disassemble removable design details. For this process, it will be necessary to use the tool, it is desirable to be careful not to damage the furniture. In order for the assembly process does not cause difficulties, it is better to make the photo on which the sequence and location of all design elements will be seen.
All fastening elements should be collected in some box and remove for a while to another place to do not lose it inadically.
The subsequent stage will consist of removing the old coating. The whole process must be done step by step:
Old upholstery must be carefully removed 
If necessary, replace the filler 
If necessary, you can replace the springs by fixing them with brackets. How much will the process of the pattern of a new coating, especially if the hauling is performed angular sofa? If you decide to do it yourself without sample, then of course it will take a lot of time. It is better to use old upholstery elements. If these items are not, then the material can be attached to the sofa and make the necessary marks, but do not forget to make the stamps.
For fun, the material should be purchased as much as possible, it is better to let it remain. Much more complicated because there will be a cloth of the same kind. Especially the residue can be used for other purposes.
Pattern details How to drag furniture:
Fabric need to fasten with brackets. The distance between the brackets should be no more than 4 cm.
During the tunnel, the cloth should be laid evenly so that the whole drawing is clearly visible. After the sheat, there should be no irregularities, deformations, folds.
It is necessary to cover the tissue back and seat 
We are tightening the sidewalls The assembly process must be made in the reverse order, as well as the product analysis was performed. But that the process does not cause difficulties can be consistent with the pictures that were made during the sofa parsing. Typically, the assembly process is performed quickly, does not cause special difficulties.
The instruction of the sheat is not so complicated, everything can be performed by itself. If the coup was in disrepair, it is not necessary to go to the furniture store for buying a new one. You can watch a video, study the peculiarities of self-trimming and everything can be performed own forces. The main thing is to have a desire, small skills and patience.
All finished parts fasten 
Over the past ten years, it has become popular to restore the old upholstered furniture - Soviet book-books, dining room chairs, favorite chairs. Reasons forcing people to give new life Old things, practically sentimental - a sofa-relic, brought by the great-grandfather in the form of a trophy from the war, or a chair in which her grandmother tied a socks to the family in three generations.
But more often, we are surprised to understand that the Quality Soviet Furniture on the quality and integrity of the frame is much better than a new one in low and medium price ranges. Such furniture is often done from a raw bar, cheap spring blocks, and is dragging from above with a cheap and poor-quality cloth.
There have been a great many restorers masters - there are even such craftsmen who may be so transformed the appearance of the old sofa that it will not differ from modern fellow collection and filling. But, in fact, with minimal shopping skills, desire and patience, hauling up a soft furniture with your own hands - an easy and even creative occupation.
You can update the appearance of upholstered furniture in two ways: washing and replaced. Both variants of rather labor crews and technically cumbersome, but do! All efforts will pay off when you see a sense of complete satisfaction and feel the fruits of your work.
Best of all this option is suitable for small pieces of furniture: seats of chairs, stools and small seats. In the event that the upholstery fabric on the beloved old sofa you like and well preserved, has a unique woven pattern, and you understand that the modern analog is not available for the price, then sofa case You can run in washing.
For washing large furniture covers, it is better to use the services of a professional laundry Minus one, but significant - the probability is great that the cover when washing "sit down" or will spread out. Since the upholstery fabric is not designed for washing, it is not processed on shrinkage, such as, for example, relaxed fabrics.
This path is the longest and complex, but sure. Old and dilapidation is ruthlessly emitted, and the sofa can please you with a new fabric of fresh colors. Complete replacement of the furniture cover is quite possible at home. But be prepared for the appearance of problems hidden under the problem: cracked frame beams, broken springs, lacrimated fiberboard or defective locking mechanism.
If, revealing the case, you detected the inner breakdowns with a chagrin, do not despair - just an operation on the replacement of the cover develops into a more complex, capital phase of the upholstered furniture.
This relatively new concept includes not only the replacement of the upholstery, as well as: the full repair of the frame, the replacement of the foam rubber, locks, spring blocks, all that will be required. In fact, the hauling is a major overhaul of upholstered furniture, following which you will get a new interior element made in your taste.
Overhaul Allows you to save even the most "killed" furniture In order for working on a drawing of upholstered furniture to flow comfortably, measuredly and without unnecessary nerves, you need to prepare the necessary tools in advance.
Almost all frame furnaces are attached to bolts, so without a set of keys can not do 
When holding new covers, the portnis scissors will be simply indispensable This is the first and dirtiest stage - you have to unscrew and remove the charts, locks and disassemble the framework. Then remove all old brackets that the upholstery is fastened to the frame.
After removing the upholstery, a pretty unsightly picture can open Take care of the place of disassembly - you will have to stitch the "dust of the centuries", the sofa or chair. And the staples have a submitting habit of flying through the floor and dug in the soles of sneakers (or legs). If there is no possibility to disassemble the sofa on the street, cover the equipment (televisions, computers, etc.) with a film, and everything you can carry out to another room.
Keep your garbage bags at hand - you will have to throw a lot of trash in which the inner sofa filling has turned (chairs, chairs, etc.). Having finished the disassembly, immediately remove the whole garbage from the house. In the inner dust of upholstered furniture can be triggered by various messy - from allergens to the dust tick.
Having removed the old case, you can detect under the harmless hounds of the upholstery row serious breakdowns, do not hurry to lower your hands and throw away the sofa, counting in your mind, how much will buy a new purchase.
All repair issues are solved, and the details of the replacements are a list of breakdowns and methods for their correction not so extensive and terrible as you may seem at first glance.
All old sofas and armchairs are based on frames bonded by castle and glue. This is a durable and durable system, much better than modern installation by self-draws. But when the service life ends, the corners of the frames give slack and crack. Beams need to be changed. Choose a dry tree, without knots, cracks and bark - Lob or middle with a flat straightforward structure. Otherwise, beam, carrying a large load, and does not have strength and integrity, quickly burst. The raw tree in warm and dry apartment conditions will begin to push and breast. Castle washed better repeat - Order Master-joiner or do it yourself. The joints of the frame beam in front of the connection is better to impregnate the plow glue.
Everything is easier - you measure the size and drink new details on your own logging or placing in the furniture workshop. It is better to prepare separate details of the jumpers (in the old sofas they are usually three - the middle and two side), which in the case of a break is easier to change. Mounting them to the frame can be carnations or a pneumatic stapler.
The burst springs not only worsen the ammontization properties of furniture, but may be caused by injuries and cuts Sick place is the middle of the seat where children jump and sit guests. Some craftsmen manage to "twist" the spring blocks, changing the burst springs to new ones. However, there is no guarantee that after some time there will be no more than any old spring and for it. It is not necessary to start all the work again. Therefore, rational replace the spring blocks completely.
As a belt can perform any dense ribbon of a suitable width. Usually the frames of the seats and the backs of old chairs are pulled by intertwined wide belts, on which the fear of the porolon. And the belts are very rarely torn, most often the place of the belt and frame connection is wiped. Any belts that you consider solid are suitable for replacement. The main thing is that they are dense weaving, it is desirable from synthetic materials and a width of at least 5 - 7 cm.
Any variety of foam rubber has such technical characteristicsas the number of compression. This is an indicator, how many times the material will withstand compressive and be able to restore its original shape and elasticity. Almost always, in the old furniture, Foolon has long outdressed itself in this parameter and turned into a dust or a viscous substance resembling sticky plasticine. Throw it without regret and iron a new foam rubber.
It is better not to save on the foam rubber - it is not only a soft layer, but also the protection of the inner design from breakdowns Also, a frequent problem - with the time of the steel lock, the lock mechanism is smaller, the backlash appears or flies springs, snatching the lock to the "sitting" or "lying" position. Inspect the lock carefully, it may be necessary to change the screw or adjust the new snack spring. If not, then the castle will have to change - good, it is not a problem, in stores of furniture accessories you will be offered big choice modern castles.
The most creative stage of work. You can leave the form of furniture formerly, in this case, you can use old covers as an outfit. Before working, they should be thoroughly shaken and allowed.
When holding out the new details, closely follow the location of the feeds of the duck and the base, as well as the direction of the pile. This is especially true of the cuttings and seat seats, if the width of the tissue does not allow a single cover (meaning the upholstery of a book of a book).
Possessing creative and sewing skills, you can transform the type of old furniture, make it more modern, convenient and appropriate to your taste. The main part of the modifications is achieved by the linings of the foam rubber - soft rollers are added on the air, the backrest linings. You can take into account the location of the body in the sitting position and add foam pads on the seat (kneeling) and insertion under the lower back.
When using extortes, folds, curly parts, covers will be completely new form And become more modern.
To qualitatively and beautifully perform work on modifying the appearance of upholstered furniture, the basic skills of cut and sewing are needed. If you are not sure about your abilities, it is better not to risk doing it yourself, but attract a specialist to work.
With starting tissue, be sure to leave 1-1.5 centimeters on the seams As often as possible in the process of sewing, make fittings - a foam, mitigating a rigid spring frame, a malleable material, the form of which is set by the case.
Repair works are produced, covers are sewn, it's time to start a responsible stage for the tension of the new upholstery. It is necessary to clearly realize that the end result and the appearance of your chair or sofa depends on the quality of this stage. You will need patience and accuracy in work.
At the stage of the last fitting, it will still be possible to fix errors - to sew or release the corners, alter the wrappers. Do not be scared if the case is very tightly put on the frame - in the process of its attachment you still "shink" it is even more denser. Worse, if the case is put on free, because Attaching it with brackets, it is probably possible to get ugly folds and chances.
Sequence of work on the fastening of new upholstery covers:
Stapler - best tool For fastening furniture covers 
Bymer - (from the Ukrainian) back of bed, chair, armrest of sofa, armchairs, etc. The last stage of work is an assembly. When assembling the sofa, the first thing is dripped the castle on the back and the seat, then attach the resulting design to the pallet of the book sofa and attach the former. When assembling the chair, you step by step mounted the seat and the back to one fair, then the second is joined to the design. The legs are mounted last.
Restoration helps to turn old furniture In a new, stylish subject of interior Since the process of furniture is quite complicated, we bring to your attention a small video, which will clearly demonstrate all the stages of the game, on the example of the restoration of the old chair.
Hauling upholstered furniture with your own hands - the case is responsible, time consuming, but with excellent practical benefits and moral impact. You get satisfaction from the work done and the updated view of the personally renovated object of the situation. And the main thing is the experience that, as to know, can put the beginning of a new passion, and perhaps - and income business. Good luck to you!
As if we did not try to maintain comfort in the apartment at the proper level, sometimes it's just worth looking back and confess to yourself that you need to change something or fix in design. Over time, each piece of furniture comes into disrepair. Sofas are no exception.
The place where we spend quite a large amount of time in a family circle, or simply accepting guests, or for reading any book, I would like to see in good condition. How often we use the sofa, so quickly he can take an unpleasant appearance.
Washed, aging, stain from spilled coffee, which does not completely withdraw, no matter how try, and the children in the heat of the games do not always understand what their actions can lead to. Here is just a small part of what can affect the outer bed of the sofa.
And now ask yourself the question: "Is it possible to do something with all this very, at home?" Answer: "Yes, you can".
In the article, consider the process of step-by-step drying of the coup of the sofa, without resorting to assistance. Of course, it is worth mentioning that the call to the home of specialists who will show the master class will be less long in time, but at the same time more costly. Choose to you.
First of all, it is worth specifying when you do to restore the piece of furniture on your own independently:
So, we decided to fulfill the restoration process of our sofa on their own. All of the above options are not about us. So, moving to the target target.
First of all, it is necessary to determine the material and equipment that we will be applied during the work.
The choice of the upholstery material should also be based not only on your personal preferences, but must take into account, for example, the design of the room as a whole. Moreover, on the trim, there is a large amount of information and before the choice should be pre-consulted.
In the photo in the catalogs of any sewing store, a wide range of materials can be hampered by a sofa and sew pillows. We are demanding skin, leathesum, velor, flock, tapestry and jacquard.
Here are some tips for the choice of fabric:
Sintepon will give airiness upholstered furniture. A pronounced smell of chemistry can serve as a call on poor-quality origin.
Sintepon is a durable material, and therefore it changes extremely small if everything is done technologically correctly. When applied it is worth paying attention to the thickness of the material and its strength. It is imperative that it is the same in the entire area of \u200b\u200bapplication.
With the use of foam rubber, everything is slightly easier. The quality of the material corresponds to its structure. Material of high quality, with compression, immediately restore the original shape, and with low time it will take. It is worth mentioning that in high-quality furniture between the body of a person and the foam rubber, gaskets from Wattin et al.
Tip: Pay attention to the smell of future upholstery, he should not push.
Tool preparation, also takes a separate place, here is a piece of necessary:
Of course, before we proceed to work, it is worth the subject of our furniture to disassemble (keys to help us).
Do not forget about some marks for yourself in this process, otherwise to disassemble - we will analyze, but problems can be collected - there may be problems. The process requires accuracy from our side, which means there should not be barbaric to tear down the attachments if it did not work with the "runway".
Such elements like sidewalls, the backs are subject to disassembly in the first place. Step-by-step process Disassembly:
It is not necessary to follow this instruction strictly, but just worth paying attention to it.
Here is the finish line. In order not to delay the process of the tug, on the hands, after disassembling the sofa, should be old upholstery.
it the best waywhich will reduce the restoration time. Especially for angular sofas or furniture with a complex design.
We take a new upholstery tissue and cut out the details from it using the contours of the old. You can pre-chalk or soap to designate this outline, applying both stencils an old upholstery and adding a centimeter 3-5 stock.
For most of the sofa such actions, it is enough, however, it is not so rosy with pillows. It is not necessary to do without a master at hand, but we don't have it, it means that we arrange your master class:
Note: Buying material, pay attention to the shade, may not match.
This method will allow us to cover the remaining parts of the sofa with their own hands. Do not forget that the material that is taken "in principle" may not be enough, be careful.
Buying upholstery material with a stock will save from unnecessary spending. The remaining material can be used on a drawing of something else, the benefit of fantasy is enough.
And finally. Do not jump above your own head, if you are not sure about your abilities, refer to the specialists. They will help to transform the sofa. You can also see a special video below to better imagine the whole drying process:
Kirill Sysoev
Cornish hands do not know boredom!
Content
Drawing a sofa, having suturing upholstered furniture at home, is possible even without attracting a specialist. This procedure is not so complicated as it looks like. On the Internet there are a lot of step-by-step master classes with photos and videos, where it is described in detail about how to cover up the soft furniture, which matter to use for this purpose. Looking at them, you can upgrade any furniture headset and make the interior of your home in unique.
Any soft headset over time loses its original look: the skin is torn, dirty, fades, defects appear on it. But this is not a reason to run to the store - much cheaper to update the chair, drag the sofa at home. To do this, it is necessary to decide on the choice of upholstery, stock all required tools. Digging sofas consists of 5 main stages:
To the selection of material for tuning the sofa, it is necessary to approach responsibly. Give preference to hard tissues: skin, jacquard, tapestry, flof. Due to its density, they are resistant to wear, which extends the life of the headset. Before buying upholstered material, decide on the purpose of furniture. If you only sit on the sofa, choose a tissue with synthetic fibers that last longer. Planning to use it as a sleeping place? Then stop your choice on natural materials.
Replacing the upholstery of the sofa leather is the most difficult, time-consuming and not cheap process. The skin for the sofa tangle must be high quality, unexpected, otherwise it will last long. Rear parts can be hampered by leatherette, similar to color and texture with skin - so restoration will cost cheaper. It is important to update not only the damaged part, but to drag the ottoo completely, otherwise old Material will contrast with the new one. When skin cutting, take into account that over time it can get sick, so leave 1 cm to the allowances.
In several stages there is a hauling of a sofa with a cloth and one of important moments is the choice of upholstery material. Such a piece of furniture is the favorite place of the whole family, so the upholstery should be practical, not a brand name. These criteria are answered by such types of fabrics: leather, its high-quality substitute, shenill, tapestry, jacquard, synthetic vinyl. Coloring is selected individually at will and in accordance with the overall style of the design of the room.
Getting Started with the choice of upholstery, pay attention to the natural types of materials, without a specific smell, which may indicate the presence of toxic dyes. Do not buy cotton fabrics, they are strongly impaired, quickly fade, wear out. If there is a drawing, it is better to give preference to a shallow print, which will make it easier for the ending of covers, will reduce the consumption of the material during the upholstery. When choosing a porous fabric, pay attention to the uniformity of the pile distribution is a sign of the quality of the material. 
To drag the sofa with your own hands, it will take a lot of time and patience, but it will cost cheaper than specialist services. Deciding with the material, it is necessary to disassemble the object of restoration with a screwdriver, a screwdriver and a nail. Disconnect the parts on the sides, overhead elements (back, seat), unscrew all screws, remove nails. The next step is to remove the old coating. It is necessary to do it very carefully without damaging it, every detail will serve as a lecturer for new patterns.
Replace, if necessary, spring, belts, foam rubber and other damaged parts, cut a new tissue over the old patterns. Further new Material Evenly stretch on the items of the restoration of the restoration and are fixed with the construction stapler. The final stage is a attentive and consistent assembly of an updated design with high-quality fasteners. Use the instructions if you are not sure that you can do everything correctly, without errors.
The process of folding any furniture consists of the same consecutive steps: disassembly, removal of an old coating, cutting new upholstery parts, upholstery with a new material of individual elements, assembling an updated product. The tongue of the angular sofa is with your own hands in the same sequence, only the design of it is a bit more complicated, two backs and two seats will have to update, work will require more time and effort. 
Interior modern kitchen It is difficult to imagine without a kitchen corner. Like any furniture, it over time comes to unfortunate, and in the kitchen the upholstery can not only break. It includes food products, stains are formed, the temperature difference is affected, so the hauling kitchen sofa - very important question. The process is no different from the update of another headset, but it is necessary to approach the choice of upholstered material more responsibly.
Coating a corner must clean and wash well, otherwise the restoration of the sofa will occur often. SAME suitable materials Are: artificial leather, tapestry and flock. Most kitchen corners are pulled by ecocuse, high-quality leatherette, which are well clean and serve not more than one year. The tapestry was created specifically for updating upholstered furniture, it is durable and perfectly cleaned. No less durable and wear-resistant is flock, it has a special moisture-repellent impregnation, which is very important for the kitchen room. 
If you decide to restoration of furniture for the first time, then dragging the sofa-book is most suitable for this. Its design is the simplest of all existing models, you need to disconnect only the side parts, back, seat. Next, trying not to damage, carefully remove the old upholstery and internal filling. Repair the damaged parts of the mechanism and replace the foam rubber, cut down on the stakes from the old coating, new patterns with a 1 cm. Tension them evenly to the items of the object of the restoration, secure the stapler, assemble the restored furniture. 
In addition to the main steps, the hauling of the spring sofa includes the repair or replacement of the spring frame. After making sure that it is replaced by the springs, attach the frame to the base of the stapler, and then still brackets made of rigid wire. The use of such an attachment will make the design stronger and more reliable. A layer of felt or polyurethane foam is stacked on top of the spring block, then foam rubber, synthesis and only then a new upholstery. Do the same with the back, collect furniture.
The cost of having a sofa at home will be lower than in a special workshop. True, not all the details can be updated with your own hands, for example, dragging the sofa armrests is difficult. Change the upholstery on flat, rectangular armrests will not be difficult, but such a detail of furniture can be curved shape for which the covers or stretch exactly the fabric is not easy. In this case, the work is better to entrust specialists.
Having learned how much the sofa is worth it, many are solved on its restoration on their own. If you do not know how to disassemble the furniture, do not know how to change the coating, you can seek help from private professionals who have a home the courtyard at home inexpensively. The same services provide companies. The cost of the sofa is dependent on its size, the prices for the selected upholstery material, the complexity of damage. In Moscow, the price of this service is:
|
Name companies |
Price in Rubble |
||
|
Comfort service | |||
Even the most expensive furniture over time loses the gloss, the main elements wear out, the details come into disrepair. But most of all due to frequent operation suffers from the upholstery: wipes, it might not be injured. It is not necessary to acquire a new furniture set - it is enough to hold the sofa with your own hands. Everything is simple here: you first need to choose a suitable fabric, disassemble the design and update it with the help of the acquired material.
Damage to upholstered furniture can have several "gravity" degrees. Depending on this, a variety of repair work. Here are examples:
The hauling is a set of events: from normal work up to 100% product update. When repairing, do not forget to check the other elements, the filler. Many experts recommend to purchase foam rubber or special furniture silicone. Due to this, the sofa will become much more convenient, because incorrectly installed springs will deliver the owner of the furniture a lot of trouble.
Before starting repair, it is necessary to familiarize yourself with the options for drawing materials, evaluate their characteristics. When choosing a tissue, it is unwanted to use synthetics, rough species. From the upholstery should not proceed an unpleasant sharp smell - this indicates the use of toxic dyes that can be dangerous to health.
It is advisable to choose a cloth with a small pattern or without it - it will reduce the costs for a drawing.
Tips for the selection of material:
Doubting sinteponne and foam rubber, you need to make a choice in favor of the latter, as it quickly takes the former forms. Experts recommend: Instead of one layer of material with a thickness of 50 mM, take two sheets of 20 mm, paving the layer of felt between them. If there are wheels, it is advisable to buy new or simply change the bearings.
Prepare all the necessary tools for work:
Important! To avoid damage to the elements, be patient and perform work as little as possible.
First, it is necessary to remove all the composite elements: pillows, pouf, sidewalls. In most cases, this stage will not cause any problems at the expense of furniture features. Disconnected fasteners are folded into a separate container so that they are not losing.
Next use the anti-stripler. Removal is performed as accurately as possible - this will not damage the old upholstery, because it will be required as a pattern to create a pattern of a new material. And to save the correct sizes, use the iron.
After cleaning from dust and garbage, the master is required to study all the details - they can be reused. With the exception of old foam rubber, which usually loses properties in a couple of years of operation. His replacement, as experts noted, will add the sofas of elasticity. Will disappear, lumps leading to discomfort.
Under the filler are located metal grid, springs and stretching. These elements need to be carefully examined and replaced the failed. If the springs are used instead of springs, they are also desirable to update. Tighten all fastening, strengthen the joints, the wooden parts once again proof with special glue for wood.
From how qualitatively the fabric will be prepared, the end result depends. Step-by-step guide:
You can do it easier: worn elements of the old sofa coating are applied to the fabric, we supply chalk and cut out .
When a blinking is the first time, the material calculation is incorrectly carried out - usually it becomes noticeable during the fastening of the tissue. In this case, it will need to purchase, but not always in the store there is a similar product on texture and color. Therefore, try to buy with a reserve. Remains can be used for the manufacture of pillows.
