Sometimes we need to cut something at the cottage, for example, a dry old tree trunk for the stove or for the mantle. This is just for such a case and goats for sawing firewood - you can make such hands. Goats will be foldable, which will allow them to be removed in the barn if they are not required at the moment.
Cuts for sawing firewood with their own hands - Connections
The main element of the design of Kozlov - Cross connection of two framesfolding in the form of X. Holding elements - transverse strips fixed by self-drawing on the frame. These planks impede the further decomposition of the design of the goats.
Goats for sawing firewood with their own hands - drawing of construction
The design of goats for sawing firewood consists of three x-shaped compounds and four transverse planks. All sizes are shown in the drawing above. The product is sustainable, capable of withstanding even a large log.
Cuts for sawing firewood with their own hands - bolt connection
Goats are recommended to connect to the bolts with washers to make it conveniently folded after use. If you do not fundamentally make a folding structure, then you can restrict ourselves to the furniture screw, or simply four screws.
Goats for sawing firewood with their own hands - drilling hole
On prepared bars drilled holes for fastening a screw, if you decided to make a foldable option. If you decide to make stationary goats, you can place the places of future screws.
Codes for sawing firewood with their own hands - Preparation of transverse planks
Also drill holes under the self-tapping screw on transverse boards that will keep up and not to give goats to touch.
Cuts for sawing firewood with their own hands - drawing with dimensions
The drawing above shows the sizes and locations of holes on the straps. Note that for each side the distance between the holes is different.
Waterproof goats do it yourself - assembly
The assembly of goats for the filling of firewood occurs as follows - clamps fix the timber and on the levels of fastening the transverse strips. Then screw the bolts and fix them with nuts on the washers.
That's how goats will look like a collected form. They can be hung on a nail in a barn on the wall and they will take quite a few space.
Well, even once I'll show the goats in your work. I think it is very convenient and practical! Take yourself a note, buy materials and make such goats for the saw of firewood with their own hands! All the best!
Other options
The idea of \u200b\u200btripods is a goat for sawing.
The simplest option goat is the basis of the bar.
Three-barrel and two-rod goats from the log.
Despite the fact that the goats for sawing firewood are a very simple design, they relate to machines. There are certain rules for creating them. RMNT will tell you what are the goats used for the workpiece of firewood, from which and how they can be made with their own hands.
You should not confuse the goats for the firewood of firewood with construction. They have completely different purposes and design. The goats for firewood should be such that it was convenient to put a log, sleeper, another big piece of wood. And in order during the sawing by chainsaw or hacking, our log did not fall anywhere, did not move, reliably held on the goats, and a working person remained a free minimum one hand. And better - both.
Buy goats for sawing firewood will not be difficult. There are standard, traditional metal structures in the form of a stand for logs. They cost from 2000 rubles, differ simplicity and with reliability, quite comfortable. In addition, folding goats are popular today, which is convenient to store in the barn. Usually they allow you to cut several wood layers at once due to the increased height of the upper part. There are such goats from 4 thousand rubles.
The most advanced option is the goats in the form of a stand on which the log for the log is installed. At the same time, the wood is tight, the teeth that are on the upper lifting part and below. This design will cost already from 5 thousand rubles. It is these goats initially are intended for sawing by chainsaw, which must be held and guided by both hands.
Deciding to save and just not waste time in search, many homemade craftsmen make the goats for sawing with their own hands. To this end, you can use:
From metal goats are obtained more reliable, but for their creation may require welding.
The height of the goats should be such a person to work comfortably, growth must be taken into account. Standard height - from 90 to 110 centimeters. Goats can be two-, three-, four-root. The longer the design, the more the horns should be to reliably fix the log. Typically, the length of the goats does not exceed 200 centimeters.
SAMI simple design - Two "x"-like compounds, in which the lower part above, and the crossbar between them, fastening at the joints. But such two-horned goats will be not too reliable and do not suit for sawing solid wood or large logs. therefore homemade structures Strengthening by installing additional horns and using the planks between the crossings "x", the main legs. The angle of the connection of horns is 45 degrees.
Experts believe that self-use of wood will become the most reliable fasteners in the case of the use of wood. They are better than ordinary nails. In the case of using a profile or pipes, respectively, the screws for metal should be used. Or cook goats for greater reliability. True, in this case, they cannot be disassembled or folded.
Of course, for the construction of goats, it is better to use electric tools, in particular, screwdriver, as well as a jigsaw for cutting pieces of metal or timber desired size. Wooden design It is possible to handle the veil, pre-passing. And metal - paint. However, usually about appearance Cats for sawing firewood Home masters do not care. Here the main thing is convenience and reliability.
Perhaps any owner of the house with a furnace, a fireplace or a bath at least once practiced firewood. In the campaign or fishing, sawing or pricking trees is easy, as it takes some firewood. It is much more difficult to harvest firewood regularly, about the reserve. To facilitate the process of cutting the long century, the goats for the firewood saw are used.
The design has a very simple device, so it will not be difficult to make it even a newcomer. To break the woods not only quickly, but also easy, you need to choose the right goats.
For a long century, the goats practical did not change. Masters only adjusted the width and height of the product under their own growth and size logs. Previously, wood saw a pair with a two-handed saw.
The process of cutting when working together was monitored by free hand. From both sides, the workers held the ends of the log, directing it or pressing for more convenient operation. When cutting large trunks, they were completed a little deeper than the middle and scrolled on the other side. With such a cut, the sleeve could have an uneven edge, which burned the ridge.
Traditional goats for firewood were made from cruciform racks. They were located at a distance equal to the dual firebox of the stove for which firewood was saw.
Such products still can be found in everyday life, but they still have undergone some changes. They added another crosslinor, which allows you to clamp firewood. On such goats you can work one-handed saws.
Also on modern market You can meet metal goats. They are equipped with cloths for a strong fixation of wood. Metal devices have screw stops, which also make it easier to cut, holding a log in goats.
On such goats, it is much easier to harvest the fuel. If you independently set firewood, then such an adaptation is indispensable in your farm.
If you want to stock large amount of fuel, it is best to operate with an electrical or gasoline saw. Such tools not only make it easier, but also accelerate work at times. In addition, they reduce physical and time costs.
Fill firewood with a chain saw on ordinary, traditional goats will not work, as the tool can break if the tire is stuck in the cut. If you cut off the slices of the logs, leaving the limit of crossing design, the incision will be long and irrational. That is why for the workpiece by electric tool, special goats for sawing firewood chainsaw have been developed. The simplest design for cutting firewood chain saw consists of a severe base and stable legs. The trunk of a tree is spilled in places of its exit beyond the border of the goat. Hold your log in such an installation with foot.
The speed of work on such a design is not very high, but it is quite suitable for cutting middle batches.
If you are engaged in a blank thin logs, then it is better to build a rack for logs. The design is 4 legs or pillars, welded or attached to the base. For it, you can use a welded frame or a heavy metal plate. The device is convenient only for working with small trunks, the cutting of large logs will not be done on it. The size of the goat is chosen based on the size of the furnace and the length of the supplied logs. The product can be made almost any size.
Note! To facilitate the operation of the frame goat, secure the rack is not welding, but a bolted connection. This will allow you to quickly disassemble the design for seizure of firewood.
The device has the only minus - the happie of the lane in it can not be completed to the end, otherwise the saws will be stored in the ground. To eliminate such a problem, it is possible to establish transverse supports in which the gap between the field and the goat stand is formed. However, the device of this type cannot be quickly disassembled, which reduces its functionality.
For the manufacture of a classic design for a filling of firewood, you will need one of the listed materials:
The product is very simple, but that it is functional, you need to comply with certain recommendations. One of which is to draw up a scheme or drawing that will facilitate the assembly. The drawing needs to mention the size and highness of the structure. This will allow us to properly collect goats and calculate the amount of the required material.
It is very important in the work to accurately choose the arrangement of the supports. Right slope It will make the design stable, and saws simple. If you do not know how to make goats with your own hands, use the instructions from professionals.
In the manufacture of a goat, it is necessary to correctly select their height and length. These dimensions affect:
Correctly selected parameters will allow you to collect goats quickly and right. The optimal tight of the design is 90-100 cm. With such a height, the employee will not strain the back with constant slopes, and the hands will be horizontally working surfaces.
Most often, it uses a conventional saw for wood harvesting, it allows you to cut a small chocks. Goats for such purposes may have standard dimensions. For the assembly of such a design, the following materials will be needed:
The material will be required for homeowners who have no building materials on the site. Those who have crashed bars or pipes from other works can use them in the god assembly.
To create a design, the next set of tools will be required:
When the material purchased can be started. The frame of the goat is made, starting with wood processing. To do this, with the help of a roulette and pencil make the marking of the places of cutting. They need to be made by 6 on each side. All grooves for connecting legs and crosses will be 12. When the bar is 100 mm, the groove depth is 25 mm, it is enough for durable fastening. When picking up the grooves, make sure that they are a couple of millimeters less legs. After marking and putting the grooves, all parts are collected in a single design.
After assembly, fasteners amplifiers are installed, they enhance the strength of the design and make work more secure. To do this, disappear near each leg so that there is enough space to install a new mount. After assembling the product, it is treated with a protective composition. To do this, use lacquer or sampling. When the design is driving - it can be operated.
The construction of metal is more often called the machine, due to its stability. In addition to stability, such goats are very durable. If you want to assemble such a product yourself, prepare the following materials in advance and tools:
Before assembly makes an exact scheme or a goat drawing. After determining the size of the design, the beams are placed for the base and cut them. They also stand in advance to place the points of welding or combining legs and "horns".
Note! If you are planning to take a goat goats in the future or transfer them from place to place, use a bolted connection. The design collected using such fasteners will be more mobile.
For the construction of an ordinary, stationary machine use welding. Parts of the design are welded with each other, starting with the legs. Better in such works to enlist the help of a partner. After welding on the longitudinal beam, a wooden plank is fixed, it will protect the metal from the saw.
For self-assembly You can get a device suitable for all parameters. Do not be afraid to add your edits into the design, it will make it possible to make work even more efficiently.
The simplest device for sawing firewood is a goat, allows you to process cubic meters of wood raw materials, make a neat cutting board or metal strip. The classic view of the machine is represented by a simple design. Material for the manufacture of wood equipment is more than available and selected at discretion: wooden bar, thin trunks of trees, metal profile, scrub metal.
Like any machine, the scattering unit requires preparation for its manufacturer, thinking about the design, performing an outline or drawing with an arrangement of sizes, an indication of small parts, an angle of inclination of the supports, the height of the horns. A careful approach will get rid of subsequent improvement, will speed up the assembly, contributes to the creation of prerequisites for efficient work.
Exactly selected sizes and dimensions of Kozlov allow you to collect a light, stable and convenient in the work of the box for sawing logs. The overall size should take into account the comfortable and convenient use of the machine:
The height of the log location affects the duration of sawing. The optimal windows of the raw laying of raw materials are 90 - 110 cm, the size allows you to work in a free natural position, without bending the back or arrangement of the hand above the horizontal.
The work tool predetermines the montage on the goats of additional elements. Work using the two-handed saw requires the presence of an end for hand. A simple emphasis is made of the woods inserted into the goat.
The use of chainsaws for the billet chocks requires a strong material of the top of the goat and another design. The technology of working with a modern cutting tool requires a maximum space for the free hanging of one of the terminals of the log to remove the possibility of clamping the web.
Give dimensions and detailed instructions For the manufacture of light, durable and comfortable goats.
For work prepare material from the list:
The proposed list is not mandatory. Materials are selected from the presence of residual residues from previous construction work.
To work requires a set of tools:
The base for the base is for 12 propyl, 6 pieces on each side, 2.5 cm depth. This will be the grooves for horns and legs. Helpful advice. The propelles are performed by 2-3 mm already than 50 mm, for dense, in the tension, inserting the bars 50x50 mm.
The chisels and hammer are chosen by the propellants, in the resulting grooves are inserted in the size of the bars. Self-assembly is fixed.
In an inch section, there are places for the fastening of amplifiers, providing the fortress of construction and removing the possibility of discrepancies of the legs during load. The end segments are spawned with knife, the length of the flush with legs is selected. At the angle, the ends of the legs resting in the ground are spawn.
Finished goats are processed by a verse. After drying, a simple machine is ready to use.
The execution of cutting logs with a two-hand saw causes the cutting of the machine due to the alternate shifting force and leads to the tipping of narrow goats. X-shaped racks for the sawing unit under the two-way saw are made of thick, good quality Woods with a cross section from 10 cm. Using a metal tightening for a screed or wooden barber. The width of the lower support is 10-15 cm larger than the distance from the surface to the top of the tier bar. In case of compounds of supporting cross wooden screedSupply additionally produce a slide timber, strengthening and giving structures stiffness and stability.
Dimensions for the manufacture of goats are taken similarly to sizes for a simple design, with adjustment of dimensions for the bottom support.
The workpiece is made seasonally. The used sawing machine in the rest of the period is dust, wind and occupies a useful space. The folding goat model will help solve the issue of rational storage, it will be useful when conducting away logging.
For the manufacture of the model, the material will be required:
The simplicity of design is combined with ease of manufacture. The bars of the same size are taken ready or bloom from a 50 mm board. On each bar is planned place for the hole with a diameter of 1-2 mm less than the diameter of the pipe and drills the pepper through. By pairing, bars perform the limiter. The length of the limiter is selected on the corner of the opening of the goat 350-450.
The correct assembly allows you to fold the bars in the same plane and remove the goats to the demand.
Metal goats have a longer working resource and compact dimensions, unlike classic, wooden structures. For the manufacture of gods from metal at home the following materials and tools will be required:
According to a predetermined sketch, with affixed and verified sizes, the base beam is cut off, the places of attachment of the legs and the horns are scheduled. The rest of the design are cut. The connection is selected. For collapsible design, the connection of parts is performed by bolts. For a stationary goat, welding parts are used. On a longitudinal corner or pipe, bonding racks, a piece of bar 50x50 mm is fixed. This is a precautionary measure and protection of the saws, eliminates the contact of the working surface of the teeth with a metal casing of goats.
The cost of the homemade metal model is high and comparable with the price of the gathering of the ready-made goat model on the construction market of tools and equipment.
The model range covers small specimens intended for private use, and ends with large, overall machines for large production. Price limits from $ 12 to $ 500. The choice of model is made according to the intended load on the bed, length and thickness of the working forest.
European manufacturers offer inexpensive goats for sawing firewood. Buy with delivery chosen model offer many Ukrainian firms distributors. For example, the German company MB exhibits models in the Ukrainian market from $ 11. The difference between high-quality goats for sawing from Germany from similar Chinese copies in the composition and strength of metal, machine equipment with additional elements. A gentle edge is envisaged to increase the clutch, reduce slip and turning the log when working, compact aesthetic design, stool processing and edges with anti-corrosion composition.
The popularity of the use of chainsaws for cutting firewood is associated with a low cost of the tool, ease of control and speed of performing a large amount of work. Compared to the traditional method of manual sawing, the productivity of chainsaws is ten times more, and ease of work is higher by several orders of magnitude.
Owner modern tool The original and comfortable design of the goats is offered. Cutting a chainsaw log on a classic X-shaped rack can lead to a chain clamp during cutting. To eliminate the wiring of the chain saw, the worker has to turn the log manually by cut down to completely execute cutting. More secure is the method of cutting freely protruding end of the Lesin.
For the sawmill with chainsaws use advanced metal goats. On one of the ends of the machine is set to the gear and the steel chain is welded. Madely put forward one end of the log, the second is securely clamping in the device.
For private sawmills or large farms on the workpiece and recycling of waste scaffolding, porching, bruises of boards, rails, brusons, industry produces universal, comfortable crossing goats. The machine makes it possible to put a dense stack of all the timber processing, fix it with a special adaptation, eliminating the possibility of sprawling or an unexpected cropping rickest during the cutting process. The cost of models starts from $ 80.
An unsightly design of the goat is converted by desire to a modern aesthetic appearance, with the expansion of the main functionality of the machine. The framework of the sawing machine is preserved for the same: legs with horns and connecting housing.
The versatility of the created goat lies in an extraordinary design and extended functionality of the horns. Curved at an angle of the leg after assembly form vertical crevices, with the convenience of a logging of any diameter, boards, bars. Cut the cloth of a complex, uncomfortable configuration will become easy and safe.
For workpiece or any other work with a tree, reliable goats will be useful. We find out what they happen and how to make them yourself.
Despite the fact that the goats for sawing firewood are a very simple design, they relate to machines. There are certain rules for creating them. We learn what are the goats used for the workpiece of firewood, from which and how they can be made with their own hands.
Cods for sawing firewood
You should not confuse the goats for the firewood of firewood with construction. They have completely different purposes and design. The goats for firewood should be such that it was convenient to put a log, sleeper, another big piece of wood.
And in order during the sawing by chainsaw or hacking, our log did not fall anywhere, did not move, reliably held on the goats, and a working person remained a free minimum one hand. And better - both.
Buy goats for sawing firewood will not be difficult. There are standard, traditional metal structures in the form of a stand for logs. They cost from 2000 rubles, differ simplicity and with reliability, quite comfortable. In addition, folding goats are popular today, which is convenient to store in the barn.
Usually they allow you to cut several wood layers at once due to the increased height of the upper part. There are such goats from 4 thousand rubles. The more advanced option is the option - goats in the form of a stand on which the log for the log is installed. At the same time, the wood is tight, the teeth that are on the upper lifting part and below.
This design will cost already from 5 thousand rubles. It is these goats initially are intended for sawing by chainsaw, which must be held and guided by both hands.
Deciding to save and just not waste time in search, many homemade craftsmen make the goats for sawing with their own hands. To this end, you can use:
From metal goats are obtained more reliable, but for their creation may require welding.
The height of the goats should be such a person to work comfortably, growth must be taken into account. Standard height - from 90 to 110 centimeters. Goats can be two-, three-, four-root. The longer the design, the more the horns should be to reliably fix the log. Typically, the length of the goats does not exceed 200 centimeters.
The simplest design is two "X"-like compounds, in which the lower part is higher, and the crossbar between them, fastening at the joints. But such two-horned goats will be not too reliable and do not suit for sawing solid wood or large logs. Therefore, homemade structures are reinforced by installing additional horns and using the planks between the crossings "x", the main legs. The angle of the connection of horns is 45 degrees.
Experts believe that self-use of wood will become the most reliable fasteners in the case of the use of wood. They are better than ordinary nails. In the case of using a profile or pipes, respectively, the screws for metal should be used. Or cook goats for greater reliability. True, in this case, they cannot be disassembled or folded.
Of course, for the construction of goats, it is better to use electric tools, in particular, screwdriver, as well as a jigsaw for cutting pieces of metal or a bar of the desired size. Wooden design can be treated with a versa, pre-stroke. And metal - paint. However, it is usually about the appearance of goats for the sawing of firewood homemade masters do not care. Here the main thing is convenience and reliability. Published
Subscribe to our Yandex Zen Canal!
If you have any questions on this topic, ask them to specialists and readers of our project.
