House, design, renovation, decor.  Courtyard and garden.  With your own hands

House, design, renovation, decor. Courtyard and garden. With your own hands

» Internal stripping for polypropylene pipes. Stripping for plastic pipes

Internal stripping for polypropylene pipes. Stripping for plastic pipes

The price is 10 900 rubles.

Boilers of this type are designed for heating and hot water supply of residential and office premises with heat losses up to 2900 W (area of ​​the room up to 300 m 2, depending on the model and the thermal insulation of the room). As a rule, such devices are used for heating houses of the private sector.

The boilers operate on natural gas main GOST 5542-87, pressure 635 - 1764 Pa.That is, the devices are designed for our Russian standards and are maximally adapted to the large differences in gas pressure of our long-suffering gas network. The range of maintaining the water temperature in the apparatus is 50 - 90 ° C.

Overall dimensions of the device are 1179/420/533 mm (height / width / depth), in horizontal section the device has a round shape. Automation manufactured by CJSC "MASHZAVOD" (does not require power supply, which is very important in N A Sh AND X operating conditions) ... Plate type heat exchanger(which provides high efficiency, not less than 85%) ... The device is designed for use in systems with natural circulation of the heat carrier(does not require circulation pump) , top wiring and atmospheric expansion tank... To improve the conditions for the circulation of water in heating system it is preferable to install the device in basements or semi-basements below the level of heating devices (radiators).

Boilers of this type have been produced by CJSC "MASHZAVOD" for over 30 years and have perfectly proven themselves in Ukraine and neighboring republics. the former USSR... These boilers became the prototype for the creation of gas boilers "ZhMZ" (Zhukovsky machine-building plant).

These boilers differ from Dani boilers in the following parameters:

Safety automatics "Eurosit" with built-in pressure stabilizer

Traction sensor with gold-plated contacts "Campini"

Low-flame burner made of stainless steel "Polidoro"

temperature sensor

Characteristic
AOGV-11.5
Rated power, kW 11,5
Heated room area, m 2 35-120
Water consumption in hot water supply mode with heating at 45 ° С, not less, l / min -
Gas consumption, no more, m 3 / hour 1,45
Efficiency at continuous operation, not less,% 85
Weight, kg 48
dimensions
- height, mm 1179
- width, mm 420
- length, mm 533
Diameter of the thread on the gas pipeline inlet of the apparatus G 1/2-B
Diameter of a thread of pipes of a heating system G 2-B
Diameter of a thread of pipes of a hot water supply system -