Super TP "is intended for use in heating systems of the" warm floor "type, when the height of the screed cannot exceed 3-5 cm. As a rule, these are already operated premises, where the height of the" warm floor "structure is a limiting factor in the choice of heat-insulating materials.
"Energoflex Super TP" is a foamed polyethylene of the "Energoflex Super" brand, covered with aluminum foil, on which a polymer film with markings is applied for laying heating elements. Thermal conductivity coefficient - 0.039 W / (m.K) at 20 ° С, thickness 3 or 5 mm. The share of radiant energy in the heat transfer of a warm floor exceeds 50%, therefore, for effective work of the system, the temperature of the emitting surface is important, i.e. floor.
The use of a layer of thermal insulation "Energoflex Super TP" can significantly reduce the outflow of heat into the capital structures of the building. As a result, in order to achieve the required temperature of the underfloor heating surface when using insulation, it is possible to reduce the installed power and save up to 20% in energy costs.
Aluminum foil provides uniform heating of the heated floor surface and avoids the appearance of areas of local overheating, which is especially important with a small thickness of the screed. Note that when using metallized rather than metal coatings, local overheating of individual areas is inevitable.
This not only reduces comfort, but can also lead to cracking of the screed. The ability to endure multiple heating and cooling cycles of the "Energoflex Super" polyethylene foam without destroying the pores and the presence of a protective polymer film that ensures the safety of aluminum foil from the aggressive effects of concrete cement mortar, allow us to speak about the stability of the thermal insulation properties of the material throughout the entire service life.
Due to the properties of foamed polyethylene "Energoflex Super TP" performs a useful secondary function - floor sound insulation. There are two main ways to install a warm floor. The first method (see fig., A ~ 1 ~) is when the warm floor occupies the entire area of the room:
The second method (see fig., B) is when the warm floor is laid on a part of the area of the room:
After the screed has hardened, the floor covering is laid.
ENERGOFLEX SUPER TP AL rolls are a high-quality solution for thermal insulation of heated floors in residential premises. Foamed ENERGOFLEX SUPER polyethylene is covered with aluminum foil, protected by a chemically resistant polymer film. Foamed polyethylene reduces heat loss, and the foil evenly distributes heat from the heating elements over the entire floor area, protecting the screed and floor covering from local overheating. The small thickness of ENERGOFLEX SUPER TP AL rolls allows to reduce the overall thickness of the underfloor heating system, saving space in living areas.
ENERGOFLEX SUPER TP AL ADVANTAGES:
- the material is recommended to be used in "warm floor" systems designed to create thermal comfort in living quarters, in addition to the main sources of heating.
- a ready-made thermal insulation system for a warm floor can significantly reduce installation time.
Payment is made through PJSC SBERBANK using Bank cards the following payment systems:
Payment is made according to the bank details that we will provide you. When paying, in the purpose of payment, the number of the Internet order is indicated.
Check the delivery cost with the managers of the online store.
The cost of delivery depends on the carrying capacity of the vehicle, the address and dimensions of the goods you purchased.
Free shipping within the city of Sochi and the Adler region for orders with an amount of more than 50,000 rubles, metal from 3 tons.
Pickup is made on the 5th day after 100% payment for the order at the addresses:
In order to avoid misunderstandings, we kindly ask you to carefully study the User Manual, the terms of the warranty, check the correctness of filling out the warranty card. The warranty card is valid only if there are correctly and clearly indicated: model, serial number of the product, date of sale, clear seals of the seller, signature of the buyer. The model and serial number of the product must correspond to those indicated in the warranty card.
Warranty LimitationsIn case of violation of these conditions, as well as in the case when the data specified in the warranty card is changed, erased or rewritten, the warranty card is invalidated.
In this case, we recommend that you contact the seller to obtain a new warranty card that meets the above conditions. If the date of sale cannot be established, in accordance with consumer protection legislation, the warranty period starts from the date of manufacture of the product.
Ready-to-use heat-insulating material "Energoflex Super TP" is intended for use in heating systems of the "warm floor" type, when the height of the screed does not exceed 3-5 cm. Usually these are already operated premises, where the height of the underfloor heating structure is a limiting factor in the choice of heat-insulating materials ... "Energoflex Super TP" is a foamed polyethylene of the "Energoflex Super" brand (thermal conductivity coefficient 0.039 W / (mxK) at 20 ° С), covered with aluminum foil, on which a polymer film with markings is applied for laying heating elements.
The share of radiant energy in the heat transfer of a warm floor exceeds 50%, as a result of which the temperature of the radiating surface, i.e. the floor surface, is important for the efficiency of the system. The use of a layer of thermal insulation "Energoflex Super TP" can significantly reduce the outflow of heat into the capital structures of the building. As a result, in order to achieve the required temperature of the underfloor heating surface when using insulation, it is possible to reduce the installed power and save up to 20% in energy costs. Aluminum foil ensures uniform heating of the underfloor heating surface and helps to avoid the appearance of areas of local overheating, which is especially important with a small thickness of the screed. It should be noted that when using not metal, but metallized coatings, it will not be possible to avoid local overheating zones, which reduces comfort and can lead to cracking of the screed. The ability to endure multiple heating-cooling cycles of polyethylene foam "Energoflex Super" and the presence of a protective polymer film, ensuring the safety of aluminum foil from the aggressive effects of concrete-cement mortar, allow us to speak about the stability of the thermal insulation properties of the material throughout the entire service life. Due to the properties of foamed polyethylene, "Energoflex Super TP" performs a useful secondary function - floor sound insulation. There are two main ways to install a warm floor.
The first way when the warm floor occupies the entire area of the room:
Second way when the warm floor is laid on a part of the area of the room:
