When selecting interior doors The dimensions of the opening with the box and the parameters of the canvas are taken into account. In order to accurately determine the appropriate indicators, it is necessary to make preliminary measurements of the filling area and take into account the standard values \u200b\u200bfor the installation of the Lutka. Depending on the type of design, some parameters may differ, and therefore should consider this question in more detail.
Interior doors dimensions comply with generally accepted standards
When considering the size of interroom doors, together with the box, several indicators are taken at once: width, height and thickness of elements, as well as their weight. First you need to consider the doorway itself. Since in the future it is supposed to filling, initial dimensions will be somewhat large. When conducting subsequent work to adjust the width and heights may be reported wooden beams, Brick or drywall, affecting the maximum allowable design weight.
Basic doorway parameters
An important component of the opening is a box, its sizes must roughly coincide with the parameters of the door canvase. It is important to comply with technological gaps around the perimeter. The thickness of the frame is selected under the thickness of the wall. If the widths of the planks are not enough, good products apply in the compensation for free space.
The central element is directly the doors themselves, most often swinging. What are the standard dimensions of the interior door? To answer this question, you need to consider the following parameters:
Extremely and stylishly look in the interior two-sided swing doors. The canvas in this case consists of two sash. Their width depends on the type of model and the size of the passage itself.
For two-dimensional interroom doors, dimensions can be accepted with an increase in the coefficient of 1.5-2, that is, double values \u200b\u200bare taken.
Standard dimensions Double interior doors with a box are 120-150 cm. Such dimensions allow you to install a full-fledged two-dimensional design, comfortable for use. For minimal sizes, double interroom door structures are assumed in the following version: in them one sash is fixed in place, being temporarily or completely fixed. Its width is half or third of the standard parameter. The second part of the door leaf is a full-fledged door. If the width allows, two equivalent sash is installed. This allows you to create not only the visual effect, but also increase the passability by expanding the passage as needed.
The standard height of such interroom doors remains within 200-210 cm. At high ceilings, it can be increased by adding a fixed insert to facilitate the use of sash, since their weight is also increased accordingly. Such bivalve structures can be seen at the entrance large rooms In rich houses or in public buildings.
Dimensions of standard two-sided doors (one-hour and double-rank)
Not always when selecting the dimensions of the door design, the hosts are observed. Today are becoming increasingly popular non-standard solutionsthat allow you to bring the design to a new level. These include, first of all, the options for making aisle in interior partitionserected from plasterboard sheets. Here you can not only increase the height and width of the opening, as for two-dimensional doors, but also to derive the unusual form of any complexity. At the same time, it is important to take into account the weight of the web, since the plasterboard partitions are not able to withstand excessive loads. In this case, it is necessary to limit the minimal dimensions of the swollen interior doors or pick up lighter material.
An excellent alternative will become sliding doors: Jewelery, accordions or books. You can use dual models.
Non-standard doors include various sliding systems
In general, among the size of interior doors that do not comply with the standard, only two characteristics can be distinguished:
When the dimensions of the interior door were defined, you need to correctly select other elements of filling the doorway. Since the basis for installing the door leaf is the box, it is important to determine the ratio between this element and the opening.
The overall height of the interior door together with the box can increase by 10-15 cm. The same applies to the width, and two sidewalls are taken into account. At the same time, keep in mind that you need to leave the gap between the wall and the latch for the installation, and the canvas itself should be less than the frame to prevent rubbing. The thickness of the door leaf for the interior door is consistent with the thickness of the wall itself and.
Properly installed swing doors should look organically in the interior, meet the requirements of GOST and SNiP, and also be convenient first of all for the owners themselves.
Each person knows about the need to have high-quality interior doors in the apartment - they delimit the space, give a person the opportunity to be alone, create a barrier for smells, sounds and cold. Most owners prefer to choose interior doors based on the design of the rooms, but it is worth considering other parameters.
The stores present models of domestic and European manufacturersDepending on the manufacturer, the standard door width will differ. Russian companies make doors width from 55 to 90 cm, and in Europe, standard dimensions 60 are popular; 70; 80; 90 cm.
The height of the doors will also depend on the place of production: the European standard is 2100 mm, Russian - 2000 mm, before this value was even less - 1900 mm. Among the non-standard doors there are models up to 2300 mm in height.
The width of interroom doors is chosen based on the parameters of the doorway, and it depends on the purpose of the room
The door thickness will depend on the material, for example, sliding models are thin - 20 mm, and the wooden reaches the thickness of 50 mm.
Standard sizes are suitable for most apartments, but the parameters of the openings are slightly different. To make an ideal fit door, the owners turn into a carpentry workshop where door leaf Make to order.
According to GOST, standard door canvases are manufactured:
Standard dimensions are running, suitable for all typical apartments, so manufacturers produce wide the lineup such doors.
In the living room, people often put two-sided doors. Often the doors make glass or decorate various decorative elements. The height in the standard apartment is 2000 mm, and the width varies from 1280 to 1600 cm. If this parameter is divided in two, then the width of each sash is from 640 to 800 mm.
Before installing the door, you must put the door frame in the opening for reliable fixation of the canvase and provide proper work Doors. Almost always the door installation box is sold complete with a doorpass, for easy installation manufacturers Dunk doors required fitness: Sheds, locks, platbands, locks, sometimes you can find the fasteners. The finished set for installation completely eliminates the discrepancy in size and guarantees the simplicity of installation, so it is recommended to acquire it.
The box for fixing the door leaf is made of wooden bar standard width - from 30 to 35 mm, there are models of non-standard sizes with a bar - from 15 to 40 mm thick. Standard size always guarantees the correctness of the fixation and durability of the door. Non-standard parameters are chosen if they want to increase the width of the door leaf, or if the opening is slightly different from standard sizes.
The thickness of the box will be equal to the thickness of the walls or partitions in the house. IN brick walls Mount the designs, a thickness of 75 mm, in wooden - up to 100 mm. If the selected door and its box are narrow, the builders use good items for a sublection of the opening size under the selected door. 
In most houses sizes door openings Standards and are designed to install the same typical doors. The height will be from 1940 to 2050 mm. The width depends on the designation of the room, which leads the doorway, narrow doors, 630 mm wide in the toilet and in the bath, and wide - 1600 mm in the living room.
It is important to correctly perform measurements by the simplest technology:
The widths and thickness measurements are made in three places: at the top, near the floor and in the middle. To achieve the greatest accuracy, it is recommended to measure with a level - this will allow measurements in parallel land.
If necessary, urgently measure the doorway, only platbands dismantle and see open wallSuitable for measurements.
Highly interesting solution - Doors with a hidden box. This option has the advantages over the door with platbands:
But this design has a number of negative qualities:
Before buying the doors, the owners must accurately measure all the openings in the house, because it is impossible to come to the store and buy a standard option - they are too different from each other. The variety of models will allow you to choose the perfect model for each house.
If you do not want to overpay for non-standard interior percentage doors 20-50, then you need to decide in advance with the doorway.
It is necessary to repel from the doors you like, the diversity of which is capable of satisfying even the most arrogant taste. Basic doors produce standard size: 2 meters high and 60, 70, and 80 cm wide.
Helpful information:
It is less likely to meet with a width of 40, 55 and 90 cm. And 1.9 meters high. The thickness of the door boxes may vary in the range of 1.5-4 cm.
Depending on the room, a typical door size can be applied.
So usually put:
After plastering and alignment of the walls, the depth of the doorway will increase accordingly.
These dimensions of doorways are very difficult to overestimate. After all, if you have not taken into account them in our calculations, you may face the problem when your door box does not fit in the opening. And after all, not every opening can be increased, sometimes it is impossible, due to the features of the layout or wall design. If this bearing wall, then you will also come across a number of difficulties.
Even simple wall It is not easy to reduce from drywall, due to the transfer of metal profiles. In this case, you will have to overpay for non-standard dimensions of the interior door.
It also happens the opposite situation when the doorway is much larger than the door. Here you also overpay specialists when installing the door, for the narrowing of the opening.
An unpleasant situation may occur when as a result of a decrease, the platband will not be able to close the hole in doorway. In this case, you will need to close the unclosed sections of the wall, glue the wallpaper or lay the tile. Well, if the room is not yet pissed, and if it was pissed, you will have to transfer everything.
Therefore, at the stage of the project, you need to decide on the dimensions of the doorways, then you do not have to overpay for non-standard doors or redo the opening.
What you need to know to calculate the doorway:
Suppose you need a door with dimensions 2 by 0.8 meters and a thickness of 2.5 cm. To calculate the dimensions of the doorway, it is necessary to add box sizes to the size of the door, plus the mounted gap from 1 to 2 cm. On each side.
In the figure, the on the doorway is presented with a doorway with a door and dimensions. According to these data, we can easily obtain the width of the opening 800 + 30 + 30 + 10 + 10 + 4 + 2 \u003d 886 mm or 88.6 cm.
You can find out the width of the box on the site of the manufacturer you liked the doors.
Pay attention to the fact that the most often occurs the thickness of 7.5 cm. And therefore many manufacturers are preferring exactly this size.
If the wall is thicker or thinner, then you will need to install a good or cut box along, respectively. Without these operations, you cannot and everything will look much worse.
When making any premises, special attention is paid to the doorway. The installed cloth and the box give the room complete appearance. The order of selection and subsequent installation greatly simplifies the standard dimensions. We offer to get acquainted with existing sizes and learn recommendations for the selection of a suitable option.
Read in the article
Door structures are rarely changing. The owners are preferred to draw out openings with high-quality beautiful products capable of listening for a long time, effectively performing the following functions:
In the manufacture of typical products, manufacturers are focused on the requirements of GOST. Dimensions are focused on the satisfaction of the mass demand of customers. Living B. apartment house You can purchase a finished product that can fit into the standard opening. Its parameters will depend on the purpose of the room: in the residential rooms it is traditionally done wider than.
Standard door height can be 1900 or 2000 mm. In this case, the width of the canvas will be 550 or 600 mm in the first case, in the second - 600 ÷ 900 mm in 100 mm increments for single-media models and 1200, 1400, 1500 mm for duplex. This is less than the input systems.
Attention!Standard size products are less manufactured by individual order.
Before you give preference to a specific model, you should make sure that the width and height of the doorway will allow you to install it. For this purpose, the geometric parameters of the box are originally measured and the values \u200b\u200bof the mounting gaps are added to the obtained values, which are 1.5 ÷ 2 cm in all directions. If it is performed before the main decoration of the room, you should consider the thickness of the future.
For interroom systems, the canvas can be purchased both the same and different widths. The ratio is chosen arbitrarily. So, for the doorway, 120 cm wide can be ordered 60 cm web or 40 and 80 cm. The width of the narrow sash can be 35 cm. As a rule, it is fixed in the course of operation and only more enjoy it.
When choosing a swing design, not only the size, but also the direction of opening should be taken into account. Free space should be enough to open the sash. Otherwise, instead of the left-sided canvas, it will be possible to order right-sided.
Despite the presence of standardized conventions, most manufacturers often use their unique codes, which significantly complicates the identification process. Often, almost identical structures made at various enterprises turns out to be different name and marking.
GOST 6629-88 regulates the requirements for designation to mounted in residential buildings or public buildings. In accordance with this document, manufacturers can use the following labeling, consistently including in the designation:
| Markable characteristic | Marking | Decoding |
| Type of product | P | Cloth |
| D. | Collected | |
| View of the web | TO | Swing with glass |
| G. | Deaf | |
| ABOUT | Glazed | |
| W. | Reinforced with solid aggregate | |
| Width with a box (DM) with an additional indication of features | ||
| P | with a spill | |
| N. | with influx | |
| L. | left-sided | |
| Height (DM) | Numerical value in decimeters | |
When choosing a suitable model, its dimensions are important. The dimensions of interior dual-sized doors are somewhat different from the dimming dimensions. We offer to familiarize yourself with the standard parameters to make it easier to make a choice.
To purchase a cloth, you need to know the dimensions of the doorway. The standard prescribes the manufacture of products having the following parameters:
| Height, mm. | Width, mm. |
| 2000 | 600 |
| 700 | |
| 800 | |
| 900 | |
| 190 | 600 |
| 550 |
The door frame is a P-shaped structure installed around the perimeter of the opening. The dimensions of the door box should relate to the settings of the sash and the opening in which it will be mounted. When choosing, not only the mounted gap between the web and the box should be taken into account, but also the gap, which is left between the wall and the mounting loutine. Taking into account these parameters, the width of the door frame is selected.
For the manufacture of the box, bars are used in different sizes. Their width can be 1.5 ÷ 4.5 cm, although it is optimal to be 3 ÷ 3.5 cm. In this case, the correctly installed structure has a sufficient margin of strength and reliability. The thickness of the box is correlated with a thickness of a simple. In wooden buildings, it is 10 cm, in bricks - 7.5 cm.
If the wall is still erected, the dimensions of door openings are determined by the standard. The parameters of door structures with frame and fittings are taken into account. To the width of the sash it is necessary to add a double gap and the thickness of the box. Standard value is 100 cm.
To determine the height of the opening to the height of the panel, in addition to mounting gaps, add the distance to be left for enough air exchange. Usually such a gap is 1 cm, but in houses with liquefied gas It can increase to 1.5 ÷ 2 cm. As a result, the standard height will be 205 ÷ 210 cm.
Manufacturers offer models with various linear parameters. The largest spread of 35 or 40 mm thick was obtained. Such is the size of interior doors with the box "Standard". Less frequently encounter the web with a transverse size of 36 and 38 mm. If an array of wood was used for the manufacture of the door, this parameter can reach 45 mm. In the thickness of the sash, the minimum is at least 20 mm.
If installing the standard product is not possible, it is worth paying attention to the doors of interroom non-standard sizes. This is a good opportunity to add the interior of the room of uniqueness and style and make it properly. When developing a design, it is necessary to take into account the installation location. Especially if the canvas will have large sizes and weight, and plasterboard was used for the manufacture of the wall. When working out design, remember that:
Manufacturers offer a large assortment of doors differing in cost and design. The price largely depends on the characteristics of the material used for the manufacture of a particular product. The choice can be made in favor. budget options and exclusive products made of expensive materials.
The most popular are interior doors made of wood,
Manufacturers offer ready solutions, It is necessary only to choose the appropriate option. Standard interior doors sizes with a box can be completed different. The choice is made depending on the stylistic design of a particular premises and financial capabilities. Do not save on fittings, not to reduce the service life of the mounted design.
Thus, the size with the box can differ significantly. Before the purchase of the model you like, the opening should be performed correctly. Share in the comments, what doors are at your home, and why you preferred this model.
Perhaps, little that can be changed in the repair of an apartment or a private house, without arranging global rules and without spending significant efforts or financial resources so that it has such a practical and aesthetic effect, as if you change the interior doors.
After all, no matter how beautiful wallpaper Or flooring, leaving the room, the latter, which fixes our consciousness, is the decor and the quality of the stem (web) with its framing. Therefore, similar final stroke Largely affects our design perception and coziness of the premises in general.
With marking, which is a passport of the product, not everything is so unequivocal. On the one hand, there are certain guest recommendations for designations, and on the other hand, the abundance of manufacturers sometimes contributes to the common standards. It is not uncommon that the doors manufactured according to the same technologies and having visual identity can be called and marked in various ways.
To begin with, consider the state standard that no one has canceled. So on the manufacture of wooden interior doors for residential and public buildings is still valid GOST 6629-88According to which it is indicated (in order of position in marking):
Type of product: D. - door assembly, P - door leaf.
Bald type: G. - deaf ABOUT - glazed TO - glazed swinging, W. - reinforced with solid filling.
Door height with box, in dm.
Door width with box, in dm. Additional letter indexes: L. - left door, N. - with from the outlook, P - With the threshold.
Pointer of the State Standard.
for example: DG20-10l GOST 6629-88 or P19-7LN GOST 6629-88.
Despite the fact that any self-respecting manufacturer of door products still adheres to state standards, along with the official designations of models, the entrance and individual factory codes. For example, one of the Russian brands uses such identification, releasing doors with a thickness of 40 mm and a height of 2000 mm:
Model name.
Type of web. DG - deaf Dof - with milled glass, Doof - With two milled glasses.
Width of the opening, in see
Veneer color.
Direction of discovery.
For a variant of such products on the package, you can read: "Stella" dg 60 oak lion.
Ultimately, no matter how distinguished any factory labeling from Gosban, we are more important to see the appearance, device and operational properties Doors, which will need to ask in detail from the seller and carefully examine, attached to each product, a corporate passport with its characteristics and installation guidance.
Doors to the apartment or vacation home Classified by the following parameters:
Location in the building:
Entrance (external)
Interroom (internal)
Number of cloths:
Odnipale
Biscuit
Overhead
Opening method:
Filling the door leaf:
Glazed
Functional purpose:
For residential buildings
For public
Special
By material:
Metal
Wooden
Glass
Combined.
The market does not allow to relax in search of a suitable model, offering a huge variety of door products. At the same time, under the clue, several main types of products can be distinguished:
Allow to achieve complete color combination With the surrounding design. Completed primed, fully prepared for coating with decorative interior compositions.
In this product group, it is necessary to highlight two subspecies - elite and budget orientation. The expensive segment of the doors under painting is produced for the so-called hidden editing. After installation and tinting of a similar product, only the protruding handle may testify about the presence of a passage in the wall.
Budget models can be found in many public institutions, they are also used everywhere in the "economy" repairs of apartments and as temporary options. Present textured MDF coating on a barcase brusade. Their main advantage is the lowest price among all door structures.
Enroll in the trading network ready to install. In many respects, the device resembles the previous budget class. However, the polymer film-resistant pollution is a coating that can imitate any decorative material.
Can be filled with heat and soundproofing materials: corrugated cardboard, minorvata, polyurethane foam or foam. There are models with smooth or textured surfaces, as well as with profiled linings from pressed MDF.
Are the next, higher level in quality and appearance. The basis for them, all the same frame MDF with aggregates different species. Through the bases are pasted the finest sections (0.7 mm) wood of valuable breeds - veneer, which are then vacked. As a result, it turns out a complete imitation of the product from a massive material, but with a smaller weighing and an acceptable price.
Probably you should not praise the products from a fully natural material once again. In addition to all its advantages, such a door will add sophistication and comfort to any interior if you are ready to pay for its high cost. However, it is not necessary and forget that wood is very sensitive to moisture drops, therefore, for the long service of such elite products, mandatory control of the microclimate in the room is required.
Also belong to the high price segment in the market proposals of the door products. Help in the implementation of special design sizes, and are also ideal for installation at the entrances to the bathrooms, shower cabins, saunas and other places with high humidity. There are transparent, translucent, matte, of stained glass and with milling surface.
Serve good decision For exits on loggia, terraces, as well as for rawrooms, like a cheap alternative to glass doors. Have excellent qualities for noise insulation and heat retention. The surfaces of products can be laminized by films for any natural material
If you do not take into account the non-standard approaches of some private customers who have a binding of door dimensions based on subjective queries and desires, then most of the manufacturers are focused on the standard openings of typical buildings of the Soviet period. And why to reinvent the bike - from the point of view of the ergonomics of the door products, designed for the physiology of the human body, has long been invented and thought out.
At the same time, the share of individual queries (concerned about the size of products) on the market is small, therefore, it is successfully replenished by the efforts of small private manufacturers, although they are much more expensive than typical models.
The ratios of the size of door openings and doors (door frame + canvas) according to domestic SNiP. From the tables below, you can find out the doorway size for a width door, for example 80 cm.
| Door sizes, mm | Dimensions of the opening, mm | |
| Width height | Width | Height |
| 600*2000 | 680-710 | 2050-2070 |
| 700*2000 | 780-810 | 2050-2070 |
| 800*2000 | 880-910 | 2050-2070 |
| 900x2000. | 980-1010 | 2050-2070 |
| 600*1900 | 680-710 | 1950-1970 |
| 550*1900 | 630-660 | 1950-1970 |
| 600+600*2000 | 1280-1310 | 2050-2070 |
The DIN-defined Treatment Treatment:
| Door sizes, mm | Dimensions of the opening, mm | |
| Width height | Width | Height |
| 600x2000. | 700-740 | 2060-2080 |
| 700*2000 | 800-840 | 2060-2080 |
| 800x2000. | 900-940 | 2060-2080 |
| 900x2000. | 1000-1040 | 2060-2080 |
| 600+600*2000 | 1340-1400 | 2060-2080 |
The very first, speaking of the size of the doors, both swing and sliding, any of us implies the width of the canvas, which we will use daily. Somewhere you need and want to sew, but somewhere quite a narrow stem. Gosban Proven Recommendations offer the following parameters:
For bathrooms - 600 mm,
For kitchens - 700 mm,
For residential rooms - 800 mm.
If we consider real market products, then its range (with adjustment to requests for modern consumers) is somewhat wider:
For bathrooms - 550 mm and 600 mm,
For kitchens - 700 mm,
For residential rooms - 800 mm and 900 mm.
We will not unkindly forget bivalve doors, because they often emphasize the special status of living rooms or passes on the terraces. Usually they are made up of the same standard cloths in equal and unequal combinations, for example: 600+600=1200 mM. or 600+800=1400 mM.. Also for "dvs" apply and narrowed segments 400 mm - 400 + 400 \u003d 800 mm or 400 + 800 \u003d 1200 mm.
If you repel from the domestic "classics", then it has been preserved in sentences 1900 mm and 2000 mmAlthough the European standard is often found now - 2100 mm. Higher products can be installed - 2300 mm And even under the ceiling. It is clear that such "giants" is more convenient to use in the sliding performance.
Is it always so? What does this parameter affect? Of course, massive thick lines perfectly emphasize the interiors of the living rooms, especially those performed in ampir styles, Baroque, Renaissance, but thin screen and sliding partitions will become an excellent accession of the passages in the storage room or dressing rooms.
The thicker, the door, it is harder (in its group of constructive solutions and the type of materials), therefore, the requirements for its attachments will be higher, it may be necessary to install additional loops, which in the aggregate will lead to the appreciation of the entire product. Therefore, the choice of canvas by the criterion of massiveness, as in other parameters, should be based on rationality and optimality.
Typical products prevailing in the market have thickness in the size range 30-40 mm. Already in this fork of parameters, most often you can meet the doors 35 mm and 40 mmas well as with intermediate values 36 mm and 38 mm.
In addition to the specified running sizes, the sliding MDF doors partitions can be completely thin - from 20 mmBut the products of the enterprises from the wood array is unlikely to be produced with a cross section of the base less 40 mm (can reach up to 50 or more for special marks). It is impossible not to note that came to private interiors relatively recently, but gaining popularity, the doors from the kalenic glass, the thickness of which starts from 8 mm.
Making frooms, for the purchase of a new door, keep in mind that he must be at least 30 mm More dimensions boxes on the upper edge and width. The installation clearance will be required to adjust the products with wedges, followed by fixation mounting foam. Of course, this value is relevant for the correct vertical and horizontal opening.
Most boxes make thick 35 mm. Those. Product width envelope with web 800 mm will be 870 mm (+35 mm * 2). Similarly increases size in height, the truth also needs to be taken into account, there is or there is no threshold.
Thick makers better hold warm and counteract noise from adjacent rooms.
Installing the box before installing outdoor coatingsCarefully calculate the level of the pure surface. If the door becomes restarted to the floor, then it is very difficult to cut it on its own on its own, and it will not make a similar one with each model.
In conclusion, we can say that interroom door designWith the visible simplicity of the device, it is quite sensitive to installation errors. Therefore, or its installation and configuration takes away from you a lot of time, or you will have to attract narrow-profile specialists.
