Decorative Vases will make design garden plot finished. They can be purchased in garden centers or make own hands. Consider ways how to make a vase with your own hands from various materials.
color vases with their own hands. Photo master class
For the manufacture of a street vase from the stump with their own hands, you must first pick up a suitable tree. It may be a thick base of the trunk or a small snag. The decorativeness of the vase depends on the shape of the tree and the texture of its surface.
Begin to make a vase with their own hands from the definition sizes. Optimal height is forty centimeters. Superior scolded with chainsaw. In this case, it turns out a smooth slice and the bark is not damaged, which adorns the surface of the future vase.
On the surface of hemp placed a circle. Internal content dried out Using the cone type drill. First, they make holes in a depth of ten centimeters around the perimeter, then knocked out the wood with mechanical bit and complete the processing of the walls by conventional chisel.
vases for the garden do it yourself. Photo
The inner surface of such a garden vase is processed morilka. For this, the composition is poured into a small glass and painting brush Apply on all surfaces of the product, trying not to leave non-crushed plots. Additionally, you can use various decorative elements.
Founded chubbanks nail to the dried and processed bottom. For it, it can be used as a suitable diameter. Parts of one circle are connected by a construction staple on the inside. The next row put so that the seams are constantly shifted. Among themselves the rows are also connected by the stapler.
street vases made of stumps with their own hands. Photo
Inside the received vase, we put clay or plastic container suitable size. Putty soil and planted flowers
From cement with the addition of other components, you can make both large colors for flowers and relatively small ones.
To make a vase big size required plastic form With parameters 53 cm in diameter and 23 cm in height.
Solution We make from two parts of white cement, one piece of perlite (agroperlitis) and two parts of the rigorous peat. As a measuring container, you can take a two-liter bucket. The mixture of three components is divorced by water until the mass of thick consistency is obtained.
vasons for giving with their own hands from cement. Photo
Since such a vase is heavy enough, it is better to immediately do it in a permanent place.
To make the Cement Vase, with your own hands, take a plastic pot, which is a shape, and linse it with a thin film. Cellofan must be reappeared so that non-clear folds are not imprinted on the surface.
First lay the solution to the bottom. The layer thickness should be approximately four or five centimeters. To control the thickness, matches or toothpicks are excellent.
To improve the strength of such a large product, you can install metal wire frame or other reinforcing design. It is possible to strengthen the composition to add to it about the handful of crushed fiberglass. Since the Vazone is large enough, and put the large volumes of cement composition with hands, it will have to do it fractionally. It will take about four or five zones.
Do not forget when making garden vases with their own hands and about drainage. It is done, putting a plug on the bottom, wrapped in a film.
You can make this vase multicolored. To do this, the cement mixture is divided into parts. They add different dyes. The multicolored mixture is placed on the inner surface alternately, which makes the ready-made container of motley.
After the whole surface is lined with a mixture, the product is closed cellofan film And leave about ten days. During this time, the cement mixture will freeze and gain strength. If the product dries too fast, it will be necessary to moisten it.
Eight days check availability. To do this, tapping on the surface of the cement. If the sound is negligent, then the vase is removed from the form along with the film.
After treatment with a brush, the vase is washed with water and dried slightly. Further, his words are wrapped with a film so that the mixture continued to harden.
After about a week or two material will acquire a lighter shade. This is a sign that the film is time to shoot, but to put the Vase to the final place.
From such cement mix You can make small vases with your own hands. For them take any forms. It can be old fruit vases, flower pots and buckets, basins and dishes. Manufacturing technology is the same as for a large vase.
To perform such a flower vase, a mixture of the following components are used with their own hands. Take one piece of gray cement, one part of the vermiculite and two parts of the riding peat.
As the basis take a wire fire frame and a five-liter plastic bottle, which is trimmed at the desired height.
The frame from the fan is lined with a film. It will take three layers so that the mixture is not allowed between the rods too much. After the mixture is freezing, the original carved surface will be obtained. It should only be slightly treated with a metal brush and the vase from cement is almost ready.
For decoration pricework can be used and practically throwing materials, for example, old car tires. To make tire vases with their own hands, you should choose the source material of the desired size. It is best for the creation of carved products a winter unwanted rubber suitable, which is softer and thin.
tire Vasons with their own hands. Photo
Consider how to make a tire vase with your own hands similar to a flower. To do this, first with chalk paint the contour on the side of the tire.
When the petals are cut on the tire make small longitudinal slots. They are at a distance of five or ten centimeters from each other and facilitate the process of turning the tire.
Remove the product is not easy. This requires physical effort, but after a small plot is turned out, the process is accelerated.
After that, it remains only to decorate the finished product. There are other options for the manufacture of tires from the tires with their own hands.
From a large barrel one hundred and fifty liters, two tanks can get at once. To do this, in the middle of the barrels mark the place of the cut by which they are saw into two parts. lobzik.
The edgesprocessing with a special tool so that there are no burstles.
Outside to the bottom attach two bruckSo that the Vase is easier to move.
The resulting workpiece is trimmed wooden planks. They can be placed online or flashes.
Nails are clogged with a special pistol. From the inside, they are raised by a hammer.
Top rim Make from dusk connected at an angle. Fasten it with nails and glue.
Wooden finish can be covered with varnish or paint in suitable color. Vase is ready to plant flowers in it.
This embodiment looks spectacular and makes even the most familiar plants unusual.
The cavities inside the blocks are excellent for planting and growing plants. Some manufacturers even began to produce special hollow elements for landscape design.
For the manufacture of street vases from silicate blocks, with their own hands it follows think up designSo that it was stable and had enough space for plants. Next is purchased required Material.
In blocks should be drainage, So that excess water leave. The base is chosen quite strong.
The base is glued to the bottom of silicate blocks. Then the design is collected from the resulting elements. Blocks with each other are connected using glue.
Gradually building tiers, it is necessary to fill the ground.
Read more for work thin sticksFor example, from ice cream. They are glued to wooden lamp.
Repeating processes make another three sides.
Then stick sticks on top of two sides.
The surface of the resulting container is polished and stained.
It turns out a small romp, which put the container with flowers.
Polyfoam common material and people often interest how to make a vase with their own hands from it.
First drink rectangular billets For walls that are connected by glue by self-draws. Then the container is covered plastering mix in several layers with reinforcement plastic mesh. When the mixture is dry, the surface is cleaned with irregularities. The next stage of painting. After that, the finishing layer is applied decorative plaster. The product looks like cast from concrete.
To do garden Vase do it yourself from wooden pallet. To do this, it is gently disassembled on the boards.
All boards having a length of 80cm, we saw in half. The boards with a length of 120cm, mark on three parts of 38cm and cutting, making a mowed slice at an angle of thirty degrees.
Boards with slices connect using self-tapping screws. It turns out a hexagon. To each of his board we attach the leg.
Similarly, we collect the second hexagon.
We collect the bottom of the vase. For this, between the legs, fasten the transverse board. It is placed on the bottom board and freamed them to the edges of the hexagon of self-draws.
It turns out durable designwhich should be processed by an antiseptic. It can be decorated with any ways.
Each owner wants, leaving home, admire his site, whether a private house or cottage. One of the receptions for decorating and making a variety to the site - to position in some places interesting street vases for flowers. They may be dwarf trees and so on.
Below will be discussed which vases are, where it is better to arrange them, as from what can be made of tanks.
Previously, similar containers, bags and vases were used only for growing capricious plants. They were located specialized soil, excellent in composition from ordinary earth in the flower bed.
Now different and beautiful containers are used for conventional colors to diversify ordinary polysdents and verandas.
It is possible to divide the street vases for flowers into several categories:
As for the form - tanks can be any. There are both standard (round, square, rectangular) and unusual (irregular shape). Here everything is limited only by the fantasy of the owner of the house or cottage. Materials can also be chosen varied - natural (for example, stump or logs), concrete, fabric, metal, wood.
Select the material for the vase must be focused on the overall style of the zone of its location.
Each raw material has its pros and cons, career features.
We will analyze more common materials for the manufacture of street vases for flowers and care:
The location of the vases largely depends on the wishes of the owner of the garden itself. But still do not forget that it is necessary to put them appropriate and convenient.
Vases installed on the sides of the porch, revive the entrance to the house. Also well have them about or summer kitchen.
If you have a wide enough scene, street vases will be appropriate along the wall of the house - the flowers will bring a living note on the background of stone walls. 
Bulky vases are not appropriate in small gardens. Just as miniature will be lost on the expanses of the Big Garden.
A permanent place for vases needs to be chosen carefully. This is sufficiently heavy products, and an alarming plant is once again not recommended.
Vases with flowers well highlight the entrance to the garden area, buildings. Do not forget about the style - if you have a gazebo from the tree, then the concrete vases will not fit.
It is easier and faster to buy ready-made vases in the right style or order a manufacturer of your sketch. But it will make an order of magnitude more expensive than making vases for giving with your own hands. This, of course, will need time, strength and fantasy, but it is worth it. We give a few examples.
With such, at first glance, difficult, the task will be cope with even a fair sex. The simplest rompa of concrete is done from any fabric, concrete mix and buckets. You can use residual solutions after construction. 
We put the fabric into a liquid mixture and fit well. When the whole rag was impregnated with a solution, take it out and hang to dry on any bucket. 
Place the rag as in the end there should be an inverted vase.
After soaring the cement, the resulting vase should be removed from the bucket. Now you can proceed to the decor - paint in any or any colors. There is also a flight of fantasy is not limited.
To make it easier to remove the vase from the bucket, the last one is better to lubricate. Suitable working or any oil.
There is a variant of more expensive - production with a special form for vases. It will have to buy it. For the result, you will be pleased - it turns out a beautiful neat vase. Yes, and there is nothing difficult in the manufacture - to knead the solution, pour it into the shape and wait for the frozen. 
By the way, even forms can be made independently. For this, cardboard and tape will suit. Cut out outdoor details of the future form, fasten them with high-quality durable tape. Then install the inner part (where the land for the plant will fall down) and pour everything with a solution.
The most time consuming method for the manufacture of street concrete pymbols for flowers - modeling. Here you will need a frame and some (at least minimal) skills of modeling. For that, the form of the vason does not depend on anything. It will be necessary to work in gradually and the use of additional additives and primers.
As it can be seen to make vases from cement, with their own hands it is not difficult.
Not the most complicated, but not such a simple option. To work, the old tire with disk, chalk and hacksaw is required.
So, you first need to draw the contour of the edge of the vase (it is the line of the cut) chalk. It is not done in the middle of the tire, but closer to the disk on the one hand.
No studded tires are suitable for the manufacture of vases - they are easier to cut.
After the mark you need to make a cut. Be prepared for what to cut will not be easy.
When the tire is cut it to turn it out. So it turns out the vase will be from rubber, and the disk will play the role of her legs.
Made with your own hands, you can cover suitable paint or paint.
An interesting solution is offered by designers - the manufacture of vases and sadroom furniture From the grid and boulders. They look very interesting and unusual, work does not require special skills, and most importantly, such street vases can be made with their own hands.
For work it will be necessary special metal grid, geotextile and boulders.
Collect the hollow frame from the grid. In the emptiness of the walls we fall asleep stones. In conclusion, it is fixed to the walls from the inside geotextile - it will not give the soil to leak between the stones and will pass the water.
At the bottom it is better to pour drainage - layer of sand or clay. Beautiful flowers for flowers are ready!
Such a construction will no longer work out, so one hundred immediately choose a permanent place for it.
Vases for the garden can be made of wood. Even the pallets remaining after construction are suitable.
To work will be required:
For the manufacture of such vases it will take some carpentry skills. First you need to think over the size of the future product. It is best to do it on paper.
In the corners, you can mount the narrow bars or cut locks.
After all the boards are cooked, you need to handle their sandpaper and apply a special impregnation. The latter will prevent wood rotting in all weather conditions.
When the coating can be fastened. In the end, it remains only to decorate the resulting vases.
We described the most accessible and popular manufacturers. Also, barrels are suitable as street vases for flowers, the old car, a bike with a basket, a few old pots, prepared stump and so on. In fact, fantasy is where to get roaring.
You can diversify and decorate the garden without larger investments. It is enough just to find time and give the will of his fantasy. Finally, browse the photos of street forged colors - they are very inspired by: 
Cement and fabric vases with their own hands for the garden - the original find, which is able to decorate any naudal landscape. Despite the fact that they appeared in the household courtyards only a few years ago, the history of the existence of such elements of the decor began for quite a long time.
The use of street vases made of concrete, in landscape design goes back to the ancient garden and park arts, the works of which were placed in the palaces. In the front alley and parks, the mandatory attribute were exquisite bowls made in the baroque style. We gradually such vases began to occupy an honorable place in landscaping of urban parks and gardens, public buildings, parade. Concrete street flowers are widely used to decorate entry in housing, sites intended for recreation, open terraces. In the gardens, they perform the roles of small architectural forms - their use in the landscape allows you to slightly dilute the monotonous unity of the green grass carpet and create attractive visual accents.
Show all
To independently make concrete florals, you will not need special time-consuming actions.It will be necessary to preserve ingredients for the manufacture of the working solution and choose the container where the concrete will suffer. Pick up forms with which the product will be performed.
Decorative vases for giving with their own hands make it not so difficult if you have a fantasy and the desire to create. Wonderful garden decorations are performed in any forms - they can be made of round or square, rectangular, abstract.
There are many materials that are suitable for casting. These are plastic bottles with different capacity, and children's rubber balls, and thase from metal or plastic. Amazing beauty can turn out potatoes from fabric and cement - you can create a real masterpiece with your own hands.
The first flower beds of fabric and cement probably turned out by chance. After all, many people after repair are simply thrown into a dump Impregnated with a cloth with cement mortar. But if you slightly put on the cloth and fix it with the help of a solution, it will turn out unusual and very beautiful.
The simplest variant of the concrete floral can be obtained as follows:
You can make a vase for the garden with your own hands exactly what you have thought it. The resulting product can be painted with bright colors or just leave as it turned out.
If you liked the idea of \u200b\u200bmaking ornamental flowers and you want to build such garde pumps, you can safely begin work. Needleworks always attract a lot of attention, they can be proud to show friends and acquaintances. But sometimes you want something more unusual or bright. Homemade florals you can decorate as you want.
For example, you may not like the rough outer surface of the homemade vase. You can, after a small alteration, turn it into a glossy. To do this, in the manufacture of the mixture, select the cement and sand of small fractions or add to the mixture dry rotband plaster. For breeding the mixture, use silicate glue instead of water.
Polyethylene is used to form a glossy surface. The main method of manufacturing will be needed by the following additions:
The desired gloss was obtained, but small defects remained on the product. How can this be fixed? Take a silent and wake the creamy vase with silicate glue, without diluting it. So you can hide all admitted defects. In the adhesive composition additionally you can mix the paint - so you get a pot the desired color and add it the outer surface of the shine.
In the process of manufacturing a vase, you can make a decoupage. To make an outer decorative layer, you will need a thin printed fabric or loose paper with a pattern. For example, wallpaper, old newspapers fit well. No need to use glossy magazines, posters, vinyl wallpapers.
In making a sequence of actions, the same is observed as when performing a glossy surface. You just need to add a layer with a pattern. The phased procedure is as follows:
If, after drying the form, you left the protrusions unnecessary to you, they should be trimmed with a hacksaw. Formed roughness, it is possible to sand with a large emery mesh - it is easy to find in business stores.
So that the vases are beautiful, the manufacture of the working solution is desirable to pay more attention.
This will provide it with the desired density and the speed of frost.
To obtain a concrete solution for work, the following substances are needed:
Portland cement comes well, white cement. Gravel to choose a fraction of 3-7 mm, the sand is suitable small-grained. Everything is mixed in the tank in the ratio of 2 part of the sand, 1 - cement and gravel. Water is added in small portions before receiving the consistency of the liquid sour cream.
In order for the finished product of it is lightweight, a small ceramzite is added to the knead. When using such ingredients, part of the gravel is better replaced by it.
Forms after the fill must be covered with a film or wetted fabric - the hardening is thus coming much slower. So you can prevent the formation of cracks when the concrete is drying. The design must be disassembled no earlier than 3-4 days later. The surface of the resulting product is removing using the brush and skins, roughness cut.
You can independently prepare a material that is imitation of tuff or sandstone. For this prepare a solution of 1 part of cement, 1 - sand, 2 - peat. Dilute a mixture with water before receiving a consistency potato mashed potatoes. With the help of modeling mass attach the necessary shape. You can use art concrete for cooking - it allows you to make durable, elegant and lighter products.
It is most convenient to make concrete caspo with staining. Suitable for this acrylic paints: They are most resistant to atmospheric influences. It is possible in the manufacture of a concrete mix, add coloring pigment to it.
The product in front of the color is dried and applied primer. So that the painted Vase looked beautifully, the colors are better to choose not very bright, close to natural - the main point for focusing the view should be plants inside the porridge, whose task to create a natural framing is. You can arrange a decorative painting on the surface in several colors, a vegetable composition, a geometric pattern, abstract patterns.
A layer of gravel, ceramzit, crushes - for drainage are poured on the bottom of the concrete. A layer of nutrient soil is embanked from above, which should include trace elements and mineral additives. In the soil for annual colors there should be many organic matter. To provide organic fertilizers It makes peat, compost or overwhelmed manure.
Those dacifics who are seriously going to grow flowers in street vases, you should know that before the onset of winter time it is necessary to cook flower shoes for the next season. In winter, in frosts, the soil is completely freezing in vases. Therefore, in order to create flower arrangements in homemade caspo, it is better to choose annual plants.
It is easy to paint the seedlings of annuals with your own hands. In flowelers to achieve necessary effect Plants standing with bright color and leaves with decorative appearance. It may be velvets, dahlia annual, Begonias, Koleus, Lion Zev. A good visual impression produce ampellast plants - it is nasturtium, petunia, nasturtiums. In concrete vases, you can thicken a landing in order to quickly reach the desired effect. It should be understood that with such a small volume of the Earth, it will quickly dispel, sheer wheels are required regular.
In flower jackets you can place replaceable compositions. In the spring, it is better to be better made up of a gloring bulbous plants - it can be daffodils, hyacinths, crocuses, tulips. Cineraria, lavater, Viola are suitable for summer compositions. In the fall, beautiful flowering is provided by Astrami, heliotrops, petunias.
Decoration of the cottage - It's interesting and long-term business, and still causing solid material costs. In order to save money, numerous accessories for the purpose of decoration of the plot can be made with their own hands. This time the conversation will go on how to produce outdoor vases with a flower stand. Consider the production process of products from different materials.
Floral Vases and Pots with a stand from different materials for the street not only serve as container for suitable soil of garden plants, but also suggest one with best methods Add bright accents cottage plot. Street vases with a stand for different colors can have varied figures, and their decor will fill the garden-park composition.
Wood, maybe not best choice For the production of street vases for the garden, however, extremely inexpensive, malleable, easy in processing. Therefore, well-known. Wooden vases With a stand for different colors, you can produce with cutting powder, moisture-resistant plywood, wooden bar, tree trunks, stumps, barrels and pads.
If you are striving for a pot with a stand for a long time holding your own color and I have not sat down, but you don't want to paint it in any way (such as oil), you will need to purchase oil for wood. It gives wood colors. At the same time, this oil "preserves" the surface, protects against fungi, mold, insects.
The easiest way to make vases street with skias rectangular or square shape For the garden, for what:
In the most elementary form to the bottom, in the corners, you can jarny 4 not very large pieces of blackboard. There is a desire - you can try to make more potted feet.
Ringing boards, do not knock the bar extremely tight. When watering, they will expand and, if they are tightly tied, they can raise. Nevertheless, very large gaps should not be kept - the land through the base may wake up.
Rubber - Supplement Materialcapable of taking different shapes. This feature of rubber makes it possible to form with it the most unusual vase figures with your own hands. Cottage, beautifully decorated with floral vases, amazing colors, will be a real corner of paradise. Unusual gardens formed from worn tires can be decorating so that few people guess that the starting material was a tire.
The owners of cottages apply all their own creative fiction to produce a piece of country art from an unnecessary trash. Landing in this kind of color vase is made early in spring, and during total country periodsurrounding can enjoy bright colors. It is the flower beds and flowers for flowers with their own hands creating with old wheels. Simple option Flower flower flower is the soil filling, landing inward colors. It was the tire that became the most popular material in order to create daccasions. Can not imagine how to make garden vases with their own hands?
We offer instructions for the production of vase for the garden with old car tire:
After selecting the appointment and sizes of the required vase need about thinking about materialsfrom which he will be made. More famous are vases for colors Street concrete, stone and plastic. In addition, it is often used such material as clay. The plasticity of clay makes it possible to form unique big figures and textures, however, certainly they must be covered with special icing - in order to preserve humidity and increasing resistance to different temperatures.
Vasons with stone are often placed in specialized fixed courses and stands, and often embellished atlay embossed patterns. Their main advantages are reliability and special painting. The stone vases for the garden are well holding back the water, which does not allow to dry the soil.
Concrete colors forms due to impressive size and large weight will be used mainly to decorate large zones. You can make concrete street vases in the form of large VAZ, which is pretty aesthetic and practical method of falling flowers, compared with ordinary flower beds. Often concrete street vases are modular containers. Their design consists of concreted base and vases for plants from concrete or stone crumbs. In addition, concrete vases are made with using reinforcing gridthat increases reliability of products.
With the use of cement and other components, perform a pot for flowers as a large volume and not very:
Since the prepared concrete vessel will succeed in difficult, it is recommended to engage in its formation immediately in the required site.
After completing the laying of the mixture, the design is covered with a film for 10 days. During this time, the concrete must completely frozen and strengthen. However, if the design starts drying overly rapidly, then the product is additionally wetted.
The most economical view of the decoration of the garden plot near the house is the vase of plastic. Kashpo is often made in colorful, saturated colors, and themselves are represented by self-sufficient decor element. The price of plastic porridge, vases is rather low. One with the undisputed advantages of plastic street porridges, the vases are their mobility due to a small weight. And thanks to new technologies, plastic kashpo can imitate different surfaces - clay, stone, etc. Vases, porridge for colors Street and pots from plastics are able to keep moisture well without giving planting plants.
If there is an insurmountable desire to make your own creative ideas in life, you need to think about how to make street flower pot do it yourself. Suitable porridge can be made from drawers, barrels, pads, tackle, large dishes, etc. The main rule is the processing of products by antiseptics and coating of planes with oil or varnish.
Also with your own hands the street pot can be made from clay. In order to model both clay and decorative white and I. Such clay for kashpo It has many advantages - it is not necessary to burn, it is allowed to carry out without blanks, and the speed of its frozen is extremely high. In addition, it is easily and simply to decorate.
Creating a large street vessel for plants with their own hands, it is necessary to think about its design. Parts of the mirrors, small pebbles, shells, coins, beads, etc. will be used as decor. All Kashpo components must be fixed with epoxy resin or glue.
This species will look in the countryside as uniquely and impressive, it is interesting to convert the most accepted vegetation. The place formed inside the silicate structures is well suited for landing and growing various plants and colors. It should be noted that certain manufacturers today even started deliberately producing hollow elements intended for the arrangement and variety of landscape design of the countryside.
When using silicate structures in order to create a street pot near the house, you need to pre-thoroughly think about the design of the upcoming element of the landscape, so that it remains extremely stable and allowed to be placed from the inside necessary for planting the plant. After that, the necessary material is taken. Do not forget about drainage through which excessive moisture will be eliminated. In addition, the base should also be reliable and strong.
The base is glued to the first blocks. After that, the design is collected. Fixing the structures is made at the expense of glue. A similar way, a tier for a tier is gradually formed. For the purpose of greater fortress, the first rows must be filled with soil.
Street flower pots near the house from different materials, including metal vases produced by their own hands, will add comfort and originality to any corner of your cottage.
The garden will be wonderfully transformed if you decorate it with the items made with your own hands. The greatest satisfaction of the garden designer gets if it is possible to combine beauty and benefit. From this point of view, the most winning decor - street porridge and vases that will not only decorate outdoor territory, but also the favorite flowers.
Gloomy tires rarely fit into the garden design. But really to decorate them beyond recognition. For example, imitate brickwork.
Decorative cheek-well built from tires, timber and metal tile
Unique buses from tires are made quickly.
Step-by-step instruction:
When cutting with a knife, the blade is worth wing with solidol or machine oil for better sliding
Cover the rubber to the primer and apply the drawing.
Oil or acrylic paints are used for street vase
To fully disguise, put the grid on the bus, then thick cement mortar with sand and stick the tile.
Tiled or pebbles Cover from a tire looks very stylish
Draw on a tires landscape and put the host bright vase in the form of a parrot will decorate an unsightly place. Vasons in the form of a cup of tires in the form of a kettle are very elegant. dining area Vase from a tire in green colors organically fits into any landscape Vase from a tire in the form of a cup suitable for ampel plants
The usual garbage will serve as beauty, for example, various containers. Instantly transform plastic if it is punctured by twine.
For the stickers of the twine on the street Vazone will suit any waterproof glue
Excellent option - Decor of burlap.
Rough burlap shares fragility of colors
Trimming branches will also reliably hide plastic.
The branches to the vancture are glued with glue or tied with twine
Apply a thermoclaster pattern on the cachep and cover acrylic paint.
To create a volumetric pattern, you will need a thermopystole
Or place the bottles in gift bags.
Kashpo from gift bags - fast way Plastic bottles
Cutting a part of the canister, create a porridge for the wall.
The surface of the canister is lubricated with glue and sprinkled with sand, to create the effect of the "sandy" face
Secure glass bottles on the fence and put in them so much and cocked.
To cut a glass bottle, wrap it with a copper wire in a cutting place, heat the ends with a lighter and lower in cold water
If you cut a plastic bottle in half and glue the neck to the bottom, it turns out the original vase.
If you paint the vase with silver or gold paint, the feeling that metal pumms will arise
Attract children so that they participate in the creation of unusual pots.
Garden vases are created from any plastic capacities
It looks great for a mini glass flower garden. The basis (bucket or tire) is deceived by a thick cement mortar with sand. Then stacked the ranks of bottles, pressing the neck into the solution based on.
Think in advance the location of the vase because moving it hard
Eco-friendly materials are included. Plaster plastic properties are famous for the best plastic properties. Laps of fabric moistened in the gypsum solution are wound on any container or wire frame, until the desired wall thickness is achieved. When the product dry, it is grinding, ground, paint or stick on the walls decor.
In the manufacture of kashpo gypsum can be replaced with a putty or alabaster
The decor uses pebbles, shells, tiles.
If you mix the plaster with the color of the right color, we get colored seams
Romantic notch will give the garden of the birds of birds. For caspo in the form of a swan you will need:
Mix the gypsum is convenient to a special spatula
Step-by-step instruction:
Dry the figure for three days, then passionate the sandpaper. Cover the brush bird, wait for drying and paint.
Cashpi-swan is not as hard as it seems
Purchase of large volume is useful. For example, iron barrels stylize under human figures.
Ampel plants are planted from barrels, which are beautifully falling out
Or weathered with wooden slats.
Skumps are attached to a pistol for climbing nails
Wooden barrels are cut in half along.
From one barrel you can make two vases
The cut barrel is installed on a stand so that it lasts longer
It is not necessary to throw out everything that was worn out.
The second life can be given even to frank bread
Sometimes Kashpo from the older becomes a raisyn of the garden.
Exquisite porridge is obtained from bird cells
The old umbrella will be transformed if you put flowers into it.
For the umbrella longer retained decorativeness, just put pots in it with plants
Cut the old basketball ball in half a holey watering can not be suitable for watering, but the garden decorations are paint the old coat and plant the ampel flowers old flip flops and cups - a wonderful ensemble attach trimming sewer pipe To the wall and put in them Petunia, unnecessary hose Wrap around a vase 
Cook the cache-umbrella from trimming of reinforcement and iron sheet
The most organically in the garden looks products from natural materials. Among them is leading a tree.
A simple rone is performed from a conventional stump with a drill and a chisel.
Step-by-step instruction:
You can simply put a suitable pot
Cover the decorations made of wood by antiseptic so that they do not rot.
So that the logs do not ride, lean the stops in the ground
Everything that remains after the construction of the house is used to decorate the site. Bruus and boards build stylish containers for plants.
Kashpo from a tree is better to do on the legs, so it will last longer
Cachepo, painted in light gray, suitable for Garden in Provence style.
In wooden caspo drill drainage holes
If wood trimming in the barn in the barn, collect caspo in the form of a well, cars, bike.
Kashpo-well adorns the garden
If you put stumps on each other, it will be a picturesque composition 
Space in Kashbo drought-resistant plants in the porridge from the stump winning the bulbs: tulips, daffodils, crocuses 
Consider anything not treated wood quickly lose sight 
To see the texture of wood, toned with her oil. Little wood porridges from wood. Suspend in a gazebo Wooden Cacheboard will decorate the site near the house.
The main requirement for the wire for Gabion is durability
Any plastic container is easily decorated with rubble. The screws are screwed into the cascaps, between which the wire is wound, cement mortar is put on top and crushed stone is pressed.
The grid of the caprony thread or wire is needed so that the cement does not fall off from the tank
The dried products are covered with varnish.
At the top of the iron cans, holes are done through which the twine is passed
Vazon will not fall out of the attachment woven in the macrame technique.
If the design allows, attach three chains to the top of the porridge
Sometimes Kashbo is naked to a wooden rail, which is attached to the wall of a dowel-nail.
In the shelves, the shelves drill holes in which the rope is passed
After cutting firewood at the cottage there is a lot of beautiful bark, which I use to decorate vases. The bark is cut by strips of 2-3 cm wide and is attached to the pot with the help of a thermopystole. Working surfaces before gluing are diverse and degreased. If there are gaps that mask them with moss or lichen between the pieces of the cortex.
Thermocles softened into the sun, so vases, decorated with the bore, better keep in the shade
Creation of caspo from girlfriend, take care of their durability. Wooden vases treat means from rotting and drill drainage holes. Before decorating tanks with stones or tiles, wrap them with a reinforcing mesh so that the solution with the decor did not fall off.
