Wheel Flowers - Original designer solution Improvement of the country area with their own hands. You can make flower beds of different forms (oval, multi-tiered, in the form of different animal figures) and height.
Before making a flower, it is recommended to decide on the place of its installation. Choose a tire for flower beds is necessary, taking into account the following recommendations:
Before working, dirty tires are washed to prevent the fastest dullness of the saw blade and knife.
To make a flower leaf of the wheel with their own hands, the following materials will be required:
From the tools you need to buy:
To make a multi-level flower garden, use bright oil or acrylic paints. Deciding with the color range, chose several automotive tires. If the rubber is dried, then the tires are installed on each other, creating a multi-level flower leaf.
To create an original vertical flower garden, you will need several tires of various diameters. Consumables It is stacked so that it turned out the pyramid. On the top of the design put a pot with flowers. Tires are stained, and the inner space fill the earth. In such a flower, you can grow petunia, strawberries and other ampellast plants.
To make a pendant flower garden, it is recommended to fix on the tire durable cord or metal chain fixed on the tree. Before filling out the inner space of the earth, the bottom of the tire overlap. For this, the kashpo is used (the diameter must be larger than the inner circumference of the tire). You can replace rubber porridge. If there is free time, you can make a composition on any topic from the tires. If this is the topic of home tea party, then the kettle is made of 3 wheels of various diameters. The wheel with a large diameter is the bottom of the kettle. On top lay 2 tires of smaller diameter. The top wheel (the kettle cover) must be less than the bottom, but more than the second tire.
The nose and knob of the kettle are cut out of a pipe with a diameter of 30 mm. To fix the handle, it is applied to the tires. Make marking. In the noted points make cuts of the appropriate size. To make a cup, 2 tires are applied the same size and 1 bus from the truck. From the large wheel cut out a saucer. Pre-rubber is cut into a knife: the top of the wheel is cut off excess via the outer diameter, and at the bottom - by internal. The resulting structure is cheered, and on top lay 2 identical rubber. Tires are painted, filling the earth.
It is more difficult to make a flowerbed from twisted rubber. To do this, you will need:
Before cutting the automotive tires, it is recommended to decide on the shape of the petals. Previously paint them with soap or chalk. Then cut with a knife or an electrolovka. If the tire cutting is produced by a knife, then during operation it is wetted with soapy water to better overcome the resistance of the dense tire.
Before turning the tire for the flower beds, the product turns over the whole side up. Crashed with hands for cuts (bottom of the tire), while pressing on the tread, the product gently turns. If 1/2 bus is turned inside out, then it is flattened to oval. The remaining part is turned out. To perform such work, you will need to make a physical effort. The resulting flower bed is painted with monophonic or multicolored paints. Selected colors should be harmonized with other landscaped objects of the country area.
You can make a flower garden from a tire with a metal disk. For this, the wheel is stacked on smooth surface. Then the pattern of petals is cut, while you need to reach the blade to the tread. The next step is to turn the lower and top of the rubber (the disc is not removed). As a result, it turns out the original vase in the form of a flower on the leg. The top of the flower garden is painted in a bright color, and the bottom is in green. In such a design you can float the soil and plant a plant.
To make a flower garden in the form of a turtle figure, a car tire will be required. It makes slits for future paws. From another rubber cut out external part With a tread, which is then divided into 4 parts. Turtle paws are ready. Wire brackets are used for fixing them to the body. Carved elements are inserted into the slots. Behind the tail is added. For its manufacture use rubber. The turtle head is made from a plastic bottle of flat shape. You can make a head of the newspaper. A plastic tube is used as a neck. Turtle is painted. Soil is poured into the tire, flowers are planted.
Flower-swan is manufactured by similar technology as flower bed-vase. Pre-on paper is a swan scheme: tail, neck, wings, head. Then the scheme is transferred to the car tire. Then cut out the swan figure. The next step is the tire turning. Beak swan can be made of rubber, plastic or wood. The resulting item is painted with red paint.
Half heads fold together, inserting beaks between them. To fix all parts of the head, a self-tapping screws are used. They are screwed from two sides of the head on the place of future eyes. The self-tapping screws are closed with circles cut from black tape. The swan head is lifted and pressed into the tire. The resulting fold is fixed by self-drawers. Swan is painted.
Before making a flower leather from the wheels, it is recommended to determine the view of the future design. In the absence of fantasy, you can install round vases on the summer area or equip the border of them. In the latter case, it will be necessary to cut out the internal parts from the wheels, setting the resulting flower beds with a certain step. Then empty tires stick vertically between flower beds. For connecting the links of the chain, cross-cuts are made in vertical tires. Such places fasten with wire. The resulting flower garden is painted silver or bronze paint.
One-piece wheels can be used to arrange a long flower garden, combining them vertically or horizontally. From similar material you can make a flower. In the center install a large wheel, and around it - cut half tires. Recent design elements will serve as flower petals.
All of the above design ideas of the flower beds have the effect of entertainment due to the use of color gamut and different decorative elements: patterns, drawings, beads, ornaments. To originate the homemade flower bed in the original, designers recommend using beads as decor. It is fixed to the tire with high-quality glue, which interacts well with paint.
When painting flower, special attention is paid to color gamma. So that the drawings looked brightly, the color of the background is made in bright colors (pink, yellow, white, cream). Patterns and ornaments make dark paints (red, blue, black, green).
Improvement of the country area is carried out taking into account personal preferences and fantasies.
The easiest way to put an old tire on the plot, throw the land there and plant seedlings. This, of course, simply, but does not pull on the exclusive ornament. Well, we will try to improve the position. Take bright acrylic or oil paints, Choose from them some of the most combined color and paint a few tires. Then install them on each other and get a wonderful multi-level flower leaf.
The original vertical flower bed from the tires is created from several tires of different diameters, laid on each other like the pyramid. You can put a pot with flowers to the top, if the farm does not have a small tire. After painting and filling indoor space Tires Earth can be grown in the resulting flower bed ampel plants, such as petunia or strawberries.
Clutches from tires can be suspended. Fasten a solid metal chain on the tedder (thick cord, rope, etc.) and hang it on the tree. In order to fall asleep in the flower bed, the bottom of the tire must be blocked. For example, fasten inside the porridge with a diameter of a little big than the internal circle of the tire. Or put inward a dense piece of rubber inside - think for yourself, probably in the economy there is a suitable material for overlapping.
Snow-white suspended flower bed from automotive tire - spectacular "highlight" of modern style
And if you smoke a little bit, you can build a composition on the topic on the top ... well, for example, home tea party. Several tires will greatly play the role of the kettle and cups - it is enough to supplement them with distefront details - trimming the pipe and bent pieces of metal tape.
From the tire and tread, cut on equal 4 parts, you can make a flowerbed in the form of a turtle. In the tire on the sides, we make cuts and insert the trimming of the tread - it will be the paws of the turtle. Fix them with wire brackets. The tail cut out from a piece of rubber and also fix the brackets. For the neck turtle take a piece plastic pipewhere scotch tape is fixed from the crumpled newspapers. You can wear a straw or plastic panama.
This flower bed from the tires should be painted in all the "turtle" rules, otherwise it will not be clear what you wanted to portray. Draw on your head, mouth, paint the torso and paws in a bright color.
The flower beds are reminded by the puzzled vases of the rounded form, to create which it will be necessary:
1. Cut drawing of flower beds on the top of the tire
Petals can be rectangular, triangular, rounded and even wavy. To begin with, they should be drawn with chalk or soap, and then cut with a sharp knife, hacksaws or an electric bike. If you decide to use a knife, we recommend that you make it possible to make it soapy in the process of work - it will be easier to overcome the resistance of dense rubber.
Gently cut the petals with any sharp Cutting tool
2. Remove the tire inside out
Many are interested in how to unscrew the tire for the flower beds inside out, because it is not easy and requires considerable effort. To do this, turn the bus upward to that side on which we did not cut anything, take up for cuts from the bottom and, pressing on the protector, gently turning. After you can cope with about a half of the tire, flatten it into the oval and easily remove the remaining part.
3. Coloring the flower in a spectacular color
Crash the resulting flowerbed in any color that will be harmonized with the rest of the landscaped objects of your site. You can stay on a monophonic color, but it will more effectively look like a multilette, for example, in the form of strips or a bright pattern.
Let's look at how to make a flower leaf. It is understood that in order to create a flower beds, we use a tire with a metal disk in the middle. To do this, we put the wheel on a flat surface and cut out the pattern of petals, reaching a knife (or another cutting tool) to the tread.
Then we turn the top, and the lower parts of the tire without removing the disk. As a result, you will receive a kind of flower vase in the form of a flower on the leg, in which the soil falls asleep and plant plants.
After that, you need to take care of how to paint the flower of the wheel. The top can be painted in a bright "floral" shade, and the bottom - in green. Then the huge rubber flower with alive plants in the middle will bloom on your site.
Flowerba-Swan is made similarly to the flower bed-vase from a tire, the difference is only in a more complex cut-out pattern. If the flower bed for the flower beds had to form the same type of petals, then here - wings, tail, neck and swan head. We carry the scheme to the surface of the tire and start cutting the swan figure. On black circuits, the head and neck are cut out, in red - tail, on blue - wings. After that, the tire turns the same as in the two previous cases.
From a piece of rubber (wood, plastic or other material) we make the beak and stain in its red paint. Two half heads fold together, insert the beak between them and fix all parts of the head along with the help of screws. Self-tapping screws on two sides of the head in the places of future eye of our swan. Then so that the screws are not visible, they are closed with two circles cut from black tape - it will be eyes. We raise your head straight and up, slightly pressing it into the tire. At the same time, a fold is formed, which must also be fixed with self-draws.
In the last stage of work, the swan is painted - here you can show your fantasy and come up with a bird to fits any color.
Many believe that it is only an experienced specialist to develop a beautiful landscape design. But practice shows that such a point of view has nothing to do with reality. Make garden or pricework Anyone is capable - it would be a corresponding desire.
To cottage or outdoor territory It looked worthily, it often does not require high professionalism or substantial financial costs. Everybody can go to move: brick wreckage, stones, plastic bottles, old watering cans and more.
Cover flowerbed
For example, an alpine slide, which is the object of dreams of many country area owners, may well be constructed without attracting specialists. The most important thing is not to be afraid to experiment and feel free to combine different items and objects.
Interesting. Often old junk, which, it would seem, it's time to throw, can serve a good service in the design of the territory.
So, for example, a beautiful stand for a vase will be able to get a beautiful stand for a vase. Old chest, if it is cut and appropriately arrange, you can decorate any deaf wall, putting bright colors in his boxes.
Of the primary materials, more complex structures can be made, for example, having a metal rod under hand and flower pots, You can build a very interesting vertical flower bed.
Among domestic gardeners and owners of country sites are quite high demand flower beds from tires. They will be discussed.
To engage in the creation of flower beds with their own hands, it will not be necessary for special experience and knowledge. The most important thing is to have the necessary tools at hand and own basic information.
By type of design, flowerbeds from tires are:
Round flower beds from wheels - the easiest version. All that is required for the organization of a flower garden is to take tires, paint them into arbitrary colors, filling the soil and plant plants.
Interesting. To get an interesting composition of such a material like a car stroke, you can paint the wheel in bright colors And, putting on each other, form high flower beds.
As for multi-level structures, they are created from the tires of various diameters. They are placed on each other according to the principle of the toy pyramid (in the sequence of size decrease) and fill with soil. Such a design is perfect for planting ampel plants.
Multi-level tire design
Suspended Tire Flowers Allowed to Edit different ways: to the tube, chains or rope to the tree branch, etc. Only before you should not forget to overlap with some material of the bottom of the improvised kashpo.
Before entering the manufacture of flower beds from tires, you should decide on the dimensions and design.
Flowers of tires are very stylishly looking at her hands. To work, you will need a tire, a sharp knife capable of cutting thick rubber, and a marker (either chalk).
Flower flower beds Manufacturing work is performed as follows:
Flower-shaped flower
Then you need to paint the product in a beautiful color, fill the earth and plant flowers. The paint is best suited for oil. Other types of paints can suck.
Vase from the old wheel
Another interesting master class, which will be useful will lead, is dedicated to the manufacture of stylish sadovaya vase From the worn wheel. To work, you need to prepare a tire that has a disk, knife and marker. Next, operate according to the following scheme:
Important! Before pouring the land into such a vase, you need to not forget to put on the bottom of the gasket, in which small holes should be provided for removing excess water after irrigation.
This is another simple and interesting optionhow from the wheel quickly make a flower bed in the form of camomiles. For work, you will need a few tires and a sharp knife. In general, it will take no more than half an hour. Step-by-step work work looks like this:
Core chamomile shape out of flowers. As an option, it can be in the form of a circle posted from such a material as plastic bottle (Punches to the top) or stone.
Flowerbed Chamomile Tires
If you approach the process of creating clubs from tires creatively, original ideas Do not make yourself wait. Answers to questions: Is it worth using additionally plastic material, as and how to paint the wheels for the flower beds and that, as a result, put in the flower garden, there are along the way.
To create an original porridge in the form of a parrot from the old wheel, the following materials will be required:
Kashpo-parrot
The work is performed in the following order:
To turn the tire inside out, it will be necessary to make an effort. To facilitate work, it is recommended to make big cuts - to the tread. First turn one side, then, slightly flattening the tire in the oval, make it completely.
If the forces are still lacking, it should be cut into a circle part of the flower beds opposite to the petals to remove the steel cord. True, in this case, there is a risk that the design will not be good enough.
Working with a tire
To cut the tire you will need a sharp knife. First, a small hole is made in the tire. Then the cutting tool is inserted into it and the material is cut on the markup in advance. The knife should be periodically sculpting into water or machine oil. This will significantly simplify the task.
When the design is ready, it remains to paint. For this, the surface is completely degreased (for example, acetone or white spirit) and give dry.
The surface can be further primed, but this condition is not mandatory, since without this, the paint on the rubber lies quite well. The process of coloring does not differ from such work on another object.
Having understood with the question of how to make a tire from the car wheel and how to cut everything correctly and set up, it's time to understand what is better to put in a flowerbed from tires. A clear instruction on which flower is better to put in flower beds made of tires made by your own hands, of course, does not exist.
Tire with flowers
No less bright looks nasturtium. But, by departing this flower on flower beds from the tires, it should be remembered that the culture is very bad to transplant. Accordingly, at a permanent place of growth, the nasturtium is worth placing in the form of swollen seeds or finished seedlings in peat cups.
In addition, you can plant velvets, verbena, viola and other not too whimsical flowers.
It is allowed to plant in homemade caspo and perennials. It may be chrysanthemums, carnations, daisies, decorative onions and much more.
The main condition - flowers planted in tires should be unpretentious and demanding minimal care.
No matter how interesting is the idea, and no matter how the color of the colors has been planted into an improvised flower garden, the design itself should be placed in such a way that access to it remains free. This will ensure proper care plants. Only in this case, the use of tires as a leaf will be justified.
As for the care of flowers, it largely depends on what is specifically planted, and does not differ from manipulations produced with a similar plant lined in open sad or flower pot.
Completing the conversation about how to make a flower from the wheel, it is worth noting what a constructive solution is as part of the creation landscape design has a number of undoubted advantages:
Rubber - the material is very fatty, and the question should not stand about how to make a club from the tire (especially since it is very easy), and what variant the flower garden is better made.
Very often, the gardeners accumulate things in the country area, which threaten sorry, and what to do with them so that they will serve the second life - it is not clear. However, it is worth a little blowing, and the garden plot will decorate beautiful flower beds from the tires and another girlfriend. And to help in the design of the flower, old tires, which have already served their term.
About how from old car rubber tires Make beautiful flower beds than painting them, and will be told below.
Old car tires after long-term use will be soft, and it is easier for them to give the desired shape. Tires can be asked for neighbors - motorists that they do not need. You can also pick up the spent car tires at the maintenance stations, since there they are differently thrown into a landfill. And if you can choose between domestic and imported tires, it is better to make flowerbeds from import tires. Because tires of foreign producers are much softerSo it is easier for them to give various forms, turn out, etc.
Dirty tires should be clearly cleansed from dirt and sand. After all, with clean material and work more pleasant, and the blades of knives are blocked faster when working with tires, soiled dirt and sand.
Before making a vanza or a floral from an old tire, thoroughly thinking it appearance: In the form of a bowl, which will have smooth edges, flowerbed, in which the edges will be cut by waves, or a flower-shaped vase with petals and fringe.
The shape of the tires can be inventing any, but it usually always happens the forms of the "pan - cover": the bottom of such a flower beds will be deep, and the top is necessarily cut off. Cutting circuits can be easily applied in conventional shallow.
If because old tire The owners decided to make a flower in the form of a flower, then on the edge of the product it follows in chalk to draw the contours of the petals, and then cut down the contour with a sharp knife. Each of the petals should not be more than 12 cm. If the petals do more, then the bus will not be turned off, and the shape of the flower beds will be uneven.
When the tire along the contour is cut, then the tires must be cutting along the recesses and in the longitudinal direction (the distance between such processes is up to 10 cm).
In order to create a rone from the tire on the leg, the tire inside out is pre-turned. Many gardeners do not work like the first time. In fact, turn the bus in this way is not easy.
Metalocord is usually cut with a grinder in several places. This saw rubber is cut smoothly. Cuts are made throughout the surface of the tire at an equal distance from each other (about 15 cm). And only then you can proceed to turning the tire. It should be remembered that it is difficult to turn out only the first piece of the tire, then the product will turn out much easier.
Any tool used for cutting automotive tires should be well sharpened. Old tires can be cut with a shoe knife. To facilitate the cutting process, the blade of such a knife is lubricated with liquid soap.
Wonderful if there is an opportunity to cut the coatings to use a jigsaw saw. With this tool, you can drink different shapes and crafts from the wheels.
For sawing metal disks, it is necessary to apply a saw - a grinder.
Cut tires can be different, depending on the form future flowerbed. You can cut the tires in half, or cut only the upper part.
However, not enough enough old tire Unusual shape. After all, black or dirty - gray vases look ugly on a general background garden plot. Therefore, it is necessary to paint the outer part of the vases that were made of wheel skates.
To paint these products from rubber, use any kinds of paints:
If the outer part of the tires is clean, the paint will fall on it smoothly, and it will last on the tires not one season. You can use for registration of vases of automotive paint.
The craftsmen use aerosol cartridges with paint. In this case, it is possible to paint all the prepared flower beds from automotive tires in a short period of time. It is better when painting tires to use light shades of paints - in this case, the ground inside the tires is heated less.
Most often, gardeners are painted only the outer part of the tires. However, it is much more aesthetically painted with a tire and from the inside (at least its upper part).
Options for registration of flower clubs from automotive tires can be a great set - it all depends on the fantasy of the owners and the presence of various colors of paint.
You can combine different colors, as well as shades. Moreover, you can the bottom of the flower beds in the dark paint, and the top is lighter. You can apply to the main color ornament of another shade. However, do not stand too try, coloring the tires - when the flowers grow up, they can completely close the outdoor part of the flower beds.
Some craftsmen do not stop only in staining such a flower - they can stick glass pebbles on tire petals, creating a dew effect.
The correct combination of colors when staining the flower beds from automotive tires, which "consistently" the colors of plants planted in such flower beds will give the garden sector unique color.
Making out flower beds by car tires, you should not restrain your fantasy. After all, from old tires can be built not only flowerbeds ,. Tires can be used in the manufacture garden swing, chairs and deputies, various jewelry for garden plot, fence and many other.
If the garden plot is small, then it is more appropriate to lay the flowerbeds from automotive tires, carved in the form of a frog, a wonderful swan, a fairy tale carriage, a bright firebird or an exotic parrot. But on the large size of the lawn it will be better to look at the flower beds, made in several tiers, or designs made vertically.
It is originally watching slides from spent tires. The height of such a slide depends only on the imagination of the owners of the plots. Beautifully look at small slides from several tires, Installed in a chess order on each other. Moreover, in each of these tires, you can land different colors.
The size of such slides both in width and length, and in height depends only on the fantasy of the flower and size of the area allocated to such flower beds.
Cancel tires in such a flower garden can be both equally and combining shades.
Plant in flower beds from automotive tires better flowerswho will delight their bloom all season. Flowers landed in a flower garden from the tires are usually distinguished by unpretentious.
Moreover, it is possible to plant the blooming plants different in height and colors. You can use curly flowers.
These may be such plants:
Free space blooming plants can be supplemented with spruce bumps - such decoration looks interesting, however next year Such cones have to be replaced with fresh.
Combining various types and varieties of colors, you can create extraordinary on the beauty of the composition in flower beds from old car tires. It all depends only on what colors want to see in its portion flower water.
Old automotive tires can be perfectly used to improve the overall interior of the garden plot. Most often they are used precisely for the design of flower beds or flower beds. And then it all depends only from the fantasy of the owners - and the options for the flower beds from old tires a great set.
Automotive tires have been used for a long time in such a business as the design of the flower. However, the simplest flower bed, made of the untreated automotive tire, looks quite boring and uninteresting. In addition, the most ordinary tires do not give a sufficient amount of free space, so the flowers are quite uncomfortable in them, because the side is very thick, and the hole itself is extremely small.
If you spend some time and apply a fantasy, then the original flower leaf can be made of the tire.
If you attach at least a droplet of effort and spend some free time, you can make a pretty good vase from the old tire.
To make vases or a flower garden from automotive tires, you need to take such materials as:
For a vase, it is better to use tires from modern passenger cars, as they are easier to turn out than tires from old cars.
To make special vases, you need to take any tire from a passenger car, best if they are modern, because the old is much more difficult to turn out. In addition, as a result, such vases made by their own hands look pretty rude and untidy.
It is also the best tire with a direct protector, and not with a semicircular, and it is desirable that they were winter, because they are much easier to turn them. There is a special instruction, with which a flower garden can be made, and also adhering to which, you can create truly original and unique garden pyro.
It is best to plan triangular or semicircular petals, they will be ideally able to approach any garden.
Before proceeding to cutting patterns from the automotive tire with their own hands, you need to pre-mark. It is easiest to cut a bus in the form of petals, so you first need to draw them. They can have the most different shape and magnitude. It all depends on the imagination of who makes flower. You can make triangular or semicircular petals, because they look more attractive and can be perfect for any garden.
To make triangular petals, you need to attach an angle of completely any suitable plate and thoroughly outline the contour with chalk or seer. Then move it in such a way that the edge can come into contact a little with the already marked petal, outset another petal and so in a circle, to the end of the entire tire. If the last triangle does not fit down a bit, then you should correct all the other triangles that are located in the middle. At the ready-made Vazon made with your own hands, the difference in size will not be very noticeable, so the petals can be safely adjusted towards increasing or decreasing.
Following the instructions, you can make quite interesting and unusual gardery vases, which will undoubtedly like everyone.
If you need to make semicircular petals, then it is initially necessary to draw a suitable outline on a dense cardboard and only then turn it out.
To make a fence with your own hands for flower beds or colors for flowers from the old tire, after marking, you can start cutting it. First, it is necessary to cut through a small hole, insert a narrow and sharp knife into it and cut the rubber to them exactly on the markup. The knife at the same time must be constantly caring into the water: it will greatly alleviate the cutting of the tires. It is best to take an ordinary shoe knife, but it can come up with a simple kitchen.
When everything is cut, it is necessary to pull out the cut part and start turning the tire inside out. This is a rather time-consuming stage of all the work on the manufacture of flower beds for the garden. To make this process a little easier, it is best to make big cuts right to the tread itself.
A kitchen knife is suitable for cutting tires.
If there is not enough strength, cut the opposite petals part of the future flower beds, so as to remove steel cord. However, there is a possibility that the flower garden without it will be much worse to hold its shape. And, moreover, almost every man will be able to quickly turn the tire and without cutting Cord, it is only necessary to attach a little effort and time.
When turning the tire with your own hands, you must first twist one side, then flatly flatten the tire into a small and narrow oval and then it is very easy to twist it completely.
Naughty own hands You can simply make an excellent garden for the garden or a fence. In addition, their manufacture and subsequent design will not take much time and will not require a large amount of forces.
When a garden flower garden is completely ready, it must be carefully flushed and dried. In addition, the fence or vase from the tire will certainly need to be deguted with special Tools And only after that paint.
To decorate the vase or a fence made of tires for the garden, it is best to use white paint and several dyes of the main colors. Use light shades to use. Thus, when mixing, you will get too dark tone.
The resulting flower garden will look at the site is simply amazing and much better than ordinary automotive wheels.
When the flowerbed is ready, it is necessary to pour in it the land and plant flowers.
Automotive tires have long and firmly occupied their place among the materials garden design. No wonder. For reliability of vehicles, the highest quality rubber is used, which is not afraid of aggressive environmental impacts, it is plastic and durable. Folk craftsmen have learned to build whole sports towns, artificial reservoirs, cut various figures from this simple material. Use the car tire and to create a flower. This article will talk about how to twist such a versatile material like a tire for a flower garden to create original flowerbeds on the leg. Recommendations will be supplemented with visual video at the end of the text.
To perform a vase on the leg, a whole wheel with a disk will be required. Not everyone at the site has a large range of served wheels, however, and not all of them are easy to use for this purpose.
You, of course, saw the perfect lawn in the cinema, on the Alley, and perhaps on the neighboring lawn. Those who at least once tried to grow a green platform in their own area, without doubt they will say that this is a huge work. Lawn requires careful landing, care, fertilizer, watering. However, only inexperienced gardeners think so, professionals have long known about the innovative agent - liquid lawn Aquagrazz.
For the first trial option, it is worth choosing a wheel with the following nuances:
If there were no available wheels among the existing stocks, you can go to the nearest tireage, where with great pleasure will give a gift somewhat anyone to the choice. Before starting the work, the wheel must be cleaned of dirt and dust. Such a procedure is necessary not as much of aesthetic considerations as in order for the sand tools, the tools do not felt.
We take the desired tire and make marking on it
Work on the manufacture of flower beds on the leg includes several stages:
So that the vase is neat and even, it is necessary to apply the lines of future cuts. To do this, it is necessary to put the tire horizontally and draw zigzag lines from the disk to the periphery. Externally, the drawing must resemble the flower petals. Petals can be made with sharp or rounded, thin or thickened - in general, to their taste. It is only necessary to take into account that the openwork edge will be important not only for a future bowl, but also a leg.
You can put the line with a marker or even chalk. When working chalk there is a significant disadvantage: it is easily erased, and it may happen that in the process of work, the markup will disappear, and in the inaccuracy of the exhibit, therefore, it is safe to carry out the contour with a marker.
On the video below demonstrated how to make a flowerbed of a tire:
Many quality tires, for the reliability of the use of direct purpose, are reinforced with metal reinforcement - metal coordination. This metal wire makes it difficult to turn out. But there is a small trick: you can apply cuts with a grinder from the outside of the tire to cut the metalocord, but at the same time maintain the integrity of the future vase. Cuts should be performed every ten centimeters.
Perform this procedure should be carefully so as not to cut through the rubber through. The fact that the metal cord is cut will indicate light metal dust on a tire, smoke and sparks in the area of \u200b\u200bthe cut when contact with the grinder. Seeing these signs, you should not deepen the incision on not to make a hole in the vase, the goal is so achieved.
In the picture, it is shown in detail how to cut, and then turn the tire
Operation on cutting the pattern of the vase is carried out with a knife. The knife should be very sharp, then the vase will turn out to be smooth and neat. The upper part of the wheel must be completely separated from the lower lines of the applied markup. It turns out a bowl with a lid. The cover is kept from the disk. It turned out an inverted hat down mushroom champignon. It is clearly visible on the video.
The main and most time-consuming process in work. It requires certain physical training and coarse male strength. A woman is unlikely to cope with such a task. It is more convenient to perform this part of the work together. It is necessary to flip the product with a cut side down (put a champignon on the leg). Pick up the edge of the tires with a solid object, for example, scrap or mount, and proceed to turning the tire inside out.
Raw material for flower beds
At this time, it is necessary to firmly press the wheels to the floor. As soon as you manage to recall a small area, the process will go faster. After half the tire is turned out, you need to press the bus from the sides, bringing it into oval, it will allow you to quickly turn into the second half without additional effort. The video at the end of the article will help to visually present the process. In the global sense of Klumba is ready.
A black rubber vase for flowers has a non-primary look and is unlikely to decorate the garden. In order for it to become beautiful flowerumboy, You need to paint it and decorate. Postpone from painting is not worth it, because immediately after making rubber brilliant and clean, which will make it decorative finish Smooth and durable.
Before painting, it is necessary to treat a vase with a degreaser. Select a universal degreaser or special for rubber. Different paints are suitable for applying colors: enamel, oil and nitrocracies. Suitable car paint. A more uniform and neat will be staining with a sprayer or a spray.
Our raw flower bed option can be decorated
Council of Professionals: Flowers, performed in bright colors, look more spectacular. But the choice of color and further decoration is completely dependent on the fantasy of the master and the wishes of the owner of the beds. You can use multicolor staining, as on video, as well as use glass, pieces of ceramics and other materials for decorating such a flower beds.
After the paint is driving, drainage and earth are stacked in the rase. All, you can plant flowers! Original on such flowers will also look vegetables, therefore, it will be a small improvised vegetable garden. This technique will allow to combine pleasant with useful, especially on little plot. Or, on the contrary, the flowers with flowers are easy to enter into a garden with beds, since the undoubted advantage of such jewelry is mobility.
On video is clearly demonstrated how to independently make a flower leaf of tires, including the turning and decor of the finished vase:
Many believe that it is only an experienced specialist to develop a beautiful landscape design. But practice shows that such a point of view has nothing to do with reality. Make a garden or a household plot. Everyone would be a corresponding desire.
So that the cottage or the house territory looks worthily, it often does not require high professionalism or substantial financial costs. Everybody can go to move: brick wreckage, stones, plastic bottles, old watering cans and more.
Cover flowerbed
For example, an alpine slide, which is the object of dreams of many country area owners, may well be constructed without attracting specialists. The most important thing is not to be afraid to experiment and feel free to combine different items and objects.
Interesting. Often old junk, which, it would seem, it's time to throw, can serve a good service in the design of the territory.
So, for example, a beautiful stand for a vase will be able to get a beautiful stand for a vase. Old chest, if it is cut and appropriately arrange, you can decorate any deaf wall, putting bright colors in his boxes.
From the girlfriend, it is possible to make more complex structures, for example, having a metal rod and flower pots at hand, you can build a very interesting vertical flower leaf.
Among domestic gardeners and owners of country sites are quite high demand flower beds from tires. They will be discussed.
To engage in the creation of flower beds with their own hands, it will not be necessary for special experience and knowledge. The most important thing is to have the necessary tools at hand and own basic information.
By type of design, flowerbeds from tires are:
Round flower beds from wheels - the easiest version. All that is required for the organization of a flower garden is to take tires, paint them into arbitrary colors, filling the soil and plant plants.
Interesting. To get an interesting composition of such a material as a car stall, you can paint the wheeled material in bright colors and, putting on top of each other, form high flower beds.
As for multi-level structures, they are created from the tires of various diameters. They are placed on each other according to the principle of the toy pyramid (in the sequence of size decrease) and fill with soil. Such a design is perfect for planting ampel plants.
Multi-level tire design
Suspension flower beds made of tires allowed to be fixed in different ways: to the pipe, chains or rope to the tree branch, etc. Only before you should not forget to overlap with some material of the bottom of the improvised kashpo.
Before entering the manufacture of flower beds from tires, you should decide on the dimensions and design.
Flowers of tires are very stylishly looking at her hands. To work, you will need a tire, a sharp knife capable of cutting thick rubber, and a marker (either chalk).
Flower flower beds Manufacturing work is performed as follows:
Flower-shaped flower
Then you need to paint the product in a beautiful color, fill the earth and plant flowers. The paint is best suited for oil. Other types of paints can suck.
Vase from the old wheel
Another interesting master class, which will help to lead, is devoted to the manufacture of a stylish garden vase from a worn wheel. To work, you need to prepare a tire that has a disk, knife and marker. Next, operate according to the following scheme:
Important! Before pouring the land into such a vase, you need to not forget to put on the bottom of the gasket, in which small holes should be provided for removing excess water after irrigation.
This is another simple and interesting option, like from the wheel quickly make a flower bed in the form of camomiles. For work, you will need a few tires and a sharp knife. In general, it will take no more than half an hour. Step-by-step work work looks like this:
Core chamomile shape out of flowers. Alternatively, it can be in the form of a circle is posted from such a material as a plastic bottle (to top) or stone.
Flowerbed Chamomile Tires
If you approach the process of creating flower clubs from tires creatively, the original ideas will not make you wait. Answers to questions: Is it worth further using plastic material, how and how to paint the wheels for the flower beds and that, as a result, put in a flower garden, will be found along.
To create an original porridge in the form of a parrot from the old wheel, the following materials will be required:
The work is performed in the following order:
To turn the tire inside out, it will be necessary to make an effort. To facilitate work, it is recommended to make big cuts - to the tread. First turn one side, then, slightly flattening the tire in the oval, make it completely.
If the forces are still lacking, it should be cut into a circle part of the flower beds opposite to the petals to remove the steel cord. True, in this case, there is a risk that the design will not be good enough.
Working with a tire
To cut the tire you will need a sharp knife. First, a small hole is made in the tire. Then the cutting tool is inserted into it and the material is cut on the markup in advance. The knife should be periodically sculpting into water or machine oil. This will significantly simplify the task.
When the design is ready, it remains to paint. For this, the surface is completely degreased (for example, acetone or white spirit) and give dry.
The surface can be further primed, but this condition is not mandatory, since without this, the paint on the rubber lies quite well. The process of coloring does not differ from such work on another object.
Having understood with the question of how to make a tire from the car wheel and how to cut everything correctly and set up, it's time to understand what is better to put in a flowerbed from tires. A clear instruction on which flower is better to put in flower beds made of tires made by your own hands, of course, does not exist.
Most often in such designs are planted various annuals. Cascade or ordinary petunias of various varieties are particularly well.
Tire with flowers
No less bright looks nasturtium. But, by departing this flower on flower beds from the tires, it should be remembered that the culture is very bad to transplant. Accordingly, at a permanent place of growth, the nasturtium is worth placing in the form of swollen seeds or finished seedlings in peat cups.
In addition, you can plant velvets, verbena, viola and other not too whimsical flowers.
It is allowed to plant in homemade caspo and perennials. It may be chrysanthemums, carnations, daisies, decorative onions and much more.
The main condition - flowers planted in tires should be unpretentious and demanding minimal care.
No matter how interesting is the idea, and no matter how the color of the colors has been planted into an improvised flower garden, the design itself should be placed in such a way that access to it remains free. This will ensure proper care plants. Only in this case, the use of tires as a leaf will be justified.
As for the care of flowers, it largely depends on what is specifically planted, and does not differ from manipulations produced with a similar plant lined with an open ground or flower pot.
Completing the conversation about how to make a flower wheel from the wheel, it is worth noting that such a constructive solution as part of the creation of landscape design has a number of undoubted advantages:
Rubber - the material is very fatty, and the question should not stand about how to make a club from the tire (especially since it is very easy), and what variant the flower garden is better made.