As soon as the street is coming on the street, it's so you want to reveal all the windows in the house so that the fresh air supplanted the stagnant stool. But the trouble: together with the fresh air in housing, annoyed insects are happy to fly to their bite and buzzing to spoil our mood.
The best way is not to let them on our territory - a mosquito net. On the rules for its installation on plastic window We will talk in this article.
This simple device will not only act as protection against annoying insects, thanks to which you will not have to spend money on fumigators and other not the most useful chemicals. Mosquito net will not miss outdoor dust into the house, poplar fluff and pollen of plants, which is very important for allergies. In addition, you can not worry about the safety of your pets - cats, dogs and birds when the window is open.
Note! There are quite a few cases when cats and dogs trying to jump into the open plastic window, stuck between the frames and died from asphyxia. Installing mosquito net.You can save your favorite not only health, but also life.
Structurally, such a grid consists of the following details:
Using a mosquito net, you will be convinced of its merits. The first is convenience. At the right time you easily remove this design, and if necessary, insert back without much trouble. Mosquito net does not require careful care, because it rubs off with a sponge and washed with water with soap.
Second - nonsense appearance Mesh, its aesthetics. The fine holes of the material make it translucent, so the view from the window is not blocked, there is enough sunlight and fresh air into the room. Rainwater from the street through such holes will not be leaving.
And the third - the design of the mosquito net consists of aluminum and fiberglass. This means that it is characterized by high strength, resistant to mechanical effects (breaks, stretching, bending tensions) and does not fade in the sun. Nevertheless, the grid is flexible and compact so much that you can turn it out and postpone into a closet for a while.
The most common types of fastening mosquito nets
Taking into account the features of installation and use, mosquito nets are divided into several types. Consider them in more detail.
Frame Mosquito Mesh - The easiest and most affordable option.
So that such a grid is well glued to the window, you need to pre-clean the surface from dust and load
Rolled mosquito net, or rollt
Mosquito nets-plize can be decorated with your window
Mosquito net "Antikushka" will withstand your domestic pet
This design on the PVC windows is usually fixed with one of the four typical fasteners.
Milking for mosquito nets: plungers, "checkboxes", corners and z-fasteners
To independently carry out the mosquito net, prepare the tools:
Fastening elements are supplied in a set of design. But you need to specify this when ordering and check before purchasing products.
This method of fastening the grid on PVC-glass accumulation is considered the easiest and safest. With aluminum ripples, hooks are enhanced by long planks.
Install the grid and secure it on the brackets.
This method is reliable, besides, you do not damn the rubber seals. But do not forget to follow the security rules, because you have to get out of the outside window to fasten the corners.
If the mounting to ordinary brackets is not possible, this method applies. As a rule, the protective grid can interfere. Or there is enough space on the frame to place the brackets. Since the plunger grid should be placed inside the opening of your window, and not a muster, measurements are carried out in strict accordance with the perimeter of the frame.
Most effective method protection against insects and dust from the street. The fastening of the system is carried out above the window.
Installing a roll grid begins with a box mounting on the upper window frame
So far, not all apartments and houses are equipped with glazed windows from PVC. How to protect yourself from the invasion of insects, if you have windows with wooden frames? We offer you several options.
Now it is impossible to imagine metal-plastic windows without mosquito nets. IN summer period Without protection, it is not necessary, because insects (mosquitoes, midges and flies) are storing to penetrate the dwelling. In addition, the mosquito net serves as protection against dust, garbage and fluff. You can order a mosquito net complete with windows and immediately install it after mounting window blocks or purchase separately.
A classic version of the mosquito net is made of an aluminum profile, which is stretched by a mesh cloth. Standard mosquito nets on the windows are made of a fine grid of a gray shade to protect our dwellings from the penetration of annoying mosquitoes and flies. In the past century, when no one knew about metal-plastic windows, there were no mosquito nets. In those days, people clung to gauze or mesh cloth. If the street was very hot on the street, to sleep at night calmly and not worry that all family members could bite mosquitoes, the windows were discovered, and the free opening was wrapped in a subtle cordan cannol. Naturally, such protection did not work and the insects still flew into the premises.
Now about the buzz of mosquitoes and sleepless night You can forget and order special plastic mosquito nets.
The main task of grids is to ensure reliable protection of housing from the penetration of flies, mosquitoes and midges. In addition, the grid delays dust, garbage and small particles that can cause allergies. If you set mosquito nets on the windows and doors, you can not worry about your safety and security of pets. Suppose you live on the 5th floor or higher, you want to open a windows window to air the rooms, but afford such a luxury you are unable because your favorite cat can fall out of the window. If there is a mosquito net, this can be avoided.
In addition to the listed advantages of protective nets, there is another important plus - simplicity in care. Twice a year, the grid is cleaned from dust and contaminants with a soft sponge with soap solution. After half an hour, the grid put on the previous place.
The cost, the method of fastening and the configuration of mosquito nets may differ. Consider the main types of protection:
Consider popular types of mosquito nets used to install on windows and doors.
If you have animals at home (dog or cat), then the safety of pets also need to take care. You can order a protective grid with a funny name "Antikushka". It is made of durable material, Therefore, the grid is able to withstand a larger load. If the animal tries to break the grid with curls - nothing will work. Mosquito net will remain as strong. To spoil protection or break her pet will not be able. For safety, this mesh model has a durable mount, so it can not be removed for the winter.
Sliding mosquito net is suitable for installation on balconies and terraces. Consists of 2 sliding halves that open and closed at pressure. For grids function correctly, you must install the guides, they serve to adjust and move halves. The color of the mesh canvas is standard, gray. By the way, mosquito nets of any kind are made of a gray shade cloth. This color does not impair visibility and does not affect vision.
Mosquito net on magnets - a convenient solution. This model it is considered universal because you can order a grid of any size to install in the country, take with you to rest or provide protection in the home where windows are not installed standard sizes. Among the advantages of this type of grid, it is worth noting the simplicity of installation - it is necessary to remove the protective tape and attach the grid to metal-plastic window. Due to the magnetic ribbon, it will be firmly held on the frame. There is a second option to protect the windows, but instead of a tape with a magnet, the grid is equipped with a sticky tape (by type of bilateral tape).
Among the disadvantages of the mosquito net in rolls should be noted in shortness. In addition, this design is unable to be called.
The classic option is a grid stretched into a durable plastic frame. It can be made of standard mesh canvases with small cells, with protection from pets of domestic animals and with a special coating - dust protection. Mosquito net is installed on both the doors and windows.
The variant of the mesh with dust protection is made of a canvas with very small cells that are able to delay large dust particles. This is the main advantage of mosquito net, disadvantage - complex care. Since the product delays dust, then it is necessary to clean the canvas often. To do this, it is necessary to remove the design, rinse with a stream of warm water, then apply a soap solution, wait 5-7 minutes and rinse with warm water again. After water procedures, the grid must be carefully wired with a soft cloth (not wet) to check how effectively the cells from dust were cleaned. Despite the fast pollutability, the grid misses the light. The cost of such protection will be 2 times higher than the price of a conventional mosquito net.
Depending on the selected mesh type, the mount may be different:
Popular and frequently used fasteners for the installation of mosquito nets are fasteners in the form of the letter "Z". Installation using such fixtures will be easier and more reliable. It is important that you do not need to make holes in the metal plastic frame. In addition, the grid can be installed not only on plastic windows, but also on wooden Rama. Of the disadvantages, it is worth noting only one, such a mosquito net holder does not provide dense adjacent to the frame, so small insects can still squeeze through a small hole.
Reliable mounting option - the use of pins. They screw in the window frame, so the mesh fit tightly and insects cannot penetrate the dwellings. Easy installation and fastening reliability - it is worth paying attention to it. It is also important that the grid can be easily dismantled for the winter or to wash away from pollution.
Fastening on the loop is best to choose when you need to install the grid on the door. Then it is desirable to order a durable profile with an additional jumper so that the design over the years has not saved under the weight of its own weight.
By ordering mosquito nets on the windows, you get your order with the desired set of fasteners. When removing measurements it is necessary to specify the fastening issue so that the manufacturer makes mosquito nets and provided a complete set of fasteners. If you are engaged in these questions yourself, then you need to familiarize yourself with some nuances in order to correctly remove measurements.
What you need to know:
If you want to work with a zigzag mount ("z"), to the resulting digit of measurements in width and height (A and B) you need to add 5 cm. So we get a clean size of height and width. Fastenings are needed by 2: bottom and upper, plus another 8 screws (size 3.2 x 16).
If you want to install mosquito nets on the windows to the brackets, then to the resulting digit "A" (width), you need to add 5 cm to the measurements at a height of +18 mm.
When mounting meshes on the pins add to 2 mm measurements on each side.
ATTENTION if in window noise There are protrusions that may interfere with the mesh mount, it is necessary to notify the manager when ordering. It is also desirable to take a picture of the window and tell you to those skilled in the art that you have made measurements to avoid annoying misunderstandings upon receipt of the order and independent installation.
After you have chosen the method of fastening the grid, you must prepare the tools. Electric drill can be useful if you need to drill holes for loops.
Features of mosquito nets:
Many people who solve them independently perform the installation of grids, are asked: "How to wear a mosquito net" on the window. This work is simple, the main thing is to be careful, so that it is not to drop the grid to the ground.
It is necessary to turn to the "from yourself" the mounting element ("ears" or holders) to put the grid. Now take the grid for the holders and carefully display the window to the outside the grid, now get it back, insert into the bottom and fix it on top. Hold the grid for the holder with one hand, try to rotate the fasteners to fix the frame. That's all, you successfully coped with the work, now you can enjoy the fresh air, without fear that insects will disturb you.
We reviewed outdoor way Fastening mosquito nets on the windows. There is another method that can be used for installation of protective structures is an internal mount.
Installation of the grid is performed somewhat differently:
At first glance, the installation may seem like a difficult task, but if you are in the subtleties of the mosquito net in the subtleties, then you will enjoy from the work done. Just remember that independently of the selected fastener method, the grid is not calculated on a strong mechanical pressure, so it is not necessary to let it close to the open windows of your pets and children.
It's best to shoot mosquito from windows to protect them from harsh weather conditions. If there is no possibility to remove the grids so that they do not damage in the room, then they can be left on the windows. Nothing terrible with grids will not happen, only the life of the products will be reduced.
To remove the grids, you need to do the opposite: first unscrew the ears or brackets (do not forget to hold the product with one hand for the holder). Next, take out the outflow of the grid, deploy and add to the room. Perform this work extremely careful not to miss the grid to the ground.
You can care for grids and need. At the end of the summer season, when it was cool on the street, protection can be removed and washed. You can simply wipe the product with a wet sponge to remove dust, fluff and dry insects, but best, to attribute the grids in the bathroom and wash well with warm water with detergent. It is not necessary to rub the web much, it is not necessary to walk with a damp sponge over the surface to remove the contamination, then apply a soap solution, wait a few minutes and washed off with water. Such manipulation must be made at least 2 times a year.
Installation of mosquito net. Video:
As soon as summer comes, the owners of all apartments open windows to access fresh air. However, a pleasant coolness is darling various insects that do not quietly sleep and bite throughout the night. To protect yourself from such trouble, it is worthwhile to find how to install a mosquito net.
The standard mosquito net is made in the form of an aluminum profile with a fine-heeled material stretched on it. The canvas has a gray color that is not striking, while the profile color is similar to the color of the window.
Mosquito cloth performs several functions:
Mosquito nets have one substantial plus - an easy care process. It is enough a couple of times a year to wash the canvas with a soft detergent. It is also simple enough, so it will not take a long time for care.
The process of manufacturing and installing the grid also does not require excessive effort, or possess special skills and tools. Independent installation and making mosquito net will require much smaller financial coststhan an order in the company setting the PVC window.
Installation of the grid can be performed on the door or window opening with any sizes. This work does not take much time and depends on the complexity of the installation. For mounting, standard frame mesh will require no more than 2 hours.
If the old mesh malfunction is enough to order the same by removing its exact dimensions. Moreover, the fastening system on the windows themselves already exist. In this case, much attention should be paid to the selection of the company that you give the order. You can contact the firm that has completed the installation of windows, however much cheaper you will be purchased on wholesale fold, which specializes in selling components for manufacturing companies.
If the installation of your window fell on winter time, there is a chance that the mosquito net is simply not included in the order when you will decorate it. In this case, measurements must be performed otherwise:
When the order is ready, you need to give both the grid itself and the fasteners for it. Fasteners include two pairs (upper and lower).
When installing, do not confuse fasteners: the top plank is significantly wider below.
To install mosquito nets, you can use two fasteners. Consider them below.
Mounting is made as follows: Take the product for the side handles, boot the hooks from above behind the window and lift the mesh up to the end. After that, the hooks from the bottom are booked for the influx of the frame and lower the product to the lower fasteners. Next, align the mosquito cloth in the window opening.
This method is more reliable and practical, but more dangerous, because to fix the corners on the screws, it is necessary to border the window. If you have no wound experience in installing this way and you live on a high floor, entail this work to specialists.
Installation is performed in the following order:
This is completed on this installation process, and you can enjoy the fresh air, not afraid of different insects.
This video shows the process of mounting the mosquito net.
With the advent of plastic windows, their manufacturers began to let the additions to them and mosquito nets appeared. Their destination is to delay the penetration of insects and dust in the apartment, when the windows are open. Make a mosquito net with your own hands is very simple. Below is an example of an installation on a plastic window.
Before dealing with the installation rules, you must select the grid of a specific design. It happens the following types:
Install the mosquito net with your own hands on the plastic window is very simple. It all starts with the assembly of construction. The grid profile itself must accurately approach the window size. For the reliability of the attachment, the plastic frame is additionally up and down and the aluminum profile is fixed. After you mounted a profile, it can be attached to the corners, which are also made from PVC. You need to pull the fixing cord around the perimeter of the entire frame and secure the grid on it. For convenient installation, almost on each form of mosquito net there are knobs that are allowed to fix or remove the design.
Installation of mosquito net on plastic window construction It will avoid various problems with insects, which in large numbers appear in the summer.
Only high-quality and correctly installed grids will ensure the necessary comfort and safety.
To the question of how to install a mosquito net on a plastic window with your own hands, you can answer that the procedure for assembling such a design and attachment of the accessory is quite simple, and even the person who has no experience in doing such work can cope with it. In this article, readers will be able to find the necessary advice on how to mount the mosquito net correctly and what nuances should necessarily keep in mind.
Before starting the installation of the product, it is important to get a complete picture of the mosquito mesh design. As the main elements, the following can be distinguished:
In addition, it will additionally need special accessories for fastening mosquito nets and the necessary tools.
Using such a product, you can forever forget about harmful and annoying insects, as well as, on the use of fumigators and repellents that are not entirely useful for the human body.
To the mosquito net really effective tool Insect protection, it is important that the product is installed correctly, without any deformations.
As the main advantages of the mosquito net, some parameters of such a design can be distinguished:
Disassemble how to put a mosquito net on plastic windows will help the type of product design. Only in the presence of an idea of \u200b\u200bwhich kind of grid has been purchased, it will be possible to properly assemble and install the design.
The main types of design are as follows:
Installation of a mosquito net on the doors and windows of plastic is not particularly difficult, however, when performing this work, you will need to consider several important moments. For fastening the structure, you can use one of the four existing options for fasteners:
Installing a design can be done with your own hands. To properly perform all necessary work It is worth using the attached instructions and the first thing that will be needed is to make a protective product.
Even before the assembly and purchase of the grid, it will take measurements of the window opening, so that the acquired product corresponds to these parameters, and it could be fixed.
Most often, the size must correspond to the overall dimensions of the window opening. This can be checked by opening the sash and measuring the opening.
First, we prepare the framework for which, cut off the frame profile strictly in the size of the window opening. Additionally, the crossbar can be installed to impart stiffness. It is extremely important here to take into account the ratio of the height of the opening to its width. The lower and upper parts are amplified by a special profile - an adhesive, made of aluminum. This increases the strength of the product and guarantees the long-term preservation of their qualities. After the profile is ready, you can apply corners to assemble the frame. As a rule, the corners are performed from durable PVC, which protects the design from the deformation and makes it more stable.
At the next stage, the mesh is tensioned on a special fixing cord, which from the inside is fixed in the opening of the frame. As a result, the cloth is reliably stretched and it can be fixed finally. After that, special metal elements are installed on the frame in the form corner profilewhich is necessary for fixing the cloth in the window opening. At the final stage, two special handles are joined to mosquito protection, which will allow secure the grid in the window.
For the installation process of the grid with a plastic fastening, it is necessary that the design is already assembled. It is important here to take into account that the width of the finished protection should be wider than the window for 2 cm, and above - by 3 cm. Included with the stack itself, it is necessary to go special set Fasteners - two upper and two lower. Fasteners are fixed on the frame and fastened. It is important to comply with the installation sequence, because you first need to fix the lower parts, and then determine the placement of fasteners at the top. In this case, the grid is inserted into special grooves, and then simply attracts to the frame without using additional means of fixing the canvas.
In the course of the simplest procedures, the Contractor can get qualitatively established reliable protection against harmful insects and even from the smallest particles of dust and garbage. Due to this, the air indoor will become cleaner and safer to the health of people living in the apartment.
