Empty corners of rooms and corridors are a waste of space. Where all the corners are empty, there is a feeling of some kind of incompleteness - as if something is missing in the interior. Let's not let the corners go to waste and think about how to use them for a practical or decorative purpose. How to fill the voids in the corridors? What to put in the corner of the room? We bring to your attention ten options for solving this problem.
Let's start with the impractical but very attractive elements to fill the void of the corners and create a cozy atmosphere.
The more spacious the room, the larger the vase should be. If one vase looks lonely in the corner, you can choose a pair for it or create a trio.
Height floor vase- from 40 cm. If the vase is lower, it looks ridiculous on the floor. An exception may be a very plump vase, better with filling.
Corners are the traditional location for floor lamps in living rooms, children's rooms, and bedrooms. Floor lamps are placed singly or in duo. A pair is usually placed symmetrically - on both edges of one wall.
The use allows you to solve several tasks at once: 1. fill in empty corners; 2. to bring symmetry, harmonizing the interior; 3. to diversify the lighting scenario in the room; 4. add; 5. to emphasize the style of the interior by choosing lamps in the appropriate design.
Mirrors in the corners allow you to perceptibly change the geometry of the room. Mirrored corners expand and lengthen the room.
How to decorate the corners with mirrors? You can use two narrow mirrored sheets, mounting them end-to-end on adjacent walls. Mirrored corners will allow you to take a fresh look at the possibilities of the room.
The given way of using mirrors to decorate corners is not the only one. You can go the other way and put a floor mirror or a mirror screen in the corner. Make sure the structure is securely installed. If necessary, it is worth fixing it. This way of decorating corners is most suitable for bedrooms and hallways.
Ceiling lamps or floor lamps can be placed in mirrored corners - the amount of light in the room will increase many times over.
Walls in an empty corner are a great place for a small gallery containing a selection of photographs, paintings, or posters. Don't be too proactive - keep the corners light and not overwhelmed.
Another casual way is to simply place a large framed painting to the corner.
Filling empty corners can be done not only from below, but also from above... Corner suspensions are an effective but rarely used (and therefore not jaded) trick.
Place a low hanging in the corner ceiling lamp with a spectacular design - and your room will either be miraculously transformed. Lamps can be single, decorating only an accent corner, or paired, suspended from parallel walls.
Suspensions are not only luminaires. Mobiles (solution for a nursery), all sorts of balls, elements like wind chimes, potted plants (including inverted ones), etc. can hang from the ceiling in the corners.
Now it's time to consider those solutions that will allow you not only to decorate empty corners, but also to use them for a practical purpose.
An empty corner can be retracted under the fireplace portal: Pacifiers, electric or bio. "Deception" without a heating element can be used as a mini-rack or stand for equipment. Well, an electric or biofireplace will not only delight the eye, but also warm the room.
The inner wall of the "firebox" can be made mirrored - this will create interesting visual effects that correct the geometry of the room.
Small tables and compact consoles fit perfectly into the corners. Particularly successful are corner pieces of furniture designed to fit perfectly into the corner and thus not take up a lot of space. Neat round tables and elegant corner chests of drawers are also convenient here.
You can put on a table, console or chest of drawers desk lamp, a vase of flowers, a photo in a frame, a box or something else. This is a luxurious corner decor that increases the level of comfort: the owners put, for example, an unfinished book, glasses, keys, mobile phones on the table. Additional shelves and drawers, if any, allow you to store other items as well. Thus, it is possible to "kill two birds with one stone": to fill the corner and create a storage place.
Another way to turn a corner into a storage or display area is to create a corner shelving unit. These can be single corner shelves or a rack-like rack.
In our time, empty corners are an irrational use of free space. Therefore, in order not to give the abyss of free meters, it is necessary to correctly organize the decor of the corners.
In the process of decorating corners, it is very important to maintain balance in order to use the space not only in terms of practicality, but also to make it a beautiful element of the interior.
One of the options to make the corner of the room beautiful without extra effort Is to put a floor vase.
However, in this case, you need to learn certain nuances, so than larger area corner, the more a voluminous vase will be required, if this is not enough, then you can add a couple of smaller vases to it. You should not decorate the corner with a low vase, except for wide round vases.
If a vase is of an interesting shape, bright colors or effectively painted, then it is not necessary to fill it with something, it is beautiful in itself.
But it is better to fill an inexpressive vase with stylish contents, for example, bamboo, reeds, spruce branches, original twigs, herbarium or artificial flowers, as in the photo of the decor of the corners.
A vase can be successfully replaced by a wicker basket or voluminous glassware decorated with pebbles or shells. This is unusual design solution will make the corner the highlight of the room.
A beautiful planter with a large and bright flower... And the more free space, the larger the plant should be.
So, for example, if the decor of a corner in a room may look like this, there is a beautiful glass or forged counter in the corner, on which beautiful pots with plants are located, a palm tree will take the central place among them.
It is important to take into account that the rack model must match the style of the interior of the room. This design will especially effectively emphasize country style and eco style.
Traditionally, floor lamps are placed in the corner, but you can make the classics more interesting if you put 2 symmetrical lighting fixtures.
This option is not only outwardly attractive, but also functional, as it additionally illuminates the room, emphasizing style and highlighting accents.
The most interesting decor of the corner of the wall is the use of a mirror, with which you can change the perception of space, expand the room or lengthen it.
Using mirror surfaces as a decor, it is not necessary to hang the entire mirror, two narrow mirror strips are enough, which are mounted at the junction of both walls.
You can also put a floor mirror in the corner or install a screen with mirrors. In this case, care must be taken to ensure that the mirror structure is well fixed.
The mirrored corner can be supplemented with a beautiful floor lamp or spotlights.
Family photos in beautiful frames can be included in the decor of the corners in the apartment. Great option decorate the corner with a three-dimensional picture.
Quite rarely, such a design technique as ceiling pendants is used in decorating a corner. However, this is one of the most effective ways decorate the corner space.
Create original design in the interior of the hallway, a lighting fixture with a lampshade of an unusual shape allows it to hang low from the ceiling.
You can also use curly flowers as a hanging decoration.
Decorating corners with decor, includes not only beautiful objects, but also the functional use of free space, ideal option in this case, the console may become.
The most successful solution can be called the corner console model, with its help you can fill the corner with the necessary things, moreover, such an angle will look great.
The corner of the room will look luxurious if you put an elegant, small table in it, and on it a vase with flowers or a framed photograph.
Moreover, such a design solution will not only make the corner beautiful, but also functional, because you can leave your gadget or an unfinished book on the table.
And if a table with drawers, then this is just a godsend, because all sorts of little things can be stored in the drawers, like a bunch of keys.
Turn an ordinary corner into a pleasant place to relax by placing an armchair in it. However, this will require a high chair or hang a mirror on the wall above the back, so as not to disturb the proportions.
What types of decorative corners are there, methods of application, installation rules and examples of use in the interior.
One of the most problematic areas in interior decoration is the outer corners.
It is quite difficult to paste over them with high quality, often the wallpaper is pulled up at the corners, the corner is easy to damage, hitting when rearranging furniture or carrying any solid large object.
Decorative corners help in solving these problems.
The corner protects the surface from mechanical damage, allows you to hide some flaws in the finish, arrange the transition from one material to another, close the ends of tiles or panels.
There are many options for using corners in the interior. They can be used to decorate both outer and inner wall corners. Some difficulties arise when finishing corners other than 90 °; this requires special, so-called. folding corners. For finishing the curved surface of the corner, flexible, "arched", corner profiles are used.
The most common ways to use decorative corners:
Corner profiles are made of various synthetic materials, MDF, wood, metal. It depends on the material of the corner. appearance, specifications and scope.
Manufactured from aluminum, stainless steel, brass. Steel and brass products are polished and uncoated, while aluminum products are subdivided into polished, anodized and with decorative coating, usually wood-like, but can also be painted in different colors. They are mainly used in the manufacture of furniture, less often in the decoration of premises. To protect the ends of the furniture boards, they are covered with a multi-shelf corner, one of the shelves of which completely covers the end, the second slightly enters the plane. Unpainted profiles are suitable for framing mirrors and glass-covered paintings or posters.
Metal corners can be mounted on walls as a base for easy false ceiling type "Armstrong" or PVC panels. The aluminum product is attached to the steps as anti-slip pads and edge protection against chipping.
They are made from various types of wood, including valuable ones. Wooden corners are used to complete interior decoration made of wood, for example, wall cladding with a block house or clapboard.
With their help, the ends of the boards are closed, both on the outer and inner corners. Also, these products are suitable for decorating painted or papered walls. In this case, they need to be painted or varnished. Wooden corners can only be used at strictly right angles, because they are fragile and can crack at the slightest effort to bend or straighten them.
If necessary, protect the corner and preserve the wallpaper pattern, stick a silicone corner profile. This material is quite soft and is well suited for rooms where small children are often present. Reduces the child's risk of injury from hitting a corner. The relative disadvantage of these products is that due to their transparency, they do not hide flaws in the finish.
They are smooth, with embossed ornaments and profiled. Smooth are similar to ordinary PVC corner profiles, differing from them in a greater thickness of the shelf. A three-dimensional ornament is often reproduced on the shelves.
For use in classic interiors, polyurethane profiles of complex cross-section, imitating gypsum stucco molding, are produced. On sale there are white and painted in various colors, including imitating wood, you can also find painted in several colors, for example, the smooth part is like wood, and the ornament is like gold. Due to the complex shape, they require great care in installation. Paints used in decoration fit well on polyurethane.
Made from PVC. Visually imitate a tree, metal surface or simply painted in one shade. The palette of monochrome corners contains about 30 shades. If necessary, a white profile can be used with special paints in the desired shade. In decoration, it is used everywhere, second only to white in popularity. For the design of arches and other curved surfaces, there is a special type of corners - flexible or arched.
They are 2 MDF strips glued together with a film. The film is applied with front side, the drawing repeats the drawing on the MDF panels. Due to the fact that the shelves are fixed movably relative to each other, the same profile can be used on surfaces mated at different, internal and external, sharp, straight and obtuse angles. Usually used for wall cladding MDF panels, but can be used instead of any other type of corners.
It is undesirable to use MDF corners in rooms with high humidity.
The options for using decorative corners in the interior design of a room depend on many factors:
To complete the finish after wallpapering, a profile from any of the above materials can be used. The main criterion for choosing a corner will be its color. The choice of color can be approached in different ways. If the joining walls are of about the same shade, you can choose the product to match the color of the walls, if different, to match the color of the wall at which the eye is more often directed. For example, when finishing the corner between the room and the hallway, it is more logical to choose a profile to match the color of the room's finishing.
As one of the finishing options - decorating with a wooden corner, tinted in the color of the doors or the floor, using an impregnation stain and varnished. For the same purposes, products made of MDF and PVC, decorated under a tree, are suitable. When designing a strict laconic interior, metal corners will look good.
To complete the finishing of the slopes, corners are used in the color of the slope, it is almost always white. Often a sandwich panel serves as the materials for the slopes, therefore, so that the material does not differ much, PVC corner profiles are used. The width of the shelf is chosen such that it covers the end of the panel or gypsum board. If there are any defects in the finish near the window opening, for example, unevenly cut wallpaper, the corner is chosen of such a width that these errors are closed.
The angle between the wall and the slope is usually more than 90 °, in order for the corner to lie flat, it should be slightly "unbent" - put on a flat surface or a large-diameter pipe and lightly press with your hands, moving along the corner.
During the cold season, the profile should warm up to room temperature before working.
For walls covered with wallpaper, an option with wallpapering a corner may be suitable. For these purposes, PVC, MDF, wood or smooth polyurethane profiles are suitable. The profile should be of a light shade, because dark may come out from under the wallpaper. Wallpaper is glued to it, the glue is allowed to dry, then, no earlier than the next day, they are mounted on the wall. The wallpaper on the corner must be glued in one piece, of such a size that the wallpaper goes onto the inner side of the shelves.
For the installation of the corner profile, various adhesives are usually used, much less often metal and wooden parts are fastened mechanically with self-tapping screws or nails.
For fastening PVC corners, the following are used:
When using sealants, the profiles must be fixed for 12 hours after gluing with masking tape. The best result is given by liquid nails, some brands of this glue do not require fixing during drying. As a rule, such glue must be applied to one of the surfaces, press the second one, then remove, let the glue dry, and then firmly press the part to be glued.
For the installation of polyurethane products, you can also use liquid nails or special glue.
The surface of the wooden corners must be protected with varnish or paint. The varnish will preserve the texture of the wood, the paint applied in a thick layer will hide it. If it is necessary to give the wood any shade, while retaining the texture, you should use a wood stain or tinting impregnation for wood.
Fasten wooden elements with liquid nails, carpentry glue or PVA. Can also be attached to finishing nails.
When driving a nail, the distance from the edge of the part to the nail must be more than 10 of its diameters.
The plastic corner is glued to the wallpaper using the same adhesives as to any other surfaces, i.e. liquid nails or sealants. It is important that the wallpaper at the installation site is well glued to the wall, wallpaper glue dried up. It is best to wait a few days after pasting the wallpaper and only then do the decoration using the corners.
The drying time of the glue is indicated on the package, and rarely exceeds 12 hours. When gluing to silicone or acrylic sealant, it is advisable to keep the elements fixed for 24 hours.
Decorative corners allow you to solve many tasks for decorating a room. They are inexpensive and relatively easy to mount and dismantle, so you can experiment if you want.
When building a house important role has exterior wall decoration. It not only provides visual appeal, but also protects the house from the influence of bad weather and environment thus significantly increasing the service life. In this article, we will consider the options for exterior decoration of walls and corners of the house, as well as analyze the option of decorative facing the corners of the building from the outside.
Before proceeding with the processing of the outer walls of the house, you will need to first install windows and doors, if the building was just built. If finishing is planned wooden house outside, it is necessary that it shrink. Also keep in mind that wall cladding should be carried out after the wood is completely dry.
You can perform work at almost any time of the year, so there shouldn't be any complications with this. The choice of covering often depends on the material from which the building was constructed. Sometimes simple plastering or painting is enough, and in other cases additional wall insulation will be required.
Also keep in mind that some types of finishes can significantly increase the pressure on the foundation, so make sure the foundation of the building is solid before using stone or brick.
Nowadays, there are a fairly large number of surface treatment methods. Most often, the following are used for external walls:
Let's take a closer look at each option.
The use of stone for the exterior walls will give the house an austere look. Such processing of the outer walls demonstrates the success and prosperity of the owners of the house. The advantages of stone cladding include:
Also keep in mind that due to its properties, the stone will do an excellent job of protecting the surface from the effects of moisture from the outside. The stone can be used both for complete decoration and for partial decoration, for example, for the basement or corners of a building. There are two types of building stone to choose from: processed or untreated. The latter option looks more attractive, but it is a little more difficult to work with it.
Quite often, it is granite that is used for external walls; this option also has a decorative effect. Marble is also used, which has a great variety of shades. The price is really quite high, so not everyone can afford this luxury.
Another disadvantage is the large weight of natural building materials... However, there is a stone called travertine, it weighs much less, while it has good sound and thermal insulation effects. The method of finishing with travertine is greatly simplified, and the price does not bite so much.
Keep in mind that decorating the walls with a stone outside is in any case a rather expensive and difficult task that will require special skills and knowledge from the worker. Therefore, we recommend that you pay careful attention to other types of cladding.
The choice of artificial material - a good option for the treatment of external walls. It doesn't even require any prior preparation. This stone has almost the same performance as the real material.
This method of finishing allows you to give the building a pleasant appearance and at the same time requires only minimal costs. Keep in mind that the texture of such a stone can be both smooth and embossed, so the choice is yours. There is also a fairly large variation in shades that will provide a unique design for the home.
Siding in our time has gained quite high popularity, due to good performance prices and quality. This coating is installed with an overlap - this must be taken into account when finishing the wall. Most of this material is made from vinyl, but there are options in metal or even foam. This treatment of exterior walls and corners has the following advantages:
Installation of siding must be done on the frame of the house. Quite often, insulation is used during installation. The only drawback of this finishing option is the poor combination of siding with other decor options. Please note that installation must be done with extreme care to avoid damage to the material.
The lining is made from natural ecological components, so it will not cause any harm to humans. It is made in the form of a processed wooden board... The lining will provide the house with an attractive appearance, besides, it will visually align the outer wall and provide good sound insulation.
However, such a finish for external walls and corners has almost all the disadvantages of wood, so additional processing with special solutions will be required. Lining is most often made from the following types of wood: oak, pine, spruce, birch, walnut and linden.
Brick will provide good protection for the exterior walls and corners of the house from environmental influences. This processing method can be considered one of the most durable options. In addition, the brick will provide a sophisticated appearance and require little maintenance. The installation method is also quite simple.
Due to the ability to vary the dimensions and shape of the brick, you can create unusual design... Using fired brick will also produce impressive results. The main disadvantages of such a finish are the heavy weight and high cost of the material.
Plaster is mainly used when it is necessary to create decorative effect outer wall and provide fire protection. Decorative solutions are different types, silicate mixtures are especially popular.
Also, acrylic solutions are often used, which have improved characteristics. Decorative plaster for exterior walls and corners is presented in many versions, so the choice will not be easy.
This finish will protect the building from moisture and fire. Significant disadvantages can be considered a low service life, which will not exceed ten years, as well as the need for additional leveling of the wall, and, especially the corners, which will require time and effort.
There are two ways to combine:
The latter combination method has become much more common. These methods will provide interesting interior building and endow it with the properties of each type of cladding.
Corner treatments are often made from the same materials as the wall. It is also the occasion when you want to create a decorative effect. For finishing corners used: brick, stone, plaster, polystyrene, tile and other materials. Remember that working with corners is quite hard work and sometimes it can be difficult to get by without the help of professionals.
For finishing the outer corners of the building, special foam panels have recently begun to be used, which provide an unusual decorative effect. The same processing is suitable for wooden houses... With such a facing, the building acquires the effect of antiquity and becomes like a castle. We recommend watching the following video to see how styrofoam corners are handled in practice:
As you can see exterior decoration walls of the house is an extremely important activity that provides a decorative effect and allows you to achieve additional protection... There are many options, and it will be quite difficult to choose one of them. Each of them has its own advantages and disadvantages, which were discussed in detail in the article. If you wish, you can choose a combination option, however, it must be borne in mind that it will be quite difficult to carry out the finishing, since special skills and knowledge will be required. The choice of exterior wall cladding will only depend on you and your personal tastes and preferences. We recommend watching a special video to learn more about the methods of finishing the exterior walls of the house and their corners.
