In a regular apartment you need to go to laminate 5-7 times. These are transitions from laminate to laminate between rooms. As well as a tile connection with laminate in the bathroom, toilet and hallway.
All these jokes at the door should be made beautiful and monotonous. The thickness and color of floor coverings are taken into account. The easiest way to close the connection is the threshings.
To date, there are more than 10 species. There are even multi-level. This allows you to make beautiful transitions from laminate to thin linoleum and carpet.
And how to keep the laminate between the rooms without a threshold? Experienced finishers are used for this sealant and cork compensators. Let's consider all the options for making laminate transitions. We will understand which one is more beautiful, easier and cheaper.
At the seams will be in any case. After all, according to the instructions, it can be treated with one piece on an area of \u200b\u200bno more than 10 meters. That's why optimal option - Make junctions between rooms.
How to close the seams:
The method of designing joints is desirable to think about the stacking stage. This will allow the master to leave the right clearance between floor coverings. Each of the options involves its features of the installation.
The connecting threshold does not just closes the seam. It is important to make the transition between floor coverings. If the materials are joined different color - The threshold is selected in the tone of one of them.
- Laminated aluminum. A thin film from PVC with a relief texture under the tree is tightly glued to the surface of the clad. It does not break when he is sawing, and practically does not scratch. A wide selection of colors allows you to choose a threshold for any laminate;
- Painted. Special powder paints are used, resistant to abrasion and scratches. Decors resembling laminate coloring are used. The appearance of the thoring is preserved with repeated floors;
- Anodized aluminum. These are classes with shades under gold, silver, copper, bronze, and so on. Aluminum profile is placed in a solution of sulfuric acid, after which the electrical current is connected. As a result, the thinnest layer of a particularly durable oxide film is formed on the metal surface.
Fiction Features:The product from aluminum is easily poured by the usual pilot for metal. In practice, you can enlarge and carefully break. There are 2 ways to fastening:
The form differences:
Cost - Aluminum thresholds are the cheapest option to close the shelves of the laminate between the rooms. A standard 90 cm long profile costs about $ 2. If we talk about steel or brass, such a threshold will be 3-4 times more expensive than aluminum.
In form There are direct, corner and final.
Mounted To the floor with glue, either inserted into plastics mounting plates. The tree is afraid of moisture and temperature drops. Over time, requires updating - grinding, lacquer coating.
Fastened to the floorlike wooden thresholds for glue or fasteners. At a price cheaper natural treebut more expensive aluminum.
Mount They are on a pre-installed plate installed in the joint, just just on the self-tapping screw. The cost is comparable to the price of aluminum thresholds - $ 2.
Usually laminate passes to the tile from the corridor to the toilet, bathroom and hallway. It is in these places it is advisable to use sealants. You do not have to drill the floor, as for the thresholds. However, when placing the joints with sealant there are other features.
Before use, the sealant at the joints is important:
Of the above, it is clear, using sealants you need to decide in advance. In the store we will with a tile of thickness. And still need elastic glue for gluing the extreme row of the lamellae.
What sealant use? Many recommend pouring the usual silicone into the joint. However, he is short-lived and you will have to update the seams in a couple of years. For joints it is better to use polyurethane sealants for outdoor work. Such will definitely last longer.
Operating procedure:
It is a long thin strip from the cortex of a cork tree. The thickness of the compensator is 7-10 mm, the length is selected via the doorway. The upper part of this plank is covered with varnish or paint. You will easily pick up the desired color. The cost of strips from the tube is $ 2-3 per piece.
Mounting method:
Some simply insert a piece of cork in the seam. Do not repeat other errors. He will constantly pop up.
However, neatly install the cork compensator is not just a newcomer. Liked this option Docking? Show it with experienced finishers.
Remember about the monotonous design of seams of floor coatings. Laminate with laminate throughout the apartment can be shown by the same thorns. And in the places of transitions to the tile use a sealant or compensator.
The bends in the place of contact of two floor coverings look beautifully in the design of projects and in the photo, but it is very difficult to make them in real life. In this lesson, we will look at how to make technological shale Tiles and laminate on straight and winding areas.
Fast navigation on the article
There are several ways to make a technological docking of laminate and tiles:
According to "Autonomous Design Manual engineering systems Single and blocked residential houses"(Ventilation section, paragraph 4.84) \u200b\u200bunder interroom door There should be a gap of at least 2 cm for flowing air.
Read more Consider the features of the installation of each option.
When the seams between the two materials are direct - there are no problems with their fit, but the winding sections are difficult to cut. To do this, you will need to make a template from a healthy material (cardboard, polystyrene foam, etc.), according to which make the markup of the future junction.
Instructions for the installation of flexible PVC profile
Conventional threshings with holes are set as follows:
An important nuance: the measurement is made taking into account the platband, and not just between two extreme dots of the box. Then the threshold cuts into the platbands to avoid the slots.
Proper trimming
If the threshold is hidden fasteners:
To remove the backlash - we take a larger dowel and squeeze the hat
From a practical point of view, the appearance of additional thresholds at the junction is not very convenient - the floor becomes harder to wash and you can stumble about it.
Also consider that the laminate must be laid by a floating method, so you should not use to fill sealants, grout or foam.
Comments Powered by HypercommentsRelated records:
Similar entries not found.
There was an opinion that the laminated floor is pretty simple. We will not dispute it, but in the process of work, depending on specific circumstances, certain difficulties may arise. The most common problem occurs when it is necessary to connect one coating with another. Such a situation occurs even when the entire apartment is caught up with the same laminated material. Anyway, you have to meet with the question of how to keep the laminate between the rooms, use the thresholds or to do without it. It all depends not only on the design decision, but also on the technical preparedness and expense of the styling specialist.
The junction between laminate and laminate is performed under the following circumstances:
Using the combination of laminate, you can perform all sorts design solutions. For example, it is possible to visually increase the size of the room. To do this, docking the same coating indoors without installing thresholds.
Combination different materials It is possible to create a unique interior. You can roll the laminated panels of different shades or textures in the space of one room. Board connection is made in accordance with the general design. 
Note: Currently combining two outdoor materials When the room is cleaned, becomes an increasingly used artistic technique, as a result of which the interior design of the room acquires a special charm and uniqueness.
Recall that to lay the laminated panels, the base is required to prepare well, align and clean from all pollution. For bumps of two outdoor materials, this condition is also necessarily.
For docking laminate with laminate, it is necessary to foresee that the panels can have a different thickness, it is 6 - 12 mm. The most good way is to acquire laminated boards, the substrate is the same thickness to avoid the smallest difference in the height of the surfaces. It is very good if the materials of one manufacturer will have to be allowed so that they have the same type of lock connections, the same strength class, and therefore the service life.
How to dock a laminate with a laminate, with a booine or without a neck, and which profile apply for the junction of the laminate?
There are several options to docile laminate with laminate. Consider the most common and less complex.
Most often the connection of laminated surfaces occurs when moving from one room to another, i.e. in doorway. Here you definitely leave the technological gap. With its absence, it is likely that the formation of deformation, swelling of the floor surface. Left gap must somehow arrange. How to close the jokes of the laminate?
Laminate junction in the doorway To our joy, all these questions have long been thought out, the answers for them have long existed, our task is to take ready solutions And correctly apply them. Coating manufacturers produce a variety of components. This includes: substrates, plinth, connecting plates for laminate. The planks for the connection are called a threshold, molding, a profile for the connection. They differ in shape, and are made from various materials.
According to the forms, the docking strips for the laminate can be divided in this way:
Considered products carry a decorative load, but not only. When installing the laminated floor, the presence of a technological gap, which the connecting profiles are made hidden, protect against damage and allow us to have aesthetic appearance.
The connecting profiles are made from various materials.
There are several ways to design a joint line:
With all its advantages:
The case in their serious shortcomings:
Aluminum moldings can be mounted by open-ended by applying dowels and screws. On the aluminum plank, ready-made holes for self-tapping screws, which are sold together with a metal spawning.
Aluminum threshold, open mount The decorative method of fastening - more attractive looks, attachments are not visible, it is hidden under a decorative nozzle.
The mounting profile is connected to the base with self-draws. The decorative nozzle is stacked on top, pressed until it clicks. It closes the traces of fastening, and the joke looks pretty.
How to fix a universal profile:
Quite often occurs such a combination of materials. Both coatings have high quality, but it is necessary to make them right and aesthetically arrange their joint. From this depends the strength of the floor covering and interior of the room.
Consider the case of the connection: the thickness of the linoleum is much smaller than the thickness of the laminated panels with the substrate. There are two connecting paths in this case:
Conclusion
Now you know how to connect a laminate in the junction with a linoleum, how to connect the junctions of a laminate with a laminate between the rooms, it remains to be left to reality. Large problems with dusting coatings will not arise if everything is done according to the instructions. If the connection line of the complex shape or too long, it is better to entrust the combination of surface connection to those skilled in the art.
From such small but important momentsAs the design of coatings, the level of repair and the overall interior of the repaired premises depends.
When arranging the house, there are work with the floors. They laid different materials. Today, the most common laminate. Since it has many advantages. The main one is attractive
Appearance and long service life. His choice is rich enough, so you can pick up for every taste and to any interior. The room in which the laminate is packaged will be cozy, comfortable and beautiful.
Laying this coverage is quite difficult and must be carried out correctly. Otherwise, the laminate will look poorly and will decrease its service life. It is very important not only to consider the basic work on laying, but also additional. So, almost all floor coverings form joints that need to be hidden. Basically, they appear at the intersection different rooms. After all, each of them is covered.
The connection of the laminate and laminate is not enough. Since it needs to be done neatly, so that it does not form a tubercle, which will create obstacles to move people. In addition, it should be quite unclear. Otherwise, the room will not only be uncomfortable, but the look will deteriorate.
As experience shows, specialists with this work can cope quickly and efficiently. Basically, problems arise when a person performs all work on its own. This is simply explained. He does not have the necessary experience and work skills. Therefore, it is more complicated. But you can always take advantage of the advice and prompts of professionals who have already taken into account and thought out.
The design of the compounds is very important when the floor is arranged. It allows you to firmly consolidate the planks of the coating, as a result they will not be able to move in mechanical exposure and other factors of impact. Such a laminate will last much longer.
When performing compounds, it is important to understand that they mean not those joints that are obtained between the tiles when they are styling, but those formed with the material that was laid for a long time. Also, there are a number of cases when it is necessary to conduct this procedure. These include:
The connection can be conducted different ways. The most common use of planks. They form a mix of laminate locks. You can buy them in the same store, where both the main material. It should take into account their differences. They are of different shapes and materials.
So, highlight straight, transitional, corner and final. The first are used in the arrangement of laminate connections with laminate or with a different coating. For example, when making a tile connection and laminate, if the joint was formed due to the drop in the floor levels, then it is better to apply transition strips. Corners are used when working with steps or with the arrangement of podiums. After laying the main coating is made, the edge will appear. They look not aesthetically, so they need to be hidden. For this apply the final profile.
Data additional materials Serve not only as decorating. Also, they will make all the expansion seams hidden.
Planks that are used in compounds are made from different materials. They can be laminated, that is, they are obtained from wood and top covered with a special film that performs the function of scenery. The choice of such profiles is quite large. It allows you to choose the one that will most like the main coating and after installation will not be noticeable. Basically, such compounds are made in the doorway.
Another option of profiles is made of metal. Basically, these works are used brass or aluminum. They are very durable, so they recommend using them in those places where high passability.
You can also apply plastic profiles. They are distinguished by increased flexibility and softness. Therefore, it is suitable for uneven joints. In addition to these advantages, this material has low cost and big choice shades. But the period of its operation is significantly inferior, which is a disadvantage.
Rubber profiles are better suitable for the corners. In addition to the main functions, they will make a much safer movement.
There are different types of compounds. The most common castle. It firmly fixes the panels. Even with significant mechanical impacts during operation, they do not change their position. At the same time, such a connection without additional effort, as it disassembles and is going. In this case, the so-called click locks are used. They can be reused up to five times.
Another advantage of such compounds is that it has a high tightness indicator. So when high humidity Its properties are not violated. This does not affect the process of his disassembly. It goes easy and simple.
Also used adhesive compound. But this method is rarely found, it is not very practical, so over time goes to the back plan, yielding new ways to fastening. To perform this type of lock, glue, which are lubricated by the planks and are applied with the help of the hammer.
This method is not very practical. Since it does not allow to replace one of the boards of laminate or perform it common repair If necessary. And the process of removal of the floor covering is quite complex and long. In addition, the low mobility and flexibility of the joints can be caused by the fact that it breaks.
Over said it follows that it is necessary to accommodively approach the main work on laying the flooring, but also additional, such as connections.
Before proceeding to self-laying Laminate or any other flooring must be in advance to determine how the connection of individual panels will be performed.
After all, it is precisely how neatly the joints will be carried out in many respects the appearance of the future flooring.
First of all, it is necessary to understand in what cases the laminate is required.
Let's notify right away that it will not be about the usual assembly, when one panel is docked on the other, but about situations when it is necessary to use a special connecting profile for floor covering.
As a rule, the need arises:
Note. It is no secret that the locking of the laminate is characterized by an increased density, so that the panels do not "walk" when the temperature and humidity drops.
It is for these purposes to the perimeter of the room it is necessary to leave special technical gaps between the flooring and the wall.
Otherwise, the laminate has nowhere to expand and after a while he will take up in places of connection.
In order not to spoil the appearance of the room and not focusing at the location of the laminate, most often make them in doorway.
In the event that specialists are engaged in the decoration of the premises, the homeowners most often do not even think about such trifles. Well, if, laying the laminate has to do on their own, then, as practice shows, performing even such a simple task as laminate compounds causes serious difficulties.
Fortunately, the owners of the real estate, the modern building market is replete building materialswhich allow you to solve almost any problems.
Almost every manufacturer of laminate produces a variety of components for its own products.
In addition to the substrate for laminate and plinths, their number includes special connecting plates, which are often called a connecting profile or thresholds.
Specialists are recommended when buying a laminate to clarify the seller about the presence of special connecting elements in the store. Since among themselves, they differ in the form, the type of compound and the material from which are made.
All connecting profiles depending on their destination are divided into the following types:
In addition to the above connecting planks, the construction market can also be found in the final profile designed to decorate the open edge of the laminate.
In addition to aesthetic function, all these products are performed and practical functions. According to the instructions for laying a laminate when performing work, the device of expansion seams and technological gaps is required, which can be hidden using connecting profiles.
Depending on the purpose, the connecting profiles can be made from a variety of materials.
For hidden mounting, all the above connecting elements are equipped with a special fastener rail.
Council. Install metal profiles can and open way With the help of self-tapping and dowels. For these purposes, the fasteners are made at the plant in metal strips, and fasteners are included in the product package.
Fastening rails are attached to the base for screws or glue, while the first option is preferable, as it allows to dismantle and reuse the product.
The sequence of the connection of the connecting thread includes the following steps:
It's no secret that every little thing is important in the interior of the premises. That is why at the stage of repair it is necessary to pay as much attention as much as insignificant at first glance with trifles as decoration of transitions, angles and joints.
Using special elements, builders have the opportunity not only to achieve excellent external view Outdoor coating, but also to increase its life.
