One of the common variants of the visual increase in the room in the room is a dismantling of interroom doors. Such a solution allows you to visually expand the premises, create a single space in the interior. At the same time, an important task arises - finishing the doorway. In this article, we collected the most popular and non-trivial ways to solve this issue.
The process of preparing the working surface varies due to materials selected as finishing.
The choice of materials for finishing the doorway on the construction market is also extensive, there will be options both economy-class and expensive alternatives. It all depends directly from the needs, desires and opportunities of buyers, as well as several important aspects:
Using the example of the most popular options for the doorway finish, consider the workflow in more detail for each of them.
This option can be called the most popular through the simplicity of work and the practicality of the use of finishing material.
The only thing about to take care before starting the finish is to cover the floor with a film or newspapers in order not to damage and not contaminate the surface.
It is important to remember that the thickness of one layer should not exceed 2 cm, otherwise emptiness or cracks can form, and this will adversely affect the durability of the finish.
If everything is respected, it remains to wait until the surface is driving, and you can proceed to finish finish: Painting, wallpaper sticker or decorative mixtures.
This material is intended for facing a variety of sections of a residential building, including the doorway. There are no special rules for laying, options are offered depending on the interior design:
Facing the doorway tile or mosaic does not require a special tool or special skills, the workflow consists of phased actions:
So that the products are fixed on the surface of the opening evenly, the plastic strokes should be prepared in advance, which is inserted into the seams between the tiles. It is removed after solidifying the adhesive mass no earlier than 24 hours.
It is very important - if the glue hit the surface of the tile, it should be removed immediately, since it is very difficult to remove the solidising mass.
When the opening is completely enhanced, the seams between the tiles are closed with special grouts, the color of which is selected in the tone of walls or finishing materials.
Another option that is used as an alternative to clinker tiles is a decorative stone. He has several advantages over other finishing materials:
The installation process is very similar to masonry clinker tiles, but there are several important momentsthat you should not forget:
This finishing material is found in two types:
No less popular option for finishing door sluts are wooden or MDF panels, laminated under the tree, which harmoniously fit into the classic style. Benefits include:
The process of installing wood panels or MDF will require you to purchase additional Materials - Wooden rails that will be used as a crate:
To hide fasteners, you can use special furniture wax or sticky plugs, pickup them under the color of the panels.
This finish will look rich, even if inexpensive MDF panels were used with a textured pattern under the tree of exotic breeds.
Many finishers love laminate for its flexibility, which allows these material to be sewed with almost any openings, angles and surchates found in residential premises. The only thing that is worth bothering is - he does not tolerate moisture and after contact with water on the ends of the products, bloat can be formed, and such defects are not eliminated.
Laminate is fastened with self-tapping screws like finishing pVC panels or MDF.
If the walls are relatively smooth, then you can use liquid nails and spacers, which for several hours will pressed the material to the surface of the walls.
One of the most interesting, but in its own way of capricious materials is stucco. Using it in the interior for finishing the doorway, you should withstand a single concept of general design, to fit into the style to which columns are inherent, pilasters with capitals and other similar decor elements.
There are two types of stucco on the construction market:
The benefits of polyurethane decor can also be attributed:
The stucco looks perfect in the frame of the doorway with the arch, especially if the width allows you to erect the monolithic column supports along the edges.
The finishing of the openings between the rooms without the door is complex not only by the choice of the material used, but also to which form will be this very opening.
The solution to this issue will affect the harmony of the transition between the rooms, on the lighting of the premises, the combination of styles in the interior and the practicality of the movement.
Frequently found option is rectangular. This opening remains immediately after dismantling the door box and it has its advantages:
The arch has an interesting ability: in premises with low ceilings, it visually enhances them, and in cases with high - on the contrary, lowers. At the same time, the wider the opening in the form of the arch, the lower it seems the ceiling.
Many prefer such an option for its softness, lack of sharp corners, it makes transitions between rooms more invisible. Ideally fits the arch when leaving the hall, if it is wide enough, the movement between the rooms will be inconspicuous.
A pleasant addition is ready solutions - DOPPORTS OF ARIAL TYPE, prepared for installation in doorways.
This form is used very rarely, this is due to the fact that in small areas such a solution gives the opposite effect: the room does not expand, and the ceiling is visually lowered. Especially in cases where the upper horizontal part of the trapezium is too narrow. It may seem to be the impression that when the opening, it wanted to make an arch, but did not have enough strength and skills.
The polygon will well fit into the transition, where bivalve interior doors were planned or were installed. With the help of drywall, it is possible to easily and without effort to turn the rectangular lumen in a smooth trapezion, consolidating it in the corners of the opening.
The doorway, which embodies the fantasies of the owners of the residential premises - this is an asymmetrical form. Designers love her for the ability to implement the most amazing solutions. The opening ceases to be the border of the two rooms, it turns into an apartment decoration, in that element that attracts the glance and emphasizes the specified style.
However, there are nuances here, which many forget about and in the process of work are faced with difficulties:
Simple but very interesting option Decoring the doorway with a curtain is a look in the past. A few decades ago, people were so distinguished by living space, decorating the passage by wooden or tissue curtains. The desired effect was reached: the boundaries of the room were visually identified, and the closetness of space was not created.
But such solutions are popular and now, that's just a variety of forms and materials has become much larger. Most often bamboo sticks are used, very durable and emitting a pleasant sound when colliding with each other. They can be painted independently in the desired shade or pick up ready option Under your interior.
It is possible to use the curtains anywhere, even on the border of the hallway with the bathroom, though it is a bit intimate, but if the owners of the dwelling are interesting, then why not experiment.
Registration door Piece Without the use of the door - fashionable and modern trend in the interior design.
Such a doorway visually combines two rooms.
Let's start with how and when usually it is resorted to this and from the advantages of this solution:
The disadvantages of the doorway without also have:
It would seem most simple for the design of the doorway without the door there will be simple plastered slopes.
Or made of drywall, covered with wallpaper and decorated with native curtains.
However, not all so simple.
For example, if you often go through such a pass, or your little children, you will inevitably cover the solid objects for the edges of the day.
The edges even reinforced with metallic will eventually go around, and it will look ugly.
Moreover, usually the premises have different wallpapersAnd it will be necessary to somehow solve the problem with the transition from one room to another.
A much more correct solution will arrange a doorway without a door with your own hands using or plastic design. Cut down plastic panel around the perimeter, or a good belt for door boxes.
On the outside of the perimeter of the Owl, you can install platbands, or even simply put a plastic or wooden corner. The platbands are worth put if you have to do the opening in a slightly wall curve - they allow you to get around the curve wall, while the corner can be adjusted as a flat platband, it will not work.
Another option will simply put the finished door box in the opening - it will come true if you do not want to buy, or it is not ready yet. Then you can always embed the loop and put the ordinary door in the doorway.
The easiest option of the design of the doorway without a door is to hang curtains. Depending on the possibilities and requests, there are two curtains options - made with your own hands or purchased in the store.
When buying, you are often together with buy a ready-to-cover curtain opening mechanism, as well as fastening for them. Usually, the curtains for the doorway are quite rigid, and you will need more hard fasteners than for ordinary curtains.
Pay attention to the reliability of the fasteners when buying, on the thickness of the loops on the curtains, etc.
The second is to arrange the doorway without a door with the help of a curtain with your own hands. You can use purchased elements for fasteners, and sew curtains themselves.
You can use both thick tissue and sun-curtains. For deaf fasteners, you can hang two curtains to the upper edge of the outlet tightly, while ensuring the possibility of fixing them along the edges of the day when it is necessary to provide an open passage.
For example, make two open loops from which you can capture the curtains at the top and bottom of the face on both sides.
An excellent version of the design - filament curtains. Threaded curtains are threads from textiles, wooden elements in the form of long beads, ceramic or elements.
They hang down from top to bottom, burning the doorway. Such curtains allow you to pass, without pushing them.
If necessary, they can be provided with a mechanism that will allow them to move them away, or by captures in the upper and lower part of the doorway from two sides to open the discus if necessary.
Registration with non-standard design solutions - any other without the help of curtains or doors.
Technical solutions can be set at design.
Consider a retissive door, screen, door-screen, vertical rolled curtain and blinds as the most common.
The rebeling door is perfectly suitable in cases where it is impossible to provide space for opening.
It represents the door on the rollers that roll on the guide at the top of the door, and moves along the wall.
Of the advantages of this door - original design And reliable insulation of rooms, which is comparable to the ordinary door. Of the disadvantages - a fairly high cost, often fails the closing mechanism than the loops of the ordinary door, the need for maintenance, occupies space along the wall.
Shirma - the simplest option Separation of space indoors. Unfortunately, in Russia, it is quite rarely used by this simple and effective means, in contrast to Japan and other Asian countries.
At the same time, it is very simple not only to close the doorway, but also divide parts of the room without resorting to redevelopment. For example, you can divide the room to the sleeping and general zone only for sleep time, or separate the zone for the computer without resorting to the over-planning of the room. If necessary, the screen can easily be removed.
Shirm can be put in the door. In case you want to hardly fasten it at the installation time, you can use four hooks that shirma is attached to the door.
This will avoid tipping or opening it with young children. Shirm can also be combined with curtains - use for shirma wooden frame, whose elements hang small curtains.
Classical Japanese shirma - wooden sliding frames that are filled with thin paper sheets with a pattern. Such shirma misses the light slightly and is very practical, although it requires accurate circulation. Usually, it is made to access light below about 70 cm.
One of practical features The design of the doorway with the help of Shirma is the ability to close the open only on a part of the height, leaving its top open. In this case, you can watch what is being done in the next room, looking over the screen.
To do this, put the screen on your head lower than your full growth. Or you can simply provide additional light access to, leaving a small plot from above.
In the case when the doorway is wide enough, you can put a screen not for all its length, leaving the time passage of a smaller width, and if necessary, open and close completely. If you have skill in carpentry business, It is easy to make a screen for a loot or for the room in general do it yourself.
Shirma door is an improved regular screen. Usually it is made from narrow wooden tablets. It has a mechanism for opening and closing, similar to the mechanism of window shutters, which is attached to the ceiling or to the floor.
It is preferable that it is fastened to the ceiling - the dirt will not fall into the opening mechanism and it will not be necessary to constantly clean it, but in this case it is impossible to make a screen not in the full height of the proof.
Usually it can be purchased under the order, to order in a workshop or occasionally to find on sale in large stores. In any case, it will cost you Nedlyo.
Rolled curtain is another option to design a doorway, which came from the window. Rolled curtains on the window is a traditional solution when it is necessary to limit light access to the room in bright spring days.
Rolled curtains for the door can also be used. It is attached at the top, and rolls down from top to bottom. Downstairs it is desirable to have at least two fasteners and a hard element below the curtains.
The advantage of the rolled curtains will be what you can, without using the door, close access to your room, lowering the chart and securing it down. From the flaws - the speed will have to roll out, once flexing, which will be uncomfortable for the elderly.
More convenient in this regard will use blinds. Having the same principle of operation as rolled curtain, revealing from top to bottom and closing the bottom up, blinds allow you to make the doorway both completely closed or open and open partially, leaving spaces space between half-open strips.
However, they close and open much easier - it is enough just to pull for a special thread. Of the shortcomings of the blinds, it is worth noting a higher cost and often the inability to purchase enough hard and durable blinds that would come not only for windows, but also for doors.
They can be purchased both in a furniture store and order any color and shade in a firm engaged in installing garage gate-blinds - they can make them for the room. For the price it will be much more expensive than installing the usual door.
How to arrange a doorway without door to the kitchen - On Video:
Sometimes the doors are a banal, which occupies a valuable place, an impractical thing, only chatting on the loop and interferes with freely moving around the dwelling, so the question is increasingly in front of people at the final stage of interior design: what to close the doorway instead of doors , to be practical, economically and tasteful? Leave the opening of nothing wrong - not a way out, since it is necessary to at least visually protect the space of the premises, otherwise the arrangement of the house will look unfinished. The following options are optional than to close the doorway instead of the door, photode design designs of doorways and tips on the introduction of a particular design option.
Registration of the doorway with fabric curtains
For design doorways, curtains are very often used. The use of such a decoring option will help make the room cozy and at the same time isolated from others. Cardina can either quietly hang along the opening, giving the placement of majesty, or be laid in the form of intricate folds, protected in several places, can be decorated with fringe, ribbons, bows - it all depends on the taste preferences of the house owners.
Registration of the doorway with a rapid curtain
It also looks luxuriously with the design of the opening curtains. Such curtains do not obstruct the flow of air and light into the room and perfectly poured into any interior, as they are the most diverse - they are made in all sorts of color gamma, with a pattern, with Lurex, with waters or with beads.
Registration of the doorway with curtains from beads
When it is difficult to choose the door according to the doorway or it is required to save the precious centimeters of a small dwelling, make decorative curtains from beads. Such curtains perfectly complement any existing style (from Glamor to Classics), depending on what material beads are made - wood, glass, plastic.
Registration of the doorway with bamboo rolls
In the process of repair, it may be necessary to redevelop the dwelling and, in this case, you need to determine the better to close the doorway instead of the door. For this purpose, various types and properties of materials can be applied. In this case, you can completely eliminate the opening and comparing it with a wall or make decorative design.
Sometimes there is a need to close the doorway
First you need to determine for what purpose it is necessary to close the doorway, the list of works and the choice of materials that will be used instead of doors will largely depend on it. Perhaps several options:
If you want to avoid wall deformation, use materials similar to those from which the primary design is elevated.
The most radical measure is the full disposal of the opening, in this case it is necessary to decide whether to lay the doorway. For such a goal in most cases optimal option will be brickwork. You can also use foam blocks if the walls are quite thick. Such a layout is best suited for supporting structures.
For carrying walls better decision There will be brickwork
How to lay the doorway with ordinary brick:
There is nothing easier than to close the door opening sheets of plasterboard. This method is perfectly suitable for embedding walls in direct and for the construction of niches. It is much more convenient to work with it, moreover, much less means will need.
Installation of the septum with plasterboard is made by fastening it to the frame. As materials for it, you can use special metal profiles or durable wooden beams. With the first view, it is much more convenient to work, as you can build a design of any form.
Gypsum Carton attached self-drawing on a frame of a metal profile
How to close the doorway with drywall:
Capital elimination of the doorway is not always required, it can be closed with something else. The most popular solutions are:
Decorative options for closing door opening
Decorative curtains are interconnected small fragments: bamboo, vine, beads, threads that form a partition for closing the doorway. Diversity available options Allows you to choose exactly what I perfectly fit into your interior.
The second way to close the opening is the use of fabric. This is a kind of imitation window curtains. As a material, you can use both translucent tulle, a web and dense curtains. To hang them in the opening use cornice. You can simply hang the segment of the fabric or create a complex composition of several different color and texture of elements.
For classic interior An excellent solution is to add lambrequins, but they can be used in modern premisesIf you create an unusual hard lambrene.
Less popular, but one of the most convenient is the option using blinds. They allow, if necessary, completely block the passage into the room. Two types of blinds distinguish:
For doors you can use those and others. Most convenient are still vertical blindsThey do not limit the passage as horizontal. Also variation are Roman curtains or rolls, they can be made of fabric, bamboo or other materials.
Depending on your needs, use one or another approach to solving the problem relative to the closure of the doorway. Each of them has its own advantages.
The most common solution for the design of the doorway is to purchase a solid block, which fills all the space for the finishing. But it is not always possible to take advantage of this option - there are situations where there is a room that is not suitable for the standard parameters of purchased openings. You have to use the trick and the smelting to do is really unusual and beautiful.
Let's deal with how the finish occurs, what materials it is better to use which tools will be needed. We are ready to open some nuances for designing openings without doors, we hope that this information will be useful for you.
This option is a classic that has been used for a long time. This design looks neatly, beautiful and fresh. Of course, provided that the work was performed qualitatively, without flaws. And the dough and the panel are perfect for the framing the doorway without the door. Let's focus in detail on each of the proposed methods.
What it is? Thin rails that are stacked by one to another, the standard size usually does not exceed 250 mm. This material is manufactured using any sheet materials, most often you can meet the rails from MDF and from plywood, less often have to be seen as the original material natural wood. If you want to see in your interior only some particular option, we can say that there is no difficulty in the independent making of good risks. You just need to cut the material and decorate to your taste, at your request. The installation also does not cause difficulties - gradually need to lay the rows of rails.
If we speak in general terms, then this type of doorway facing is almost no different from the previous one. However, if you consider this question more details, it turns out that the possibilities of materials will differ. So, virtually impossible to change appearance Passage, but the panels will help otherwise visually perceive the door.
If you take the material equipped with sheets, you can make a decor for the arch of any size. The principle of laying panels is similar to the connection of laminate boards on the floor. By the way, they can also be used for the doorway.
How to work with the design of openings without doors using good and panels? There are only two uncomplicated ways:
When choosing from these two options, you should know that the extension of the frame is more convenient to use if the doorway is wide. It is perfect for installing the arches in a private house, where the wall thickness depends only on their purpose.
Plasterboard conquers increasing popularity when finishing any surfaces and premises, so it would not be unreasonable to include this material on our list. In addition, popularity comes no accident - this is a universal material for any construction affairs, they can align any plane and create a new one. It is this quality that makes it indispensable when we are talking about working with door arches. There is only one negative feature of this method - unfortunately, drywall is a draft material - using it you can only create a surface for subsequent processing, that is, in any case, decoration will have to produce a separate procedure.
How to propose a doorway without a door with a drywall sheet? We will work with a special glue, which is the basis of gypsum. That is, we will simply stick to the end of the opening. This method gives us the opportunity to patch the seam with the mounting foam, which will surely spoil the whole picture after installation door Block. For further work Sucks will need to sharpen together with the walls so that they do not stand out on a general background.
As a rule, in order to complete the work on the decoration of the gypsum cabarton, either wallpaper, or paint for walls, can also be used by decorative stone or plastic panels. The main advantage of this method of working with the arch is an extensive range of materials for the final finish. That is, you can use both paint, and wallpapers, and plaster with different patterns, and tile.
An important point to consider when working with plasterboard: take into account the formation of condensate. Remember that the liquid is condensed almost under any surfaces, and you need to avoid it. Buy only high-quality material, it will protect the condensate from the settlement in winter.
Consider that condensate accumulates under the plates of plasterboard.
Both artificial and natural stone as a material for finishing have a number of advantages, but they are also inherent in a number of negative factors. Not for each interior design will be good such a type of framing of the doorway. The arch, decorated with brick, will be perfectly fit into the apartment under ancient, or in eco-style, but in the room decorated in the style of High-tech, the stone does not fit.
But compared with the pros, minuses are much smaller. What advantages have such an finishing option?
In addition, pay attention - the range of Pampet variety. You can choose many different options among natural stoneAnd if you choose from artificial - here there is something that will satisfy the most unique needs. Do you want to still use the raw materials for registration? The variability is possible here with different cuts - you simply choose suitable ornaments.
For incomprehensible reasons, they often forget about the tile when the conversation is concerned about the inlet opening finish. It is believed that the tile can be used only for bathrooms, or for the kitchen. And in fact, a huge assortment allows you to choose even the option for the living room - it is not a problem to find a matte, glossy, any color to the tile that will ideally issue a pass between the rooms.
It will be great to look like the transition from the kitchen zone to another room, if you derive the main coating on the opening - it will not be distinguished and excessively rushing into the eyes, but both premises will be careful, the smooth transition is almost always appropriate. If you decide to highlight the arched opening, simply use the tile of contrasting color or on the shade lighter / darker. It is important to notice the details and do not miss the style.
This is an excellent finish option for those who first take care of persistence and strength, while wanting to do inexpensive material. The opening of the chipboard can choose families with children, where mechanical damage is not uncommon. So what are the advantages?
A variety here is small - you can choose a shade, but the texture and other parameters do not change, so it is not possible to improvise as in the case of a stone, but the cost is significantly lower.
It would seem so much said and listed, but we cannot but mention natural tree. To finish all the interior decoration of the house, it is used for a very long time and successfully. The advantages are relative strength, aesthetic appearance, environmental friendliness and simplicity of work. But from the minuses can only be called one, but it is essential - dependence on the temperature drop and moisture. In our climate, with frequent and sharp temperature differences, you will have to carefully monitor the state of the doorway. Well, even in order to separate the arch carefully, you will need an additional, specialized tool.
You decide - if you have enough strength and time to deal with every season to do wood and bring it into a proper form, this option will become a real find and decorate the room.
Door opening without a door or arch looks beautiful and effectively, but still it does not always happen. How to combine practicality and aispical beauty? It is necessary to close the opening so that at any time you can remove the barrier. What means for this can be used now we will understand.
Gardina
The first thing that comes to mind is textiles in all its manifestations. Curtains of different textures are dense, light, translucent, depending on the stylistics of the room, you can choose the most suitable option. For example, if the opening is separated by a stone, and the style of the apartment is Eco, the linen curtains will look great, the main thing is that they do not look too rude.
As a rule, the fabric is hanging on the principle of curtains on a special cornice and is moved on need. You can make the "door" from one canvase, and can be made of two.
Throw curtains
Perfectly fit into the style of eclectic curtains from threads. Here you need to understand that they will rather perform the function of the decor, rather than separate one room from the other. But they look air and do not ignite the space, but opposite the volume will give.
Bamboo rollers
Bamboo will look advantaged in eco-stylistics. For such a design, the doorway should be a rectangular shape, since a semicircular arch will be problematic to close to the end so that it does not stand out on a general background. But if you make a small pocket over the entrance, in which the "blinds" will be collected, you can get rid of this catch.
As you can see, there is plenty of design options - you can choose any at your discretion!
Very often, carrying out redevelopment, the owners of the apartment suffer the interroom door. In such cases, the question arises, how to close the old doorway?
In most cases, it is tightly laid by brick or plasterboard, and then plastering. Let's see if there are other, more advanced use ideas old doorway.
Simple and at the same time fun way to decorate old doorway. We turn the working door to "deceiving". Save doorjambAnd the opening itself is laid by brick on some recess in the wall. Instead of plastering, just tightly close the masonry of the old door.
On the part of the door looks like a real, in fact, the next imitation and an intriguing riddle for your friends. The outer wall of the door can be turned into a small school board and write different useful "reminders" on it.
Saving intact door jamb and the door itself, overlapping the old opening even further in the depths of the wall. It turns out a small closed niche chulatol. Such a design could be very useful on as a mini-warehouse for some kitchen supplies or dishes.
Cons of this option:
a) The depth of Chulana will depend on the door opening radius, b) there is enough space from the next room behind the wall.
The same as in the previous version, however, instead of a deaf door, we use a glazed door. As a result, where there was a doorway, we get a shallow and elegant built-in for dishes or books.
The most common option is the design of the doorway. Here, the door jamb and doors are completely dismantled. The doorway is laid and decorated in the same style as the surrounding walls. In the resulting, for greater functionality, Install the necessary shelves and maybe even backlight.
Finally, the most exotic way to conceal the old doorway is masking. Doorway is not transferred to the doorway, but it changes its appearance. Try to make a rolling shallow cabinet instead of the door.
In the closed form, no one will come to mind that it is generally doorway - Normal built-in wardrobe. To achieve such a disguise, you will need to firmly fit all the overhead elements of the door jammer under the design of the movable locker.
Of course, the need for such a conspiracy is doubtful, but as a creative option to consider the idea is quite possible :)
In the process of repair, it may be necessary to redevelop the dwelling and, in this case, you need to determine the better to close the doorway instead of the door. For this purpose, various types and properties of materials can be applied. In this case, you can completely eliminate the opening and comparing it with a wall or make decorative design.
Sometimes there is a need to close the doorway
First you need to determine for what purpose it is necessary to close the doorway, the list of works and the choice of materials that will be used instead of doors will largely depend on it. Perhaps several options:
If you want to avoid wall deformation, use materials similar to those from which the primary design is elevated.
The most radical measure is the full disposal of the opening, in this case it is necessary to decide whether to lay the doorway. For such a goal, in most cases the brickwork will be the best option. You can also use foam blocks if the walls are quite thick. Such a layout is best suited for supporting structures.
For bearing walls, the best solution will be brickwork
How to lay the doorway with ordinary brick:
There is nothing easier than to close the door opening sheets of plasterboard. This method is perfectly suitable for embedding walls in direct and for the construction of niches. It is much more convenient to work with it, moreover, much less means will need.
Installation of the septum with plasterboard is made by fastening it to the frame. As materials for it, you can use special metal profiles or durable wooden beams. With the first view, it is much more convenient to work, as you can build a design of any form.
Gypsum Carton attached self-drawing on a frame of a metal profile
How to close the doorway with drywall:
Capital elimination of the doorway is not always required, it can be closed with something else. The most popular solutions are:
Decorative options for closing door opening
Decorative curtains are interconnected small fragments: bamboo, vine, beads, threads that form a partition for closing the doorway. A variety of available options allows you to choose exactly what I perfectly fit into your interior.
The second way to close the opening is the use of fabric. This is a kind of imitation of window curtains. As a material, you can use both translucent tulle, a web and dense curtains. To hang them in the opening use cornice. You can simply hang the segment of the fabric or create a complex composition of several different color and texture of elements.
For the classic interior, the addition of lambrequins is an excellent solution, but they can also be used in modern premises, if you create an unusual hard lambrene.
Less popular, but one of the most convenient is the option using blinds. They allow, if necessary, completely block the passage into the room. Two types of blinds distinguish:
For doors you can use those and others. Most comfortable are the vertical blinds, they do not limit the passage as horizontal. Also variation are Roman curtains or rolls, they can be made of fabric, bamboo or other materials.
Depending on your needs, use one or another approach to solving the problem relative to the closure of the doorway. Each of them has its own advantages.