House, design, repair, decor. Yard and garden. Do it yourself

Repair is a costly, thorough deal with all the delights and disadvantages, but what to do, over time everything is bored, it comes and so I want to change something in the usual atmosphere. Such is the psyche of man. No matter how we wanted, but the repair is not passing.

Currently, construction stores are offered a huge list. building materialsValidated at cost and properties. How to start repair: from the floor or from the surface of the ceiling? Of course, with the ceiling finishes. This text material is on how correctly and what to glue baguette. What glue glue ceiling plinth It is worth thinking carefully.

Accessories for repair and finishing works ceiling

First you need to know the varieties of adhesive compositions. A varieties of glue for sticking baguette are different, a huge number of products of this assortment can be found in building stores.

Ceiling plinth (baguette) is a frequently used material for repair and ceiling finishing, which gives the room a completeness and aesthetic appearance.

Baguettes are distinguished by the material from which they produced:

1. styrofoam;
2. polystyrene;
3. plastic;
4. polyurethane;
5. wood;
6. laminated chipboard;
7. gypsum;
8. other materials.

The choice of glue for baguette is important

According to the properties and qualities of the material and the selection of adhesive composition for the plinth.

Glue putty for baguette

Advantages: Fast clutch with a surface; It is possible to parallel to perform work with this material for finishing other surfaces; does not make a threat to human health; It is permissible to use this adhesive composition to work in closed and hard ventilated rooms.

What glue glue the ceiling plinth from the foam is necessary to decide in advance. In relation to the selection of the adhesive composition for adhesive ceiling plinth of foam, it should be proceeded from the fact that the foam - fragile material, glue for it should be chosen carefully and thoroughly, adhesive compositions should be avoided, which contain solvent and acetone.

Universal adhesive compositions will not fit here. In view of the implementation of the correct procedure for choosing glue for such a material follows consult with a consultant in a construction store.
What glue glue plinth on the ceiling, you can suggest sellers consultants, as well as professionals working in the field repair work and finishing.

How to choose glue for baguette?

When choosing glue for plinths, you need to focus on the material from which these products are made. Savings are not appropriate here. First we buy plinth, and then - glue.

The prices for glue for ceiling plinth are different, depending on which material is made by plinth, as well as your own financial capabilities.

If you have a choice of adhesive compositions, then we choose the most reasonable option, carefully study the characteristics of the adhesive composition, consult with the seller or acquaintances that understands it. The cheapest glue option will cost about 60 rubles, 377 rubles - the maximum amount that you must allocate on the glue composition.

Glue for the ceiling plinth of polyurethane is the perfect solution for finishing the ceiling. Both the assortment of adhesive compositions and materials of the production of the ceiling panels.

It is difficult to choose glue for all sorts of panels, if you do not know or do not know how to navigate in a large variety of similar products. Polyurethane - the material is very durablewhich over the years is used in construction and, of course, in the production of ceiling panels.

How to choose glue? Everything is very simple. Glue for polyurethane panels - eco-inase. it the best decision For fastening such panels to the ceiling. Perfectly designed for fastening ceiling tile, wooden products, plugs, rows of other materials.

The fastening of elements can be carried out on a brick, plaster, wood, concrete surface, as well as a gypsum slab. What glue is better for ceiling plinths is a priority question, the answer to which only a specialist can give.

It is difficult to answer this question is definitely. However, when choosing glue, you need to focus on the manufacturer, the material of the panels and, of course, the financial capabilities of the potential consumer. I want to save, but is it relevant to this savings. There is already a choice for you.

Assortment of glue for baguette: how not to make a mistake with the choice?

Glue Putty for Ceiling Plinth

Choosing such a glue composition, you should pay attention to the components that are part of the putty. Special attention deserves the putty acrylic. It can be found in any construction store, ease of use, compliance with standards and multifunctional use made good advertising to this composition.

The price of glue for ceiling tiles from polyfoam can also be different, due to the large number of goods of this profile. You can choose from what, but you need to know what to buy and how to choose. Particular attention to the manufacturer. If a domestic production, it is better to choose a European analogue.

The choice between quality quality and cost finishing material Complicated, but this choice will be done.

Glues-polymers of special purpose - "moment", "Titan"

Advantages: Excellent characteristics of the binding base, rapid adhesion with the surface, strength and reliability of retention of the glued elements. These adhesive solutions are recognized as the best for fastening the baguette.

Special glue contains a solvent whose function is to maintain it in a liquid state. It is for this reason that at your disposal the following adhesive compositions intended for pasting baguette from foam - liquid nails and putty.

Liquid Nails

The advantages of such compositions are: do not harm the materials used in the finish, from which the ceiling baguette is made are capable of keeping the product for a long time.

Distinguish several varieties of liquid nails:

• Nepopiential. The base is an organic solvent, have a sharp smell, a prerequisite for use - compliance with safety measures when working, due to the fact that is unsafe for health. It is possible to use a solution when working in wet rooms.
• Acrylic. They are safe relative to environmental friendliness, recommended when working in dry premises.

What glue glue plinth on the ceiling, solve you. Before purchasing the composition, carefully examine the instructions and specify the seller-consultant information about what material you have made the ceiling plinth. Also the price varies, due to the location of the producer country, as well as due to the quality of the adhesive composition.

Definitely, every man involved in repair wants to save, however, the adhesive composition is not a point of economy.

It is clear that saving, the dutiful baguette will not decorate your apartment, but, on the contrary, will make a discomfort to stay in it, both yourself and your guests.

What glue to glue plastic plinth - an important question for the inhabitants. When choosing such an adhesive composition, you need to focus on the characteristics of the material - choose universal glueIf this is not a foam and other fragile material.

Not all adhesive compositions can be suitable for gluing similar plinths, however, it is still worth stopping the preference on some of them - a few varieties of glue for PVC surfaces. There are manufacturers who have eased the fate of potential consumers by releasing the plastic plinth that performs the role of the profile.

Particularly applicable similar type of plinth indoors with high humidity. In such products there is a groove, which is perfectly included with the lining and even the panel.

The birth of a new design plan leads to the emergence of new design elements. Thanks to this, the concept of repairs and updating the interior of the apartment is constantly changing. Recently quality repairs I meant sticking new wallpapers and edging in the form of multi-colored strips of paper. Modern finish It assumes the use of baguettes that are capable of harmoniously combine the plane of the wall and the ceiling. To create a comfortable and cozy atmosphere in the room, you need to know how to glue baguettes on the ceiling.

The main characteristics of baguetov

Baguette on the ceiling, as an element of decorative design, has several names: plinth, frieze or molding. However, they all have several sufficiently important advantages:

• Ability to mask minor wall defects and ceiling in places of their connection. In particular, we are talking about small irregularities, roughness and height differences.
• Ability to decorate an angle that form walls and ceiling.
• Not complicated mounting workallowing the whole process to implement yourself.
• Minor weight and good plastic properties.
• Wide selection of color and textures.
• Available cost for most consumers.

When choosing baguettes on the ceiling, the material of manufacture, size, texture and type of product surface should be taken into account. Depending on the combination of these characteristics, the cost of design elements is determined. In addition, it is important to understand how to glue baguettes.

For the manufacture of baguettes, the following materials are used:

• Styrofoam.
• Polyurethane.
• Plastic.
• Gypsum.
• Wood.

The first two options are used more often than others and are suitable for any type of design. Plastic baguette is installed along with stretch ceiling structures, wooden elements are suitable only for wooden ceilings.

Selection of adhesive composition

For high-quality gloves of moldings, only proven adhesive compositions should be used. It should be accurately to know that to solve the issue than glue baguettes for the ceiling, the following means can be applied:

• Polymer glue. For such a composition, weak stickiness is characterized, so the molding is accompanied by a small pressure and hold of the element in the places of gluing for some time. This procedure is especially unpleasant when using high length items.
• Silicone and acrylic glue. Both compositions are characterized by a rapid clutch with a working surface, which makes it easier to solve the issue, how to glue baguettes on the ceiling. The factory packaging of glue in a pistol tube makes it easier to solve the task, how to glue the baguette. Due to the thin spout at the tip of the device, the glue consumption can be controlled during operation. Of the disadvantages of such compositions, only the high cost attracts attention.

• Finish wipel or compositions for working with plasterboard structures. Such an option to solve the problem, how to glue baguettes to the ceiling is considered the most profitable economy. Although reliability and time of drying are on more high level. However, it should be known that the putty is very difficult to apply to the surface of the baguette thin layer. In addition, the excess glue or putty must be removed immediately, otherwise it is possible to spoil the appearance of the baguette and the ceiling.

The process of sticking the ceiling plinth

Baguettes for ceiling decoration are glued in two ways:

• Before sticking wallpaper.
• On top of the wallpaper.

In most cases, baguettes have a purely white color, so it is important to perform mounting works with absolutely clean hands. Before walking baguettes, you need to wash your hands with any detergent.

The gloveting of ceiling plinths has several features that should be found for the qualitative implementation of the assembly process:

• Surplus any adhesive composition or putty must be immediately removed by a suitable tool. To purify the surface from silicone and acrylic composition, you can use a rubber spatula or wet rag. Putty is easy to remove with a small wet brush.
• The slots around the ceiling plinth and angular compounds should be filled with adhesive composition completely. It must be remembered that these places cannot be masked with paint or wallpaper.

• In order to in the process of solving the problem, how to glue a baguette on the wall, the edges of the product did not move away from the plane, you can use conventional pins or sewing needles. These adaptations fix two adjacent edges, and after drying the glue - remove. The resulting holes can be lifted with a thin layer of putty.
• Staining ceiling baguettes should be multi-layered. The first layer is applied primer, which masks the covered joints and holes. The second and subsequent layer is the simultaneous decorative design of the ceiling and baguette.

How to stick baguettes over wallpaper

The advantage of this option lies in the absence of the need to customize the wallpaper under the bugeth line, since this element masks all the errors of the upper edge of the wallpaper.

The question of how to stick the baguette on the ceiling is solved in a certain sequence:

• Using the stouch or other fixture, the edges of the plinth under the desired angle are cut.
• On the surface that will be lightened to the plane, the slim layer of the adhesive composition is applied.
• Apply the product to the wall and retain for a certain period of time. Most often, the manufacturer gives recommendations how to glue baguettes using one or another.
• Excess glue is cleaned with a vet or spatula.

• Baguette connections are lubricated with white sealant.
• Apply a layer of finishing paint on the surface of the glued baguette.

The question is how to glue baguettes on wallpaper can be considered solved.

Fixing the plinth before the wallpaper sticker

This option is most often used by professional wizards. Punching baguettes on the ceiling before the wallpaper must be performed according to the following scheme:

• Walls and ceiling are thoroughly align, grinding sandpaper, cleaned from building dust and covered with primer.
• Molding ends are cut under a certain angle using a stubble for greater accuracy.
• Apply to the glued plane of the plinth, putty or glitter for drywall, trying to fill all the slots.
• Press the baguette to the wall and leave the putty to full frost.
• The surface of the molding is ground and cause several layers. finish coat on baguette and ceiling.
• Stick wallpaper on the wall, while the lap the baguette is cut by a sharp knife, applying a wide spatula.

Installation of plinth in angular connections

The last bar must be cut with the smallest error to avoid damage to the elements when sticking baguettes.

Indoor with smooth walls of the plane of the ceiling and walls, as well as two walls are connected at right angles. It is possible to cut the edges of the design elements using a stouch. Before glueing baguettes in the corners, first of all trimming the angular edges, then with a sharp knife or other tool, the baguette is cut to the desired length. The effect of the steps can be prevented by a uniform distribution of gaps between two segments.

Cutting the ceiling plinth with a stouch can be performed as follows:

• The product is placed in the instrument, trying to achieve the position as on the ceiling.
• The lower part of the plinth is very tightly pressed against the sidewall tool.
• Perform cut edges.

If there was no such device at hand, you can use another option:

• Baguette is applied to the left side of the angle and draw a short line along the product.
• Apply the design element to right side Angle and do similar actions.
• The location of the crossing of the lines defines the starting point of the cutting.
• Alternately on the planks mark the place of intersection of lines and make the cut at an angle of 45 0.
• Check the correctness of the cut by attaching plinths to the corner.

Special difficulty addressing the issue, how to stick baguette does not represent. Following recommendations experienced masters, you can perform the entire assembly process with your own hands.

The ceiling is one of the most time-consuming plots when repaired, especially when you need to decorate and decorate the joints of the walls and the ceiling. One of the most original and efficient decoration solutions is to stick baguette (ceiling plinth). To mount baguette, it is advisable to use the services of the finishes, but if there is no such possibility, you can do it yourself. First you need to know what baguette is and how to glue baguettes on the ceiling.

What is the ceiling plinth

Baguette is a decorative element, a ceiling plinth, which gives the repair a finished look and a certain style. Baguette can be easily colored water-based paint, so in the end, they can be different color. Ceiling plinth can have different configurations. You can easily choose the desired view of the ceiling decor depending on the design and style of the room. The main thing is to choose good glue for ceiling plinths and have skills to work with baguettes.

As a glue for mounting the ceiling plinth use:

• gypsum mixture;
• gypsum putty;
• plastering mixture without adding sand.

The use of building mixtures for gluing baguette is explained by the fact that these materials are easily covered with slots, which occur between baguette and walls or ceiling and baguette.

Since modern baguettes are made of foam, liquid nails are used for installation (adhesive). With the help of a special construction pistol, liquid nails are applied to the surface and junction of baguette.

Types of flow decor

Knowing the characteristics of the material from which the baguette is made, you can choose the desired view of the ceiling decor:

1. Plastic baguettes. Economy. Durable, durable and reliable. Do not fear either moisture or sunlight. Universal, suitable for any style and design of the room, due to the fact that there can be different forms and are easy to paint in any color.
2. Aluminum baguettes. Durable, durable, but notable. Suitable for decorating apartments in modern style, as well as for finishing office space.
3. Wooden baguettes. Used in the design of rooms with classic design. Expensive and noble. In order for wooden baguettes to serve a long time, they are treated with special compositions, as the tree is afraid of fire, moisture, dust and dampness.

Since it is difficult to stick baguettes without experience and certain knowledge, it is necessary to learn how to cut the baguette correctly, as well as to cut it in the corners. To cut corners and direct sites, a stub is used - a tool intended for trimming both ceiling and floor plinths made from different materials.

You can use stupid only in those rooms where the angle between the walls and the straight ceiling. As a rule, there are not always 90 degrees in the apartments, so the angles often have to be customized manually.

Order of work

• Preparation. This stage is important. It includes cleaning the surface from dust and primer. Primer is used to align the surface.
• The next stage is a markup that will facilitate the process of sticking the ceiling plinth. For this, the plinth is applied to the corner and is marked with the part of the part that must be cut off. Marking is not required only if the angle between the ceiling and the wall has 90 degrees.
• After the junction of the baguette was adjacent, you can begin to glorify the plinth. If the room is big, it is advisable to start glue a baguette from the corners. The glue on the entire surface of the ceiling plinth must be applied with a surplus, which after gluing should be removed with a sponge or damp cloth.
• If acrylic glue is used in the work, then before gluing baguettes to the ceiling, you must consult with the seller of the construction store or carefully examine the instructions;
• It is important to remember that after using silicone sealants, apply water-emulsion paint On the plinth is impossible.

1. Baguette should be glued along the intended line. Surplus glue to distribute over the entire length of the plinth. Then carefully remove the unnecessary amount of glue with a sponge or damp cloth.
2. A pencil should be noted the desired length of the ceiling plinth, unnecessary removed, the remaining part is glued with glue. Do not forget to miss and join baguette. Small jasoms of joints to sharpen with further processing of seams by sandpaper;
3. To extend the life of the ceiling plinth, the paint is applied to its surface in several layers.

The paint can be applied only after the glue and putty will finally be dried.

The use of ceiling plinth in the decor (baguette) immediately transforms the appearance of any room.

Video

Installation instructions Ceiling plinth:

With baguettes, you can create original design And hide some drawbacks, but during the repair there is a question - how to glue them to the ceiling?

Types of baguettes and their purpose

There are products of different shapes, sizes and materials on sale. Most often found:

• polyurethan;
• foam;
• plastic;
• gypsum;
• wooden.

Often use polyurethane foam moldings, as they are lungs and may have a complex form. Also apply their counterparts, but PPU has best characteristics Strength I. external view. You can easily glue the baguette to the stretch ceiling, a wall or other surface.

Wood products apply when the design of the room implies the presence of this material. Plastic baguettes help unobtrusively arise the perimeter of stretch structures.

As for plaster parts, they are heavier than others. Large samples are additionally reinforced and mounted on a special solution.

This option is suitable for finishing the ceilings in classic style, baroque and similar.

Baguettes are used for the following purposes:

• disking defects at joints and flat surfaces;
• organization of stepped structures;
• registration of the transition between the wall and the ceiling;
• creating an additional decorative effect.

The compositions of adhesive masses

Apply different mixes, much depends on sizes, weight and molding material.

Selects of adhesive masses:

• Solution for putty. The composition, which is suitable when installing baguettes of any type, including gypsum. Apply it with a thin layer so that a large gap between the product and the surface does not occur. It gradually gradually, so it is necessary to provide a temporary support. The rest of the finishing work is carried out after drying the solution. Surplus need to be removed immediately with a spatula and a wet brush.
• Polymer adhesive composition. Mostly this mixture is chosen for mounting tiles based on. Although the time of frozen is reduced, still need to hold moldings a little so that they do not shift under their own weight.
• Sealant. These are silicone or acrylic compositions that quickly and qualitatively connect light baguettes with the surface. Additionally, with their help, the gaps and joints are treated.
• Liquid Nails. Even large elements are glued with this substance. It is enough to put several points or glides of the adhesive and press the molding of the seconds to 30.

Buying baguettes, find out what glue material will be optimal in your case.

Preparatory work

Installation is broken into several stages. The first of these is the preparation of the base, which consists in cleaning the remnants of putty and eliminate explicit defects, for example, emptiness and cracks, bugrov, etc.

The glue is well concluded with the surface on which there is no dust and contamination. If the installation is performed before the final decorative finish, You can safely use primer.

At the same time, the angles are aligned to make the value approximate to 90 degrees.

After you need to prepare baguettes. They are released with a length of 2 meters, so there will be no problems with the installation of direct parts, and the angular elements need to be cut to 45 degrees. Moldings lean to the ceiling to check the junction. If it turned out to be uneven, the connection site is corrected with a sharp knife.

FEATURES OF MONTAGE

The process is similar for all types of materials, but it is worth noting how to glue baguettes on stretch ceiling. In this case, the glue is applied only to the bottom of the product, in order not to spoil the canvas.

It is necessary to comply with some conditions:

• the surface must be prepared in advance;
• as a starting point, the most visible corner of the room is taken;
• the products are joined as closely to each other at the same level;
• connection locations are additionally labeled with white adhesive composition, surplus are removed immediately;
• if necessary, Moldings paint.

When installing on multi-level ceiling structures from drywall problems do not occur. Here, the corners and planes are removed to ideal parameters, you do not need to worry about cleaning finishes. When placing areas along the walls there are much more questions. One of them: What to glue first?

Glowing to wallpaper

This method is considered to be more correct, as it avoids the risk of staining the finished coating. Algorithm of actions:

1. The surface is aligned.
2. Walls and ceiling are ground.
3. Moldings are glued.
4. Baguette is embarrassed on the joints.
5. After drying, irregularities are corrected, the sealant protruding in the seams is cut.
6. The ceiling and baguettes are painted at least two layers.

Wallpaper sheets are taken with a margin, so that it turns out to be a baguette. Then the flat spatula is substituted, and all excess are cut into a sharp knife along the joint line with molding.

Installation over wallpaper

If decorative elements have a complex curly edge, it is advisable to make a stick after the wallpaper is dried.

In this case, it is necessary to mark the line of installation of products. The glue is applied to a part adjacent to the ceiling, and the one that is adjacent to the wall. It is necessary to slightly clean the wallpaper from the vinyl or other coating, without going beyond the markup, then they faster fasten with glue.

Before painting molding it is better to further protect the wallpaper with a film or other material. The single color of the ceiling and baguettes will create the monolithic effect and visually expand the space.

How to put out the walls and the ceiling, choose the correct material and its quantity, prepare the mixture, apply and perform the grout interests many newcomers in construction business. The article proposes to get acquainted with some stages of the work of his own hands, will tell you how to properly perform the initial stages of operations.

Putties are finely dispersed building formulations that have a different consistency affecting its area of \u200b\u200buse.

According to the degree of readiness, the material happens:

• Ready to use. It is implemented in a special container.

The advantages of the composition:

1. there is no restriction in time of use;
2. time is not spent on cooking;
3. no additional tools are needed.

• Dryis implemented in bags or packages.

The advantages of mixtures are:

1. just make;
2. you can prepare any degree of viscosity;
3. it is convenient to store and transport;
4. not high cost;
5. long storage period.

Disadvantages:

1. additional time and tools are necessary for the preparation of the solution;
2. it is important to comply with the proportions and technology of breeding;
3. limited time to use the finished mixture.

How to calculate the amount of putty

It takes into account:

• The largest consumption for decoration of the walls is the starting putty, 30 kilograms of the coating goes to the processing up to 20 square meters of the surface. With a large curvature of the walls, the material consumption may increase. A spacade flow rate determines the value of the irregularities of the surface to be processed.
• When finishing the walls of a universal putty, a bag weighing 20 kilograms is enough for about 24 square meters of the area. At the same time, after such a finish, it is possible not to use the finish putty, but the ideal surface will turn out after the finish mixture, the consumption of which is minimal and the area of \u200b\u200bup to 50 square meters may have 20 kilograms of the solution, which is almost twice as fewer than previous types of material.

To calculate the spacing consumption per square meter:

• The total surface area to be finished is calculated.
• Knowing the entire area and exemplary consumption of the material, its number is determined.

For example, the surface area is 100 square meters, it will take:

1. starting line - 150 kilograms;
2. universal - 100 kilograms;
3. finishing - 30 kilograms.

How to breed putty

For high-quality coating, first of all, it is necessary to clearly know how to breed a putty, the proportions of the solution for surfaces from different materials. Each type of composition has its own dilution instructions placed on its packaging. However, all the nuances are not always disclosed in it and, moreover, when repairing the situation, there may be a different one.

For example:

• When applying a thicker putty layer, it will be more convenient to use a more dense solution, which requires a slightly smaller amount of water than the instruction indicates.
• When applying a plasterboard coating (see Plasterboard Plate: Practical Tips and Useful Information), the equalizing layer of putty is usually very thin. For this, the solution is divorced more liquid.

Tip: Before kneading putty, it should be remembered that it is faster than a thick composition.

• It is better to breed a mixture with small portions, which will prevent its hardening in the tank, and it is impossible to use a re-divorced composition. The reasons for this are:

1. the formation of small lumps, from which it will be impossible to get rid of;
2. the solution will lose many of its qualities and after applying the finish will last not long;
3. the price of such a repair will cost much higher.

• When water, water is poured into the dry mixture, and not vice versa.

• For breeding putty, it is best to use an electric drill with a wedge or a special building mixer. The power of the tool should be at least 500 watts, for the knees of a small volume and 1.5 kW when performing repairs constantly. The number of turns of the drill should be large.
• The kneading of the solution begins with small revolutions, the whisk is gradually deepening and the kneading zone is expanding.
• After the consistency of the solution acquires homogeneity, the number of revolutions increases to maximum.
• The composition remains alone for a few minutes.
• It all mixes everything, which will increase the homogeneity of the mixture.

To better get acquainted with the process, how to make a putty with your own hands, it is worth watching the video in this article.

How to learn to put the walls

Learn to splash yourself not too difficult. But in any case, training must be accompanied by practice. Before starting work, a small mortar is divorced, and the process will be very slow the process first.

Then:

• For experiments, the most imperceptible angle is selected.
• Two spatula are purchased:

1. one solution is applied to the surface, its width is selected over 30 centimeters;
2. the second putty is applied on the blade of the first, in width two times less main.

• For a warm-up, you need to practice in applying material from one tool to another. As soon as the solution does not fall to the ground, you can start the main work.

Tip: Applying a solution on the wall, it is necessary to withstand a large angle of inclination between the spatula and the surface, which will reduce the thickness of the putty applied.

• At first it is worth training a thin layer - after this error is easier to fix.

• After the solution is generated, the working capacity and tools should be thoroughly clean up to perfect purity, which will prevent into a new composition of the hardened particles of the material and the appearance of scratches on the treated surface when applied to it.

How putty is dragging

The walls of the walls after the end of the putty is an important stage of surface preparation, which is especially important before it is painted (see). At the same time, it is necessary to correctly choose the emery paper for stripping putty.

Under the wallpaper, you can not grind the walls, with the exception of the glossy variety of material and silkography.

When aligning walls:

• With the help of plaster, large level drops are eliminated.
• The starting layer of putty makes a more thorough alignment.
• Finish layer (see finishing putty: how to apply a qualitatively) solution performs the finest work and allows you to achieve absolutely smooth walls.

But on the surface there are not very noticeable levels of the level, small tubercles and spindles, scratches, traces from the spatula blades and other defects and flaws. To eliminate these disadvantages, it is necessary to perform the final processing of the finish layer - to poll its abrasive material.

For this you can use various materials For wipping:

• Sandage and fabric.
• Diamond grids.
• Other abrasive materials.

You can work:

• Manually.
• Using machines.

Options for wiping putty can be:

• Manually sandpaper. The cost of this method is the smallest, and the result can be obtained at the right approach, good enough. In this case, the paper is fixed on a special wooden base with smooth and smooth soles with clips or fingers, which allows you to quickly, if necessary, replace the abrasive, and then the surface is grouped by circular motions.
• Abrasive manual grid. The difference of such a method is to use as an abrasive not sandwich, but grids. Her advantages:

1. not clogged with dust;
2. longer service life.

The cost of the grid is higher, but this is compensated by a decrease in the consumption of the material and the convenience that the overall performance of work is done above.

• Electric electric, where paper moves like a belt on the shafts. Due to the large length of the emery strip, it is bent slower, and the mechanical drive increases the speed of work.
• Electric with a grid installed in it. In this case, friction occurs from vibration and displacement of the working surface of the tool from one side to another relative to the handle.
• Electric grater. The friction occurs with a rotating plane covered with an abrasive, which can be a grid and paper.

In addition to paper and grid there are:

• Stones, such as Puma.
• Diamond surfaces.
• Covers with notches.
• Material with stone crumb applied on it.

Instructions for wiping putty is as follows:

• If there is irregularities on the wall and a large number of defects, the largest brand is taken - P60 or 20-N.
• Stacker or grid is clamped on a grater.
• When processing, it is impossible to put pressure on the tool too much.
• The grater moves with circular motions throughout the plane, as in the photo.

• The work is performed until the surface does not acquire homogeneity, without visible flaws.
• The sandpaper brand changes to the smallest and wall again processed.
• To obtain a smooth plane, which is necessary for painting, completes the process of the smallest paper 10-H or P120.

Tip: When working, use the respirator and protective glasses.

• Inaccessible places and corners are better handled with hands without the use of bar or grater. Special devices having sharp corners are used.
• For large volumes of finishing surfaces and short terms, it is advisable to use electric graters.
• In the end, the walls or dust are wiped with a cloth with a brush with a brush, or is removed with a vacuum cleaner.

How to put baguette glue

In addition to putting the walls, other operations can be performed by this material. How to glue baguettes on putty?

The order of work is:

• One baguette is taken and applied to the wall so that he can stick to all the planes.
• Makes with a pencil from above and below its length.
• It is repeated on the other wall.

Tip: At the same time, the method of mounting baguettes is not necessary to use. Begin to glue the baguette with the corners, these are the most difficult areas that take longer.

• Two intersecting lines are obtained. It is applied by baguettes to the stop to the wall, and marks on the baguette at the intersection points.
• The line is carried out through them.
• A sharp wallpaper knife baguette is cut through this line.
• Two angular cuts are obtained.

Tip: Baguettes with sharp knife are easy, but it is necessary to ensure that the notes do not appear. When cutting, a small nuance should be taken into account: when cutting inner corner, the blade of the knife should be tilted to the baguette, and the outdoor leans in the opposite direction.

• The joint is checked, while both baguettes are under the angle, without the use of glue or putty.
• Baguette is glued to the wall and on the ceiling.
• When the error is detected, the situation is corrected using a sandpaper, which is processed by the side of the baguette.
• The finish putty is applied. For this:

1. the material is recruited on the spatula;
2. it is distributed to a smooth layer on two sides of the ceiling plinth, one centimeter layer thickness.

• Baguette is applied to the place, pressed so that the traces of the fingers remain left.
• Excess putty are cleaned with a spatula and the baguette is blocked by a sponge that is moistened in water.
• With insufficiently smooth walls, the baguette is not worth it or it is not worth it, it is better to fill with putty these slits and immediately blur with a sponge.

Proper breeding of putty, careful applying it on the wall, will allow the repair of the premises quickly and efficiently.