House, design, repair, decor. Yard and garden. Do it yourself

Any roof, be it on private or apartment house, periodically needs to be repaired. Anyone, even the smallest disorders of the roof tightness can lead to the fact that the leakage will be observed on the upper floor. In order to repair properly without lacking and overpowering materials, it is necessary to make a estimate in which all the restoration activities will be clearly calculated and the costs of them will be clearly calculated.

Before drawing up the document, the condition of the roof is estimated and an act is performed, which reflects the results of the inspection. These data is transferred to a defective statement and already on the basis of it are estimated. This article discloses the theme of the estimate and the sample is presented.

Mandatory points in the estimate

First of all, the estimate document always indicates measures to remove the old coating, which are performed in several techniques. This includes dismantling concrete screed, disassembly of the insulation and vaporizolation, disassembling parapet, if there is a need for the removal of gutters and waterfronts, dismantling the upper coating of the roof.

The next point will be the restoration of the surface, the list of which can increase or decrease depending on the state in which the roof resides:

• Installation of new parapets
• Property
• Aligning tie
• Laying a vapor and thermal insulation layer
• Installation of adjoins roofing material On the sides
• Installation of new gutters and waterfronts
• Restoration or installation of new ventilation and chimney pipes
• Installation of roofing material

The estimated calculation on the capital replacement will differ from the settlement document to the current, since the first requires large amounts of work, often not just a recovery, but the complete replacement of some sections.

Drawing up the estimates

First of all, it is necessary to accurately determine the restoration of which roof will need: soft, metal, from a professional flooring or some other. It is necessary to make a document in an order that depends on the materials and technologies used in roofing works. For example, to repair the metal roof from the corrugated flooring in the estimate will indicate the replacement of metal sheets and the accompanying actions. There will be no article covering a bitumen layer, since it is simply not on such a roof.

Important! In addition to restoring the document also includes costs of shipping and its rise to the roof.

It is also necessary to determine what type of recovery should be made: Capital or current:

1. Estimate sheet for overhaul. If need overhaul roofing, then in advance should be developed project documentation the organization that has permission to this is, that is, the admission of SROs to such construction works. The created project will be the starting point in creating the estimates of the overhaul of the roof.
2. Estimated leaf at current repairs. The compilation of estimates occurs on the basis of a defective statement, which is compiled by a technician after estimating the state of the roof. Such estimates are also prepared by the company that is attracted to perform the roof restoration work. managing Company. In this case, it is not necessary that the company has tolerance of SRO, since work on technically not difficult and non-dangerous objects can be carried out without it.

The estimate sheet is an official document and must necessarily have a signature of one who was its compiler, as well as the person who checked it. After it is compiled, it must be coordinated between the customer and the performer and assure.

An example of estimates for the repair of a soft roof can be viewed below:

Factors affecting the cost

The compilation of this document is not cunning, but some nuances can significantly change the cost of work. These include:

• The area on which work should be made. Accordingly, the larger the damaged area, the greater the amount of materials you need to use and work should be made.
• The cost of the guided materials on the market, which may vary depending on the supplier.
• Type of work: Capital or current repairs.
• The level of waste is the material that is used to restore the roof.
• The need to use additional equipment, for example, for lifting or transporting.

Professional wizard-roofers of our company will carry out roofing works of any complexity in a clearly specified period. We strictly follow the observance technological process And we guarantee high quality. We work at objects in Moscow and the Moscow region.

Fast calculation

Estimation with fixed rates

Departure to the object - for free

We carry out any roofing work, we guarantee prices at an affordable level. Let's help choose necessary materials and components will provide professional advice. Below is the price list for 2018.

Roofing Rates

Important! The basic rates for the roofing work of 2018 are indicated. The final cost depends on the area of \u200b\u200broofing, the altitude of the house, the type of materials used, the complexity of the roof design and other factors. Prices in the estimate are fixed and do not change depending on the various conditions.

Get detailed information on the features of the work, clarify the rates or order services you can by phone or using the backup application from the site. Our managers will contact you in the near future to discuss the conditions of cooperation.

We carry out all types of works on roofing, guarantee affordable prices and high quality. The cost depends on the type of project, the type of service, the volume of order and other factors. The main part of our objects is office buildings, including vintage. You can order roofing work by phone or sending a request from the site.

In the calculations of the roof, snow and wind load are laid. The carefully thought-out roof design and the angle of the slopes will ensure the unobstructed gathering of snow cover in winter, will evenly distribute the weight of the rafter system on the bearing walls.

The most common types of roof:

• Single. This is the easiest and most economical design of the design that is suitable for small gardening, country and guest houses.
• Double. The roof with two slopes and big swells most often choose owners country cottages Square 60-80 m2.
• Walm. Four-tight roofs with two trapezoidal and two triangular rods use due to their reliability and excellent external characteristics.
• Tent. Four skate triangular shape Connect at the top point. Unmistakable installation and correct selection of materials guarantee durability and attractive appearance Roof.
• Mansard. The top slots have a gentle bias, and the bottom - cool. Under the broken roof, there is enough useful space to arrange an additional bedroom or a working office.
• Dome and conical. Sophisticated vaulted structures with dips and turrets look very beautifully on country large houses with levels of levels.

Our masters have extensive experience in the installation of all types of materials for laying and insulation of the roof, both traditional and new ones. We have the most favorable prices for roofing work, give a long warranty for all types of installation.

When calculating the cost in the estimate, the following roofing works are included - preparation, installation of a rafter system, insulation, cladding and roof liner, installation of the drainage system. Fixed price for roofing work eliminates the overrun of materials and allows you to accurately meet the planned budget.

Used the services of Master-builder Ilya for the construction of the bath on my cottage plot. Performed work remained very pleased, since he is truly a professional with a capital letter, all my wishes were taken into account, and the structure itself was built strictly in the agreed period!

Ilya advised me to take advantage of Mom, since last year his specialists did her repair in the kitchen, and she was in great delight. I liked the fact that all types of work are prescribed on the site and their cost, that is, you can calculate in advance, how much you will cost any service.

We were made canopy for cars near the office of the company. Of course, it was designated individually because it was necessary to equip a large square, and the guys fully coped with their task. As a result, it turned out a very beautiful dome from cellular polycarbonate, which is perfectly combined with the building itself.

The topic of the article is the estimate of the roof repair. Any process carried out by a contracting organization, and this repair or service of buildings and structures, ultimately must be paid. The basis of payment is the estimate that is attached to the contract, as its integral part. That is, this is a fundamental document in which on points is painted, for what operations and how many customer should pay. In the article, we will tell about how they make up the estimate, on what basis, and also give several examples of the compilation of the estimation on the roof covered with different roofing materials.

What is the estimate

As mentioned above, this is a document required for accounting And for planning the events held. It clearly describes the construction operations that will be performed in the process repair work, plus the required amount of materials. Moreover, on the basis of the estimates, it is easy to schedule the time spent on the repair of the roof. Of course, you will have to take into account some factors and take them as amendments.

Based on what this document is drawn up.

There are several criteria that fall into the compilation of the repair estimate for the roof:

What roofing material roof is covered. It is clear that the diversity of roofing dictates and the budget allocated for its repair. For example, an estimate for the repair of a soft roof will be cheaper than to repair the roof covered with ceramic tiles. The reason is the different price of products, some of which will have to be replaced in the process of carrying out repair operations.

The degree of damage to the roof. For example, if the building is operated for a long time, then most likely its roof has undergone significant wear. So, the roofing material will have to be replaced in whole or in part. If the house is operated no more than 10 years, then the repair will turn the replacement of several elements, which will be much cheaper at cost.

Dimensions roofing design . Everything is clear here: more square Roofs, the more materials, time and strength will be spent.

Location of the building. If it is within the city, then transportation costs will be minimal. If the house is located far from the contractor's base, then, accordingly, the customer will have to pay for the transportation of building materials and people.

Season Also an important factor affecting the compilation of estimates. In winter, all work is more difficult to carry out, and therefore the price will be higher.

On our site you can familiarize yourself with the most . In the filters, you can set the desired direction, the presence of gas, water, electricity and other communications.

How to estimate for repair work

Everything begins with the arrival of a specialist. It must inspect the roofing design and determine the amount of upcoming work. Based on its inspection, a defective act is drawn up. This document indicates the condition of the roof, its wear, number of defects and flaws, the size of the roofing structure. And whether only repair or complete reconstruction is required. Mandatory in a defective act indicate the type of roofing material, the design of the rafter system and the crate. That is, the specialist must fully analyze the roof and determine its technical condition.

It is this document to fall into the basis of the compilation of the estimate. Let's consider several roofing coatings for example, and the first will be attacked on the roofing operation of a soft roof.

If it is aimed, the first point in the estimate indicates dismantling work:

removing roofing;

removing a screed of cement-sandy solution;

dismantling of thermal insulation cake;

if there is a need, then include parapet disassembly;

partial dismantling of the drainage system, this mainly relates to receiving funnels and grooves located under the cornese swell;

disassembly of adjustment sites.

On our site you can find contacts construction companiesthat offer services roof Design and Repair. Directly to communicate with representatives, you can visiting the exhibition of houses "Low-rise country".

It is clear that not all positions will be present in the repair estimate. This is a complete list of works, some of which can and get, because they are not fixed in a defective act.

The second paragraph is articles concerning restoration work:

facility of parapet

roof base repair: sealing cracks, cracks and other things;

primer processing;

restoration of thermal insulation cake with the arrangement of protective layers: vapor and waterproofing;

pouring screed;

installation of roofing material taking into account the adjoining sections.

Note that the overhaul of the roof is much different from the current one. For example, if repairs scope roof, which is laid, for example, bituminous tile, then the repair of a rafter system and a solid crate is maintained. And these are large financial investments for the purchase of building materials and huge labor costs.

We add that the list of works associated with the repair of the roof may vary depending on the roofing material used, as well as the use newest technologies. For example, if soft roof Replaced with metallic coating. Here, the repair consists of only the fact that the rolled roof is disassembling and the installation of a metal coating without the use of hot technologies and bitumen adhesive composition.

And one more criterion that is necessarily taken into account by constituting the estimate of the repair work. This is the use of special equipment. This is very relevant when repairing roofing multi-storey buildings. And the higher the house, the topics will have to pay for the operated technique. In this regard, repairing the roofing design of one-story building is much cheaper. After all, almost everyone construction Materials It is raised by hand.

Generalization on the topic or what is indicated in the form of estimates

So, summarizing all of the above, it can be concluded that the estimates for repair work on the roofs of residential, industrial and administrative buildings The following positions is:

List of repair work. That is, according to items, the sequence of the construction operations and the volume of each of them is indicated.

The amount of desired building material by types and types.

The price of the required building materials. There is one point here. If accurate prices are specified, then you need to make documents from suppliers (invoice or invoicing).

Prices for work performed.

Necessarily indicate correction coefficients. This indicator refers to how much the price of building materials and services can rise. Be sure to have to prove the reasons for the growth of cost indicators.

At the end of the document, the total amount is indicated that the Customer must pay for repair work.

Note the photo below, which shows a part of the estimates on the roof from the professional flooring (example), which shows the correction coefficients and the total estimated cost of repair work.

And last. Estimation - a document carrying a legislative burden. Therefore, it is signed on both sides: the customer and contractor. The first gives consent that the document shows, and, accordingly, with the price. The second - offers the type of work, their volume and money he asks for the provision of this service. If the contractor fails to fulfill, any operations, but received payment for this, may be on the basis of the estimates and the contract attracted to the court.

We add that not all owners of private real estate require the manufacturer of the work of the estimate. And this is a big mistake that can lead to the cost of the budget allocated to repair the roofing design. Proving non-fulfillment or poor performance of building processes without this document will be practically impossible.

But there are other positive parties from the presented paper:

you can objectively estimate the complexity of future repair work;

for sure acquire required building materials without overpowering or shortage;

competent plant The whole process from beginning to end.

Let's show an example of estimates on the folding roof of a private house. What should be displayed in it. First of all, the roofing area is displayed, which must be repaired. Plus the value of the sheet iron or paintings of the folded roof at the rate of 1 m². And necessarily adds the number of fasteners.

If you need to repair a rafter system or crate, then indicate how many lumber must be replaced or repaired, as well as the cost of the repair service itself. If the roof is insulated, then work is laid by the repair of the heat insulating cake.

Must be sure to repair the roof of a private house indicate planned accumulations and overhead costs that partially cover the additional costs of the contractor. And at the end, the total amount to the payment is displayed, which is called the estimate.

Video Description

In general, make a estimate, without having special knowledge, it is impossible. Therefore, for example, we want to offer you to watch a video in which a specialist shows how to make a estimate for the repair of a soft roof:

Conclusion on the topic

Estimation for repair work - a document that confirms the budget allocated to this event. He is the basis of payment, it is the basis of disputes. Therefore, before signing any papers, and even more so the estimate and the contract, the customer should deal with them. That is, it is impossible to sign both documents without reading. Particular attention to the final amount. If she suits you, then there are no problems.

Perennial use of the roof will sooner or later require its reconstruction. When the roof overhaul is carried out - the estimate is necessary. It is needed in order to avoid unnecessary financial expenses. It is made up before the start of the work.

Estimated on the repair of the roof of which can be viewed on the site, allows you to more accurately calculate the amount of the upcoming cash costs and determine whether or not the owner of the real estate to pay for work.

What depends on the cost of repair

On the cost of repairing the roof, as shows classic example estimates affect the following parameters:

• the area of \u200b\u200bthe roof to be restored - than it is more, the more significant amount of costs;
• degree of damage to the roof;
• the price of materials that will be required for work;
• scale of planned repair. Often, the circulation of the roof is more expensive than its initial cost when building a building, especially if damage is local.

As experience shows, it is shown to repair it in the photo - the sample is depicted in the photo - it cannot provide all the nuances of the upcoming costs with accuracy to the ruble, so you need to be prepared that a certain additional amount of construction work will be required.

As an example: roofing material, such as metal tile, when installing has a large amount of waste. In the event that the preparation of estimates for roof repair and this circumstance does not take into account, the material may not be enough. Accordingly, the purchase of additional sheets of metal tiles will lead to unforeseen expenses.

When the roof is designed for overhaul, it requires the slightest nuances to take into account its correct final calculation. Particularly affects the costs of the roof covering, and it can be a soft roof or slate materials. The cost of work is influenced by the prices for construction products to buy. So the acquisition and installation of rolled roofing materials will be cheap, at the same time flexible tile It is more expensive, but at the same time the building will have a more attractive appearance and such a coating will serve a considerable period.

Estimation on the installation of the roof reflects not only the cost of buying everything necessary for repair work, but also the cost of paying the services of the builders brigade and attracting special equipment. Such an article costs can be excluded from the estimate if the repair is decided to perform on its own.

Drawing up estimates for repair work

Before proceeding to drafting the estimates on roofing work, it is necessary to have a list (statement) of the required materials and the upcoming volumes of work. It is formed on the basis of a defective act, which is filled in the process of inspection and analysis of the state of the roof. Further, these data is put in the estimate and transferred to the cash equivalent - thus, the full cost of repair work is calculated.

As can be seen, the specimen on the roofing works is provided in the article, including articles and points reflecting the name of planned works and costs for them: units of measurement and their number, the cost of one unit of material. Also indicate the coefficients - correction, recalculation, winter costs and final cost data. In some cases, resource codes and regulatory numbers are prescribed.

As shifts attacking the roof repair - the sample contains its calculation of the cost preparatory work To overhaul. Preparation may include disassembly of roofing, disassembling overlaps and crates, as well as other types of work (in the estimate they indicate in the form of ciphers and codes in a separate graph, which is assigned to these purposes).

After that, constitute the estimated cost of works that are directly related to the roof repair. This is usually the laying of parapet, the performance of aligning screeds, primer concrete grounds Bituminous mixture, creating stropile design, Installation of roofing material on the skates.

The reduced order of repair work, depending on the type of roofing products, can change. For example, when the roof coating is performed, the sheet steel is not required for the roof primer using a bitumen mixture. Instead, the ratio of roofing works includes the cost of laying only the material for the roof.

When all materials (their quantity and cost) are made in the estimate, the types of forthcoming works are reflected, correction factors are indicated, then the final figures for each column and line are bought, where it is provided. At the end of the document reflect the total cost of types of work and building materials. After that, the estimate is signed by persons who worked on its preparation and checked the content. Then this document is subject to coordination with its further approval.