House, design, repair, decor. Yard and garden. Do it yourself

House, design, repair, decor. Yard and garden. Do it yourself

» Where to start repair in a new building. Where to start repair in the new building and what stages it is divided

Where to start repair in a new building. Where to start repair in the new building and what stages it is divided

When buying an apartment in a new building, it is unlikely that you can immediately enter living in her. And it's hard to call it an apartment. Rather, a stone or concrete bag. Neither plumbing, no amenities, nothing to see in modern comfortable accommodation.

All that is - concrete floor, brick walls, windows and doors, which, most likely, have to be changed. Novosel is immediately immersed in long, painstaking renovation to create its comfortable, cozy accommodation.

Where to begin?

The main rule is in repair: do not rush. Moreover, if it is an apartment in a new building. Don't forget that new house About two years will be held shrinkage. If you do fast repair, then cracks can go with the shrinkage at home. Therefore, everything is done not in a hurry, as a last resort before capital, a lightweight cosmetic, inexpensive repair is made.

Think and plan

Very important stage, from which the success of the entire repair will depend. You can plan both yourself and taking advantage of the services of a designer. If it is decided to plan on your own, it is recommended to use special computer programs, you can create visualization and see the future apartment.

Before repairs, a plan is drawn up, including:

  1. Moving walls (except carriers).
  2. Apartment layout.
  3. Determined design and style.
  4. Location of furniture.
  5. Installations of electrical appliances (the placement of wiring depends on this).
  6. Location of plumbing and washbasin (for water supply and drainage planning).
  7. Types and sizes are coordinated interior doors, doorways, threshold height.
  8. It is specified, from which materials walls, ceiling, floor will be made.

Carefully plasdling everything and thinking, you can create a estimate, calculate the number of necessary materials and the approximate cost.

Go to the main

Dirty work

Start repair follows from dirty work:

  • Move and dismantling partitions. If some kind of rough finish was performed - all this is removed.
  • According to the plan drawn up, wiring and pipes for water supply and sewage. It is not recommended to save on materials. Wires and pipes will be wondered, and if they are substantial, it will be very difficult to replace them. To do this, you will have to break the walls and, accordingly, make repairs again. Therefore, it is better to buy immediately good materialsLet it cost a little more expensive.
  • Windows and doors change (those that are installed in new buildings, very dubious quality).
  • If necessary, align the floor Or withdraw it for one level throughout the apartment, cement is made - sand tie.

Bathroom

The bathroom passes a lot of communications: it is a hood, and water supply, and electricity. Repair in the bathroom begins with their installation.

  1. For electrical wiring, only whole pieces of wire and power supply are used. They should be either covered, or are located under the sheets of drywall.
  2. Distribution boxes are installed outside the bathroom.
  3. If the tap pipes are mounted in the wall, it is recommended to use plastic or polypropylene pipes. They are more durable and reliable than metal-plastic pipes on angular compounds (fittings).

On the floor in the bathroom traditionally stacked tiles. You must pay attention to:

  • Aligning the floor and after concrete screed Be sure to make waterproofing using a special impregnation or mixture.
  • When laying the tile, pay attention to the air cavities not formed.
  • Do not save on grout for seams. High-quality grout will get rid of mold and fungus.

The walls of the bathroom are plastering or is trimmed with moisture-resistant drywall shepherds. Wasing with tiles, plastic panels or wallpaper. Many believe that wallpapers cannot be used in the bathroom due to moisture and hot steam, but it is not. Vinyl, liquid, moisture-resistant washable wallpaper, glassy, \u200b\u200bare quite suitable for these purposes.

Plastic panels are used for the ceiling, aluminum profile ceilings, synthetic stretch ceilings. It is not recommended to align the ceiling by plasterboard. Even moisture-resistant sheets will serve no more than 10 years in a wet room. The most budget way to level the ceiling in the bathroom is a moisture-resistant putty with a subsequent painting.

After the repair is completed, plumbing devices are installed, sockets, switches, furnished furniture.

Walls and ceiling

The roughing of the walls and the ceiling, first of all, includes an alignment of the surface.

There are two methods of primary alignment:

  • Wet. Solutions based on dry construction mixtures, plaster, putty. This method is very laborious and dusty, the thickness of the back surface should not be more than 80mm.

When finishing with mixtures, 3 types of solution are used:

  1. Plaster. It is used in cases when the surface has strong differences. Plaster for the ceiling is made on the basis of plaster.
  2. Putty. Designed for embedding small irregularities, chips, cracks. It happens the starting putty (for coarse surface treatment) and the finish (for final alignment and the creation of perfectly smooth and smooth walls and ceilings).
  3. Primer. Deeply impresses the surface, improves adhesion.
  • Dry. Walls and ceiling are aligned with sheet materials, most often used drywall. The lack of such a method is "eaten" effective area Rooms.

Have questions? Ask a lawyer!

Have you purchased an apartment without finishing and prepare to turn it into a cozy nest?

Let's talk about how to make repairs in a new building with your own hands: On the advantages and cons of this operation, as well as how the sequence should be taken for the performance of work.

Repair of an apartment

And a lot of things have to do. When the apartment is a concrete box with bare walls, an uneven ceiling and floor, without windows and plumbing, everyone can drop hands. If it is required to repair the housing from scratch, many are incomprehensible to many, from which end it is difficult to take.

A good option is to find a team of professional finishers, tell them about how you want to see new housing, buy materials and observe the maintenance of the repair by side.

However, the reality is that young families and people with an average intraction are becoming the owners of new apartments today. Paying huge interest on the loan or mortgage, they decide not to spend extra money for hiring workers and try.

Advantages and Disadvantages of Solutions

When you fulfill the apartment repair in a new building with your own hands, the pros is obvious - you save considerable funds.

Another question is that it will take a little longer than when working a professional brigade of masters. In addition, performing the finish, you make it for yourself, which means you are worried about the quality and hack of work just do not allow.

As for minuses. If you think that the repair is easy, you are very mistaken. Even the simplest seems to be very troublesome. At least, starting the decoration of the apartment in a new building, enlist the help of faithful friends and repair benefits.

What you need to know about repair in new buildings

It is worth saying a few words about when making repairs in a new building. The owners of the apartments in the newly surrendered homes must remember that any architectural structures take place for several years the shrinkage process. This applies to a greater degree of brick high-rise buildings and in less monolithic. During the shrinkage, the geometry of the house changes slightly.

At least it is not visible to the naked eye, it is not necessary to notice it according to some indirect signs. For example, one day you will find that the oil in the pan all the time flows on one side, the children's ball strives to ride into the corner of the room, wall panels Strangely outlived, and simply crackled. This is the results of shrinkage.

Not all finishing materials (the same wall panels) withstand traffic at home. They deform together with the walls, crack and even break. That is why experts recommend making repairs in the apartment no earlier than the new building will be 2-3 years old.

However, if you do not have the desire to wait for so long and want to start finishing work immediately, better choose materials capable of withstanding the deformation: wallpapers on a tissue base, stretch ceilings, parquet of natural wood. From ceramic tile, for example, for several years will have to refuse.

Tip! By making the very first repair in the new building, you should not finish with expensive luxurious materials. Choose a cheaper analogue so that it is not so sorry if it is deformed after a couple of years.

Chernovo finish

Where to begin?

Preparation

The order of repair in the new building, as in the housing, which has been fulfilled for many years, in principle, the same. Always begin with the most dirty and dusty works: demolition and transfer of walls and partitions, removal of rough finishing, made by builders, installation of windows, floor screed, pipe wiring and wiring.

Having finished with this part, it takes garbage and move to the roughing of the room, which consists in plastering and putting the walls and the ceiling. Only aligning the surface can be moved to the finishing finish - gluing wallpaper, panels, tiles.

Violation is fraught with an increase in the number of construction garbage in your home, as well as reworking the already performed part of the work.

Dismantling wall

Dismantling of walls and partitions is not such a frequent phenomenon in new buildings. Although many owners of apartments, critically examined the layout of the new housing, are decided to change everything in their own way. Before proceeding with the walls of the walls, it is worth agreed upon their actions with BTI.

Demolition carrier wall As a result, it may lead to serious consequences for the entire high-rise building. There were cases when for this reason the structure completely or partially collapsed.

If there is a need to dismantle the carrier wall or creating the opening in it, it is necessary to strengthen the designs. This is done by welded metal structures from fittings or corners. Since this work requires accurate calculations and professional skills, and also has an increased level of danger, to trust it with specialists.

Everything is easier with interroom partitions. You can dismantle them with your own hands.

Dismantle sequence:

  • If the apartment has already conducted wiring, it is necessary to de-energize everything.
  • Pick up the equipment, you can use a jackhammer, a corner car, a sledgehammer, scrap, hammer, scarpel, all kinds of scrapers.
  • Find a car in advance that takes out the garbage.
  • Get the respirator and special glasses.
  • Remove the plinth, stucco and other decor elements.
  • Usually, interior partitions laid out of bricks. Their disassembly is made from top to bottom, a number of next. If you work a sledgehammer or scrap, strikes on the wall better apply from the middle, gradually expanding the hole.
  • If walls separating toilet and bath are dismantled (there are usually wooden fittings between them), they should be pre-mixed with water to avoid a large dust. Wooden struts can be cut.

Mount the windows, for obvious reasons, stands after the walls are dismantled or opening are created. To do this, we are treated with a flame retardant composition, make the markup in them, heat insulation by means mounting foam. Double glazed windows are attached to window noise With the help of a stroke.

How to make repairs in a new building without hashing the floor? Of course, no way. Floor plates are smooth only on one side of the one that is the ceiling at the neighbors below. To do this, with the help of a water level, the height of the floor is measured, after which they perform a screed with a solution from the sandbetone. Today, the price of the floor screed varies from 300 to 450 rubles. per m².

Layout water pipes - Work that can also be performed independently in the apartment as a whole and in particular. For this purpose, non-metallic and metal-plastic fittings are selected, but the pipes are taken from polypropylene. It is more convenient to apply a thread with a stroke, they are easier to cut down, fenced.

Choosing between the cheaper conductor and more reliable collector wiring, prefer the second one. After all, water will be very easy to overlap in case of failure of any plumbing devices. However, with a tee collection, this problem is solved by mounting the shut-off cranes near the plumbing.

Note! When you make shoes in the walls with the help of a grinder, the diameter of them must be several times the sizes of the pipe. After all, under the influence hot water plastic trumpet Not only expands, but can be bending.

When installing wiring it is necessary to be guided by the following considerations:

  • All counters, sockets and switches must be available.
  • Switches are located in the door area, at an altitude of at least 1.5 m.
  • Outlets are mounted in those places where electrical appliances are planned.
  • The height of the outlets above the floor level ranges from 0.5 to 0.8 m.
  • The number of outlets in the apartment is 1 to 6 m².
  • Wires when installing wiring installed only vertically or horizontally, but not diagonally.
  • The location of each wire must be fixed on a predetermined electrical wiring plan.
  • All connections and branches of wires are placed in insulating boxes.

After performing everything, you can move to plastering, putty and finishing the room.

Summing up

We hope our article was useful for you. In order to more accurately deal with the technological and practical question, our website presents a detailed photo and video instruction in which you will find useful information on this issue.

Photo Gallery
















09.01.2018 Read in 17 minutes.

When buying an apartment in a new building without a decoration, it is possible to seriously save. So the demand for such housing in Moscow and the Moscow region is steadily growing. But immediately after the paperwork, move to a new house will not work - at first it will have to repair.

A typical Moscow new building without finishing is usually about such a picture.

In the photo: Typical Moscow apartment in a new building without decoration

How much will the conversion of a concrete box purchased from the developer in such comfortable housing cost?

In the photo: 4-bedroom apartment 150 sq. M. m in the style of neoclassic after turnkey repair

Where to start repair? And how to control the process? We will tell about this and many other things in detail in this publication with a selection of photos from the portfolio of the Fundam.

Types and cost of repair with draft materials

Repairs in a new building without decoration is a major overhaul from scratch, assumed:

  • laying engineering communications (heating, electrical wiring, water supply, sewage);
  • installation of sanitary, heat engineering and electrical equipment;
  • black finish and alignment of all surfaces in zero;
  • finish finish.

As for the cost of repairing an apartment in a new building without decoration, then it starts from 9,000 rubles in Moscow and depends on several factors:

  • an apartment area (calculation of the price of any repair and construction activities is tied to a square meter);
  • the list and the volume of necessary work (they are determined after the preparation of the technical task, the measurements and are reflected in the estimate);
  • the categories of the used draft materials and the complexity of the project (this factor depends on the type of repair chosen by the customer).

In the company "Fundam" you can order three types of repair in a new building, which are distinguished by complexity and price:

  1. Standard (typical)
  • Budget repairs without a project and redevelopment, during which inexpensive draft materials are used.
  • Performed on the project and implies a change in layout (this can be like demolition inland partitions or the attachment of the balcony and the change in the configuration and purpose of the premises), the use of expensive finishing and modern technologies.
  • Option for those who dream of luxurious repair individual design project And after the end of the work wants to get completely ready for accommodation. So this repairs involves not only the production of building and finishing works using high-quality materials, but also furnishings and decoration of the apartment.

When choosing any kind of repair, the Customer concludes an official agreement with the foundation GC on the production of construction and finishing works. And the warranty on the manufactured repair is valid for three years.

Where to begin? Order and sequence of apartment repair in new building

The phased repair of the apartment in the new building without decoration consists of several phases:

Stage 1. Selection of the type of repair and development of the design project interior

In the photo: Repair of an apartment in a new building - drawings and visualization

"Foundation" performs the whole complex of works on the design of interiors of any complexity, but can repair and on the finished design project developed by another company. If the project is already there, give it to our managers and they will form a repairs estimate on its basis. And to order designers' services, you need to conclude a contract for the design and make an advance of 5,000 rubles.

Important! When ordering repair, the Customers of the Fundam Group of Companies receive a design project for free.

Stage 2. Development and implementation of engineering projects

Since repairs in the new building is performed from scratch, without engineering projects can not do. They are necessary for the installation of sewage, low-current systems, electrical equipment, water supply systems, ventilation, heating. Depending on the complexity of the repair, projects for controlling lighting, built-in vacuum cleaner, can also be developed. fire alarm etc.

In the photo: Repair of an apartment in a new building - Installation of the water supply system

Such documentation is developed within a week, and then on its basis all engineering works are carried out:

  • heat engineering;

Important! As a rule, engineering documentation is part of the interior design project. But if it is not included in the project made by another company, the "foundation" specialists will promptly develop it.

Stage 3. Headworking Works

At the stage of general construction work, which begin after the conclusion of the contract for repairs, is produced:

  • redevelopment of premises;
    • Important! "Fundam" performs all types of resolved redevelopment with coordination.
  • installation of various additional structures (partitions, suspended ceilings, decorative niches, etc.);
  • installation of heat and sound insulation;
  • insulation and glazing balconies and loggias;
  • as well as a rough finish with alignment of all surfaces in zero.

Stage 4. Finish finish

In the photo: Repair of an apartment in a new building - finishing finish

The finishing finish involves the installation of the cladder chosen by the customer (finishing materials are not included in the cost of repair and are paid separately!) According to the approved design project.

Important! The "Foundation" is engaged in the supply of finishing materials and cooperates only with proven partners, so that the company's clients have the opportunity to purchase high-quality finishing from the manufacturer at democratic prices.

Stage 5. Furnishing Apartments

In the photo: Repair of an apartment in a new building - Selection of furniture

If the contract provides for a full range of services, then after graduation finish finish Premises Designers are embarking on furniture and decoration of the apartment. Selection of furniture, lamps, accessories are made through the "foundation" interior salon, where the products of European partners are presented.

Important! "Foundation" purchases furniture, plumbing, textiles and lamps european manufacturers With rich experience and excellent reputation, and guarantees the high quality of all offered products.

Repair services are paid as they are fulfilled - a foreman, a team leading at the facility, one or twice a month closes the acts of work performed, and the customer in the absence of objections and claims to quality. And to track the procedure for performing work when repairing in a new building without finishing will help carry out repair work in an apartment and house "\u003e schedule. It is drawn up on the basis of project and estimate documentation, is an application to the contract for repairs and reflects all the information on the planned work and their timing. implementation.

Repairs from GC "Fundam" in the LCD Moscow and Moscow region

In the illustrations: Our projects on the map of residential complexes of Moscow and Moscow region

GK "Fundam" works with many developers of the metropolitan region and often performs apartment repairs in the new buildings of Moscow and Moscow region. An interactive card on the company's website will help you find the necessary residential complex and evaluate the finished repair of apartments located in it. And as an example, we present you a photo of several apartments after completing our turnkey repair specialists.

Two-level apartment in the LCD "Nine" in Kotelniki

Apartment area: 100 m 2.
Style: modern

In the photo: Interior of a two-level apartment in kotelniki after repair

The cost of such a repair:

The cost of all works: 1,000,000 rubles. When paying on the fact of the work performed on prepayment: 900 000 rubles. Cost of draft materials: 600,000 rubles.
Order Repair

In the photo: The interior of the kitchen-living room in modern style

Functional kitchen-living room solved in contrast color gammamaking space dynamic and ideally suitable for modern stylistics. And the original "cube", decorated with purple-black mosaic, is nothing but a guest bathroom. According to the design of the designers, he looks like an art object, but at the same time it carries important semantic load - In one of his side walls built large kitchen appliances. Such a solution made it possible to ergonomically organize space and expand the functionality of the kitchen.

In the illustration: Mosaic mounting cost

Secret Utu.

In the photo: bedroom interior in warm colors

In the interior of the bedroom in the photo with an originally decorated accent wall in the headboard there are elements of the loft, minimalism and even colonial style. Such a combination looks unusually and very effectively. The special comfort room gives a warm color gamut with a wide range of terracotta and beige shades, Luxurious floor from a wide engineering board with decorative chamfer, as well as thoughtful lighting.

In the illustration: Price on parquet board

Functional border

In the photo: Shellage partition in the interior of the bedroom teenager

A teenager room is a multifunctional room involving competent zoning. In this case, the role of the space separator is played by a high book rack. It visually separates the sleep zone from the rest of the space, but does not prevent the penetration of sunlight. And to support zoning designers decided with the help of light: there were a built-in LED lamp over a bed, resembling a ceiling window-stained glass window, and in the cabinet zone - the track system.

In the illustration: Prices for installation of lamps

Sophisticated relief

On the picture: Original interior Children's room for girls

To smooth the transition between the ceiling and the wall in the interior of the children's room for the girl, the masters were used arched plasterboard. It was secured on a pre-mounted frame made of metal profiles and supplemented the score in a modern style, to connect which the cable line was laid in advance. And the cornice for the curtains fastened so that he "leaving" for the design of GLC, which added volume space.

In the illustration: The price of works on the construction of structures and partitions from GLC

Exclusive finish

In the photo: Mosaic finish in the interior of the guest bathroom

Glass mosaic with glossy glitter and golden segments looks spectacular and expensive. Especially in combination with roughly plastered surfaces. So the design of the guest bathroom, invented by the authors of this project and the masterfully implemented by the "Foundament" finishers, was doomed to success. Designer's suspended furniture facilitates cleaning, and the mirror with lED backlight eliminates the need to install additional light sources in the wash zone.

Two bedroom apartment in a new building on ul. Yunnatov in Khimki

Apartment area: 120 m 2.
Style: Classic

In the photo: Interior three-bedroom apartment on ul. Yunnatov

The cost of such a repair:


Cost of finishing materials: individually
Order Repair


Luxurious interior of a three-bedroom apartment on ul. Yunnatov B. classic style Specialists of the Fundam Group Specialists were created in the framework of the service "Repair in a new building without finishing." In the course of the work of the work, the master paved engineering communications, the warm floors and the system were mounted. Smart House"Aligned all the surfaces at zero and installed the finishing facing.

Shelter aristocrat

In the photo: living room interior in classic style

The combination of high-quality plastered walls of a pleasant peach shade, white plaster stucco and oil covered with oil massive board Creates an aristocratic atmosphere in the interior. And supports its spectacular crystal chandelier, designer cabinet furniture made of natural wood with golden patina and luxurious sofas, upholstered by natural silk of ivory.

In the illustration: price list for wall decoration

Game with light

In the photo: Interior of kitchen with patinated furniture

White furniture with fillety facades and vintage fittings, dining group With a round table, the dome hood - the classic interior of the kitchen in the photo can be called a sample of grace and respectability. A special charm of the setting gives the backlight of the hinged cabinets and apron. Shelves and suspended modules with glass facades are equipped with point lights, and apron from the design tile is highlighted by a warm-glow led ribbon.

In the illustration: Prices for laying work cable lines

Decor with meaning

In the photo: bedroom with rich stucco decor

It is impossible to present the interior in the classic style without elegant plaster or polyurethane stucco. In the design of the bedroom in the photo it was used not only for ceiling and as a frieze, but also to decorate the panel in the headboard. So it seems that the "picture" of beautiful wallpapers with floral pattern is framed by a luxurious stucco baguette. On this background, a curly headboard is very advantageous, decorated with gold-plated thread.

Spa for wonderful lady

In the photo: The interior of the bathroom with a combined trim

Spacious room with a window and an exclusive bathroom on lion's paws is difficult to name the bathroom. Rather, it is a luxurious home spa! For the creation of a pleasant "room" atmosphere, the floor from the ceramic tile, imitating the palace parquet, spectacular panel in the wash zone, sconce with crystal suspension and light curtains from a translucent veil with an image of elegant roses.

In the illustration: Bath installation cost

Four-room apartment in the LCD "Grunwald" in Skolkovo

Apartment area: 120 m 2.
Style: Scandinavian

In the photo: interior of a multifunctional living room in a new building in Skolkovo

The cost of such a repair:

The cost of all works: 1,200,000 rubles. When paying on the fact of the work performed on prepayment: 1,080,000 rubles. Cost of draft materials: 720,000 rubles.
Cost of finishing materials: individually
Order Repair


Turnkey repair in a four-room apartment in the LCD "Grunwald" Brigade "Fundam" Foundation performed in Scandinavian style, using white premises for decoration decorative brick, Light wood and ceramic tiles in light gray-beige tones. Such a cladding made it possible to create a northern flavor in the interior of the apartment in the interior, without losing in practicality and ergonomics.

Maximum transparency

In the photo: the interior of the corridor with a sliding partition

Made specifically for this project Sliding glass partition with classical layout is an ideal solution for creating a transformed space. It visually shares the living room and the corridor, but at the same time it does not prevent the penetration of sunlight into the depths of the apartment and, if necessary, allows you to instantly combine the space. The partition is attached only to the upper guides, so there are no thresholds on the floor. And in order to install it, the masters expanded the opening.

In the illustration: The cost of work on the expansion of doorways

Fashionable minimalism

In the photo: Interior of the bedroom in Scandinavian style

White bedroom in Style Scandinavian minimalism looks extremely simple. There is nothing superfluous: there is only a comfortable bed in the interior, a pair of sconce and television panel, well, the role of the interior accent plays a wardrobe compartment with veneered honeycomb facades. And for the creation of a comfortable microclimate, which is so important in the bedroom, is replied by modern air conditioning installed by specialists.

Charismatic design

In the photo: Teenage girl bedroom with brick wall

To add charisma into a concise interior, it is enough to use the material with a relief surface, such as a white decorative brick. In the room of a teenage girl in the photo, only one wall is decorated, which has a compact future zone and a spacious chest.

Northern coloring

In the photo: Bathroom with original trim

The combination of furniture made of light wood, beige ceramic tiles and white plumbing - the most true way Create bathroom design with northern flavor. And in order for the interior to look more interesting, Designers of the Fundam Group of Companies recommend using two species tiles in decoration, but from one collection: with a smooth and relief surface.

In the illustration: Tile work

4-room apartment in a new building on Novochelemshkin

Apartment area: 120 m 2.
Style: Scandinavian

In the photo: the interior of a four-room apartment on Novochemshkin

The cost of such a repair:

The cost of all works: 1,500,000 rubles. When paying for the work performed on prepayment: 1,350,000 rubles. Cost of draft materials: 900 000 rubles.
Cost of finishing materials: individually
Order Repair


Repairs in a new building without finishing in a neoclassical style is a traditional approach to the organization of space and modern finishing materials. And the four-room apartment on Novochemshkinskaya, where the foundation GK served as a turnkey repair, an example of a functional residential space with a bright personality.

In the spotlight

In the photo: Neoclassical kitchen with dining area in the center

P-shaped kitchen layout is traditional for the classic and neoclassical interior, as it allows you to create an ideal composition and streamline space. And if the area allows, the dining area is better to place in the center of the room, ensuring it with its own backlight. With this role, elegant lamps with long crystal pendants will art perfectly cope. The conclusions of the electricians were made at the stage of roughing and mounting a multi-level ceiling. And above the working surface, posted a spacing built-in in the suspended ceiling.

In the illustration: Price on electrical work

Classic echoes

In the photo: Light neoclassical bedroom with stucco decor

Gypsum moldings that simulate the traditional panels of the boamer are attached to the setting of the bedroom the classic sound and "echo" with strict ceiling eaves. To highlight stucco on the background of the walls and the ceiling, the embossed elements were painted in white color eco-friendly acrylic paintintended for bedrooms and children's rooms.

In the illustration: The cost of mounting the stucco decor

Additional volume

In the photo: repair in the office with the caisson ceiling

Male Cabinet with red-tree furniture breathe aristocracy, respectableness and seems very spacious. This is the merit of the suspended sense of drywall with highlighted LEDs by caissons. It visually lifts the ceiling by adding depth and volume space. And additional sides with crystal diffusers emphasize the second level of construction and give beautiful glare when the light is on.

In the illustration: Cost of work on the device suspended ceilings From G.

Classic and modernity

In the photo: the interior of the bathroom after the end of the repair

The interior of the bathroom in a new building on Novochemshkinskaya is an organic combination of classics and modernity. White furniture with noble patina beautifully looks on the background of walls decorated with fashionable chocolate mosaic with spectacular glitter. With its help, the designers singled out the so-called wet zones (shower, washbasin, bathroom) and emphasized the complex geometry of space.

In the illustration: Cost of wall cladding mosaic

Mysterious bend

In the photo: Built-in wardrobe in the interior of the hallway

One of the advantages of new buildings with free layout is the ability to design a unique living space, taking into account the wishes of the customer. And for this, it is impossible to suit better. radius structureswhich can be erected from both drywall and foam blocks, bricks, plaster plates. In the interior of the corridor in the photo there are also a semicircular wall, and the repetitive bending of the built-in wardrobe. It was placed in a small niche specially equipped for this and provided with radius facades coupe.

In the illustration: Prices for work on the device partitions

Two-bedroom apartment in the new building of Krasnogorsk

Apartment area:94 m 2.
Style: modern

In the photo: interior of a three-bedroom apartment in MKR. Pavshin's floodplain in Krasnogorsk

The cost of such a repair:

The cost of all works: 940 000 rubles. When paying on the fact of the work performed on prepayment: 846,000 rubles. Cost of draft materials: 564,000 rubles.
Cost of finishing materials: individually
Order Repair


Modern interior of a three-bedroom apartment in Krasnogorsk, in MKR. Pavshinskaya floodplain, after repairing turnkey it looks stylish and spectacular. The secret of harmony is a combination finish, a combination of various textures and a successful color solution. The result of the work of the "foundation" brigade was a cozy and dynamic living space with a complex geometry, reflecting the individuality of the owners of the apartment, their views on life and design.

Bright accent

On the picture: Modern bedroom With original backlit

Silvery gray wallpaper with metal glitter - a new generation finish: charismatic, easy to care and environmentally friendly. They look futuristic and create suitable entourage for a luxurious bed, a luxurious velvet, with a curly soft headboard. She plays the bedroom interior a major role and occupies most of the premises. And in order to visually facilitate this massive piece of furniture, the base of the bed was highlighted by LED tape. So it seems that it boils over the floor.

Holiday mood

In the photo: The interior of a bright children's room in a new building

Prank paper wallpaper With the image toy machines Make the design of the children's room bright and create a festive mood. In order not to overload the interior, they were combined with blue acrylic paint, balancing the active print with a quiet trim. And the dark parquet board, laid on the diagonal, gave the foundation of the thoroughness.

In the illustration: The price of finishing works - walls of walls by wallpaper

Successful format

In the photo: Bathroom in modern style

Ratio Cerambula Rectangular Forms in Truffle Color Gamma - optimal choice For the bathroom in modern style. And if you add such a finish with minimalistic furniture in the tone of harmony will be absolute.

In the illustration: The price of finishing works - wall cladding with tiles and porcelain stoneware

In the photo: Guest bathroom in black and white gamme

White top and black bottom - classic and always actual combination. Especially if we are talking about the interior of the bathroom, in which the base is decorated with black tiles, and the upper part of the walls is white. It is better to choose two types of glossy tiles: with a smooth and embossed surface. And the niche formed after the mounting of the suspension plumbing with a hidden drain tank, Designer "Fundam" is offered to decorate design ceramics with an original geometric pattern.

In the illustration: The price of finishing works - wall cladding tiles

How to calculate the cost of repairing an apartment in a new building online?

To determine the repairs budget, you need to calculate its approximate cost. This can be done online even before the conclusion of a contract for construction and finishing work, using calculatorsmont. The calculation in this case will be informational in nature, since the exact estimate can be made only after the measurement and development of the design project, but it will allow planning a budget.

In all cases, the number of stages repair work In the new buildings of Moscow and the Moscow region depends on the type of decoration. The developers offer three varieties of apartments for the availability and quality of finishing works:

  • without finishing;
  • with rough finish;
  • with finishing.

Where to start repair in a new building, in what order to do everything necessary workAnd also to whom you should seek help - you will learn from the further sections of the article.

How to start repairing in a new building with a draft (pre-s) finish?

A rough finish is when there are bearing structures, a floor screed and an entrance door with a lock. The rest depends on the conscience of the contractor: often it happens that brick masonry or fuel blocs No even plaster.

Installation of plumbing during the draft finish is not provided. In the bathroom there are pipes of sewage and water supply, the same thing is in the bathroom. No luminaires on the ceilings, wiring freely hangs from overlap. Most often it is already connected and is isolated. Therefore, when connecting the lamp you need not to forget to de-energize the cable. The presence of sockets and switches is possible, but not guaranteed.

Start overhaul in such a new building needed from planning. Think out where the furniture will be, select a bath or shower cabin, a toilet, typewriter and, before buying, check whether they will fit in the bathroom.

If separate rooms may need to be combined. This already implies the dismantling of the partition. Not everyone can do this job independently: demolition must be neat, because there is a risk of touching important communications.

Additionally, it will have to export garbage, as the legislation of the Russian Federation is prohibited from the storage of construction waste in places for the emission of MSW.

You can order a brigade of masters in our company: we take care of the design of documentation to coordinate redevelopment, dismantling and other types of draft finishing works, as well as on the removal of construction waste.

How do you need to start repair from scratch in a new building without finishing?

Apartments without decoration are naked walls without outlets and other goods. Communications can be summarized only before the entrance, everything else (wiring, connection, tuning) - the troubles of the new residents.

First you need to clarify the developer, which communications will be held in the house. Among the necessary: \u200b\u200bcold water supply and electricity. If this is, you can mount the water circuit, warm floors, boilers, electric stoves for cooking, heaters, and so on. However, you will significantly overpay on utility bills. Therefore, it is necessary to immediately choose a new building in Moscow with all the benefits. In the repair stages of the new apartment without decoration include:

  1. Redevelopment (if necessary).
  2. Wall plastered and ceiling, floor screed.
  3. Installation of plumbing, holding and wiring of electrical wires.
  4. Installation of sockets, switches, gas stove, washing machine and other equipment that will be difficult to move afterwards.
  5. Stretching all surfaces under the finish.
  6. Device of mounted or stretch ceilings.
  7. Decorating the room with emulsion, wallpaper, stucco and other finishing materials.
  8. Laying of laminate, linoleum, parquet or other type of flooring.

If you plan to fulfill all the work quickly and cheaply - it is worth contacting professional professionals. The cost of major repairs in our company begins from 6 thousand per square meter. The price tag already includes building materials, measurements, creating design and execution itself.

How to start repairs in the panel new building?

Panel houses are distinguished by the cost-effective cost, but there are enough minuses. Fortunately, any owner of the housing can get rid of deficiencies, but you need to know several the main features of this type of premises. Stages of repair of an apartment in a panel type new building are largely similar to the stages when finishing a brick building, but with significant differences.

  1. Redevelopment is made only with the permission of BTI, because most walls and partitions in the house are carriers.
  2. Wall shockting and ceiling are made by a thin layer, because the panels are more or less smooth. Considering the increased sound and thermal permeability of the concrete on the layer of plastering something, the panels protecting you from blowing and the sounds of neighboring disputes should be planted. The thickness of each panel varies from 2 to 4 cm, which can affect the inner area of \u200b\u200bthe room.
  3. Installation of plumbing, electricians with control elements and necessary equipment carried out as usual. Washing machines are often installed in the kitchen, due to the uncomfortable planning of the bathrooms. The latter can only be corrected if the BTI gives the demolition of the partition between the two branches of the bathroom.
  4. The arrangement of mounted and stretch ceilings in the panel new buildings of Moscow is hampered by the presence of metal rods inside overlaps. They are fairly quickly drilled by professional power tools, but each unnecessary opening worsens the technological properties of the carrier surface. It is much easier to stretch the ceiling with a building mixture and sack it with a light tile.
  5. Finishing I. redecorating Produced as usual.

Independence in this case can harm more than help. Without experience and knowledge of how to make repairs in a new building, a person will be difficult to even pick up colors for registration, not to mention the performance of physical work. How much is our help in this matter - you already know.

How to start repairing the bathroom in a new building?

The finishing of the bathroom is the last stage, which is preceded by draft work. If the bathroom is separate, and you love spacious premises - you should demolish the partition. The released space is used to install the washing machine, washbasin or lockers for small chemistry.

After redevelopment, choose plumbing equipment. In homes with finishing can already be installed toilet and bath, but their design and quality is unlikely to fit your taste. Buying equipment and equipment for the bathroom after measurements so that it does not turn out that the shower cabin three centimeters is wider than the laid and have to spend time on its replacement.

After drawing the walls, ties of the floor and mounting the main plumbing can be started to lay the tile. The use of drywall without the properties of hydraulic resistance in the bathroom is unreasonable - therefore it is better to leave the ceiling without an additional finish or caress tiles on the moisture absorbing glue.

What is needed to repair an apartment in a new building?

If you decide to finish with your own hands, you will need a lot of tools and building materials. It should be thought out in advance where which decor will be used, calculate the amount of dry mixtures for pulling, make a list of necessary things.

It must be included in it: compositions for removing irregularities on all surfaces, primer, painting ribbons, wallpaper or paint, solvents, tile, linoleum or laminate, guides, levels for testing the quality of work, fasteners, adhesives, outdoor and ceiling plinth, as well as much more.

A person rarely faced with finishing works will not be able to immediately think over the entire front of work and purchase materials with tools at a time. During the tasks, changes may arise, which will result in the damage of materials and the need for an additional purchase.

You can do much easier and more reasonable - hire the brigade of masters from the professional repair and construction company LionGroup. Specialists are engaged in this case, not one dozen years, they know how to determine the exact amount of finishing materials for a specific task.

How to make repairs in a new building?

Immediately after buying housing in Moscow or the area, contact our company. Under "inexpensive" we mean that you do not overpare for the repair and that the estimate will be fixed.

Turning to us, you save on finishing works: We have guaranteed discounts on the majority of materials from manufacturers and direct suppliers, because we buy often and immediately. Terms of completion of turnkey repair depend on its type (capital, elite or euro) and the area of \u200b\u200bthe room.

You can leave the application by phone or through the online form. Managers will send to you a consultant measurer, which will be the estimate and plan of future works. The cost of overhaul (and any other) will be clear immediately after determining the tasks, the level of quality of building materials and other criteria.

Examples of work prices

No. p / p Name of works Units. Change Cost per unit.
Floors
46 Put a wooden plinth pC. 120,00 ₽.
47 Device of polyuritan plinth m / P. $ 320,00
48 Put polyuritan plinth m / P. 120,00 ₽.
7 Dry screed device based on element floor "Knauf" m / 2. 560,00 ₽
8 The primer of the cement base in front of the bulk gender m / 2. 25.00 ₽
Walls
79 Painting of the wall coating of water-level paint m / 2. 360.00 ₽
80 Painting Wallpaper under painting of water-level paint m / 2. 280.00 ₽
83 Laying artificial stone m / 2. 1 400.00 ₽
84 Laying natural stone m / 2. 1 550.00 ₽
85 Wall sheathing clapboard m / 2. 590.00 ₽
Ceiling
101 Put tiled seams on the ceiling m / 2. 200.00 ₽
102 Device stretch ceiling PVC m / 2. 540.00 ₽
86 Ceiling device in 1-n layer m / 2. 950.00 ₽
87 Ceiling device in 2-layer m / 2. 1,250.00 ₽
87 Ceiling device in 3-layer and more (cascade) m / 2. 1 650.00 ₽
Electric installation work
131 Installing the switch (2nd keys) pC. 244.00.
132 Installing and connecting the passage switch (1-key) pC. 456.00 ₽.
133 Installing and connecting the passing switch (2nd keys) pC. 502,00 ₽
136 Installing and connecting a phone outlet pC. 174,00.
137 Installing and connecting fans pC. 1,250.00 ₽
Plumbing
180 Device, Connecting a shower Cabin Art pC. 6 500.00 ₽
181 Installation of fragrant, glass doors pC. 3 300.00 ₽
144 Installing and Connecting a Fine Cleaning Filter pC. 1,250.00 ₽
145 Replacing the valve fittings pC. 450.00 ₽
146 Installing and Connecting a Water Counter pC. 650.00 ₽
Dismantling works
205 Dismantling of old lag. m / 2. 155.00 ₽
206 Dismantling of a sandy cement screed m / 2. 240,00 ₽
207 Dismantling tile m / 2. 255.00 ₽.
208 Dismantling of old linolium m / 2. 215.00 ₽
190 Removing old lacquer coatings m / 2. 260,00 ₽
Subsidated work
213 Removing construction trash gazelle 2 500.00 ₽
214 Export of construction trash container 4 800.00 ₽
216 Lifting construction material kg. 2.00 ₽
219 Cleaning an apartment after repair m / 2. 80.00 ₽
220 Delivery of rough material (Gazelle 1500 kg) pC. 1,250.00 ₽
Sucks
224 Grinding of slopes before putty m / P. 50.00 ₽
225 Putty slopes m / P. 250.00 ₽
226 Grinding of slopes m / P. 180,00 ₽.
227 Finish wipel m / P. 250.00 ₽
230 PVC slope m / P. 460.00 ₽
Mounting work
248 Installation of accessories (hooks, holder, stand, door lock) pC. 450.00 ₽
249 Installation of outflowers in the San. Knot pC. 1 350.00 ₽
250 Assembly and installation of outflowers of san. Knot pC. 2 160.00 ₽
236 Construction of foam block partitions m / 2. 680.00 ₽
237 Brickwork in 1/2 Brick m / 2. 1 350.00 ₽

Tsugunov Anton Valerevich

Reading time: 6 minutes

When buying housing in a new building, many future real estate owners choose the option with minimal finish. First, it avoids extra spending and not pay for the repair made by the developer. In comparison with the cost of an apartment, the amount is not very significant, but also the quality of the materials used and works often leaves much to be desired. Secondly, even with minimal financial investments, you can choose finishing options in accordance with your taste and wishes. However, the repair of an apartment in a new building from scratch has its own specifics that need to be taken into account when performing construction work.

Preparatory stage

First, you need to formulate requirements for future housing and decide on the number of rooms, their functions and location in the apartment, style and color solutions premises. It should be considered:

  • an estimated amount of financial investments;
  • maximum repair time;
  • shrinkage building;
  • the degree of suitability for settlement.

Shrinkage ─ Inalienable attribute of any new building. Monolithic or team-frame buildings are uniformly and usually without distortion, so in the presence of housing in such a house you can almost not limit yourself across the scale and cost of repair. Panel structures combine the flexibility of carrier fences and high weight, resulting in a large and uneven, but a speed shrinkage. About a year later, you can start finishing the premises.

Brick houses settle smoothly and evenly, but a longer period, so it is impractical to use expensive materials for repair: due to shrinkage and high-quality wall panels, and exclusive parquet can be deformed.

Where to start performing finishing from scratch depends on the degree of fitness of the room to settle. In monolithic houses, housing is given under free layout, in which there are no partitions in the apartment and the wiring of communications.

With black finish in new buildings, the floor is usually aligned, walls and ceilings, made to cranes and heating devices are connected.

Repairs in a new building with free layout and draft decomposition differ in the list of work carried out, but similar to the steps of their execution.

Redevelopment nuances

Competent organization indoor space In the residential premises allows them to be used more efficiently. However, the installation of piping blocks, brick or sewer in free planning apartments must be coordinated with controlling authorities. Similarly, you will have to do and, if you wish to carry the wall to be destroyed, in a new building with draft trim.

Often during the repair, residential rooms are combined with a balcony or loggia, getting premises large Square. In order for them to be comfortable, a complex of warming measures are carried out, for which the heating batteries sometimes take out. Such options are prohibited and subject to imposition of a fine.

After receiving the necessary permits, and before starting to build walls or destroy partitions, you need to become familiar with the regulation of construction and installation works in the new building. It usually establishes management Company or HOA, describing the following:

  • the procedure for using elevators, including cargo;
  • requirements for packaging materials and construction garbage;
  • the beginning of work that is accompanied by loud noise and vibration.

Then, having bought the necessary materials in accordance with the conceived design, proceed to the repair of housing.

Windows and doors

When renting housing in a new building and an entrance door. During the repair from scratch, their condition and quality of installation should be appreciated and decide on a possible replacement. If the windows are still decided to leave, then it is desirable to insulate them and check the tightness. Entrance door It is advisable to replace, since the developed by the developer does not ensure the safety of the apartment. How should it hang it? When installing in full scheme door box Maybe a story because of the shrinkage of the house.

At first, especially in the panel houses, the doors are preferably placed on the security anchor, and a year later to establish capital. For what you need to knock down the plaster from the door slope, align the canvas and the box and rigidly fix their position.

Due to the possible shrinkage, it is advisable to refrain from replacing in the apartment. At least, it is not necessary to install expensive models with glass inserts in the first year.

Engineering Communication

One of the important stages of repair from scratch is the wiring of the power grid, water supply and sewage. In addition, many houses are carried out fiber, in which all low-current systems are held together: TV, Internet and telephone.

What is the wiring of the power grid? First you need to install with automatic machines. Then calculate the power consumption in each room and the locations of the cable are planned. It is paved on the walls outside, closing with special boxes, or stretched along the strokes. Cable cable ceiling lamps Make using corrugation. Also interposed in the wall, for which it makes the recess of the desired size.

Depending on the degree of readiness of the apartment before the introduction of the house, the installation will require installation or replacement of the shell and toilet.

Aligning surfaces

Work on the leveling of walls and ceilings are carried out, given the shrinkage at home. The tie of the floor in the new building can be done immediately, and stacked:

  • thermal insulation;
  • cement and sand mixture of software.

The screed should not be afraid, since slabs that do not change their linear dimensions are used for overlaps.

Wall alignment can be carried out in several ways. In panel and monolithic houses with differentials less than 50 mm, it is advisable to use the plaster with the subsequent color or pasting.

With a significant curvature, the walls are aligned with. This method is desirable to use for repair in brick residential buildings.

Start from the construction of a frame of metal profiles, to which they are fixed with self-draws. The joints between them should be minimal, for which they are sealed according to the reinforcing tape using, and after drying the surface it is grinning.