Radius wardrobes of the coupe - a special type of furniture, which received its name due to curved doors, which can have different size and shape. In the article, we will look at the main varieties of designs and will understand the advantages and disadvantages of this solution.
First we consider the main varieties of designs. They are more than you think, and they all have their own features. Then we will analyze the advantages and disadvantages of curved cabinets so that you are determined whether this solution will suit your situation.
Of course, each cabinet is made individually and can have any form, but all options can be divided into several main groups:
Illustration | Description |
Corner convex structures. Their main advantage is a big capacity, because inside the mini-dressing room is actually obtained, which can be found. This type is great for large premises, in small it is better not to use it, as it clings to the space.
|
|
Corner concave options - occupy a lot less place and their main advantage. Thanks to the curved form, such cabinets do not create interference when moving and can be put in almost any rooms. They are suitable for both direct corners and the angles of the wrong shape, in which it is unlikely to get another furniture. |
|
Prienna radius design
. Interesting solution For rooms in which there is only one of the walls. The option looks very unusual, it has access to it at once from three sides, which is very convenient, because you can open any part if necessary. Of course, this type of cabinets protrudes on a sufficiently large distance, so there is enough free space before it.
|
|
Combined cabinets. Combine both convex, and concave sites, due to which you can pick up optimal option For any room. Due to the characteristic form, this option is often called the "wave". This is the most variable type of radius cabinets, but in the manufacture and design it is more difficult due to complex lines and large sizes. |
To begin with, we will analyze the advantages of radius cabinets:
Now we will deal with the disadvantages of this type of furniture:
Now you know all the necessary information about radius wardrobes - their varieties, advantages and disadvantages. The video in the article will tell more information so that you understand the topic even better. If you have any questions after reading, write them in the comments.
April 2, 2018.If you want to express your gratitude, add clarification or objection to ask the author - add a comment or tell me thanks!
Standard rectangular furniture is widely used now, but designers constantly develop models of unusual geometry. With their help, you can transform the interior, add softness and originality. Such a group of products includes a closet with a radius facade.
Model design is distinguished smooth forms. Dimensions and design depend on the features of the room in which the installation of furniture is planned.
Models of unusual shape have a number of features. Some are denoted by the plus sign, while others are minus.
The advantages of such furniture is:
However, weaknesses are also present:
There are several ways to classify such furniture.
First of all, products are divided into convex, concave and combined.
Convex facades are best suited for installation in little room (for example: hallway). Conventional furniture there is quite difficult to post.
The semicircular cabinet will be appropriate to look where enough free space decorated in the style of Hi-tech.
If the doors are concave inside the cabinet, the effect of expanding the space and smoothing the corners is created. The room acquires a greater volume and depth.
The simultaneous use of facades of the first and second species gives a wave-like or s-form. This approach is often used to furniture for living room, nursery, bedrooms.
By design, the radius cabinet may be an angular or appropriate.
The first type is used most often. He possesses affordable price, not too high complexity of installation, suitable for any room and best fulfills the task of saving space. If it has a convex facade, it will delight a lot of capacity.
Power modules are easier to arrange indoors with proper geometry. When combining them, a common facade of the curved form is obtained.
If we talk about the design, the radius cabinet can be built-in and case. Each type has its strengths and weaknesses.
The corpus version consists of side walls, bottoms, covers and rear panels. It can be rearranged if necessary. However, it is characterized by a higher cost, as well as a reduced internal volume compared to the built-in model of the same size.
In the production of the housing use several types of materials.
If we talk about the thickness of the LDSP used for the sidewall, it happens 16, 18, 25 mm. The higher the value, the more reliable there will be furniture. The structure of the material consists of 3 layers. At the edges, it is more dense, which provides protection against mechanical exposure. Medica, on the contrary, is distinguished by loyalty. This allows you to securely hold the fasteners.
There are several ways to fasten the rear panel.
Sometimes the rear panel consists of several parts. They are combined with a plastic profile or reinforced tape. But it is better to stop the choice of product with a solid surface.
The built-in furniture is characterized by the fact that part of the functional parts replace the walls, the floor and the ceiling of the room. Its dimensions are determined by the individual features of the room. Change the location of the built-in cabinet will be difficult, but such furniture will allow you to use the allotted place in the best possible way. For its device, an internal filling and facade will be required. However, that the product function without surprises is necessary to prepare the selected area: check the strength, align the surfaces and conduct finishing works.
Radius facades have limitations associated with the possible bending limit of the selected material. Exceeding extreme values \u200b\u200bwill result in rapid destruction of structural elements. When calculating the place of furniture, the area of \u200b\u200bthe room and designer solution. The external radii is 300, 700 and 1000 mm, and the internal are represented by one value - 300 mm.
The number of doors is calculated based on the length of the arc. It must be considered as follows:
For the manufacture of facades use several types of materials.
Decorative design is performed in different techniques:
Cabinets with radius facades can be equipped with swing doors or sliding sash systems by type of coupe.
Models with round-in-form swing doors are much less common. Although they are distinguished by silent work and attractive appearance. Curved door canvas Mixed on the frame with the help of loops. So that the sash closed to the end, the mechanism is equipped with an automatic closer.
For radius facades, the following types of loops are used:
Despite the presence of a closer, the door often does not slam completely. This is due to the violation of the geometric parameters of the sash or frame. In this case, it is worth installing a loop with a large dechlop angle or adjust the height using a wedge plank.
A radius wardrobe with swing doors simplifies access to content, thanks to the full opening of the sash. And also such a system does not reduce the useful volume of furniture.
In the sliding facades with the door of the rounded form, the motion is carried out along the curved guides using the rollers. There are 2 types of mechanisms.
For the manufacture of guides, aluminum or steel are used. The first option is different best characteristics (stability, low noise).
Filling of any cabinet depends on its purpose, the radius models are not exception.
If the product is intended to accommodate the home library, then all the inner space is occupied by the shelves. The distance between them is defined as the length of the standard book plus 15-20 cm.
In the case when the furniture is planned to be used to store collection, beautiful items, dishes, it will be reasonably installed glass shelves and add them backlight.
Most often, the cabinets are needed to accommodate clothing and other items. Interior space Conditionally divided into 3 zones. Under the same ceiling is the mezzanine, a wide shelf or rod with a lifting mechanism. In the middle part there are shelves, drawers and ordinary crossbar. The lower tier is given to shoes, travel bags, suitcases, household appliances (For example: Vacuum cleaner, iron).
To organize a convenient and rational storage system use the following elements.
To achieve effective use Internal volume, shelves are performed based on the form of the facade.
If you want to choose the rightly select a radiuscase, you need to pay attention to a number of nuances.
The rounded form of furniture will help rationally use the space of any room and create a unique interior.
If you have any questions or suggestions, you can contact us by email: [Email Protected]website
P.S. We do not sell furniture, we only help you familiarize yourself with what happens and navigate in the choice.
Radius corner cupboard coupe - non-standard solution To fill the corners in the room. They have a large capacity. In addition, side open racks complete the composition and add an additional place to store memorabilia and decor elements.
Cabinets such a design have many advantages, have features of internal filling, as well as design developments allow you to expand the range of available models.
The variety of models is distinguished by its peculiarities of the external and internal structure. However, the general advantages are traced in each of the radius-wardrobe model. The strengths are as follows:
The largest minus such models of the wardrobes are considered a high cost. Due to the fact that the design has many complex elements and mechanisms, its assembly and installation may be accompanied by the difficulties of the process. An experienced specialist will solve any puzzles, so the assembly and installation should be entrusted with proven furniture makers. Some craftsmen are solved on independent installation and even the cabinet assembly.
In order for the radial wardrobes-complised by their own hands did not have a non-sustainable external view, you need to try well. For this, it is important to have some skills to properly draw up the personal scheme of the future cabinet and the calculation of the size. The most difficult thing is to calculate the correct radius. It is he who sets the radius of the top guide. Many factories and furniture manufacturing companies are offered to use the service. individual order All components of the cabinet. To do this, the master itself must draw up clear calculations for which furniture makers will be able to make and send all components of the design.
In addition to the "box" - the case of the cabinet, it is important to pay attention to other details and mechanisms. For self-assembly The cabinet from A to Z, the following elements will be needed:
Radius type is a carriage with the top suspension. It serves to move the door of wood or aluminum along the track. This mechanism includes the following details:
The profile for radius cabinets is a radius guide. It is made from aluminum under the order, taking into account the individual radius. Her goal is to provide smooth sliding rollers, attached to the ceiling of the cabinet. Maximum length Radius - 6 meters.
The carriage is made of zinc and aluminum alloy, its composition includes a bearing. For one door, you need two carriages. Purpose of such important details It consists in moving the door on the guide. The carriage has a feature - adjustment in height.
The stopper limits the movement of the door and fixes it in the desired position at a certain place of the track. It is made of a piece of plastic, and attached to the edges of the upper track.
The bottom roller is made of plastic, attached to the podium or on the floor. His goal is that the door does not swing, each door should be installed on one roller.
The first thing to do is to determine the calculation of the radius of the future cabinet. The corresponding size prepare the ceiling and the podium of the future product. The height, width and depth is measured, and the question of the number, size and radius of doors can be solved, which can be made under the order. Cabinet parts can be made of any kind of material: chipboard, MDF, veneer, natural wood.
When calculating, consider the following:
The drawing is performed on the scale of 1:10, and then transferred to the details of the genuine value. On the finished drawing to order the doors of the required radius and sizes are manufactured.
A concave or convex shape of the cabinet affects the shape of shelves and internal filling items. Some shelves can completely repeat the circuit of the cabinet radius. The angular cabinet most often has a "dead" zone in depth. To fill the place and use it rationally, in small closets in the corner itself, there are volumetric things and household appliances, for example, vacuum cleaner. In large cabinets install dressing tables with make-up mirrors or sports rigging equipment.
The location of the wardrobe has a significant impact on the internal filling. For example, in the hallway in the closet there is a bulk outerwear, many pairs of shoes, umbrellas and other things. The wardrobe in the bedroom should provide a place to store underwear and other accessories, as well as large, deep and spacious shelves for bed linen, blankets and pillows. In the hall, the corner cabinet can move in a shaped form. Such a model is combined, it includes closed zone Storage of things and open rack. On the shelves can be stored books, decor and even a TV or music center.
For ergonomic storage of things, it is important to know and adhere to the established standards emanland from the average physique of a person:
The classic option is the radius parts from chipboard or glass, which are attached to the side of the cabinet compartment and the rear wall of the chipboard. But it is possible to easily approach the design of the end of the cabinet. Consider the most interesting options.
Radius shelves are not made to the entire depth of the cabinet, and the rest of the depth of the sides of the cabinet compartment is used for the manufacture of Penal. Pencil allows you to create an additional closed storage area.
It is interesting to design the end of the wardrobe with the use of bent facades from glass and MDF. Moreover, it is possible to combine simultaneously bent and straight elements.
The radius of glass is actively used in the manufacture of the endings of the cabinets of the coupe. You can simply make several radius shelves and with the type of toucan type floor holders to fix immediately to the wall and side wall of the cabinet compartment.
Interesting option It is to make a small chipboard panel, consolidate it to the wall, and the shelves made of glass. We will result in light and original solution Upon registration of the end without significant material costs. By the way, using this reception, you can improve the design of an existing cabinet compartment.
False panel can be made not direct, but radius. It will be more expensive, but visually looks great.
An interesting designer reception when the rear wall of the radius end is made by two-layer, and the contrasting colors of the chipboard are used. Similarly, the roof of the cabinet compartment is made.
Interesting visual effects are obtained using the mirror in the manufacture of the back wall and the radii of the cabinet compartment.
Modern and cool looks backlighting the end glass Shelves End of the cabinet coupe. The clips lamps are usually used, as in the photo below.
The end of the cabinet is made in the so-called "classic" version, that is, the rear wall and radius are made of chipboard. The configuration of the radii and the rear wall can be different, some variations on this topic are given in photos.
Fig. twenty. Direct rear wall end of the cabinet coupe |
Not everyone likes the rounded forms of the outer part of the cabinet compartment. In this case, the end of the cabinet coupe is performed in the form of rectangular shelves, elements of cabinet furniture.
Sometimes the wardrobe does not remain "lonely" and is complemented by elements of cabinet furniture. As a result, a whole furniture composition is created and functionality is improved in terms of creating storage sites.
When buying furniture directly from the factory there are two ways of delivery:
The cost of delivery of the transport company is paid upon receipt of furniture.
When ordering furniture from the factory, the assembly services are provided only in Penza and the Penza region. Residents of other regions recommend contacting a specialized organization in your city.
Each element of furniture is equipped detailed instructions Assembly. In case of issues, contact our phone or skype managers.
When buying glass showcases directly from the factory there are two ways of delivery:
In the photo - packaging of bent and straight winds that allow you to deliver shopcases in the destination.
Packing bent and straight glass
When buying a bedroom furniture Galant and Prima directly from the factory there are two ways of delivery:
When buying furniture for the kitchen directly from the factory there are two ways of delivery:
In the photo - Penal Packed and Kitchen Tumes, which allow you to deliver to you Furniture safe.
Penal Packaging Stage
Penal packaging
Starting stage of packing of the cabinet
Packing Tube