Many where it writes how to glue wallpaper on the walls or on the ceiling, but how to attach the arch with wallpaper, where you can find. Therefore, I decided to tell you in this article, how to do it. There are several methods as you can save the arch by wallpaper. We will talk about these all methods now.
That's how our scheme shook wallpapers on the arch will look like. Glue wallpapers on the wall so that they enter the arched opening.
Immediately without waiting for the drying of the wallpaper, cut off the web with the back side so that it goes to the arched opening by about 5 cm. Next, we glue another cloth and cut it off and so until it is planted around the entire arch.
After that, on the canvas that enters the arched opening, we make a lot of cuts by mounting knife or scissors. And bend the edges to the inside of the arch. But in order to glit better, apply the brush again wallpaper glue on the canvas.
After that, we glue the wallpaper on the inside of the arch. For this, the cloth is cut on 10 cm wider and longer than it should be. After sticking, you cut off too much.
This method has two large drawbacks. One of them is that the canvas that is glued to the inner side of the arch will constantly break down. It will not be discarded because he wants so much, but because the edges of the canvas will constantly hurt.
Another disadvantage is that when the cloth falls on the second, the convexity is formed. Many do not pay attention to it, but there are people who want them to be like that. Then, in this case, read how to attach the arch in any way.
The second method is to trim the wallpaper on the corners of the arch so that an arched paint corner can be seen. This is an area that is glued to the arc in the process of shtcloth. Here is a photo:
In this method, you must first glue the wallpaper on the inner surface of the arch and cut up too much. Then glued canvas on external part Arches, and again is cut off too much.
It is necessary to cut off without a stock, and so that the canvas repeated the exact shape of the arch. To the arched corner it is better seen, it is necessary to sand the edges of the wallpaper. And that's what you should get:
It is also not a bad method to wake up the arch with wallpaper, but it is rarely used. After that, the white angle can be painted in any color.
Now I will tell you about the most simple and reliable method of pasting arch with wallpaper. It is to punish the wallpaper on the inside of the arch and cut off the excess. And glue the wallpaper on the outside of the arch. Then this is not very beautiful corner A plastic flexible arched corner is glued. This is not the one that goes under putty, but special. It can be bought in many large construction stores.
Thus, in you the angle of the arch will look good, and you will protect the wallpaper from mechanical damage. Corners will not be damaged and disconnected. And you will greatly simplify your work.
All of these methods of pasting Arches wallpaper have their drawbacks and advantages. How to finish your arc to solve only you.
If there is an arched opening in your apartment or house, then he probably becomes the center of attention for those who first visit your home. But when conducting cosmetic repair The arch can become a place to separate which is quite difficult. For this, wallpaper is usually used, but even with such a simple material, it is not easy to achieve a decent result.
Before placing the arch with wallpaper, you must choose a finishing material. It is necessary to come to this question seriously, because the arched form makes it impossible to dock the pattern on the side and facade sides. If you want to separate the entire arch of the same wallpaper, then they must be monophonic or have an abstract small drawing that does not provide for the need for combination.
Wallpaper selection will be simplified if the inner surface you cross the color-compatible canvas. This part of the wall can also be covered with paint. At the same time, there may be absolutely any pattern on the main wall, but the inner surface is made in monophonic.
If you think about how to attach the arch with wallpaper, you should also pay attention to the companions, which have a different pattern, but a common background. This solution will become ideal for arched openings. Outdoor wall In this case, can be caught with a pattern with a pattern, while the opening can be covered with monophonic or striped wallpaper. This will create a stylish contrast.
For the arch, photo wallpapers are often used. But the price of such a repair may be quite high, because the wallpaper is made to order taking into account the size of the arch. You should not go around the attention and quality of finishing. If the opening has the form of the arch, this zone will be loaded during operation. The coating should be resistant to mechanical effects, tolerate the sink, because it will constantly drop when walking.
In this regard, you will have to periodically wash the walls in this zone. For this reason, paper canvases cannot be here better decision. A much more favorable option will become glass windows, bamboo, fliesline or vinyl cloths, which are wiping or washing with sponge and weak soap solution.
Before placing the arch by wallpaper, you must prepare tools and materials, among them should be allocated:
Work begin with the preparation of glue. It should be done somewhat more dense than in the case of wall decoration. This is necessary in order to ensure slow drying. The more thick consistency will also also move the wall strips by achieving the matching pattern, if necessary.
Step 1. After the walls are prepared, it is necessary to enjoy laying sheets. It is necessary to do this so that the whole last cloth is located in front of the arch from the opening of 25 cm. Next, the following canvas is glued. It should not be painted in the form of the opening in advance. Pretty unlikely is the assumption that you can calculate everything for sure. It may take a lot of time.
Step 2. With the help of sharp scissors, you must cut off part of the web, which goes beyond the opening. However, it should not be done along the contour. It is necessary to retreat about 2.5 cm. If you are interested in the question of how to attach the arch with wallpaper, then you need to know that at the next stage of the retirement every 3 cm it is necessary to make cuts that will be perpendicular to the opening lines. These tongues wock inside and glued to the inside of the arch. By the same principle, it is necessary to act with the second party.
Step 3. For the standard there will be enough about 3 canvases. It is important to measure the depth of the opening, namely the width of the inside. You must define the length of the arch from the bottom point to the opposite side. On this size, a strip of the desired length is cut, and its width must be less than several millimeters. If the arch has an impressive length, the inner surface must be saved by two bands that will converge at the top point.
The strip is labeled with glue and attached from below-up around the opening. Quite often, novice home masters think about how to attach the arch with wallpaper in the apartment. At the same time, you must take into account that it will be difficult to get inside the edge of the textured canvases. Therefore, the material must be selected rather thin and durable.
One of the popular options for finishing the arch is paint. Here you can show fantasy and draw a unique ornament, inscription or drawing. You must prepare brushes and do not forget that the artist's skills is not the last thing in this matter. If you do not have the appropriate gift, it is better to use the help of a specialist.
Thinking about the question of how to separate and decorate the arc from drywall, you must consider that this option Finishes may be pretty expensive. In addition, the resulting coating can be easily corrupted by children or pets. Excellent solution Even I. decorative plaster. But at the same time, it should be combined with the design room, so that the arch does not stand out too much, otherwise the feeling will be a feeling that the opening was borrowed from another apartment. One of the disadvantages of such a solution is a tendency to the appearance of cracks and fragility. And otherwise this material is very good, it is not too expensive, it is durable and comes to almost all interior styles.
You can apply also decorative rock. It can be strengthened on any surface with the help of construction glue. But the working material should not provide for use natural stoneSince it has an impressive weight. One of the shortcomings may be the complexity of installation, because the masonry takes a lot of time and effort. It looks great in the opening of the mosaic. It is unpretentious and practical, and also suitable for wet rooms.
If you want to know how to attach the arch with your own hands, then for starters should ask the surface preparation technology. For this purpose, decorative or leveling corners are usually used. The latter are mounted under the plaster fixed with glue or with self-tapping screws. As for decorative corners, they are installed after finishing.
Before starting the surface, it is necessary to clean the base from dust and coat the arc base plaster. While it will dry, you should fix the corner, processing its inner side by glue. If you use the steel product, it is installed on the screws, because the weight of such a decor is more. After that, the surface is processed by another layer of putty. As soon as the solution is dry, work can be continued.
If you are among those who wondered how to properly attach the arch by wallpaper, you should know that the work should be started from the window. It is important to calculate the number of sheets so that about 25 cm of the neokened space remains before the arch. Next, the remaining area and a piece of wallpapers are treated with glue and allow materials to be soaked for 15 minutes.
If you decide to use paper wallpapers, you may notice that after their gluing the material began to frown. It is not necessary to be afraid of this, with time the canvas will be collapsed. If you solve the question of how to glue the arch during repair, you should know that it is impossible to rub the phlizelin canvas. For their best fastening On the surface should be carried out with a roller.
The edges should be reused with glue and remove the excess mixture so that after drying, white spots are not formed on the surface. If you wish, you can handle the arch decorative cornerBut he is chosen in tone to the wallpaper.
If you decide to purchase plastic products, you can glue them to PVA glue. When cooking glue, it is stirred with a mixer drill. In this case, the mass is homogeneous and does not have lumps. After that, the adhesive is left for 5 minutes for ripening. After you stir it again, it will be ready for use.
Now you know how to glue the arch in the apartment correctly. But there are some more nuances. For example, a smaller amount of water is added to dry composition when the glue is added than the manufacturer on the package. This will make it possible to get a more dense consistency, which dries longer. At the same time, the web is easy to move along the plane of the arch, and you get a more reliable gluing sheets.
The arch must be predetermined for cracks and irregularities. After that, it is covered with plaster. As soon as the layer is dry, it is necessary to put a putty. With this approach, the surface is perfectly smooth, suitable for sticking wallpaper.
Among the most popular elements of the opening of openings should be noted an arched corner. The protective element, which at the same time performs the function of the decoration is manufactured in two types: metal and plastic.
The installation is not difficult, but it has the features that a person performs the work with his own hands should know. So let's look at how the arches are performed plastic corner.
Finishing corner for many years is used to simplify repair work. It allows you to form corners, as well as protect the doorway. The main advantage of arched corners is the ability to extend the service life of the finish, as with them and wallpapers will not break into the corners, and the paint will not erase.
And if in the process of installing the interroom arch, the plastering angle from chipboard or drywall is required, the aluminum corner will allow you to withdraw 90 degrees. Any home angle is exposed to external influence, especially for arched openings - rearrangement of furniture or ordinary Saturday cleaning can damage it. The solution is - glue a decorative corner.
Important! Perforated corner displays a smooth face for curvilinear design. The consumption of putty decreases.
Thanks to the perforation, the corner can be framed not only clear lines, it can be bent and removed various forms. The soft curved element provides the ability to issue not only square or rounded arches in classic style, but also to remove the seven kits, as well as openings with non-standard bends. Corners for arches are distinguished by such advantages:
Plastic corner for interroom arch need to be properly fixed. To do this, a list of such tools is prepared in advance:
Important! Stick the decor using liquid nails simply, but risky. First, plastic may be damaged, and secondly, a large amount of material used leaves fat traces on the finish.
Attach a curved corner is best with the help of mounting glue or liquid nails, as the installation with metal carnations or self-tapping screws looks ridiculous, and also increases the chances of the appearance of cracks and chips.
Plasterboard refers to the most common materials for creating interroom portals. It is lightweight, attached to the frame and makes it possible to display the inner and outer radius angle. Since the material requires subsequent cladding, angle is used for ease of design. Glue for laying - putty.
Any apartment will look much more spectacular if there is an edging of the existing arches with plastic corners. Therefore, let's look at how to glue a plastic corner to the interior arch and make the framing durable and reliable.
There are two need to use PVC items: stick and remove a straight angle or caress arc. Condition for registration of straight corners:
A flexible corner for the arcuate arch is fixed a little different way. Photos and video will help newcomers to figure out the differences and installation features. Alone to make installation such an element will not be harder than the previous version, but pay attention to such nuances:
Important! Apply a home or construction hairdryer to accelerate drying is prohibited, especially if wallpapers or paint are used for walls.
Corners for interroom Arch On the wallpaper glued simply. The finishing material is rapidly grasped with glue and allows you to experience yourself for strength the next day. But if you wanted to puncture the arch corner from MDF, then use such tips:
Wooden corner is better used for arched openings from the same material. It is difficult to bend it, so you can go to the straight plane. Perfect use - rectangular portals, where there is no round element.
Interesting! Among the abundance of finishing elements, you can choose a cork, rubberized, rubber corner. Rolled and flexible rubber corner is simply necessary in places where water, falling on the surface makes it slippery. Such can be glued to the tile and concrete if there is a need.
The arches are also allowed using conventional plastic corners, but in this case the elastic threshold will be much smaller. So that without damage to the product to bring it to desired size, It is necessary to heat the material with a construction hairdryer.
For decorative design, the arches and walls are used polyurethane and polyurethane foam - in this case, all surfaces must be even. If there are small drops, it is necessary to glue the items gently pressing and increasing the amount of glue in these places.
" After all, the repair is a complex emotional event that many "stretch" for several years. Recently, more and more families are inserted into the doorway arch. It makes the room more modern, and the interior is more spatial. How to attach an arch by wallpaper in a house or apartment? We will analyze such an important question "on the bones".
Attention
Arched structures are homemade and "factory". At the same time, their advantages and disadvantages are meaningless, since each specific residential owner chooses the arch at will and opportunities.
Draw up a similar design element with:
For example, in classic design best "fit" design, plated wallpaper or case mirror tiles. In Lofte, the arch will be more appropriate to look at the arch, decorated with stucco or finishing material under the tree.
And the style of "Modern" will complement the arched element painted with paint or decorated with wallpaper with a geometric print.
Start glue wallpaper better from the window. If there is no way in the room or it is located far, then the finishing materials are glued to the arc from left to right.
Building stores present several types of moisture resistant and non-fatty wallpaper materials:
To choose rights For the arch, you should not pay attention only to the price of such rolls. After all, color, texture and specifications finishing material is more important (on how to distinguish different types Wall coating and determine what is better, read).
If you do not enter the arch in the existing interior, and the goal is to make an independent design element, it is better to choose materials that are noticeably different in color and texture from previously glued webs.
So that the selected construction and finishing materials are beautifully framed by arched design, it is necessary to think thoughtfully, but also use the correct tool when sticking.
To work with paper, vinyl, textile and exclusive canvases need:
If the arched construction will be issued liquid wallpaper, then you will need:
In advance, it will be necessary to worry about "Tara", in which silk plaster will be divorced.
Arched construction is most often done from drywallBut on sale there are wooden models.
But since wood products usually do not require additional design, we will take the basis of the plasterboard elements of the design.
Why put the plasterboard under the wallpaper and how to make it with your own hands we told in.This is done not so much for aesthetics, how much to align the walls, the preparation of a good "base" for further work.
In addition, if the arch will be shuffled with dense, poorly taking faces, the corners of the design are recommended to cry out the paint in advance, the tone of which completely coincides with the color of the main material. It will help to hide the small "flaws" of the boilers, and make the picture more holistic.
How to go:
It is difficult to give the necessary form to the glued construction and finishing materials, because the web impregnated with glue is rushed when interacting with scissors. therefore first, the adhesive is given to dry, and then cut off excess from wallpaper.
Then the surplus is cut from each wallpaper sheet, but the stock of 2-3 centimeters remains. This allowance throughout the entire length is caught with short, vertical lines, which are separated between themselves with a distance of 4-5 cm.
It is done so that any wallpaper sheets can be easily glued to the inside of the arch.
The next stage is the design of the inside of the arched construction. For this:
Such a strip can be cut into two parts, then docile in the highest part of the arch.
Attention
If the corners are painted in advance, then you can cut the wallpaper fragment exactly in size of the structure, without stock.
There are several important rules that help to quickly and beautifully arrange an arch even one who first took over to stick.
Paper wallpapers are the cheapest option for finishing materials. But for a low price, which is logical, poor quality is hidden.
It is difficult to work with such a construction and finishing material, because it is not glued to "naked" plasterboard. And several times shook the surface first with white paper or newspapers, and then paper stripes are not particularly rational.
Draw up arched construction in doorway, paper wallpaper It is worth if all the neighboring walls are placed in the same coating.
In this case, everything is simple: the brighter and the most original print on the canvas, which are placed on the walls, the calmer should be the so-called domestic wallpaper. This will help visually give the depth of the arched design, create a beautiful color transition.
As companyon wallpaper, coatings are usually treated, the shade of which is in one color spectrum with the main wallpaper.
In order for such a difficult thing associated with the design of the arched loyalty, it ended peacefully, you need to distribute the responsibilities on the shore. For example, who sticks, who cuts the roll, who removes the excess glue, etc.
If each of the relatives will only be responsible for their front of work, then it will go faster, and the family atmosphere will remain positive.
Arch, installed in the house or in the apartment, transforms the interior, making it more noble, stylish. However, that this feeling does not disappear immediately after the construction of the design, it is necessary to take into account all the recommendations.
In contact with
The decoration of the arched opening with their own hands is a rather simple and not very laborious process, however there are several nuances such a specific work. Repair specialists give mass useful Soviets How to properly attach the arch with wallpaper so that the result was high-quality and aesthetic.
The procedure is based on verified technology, repeatedly tested by specialists of different levels:
At each stage of the decoration of the Arch, wallpaper will need a certain set of construction tools and materials. It is not recommended to neglect the advice of professionals and be limited to infrident means.
What instruments and materials are needed:
As additional tools for accurate alignment, the level, plumb, laser level may be needed.
You can separate the arch different materialsBut when choosing suitable wallpapers it is better to stop on durable, washable. Suitable for these purposes the following types:
In the process of operation of the room, the opening is always experiencing heavy loads, regardless of the purpose of the rooms, so the surface periodically needs to be wiped with soap solution. The right decision will be a refusal of paper species. It is dictated not only by their low wear resistance - the paper may shrore after the pasting. Typically, the surface is aligned with time, but sometimes it is strongly deformed on bends.
When pasting it is quite difficult to docile drawings, so it is better to choose the wallpaper of monophonic colors or with rare small illustrations.
For decorative finish The premises are very popular today wallpaper-companions - they are well combined with each other, but have a different design. Thus, on the facade of the arch, it is possible to shove wallpaper with any pattern, and the inner part is covered with one-photon, but compatible color.
Other solutions are often found - when, regardless of the texture and colors of the facade, the arch cuts with wallpaper of contrasting or kept in the same color scheme. For example, the arch can be covered with a neutral shade wallpaper or use a contrasting palette, but the color of the arch should be combined with plinths, sockets and switches.
Preparatory work - An integral stage interior decoration in the apartment. Arched opening should be even, not to have large deepening or protrusions on the surface.
Scroll required tools and materials:
Works on the preparation of the surface to decoration begin with an assessment of the state of the arched opening. Special attention is paid to the arch - if it is twisted, has potholes or chips, then it needs to be saved by a special leveling corner. This is a thin and flexible material, usually glued along the entire length of the arch on both sides of the arches. If a metal corner is used, it must be mounted on the tapping screw.
The finish putty can be slightly align the chips of the opening. If you are too large, they should be filled with cement and sand-based composition, and it is necessary to smooth the corners until the mixture is completely drying.
Check how smooth the walls are the walls, you can use a simple plumb or laser level Linear type.
When the edges of the arch are aligned, the entire surface is plastered by the finish plaster - it is necessary in order to hide the fasteners. The next layer is a primer, and it is better to choose a special composition under the pasting with wallpaper - it hides all flashes and stains the facade and the arch in white.
Glue wallpaper should be clean smooth surfaceSo the arch must be cleaned of dust and any contamination. Next prepared glue - it is best to choose in accordance with the type of wallpaper. Experts recommend to knead a thick composition, optimally - to enter 10% less water than indicated on the package. Such a consistency slower dries, does not form lumps and make it possible to customize items more precisely, which is especially important when cutting drawings.
Instructions: how to attach the arch by wallpaper
On this decoration Arch by wallpaper is completed. The presented technology is universal and is suitable for finishing the opening of any type or size. Practice shows that all work is quite simple and fulfilled even in the absence of professional skills. To avoid annoying mistakes, it suffices to comply with the recommendations of specialists and follow the instructions.
