House, design, renovation, decor.  Courtyard and garden.  With your own hands

House, design, renovation, decor. Courtyard and garden. With your own hands

» How to apply liquid wallpaper to the ceiling - the rules for performing work. Features of applying liquid wallpaper to the ceiling Liquid wallpaper for a dark ceiling

How to apply liquid wallpaper to the ceiling - the rules for performing work. Features of applying liquid wallpaper to the ceiling Liquid wallpaper for a dark ceiling

Liquid wallpaper for the ceiling is a versatile material that allows you to create smooth and even surfaces without seams and transitions.

Covering the ceiling with liquid wallpaper

Types of liquid wallpaper

Specifications, appearance finished ceiling and the duration of the service life decorative coating depend on the composition of the material. Liquid wallpapers are:

  • cellulose;
  • cotton;
  • silk;
  • mixed.

Cellulose


Photo of cellulose wallpaper on the ceiling

The main filler is cellulose fiber, therefore given view wallpaper has the shortest lifespan compared to the rest. Another disadvantage of the coating is instability to UV radiation, the wallpaper quickly fade under the influence of sunlight. The advantage of the material is its reasonable price.


Cotton composition of wallpaper

A significant part of the composition (98%) accounts for natural fibers and 2% for adhesive binders. The result is a soft, tactile, environmentally friendly finish that is used to decorate ceilings and walls in bedrooms or children's rooms. An additional plus is the heat and sound insulation of the room.


Silk texture liquid wallpaper

Presented by strong and durable coatings that do not fade in the sun. Often used to decorate the ceiling surface in spacious rooms with sufficient natural light. Thanks to decorative additives, silk wallpapers can reproduce the imitation of fabrics, patterns, marble. The main disadvantage is the high price.

Combined


Using different textures in the living room

Combines the properties of the three previous types. The result is a coating that is not expensive, has high decorative qualities... The price of mixed liquid wallpaper is directly influenced by the percentage of silk or cotton fibers in the dry mixture.

Advantages and disadvantages

Liquid ceilings are used for interior decoration and for other reasons:

  • ease of preparation. To prepare the material for work, you do not have to spend a lot of time and effort. So, when using ordinary roll wallpaper, they need to be measured, docked correctly. Liquid formulations are simply poured with water and wait a little before proceeding with the application;
  • ease of use. The material is applied to the ceiling surface as ordinary plaster or putty. In terms of consistency, the finished formulations are similar to cotton blends. It will be much easier to distribute such a substance than to glue roll cloths;
  • does not require a thorough preparation of the base base. Liquid wallpaper will reliably mask minor flaws and defects in the rough ceiling, as a result, the surface will turn out to be even and smooth;
  • seamless. After finishing, there will be no seams and transitions on the ceiling, while the use of roll wallpaper requires careful adjustment of the joints;
  • liquid wallpaper can be applied to ceilings painted with water-based or oil paint, without removing the previous finish;
  • such compositions are used to repair ceiling surfaces in small rooms, rooms of non-standard sizes and shapes;
  • the material is completely safe for health, made from environmentally friendly components, does not cause allergic reactions, odorless;
  • having finished the ceilings with liquid wallpaper, you do not have to worry if damage is formed somewhere. They are easy to eliminate: it is enough to moisten the defective area with water, remove the previous layer of material, apply a new one;
  • repeated use is another plus in the piggy bank of the advantages of liquid wallpaper. To remove the finish from the ceiling, the coating is moistened abundantly with water, then removed in small pieces, soaked in warm water, mixed and applied again. In this case, dry storage of dismantled wallpaper is allowed for up to 6 months.

Raw material

As for the disadvantages, liquid wallpaper also has disadvantages. These include:

  • their cost is higher compared to paper alternatives. But the service life is 7-10 years, while for most paper counterparts, the operational period is limited to a five-year period;
  • poor colors. However, this disadvantage can be easily compensated for by colored pigments, glitters and other decorative components, with the help of which it will be possible to obtain the desired shade and design;
  • liquid wallpaper is not allowed to be washed. If some area is heavily contaminated, it is removed, and a new layer of the composition is applied to the cleaned area. Due to its low moisture resistance, liquid wallpaper is rarely used to decorate ceilings in bathrooms and kitchens. If the material is used to decorate these rooms, the liquid ceiling is covered with a layer of colorless varnish on top.
  • fresh finish dries for a long time. The drying speed is influenced by humidity and air temperature. On average, the period for complete drying of the composition is 2-4 days. You can speed up the process by using a heater or drafts, leaving windows and doors open.

Interesting information: (step by step guide).


DIY application

The technology for applying material to the ceiling is similar to the process of wall decoration. Before proceeding with the repair, you will need to prepare:

  • capacity for diluting the composition;
  • a spatula for applying diluted wallpaper;
  • rubber or foam roller;
  • a grater made of metal or plastic;
  • spray bottle with water;
  • embossed roller.

Surface preparation before applying liquid wallpaper

Finishing ceilings with liquid wallpaper begins with the preparation of the base base:

  • remove the falling off fragments of the previous finish;
  • if paper wallpaper was glued to the ceiling before, the material is completely removed;
  • deep cracks are filled with putty or covered with liquid wallpaper in the process decorative finishing, but then the repair time and its final cost will increase;
  • a primer is applied to the cleaned surface deep penetration preventing the penetration of moisture deep into the floor, improving the adhesion properties of the decorative material;
  • if there are metal parts on the ceiling, they are covered with PF-enamel or water-dispersion paint to prevent the formation of rust and corrosion;
  • roughen the ceiling base using a primer emulsion with quartz dust or by adding fine sand to the primer.

Selection of color and shades of material

To make the shade of the decorative finish uniform, prepare the composition immediately to cover the entire ceiling surface of the room. But first you need to calculate the amount of material.

Usually, manufacturers indicate a layer thickness of 1-1.5 mm on packaging with a dry mix. A standard package of dry wallpaper, weighing 1 kg, is used for finishing 3-6 m² of the ceiling. If there are defects, cracks or differences in height on the base base, the thickness of the applied layer will be greater, therefore, the material consumption will increase.

To calculate the number of packets of dry mix that you need to buy, divide the area of ​​the room by the minimum area indicated on the package. For example, you want to finish the ceiling in a 25 m² room. Accordingly, we divide 25 by 3 and we get 8.3 packets, round the value up to a higher indicator (9).

On a note! It is not worth saving on repairs and finishing. Immediately purchase material from one batch for the entire ceiling, because even from the same manufacturer, sometimes shades differ in different batches of material.


Mixing process

Before use, liquid wallpaper is prepared as follows:

  • the bags are shaken vigorously to prevent the appearance of lumps;
  • pour the contents of the package into a clean container. One package requires a bucket or bowl with a volume of at least 8 liters. Coloring pigments are also added here to give a shade;
  • add 5 liters to the dry composition pure water temperature 20-30 ° C;
  • the mixture is mixed by hand or with a construction mixer at low speed. If the consistency turns out to be too thick, add water a little at a time, and stir the composition again;
  • lumps are immediately removed from the solution;
  • leave the diluted wallpaper for infusion for 25-30 minutes.

Applying liquid wallpaper to a plasterboard ceiling

Before applying the material to the surface to be finished, check the readiness of the mixture. To do this, cover with diluted wallpaper small area ceiling. The composition must adhere reliably and not fall off. If the mixture is thick, add water and stir again. A substance that is too liquid will have to be given time for excess moisture to evaporate.

The finished mixture is applied to the ceiling with a wide spatula or trowel. The solution is evenly distributed over the surface in a circular motion. For the final leveling, take a spatula, which is used to apply the putty. Before ironing the surface covered with wallpaper, the tool is dipped in clean water.
A paint roller is also used to apply wallpaper. In this case, the mixture is glued to the ceiling in portions, the surface is smoothed with a moistened tool. To obtain a textured relief, embossed rollers are used, but they work with tools after the wallpaper is dry (after 6-7 hours).

When the finish is completed, they check the quality of the work done by highlighting the areas with a lamp at an angle of 45 °. Thus, it will be possible to consider defects and correct shortcomings.


Homemade wallpapers are no worse than purchased ones in terms of decorative properties

If you wish, make such wallpaper yourself. For this:

  • take 40 sheets of A4 paper, cut into small pieces;
  • pour over paper base in a suitable container, pour 1.25 liters of water there;
  • leave for one hour to swell;
  • mix with a construction mixer;
  • add two caps of color suitable color, stir again;
  • pour 40 teaspoons of the gypsum mixture into the resulting composition, pour 200 ml of PVA glue, stir, let the wallpaper sit.

With proper dilution, homemade wallpapers will not be inferior to purchased ones in terms of decorative properties.

Liquid wallpaper will help to make the interior interesting and sophisticated. At the same time, the preparation and application of the composition will not cause difficulties even for a beginner. With the help of this finishing method, it will be possible to reproduce reliefs, ornaments, drawings on the ceiling surface and quickly update the room. The main thing is to carefully study the instructions before work and follow the recommendations.

Related Videos

Also great for decoration. However, the installation of the latter is carried out by specialists. And finishing the ceiling with liquid wallpaper can be done independently. After traditional whitewashing, this is the most economical way to decorate a room. Next, we will learn more about this material... The article will also talk about how to make the ceiling with liquid wallpaper.

What is the reason for the popularity of the material?

What is good about liquid wallpaper on the ceiling? Customer reviews indicate that one of the main advantages of the material is its cost. Despite being economical, the coating looks very original. It is not difficult to apply liquid wallpaper to the ceiling. As the owners of living quarters themselves say, the process of decorating with this material is even easier than with plaster or paint. What other advantages does liquid wallpaper on the ceiling have? Consumer reviews contain information about the environmental friendliness of the material. After all, it contains natural ingredients. These include, in particular, silk and cotton fibers, which are constituent parts pulp and paper base. The composition of the material also includes acrylic components for bonding, adhesives, dyes and special decorative elements.

Application features

The material is usually used for decorating rooms with low humidity. Liquid wallpaper is applied to the ceiling of the kitchen, bedroom, hallway, living room. Surfaces such as drywall, plaster, concrete are suitable for decoration. Liquid wallpaper on the ceiling will perfectly fit after staining. It is not recommended to decorate wood, plastic, metal surfaces, not pre-treated with a primer. Liquid wallpaper on the ceiling can be applied to plain and effect-producing fabrics. If the room is decorated in classic style, the material may look like stucco molding. In this case, the addition of bronze or silver threads allows you to get a very original coating. It will be perfectly combined with fragments of a plain surface. In addition, you can make original drawings on the ceiling with liquid wallpaper. For this, stencils and simple tools will come in handy.

Historical reference

Back in the distant 15th century, Charles VII ordered the restoration of the captured castle. Only three days were allotted for decoration. Silk was produced in the city where this castle was located. However, due to hostilities, all equipment was destroyed and further manufacture became impossible. The craftsmen decided to use the remaining silk in decoration. The webs were crushed and flour was added as a binder. The resulting mass was mixed well and diluted with water. This mixture was used to decorate the entire castle. The originality of the solution and the beauty of the decor amazed Charles VII. There was no one indifferent to such decoration, but knowledge and technology remained. This is how the original textile coating began its existence, which subsequently received wide use in Europe. It should be noted that, for example, in Moscow the Bolshoi Theater is decorated with liquid wallpaper.

Some material properties

Liquid wallpaper got its name due to the manufacturing method. In the factory, the produced material is packed dry in bags. Before application, liquid wallpaper is diluted with water. Laying is carried out according to the technology used decorative plaster... Because of this, the material is considered one of the varieties of this coating. Liquid wallpaper for the ceiling is a great way to economically decorate the surface. The plane looks smooth and solid, without joints or seams. Decorative silk plaster is considered a material with no expiration date. The coverage period is more than 10 years. If any area has been damaged, then it can be easily restored. The place of repair will be almost invisible. Surfaces that are most often exposed to dirt can be additionally treated with a colorless aqualak. This will reliably protect liquid wallpaper. Ceiling application can be done by one person without additional assistance. The material is odorless. The elasticity of the coating protects against cracks when the house shrinks. This is especially true in new buildings. If, nevertheless, gaps appear on the surface, then it is enough to moisten the area (preferably from a spray bottle) with water, and then smooth out the damaged area. You can preserve the uniformity of the pattern using wallpaper of the same batch and batch.

Instruments

For work you will need:

  • The container in which the material will swell.
  • Spatula or trowel. This tool will directly lay the material. You can make a trowel yourself. This requires a piece of plexiglass. An equilateral triangle is cut out of it, the side length of which is 5-6 cm. A handle is screwed to the plexiglass.
  • Rubber or foam roller.
  • Plastic graters.
  • Spray.
  • Embossed roller.

The number of wallpapers is calculated in accordance with the recommendations on the package. As a rule, one package weighing 1.7 kg is enough for 5 m 2. In this case, the layer thickness will be 1.5 mm.

Surface preparation

Before laying liquid wallpaper on the ceiling, cover nonwoven fabric or polyethylene furniture and flooring in the room. It is advisable to free the room from all objects altogether so that they do not interfere with the work. The old coating must be removed from the ceiling surface. Whitewash, tiles, if any, are removed. Liquid wallpaper can be applied to a surface previously painted with oil or water-dispersion compositions. First, you should clean off the existing exfoliating areas. If there are large cracks, they should be repaired with a filler and smoothed out with a float.

Primer composition

Before laying the material, the surface is covered with a special mixture. If the ceiling has previously been painted with a bright oil paint, the color may be noticeable using a regular primer. In this regard, a special composition (waterproof) should be used. In this case, the process of coating with a primer itself must be carried out in two layers. Plastic surfaces must be treated with compositions based on water-dispersive components (PVA glue in particular). Oil paint or metal elements are primed with enamel. This treatment will prevent the formation of rust. Do not apply ST-17 primer. This compound can cause yellow spots. After applying the primer, it is allowed to dry. Only after that they begin to lay liquid wallpaper. Ceiling application is carried out at normal room temperature and humidity.

Preparation of material for laying

For diluting liquid wallpaper, it is best to use a plastic container. The dry mixture is poured into warm water in small portions. Its temperature should be about 25 degrees. If it is necessary to give a shade to the coating, a dye is also added to the container. The mass is mixed until the consistency of thick sour cream. After that, the solution is left to swell. The infusion time is usually indicated on the package. Before laying, the mass is thoroughly mixed again. For uniformity of shade, it is recommended to combine material from different packages. There are also ready-made mixtures on sale. They are for those who have never done decoration in this way and who doubt their abilities. If there is residue after application of the material, it can be closed tightly with a lid and stored for several months.

Types of material stacking

There are two ways to apply liquid wallpaper: manual and mechanical. Briefly, the first method is to throw the mortar onto the surface and then level it with a trowel, float or roller. Professionals often use a spray gun in their work. This method also smoothes the mixture. Textured finishing can be done using a relief roller, and the usual one - with a tool with a hard fur coat. The pattern is rolled seven hours after the coating is laid. Next, we will consider in more detail the methods of applying liquid wallpaper.

Laying by hand

  • A small part of the swollen mass should be taken from the container and applied to the ceiling. Spread the layer evenly. Its thickness is 1-4 mm.
  • The surface is leveled with a smooth float. After that, the next portion of the material is applied. In this case, it is necessary to ensure that the boundaries between the sections are not visible.
  • Depending on the direction of smoothing, the position of the fibers will be formed. When changing the trajectory of movement, you can achieve the desired decorative effect.
  • During the day after laying the material, the adhesive composition will polymerize. In this regard, the coating should not be subjected to mechanical stress.

Mechanical stacking of material

Work is carried out using a spray bottle. Professionals also use a compressor with a working pressure of 0.5 MPa. The capacity of the unit must be more than 400 l / min. In a spray gun, the nozzle should have a diameter of 5 to 10 mm. The size will depend on the texture of the coating. Coating flow is controlled by changing the amount of water added to the mixture. With a spray gun, first apply a layer of 1.5 mm on the entire surface of the ceiling. After it dries, the material is sprayed again. This gives the coating the required thickness. If you spray with one thick layer at once, then the material is likely to slide off the surface.

Finally

The ceiling covered with liquid wallpaper looks original and aesthetically pleasing. The material is fireproof, perfectly tolerates temperature extremes. The mixture contains antifungal components that prevent mold from forming when the humidity in the room rises. Another undoubted advantage of the material is that it does not fade from prolonged use. All components are hypoallergenic. Therefore, people with allergies do not need to worry about their health. You can work with the material without protective equipment (bare hands without gloves). There is no dirt and dust after installation. This allows the occupants of the house to stay indoors throughout the entire process. Liquid wallpaper is considered a versatile material. With their help, you can decorate a room in a variety of styles. When laying, there is no need to additionally press the material against the base for a tighter fixation. It is enough to smooth out the composition with the available tools. The rest of the material can be used at least 4 times. Liquid wallpaper can act as additional noise and heat insulation of the room. This is achieved due to the fibrous composition of the material. After drying, during the entire period of operation, dust does not accumulate on the coating. In addition, liquid wallpaper has anti-static properties. The surface covered with the material does not require special care. It is enough to carry out regular wet cleaning. Vacuuming can be used to keep the coating clean.

Rich color palette makes it possible to implement any design idea, as well as your ideas.

White

Visually enlarges the space and makes the ceiling higher. Versatile and suitable for different styles interiors, improves room illumination and does not cause irritation. A great alternative to whitewashing, as this option is much simpler and cleaner.

Beige

The most natural and natural, like the color of skin or sand on the beach. Although beige will not become a bright detail, it will certainly act as a noble background for any experiments. All the charm of such a coating is in its perfect combination with almost any color, both bright and pastel.

Green

Green looks especially beautiful in the interior and even if such a solution is rare, this is a great opportunity to create a unique uniqueness of the room.

In the photo, the ceiling is made with liquid green wallpaper.

Gray

This is a classic shade. An excellent choice for a calm and unobtrusive design. Gray will breathe stability and harmony into the room.

Blue

They bring sea freshness to the room, making it spacious and bright. Blue will give you the feeling of an endless sky above your head.

Pictured is a living room with blue liquid wallpaper on the ceiling.

Photo ideas in the interior of rooms

Liquid wallpaper can be used to decorate any room in an apartment by making repairs with your own hands or by contacting professionals.

On the kitchen

This coverage fits here in all respects. After all, it is resistant to evaporation of moisture and steam, and also retains sound and heat. This material is non-flammable, does not absorb odors and is not toxic, which is important for the kitchen.

In the living room

It is interesting to take silk wallpapers as a basis, they will bring a touch of luxury to the living room with their softness. The area around the chandelier can be played with a different color or patterned to create a bright accent.

In the photo there is a living room with liquid wallpaper on the walls and ceiling.

In bathroom

The interior will immediately change, even if there is ordinary tiles on the floor. If you properly coat the dried base with varnish, it will allow you to make the ceiling waterproof.

In the toilet

Even in this small room it is possible to come up with a large number of design options. If you correctly combine liquid wallpaper with flooring, plumbing and light, you can create a stylish interior.

In the bedroom

In this room you can rest your body and soul. Liquid wallpaper is perfect for this room, as it is hypoallergenic and does not collect dust. And let this ceiling not become a strong departure from the rules and will make the usual more modern.

Pictured is a bedroom with liquid wallpaper.

Design examples

Possessing imagination and invention, you can successfully add bright and interesting accents to the interior.

Drawings and patterns

The pattern can express the character of the room. Favorite cartoon characters or animals will fit into the child's room. For a discreet living room, this can be a geometric composition. The bedroom will be complemented by delicate flower drawings or stars in the night sky.

With sequins

They will give the ceiling covering an even greater effect and so that the decoration of the apartment turns out to be original.

Combination of several colors

Allows you to create not only simple compositions, but also whole pictures. Visually enlarges the space and pushes the ceiling as if lifting it up. Using shades of color, you can apply a mosaic pattern to individual areas of the surface.

In the photo there is a bedroom with a combination of several colors on the ceiling.

Glowing

In the dark, they emit soft light, creating a cozy atmosphere. This unusual decoration of the room will become its real highlight.

Pictured is a bedroom with glowing liquid wallpaper on the ceiling.

With rusty

They can be wide or thin, colorless or colored. All this together will create the effect of a cracked ceiling. Relevant in the style of shabby chic or shabby chic.

How to apply to the ceiling?

Many attribute liquid wallpaper to the category of exotic finishing materials... However, they are great for finishing ceilings.

What is the best way to apply?

For application, it is best to use tools such as a spatula, rollers, a brush and a drill with pads.

Ceiling preparation

Liquid wallpaper is compatible with drywall, fiberboard, concrete, wood, plaster, plywood, paint and even metal. First you need to get rid of the old ceiling covering. Use a spatula to remove loose material and clean damaged areas. Cracks and crevices must be covered with putty. To firmly fasten the layer of liquid wallpaper, the ceiling must first be primed. And only after that you should proceed to the next stage.

Step-by-step application instructions

Applying the ready-made mixture to the ceiling will provide a continuous coverage without seams and joints.


Video

Photo gallery

New trends in construction and renovation never stand still, more and more interesting and unusual materials are being created every day. This type of design has become a new and uncomplicated procedure that anyone can handle.

December 12, 2016
Specialization: master in the construction of plasterboard structures, finishing works and styling floor coverings... Installation of door and window blocks, decoration of facades, installation of electrical, plumbing and heating - I can give detailed advice on all types of work.

In this review, we will figure out whether it is possible to apply liquid wallpaper to the ceiling, and what nuances must be taken into account when carrying out work. You do not need to hire specialists and pay significant sums. It is enough to read the article and perform simple recommendations to get a good result.

Description of the workflow

In order for any person to easily understand the technology, the process is divided into 3 main parts:

  • Ceiling preparation;
  • Preparation of the composition;
  • Surface application.

Each of the stages will be described in detail below. You need to perform in order simple actions... No special skills or equipment are needed.

Stage 1 - preparation

Without proper preparation, liquid wallpaper cannot be applied. This part of the work consists of the following actions:

  • If there is an old coating on the ceiling, then it should be removed. Old wallpaper is soaked and peeled off, whitewash is removed with a scraper. If the surface was painted with a water-based emulsion, and it holds well, then it is not necessary to remove the composition;

  • If there are foci of mold on the ceiling, it is imperative to treat all foci with an antiseptic solution. The composition must be applied 2-3 times so that it penetrates as deeply as possible and kills the fungus not only outside, but also inside the materials;
  • The surface is inspected to determine if it is damaged or cracked. If some areas of the plaster and putty are cracked, then they should be removed. All problem areas are sealed with putty, it is applied so that the plane is flat;

  • If there is no noticeable damage on the surface, it still needs to be checked with a rule or level. If the plane is uneven, then it must be completely leveled;

Small scratches and damages are allowed on the surface. All minor irregularities are eliminated with liquid wallpaper without any problems. The main thing is to eliminate large irregularities.

  • To strengthen the surface and improve the adhesion of the decorative coating, a deep penetration primer is used. The composition is prepared as recommended by the instructions, after which it is applied with a roller or brush. Processing is carried out in 2 layers, if the base absorbs strongly, then it is better to apply even 3 layers. In places of abutment to the walls, a brush is used for application;

If the ceiling is dark, then in order to prevent the base from showing through from under the coating, I recommend using paint instead of one layer of primer. And you can initially purchase a composition with a coloring pigment to make the surface light.

Very often, several types of liquid wallpaper are used on the ceiling. You can make a frame around the perimeter, or you can create a real picture. Ceiling preparation in this case includes one more type of work:

  • Decide what the ceiling will look like in the end. It is better to draw an approximate sketch of the decorative coating on paper;
  • Measurements are taken on the surface to apply primary marks. If the lines are straight, then a level or a chopping line can be used to outline. The circles are drawn with a pencil with a thread of the required length. Paintings and compositions are drawn either by hand or according to previously prepared templates.

Stage 2 - preparation of liquid wallpaper

Those who prepare the squad for the first time very often make serious mistakes. As a result, the quality of the mixture decreases and the appearance deteriorates. To avoid this, follow these simple guidelines:

  • A container is used for work suitable size... You can mix several packages at once, the main thing is that the container capacity allows you to do this. We will stir the mass by hand, if you do not want to get your hands dirty, get rubber gloves;

Never interfere with liquid wallpaper with a mixer or other electrical appliances. This degrades the quality of the composition.

  • Carefully read the instructions from the manufacturer, it is always on the label. More often than not, there is even a diagram that shows the workflow step by step. The main thing is to clarify the required amount of water for one package of dry mass;

  • First of all, you need to pour the required amount of water into the container. The temperature of the liquid should be at room temperature, do not take hot or cold water, it can ruin the liquid wallpaper;
  • The contents of the bag are gently poured into the container. Stirring begins, the work is done manually, gently crush all the lumps so that the water soaks the entire composition evenly;

If you add decorative components (glitter, etc.) to the composition, then they need to be poured into the water first. So they are evenly distributed throughout the mass.

  • If you need to prepare a lot of composition, but there is no large capacity, then you can mix the wallpaper in several buckets. After they are prepared, the mass is mixed to avoid color differences. You can even do this on a piece of polyethylene;
  • Most often, liquid wallpaper should be infused for 12 hours. But there are more modern options which are ready for use within 1-2 hours after mixing;
  • The finished mass is mixed well again, after which you can start working.

Stage 3 - application process

To carry out work with your own hands, you need a simple set of tools.

The work is carried out in the following order:

  • First of all, you need to check whether the composition fits well on the surface. Liquid wallpaper for the ceiling should adhere well, if they fall off, it means that there is too little water in the mixture and you need to add it to make the mass more plastic. If there is too much water, then it is worth leaving the composition for half a day or a day so that the excess moisture evaporates;
  • In order not to stain the walls and other elements on the ceiling, you need to close all the joints with masking tape. Before gluing it, do not forget to wipe the surface from dust;
  • If there are protruding structures on the ceiling, then first of all you need to trim them. The composition is applied to the surface with a float and spread over it in a layer of 2 to 4 mm. It is important to close all areas so that the base does not shine through, after which all excess is carefully removed;

  • The composition is applied to the ceiling from any site convenient for you. First spread in a thick layer. Then the mass is stretched over the surface so that the layer is uniform. Do not press the float too hard so as not to deform the fibers and not to squeeze them, the coating should have;

  • An area of ​​about a square meter is checked by light. If there are no significant irregularities on the plane, work continues. If there are irregularities, then they are immediately eliminated by adding the mixture or removing its excess;
  • If two or more colors are used on the surface or a drawing is made, then the work is carried out in several stages. First, the main background is applied, after it dries, a different color is used, and so on.

If you do not have time to use up the entire mass at one time, then it should be placed in a plastic bag. It is tied, and the composition maintains optimal moisture, it can be used the next day.

Drying of the composition takes about a day, at this time you can open the windows, drafts are not terrible for this type of coating.