House, design, repair, decor. Yard and garden. Do it yourself

When finishing the ceilings today are increasingly in demand unexpected and original solutions. One of these examples can be a mirror ceiling that can visually expand the space.

Glass classic plates on the ceiling are glued or fastened with special self-drawing.

Make a mirror ceiling with your own hands is not so difficult, as it may seem, there are many installation options. These are unusual, but beautiful rhe ceilings, hanging plates and mirror tiles that are glued or on the entire surface of the ceiling, or only on its selected part.

Options for mirror ceilings

Make a mirror ceiling with your own hands possible. There are several options:

The darker the glossy film, the stronger the "Mirror" effect is manifested.

1. Can be applied stretch materials. A special PVC film is used, it has a high effect of reflection. Such materials can be used for any room, the installation is performed exactly as for any other stretch ceiling. You can make beautiful multi-level structures with cornice backlight.
2. Polystyrene products on adhesive basis. This rolled or slab material is based on polystyrene. Outside it is covered with a polyethylene special film. This option is not recommended for wet premises. In addition, the material can not be heated.
3. Rush ceilings in the form of plastic or metal plates with a mirror surface. Usually it is a narrow long panel.
4. Glass classic plates that can take different shape and color. On the surface glued or fastened with special self-draws.

Preparatory work

Calculation of the mirror ceiling.

To make a mirror ceiling with your own hands, you must first prepare the surface to work, select material for mounting.

Preparatory work:

1. First, it is required to correctly calculate the amount of material. It all depends on the shape of the tiles, the area to which they will be glued. It is first necessary to make a diagram demonstrating the location of individual tiles, taking into account their shape. So it will be much easier to calculate the area, given the position of the material on the surface of the ceiling and the size, the form of each element. First you need to find out the area of \u200b\u200beach tile, then the entire surface that will be swollen. Dividing the total area to the value of each tile, you can get a quantity. If the entire surface of the ceiling is seven, then it is necessary to leave about 5-10% on the climb. The amount of glue is calculated depending on the flow rate.
2. After you need to prepare the surface of the ceiling to work. It should be smooth and smooth, whitewash or paint should be carefully removed. Then the plane carefully examines if there is a need, then all defects are eliminated. Stucco applies for alignment. If the irregularities are strong, then it is necessary to use drywall. If the mirror ceiling is used in the kitchen or in the bathroom, you need to purchase the surface-resistant drywall surface to align the surface.
3. The plane should be treated with a special primer, it must dry in front of the trim.

Article on the topic: Decor of your home for the day of all lovers

Installation of a mirror tiled ceiling

The mirror ceiling can be made in various ways, but the simplest is the method of gluing tiles to the ceiling.

1. You can use only special glue, which allows you to quickly and easily perform work.
2. You can mount tiles using special self-tapping screws whose heads have a decorative surface, i.e. They become on themselves a means of registration.

The embodiment is used most often, but it is only suitable for smooth surface. Special experience is not required, you only need to prepare the plane. The installation process is as follows:

1. The surface is necessarily processed by the primer, which has already been said, its layer must be completely dry before the tile will be glued.
2. The glue with the spatula is applied to the surface, the layer should not be too thick or thin. The glue after applying should lightly dry up to improve adhesion.
3. Next, the spatula must be adopted glue around the perimeter of each mirror tile. When installing it, it must be tightly pressed to the plane section with glue.

All connections must be performed high quality, each element must be glued firmly and securely.

Otherwise, a beautiful mirror surface will begin to disappear. Work is best in gloves so as not to leave traces from the fingers. Press each element of the coating is needed by a rubber special roller.

For work, we need certain materials and tools:

• mirror tile of necessary shape and sizes;
• glue for tile;
• building level;
• set of metal spatulas;
• putty;
• start and finishing primer;
• rubber roller;
• protective gloves.

Molding Mirror Tile Methods

Mounting scheme of mirror plates.

Molding with self-drawers is different from gluing, if necessary, you can remove any tile and replace if it is damaged. This method is used if it is not possible to level the surface or it is necessary to place the ceiling space as quickly as possible. However, with significant differences, this method is not recommended, the surface is best prepared.

The mirror ceiling with her own hands is the original, modern and unique design solution, which will give not only the sophistication and elegance of the whole interior, but also visually expand the space, and also double the height of the room.

Types of mirror ceilings

Installation of the ceiling

• Mirror polystyrene glue plates. These plates are made by rolls and have a size of 2612x1000x1 mm. To the question of many consumers: how to make a mirror ceiling with such plates? To do this, describe below the installation technology.
• Mirror stretch ceilings. In such a ceiling, a polyvinyl chloride film is often used to obtain a mirror effect. It certainly has good reflective properties (as glossy), but still the effect is slightly different than the mirrors. Therefore, reflections are quite blurred. On the other hand, such a ceiling gives an excellent expansion of space.
• Mirror suspended ceilings. Most often in such ceilings, the mirrors are used as inserts. At the same time, the size of the tiles can reach from 300 to 1200 mm. The mirror at the request of the customer can be tinted in perfectly any shades, including golden.

There may be mirrors made of polyacrylate or polycarbonate glass. Such ceilings have a significant smaller weight and are more predisposed for installation in private homes and apartments. Methods for fastening such mirrors, smoothly the same as for ordinary ones.

It is also possible to such a ceiling with a rush fastening system. In this case, the ceiling is first mounted with their own hands with metal suspensions, but to them rake. This design is interesting in that the mirror surface acquires dissected appearance, like long mirror seams.

The whole suspension system mounted with your own hands, regardless of which types of glasses in it apply should have an increased margin of safety and high corrosion resistance.

Advantages of mirror ceilings

Mirror ceiling requires knowledge of certain subtleties

• Improved lighting. Mirrors have the property of the display of sun rays. And if the lamps are still installed with their own hands, it creates a feeling of uniformly lit space;
• Significantly expansion of space. Also, the mirror has a property to expand any space;
• Moisture resistance. Due to which, you can use mirror ceilings in rooms with high humidity;
• Aesthetics and pleasant appearance. The mirror itself is in itself performs the function of the decor;
• Ecology. The process does not use any chemicals and additives, do not have properties to accumulate static electricity;
• Variety of use. As you know, mirror ceilings mounted with their own hands can be shared with suspended plasterboard, creating unique designer masterpieces. In addition, the mirror tiles themselves can be decorated with various patterns, which makes them in a unique decorative material.

Disadvantages of mirror ceilings

• Propensity to pollution, as it will be necessary to periodically clean the mirror surface;
• Fragility: It is necessary to avoid severe and acute items on the surface. Otherwise it will break;
• Before mounting, you need to level the ceiling.

After the choice was made, the question arises: how to make a suspended mirror ceiling? Namely, how to make it yourself?

Installation of a mirror ceiling

Mirror ceilings have the ability to expand the room

Before making the installation with your own hands, you need to calculate the number of mirror tiles required for the ceiling. While the process of cutting the mirror is quite time consuming and requires certain knowledge. Therefore, it is important to decide in advance with the number of tiles and entrust the cutting of the mirror of professionals. Or this can be done independently if there are appropriate skills. On how to make a fool mirror ceiling as described below. There are several installation methods: gluing and fixing screws.

Blind

• Before starting the installation, with your own hands, the surface is prepared, since all tiles should be located on the same plane. And often many concrete ceilings, bugriters are not suitable for installation. Therefore, alignment with plywood or moisture-resistant drywall is carried out. Made a suspended ceiling, which in the future and mirror tiles are fixed;
• Next, a neat procedure for gluing to special adhesives for mirrors based on epoxy resin or silicone rubber is carried out;
• The glue is applied crosswise (diagonally diagonally), as well as around the perimeter;
• The tile is tightly pressed to the ceiling. It is important to make sure that it holds well enough and will not fall later on your head. To do this, it is pressed with the effort, and then check. After moving to the next tile.

Fastening on screws

• Required tools: screw screws, drill, screwdriver, stewing staircase, roller on a long handle;
• Also, as in the last version, before the start of installation, the surface is prepared before the installation, since all tiles should be located on the same plane. It is aligned with plywood or moisture-resistant drywall. Made a suspended ceiling, which in the future and mirror tiles are fixed;
• In the corners of the mirror tile, small holes are neatly drilled;
• For screws and dowels, special rubber washers are put on. This is done in order not to damage the surface of the mirror. Next, these screws are fixed by tiles;
• For greater reliability and better fixation, two ways can be combined by adding glue.

Installation of mirror polystyrene plates

Mirror ceiling with caissons

• Before starting installation, the slabs must be aligned, preferably under load. They should also "get used to" to room temperature;
• The stove data is simply simple. For this, on them, on the reverse side there is a special adhesive layer;
• Sometimes these plates are made without an adhesive layer, then they can be glued with PVA glue;
• Mounting this coating can be directly on plaster. And in order not to be air bubbles, it is necessary to use a special rubber roller.

Recommendation: Before buying such a polystyrene cloth, it is important to see it is designed for wet premises or not. Also on the polystyrene canvase does not need to use powerful or halogen lamps in the built-in luminaires, since plastic is often melted.

The appearance of the ceiling is a kind of business card of the home of the house. At the moment there are many options for its design, but the most unusual and spectacular designer move, allowing you to transform any room and give the appearance of the room expressive personality, is the installation of a mirror ceiling. It's no secret that today a large number of construction companies offer their services to decorate the ceiling space, but it is quite realistic to install a mirror ceiling with their own hands. Certain this task is completely able to man having some experience in performing repair work.

• The presence of mirrors on the ceiling automatically transforms the design of the room and gives it an attractive and cozy view.
• The possibility of combining mirror and aluminum coatings contributes to the creation of original and practical design solutions.
• The mirror ceiling increases the space, so its application is very relevant in small rooms.
• A large variety of colors of mirror panels can satisfy the requests of even the most sophisticated beauty connoisseurs.
• The high degree of moisture resistance allows you to install mirror ceilings in rooms with high humidity.
• Thanks to good reflective capabilities, the space of rooms with mirrored ceilings is uniformly illuminated. If in the mirror ceiling competently arrange artificial light sources, then you can create the effect of zoned lighting, which will give the room a romantic and mysterious look, it will advantageously emphasize some details of the interior and hide in the twilight others.
• Installation of the mirror ceiling occurs quite quickly, while the construction trash and dust is practically not formed.
• Care behind the mirror ceiling surface is limited to periodic dry or wet cleaning, which is carried out using a rag and liquid for washing glass.

Methods of their installation

• Stretch mirror ceilings. Polyvinyl chloride canvas are capable of creating the effect of a mirror coating of a ceiling close to natural. The only difference between the mirror stretch ceiling from the present mirror lies in the quality of reflection, which in the mirror polyvinyl chloride canvas is devoid of clarity and has a slightly blurred contours. Stretch ceilings are not recommended independently, because To perform these works, theoretical knowledge, practical experience, professional equipment and skill work on it are required.
• Mirror polystyrene plates. This finishing material in the production process turns into dense rolls, which before assembly work should be aligned.

To straighten the material in three ways:

1. Disseminate the roll in the room and wait until it is aligned independently. In this case, no additional actions are required, but this method requires a sufficiently large amount of time.
2. Split roll, twist it in the opposite direction, give it to lie down in this form 24 hours. After a day, the roll can be promoted again - the material must be fully aligned.
3. Disseminate the roll in the room and put the suitable cargo on its surface, which will often have to completely dissolve the material. This method is recommended to be used in case of extreme lack of free time.

Mounting mirror polystyrene is easy, because on the reverse side of the material there is a self-adhesive surface that provides good adhesion of material with a ceiling. Preliminary preparation of the ceiling is a prerequisite, because On the perfectly flat plane, polystyrene plates look most effectively. The surface of the plane of the inter-storey overlap is processed by a spatula, which allows removing possible irregularities resulting from the processing of the ceiling by the primer mixture.

If an enamel paint was applied to the ceiling, which over time for one or another reasons began to peel, it should be completely read with a spatula or scraper, and only then proceed to the installation of the mirror polystyrene tile. On plasterboard sheets, the plates glue also easily, as well as on the plastered ceiling.

The process of stickers of polystyrene slabs is as follows:

• A protective film is removed from the sticky layer of material.
• The stove is applied to the ceiling by a self-adhesive surface and cuddles to it with force.
• To remove air bubbles, the surface is rolled by a special rubber roller.

Sometimes there is no self-adhesive surface on the material. Then the polystyrene plates are attached to the ceiling with special adhesive mixtures based on PVA.

It should be remembered that the use of a mirror polystyrene ceiling eliminates the installation of powerful artificial light sources that can heat up and deform the finishing material. In premises with high humidity, it is possible to apply only specially intended polystyrene plates that are not afraid of contact with water.

Glass mirror ceilings of classic type. Advantages of using real mirrors:

1. Maximum expansion of the indoor space.
2. High percentage of light efficiency.
3. Resistance to high humidity.
4. The possibility of uniform lighting of the room in case of installation of built-in light sources.
5. Fast installation and lack of construction waste and dust.
6. High aesthetics.

Preliminary work

First of all, it is necessary to decide on the shape (square or rectangle), the size and color of the mirror plates. After that, the required amount of tile is calculated and its cutting is carried out.

It is not recommended to cut a glass mirror tile on their own, because for the qualitative implementation of this work it is necessary to have professional equipment and experience on it. We should not forget that in the tile it is necessary to prepare holes for light sources in advance.

At the next stage, the ceiling is thoroughly aligned. Ideally, it is best to use moisture-resistant plasterboard sheets or moisture-resistant fane. Only on the perfectly smooth ceiling surface a glass mirror ceiling will be able to demonstrate its advantages in full.

Installation process

Mirror glass plates can be mounted to the ceiling with glue or screws.

In the first case, glue must be handled the inner side of the tile. After that it should be pressed to the ceiling and wait until the tile is secluded to the ceiling surface.

In the second case, in each of the four corners of the tile, drill a hole, the diameter of which depends on the size of the self-press. Screwing tips should be equipped with rubber gaskets that will protect the surface of glass plates from chipping and scratches. When preparatory work is completed, you can start mounting plates to the ceiling. To give the surface to an additional charm, after the installation of the screw of the screws is recommended to be hidden with chrome-plated caps.

Working with glass mirrored plates requires marginal caution due to the fact that the glass is very easily damaged from the effects of even minor external loads.

• repair of the bathroom with plastic panels with their own hands.

Photo

Video

This roller is dedicated to the suspended mirror ceiling.

The mirror ceiling will make a spectacular any room. Mount the mirror ceiling is not difficult, and you can make it yourself. However, the decision to install such a ceiling surface should be deliberate, since such coatings are not suitable for each interior. Photo of tensioning mirror ceilings will help to determine the choice. The mirror on the ceiling is the original designer solutionwhich is able to radically convert the interior of the room. It can give a special atmosphere and sophistication.

Mirror ceilings: advantages and disadvantages

These pluses include:

• Mirrors significantly transform the room, making it attractive and cozy.
• You can combine different kinds Material on the ceiling, implementing original designers ideas. For example, mirrors and aluminum structures or wooden slats with glass coatings.
• Such a ceiling visually expands the space, increases its volume and is the optimal solution of the finishing of small rooms.
• A wide range of color shades will delight any connoisseur beauty.
• Increased moisture resistance makes it possible to mount a mirror ceiling in the kitchen or bathroom.
• Good reflectibility contributes to uniform lighting of the room. With a competent placement on the ceiling of lighting, it will be possible to divide the room to the zone.
• The installation of mirror structures is quickly carried out, while practically no garbage or dust.
• They just take care with special cleaning agents for glass, you can wash them or wipe with a wet cloth.

Ceiling with mirrored inserts photo

Despite the weighty advantages, mirror ceilings have disadvantages.

The disadvantages include:

• Chance.
• Fragility.
• High price.

Selecting a mirror coating

You can make a mirror ceiling with your own hands. But before you need to decide on the type of coating. There are several of them:

• Stretch . In this case, the installation is carried out using a special PVC film, a high degree of reflection, which is an alternative to real mirrors. However, such a material does not transmit the natural beauty of the mirror, so it is more suitable for multi-level designs with backlit cornices.

PVC ceilings with a mirror effect can be installed in absolutely any restriction rooms. In this case, the installation passes by the type of installation of a conventional stretch ceiling.

• have the highest degree of reflection, so better than other materials can visually increase the space.

Mirror ceiling in the room photo

• With mirrored surfaces.

• With adhesive base. Special film, which they are covered from the outside, gives the mirror material.

Such products can not be mounted in rooms with high humidity.

How to make a mirror ceiling with your own hands: Features of various ways of mounting mirror structures

Due to the fact that mirror suspended ceiling Indoors can be different waysEach design has its own fastening features:

These hinged ceilings are based on the design of the structure in the form of the letter "T" and include:

• Suspension with the possibility of mechanical adjustment.
• Profiles - guides, transverse and retaining (power).
• Corners, with which the system is attached to the wall.

First of all, the markup of the future ceiling is carried out, the basis of which will be a horizontal line with an indent of 10-15 cm from the ceiling surface carried out around the perimeter of the room. It is attached to the guide profile and suspensions. The mechanisms installed in the suspension allow you to adjust the evenness of the horizontal plane of the ceilings.

Surface markup for a mirror ceiling type "Armstrong"

Cross and power profiles are fixed to the suspension, recreable design from cells. They subsequently laid mirrors in the form of panels.

The advantages of such a method include the speed of assembly, the lack of the need to pre-prepare the ceiling, the ability to hide the wiring and elements of the communications system.

A minus is considered a small selection of color shades.

Mirror plates on the ceiling ceiling fold into rolls. Before attaching a ceiling coating, it needs to be carefully aligned. The roll is deployed and leave to fly out within a few days on a flat smooth surface.

Mount the mirror plates on the ceiling is very easy. To do this, the opposite side is covered at the production stage of special compositions that ensure reliable polystyrene fixation to the ceiling surface.

Before starting the design, you need to remove the film, then carefully attach the cloth to the ceiling and press. Air bubbles remove from under the coating with a rubber roller.

Registration of ceiling surfaces in this way requires careful preparation.

This is a combination at which the suspended design is used by the type "" and the plates fixed with the help of glue. The mirror plate is attached to the frame, and the glue provides it to a stable position.

The mirror ceiling of this type is represented by many design solutions.

The minuses include the complexity of the process.

Such systems are most often used in the finishing of the premises, without requiring additional efforts to prepare. Glossy film, well reflecting light, makes the surface of the ceiling smooth, creating a mirror imitation.

The most important thing in this case is to correctly produce measurements, since the smaller cloth will be difficult to mount, and the ceiling exceeding the ceiling over the time it starts to be saved.

Installation lies in the installation of the baguette, to which, depending on the selected method, the glossy canvas will be mounted. Its after fixing to the main design heated with a gun to 60 degrees. Becoming the elastic, the canvas is stretched and levels as cool.

So that the power of the tension did not follow the baguettes, they should be attached to a dowel-nail with a step of 25-30 cm.

It is mounted from aluminum strips to which a mirror spray is applied. Big choice Color shades allows you to choose the appropriate option. In order to highlight the mirror on the ceiling, the color of the plates and the rail should be different.

The main feature of the design of this type is to install the frame in the strict plane. Due to the fact that the rails are susceptible to the temperature differences, with time the framework can progress. Therefore, between the wall surface and the final beam of the frame, you need to leave a gap of 3-5 mm.

The beams are subsequently attached rakes, between which the mirror cassettes are stacked.

The mirror on the ceiling indoors will perform the role of the original. Combining such coatings with other materials, it will be possible to create exclusive ceiling surfaces.

No need to fear difficulties. Mirror ceilings can be easily assembled using materials that do not cause problems in laying. But such a ceiling will become a real pride of the hosts of the house.

Mirror film for stretch ceilings

Mirror PVC-web - the best alternative to the real mirror on the ceiling. The use of small inserts or solid mirror sheets on vertical surfaces or as countertops is justified.

But on large planes, such as the floor and the walls are much more practical, it is more convenient and more reliable to use materials imitating mirrors, and not heavy, easily beating glass. That is why for horizontal surfaces, technology of bulk floors and stretch ceilings With a mirror effect.

The PVC mirror film for stretch ceilings according to its reflective properties is surprisingly similar to the real mirror. Externally, it resembles a thin sheet of steel or foil. The company Time Siling offers a very high quality mirror fabric produced in Germany.

The cost of such a film cannot be called, but its durability and excellent external data are spent money. You can buy a mirror ceiling in two most popular colors: Gold (907) and silver (906).

Width mirror film For stretch ceilings - 130 cm, so single-level mirror ceilings are only in tiny hallways, narrow corridors, small bathrooms and restrooms.

In all other cases, two-facturine or bunk ceilings are installed. This is explained by the fact that on the mirror canvas, it is impossible to hide the welds, so this type of films are not welded. Special separation profiles are used for their compound.

How to make a mirror ceiling yourself (video)

The installation of a mirror ceiling is not particularly difficult, so it can be done independently. There are several types of such ceiling structures. They visually expand the space that is very relevant for small areas of the premises.

The mirror on the ceiling is an original designer solution that can radically convert the interior of the room. It can give a special atmosphere and sophistication.

This type of ceiling surface is well suited for poorly lit rooms, since it is capable of creating the illusion of the presence of a large amount of light. The mirror finish will also transform a small height room, because it will seem that the ceiling is located higher than in reality.

Often the mirror is not located on the entire surface, but are decorated in the form of insertion into the ceiling construction. In this case, it performs exclusively decorative function.

Types of mirror ceilings

There are several varieties of such ceiling systems:

1. Stretch ceiling. To get a mirror effect, in this case use PVC film. It is characterized by good reflective qualities that differ from those that have real mirrors. After installing mirror ceilings of this type, the illusion of the expansion of the surrounding space is created. The reflection in such a surface is obtained blurred, not very clear, as if blurred. The advantage of such ceiling structures is that they are superbly looking in rooms of various purposes, including those where it is constantly observed. increased humidity, as well as with any ceiling configuration, including a multi-level view.
2. Polyester mirror plates on adhesive basis. They make them in rolls. If this web is chosen for the ceiling surface, it is necessary to find out whether it is suitable for installation in rooms with high levels humidity, if the repair is scheduled in the bathroom or bathroom.
3. Glass mirror ceilings of classic type. This design is a good reflector, therefore performs the task of visual spatial expansion in the best way.

Installation of a mirror stretch system should be engaged in the staff of the company in which it was ordered. But the ceiling of polystyrene plates can be made with their own hands.

Mirror surface device from polystyrene slabs

Getting Started with the mirror ceiling of this species, you must first align the plates. It is best to perform this work under load and then it will happen much faster. On the back side Each tile has a glue layer, so the gloveting of the elements on the ceiling surface is simply carried out quickly.

You can glue the mirror tile products not only on plasterboard, but also on plaster. So that air bubbles are going under the plates, specialists advise to use a special rubber roller, with which they will be eliminated.

If you plan to install a mirror ceiling of polystyrene products, you should not use very powerful or halogen lamps for embedded luminaires, since the coating may be deformed. Installation of such a ceiling surface will cost cheaper than mirror glass plates.

Recently, the laying of polystyrene elements on the ceiling is becoming increasingly popular.

Installation of glass mirror ceilings

For the arrangement of the mirror ceiling surface, separate tiles of rectangular or square shape are increasingly used. They are produced both in traditional color and in others. color solutions - Blue, pink and golden.

First of all, you need to calculate the required number of tiles, having previously recognized their dimensions. Cutting them should be professionals, because for such work it is necessary to own certain skills and have a special tool. Next, in the tiles you need to prepare places for mounting lighting devices.

Installing mirror tiles on the ceiling

Such work is performed in a certain sequence. First prepare the ceiling surface. Mirror tiles are allowed to install directly on concrete base. But such a ceiling overlap is rare when it happens absolutely even, and the surface under the finishing of this type cannot have defects, since the reflection of the reflection will be incorrect.

As a result, the overall impression of the mirror ceiling occurs, and its advantages will be unclaimed. For this reason, experts advise to align the surface with moisture-proof material - plywood or drywall.

Then begin to install mirror ceiling panels, using one of two existing ways:

• by gluing;
• using fixing screws.

For gluing, use special glue. It is applied around the perimeter and the diagonal of each product. Tile already with adhesive composition pressed to the ceiling surface and wait for a while. The hand is removed only when it can be seen that the panel glued and not fall.

When the mount is carried out on the screws, in each corner of the tile, the holes under the self-tapping screw are pre-triggered. Then, on each screw to avoid damage to the glass surface, the rubber washer is placed and fixed on the dowel.

In places where there are fixtures of screws, in the future there are special chrome-plated caps that attach the ceiling surface aesthetics.

Suspended Mirror Ceiling Designs

This method of installing the mirror on the ceiling refers to complex variants. It requires construction suspended construction. It consists of metal carcass With guides, which then places mirrors of a certain size. The design needs to be durable because it should withstand the considerable weight of the mirrors.

Mirror ceilings from other materials

Worthy alternative original mirrors is anodized aluminum. True, the reflectivity of this metal compared to them is not so high.

There are two groups of aluminum mirror ceilings:

• rush;
• cassette.

They are often used in the interior of residential rooms, as well as in the kitchen.