Pollution of intercine joints in the bathroom - the usual and fairly common phenomenon. The formation of dirty raid and black points on the thicker seams is the result of the activities of mold fungi. Neither the high quality of the joints of the joints by the Tiler Master, nor the processing of their best silicone sealants with a fine-resistant structure, do not guarantee protection against mold.
The fact is that in microscopic depressions and pits over time, particles of dust, dirt, soap and moisture accumulate, creating an ideal medium for the development of a microbial environment. Therefore, if you follow the cleanliness in your home and take care of your health, we bring to your attention a few effective ways Cleaning seams between tiles and bathrooms, which can be carried out independently, without resorting to the help of specialists.
Method number 1 - cleaning of soda seams.
The easiest and not costly method. To do this, you will need a pack of soda food, old toothbrush and a large bath cleaning brush. Next, the procedure for such:
Special attention should be paid to places where black dots were formed. Sodium bicarbonate is an excellent antiseptic and destroys a 100% embryo fungus.
Method number 2 - cleaning of seams by vinegar.
Method No. 3 - cleaning the seams by the bleach.
For this, any cleaning agent with a large chlorine content (whiteness, sanitation, sif, comet or domain) is suitable. Next steps are also simple as in previous versions:
It should be noted that this method is suitable only for grouting white, in other cases whitening agents may affect the color.
Attention! When working with household chemicals, be sure to use rubber gloves, mask and glasses.
Method No. 4 - cleaning of seams by special means.
Among the household chemicals there are a number of special potent funds (Silita, Veksa, Mildewa Rimouver from Sano, etc.), intended for fighting a raid, mold and other types of persistent contaminants that are characteristic of bathrooms. They are easy to use and eliminate the need for mechanical impact, but require compliance with certain security measures (using gloves, masks, etc.). How to wash the seams between tiles?
Method No. 5 - "Home" Silit Bang.
The concentrated agent that can be prepared at home is a real rat mixture, but perfectly copes even with deep contaminants.
Structure: 1.5 liters of warm water, 150 g of food soda, 100 ml of vinegar (7-9%), 25 g citric acid.
Instruments: Sponge or brush of small size, rubber gloves (required!).
Cooking mortar: Drain in water soda, we pour neatly into the liquid lemon, and then acetic acid. All ingredients introduce gradually to avoid too turbulent reaction as a result of mixing acids with soda.
We act:
Attention! The remnants of the concentrated solution, falling into the draining of general sewage can damage the thin gaskets made from rubber. Therefore, before pouring the remaining mixture, it must be diluted with water (1: 3).
Method No. 6 - cleaning of hydrogen peroxide seams.
A good antiseptic and non-aggressive means is hydrogen peroxide. Such a solution does not require flushing and prevents the liquor's further spread. Of course, the problem of the spots, this means not solve, but with a recently appeared mushroom, the peroxide copes perfectly.
To prepare a solution of a cleaning solution, peroxide and water should be mixed (1: 2). Treat all seams with finished mortar and leave for drying. You do not need to flush.
Method number 7 is the renewal of the seams of water-emulsion paint.
If it is not possible to completely remove the stains from the thicker seams, it is possible to achieve an ideal result using waterproof water-based. In this way, you can upgrade the joints between tiles in the bathroom, and they will look like after recent repairs. When choosing paint, you need to consider one rule: it should be darker than two, and then three tones of the grout itself. During the day before staining, the seams need to be treated with antifungal agent (you can buy in any construction store). Paint is recommended to apply in 2 or 3 layers.
The success of the cleaning of intercutric seams in the bathroom depends on the degree of pollution. Sometimes there is enough soda or acetic processing, but it happens that black and gray divorces remain even after careful treatment with potent means. This means that the fungus firmly let his roots and should be done dramatically.
Method number 8 - removal of the upper layer of the grout.
To do this, it is necessary to armted by sandpaper and carefully erase the layer of mushroom mushrooms. Then the site must be treated with antifungal agent. If, as a result of removal of the upper layer of the grouts between the tiles, a noticeable catch was formed, it was possible to eliminate it by applying a new layer of grouting.
Method number 9 is a complete removal of old grout and applying a new one.
This is a cardinal method that will require the availability of special tools and ... a male hand. The grout is smelted with a screwdriver or removed completely with the help of a grinding machine or a saw bladder. The resulting gaps must certainly be disinfected with the solvent, then predict and fill in a new grout.
To prevent the appearance of mold patterns on intercine seams in the bathroom Take a note of several useful tips.
What to clean the seams between the tile? How to whiten the seams between tiles? These questions ask themselves every second mistress, because in almost every apartment there is a room where the tile is laid on the floor. Accordingly, everything sooner or later think about cleaning the seams between the cafeter, as they tend to darken over time, it is especially visible on a white grout. It can be a limestone falling, dust and dirt, mold. How to bleach the darkened seams between tiles, what means can help in this? We will deal with how you can whiten the seams between the tiles.
Mostly tile on the floor stacked in the bathroom. In this room, naturally frequent steam formation, which binds the dust that has seen on the floor surface, and thus even more "sticks" it to the tile and seams. My floor, we, as a rule, pay attention directly to the cafes, with a smooth surface of which, dust is easily removed by a wet rag, sponge, etc., while driving dust into intercine seams. Therefore, if you have noticed the grout darkening before applying aggressive tools on its surface, try simply to lose a wet brush first. If the dirt still did not have time to enter the grout, the dust just rolling, and you easily remove it with a wet sponge. In the case when you removed dust, and the result did not suit you, the seams are still not white enough, as you would like to begin to whiten.
How to wash the seams between tiles with priests? To independently prepare a solution that will produce whitening effect, you will need water, soda, vinegar, lemon juice, protective gloves, brush. To clean the seams between the tile, it is necessary to wear rubber gloves and gently mix 100 g of food soda, 1/3 cup of lemon juice, 1/4 cup of vinegar 9% and 1.5 liters of warm water. With a mixture of food soda and acetic acid, a stormy reaction occurs with the gas selection, so be careful. To mix the components of the solution, take a spacious tank so that the foam does not start pouring out the edges of the container. A comfortable brush while the reaction is being reacted, apply the solution, you will see the result right away, but for a better result, leave it for 10-15 minutes, then sweete and rinse with water.
While whitening the seams between the tile is another simplest people's way: a cleaning solution of citric acid. Proportion: 1 Packet Acid on 1 cup of water. Apply for 15 minutes, then rinse the seams with water.
Clean the tile seams will help a sponge consisting of 100% melamine. This sponge has a property without applying additional chemicals Remove dirt from the surface. It is white, has no odorous smell, made by special technologyThrough which, remaining soft, it acquires almost hardness glass. Melamine's hit in the human body is not desirable, so it is not necessary to wash with a sponge dishes and other surfaces intended for food (refrigerator shelves, countertops, etc.), and for cleaning the intercine sutures on the floor is perfect.
When using the sponge, it is erased as an eraser, so the cleansing is better to start the sponge corner, and not the entire surface, so its service life will be much longer. Before using the sponge, it is necessary to wet and neatly press. Practice has shown that the melamine sponge is not coping with deeply affected by mold, but simply contaminated tiled seams is good.
Of course, in the store you can find a special remedy for cleaning seams, but each house has many different cleaning and detergentswho will cope with this task no worse. Experiments have shown that it is almost equally well coped with the cleaning of intercinerate gaps, clean the joints between the bathroom and tiles and the means to eliminate the lime-plane, and cleaning products for the toilet bowls, and various universal bathroom cleaning agents and kitchen, when destroying the fungus - chlorine-containing means. Therefore, before going to search for a special solution, it is worth trying to clean the seams already available.
When using chemicals, always use gloves. Provide good air ventilation. In a rapid place, try to apply a cleaning solution on the tile to check its resistance to the aggressive environment if the tile is glossy, it can lose its shine due to a long detention on her cleaning agent. Also, check the reaction of the color forces, as some of the tools can select the pigment.
Another option how to clean the seams between the tile - pairs. Many manufacturers and sellers of steam cleaners recommend them as something can be laundered between tiles. Hot steam helps to fight fungal raid and mold. When buying a steam cleaner, it is better to focus on customer feedback, because not all models of this type of equipment can cope with this task.
There are particularly launched cases when none of the funds will not save and wash the seams. This is especially true of the surfaces affected by fungus, mold, with which chlorine-containing solutions do not even cope. In this case, a complete replacement of the grout is needed.
If you decide to do this without the help of specialists, then be patient, because you have to completely get rid of the old grout, that is, to dig it. To do this, you will need some scraper, from the remedies - it can be a screwdriver. After you delete the entire grout, apply primer, wait for it to complete drying and apply fresh grout. Surplus remove until you dried, then it will do problematic.
We often clean the tile seams gently gently, then you do not have to resort to the use of aggressive solutions. Perhaps it is not worth using a white grout on the floor, then you minimize your works and the costs of cleaning intercutric seams.
izplitki.com.
3 Methods: Use of oxygen bleaching of a chlorine bleach and food co-use of a steam cleaner
Few who like to clean the seams between the floor tiles, especially when they are strongly contaminated with stains that are difficult to remove. Following the following advice, the seams between the tile in your apartment will also look clean and beautiful as soon as after repair.
Oxygen bleach is a powerful cleaning agent, which consists of hydrogen peroxide and soda. The tool begins to act when it is mixed with warm water. Oxygen ions contained in the bleach destroy the miselers of the mud, splitting them into small particles that are very easily removed.
If the oxygen bleach will be ineffective, then use chlorine bleach. However, this solution should be used only for white seams, since the bleach will spoil the colored grout.
A steam cleaner is an effective device when neither oxygen, nor chlorine bleach can cope with the cleaning of the seams.
ves-mir.3dn.ru.
Tile is an excellent material to protect the surface from contaminants. In addition, it is not demanding in care. However, sooner or later, the question arises how to clear the seams between the tile, as the usual wet cleaning does not cope, and the darkens on the joints make the floor sloppy.
To clean the seams between the tile on the floor, you need to know why they are so fast getting dirty. It all depends on what room on the floor was used the tile. Usually in the kitchen, in storeroom and utility rooms, it quickly loses an attractive look, due to constant contact with dust, mud and other substances. And if the tile itself is clean, then to clean the joints need to spend a lot of time.
You need to choose a way depending on the variety of pollution.
Often, the seams between the tiles are darker, due to the way there:
The grout, which is processed by the seams, does not quickly acquire aesthetic, since various particles adhere to its rough surface. Therefore, even during repair work Trying to choose a practical dark shade, especially in the kitchen or if the room is passing.
Wash the seams between the tile on the floor without using additional tools and detergents will not work. Therefore, you should take care of it in advance and cook everything.
Under hand it should be:
When everything is ready, you can start cleaning the joints. There are several proven ways to eliminate mud, it is enough to choose the most optimal and not spent time.
Many, asking the question, than to clean the seams between tiles on the floor, hurry to the store for expensive detergents. However, if there are children in the house, or people prone to manifestations of an allergic reaction, then you should not use chemicals to combat mud at the joints. In this case, it is better to resort to folk recipes.
It will be necessary to take 3 parts of Soda on 1 part of the water so that a thick paste is in the end. This composition you can easily whiten almost any seam. In the process should be protected by hands using rubber gloves.
It will be necessary to apply a thin layer soda on the seams. Spray vinegar on top of it. As soon as the chemical reaction began, start shooting a foam cloth, along with pollution. This method, unlike the previous one, cannot be called universal, as it is not safe for marble tiles, and can spoil the lime grout.
In the tank with water, two cups of any white should be dissolved. Apply on the seams immediately after cooking and wait a bit. However, it should be careful with color joints, such a way to clarify them and the shade will most likely be damaged. To launch a solution in the seam, you can use the brush. Special attention is paid to the corners in which the dirt accumulates.
Another excellent technique allows you to get rid of very strong contaminants. It is enough to take a glass of food soda and produce it in one quarter of 3% of the peroxide solution. You can add for greater efficiency of detergent. The resulting mixture is rubbed into the seams, and with the help of the brush, fat and dirt on the jacks of tiles are removed. It should be careful because the composition whitening the seams, so it is not recommended to use for colored tiles.
There is a mechanical way how to quickly cope with the contamination of the seams on the tile will help the steam cleaner if there is such a house. Enough to give him to reach the right temperature mode and hold ordinary cleaning. The special nozzle should be used in operation, which will allow you to completely direct the steam stream into a polluted seam. If there is no such device, you can remove dirt from the seams with a spatula or scraper, but this reception will take much more time.
If there is no darkening from dirt and dust between the cafeter, and the mold and fungal disputes began to grow, then, most likely, the usual detergent will not cope with the problem. You can, of course, try to remove it in the ways described above, but if the problem returns, it will be necessary to resort to more cardinal techniques.
Such an update of the joint will solve the problem, and prevent the fungus spread. Full joint updates are recommended to do from time to time, since the material still gradually collapses and loses attractive appearance. A poor-quality grout is also the cause of the destruction of cladding, the accumulation of moisture under the tile, the development of mold.
Often the problem with the cleaning tile becomes immediately after it was put. The grouts remain on the tile, poorly washed and building dust, paint, primer. One soap solution will not work here. In this case, it will be necessary to use:
It is impossible to use them undiluted, only as a component in solution. They are able to soften and wash almost any pollution. However, before applying such a solution, you need to be sure that the tile is able to easily transfer such an impact. Some inexpensive tile, after such a cleaning, irrevocably loses the initial attractive look. Use the blade or scraper in the paper should be carefully trying not to hook the decorative component of the tile.
The trim from the tile in the bathroom will last long. But if after each water procedure, the surface does not wipe, then over time, the seams between the tiles will lose their original appearance and will become dirty. They settle for lime deposits, dust, moisture, and sometimes mold and fungus. What to clean the seams between tiles on the floor and walls? The answer to this question you will find in our article.
Increased air humidity in the bathroom and the use of household chemicals for swimming are the main causes of pollution of the seams. It is impossible to completely prevent this process, but you can cope with its consequences.
The seams between the tiles on the floor and the walls can become dirty with improper operation and installation technology during repair:
Dirty seams are able to spoil the appearance even the most expensive tile. If the pollution does not fight in time, then mold or fungus may start in the gaps. They will cope with them much more difficult.
Economical hostesses can take advantage of appropriate and safe tools. Their choice depends on the degree of pollution of the interporter gaps and the absence or presence of fungus.
Return the appearance to tile and clean it from a limescale with the help of ammonia. To do this, make a solution:
The field of such a processing ceramic tile will shine as new. In addition ammonia It has antimicrobial properties and is able to protect the material from mold some time.
The easiest method is the use of soda, which is almost always in every home. Nothing difficult to do with it. It is enough just to dissolve to the state of the pasta with water, apply on dirty seams and clean them with a toothbrush.
Interputer gaps on the floor in the bathroom are simply sprinkled by soda, which is wetted from the sprayer. After that, the old toothbrush is also used. Soda with cleaned joints is washed off 15 minutes after processing. This antiseptic can be used to prevent fungus in the bathroom.
Not only from dirt, but also from fungus you can clean the gaps between the tile of the mixture of soda, vinegar and lemon juice. The tool is prepared from three tablespoons of soda, into which a solution consisting of the following components is added:
In the soda, the solution must be poured gradually because there will be a strong reaction. By efficiency, the resulting mixture can be compared with the best industrial cleaning agents.
On the seams, the composition is applied with a brush. After 10 minutes, when the mixture will dry out, you will need to apply a new layer of composition. After 15 minutes, the walls and floors are thoroughly washed with water. It is possible to wash the dirty gaps by one vinegar, which is applied with a spacker to problem spaces. After 10 minutes, the tool is washed off with a sponge.
Adding whiteness or liquid chlorine-containing bleach into the food soda, you can get a mixture that will clean from dirt, mold and bleaching intercutric gaps in the bathroom and in the kitchen. If the seams on the walls and semi are colored, then this means will not fit.
White or bleach in soda need to add such a quantity to get a pasty mixture. It is applied to the ceramics with a spatula and is withstanding until complete drying. From the surface, the tool is washed off by a rigid face of the kitchenfish or brush.
You can cope with contamination of gaps without solutions, using only mechanical methods for this:
READ ALSO: What to do if the mercury thermometer crashed in the apartment
Choosing a means for cleaning intercutric gaps in the bathroom, attention should be paid to the composition. For colored seams, preparations are not suitable with bleach. Their use can change the color by making it uneven and fad.
The most popular and efficient means are considered:
READ ALSO: Cleaning aquarium for fish at home
With the help of the described methods, recipes and funds, you can return the tiles and seams a clean and attractive surface that was immediately after repair. But in order not to spend time cleaning the solar dirt and fight mold and fungus, the walls and the floor can be kept clean.
ATTENTION, only today!
Ceramic tile does not require specific care during operation, but the seams between the tile are rapidly contaminated and clean. Such a problem may occur in the bathroom or in the kitchen.
Important! Before cleaning, you need to wipe the surface of the tile with a damp cloth without using chemicals.
Cleaning of interputric seams can be carried out through the use of special chemicals. Folk methods for cleaning the mud at the junction of tiles are actively used. For efficiency, several methods are used simultaneously, sequentially.
The most popular and effective are:
| Means | Method of cleaning | Features |
| Soda + vinegar | Soda Fullcan Mix with 80 grams of lemon juice and 60 grams of vinegar. 2.5 liters of warm water is added. Blend on the seams and keep half an hour. After rinse the remedy from the seam. | Work only in gloves, as the mixture has an acid medium. Whitens interlocking mixture. |
| Ammonia | Connect 7 glasses of warm water, soda half a cup, 50 grams of vinegar and 30 grams of ammonia alcohol. The principle of use is the same as in the first case. | In addition to gloves, the gauze bandage is additionally used. Disinfects and whitches the seams. |
| Oxygen bleach | Incable proportion to mix the oxygen bleach with water temperature. Apply on the seams and wait for 1 hour. Wash off with water. | Non-toxic cleaning method. Effective with deep pollution. |
| White | Apply to the seams and wait for complete drying. Subsequently, the remedy needs to be thoroughly rinse with warm water. | Throughout a long time, the caustic smell remains, the room requires careful ventilation. |
| Special cleaning agent | In accordance with the preferences of the hostess, you can purchase a chemical agent of different focus. | Individual characteristics use. |
| Steam cleaners | Special devices that with a hot steam remove deep contamination in gaps between tiles. | Expensive, but effective device Reusable use. |
The bathroom is a specific room where high humidity, the tile constantly interacts with water. The place of the junction of the tile and the bathroom is very problematic, as there is a constant interaction with water.
Before working, it is necessary to estimate the degree of pollution of the seams, namely the presence of fungus or mold. They are the reason for the need for a deep impact on the amazed areas.
Clean the seams between the tiles and the bathroom in the following way:
The last method is the most effective, but long. If necessary, it also applies in the kitchen. In order for the fungus, the mold was not disturbed for a long time, you can handle the grout of the anti-grapple primer applied by a thin tassel.
Clear the seams between the tile on the floor is quite difficult. The causes of pollution Many and each of them requires a special approach. Depending on the degree of pollution apply different methods Cleaning: Surface, mechanical, cosmetic.
Note! The effects of repairs can be removed using aggressive impact methods: solvents, kerosene, gasoline. Using the blade you can get rid of glue.
Features of surface treatment:
It is impossible to affect metal brushes and jershoes on the surface of the tile, tiles. Thus, the protective layer of the ceramic product can be damaged.
The grout itself is covered with anti-grapple primer. Removal is full and partial. In the process of work, it is advisable to use anti-grab agents at each of the steps.
It is possible to achieve white seams with fat deposits using the following mixture: means for washing dishes, hydrogen peroxide and soda. Must get a soft cashem, which is applied to the joints and is withstanding for several hours. Then the tool is removed with warm water.
Outdoor coating undergoes the most active impact. If you conduct a permanent job in the direction of preserving the purity and integrity of the grout of intercutric seams, then each cleaning will proceed much faster and easier. It is important to study the composition of auxiliary chemicals.
Putting for seams gives ceramics completed. Contrast, white or tone tile, it makes the surface neat and protects the adhesive solution from moisture. But over time this capricious material It is inclined to darmest, fade and covered with ugly spots. The magazine "Tilekapol" will tell how to clean the seams between tiles in the bathroom, in the kitchen or in the hallway and prevent its re-contamination.
photos from http://postirke.ru
Interputer seams are the weakest place in facing. Ceramics perfectly washes, but the grout is less stable and to pollution, and to wiping. Therefore, experienced tilers prefer to use a large-format tile that reduces the number of joints. Nevertheless, completely without seams will not be able to do, and therefore the need to clean the seams between the tiles sooner or later will necessarily arise. The nature of pollution and ways to combat them differ depending on the premises:
Regardless of the nature of the problem, it will be easier to eliminate it with initial manifestations. Over time, superficial pollution not only become more pronounced, but also penetrate deeper. Regular cleaning gives better results than general cleaning a couple of times a year.
Primary funds are well coped with pollution even fungal nature, since they change the pH of the medium, destroying the cellular shell of microorganisms. Competently using chemical reactions, you can push the dirt particles to the surface, after which they will be easily removed. It is easiest to clean the seams on the tile on the floor, since it is easier to apply solutions to horizontal surfaces and give them to act. On the walls will have to try, but nothing is possible.
photos from http://gidpoplitke.ru
In order for the alkaline environment to work efficiently, it is necessary to create conditions for its deep penetration. To do this, you need an ordinary food soda, an old toothbrush and water.
After that, it remains to rinse the tile with a sponge and plenty of water. Such events help clean the seams on the tile from fungus and ordinary dirt, so they should be carried out in the bathroom or for outdoor coatings.
photos from http://motors.az
Perfectly copes with contaminants due to the chemical reaction with the release of oxygen, which mechanically removes all the dirt, even deeply appeared.
If the reason for the appearance of the spots was fungus, the peroxide only remove the visible part, but the disputes of the microorganism in the grout structure will remain. In this case, pure seams need to be treated with special compositions on which we will focus below.
photos from http://www.remontbp.com
Thanks to antifungicidal properties, such a recipe is perfectly coping with mold, and solves the problem to be cleaned in the tile bath.
Think about color
This agent is suitable only for white grout, as it destroys pigments, and when used on color materials will lead to a change in the shade.
photos from the site http://vannalife.ru
Search for funds capable of removing pollution from grouts, both in the construction stores and in the section of the household chemicals of supermarkets. It is possible that some of them have in your farm, you don't even have to go shopping.
Do not forget about protection
Aggressive chemical compounds are able to cause serious burns both when entering the skin and inhalation of evaporation. Take care of your security by defending open areas of the body with clothing and tight gloves, and airways - respirator. It will not be superfluous to enable ventilation or open the windows. If the contact could not be avoided, rush to rush the place of contact with cool water.
For persistent contaminants, you can buy a special marker to the grout, which will paint stains. But it is only necessary to use it after full-fledged antiseptic processing.
photos from the site http://ru.wikihow.com
Durable existing pollution does not always manage to remove even special means. They effectively kill mold, and it stops growing, but ugly dark spots remain on the surface. In this case, clean the stitches on the tile in the bathroom will help mechanical methods of exposure:
photos from http://mr-build.ru
Mechanical cleaning is a rather time-consuming and troublesome way, but at the same time the most efficient. Remember that removing the grout, you do not solve the problem of fungus, and in order for the resulting result to be preserved for a long time, it is necessary to prevent the re-appearance of contaminants.
Today in the arsenal of construction chemistry there are many funds that are capable of preserving the purity and hygiene of ceramic coatings. The easiest, but rather expensive way is to use an epoxy-based grout, which is distinguished by absolute moisture resistance, so that the penetration of dirt and the development of the fungus in its structure becomes impossible. If used epoxy base, Clear the seams between the tile on the floor or the walls will be no more difficult than the tile itself - it will be enough to wipe them with a damp sponge.
photos from the site http://potolkiremontnik.ru
If you are not ready to pay for such convenience, immediately after applying grouts and during operation in rooms with high humidity it is worth treating seams with antifungal impregnations. The market presents the following types of such compositions:
Re-processing should be carried out with a periodicity of 1 time in 6 months so that the question of clearing the seams between tiles in the bathroom has lost the relevance. In addition, manufacturers offer to apply hydrophobic compounds to grout, which eliminate the porosity of the material, making it the surface smooth. This is a great way of prevention for all rooms, so buy one of the following solutions:
And the main rule is not to postpone your battle for cleanliness. Regular cleaning, wiping surfaces dry and cleaning contaminants at the first manifestations will become a pledge of constant purity. Folk savings and modern industry are constantly offering new techniques, so if you have proven tips, share your ways to clean the tile seams in the comments, your experience will be useful to many users.
data-Block2 \u003d Data-Block3 \u003d Data-Block4 \u003d\u003e
chistvill.ru.
Tired of thinking how to clean the seams between tiles?
Update Zatirki
Caring for tiles in the kitchen, in the bathroom and other rooms at home gives the owners a lot of trouble. After repair, the intercutric seams look fresh and carefully, but over time the dirt accumulates, and with high humidity it can be added to it. To return the cleanliness of the seams between the tiles, you can use the proven methods and refresh the seams without updating the grout. Assessing the degree of pollution, you can choose the optimal method, how to clean the seams between the tile: - mechanically; - with the help of household chemicals; - household compositions; - with the help of chlorine-containing agents; - Using the steam generator.
Fat in the kitchen, soapfile in the bathroom, street dirt on the floor in the corridor - all these contaminants are gradually accumulated, and without proper seam leaving, aesthetic appearance is lost, which is especially noticeable on the grout of bright shades. On the floor it is advisable to use dark tones on which the dirt is less noticeable.
For shallow pollution, you can do without chemicals and restrict ourselves to the mechanical cleansing of intercutric seams. You need to take fine-grained grinding paper (sandpaper) and manually clean the grout lines, trying not to leave scratches on the tile itself. The resulting dust is enough to wash off with water. This method gives a good result with surface contaminants, but it is often not recommended to use it, since with each procedure, a thin layer of grouts is removed together with dirt.
Household chemicals
The easiest option is to use a special cleansing agent, for example, Pimolux or Domestos. Cleaning powder or gel need to be applied to the seams moistened with water, to rub and leave for 10-15 minutes, and then remove the dirt with a rigid brush, you can use an unnecessary tooth. The remnants of the cleaning agent must be thoroughly rinse with water. The procedure can be repeated if after the first contamination attempt is preserved.
Homemade means
A good whitening effect gives a homemade tool, for the preparation of which you need to mix 1 cup of water, 3 tablespoons of soda, 2 tablespoons of citric acid and vinegar. The room in which this composition is prepared and used should be well ventilated; Be sure to wear rubber gloves. When processing the bathroom, it is necessary to keep the door open and, if there is an opportunity, forcibly turn on the hood. The resulting mixture is immediately applied to intercutric seams and left for about 10 minutes, then cleaned with a brush and thoroughly wash off the remnants of contaminants and the cleaning mixture. This tool cannot be used for color rates.
For white grout, the cleaning composition is also suitable for a bleach and soda mixed in equal proportions. The resulting pasty mass is applied on the line of the seams, leave up to dry, after which they wash off with a brush with plenty of water.
It can be used as a cleaning agent of hydrogen peroxide, diluted with water (half a glass of peroxide to a glass of water). This composition is also not suitable for grouting with colored pigments, since the peroxide can be discouraged.
Home cleaning agents are better not to use on the floor, since for floor tiles traditionally use dark shades Towing paste, for whom bleaching is not applicable. And for the bathroom, where light tones of grouts are most often used, these tools, on the contrary, will be very useful.
Strong surface contaminants can be eliminated using a steam generator. To clean the ferry, you need to slowly carry a jet of hot steam along the seams lines, after which the dirt can be easily riveted with water. High temperatures also contribute to the elimination of fungus.
In zones with high humidity, most often in the bathroom, in the seams between the tiles, a mold fungus appears, manifested by dark spots on the grout lines and near them. The fungus not only spoils the appearance of the bathroom or kitchen, but also harms the health of people, causing diseases of the respiratory organs and provoking allergies. In order to prevent the formation of fungal plaque, the seams can be protected by processing them with special fungicidal means, or initially use the grout with antifungal components, and it is also necessary to ensure sufficient ventilation in the bathroom and in the kitchen. It is possible to eliminate the funguff that appeared using antiseptics, for example, chlorine-containing funds, processing the fungus affected by the fungus according to the instructions and repeating the procedure several times. If a steady fungal flare was formed on the grout, attempts to clean intercutric seams may be unsuccessful. In this case, only the complete removal of the core material and applying a new grout will help.
To eliminate the solar dirt, very difficult, especially on the floor, especially on the floor, and in the running cases, without fully updating the grouts. To remove the grout between the tiles, you can use special knife, scraper, grinding machine or other available ways. The gaps between the tiles must be predicted and treated with fungicidal means to prevent the formation of fungus, then you should neatly fill the seams with a grouting composition and remove the excess from the tile surface.
When replacing the grout, the question is how to clean the seams between the tile, temporarily disappear by itself. If after repair systematically clean the grout lines with the help of brush and warm water, you can avoid using aggressive chemistry and save the fresh type of tile for a long time. The purity of the intercutric seams is easier to maintain, if you care for them regularly.
The stood of the seams between the tile is the last barcode of the bathroom, which not only gives it a complete appearance, but also performs important practical functions. The fact is that the ceramic tile is protected by icing only on top, the lower side and edges can collapse with time from the penetration of moisture.
The rapid composition closes these weak spots Due to the high moisture protection properties. However, the life of high-quality tile is calculated in dozens of years, the grout serves as much less. To update decorative coating Walls from the tile, it is necessary to remove the old grout. This article will help you perform sweeps of seams quickly and efficiently.
If after repairing the bathroom passed quite a bit of time, and the tile already lost its attractiveness in it, most likely the fact is that the seams darkened or changed the color. There are several reasons due to which such a problem arises:
Understand that the removal of the old grouting really will help help cleaning, even thorough cleaning aqueous solution Lemonic acid did not improve the condition of the tile, then boldly begin to work.
If the seams changed the color and it is impossible to tick the rigid brush using detergents, most likely "settled" the mold there. To understand that it is time to take for a tool, the following signs will help you:
The seam, struck by tiles is useless to superficially clean or paint, it requires a complete reconstruction, however, if the tile "backlash" or falls off, it is more expedient to think about overhaul Bathroom.
To remove from the tile, the grouting tile has several ways, depending on which the tool is used:
To remove the rapid composition of the tile seams use an electric tool, for example, a grinder or drill. That method is good for its speed, but comes only for experienced masters With hard hand, which does not get drown at stripping. This method enjoys only true professionals who are confident in their forces, it does not fit with fans. Please note that the use of the power tool is associated with the risk of tile damage, the appearance of chips, which entail serious financial costs for eliminating flaws.
To clear the seam from grouting a drill or a grinder, you need to carry out a cutting edge or drill along it, observing the same pressure. It is necessary to act quickly and clearly, keep smoothly in the middle of the gap between the tiles. Corners deserve special attention and caution. If you still worry about the safety of the tile, adjust the limiter so that it closes its edge.
The mechanical method of removal of the cloud composition is to eliminate the solution from the seams using hand tool. It is associated with more serious time and strength costs, but more delicated in relation to the bathroom finishing. You will need:
Tip! To remove grouting from the seam using a hand tool, the surface of the tile film should be protected, and the edges of the painting scotch will not be superfluous, as the floor will be necessary.
To quickly free the seams from the solution, follow these steps.
If the mechanical method seems to you too overhead, try to get rid of the tile seams of seams using chemical solvents. Manufacturers offer rather aggressive compounds that can cope with any grout. However, to choose a solvent, you need to know the type of mixture used for grouting. Using the chemically, the blind way will not come out, because to achieve the optimal result you can get a lot of options. Available way to facilitate stripping - people's methodAccording to which the seams need to be treated with a solution of one part of the vinegar with two parts of the water and leave for an hour.
To clear the interlocking space from the paste, act as per plan:
In situations where the grouting makeup is not damaged by mold, but only darkened as a result of pollutants, or his color broke out, there is no need to completely remove. In this case, it is possible to restore the aesthetic look of the seam with the help of a simple technique:
After drying, the protective tape is removed and applied to the entire surface of the wall with wax polishing to give the finish of a fresh look. This option is the restoration of masonry is simple and delicate with respect to the decor of the bathroom.
On the one hand, the stripping of the tel joints is not the most dangerous operation. And on the other, it is associated with certain difficulties and requires the application of the following means of protection:
Perform work is better in a well-ventilated room, every half an hour to take breaks. At the time of handling, the presence of an assistant, which will help in case of injury or an allergic reaction to the reagent.
Whatever the tool you use, after restoring the seams, the bathroom room will look like the repair ended only yesterday.
The dirt in the intercine space is forced each mistress to think about how to clean the seams between tiles in the bathroom. This is done with the involvement of a variety of compositions. Editorial site prepared detailed instructionshow to clean inaccessible places right.
Read in the article
Cleaning of seams between is dictated not only to aesthetic considerations. Timely removal of the formed pollution will protect households from possible problems with health. Interspace are created optimal conditions For reproduction of bacteria and the appearance of black mold. We offer to learn how to clean the grip between the tile to achieve a qualitative result.
Dirt - Serious Cause for Anxiety Getting Started with the cleaning of interputric seams, you should decide on the appropriate composition. Manufacturers offer a fairly large assortment, among which it is difficult to choose the appropriate option.
Among the popular funds for cleaning the seams of the tile is worth highlighting:
HG Review
Read more for Ozzovik: https://otzovik.com/review_1903272.html
Feedback on Eco Mist
Read more for Otzovik: https://otzovik.com/review_2722781.html
In order for the cleaning of intercutric seams as possible as possible, pay attention to the "Atlas Dolphin". The tool allows you to protect the surface due to the formation of a dense impermeable film. Apply immediately after cleaning the intercutant space.
Feedback on the ATLAS Dolphin
Read more for Otzovik: https://otzovik.com/review_5256730.html
The use of household chemicals is associated with certain difficulties: a suitable drug may not be available, or its cost may be excessive for a particular family. In such a situation, deciding than laundering the seams between tiles in the bathroom, it is worth using undergraduate means. Often folk recipes It turns out to be more effective purchased drugs. We offer to meet them.
If we talk about what to clean the seams between is worth paying attention to the soda. This substance has a good disinfectant property and will help cope with various pollution at home. It is enough to add some water and the resulting paste to clean the dirt.
Cooking soda, water and brush If you want not only to clean the tile seams, but also add glitter of the caféil, it is worth paying attention to the ammonia alcohol. This substance will quickly cope with the task. Now about how to whiten the seams between tiles in the bathroom:
Surface thoroughly rubbed If there is no need for household chemicals at hand, consider how to wash the seams between the tile in the oxygen bleach bath. It should be diluted with water in an equal ratio, and then distribute sponge over the entire surface. Exposure time - 1.5 hours. Dirt remnants can be removed with a rigid sponge.
If the listed options turned out to be ineffective, solving than cleaning the seams between tiles in the bathroom, it is worth paying attention to the combined compositions. The paste consisting of a powder containing chlorine, and soda is quite effective. Such a composition well purifies the surface and disinfect. Apply to the contaminated area, it is waiting for its complete drying, and then wash off.
Attention!Such a composition should not be used to disinfect colored surfaces.
A solution consisting of vinegar, soda and citric acid will also remove mold.
If the use of aggressive substances is impossible, and the question, how to cleanse intercutant seams, relevant. It is worth paying attention to. Such a device is not only able to create a stream stream and release it under sufficiently large pressure.
As a result, the dirt first softened, and then knocked out of the interlocking space. A sufficiently high temperature (150-170 ° C) allows you to cope with pathogenic bacteria and fungus. For allergies, the question than to clean the seams between tiles in the bathroom is not worth it. For them, the steam generator is the only effective toolwhich they can use in their apartment. Picture of seams tile tile mechanical method
If the dirt did not have time to penetrate enough deeply, you can resort to cleaning the seams of the tile by mechanical exposure. This will require paper containing abrasive. With it, it will be necessary to process all the joints. After processing, the entire surface is simply washed with water. Instead of sandwich, sometimes a hard sponge is used.
Attention!Deciding to resort to mechanical cleaning, it should work very carefully to not damage.
If you cannot remove pollution completely, you can simply paint. For this, the composition is selected with suitable characteristics and the desired color. The most popular should be attributed to:
The seams between the tile in the bathroom can safely call the weakest link of the walls - during the operation of the room they are polluted so much that even an expensive tile loses its attractiveness against the background of this dirt. It will not be possible to avoid this - unfortunately, these are the conditions of operation of this room. The only thing that can be opposed to this phenomenon is regular cleaning of seams from pollution. This will make a conversation in this article, in which, together with the OKUHNE.Net site, we will deal with the question of how to clean the seams between the tile - we will look at different variants Solving this issue and choose the best among them.
How to clean the seams between tile photos
What chemical method Cleaning tile seams from dirt? This is a banal wash them with modern detergents. But their use is somewhat limited - the fact is that they easily cope with smooth surfaces, but not with rough and porous, which, in fact, and are the seams between. As a rule, dirt is entrusted to them, and modern household chemicals turns out to be a weak helper in this matter, especially when it comes to loyal household chemicals. If you want to try with happiness with the help of similar means, it is better to look for potent solutions based on acids, but with their help to some comforting the result, it is not worth it - the maximum that you succeed, so it is a little brightening the seams, but not more.
How to whiten the seams between tiled photos
Among all such household chemical compositions It is better to pay special attention to the old and kind pemolux, the effectiveness of which is proved by time. But it should not be very expensive for him if we are talking about serious solar pollution. All chemical cleaners are used equally - they are applied on the seams, after which an excerpt is given so that the reagents do their job. After that, the seams are washed with warm water. To increase the effect of their impact, you can additionally use a brush.
In principle, in some way, chemistry acts, but it only acts when the dirt has not yet managed to finally implement in the structure. That is why such a tile care, or rather the seams between her, you need to start from the very beginning of the operation of the tile - in general, you should not bring before the critical moment!
In some way, a mechanical way to solve the issue, how to clean the seams in the bathroom, is more effective - it doesn't matter for it, how deeply penetrated the dirt into the grout structure. You just take into the hands of some scraper and gradually, centimeter per centimeter, read the upper layer of grouts along with mud. Yes, the work is difficult, tedious and painstaking, but the productive.
How to clean the seams in the bathroom photo
If we talk about fixtures with which you can perform a similar job, then it is possible to select except for sandpaper or kitchen scraper. Mechanize this method of cleaning and applying all sorts of nozzles on the drill is extremely not recommended - the only thing you will achieve in this way, so damage enamel. Everything needs to be done by hand, in which there is a lack of this method. Alternatively, you can use non-rigid brushes for metal, but they remove the layer of grouting with strips that are noticeable. The brush and sandpaper is, of course, well, but the best chisel to the semicircular shape, which is usually used by trees on wood, is best. In principle, it is enough to simply make it from a thin tube, cutting it into half and sharpening the edge on the grinder.
In most cases, folk technologies are always more effective than cleaning products. modern technologies. Cleaning with their help of seams between tiles is complex and simple at the same time. In fact, it is a mixture of chemical and mechanical technology - simultaneously it allows and whiten the seams between tiles, and clean them. Despite this, still you have to drink somewhat - definitely, if you want to get a good result.
People's way cleaning seams photo
This technology consists in self-preparation of reagent from reactors and, of course, use it in practice.
This composition is prepared from ordinary food soda, vinegar and lemon. The recipe is simple - six glasses of water, half a cup of soda, a third of a glass of vinegar and as many lemon juice.
The liquid obtained is applied to the seams in this way, it is given a ten-minute exposure to the resulting "acid" made its work, after which the whole dirt is easily flushed with clean water. Strengthen the effect of the impact of such homemade solution You can use the brush - it will help the solution faster into the grout structure. As a rule, to finally clean the seams from the dirt, this operation must be 2-3 times.
Let's say so - there are such pollution, remove which described in the methods will not work. In most cases, this is forged dirt with traces of mold and other uncleans - it makes no sense to fight such mud. Especially with, no matter how you wash it, neither scrapered and either trembled with household chemicals, anyway, it will manifest themselves again - there is a living thing, you can not say anything. It is better to destroy such pollution with cardinal ways. Yes, yes - the old grout will have to completely choose, process the peeled seams with a special primer (for example, Ceresit CT 99), then apply a new grout prepared with the addition of the previously said primer.
How to clean the seams tile photos
I agree, the work is not easy, but if you do not want to change the tile in the bathroom, you can produce it. The situation in some ways will be facilitated by special devices, such as scrapers - their direct purpose is reduced to removing glue from the seams, but also with the grout they cope quite simply. In fact, it is a handle on which wide blades with diamond spraying are attached - the thickness of one blade is 1.5mm, and if your seam is wider, then several blades are installed on the machine. Although you can do and alone - in this case, the knife must be installed a bit diagonally. With this approach, the diamond blades for cleaning seams are rapidly stepping.
One time solving the question, how to wash the seams between the tiles, to re-return it to a few people want - working in the sweat of the face for several days, you will probably curse everything, which is holding this world. But even more you will curse the masters when you find out that there are special compositions to protect the seams from pollution. To apply them is a painstaking business, and not every wizard wants to contact this work. But in vain, since these funds really work. They fill the pores in the grout and thus prevent the penetration of dirt into them - after processing the seams, the grout is easily clean, like the glossy tile itself.
How to cleanse intercutric seams photo
Application of materials of this type on the seams is somewhat problematic - in terms of the fact that manufacturers are extremely recommended that the protective fluid falls on the tile itself. According to them, in places of contact of the tile with liquid can be formed by stains. It is for this reason that to avoid such a turn of events, each seam is recommended to be seeded from two sides with scotch, which, you know, pretty trouble. In general, rely on the fact that the wizard free and will perform this work qualitatively, it is not worth it. You can not control it either, since this liquid is absolutely colorless and after applying it is not visible. In a good way, if you want high-quality seam protection from pollution, then make it yourself. Ask, what is the name of such a liquid? A bright representative of such products can be called ATLAS DELFIN (it embers a white seam with a yellowish tint) and Ceresit CT 10 Super.
In principle, everything, and remains quite a bit. One little Council - If you do not want to solve the question with enviable regularity, how to clear the seams between the tile, do not use the sprinkle of white in the bathroom. The contrasting seams also look very beautiful, and a pure white tile in these rooms is used very rarely, so it's easy to replace a white grout!
