Knowing how to properly clean the cistern and toilet from lime deposits and urinary stones, you will remove even the most difficult deposits, giving your plumbing snow white and cleanliness. Use baking soda, vinegar, cola, oxalic acid, citric acid, or whiteness. In particularly difficult cases, use automotive electrolyte or hydrochloric acid, provided that the sewer system is made of metal. Remove the water from the toilet bowl, treat the surface and leave for 20 minutes (or more, depending on the chosen cleaning method). Then rub thoroughly with a brush and rinse by draining the water from the tank.
A bathroom is a favorable place for the development of microorganisms. In addition, urinary calculus and limescale build up inside the toilet bowl, which spoils appearance plumbing. Knowing how to clean the toilet bowl, you will improve sanitary conditions and restore plumbing, but the main thing is to approach the procedure competently, since the wrong effect will irrevocably ruin the enamel.
If dirt and deposits appear in the toilet, take steps immediately to avoid unpleasant odors and build-up of deposits.
The following types of pollution are formed inside the toilet:
Enamelled plumbing is less prone to the formation of plaque that does not lend itself to removal, but on rough surfaces it appears more often and more intensely.
If going to the toilet becomes uncomfortable because of conspicuous stains inside and bad smell, try cleaning the toilet bowl with a brush. If you are not happy with the result, switch to more serious cleaning methods. Folk remedies are well suited for cleaning minor and stubborn deposits in private houses and apartments that have a plastic pipeline or local sewer / cesspool system.
With prolonged exposure, vinegar is able to dissolve the hard bladder stones and lime without damaging the toilet surface.
To clean the toilet:
To enhance the effect, you can use warmed vinegar essence or vinegar-soda solution (for 1 tbsp. Acid 1 tbsp. L. Soda). The processing mechanism is the same as for washing with pure vinegar.
Scoop the water out of the toilet, pour in the product and rinse by pressing the button on the cistern.
Folk remedies are no less effective: pour 1 tbsp. Of ½ pack of soda. water (first drain the water from the toilet). After 15–20 minutes, pour in a kettle of boiling water so that the dissolved blockages go into the sewer or street cesspool.
If you have a problem with how to clean a dirty toilet, use special or folk remedies. In extreme cases, resort to aggressive ones, like hydrochloric acid and auto electrolytes, because they are dangerous for the drain system.
Larisa, 6 July 2018.Clean plumbing is an indicator that it is regularly looked after. The toilet is often used, so a variety of dirt accumulates in it. If you do not remove small deposits in a timely manner, they will harden and it will not be so easy to get rid of. The main problems encountered when cleaning the toilet are limescale and urinary stones.
Limescale (or water stone) is formed from calcium and magnesium salts that are found in water. These are yellow-orange plaque and stains that appear at the flush points, on the bottom of the toilet, under the rim and even on the lid. The more time elapses between planned cleanings, the thicker the layer of deposits and the more difficult it is to clean them. Limescale must also be regularly cleaned or
Urinary stones are the result of the deposition of minerals in the urine. If you periodically forget to wash off the water, ugly streaks form on the walls, and then a gray-yellow stone.
The formation of deposits is also facilitated by:
Attention! In addition to its unaesthetic appearance, the stone in the toilet is a source of unpleasant odor and a breeding ground for bacteria.
You can clean the toilet bowl from limescale and urinary tartar with the help of available tools that can be found in any home. In especially advanced cases, if the toilet is old or cleaning has not been carried out for a long time, you will have to resort to aggressive chemistry.
This strong enough product will help remove the middle layer of limescale and urinary calculus.
Citric acid can dissolve a thin layer of urinary calculus and limescale.
If in one application all the plaque has not dissolved, repeat the method 2-3 times and there will be no trace of contamination.
The application is simple:
Soda will help to clean the toilet bowl with little dirt. Better to use calcined.
You can also remove yellow plaque and rusty stains with the help of Coca-Cola.
If no folk and cleaning products help, strong acids can be used. These are extreme measures that should be rarely resorted to and strictly observe the exposure time, since such chemicals can corrode enamel and harm pipes and plastic parts.
Medium toxic organic acid. A popular sanitary ware cleaner in the days of our grandmothers. Provides perfect whiteness and effectively removes stone. Nowadays, it can be purchased at hardware stores. Before use, read the instructions carefully and put on thick rubber gloves.
Mode of application:
It is a medium-strength inorganic acid. With it, you can not only clean the toilet from the stone, but also remove rust from the inner parts of the tank. The main advantage of this acid is that it does not damage rubber and plastic elements. Mode of application:
It is a very strong toxic agent. Will remove stone instantly, but should be used with extreme care. Wear protective goggles, a respirator and thick rubber gloves before use. The fumes of this acid are also dangerous!
Mode of application:
Attention! This method is not suitable if you have plastic pipes installed, they will leak from acid damage.
The battery electrolyte is produced on the basis of sulfuric acid and can be found in any shop for motorists. It is strong and very dangerous remedy perfectly dissolves limescale and urinary stones. It can only be used on rare occasions. The method of application is similar to the method with hydrochloric acid: apply, leave for 10-15 minutes and rinse with water. When applying, observe all safety measures, avoid splashing the product, as you can get chemical burns.
As you can see, the rules are simple. It is much easier to take care of the plumbing in a timely manner than to remove "thickets" of stone and plaque on a neglected product.
To remove urinary stones, housewives, along with household chemicals, use folk remedies: citric acid, vinegar, soda ash, whiteness. In the case of long-term plaque, they use more radical methods, such as cleaning with battery electrolyte, orthophosphoric or sulfuric acid. In this article, we will tell you how to clean the inside of the toilet bowl from urinary stones using these and other means.
A urinary calculus inside the toilet is, frankly, an unpleasant phenomenon. Especially a lot of it happens on old plumbing, which, due to its shape and rough enamel, accumulates an incredible amount of urinary stones and lime deposits. The problem is aggravated by rust if the toilet is equipped with a metal cistern, and the water pipes of your house are old, made in the USSR. It is better to replace such plumbing with a new one, and if for some reason this is not yet possible, then you will have to tirelessly clean it weekly.
What is a urinary stone? The bulk is just limescale. An unpleasant color and smell is given to it by particles of feces, rust and urine, which fill the pores of lime formations. In such an environment, bacteria and microorganisms actively multiply, which only intensifies the stench.
If you are serious about cleaning up all this mess, then do not forget to wear rubber gloves, because in the cleaning process we will use quite corrosive substances.
It is best to cleanse in the evening to apply the product and leave it overnight - the longer the exposure time, the less you will have to scrub and scrub. Before starting work, turn off the tap on the pipe through which water is supplied to the tank and press the drain button. Next, you need to remove all the water from the toilet, you can scoop it out with a jar, soak it with rags or remove it with a large syringe.
Many housewives are interested in the question: how to remove urinary calculus in the toilet using "home" means. In fact, there are many budgetary ways to solve this problem. Basically, acids and acid-containing agents are used to eliminate such contaminants, and alkaline agents with chlorine or caustic soda give good results, for example: “ Domestos», « White", As well as baking soda and soda ash.
You should not use abrasive powders for cleaning the toilet, they leave microscopic scratches on the surface, because of this, lime deposits are formed even more intensively.
Let's take a closer look at how to clean the toilet from urinary stones:
An old proven descaler can also come in handy in our case. After you have removed the water from the toilet, take 100-150 grams. regular citric acid and apply generously with a damp sponge food additive on the toilet wall, paying particular attention to the space under the rim. Leave it overnight, and in the morning wash off with a hard sponge or brush. As practice has shown: in a few such procedures, it is possible to completely wash out even the most chronic growths of urinary stones.
You can dissolve 100 gr. citric acid in a glass of water, pour into a filled container and leave overnight. This is done so that limescale does not jam the work of the movable metal joints of the water drain system.
Citric acid will help not only remove urinary stones, but also clean the washing machine from mold and scale.
You can wash off limescale in the toilet with oxalic acid. It represents small colorless crystals that are used in industry for etching surfaces before enamel coating. They are used in the same way as citric acid. It can be applied dry or thinned to a heavy cream with alcohol or water.
Attention! The substance is very corrosive, use rubber gloves when working with oxalic acid.
When using vinegar, we will follow a different procedure. The toilet bowl must be completely dry. In addition to vinegar, we need a few unnecessary rags. We moisten the rags and put them on the walls of the toilet bowl and close the lid, then you can go about your business. It will take some time for the plaque to soften and begin to disintegrate. After about 5-6 hours, we remove the rags, take an old knife or spatula and carefully pry on the pieces of urinary stone, it will bounce off with ease, exposing the surface sparkling with whiteness. If not all pieces have broken off, it is recommended to repeat the procedure.
For greater effect, some sources recommend:
We cannot vouch for these methods, but keep in mind that such recipes exist.
In one of the previous publications, we already wrote about the use of soda ash in everyday life, and today we will focus on how to clean the toilet bowl from limescale with a mixture of baking soda and soda ash.
We will describe two recipes, the first of which is very effective, but unsafe for health, the second works a little worse, but does not pose any danger. The first one can be used in the case of very stubborn dirt, provided that the toilet has a lid and the outlet of the toilet is equipped with a fan. If there are small children or pets in the house, then it is better to choose recipe number 2
The danger of this method is that when vinegar and chlorine are mixed, chlorine gas is released in large quantities, which is very toxic. Inhalation of vapors can cause bronchial spasms, acute poisoning and burns of the nasopharyngeal mucosa. That is why ventilation and the ability to close the toilet are so important.
We need:
Mix dry ingredients in a separate container and apply with a damp cloth to the toilet bowl. Wait half an hour for the baking soda to soften the dirt a little. Pour bleach into one spray bottle and vinegar into the other. Spray vinegar on top of the baking soda, ignore the hissing, it emits carbon dioxide - it's not dangerous.
Then spray the bleach, trying to breathe as little as possible, the fan should already be on. Close the toilet lid and leave the room. After half an hour, you can press the flush button and additionally rinse the toilet surface with plenty of running water.
We will use the same ingredients as in the first case, only without chlorine bleach. Mix soda with water until a thick slurry is obtained, and apply to the walls of the toilet, rub and leave for half an hour. Then spray the vinegar, wait for the reaction to end and wash the toilet.
You can remove urinary calculi in the toilet by using carbonated drinks with a high citric acid content. Sprite and Cola dissolve limescale perfectly. You just need to pour 2-3 liters of drink into the toilet or put rags soaked in soda on the walls. After 8-10 hours, the plaque can be easily wiped off with a brush or scraped off with a suitable object. This method has one significant drawback - it is its price. Isn't it easier to use citric acid in bags, the effect is no worse, but it costs much less.
You can read about how to remove a blockage in the bathroom by following the link.
There are quite a few high-quality industrial remedies for urinary calculus removal. It is enough to go to the store and ask the sales assistant, he will offer several options to choose from and tell you how to use them. Basically, the funds are applied under the rim and left for 30-60 minutes, then washed off with a brush and plenty of water. If the plaque is old, then 2-3 procedures may be required.
Give preference to creamy products, gels or pastes, they adhere better to the surface. The main component of many popular tools such as " Dressing duck" or Cillit is hydrochloric acid, you can save money by buying 33% hydrochloric acid instead of expensive household chemicals in any hardware store. We will tell you how to use it below.
How to dissolve urinary calculus in the toilet if the above methods did not work. This means that the urinary stone has been accumulating for a long time and stronger means are needed to clean it.
Remember to wear rubber gloves when using the acids listed below.
This substance copes with plaque in 10-15 minutes, does not destroy rubber and plastic, therefore it can be used in apartments with plastic pipes. Wear rubber gloves while working.
By the way, phosphoric acid can also come in handy if rust begins to appear on the internal parts of the tank. To remove it, 100 gr is poured into the tank. acids, the same amount is poured into the toilet, spreading along the walls with a brush. After 15 minutes, the tank is emptied and the inner surface of the toilet bowl is actively cleaned with a brush, the water is drained again.
This substance is quite dangerous, working with it, it is worth taking precautions. Do not inhale hydrochloric acid vapors and use rubber gloves, if the exhaust outlet is equipped with a fan, turn it on in advance.
Pour a glass of hydrochloric acid into the toilet bowl and spread it with a brush along the walls and under the rim, close the toilet lid to reduce evaporation. After 15 minutes, rinse and scrub vigorously with a brush.
Liquid battery electrolyte can be purchased at a car dealership, it is used in the most advanced cases.
The main active ingredient is sulfuric acid, as you know, the substance is quite dangerous. The instructions for using the battery electrolyte are the same as for hydrochloric acid, and the precautions do not differ. It is worth saying that this tool cannot be used often.
We answered the question: “how to remove limescale in the toilet?”, And now we would like to talk about preventive measures that will help protect plumbing from limescale and maintain radiant cleanliness.
The appearance of urinary calculus and limescale is a process of more than one day. It is unlikely to harm health, but it is quite likely to sanitary ceramics. In addition, the sight of a dirty toilet or sink can ruin the whole picture of your flawless bathroom. Today we will tell you how to fight the worst enemies of sanitary porcelain and faience in ordinary home conditions.
Reasons for the appearance of deposits
To pick up effective method fight against deposits on sanitary ceramics (faience), it is necessary to first find out the reasons for their appearance, composition, etc. The proverb “You need to know the enemy by sight” is also appropriate in our difficult business.
Plaque not only spoils the appearance, but also destroys the enamel of the plumbing device
Limescale is a deposit of minerals that are found in excess in tap water on the surface of ceramic and chrome-plated products. Basically, pollution forms in the places of flushing in the form of yellow-orange smudges. Moreover, the more often the water in the toilet is washed off, the faster plaque forms.
Important! Failure to remove deposits from the water supply nozzles in time can cause deposits to clog. Monitor the status of each of your “home helpers”.
A urinary stone is a deposit of minerals found in the human body. They are excreted along with urine and deposited on the walls of the ceramic product. Combining with the minerals contained in the water, they form a dense and very unaesthetic layer of gray-yellow color. Unevenness in the ceramic coating aggravates and accelerates this process.
If the ceramic is initially of poor quality, then plaque forms on it faster due to the porosity of the material.
When choosing sanitary ceramics, check the smoothness of the inner surface of the bowl. Ideal option is the purchase of a product from sanitary porcelain, in contrast to the cheaper earthenware, it has a dense structure. This is achieved due to the elevated temperature at which the product is fired. And it is precisely the density that makes porcelain toilets smoother, and plaque and stone do not eat into the porcelain structure so quickly, so it is much easier to clean it with your hands.
It should be understood that sanitary porcelain is a material for the manufacture of elite sanitary ware, therefore, its price is much higher than that of models made of faience. Whether this feature is a disadvantage is up to each user to decide for himself.
Porcelain product
The main reason for the appearance of deposits of any kind is the neglect of preventive methods for cleaning ceramics. It should be remembered that the more often the planned cleaning of the toilet room and the cleaning of the plumbing is carried out, the longer the toilet bowl remains in its original form.
Cleaning with improvised and folk remedies
You don't have to run to the store and spend money on expensive ones to clean the toilet, sink or shower tray from plaque. chemical agents... In addition, effective substances are expensive, and all the more you do not want to spend money on ineffective ones. In order to save yourself from unnecessary waste, and the toilet from limescale and urinary stones, you can use the tools at hand, which are always in the arsenal of any housewife. So, several ways to clean plumbing, borrowed from the people.
The main enemy of limescale is citric acid. It is very effective against deposits that have not reached their critical point.
Citric acid is a great plaque remover
This requires:
For greater efficiency, you can repeat the procedure several times.
Works in the same way as lemon. But for its use, vinegar essence must be prepared:
When working with acetic acid, remember to protect Airways bandage
In the morning, rinse the bowl thoroughly with water and rub with a brush or other brush.
This tool nowadays recedes into the background and comes across on store shelves less and less. But if you come across it on the modern market - feel free to buy it, because it is a cheap and effective way to restore the pristine whiteness of your ceramics. It is necessary to apply the product on a slightly damp soft cloth or sprinkle on the places of urinary calculus and plaque deposits. You shouldn't feel sorry for the substance. After processing the places of accumulation of minerals, clean with a brush and rinse thoroughly with clean water.
Oxalic acid cleans the surface of the toilet in a short time
This drug is in everyone's kitchen. With the help of soda, you can enhance the effect of acid, acetic or citric. Baking soda on contaminated areas destroys the structure of minerals and completely removes plaque from the surface of ceramic products. To clean the toilet, you need at least 200 g (1 pack). For greater effectiveness, it is best to leave the drug working overnight. In the morning, it remains only to process the bowl with a brush, cleaning off the remnants of mineral deposits.
Soda is absolutely safe and effective for cleaning the toilet.
As strange as it may sound, this wonderful drink can not only quench your thirst, but also remove old limescale. To do this, pour 1-2 liters of liquid into the bowl and leave overnight. How the cleaning properties of Cola were revealed is unknown, we can only assume that the drink was poured into the toilet by a caring mother, who later discovered that he "ate" all the deposits.
Important! Although the tools at hand do not have a high concentration of acids or alkalis, it is necessary to work with them with gloves. And when using vinegar, you need to take care of the respiratory tract.
Some housewives even use Cola to remove plaque.
Chemistry on guard of purity
Non-critical contamination can be cleaned with improvised substances. When the limescale deposits look more like a toilet lining, and the formation of urinary stones has acquired a dark brown hue, folk remedies are useless. Only heavy artillery in the form of powerful chemical cleaners can cope here.
Very important! It is necessary to work with caustic chemicals only with rubber gloves! Do not neglect safety when using!
When working with household chemicals, follow the instructions
It is best to use specialized detergents which are intended only for toilets. Be sure to read the product label before use.
Having withstood the product, be sure to brush the bullshit
In case of critical and extremely abundant growth of mineral deposits, you can use a liquid electrolyte, which is used in car batteries. It can be used only as a last resort when other means have not yielded results. It contains sulfuric acid in its composition, so do not forget to take care of your own safety.
Preventive control measures
Everyone knows that preventing pollution is much easier than looking for remedies. In order to prevent lime and urinary calculus deposits from spreading, you need to use several tips:
Avoid heavy contamination of the surface - carry out preventive cleaning regularly
Keeping the toilet clean will eliminate the need to use harsh chemicals. With proper care, your ceramics will shine clean for a long time.
There are rules in housekeeping that remain unchanged for many generations of housewives. A clean toilet is one of those. However, keeping your plumbing shiny is a hassle, even with the sheer amount of cleaning products on the market today. It is especially difficult to get rid of urinary calculus, which turns your toilet bowl into an accumulation of mineral growths with a disgusting smell and gray-orange smudges on the surface of the sanitary ware. How to clean it at home?
Basically, this is a mineral deposit that forms on the walls of the toilet, under the rim and in the place of stagnant water due to the fact that drops of urine fall on the surface. Overgrowth of urinary stones occurs because
The urinary stone is not easy to peel off.
Such a stone is not only an aesthetic problem. The fact is that if you do not fight the build-up, then it can grow to the point that the lumen of the toilet bowl opening narrows and sewer pipes... That is why you need to start the fight with the stone immediately.
There are several options for removing urinary deposits from the toilet. First of all, this is a mechanical method: the stone is cleaned off the surface with a knife, metal brush or sandpaper. However, this option is only suitable for old toilets, that is, “when there is nothing left to lose”: such treatment will certainly leave scratches that will grow even stronger over time. So solutions remain for effective control. These must be acid-base compounds. These can be found in lines of professional cleaning products or you can make your own.
Regardless of the choice, the surface must be prepared for cleaning.
Instructions:
Popular among consumers
Industrial products are available in bottles with convenient spouts that easily slip under the rim of the toilet
Experimentally, three leaders have been identified for removing stone from the drain, from under the rim and from the bottom of the toilet bowl.
Before applying the product, you need to carefully study the instructions and follow them carefully (especially regarding the time of action!), Otherwise you can damage the toilet bowl coating and the integrity of the pipes. And one more important nuance: after one cleaning, it is unlikely that it will be possible to get rid of the urinary calculus. So the procedure will have to be repeated several times, depending on the degree of neglect of the pollution, and then carry out regular preventive cleaning. By the way, the latter is relevant for any option for removing the build-up.
It is interesting. It is better to entrust the maintenance of the enamel of colored toilet bowls to industrial means. Some manufacturers even supplement the instructions for use with the cleaning item for colored plumbing. But home cleaning methods can give an unpredictable result, since it is very important chemical composition enamel, which was used in the manufacture of such a designer toilet model.
In the matter of cleaning the toilet bowl, the tools at hand can be called radical, since they are very effective, but require even more careful handling. So thick rubber gloves, a respirator (if possible) and a brush (just not necessarily metal!) Will be relevant. This is what the modern rating of the most effective and quick ways stone removal.
Please note that this method only applies if the system has installed metal pipes, as plastic can be severely damaged by such cleaning.
Instructions:
The electrolyte should not be used if there are plastic pipes in the house.
It is interesting. An alternative to electrolyte is hydrochloric acid or phosphoric acid. For processing, a 33% solution is used, the action time is 15 minutes. But the acid will corrode plastic pipes.
This cleaning option has one indisputable advantage - after the procedure for removing the growths, the surface of the toilet bowl will dazzle with its whiteness.
Instructions:
Please note that chlorine also neutralizes harmful bacteria. An alternative to packaged bleach is "Whiteness". Usually a standard bottle is used for one cleaning.
Whiteness and bleach cannot be used on colored enamel
The disadvantages of this method include the duration of exposure, as well as some inconvenience: it is very problematic to fill in bleach under the rim of the toilet bowl, so that remains "Whiteness".
The white powder, available at hardware stores, works well for stubborn and stubborn urinary stones.
Instructions:
Oxalic acid can be purchased at hardware stores.
This compound is easy to apply under the rim due to its consistency.
Instructions:
It is interesting. You can use only soda: it will not be able to completely get rid of the stone, but it will perfectly prepare the toilet bowl for further "war".
The descaler works well on small urinary calculi
Powder for removing scale, limescale, urinary calculus; sold in hardware stores. The application is the same as for bleach. Works well on not too old growths.
For one cleaning you need 3-4 bags of citric acid
This is a good option remove small growths; citric acid will be ineffective for old ones. But this way you can only remove the stone in the drain, but to clean the walls and rim, you will have to pick up something else.
Instructions:
Carbonated drinks such as Cola, Sprite or Fanta are based on their high citric acid content. Pour 2-3 bottles of the drink into the toilet, leave for 2-3 hours, clean off the plaque and rinse off.
To clean, you will need to keep the drink in the toilet for about 2-3 hours
It is interesting. As with citric acid, drinks will only work on small deposits. Many cat owners use Cola to remove stone from the walls of the pet's litter box, as other means can negatively affect the animal's sense of smell. Although experienced cat lovers advise a more radical way to deal with deposits - changing the tray.
In order not to have to look for funds to combat old deposits, it makes sense to attend to weekly prevention.
It is interesting. The rough surface of the sanitary ware disposes to the growth of urinary calculus, while on the glossy walls with regular cleaning there are no such problems.
Weekly cleaning will protect the toilet from the formation and growth of urinary stones
In order to negate the chances of formation of deposits in the toilet bowl, you can use
In addition, it is worth remembering about the weekly cleaning of the "white friend", as well as the need to maintain the drain in working order, that is, to prevent leakage in a timely manner. And, of course, you should not clean the plumbing with metal brushes or pour hot food into the toilet - all this provokes the formation of microcracks, from which it is very difficult to completely clean the urinary stone. Another important preventive measure is the absence of urine stagnation, that is, it is necessary to flush it off after each trip to the toilet.
You can cleanse the "white friend" from urinary stones at home. True, it is necessary to take into account that acid and alkali should not be rashly poured into the toilet if the pipes in the house are plastic. In this case, it is better to use more gentle cleaning methods: soda, anti-calcium, etc., or use professional products for the care of plumbing fixtures.
Higher philological education, 11 years of experience in teaching English and Russian, love for children and an objective view of the present are the key lines of my 31-year life. Strong qualities: responsibility, desire to learn new things and improve oneself. Rate the article:
The mess in the bathroom will not leave indifferent any housewife. The catch phrase "The toilet is the face of the hostess" has not lost its relevance today.
Often you have to deal with the fact that even with regular care of the plumbing, the surface of the toilet bowl darkens, rust spots and traces of limescale appear on it. How to clean the toilet from dirt yourself? How to remove urinary calculus, plaque and rust? What cleaning solution or powder should you use to clean your toilet to a shine and not damage the surface? First you need to figure out how certain types of deposits are formed.
The main "enemies" of cleanliness in the bathroom and impeccable type of plumbing include urinary stone, limescale and rust. Let's take a closer look at the problem:
As a result, a persistent brown coating forms on the bottom of the toilet, and when there is a lot of deposits, this can lead to a decrease in the diameter of the drain hole. For this reason, it is necessary to get rid of urinary stones immediately after their appearance.
Plaque forms on the inner surfaces of the toilet and in the cistern. Lime deposits are the ideal "base" for other types of contamination, and to prevent this from happening, it must be removed immediately.
How to clean the toilet from urinary stones, rust stains and lime deposits? Dealing with contamination on the surface of plumbing is not difficult if you know how to do it and act in accordance with the rules.
Cleaning the toilet from plaque, rust and bladder stones will be most effective if you follow these recommendations:
Be aware that dirt may not disappear after the first cleaning. If necessary, the manipulations will have to be repeated several times.
If you need to tidy up your plumbing, you can use a range of products that will not only help remove plaque, urinary calculus and rust, but also restore the lost shine and whiteness of the surface.
Cleaning chemicals
In household chemical stores, you can choose the necessary product, a variety of gels, liquids and powders are presented in a wide range. How to clean the toilet with a store-bought product? All you need to do is follow the instructions thoroughly, and the problem of cleanliness in the bathroom will be solved.
However, many housewives avoid using special means... This is due to the high cost of the chemicals as well as the high toxicity. In such a case, there are a number of folk remedies that you can use without fear of harming your health.
Baking soda
This tool perfectly copes with dirt on plumbing equipment and is suitable for cleaning the toilet from various dirt. Pour a packet of baking soda into a previously "dehydrated" toilet and let it sit overnight. You can carry out these manipulations in the morning, before leaving for work. The main thing. That the toilet was not used for 8-10 hours.
After the specified time has elapsed, clean the dirt with a brush, and rinse off the rest of the product with water. Soda not only has the ability to remove various kinds of pollution, but also whitens the surface.
Warm vinegar solution
Heat 1 glass of 9% vinegar and pour it into the toilet without water for 2-3 hours, then clean the surface of stains. Vinegar is effective against limescale and also dissolves urinary stones.
To achieve the maximum effect, you can make such a toilet bowl remedy with your own hands: add iodine, soda or salt to the vinegar solution (in the proportion of 1 teaspoon of the product to a glass of vinegar). In this case, the agent must be kept for at least 8 hours.
Lemon acid
Empty the toilet cistern and pour 2-3 tablespoons of acid into it. Leave the product on for 3 hours, then clean with a brush. The procedure will need to be repeated several times to get rid of plaque and urinary stones.
Citric acid will not only remove dirt, but also unpleasant odors... You can use it to make your own toilet freshener. Just dissolve a couple of tablespoons of the powder in 1 glass of water and treat the surface.
Vinegar essence
If the vinegar solution does not cope with the contamination, you can apply a 70% concentrate. Remove the water from the toilet and pour the essence inside. After 3 hours, clean the surfaces with a brush and drain the water several times to remove any corrosive residue.
"Coca Cola"
A drink of little use for quenching thirst, however, is very useful in household... It will also help when cleaning the toilet.
Pour 1.5-2 liters of drink into the toilet bowl at night, during this time caustic substances "loosen" the plaque, and you can easily remove their remains with a brush.
These products are effective provided the plumbing is cleaned regularly. But what about tough and stubborn deposits? There are several "serious" remedies.
How to clean rust, plaque, and stubborn urinary stones in the toilet
In the case when sparing means proved to be ineffective, you can use "heavy artillery" in the form of aggressive chemicals.
Monochloride iodine
This substance is available from your veterinarian pharmacy. Pour the solution over the dirt, and after 1–2 minutes rinse with water from the tank. This is enough time to remove plaque, urinary calculi or rust. If necessary, remove the remaining dirt with a brush.
It is important to know that the use of iodine monochloride is not recommended in cases where the sewer pipes are cast iron or aluminum.
Hydrochloric acid
Hydrochloric acid can be purchased at a plumbing store. Pour the liquid into the toilet and let sit for 30-50 minutes. Rinse off the remaining substance with water from the tank, and clean the toilet with a brush.
It is undesirable to use the tool if the works of the sewer system are plastic.
Electrolyte for acid batteries
Any unwanted stains and deposits will disappear with the use of electrolyte. Apply that substance to the dirt and let it sit for 1 hour. After a few times, drain the water to rinse off any residue and clean the surface with a brush.
This tool can cause significant damage to plastic pipes, therefore, in houses where the system is made of this material, it is better not to use electrolyte for cleaning toilets.
Dry oxalic acid
This substance is actively used by the chemical industry and is a fine powder. Removal of stains and plaque is carried out as follows: the acid is applied to a rag and the resulting dirt is wiped off, after which the residues are washed off with water.
You can do it differently: pour dry acid into the toilet with water and leave for 20 minutes. Then drain the water and clean the surfaces with a brush.
When working with these substances, be sure to protect your hands with gloves and wear closed clothing. You should also wear a medical mask or respirator, as toxic fumes can seriously harm your health. It is better to leave the door to the bathroom open, as well as open the windows in the room closest to the toilet.
Most The best way solving a problem is preventing it. Of course, it is impossible to avoid the appearance of deposits, but it is quite realistic to make sure that their number and intensity of appearance are significantly reduced. Use the following guidelines:
The untidy appearance of the toilet bowl, covered with a bloom of rusty-brown color, and the unpleasant smell from it, do not give pleasure. We have to clean the plumbing from contamination. Before grabbing the first handy tool, it is advisable to familiarize yourself with tips for cleaning the toilet in various ways.
Yellow plaque on the toilet can be removed by using suitable products
Contamination that eats into the inner walls is due to the settling of limescale and the so-called urinary calculus.
Plaque appears as a result of the deposition of mineral salts contained in tap water. Traces of a dirty rusty color form on the walls of the toilet in the places where the cistern is drained. The intensity of the formation of these contaminants is influenced by the quality of the water and the health of the plumbing. Even a small, but constant violation of the tightness of the drain valve leads to the fact that after cleaning, brown streaks appear again.
Petrified growths of a dirty yellow color are formed under the influence of urine, the splashes of which fall on the walls, and remain not washed away with poor drainage. Most often, urinary calculus accumulates under the rim of the toilet bowl. If you forget to flush off the excrement at all (which often happens with small children), then petrified growths will appear on the entire inner surface. A small drain causes some of the urine to remain in the water in the lower part of the toilet and also contaminates it.
It is difficult to wash off yellow or rusty deposits in the toilet if the enamel of the inner surface is damaged - scratches, cracks, chips. In this case, the deposits are eaten into the porous material of the ceramic, often penetrating deep inside.
You need a special brush to clean the toilet
Means and methods that can clean the toilet bowl from urinary stones at home can be divided into groups:
It is more difficult to clear the urinary calculus from the toilet bowl inside the drain where there is water. To make such contaminated surfaces accessible, it is necessary to remove the liquid from the lower chamber. It can be scooped out, squeezed out with rags or removed with a syringe. And after that, use any tool that can clean the dry surface.
Another option is to use stronger chemicals that can act on contaminants even when dissolved.
Before cleaning the toilet, you need to take care of your own safety and health. Most chemicals can damage the skin if exposed to it for a long time. Some also have a pungent, unpleasant odor.
Wearing rubber gloves is a must. The door to the toilet should be closed during processing so that the smell does not spread throughout the apartment.
For your own protection, you should use a gauze bandage for your mouth or buy a simple respirator.
If you regularly clean the toilet with a brush, urinary calculus will appear less often.
A good helper in keeping the toilet bowl clean is a brush. The more often the enamel is cleaned, the less dirt accumulates, and it is easier to get rid of them.
Cleaning powders are considered reliable care products. One of the famous is Pemolux. But they can clean minor dirt. Do not use powders often. For all their effectiveness, they have a significant drawback - when pressed strongly, they leave weak scratches on the surface. Over time, the enamel in some places can completely collapse.
Enamelled surfaces can be cleaned with household products. Most of them take a long time to take effect. It is best to start cleaning late in the evening, leaving the cleaner to work overnight. Be sure to close the toilet lid to reduce the spread of odors. You will have to wash the plumbing after the action of the cleaner early in the morning, before they start using it.
Baking soda is of little use for removing dirt from stubborn areas covered with thick deposits. The drug is applicable for cleaning fine dirt of slight yellowness.
The advantage of baking soda is that it can be added to any purifier, it will only improve its quality. Combined action with acetic or citric acids is considered especially effective.
It will take about 200 grams of powder to clean the entire surface of the toilet. It is necessary to sprinkle the dirt with a thick layer, and leave it for several hours or overnight. Then rinse with water and clean with a brush. If most of the dirt has been removed, but some areas remain uncleaned, the process must be repeated. In cases where the action of soda has not worked, a more effective remedy should be used.
Folk remedies for urinary stones
The substance is able to cope with old dirt. For one cleaning step, you will need 2 - 4 sachets of citric acid. Procedure:
For cleaning, 9% table vinegar or essence is suitable. To make its action more effective, you need to prepare before use:
It is less and less used in the household, so it will not be easy to find it. Technical oxalic acid powder will cope with difficult dirt so that the treated surface will even shine.
The sequence of application does not differ from the treatment with other powdered acids.
Any reagent containing chlorine additionally disinfects the treated surfaces, so it is useful for them to clean hard-to-reach places under the rim, which can be a breeding ground for bacteria.
This drink can also be used to clean enamel from mineral deposits. It is enough to pour 0.5 - 1 liter of cola into the toilet so that it flows along all the walls. She acts slowly, so you need to leave it for a long time. But it is not harmful to health and does not have an unpleasant odor.
You can clean the toilet bowl from urinary stones and plaque at home using specialized cleaners sold at hardware stores. It is necessary to choose products specifically for faience and enamel surfaces. They contain the same acids as in folk remedies, but they have a gel concentration that allows them to linger on the surface to be cleaned. It is not difficult to wipe off the remaining gel after use.
Follow the instructions for use indicated on the packaging. Most of these products are sold in multiple packs. In families with small children, it is worth purchasing packages equipped with protective caps that do not allow them to be opened by a simple twist.
Inexpensive brands of toilet cleaners are: Silit, Komet, Domestos, Toilet duck, Sanox.
The most difficult thing is to clean an old toilet bowl, which is literally overgrown with dirt and layers of urinary stones, which conventional means cannot cope with. In this case, it is necessary to take on compositions that require special care. Them correct application will allow you to cope with any difficulties, but there is a risk of irrevocably damaging the toilet itself or the exhaust pipes and gaskets. Vapors of reagents are harmful if inhaled, therefore it is imperative to work with them in a protective mask and gloves. An additional plus - to clean the inside of surfaces that are under water, it is not necessary to scoop it out. Even dissolved, these reagents work effectively.
Phosphoric acid is a dangerous but effective remedy
The weakest of the emergency cleaners. But this is also its advantage - with short-term action, it does not damage plastic parts and rubber seals.
Hydrochloric acid, diluted to 33%, is an effective cleaning agent, but dangerous. You need to work with it with extreme caution.
It is unacceptable to use hydrochloric acid for cleaning toilets in which rubber gaskets are installed or the drain is connected to plastic pipes.
The electrolyte cleans the toilet well
If you cannot find other potent remedies, you can use an electrolyte from car batteries... It contains sulfuric acid, which will have the same effect as hydrochloric acid. This substance is also harmful to plastic and rubber parts. The sequence of actions and safety measures are the same as when working with other aggressive cleaners.
The so-called urinary calculus usually accumulates in the lower part of the toilet - where there is always water. It represents salt deposits Brown... By settling on the walls of the plumbing, they eventually turn into a rather thick layer, due to which the diameter of the drain decreases. Ideally, a urinary calculus should be dealt with as it forms, rather than waiting until it gets old and becomes "impenetrable". It is unrealistic to remove these formations mechanically - neither a toilet brush nor a stiff brush will help you. Only chemistry can help, namely, preparations, which most often contain organic and inorganic acids. However, modern industry also offers products with special surfactants, including those containing chlorine.
So, short review"Chemical weapon" against urinary stones.
It is best to use vinegar essence, the concentration of which reaches 70%. You first need to pump out the water from the toilet - this can be done with a plunger. Then the resulting void is filled with vinegar and left for 1.5-2 hours. Some home craftsmen advise enhancing the effect of vinegar essence with an ordinary iodine solution from a home first-aid kit, combining them in a 1: 1 ratio.
Nine percent table vinegar is also powerful. Only it is advisable to reinforce it with baking soda (1 tbsp.spoon of baking soda in a glass of vinegar). This solution is poured into the toilet bowl preheated to 40-45 degrees and left overnight. The urinary stone will become soft and pliable and can be safely removed.
The recipe is incredibly simple and consists in the fact that you need to pour several bags of citric acid into the toilet. The amount is selected depending on the thickness of the layer formed by the urinary calculus: the thicker it is, the more acid will be required. There is no need to drain the toilet. You will be able to admire the result in 10-12 hours. It is clear that during this time it is better not to use the toilet.
It not only enhances the action of acetic acid (by the way, and citric acid too), but in itself is an excellent cleanser. And hardened formations like a urinary stone are quite a feasible task for her. You just need to provide a fairly long contact with the problem surface. It is done this way: at night, a whole pack of soda is poured into the toilet bowl and left until morning. Then you just need to lightly clean the place where the plaque was.
Liquid electrolyte for car batteries is a super powerful tool, but insidious. It will deal with urinary stones in a matter of minutes. But also with lightning speed, it can harm the sewer wiring, if it is mounted from plastic pipes... Therefore, it is recommended to use liquid electrolyte to clean the toilet only in extreme cases: when the stone does not lend itself to any other influence. And this can only be done if you have metal sewer pipes.
The Domestos line of cleaning products contains a special product designed to remove urinary calculi and similar deposits. It comes in a black bottle and is called Domestos Pink. The information on the packaging states that the product removes limescale and rust by 100%. Used undiluted. Of the shortcomings, only one can be distinguished - the pungent smell of chlorine.
Johnson products are manufactured in Ukraine. The main active ingredient is hydrochloric acid. The product has a gel-like texture. The liquid can be poured directly into the water in the toilet. After about an hour, they wash it off and watch how the state of the urinary stone has changed. If necessary, repeat the mono procedure again.
Comes out in comfortable plastic bottles with a curved spout, so it can be easily applied even under the rim of the toilet. Belongs to the category of highly acidic agents. Just like the "Duckling", it contains hydrochloric acid. According to the results of consumer tests, it turned out to be almost the best effective drug for removing limescale and urinary calculi, including old ones.
