Benches and shops in the country and in the garden are primarily a resting place. But just put a bench - not interesting. After all, you can create a beautiful corner. In order not to relax, but enjoy the nature and fruits of your work. There are many interesting ideas. And often play most simple designs Such that any person who have hands from shoulders grow with their own hands can do these benches.
What ordinary benches, benches know everything they look like - saw, and more than once. But the usual is the simplest - something I do not want. Especially if there are already the process of decorating the site or so far only planning. Why not start with benches? And there and other decorations will catch up. It is worth just start.
In the garden or near the house you want to have more than greenery: the colors of beautiful and different. - It's good, but why not combine them with a bench.
What could be easier? Two wooden boxes in which flowers are planted and between them a pair of sharply and polished boards. You can put this bench near the wall, and to fill a couple of long boards on the wall - there will be a back.
Not everyone likes the flower beds from the tree: wood requires care, and without it quickly loses appearance. It is especially difficult to care for a tree that comes into contact with the soil. Instead of wooden boxes, such as stone or concrete courses can be.
This bench at the dacha do with your own hands is completely simple. You can find ready-made concrete flower beds or make something similar. Board can be purchased processed, but you can do it yourself. Instead of the board, there may be half a log - depending on what style the site is drawn up. Fasten the seat is easier using a metal corner. It is attached to concrete with the help of a dowel, to the tree - with self-drawing from below or bolts through.
If someone has large plants in solid vases, you can implement the following idea. In this embodiment, the bench covers plants. So that there are no surprises, the vases should be very durable ....
There is a similar option to shop from boards and without plants: maybe you need to put on or to put. Supports fold from the boards of the same size, and the seat is from the bar.
Bench bench - non-standard option
And also variations on the same topic: hollow building blocks are used as support. Inserted bars are inserted into the holes. This is the seat benches. Only the faces of the bar sharp, or it will be uncomfortable.
For this garden benches, it is advisable to find blocks big size, with thick walls. If not - you need to securely secure the blocks one with another. The whole task is to secure first blocks (for example with studs), and then to them - bars (bolts or brazers).
If your site is drawn up in the style of Rustic or ethno, the standard approach will not suit you. It is best to use log in this case - with or without bark - this is your choice.
The seat bench seat is painted along a large or medium diameter barrel. Back - or smaller on the diameter of the barrel, or just cut closer to the edge. The legs can also be made of slices of slices of logs (see the photo below).
Bench from the log - quickly and just
The legs and seats are connected together with metal pins: a hole of slightly smaller diameter is drilled under the pin in both parts. The pin is clogged into one of them, the second part is satisfied and also clogs, but they are not hitting the pin, but on wood. In order not to follow the traces, they laid a piece of an unnecessary board and on it are knocking the hammer (or sledgehammer). Such compounds should be quite reliable, but for confidence you can install two or three pins, and you can make a slight log, making a flat area on the same size on both parts connected. By zooming the area of \u200b\u200bthe support, increase the fittings of the seat mounting: all the same, there is a lot of logs.
Option bench without back
Another interesting option The style of "Ethno" is presented in the photo above. It is implemented in stone, but it is possible to make this bench from the log. The seat is a very thick board, the legs are most of the deck of large diameter. In the deck will be cut down the groove under the seat laying. If there is a tool (an ax, a grinder or chainsaw, you can make a cutout) to do simply.
Often the desktop is needed in the country. From the log you can not only make a bench, but also the table. A variant of such an ensemble - in the photo. Only the tabletop is made of boards, all other parts are logs of different diameters or from halves.
The big degree of processing is inherent in the following bench in the same style. The back, legs, armrests are made of thick and not very branches, the seat is made of sterling and treated (purified from the crust and ground) unedged board.
Almost also made another bench. Only boards and branches are located in another direction and the other appearance is obtained. Bench with your own hands of this type does not require great mastery. In this case, the more careful work is, the more decorative the result.
Wicker back - meet infrequent
Around the tree you can make a platform for recreation and bench. Designs are simple, make flooring so altogether simply.
You can add a recreation group. And above the bench can be put - this is the "progenitor" of the ordinary arch - one of the types of light gazebo. And to relaxation to be completely complete, you can do, or.
Few people will put fully metal benches at home. Of course, they can be very beautiful, but in summer heated to incredible temperatures, and slightly cool down - they do not sit on them, since too cold. These shortcomings are devoid of metal and wood benches. Legs I. carrying construction Made from metal, and the seat and the back (if any) is made of wood. And there are also interesting shops in modern design.
Rectangles are welded from the profile, jumpers are welded to the side walls, for which the seatboards are based on. Simple, stylish, reliably, functionally.
In a more advanced form - with armrests, back, soft pillows on the seat, such a design may look like in the photo. A wide seat turns a bench into the sofa, and the comforts add pillows - covered with a cloth furnace foam. In the same style, the tables are made of proftrubes and a tabletop from the boards.
One important moment: If you make a seat or a table top of several adjacent elements, they do not need to be allowed to be allowed. There should be a gap of 3-4 mm between adjacent boards / bars. Wood that swells, then dries. In order for these processes the surface remains relatively smooth, the gap is needed.
If more smooth lines are needed - for families with children - you can bend pipes and make garden benches and a table with rounded faces. This garden furniture is completely safe. The usual round or professional curb is bend, leaving on the sides in the form of the letter "P" with a wide back. The length of this back is the length of the shop. For the table, dimensions make a little more: the legs and the back is longer.
Make two identical blanks on the table and bench. Next cuts the boards the same length. For a seat of about 40 cm, for table tops at least 55 cm. Must attach to tubes with furniture bolts with a flat hat. So that the caps are not sticking out, the hole slightly larger diameter.
The most numerous group shops and benches from the boards. There are structures, more reminiscent sofas, especially if they lay soft pillows on them - and you can lie down.
Garden furniture B. modern style Collect simple: rectangles with partitions from thinner boards interconnected.
Even the ordinary design of the country shop can become an exclusive, if you approach it with a fantasy: Wooden wheels are used instead of legs and armrests. It turned out the designer thing.
Shop from boards with back and wheels instead of the sideways - it looks interesting
And the simplest possible is the board on the legs in the form of the letter "X". Such shops built a century ago, you can see them today.
From the boards you can make a bench in a modern style: in the form of the letter "P". With this design, the main task is to ensure rigid fixation of the legs and the seats: the driving forces are not compensated by anything. In this case, it is important to take a thick board or a bar so that it does not begged. You can put the board "on the edge": so the rigidity will be greater. To enhance reliability, you can set the corner from below.
In the photo option with a stammer under 45 °. Having a stubble or circular saw of an accurate cut is easy to achieve. Precisely docked the workpiece and scrapering them we get an angle of 90 °. If the seat is not to fake, it will serve for a long time ...
An interesting and reliable option bench is presented in the photo below. The legs are collected from the boards of different lengths: each second shorter on the width of the seat board. Interesting idea. Make such a bench easily: it is important to withstand the dimensions, but everything is connected very simple: nails in the seats rae.
Here, it seems that you can still come up with .. and it turns out, much. For example, attach the seat to the large stone.
Make a design of bamboo stems.
Or stone.
Sitting winter will be unpleasant, but beautiful ...
From the stone, we will not make shops - there are not everyone, but from different woods - we can. Tell about the manufacture of simple, but unusual designs. To make your own hand, the bench was the subject of pride.
The design is simple, but it looks interesting at the expense of a specific material. For the legs used a ram with rounded edges. If you have logs little size, You can cut them on the sides. It turns out almost the same effect. Such a material is not so rare, the legs are unusually collected: the bars are laid one on another plastics. It gives the highlight and adds attractiveness.
This bench without a back has a length - about 120 cm, the width is about 45 cm, the height is 38 cm. Rounder the faces of the bar can be possible with a cutter, and you can find a similar profiled. It is more expensive, but it will be easier to work with it: it is already well processed and is simply connected.
Depending on the found cross section of the bar, you will calculate the length that you need. Determine how many bars will have to fold one on the other so that it turns out the height. In this case, 5 bars took one leg. Total 45 cm * 5 pcs - 2.25 m. Two legs needed 4.5 m timber. On the seat used the board 40 mm thick and 90 mm width. For seats need 5 1.5 meters long boards. It turned out 1.2 m * 5 pieces \u003d 6 m.
First cut and process the boards for the seat. Their face must be rounded. If there is no grinding machine or a milling machine, you will have to work emery paper, and you can find such a board or agree on the sawmill so that it is treated with it, and have gripped it: much less work will be. So, cut the same board length, grind and cover with varnish (with toning or without your choice).
Brokes for the legs fold one near one, aligning their edges. With the help of the kitchen and pencil, apply the lines where fasteners will be located. Distance between lines - 7-10 cm.
The pins can be taken metal, and you can make brazen - carved out of wood. The holes are drilled slightly less than a diameter, the depth of the hole is half the pins length. Then they are clogged into one item, on top of the same hole the second item is satisfied. The connection is reliable, but for confidence you can add glue, although then the design will be understood.
With pin connection, the main task make holes strictly one above the other so that the parts planned on the pin give a smooth edge. Part of the work was made - they ran the lines where we will drill, now you need to measure the same distance from the edge. To do this, make a template. We take a segment of a strip of a width of about 1.5 cm. At such a distance from the edge of the bars we will drill holes. By applying it exactly along the edge, we note the intersection of the intersection with the perpendicular lines deposited.
Pins will be installed in a checker order, because we will drill holes through one intersection. Also, the holes on one bar from different sides are made in a checker order. Similarly, on the pins - the disconnection of the legs with the seat is made: two pins for each bar.
Technologically, this type of connection is correct, but it is complex and requires a certain skill. You can do it easier. Fold all the bars one on the other, fasten the clamps, drill through in two or three sets - in the center and along the edges, connect the long stud, with the plated under the hat and the nut with the washers. To the legs assembled in this way, the seat strip can be navigated from above or try to make a pin compound.
The bench is made with your own hands. Stroperation remained
If nail seat nailed, take some mastic for wood suitable color, Add some very small sawdust and stir. By this makeup, smear the locations of the connections. When dried, stripped with a skin. Collect all the details before the smooth condition and cover with varnish or paints on the tree for outdoor work (better not undermined, and which leave the visible wood texture).
How and what can you paint wood. It is talking about the lining, but painting techniques remain the same, and the compositions must be taken to outdoor use.
In any farming, you can find two old stools. Should they be the same and strong enough. We disassemble chairs, leaving a piece with the back and legs. We connect two backs with bars of a suitable cross section.
For greater stiffness at the bottom, at a distance of about 20 cm from the floor, where before the chairs were also jumpers, we make another frame with transverse crossbars. It can be used as a footrest or for storing any things.
After grinding, paints the resulting structure. This time, paint should be usual: different breeds Woods can be painted only by observing colors. Apply a brush or from a canister.
It's small: Cut in size seats from thick plywood (thickness 8-10 mm) and cover it with foam rubber and cloth.
Everything comes in the farm. Even from cargo pallets you can make garden furniture. And there is no need to disassemble them: one use for the seat, from the second we will make a back. You will need only well-processed planks for armrests and bars for legs.
In one of the pallets, we enhance the place of attachment, inserting pieces of bars. By inserting, from screwing with self-draws with one and on the other hand.
From a bar with a cross section of at least 100 * 100 mm we cut four identical segments of 80 cm long. Screw them in those places that have just enhanced. We leave 20-25 cm on the legs. Film four long self-ideas - 150 mm and not shorter.
It is important to observe verticality and leave the same feet. Then the seat will stand smoothly. If there are errors in height, you can try to cut down, but then you will have to saw from above - so that the armrests are smooth. So try to fasten exactly. With the deviations from the vertical, you can only fight the leg again.
To rear racks, the second pallet is dripped, and on the sides - a plank for armrests.
It remains to cut a piece from the furniture foam rubber and cover it with a cloth. You can make pillows and for the back. If you are not going to handle everything thoroughly, but to make the loft style chair, pass by sandpaper or grinding, finishing all the surfaces before smoothness. Cover can be painted, giving wood dark color.
Several videos about how to make benches with your own hands.
You can safely relax in the shade of trees in the summer or to warm up in the sun in a cool autumn day you can on a bench made of wood, with your own hands installed in the garden. In modern design, garden furniture is one of the full landscape design elements.
Taking into account the decorative value of garden benches made of wood, you should try to choose such a model that will harmoniously fit into the environment. For a young garden or summer cottage without big trees It is better to choose the lightweight options for furniture on decorative thin legs made of metal, laconic in shape of simple shops and benches. If the garden is old and well maintained, the Provence style will be suitable - with stylization under ancient furniture with wooden decor.
Overgrown cottage plot with imitation wild natural age can decorate benches, with their own hands collected from natural material - fin, corping, slightly treated branches. Very good in such a garden will look like a bench made by an ax. Such sites should be installed in the places hidden from the eyes: Among the flowering bushes or by turning the path.
When choosing the place of installation of the bench for the cottage, you need to pay attention to the species that will open our eyes sitting on it.
It is undesirable to place a bench so that contemplate the unsightly fence or a compost bunch. Put it near the reservoir or flowerbeds, under the branched old wood.
Then the rest will be supplemented with the pleasure of the smell of flowers and the game of light on the water, the rustling of foliage and coolness in the shade.
Different types of benches can be installed on the veranda near the house in the area of \u200b\u200bthe pool or street focal. They will find applying and under a canopy in the garden. In each case, you need to adhere to the general rules of combination wooden products With the common style of the plot. How to make original Palet benches See this video:
The material for garden furniture is traditionally chosen by wood - lightweight material that allows you to implement almost any ideas. Currently, along with a conventional board and bar, you can use moisture-resistant varieties of thick plywood. From a durable and aesthetic sheet material, you can collect designs suitable for modern design landscapes and for a regular courtyard that does not have certain style features.
If wooden benches are performed in inpatient versionthen take care of protecting them from moisture. This goal can serve as a variety of impregnation and paints and varnishes. Street furniture will have to be filter or varnished once in 1 - 2 years as the protective layer wear. Such measures can significantly extend the life of a wooden structure.
In order to build it yourself convenient bench, It is necessary to make her sketch. There are optimal sizes of garden furniture that need to be observed:
These sizes allow a man of medium growth conveniently to sit, rely on the back, easy to get up. If the host complex is very different from the average indicators, the gabarites of the shops will have to choose individually. The back is usually done with a slight tilt back. Read more about Wooden bears. See this video:
The following tools will be needed for wood:
For the assembly of products of a complex shape, carbon black can be useful. They fasten the parts that are connected by the "Schip-groove" or furniture key (dust). For products from plywood, long metal studs with carvings and nuts will be used.
The simplest wooden bench will be able to make even a novice master. Such shops in abundance can be seen at the gate of village yards, they can be put near the beds, in a bath or utility room. They do not differ in sophistication and decorativeness, but the functions of garden furniture can be performed quite successfully. For the manufacture of the bench, the board is required 2 - 2, 5 cm thick and a width of about 20 cm.
Bani or vegetable benches make easy
According to the drawing in Fig. 1. You need to cut the following parts:
Spin the corners on one side of each point of the apron, as shown in the diagram. Measure from the edges of the element for the legs of 2 - 2, 5 cm on each side at the top, cut the groove with a length of 10 cm. If desired, cut the holes for the pens on the seat of the bench. About how to make a shop with your own hands, look at this useful video:
Product assembly to produce in the following sequence:
Processing the surface of the product with a large sandpaper to remove burstages. If necessary, paint the bench to your taste.
Another simplest project is presented in Fig. 2. For the manufacture of a bench with a backrest, it will take 2 log cuts about 25 cm long, backrest and seating boards and 5x5 cm bars for backrest racks. If you want the seat to be slightly higher, you can take 4 log segments or timber and lay them on each other, tumping the wrenches.
The back is screwed by self-drawing on the reverse side.
The manufacture of the bench is very simple. So that there were no nuts and heads from nails on the surface of the product, to produce parts and glue. The back can be screwed with screws from the wrong side so that they do not drill the board through.
For the manufacture of the wrenches, wooden rounded rods are needed (a thin handle for garden tool is suitable). In the log, drill 2 holes with a diameter of equal dummy thickness. Focusing on their location, make response recesses on the bottom of the seating. Work must be done very carefully so that when assembling it has not been to customize parts of the bench. For more information about making a bench with a back, see this video:
Lubricate glue a piece of wood for the wanking and insert it into the hole on the log so that a small fragment remains outside. Its length should be equal to the depth of the removal drilled in the seat (Fig. 3). Lubricate the woven with joinery glue and put on them the board. Make the same thing with another log segment.
Cut the bars of the desired length for the manufacture of backrest racks. Screw to self-testers to the ends of the logs. In the upper part, drill 2 holes for fastening the back. The distance between the holes should be less than the width of the board. Screw the screws through the holes in the table. The finished bench can be painted or covered with transparent varnish.
Make garden furniture on the proposed project is quite simple. The basis of the design is the plates of porcelain booking or concrete and a thickness of 2 - 2.5 cm thick. If you wish, you can replace the same thickness with light plywood. Wooden bench with a back, will be mobile.
Stylish bench is distinguished by an interesting back.
The following details will be required:
Phaneur will have to be pre-cut into fragments of the required shape and the magnitude. If boards and stoves are used, then this step can be skipped. On how to make the original shop do it yourself, see this video:
Drill 2 holes equal to the edges of the distance at the top of the square parts of the legs. Customizing the long details of the seating as in the diagram (Fig. 4), make 2 holes in them on each side. One end of each rod turn the nut and put on the puck. Alternate long and square elements, assemble a bench. Split nuts on the other side of the stud.
Such a bench can be used without back.
But for convenience you can do it. For this, 4 boards of 15 x 65 cm secure on the screws from the rear of the rear of the bench. In between them, incur or plant the crossbars on the shelves.
The raw tree is a wonderful material for garden furniture. The shop, similar to the Throne of the Forest King, fits perfectly into the landscape imitating wildlife. It is very appropriate to such seats near rocaries or old trees with a spreaded crown in the preceded corner of the garden. Rustic benches with trimmed wild stamps for picnics or mangals from sandstone and boulders are well combined. Original shop in this video:
The easiest option of the seating from the logs is a monastic bench. For its manufacture, the unprocessed log needs to cut in half along. From short segments make legs, laying them with a drink on the ground. Long halves of logs fix on the shelters from above, spil up. To make a bench not a dirty clothes, it is better to choose hardwood logs and dry them well before assembling furniture.
To remove the offering and sowing, the plane of the sleeve is necessary to smoothly handle the plane and process the sandpaper.
The complicated version of such furniture is a bench made of logs, with your own hands supplemented with a back (Fig. 5) to attach the back, we need wooden or metal supports and crossbar. These details can be made of thick wood branches, bar, steel strips. The mount is produced on a screw of sufficient length or on nails.
Examples of original benches of wood
The logo from the logs can be made and otherwise (Fig. 6). On the photo, the grooves are clearly visible in the upper part of the thick log painted in half. In the grooves you need to insert a board with a thickness of at least 4 cm or a beautiful sawing of the tree trunk. If desired, the exclusive piece of furniture made by your own hands can be supplemented with a back. Supports for her need to attach to the inside of the legs on smooth surface. The crossbar can serve a thick branch or the same spoke of wood, as well as for seating.
The set of tables and benches will be convenient at the dacha in the dining area or near the mangala (Fig. 7). Make this easy, if you know the main techniques for the manufacture of wooden log cabins. To begin with, 2 are approximately the same in the thickness of the log. A axes need to push semicircular recesses (bowls) at the ends of the logs. The size of the cup will depend on the diameter of the log, which is selected for the seats. This trunk needs to be cut along. Example of chopped furniture in this video:
In the middle of 2 lower logs, it is necessary to outstretten 1 cup to install a transverse support. It may not be a very thick log. Its length should be such that the ends are given by the side surfaces of the trunks.
For the base of the table, you need logs shorter. Their length is approximately equal to the desired collar width.
In the middle of each trunk, it is necessary to extrude the excavations suitable in size to the thickness of the cross. Put the cuts of the cut with cups down, covering them the transverse log. From the boards to make a tabletop and consolidate it with nails. To put on the souls intended for them.
This is the most creative occupation. Finding in the forest or on the shore of the reservoir beautiful snags and polished fins, you can make furniture of amazing beauty (Fig. 8). Each such a bench is unique, because it is difficult to find 2 identical branches. Therefore, solutions options, how to make a bench from Korjigi, may be a lot.
The main thing for all such products is one thing - the fitting of the parts is performed right on the place under the already finished legs, seats, backs. Branches should be harmoniously intertwined, forming a design that will endure the weight of an adult. Self-tapes and nails can be used to connect non-standard parts. The most reliable is the connection to the sewage and glue. Where it is desirable for a dense fit of pieces of construction, squigs can be pushed with an ax.
The most original benches can be made of branches and fins.
Such decorative benches can be used even to decorate the premises in the style of Chalet or Rustic. They are wonderful combined with a wild stone finish. Harmonious they will look in the garden among flowering bushes or near the reservoir.
A variety of bellows models that can be made with their own trees, endlessly.
The main thing in the manufacture of wood furniture is the thoroughness of fitting parts.
Then the finished product will be neat, without distortion. Processed by moisture-proof impregnations and varnished or paint, any seat in the garden will last for many years.
Good afternoon, dear masters. In this post, I collected for you the 15 most interesting ideas of furniture made of untreated wood and corigracy that can be made with your own hands. I think many will be interested, someone will turn inspiration, someone will do everything with their own hands. Most furniture is one way or another is made of wood, but it is the raw material that transmits the most possibly atmosphere of the indian, the proximity of the Earth, nature, forests.
1. Written table and chair from coriation
2. Coffee table from the root of the tree
3. Shop from a weakly treated tree, with rounded edges
4. Furniture table and chairs from boards
5. Stool from knitting wood
6. Wooden coffee table from flights
7. Claw with a table of branches
8. Shutter from drunk wood
9. Big Tree Table
10. Table with branch shops
11. Lacquered root furniture
12. Furniture from Stumps for Street
13. Table of Spike Trees
14. Wooden deck bench
15. Country Table of wood
Thank you for your attention, I think many will be interested. Successes in creative affairs!
Every newly dacket dreams not only about bringing high yields Garden and garden, as well as about comfortable, and tastefully equipped with a recreation area on his summer cottage! "Good worked well - Good rest!" - Here is the motto of the "right" dacnis. However, in our age, high costs are not every amateur to relax in the country can boast a bottomless wallet, able to pay for the designer services and expensive material!
Yes, it does not need! Very often, it happens that acquiring, you get a very valuable "construction" material as "garbage"! Do not hurry to upset because of the presence of debris, carefully inspect the "disaster dimensions", rate the situation, count the eye - what and where it is possible to apply! Special attention is paid to various snaps, roots, wreckage of boards, bat tiles and various sized stones. Before you, a whole klondike all kinds building material! Take - I do not want!
Consider more available in your garden "Building Material":
Look at your snags - don't you see that this snag will serve you in the form of an intricate a fabulous bench, and those are folded in a certain way, will give you the most exclusive garden chair in the world! And the whole bunch of branches will be able to imitate the table, bench and even canopy over it, which, over time, can be poured with grapes or curly fragrant pink bushes! Handsomely? Well, and you thought to take these all "values" to the dump!
By the way, the modern designers for the construction of such a building in the garden of any "Rockefeller" receive several millionchors for work as a reward!
Proceed all the branches selected by you, roots and snags by the veneer;
Treat all blanks with antiseptics.
Naked hands Furniture, naturally, do not collect, so in order to assemble your own furniture for the cottage You will need such materials and tools:
Note that the costs of varnish, paint and screws will differ significantly from the new-fashioned "special" materials!
The perfect option for the dacket, colliding with the cutting of the old garden and the landing of the new one! Nic extra cost not required! The material is present in all diversity.
Fantasize ...
You will need:
Electro saw.
All elementary and easy!
First we clean the stump from the bark. Then we learn how to work with the electronics - drinking the seat on 2/3 diameters, then from top to bottom - the back of the chair, the exclusive country chasso is ready!
For the chair-throne, drew out the outline of the tree in the form of the letter "P" and neatly cut down from top to bottom to the outlined seating. The width of the biters and the back should be from 5 to 10 cm, depending on the dimensions of the stump. Then he should cut a bit of Bilz, to the desired height, to sit down on this chair, it was convenient to reconstruct your hands.
Show fantasy and give each such garden chair Interesting form. In conclusion - do not forget to carefully treat your chair by a verse, varnish or the desired color paint - so the throne will serve much longer!
You will need:
Pniped from the cortex, you need to make a uniform neat speech. To this drink, with the help of epoxy or liquid nails, glue a mosaic ceramic fragments from the dishes. Special talents can even lay out small mosaic compositions, which will make your stump-stool especially exclusive and irresistible.
An interesting solution to the natural lighting of your garden at night will be glowing stories. To create them, take:
Carefully treat the stump speaker, impose a florescent onto a drink or put the LED. Carefully impose on top of the plexiglass, with already drilled holes around the edges. With the help of self-sufficiency firmly attach the design to the panya. That's all - the stumps glowing in the night are ready!
Furniture from logs is distinguished by special strength and durability. Tables made from logs, shops will serve faithfully not to one generation of your descendants! The main thing is to correctly process this material.
Do not forget always and everywhere cleans the logs and miscellaneous billets From the wood from the bark! This is one of the collaborations of the durability of the product. Again, do not forget about various antiseptic substances that can destroy various microorganisms that contribute to the rotting of wood.
Check out the finished bench or table carefully, give the smoothness of the surface. After our most fantastic ideas are pronounced in reality in the form of luxury furniture items, do not forget about the protective coating layer for wood - paint varnishes.
When choosing varnishes and paints, give preference to those designed for outdoor work. Since the wood quickly absorbs in itself and varnishes, and paint, then in front of the coloring again to turn the wood with a verse with a mourn, Olifa in several layers, or still varnish and paint, but also in 3-4 layers. Now your furniture composition will flash not one dozen years old!
And that before where you can find a log, then the answer is simple - forests, gardens, parks ... Material and places are many, the costs are minimal, the effect of such a graceful furniture!
First, - you made it yourself,!
Secondly, they saved on expensive building materials.
No garden will do without a bench: it is on it that you can admire the villain scenery and nice to spend time in a good company. Of course, a beautiful shop can be bought, saving your time. However, the product created by its own hands will be unlike others and will be the subject of your pride. The participants of the forum "House and Dacha" tell how to make ordinary and at the same time original shops.
From a simple ...
Participants of the Arin and Sveta2609 forum and Sveta2609 made the shops simply and rustic, using materials that are easy to find: stumps, pieces of timber, veil and varnish.
Polishan presented her work - original, which will decorate anyone country plot. One of them is a seat and a back of uneven wood, and therefore the product looks natural and picturesque. Pieces for a bench serve wheels of the old cart.
In order for the bench to the lacquer, it was going to go along with the owners and their guests, the wheels are fixed by small woods. The second product is no less amazing and simple in the manufacture: the usual board was put on unusual supports from burnt wood.
Another forumchanin smastershell shops and a coffee table from the old shed lack of a neighbor. The uncircumcised boards was going to throw away, and the resourceful owner found them a worthy application: dried and smastering a corner, which looks harmoniously in a country house.
Marsha also showed himself as a sheltering mistress and needlewoman with an extraordinary fantasy. The farm found a heavy semicircular board and a rectangular plank. Her craftswoman saw, and built a graceful bench near the entrance to the house: legs - from birch logs, back - from woven IV branches.
Sergey290 Picture of your product spied in the store. As it should be a creative person, the idea was reworked and improved: instead of a small shop with slim legs, a good-quality bench turned out: legs - from a bar 140x90, the back and the seat - the floorboard, which has a spoken part with the planer.
Anti-Killer used a stump from the old tree, which for a long time everyone interfered with the plot, rot and ported the view. A couple of hours of working with the daughter-assistant - and here is ready cozy corner: With the stump they removed the bark, they kicked out of it from the population of the goat, it was impregnated with an antiseptic, and from above - a wood-protective agent. To the pni known the old sex board, crowded and sharply.
The fungi tables made from hemps borrowed from wood reserves, and table tops from the remaining sleeps after cutting. Since the time of the device, the bedrooms remained small pebbles, which have a picture of the picture. The only acquisition for the money was varnish. The result was beautiful and functionally.
Dgusepe shared another easy and fast in the manufacture of a bench: the product is from mutually intersecting bars. Fasteners with self-draws also intersect, which creates increased rigidity. Bench dimensions: Seat height - 450 mm, depth - 450 mm, backrest height 50-60 mm, backing angle - 75 degrees, length - arbitrary.
If the length of the bench is more than 1500 mm, it is necessary to increase the cross section of transverse bars of the back.
The member of the MTNGR forum made a bench out of thin logs: the curved let the armrests and the back, which made the legs, and from the big board - the seat.
... to complex
Nafanya came up with more complicated product. The base made 100x100 mm from the bar. The sharp corners on the front cut off the saw and "piled up" the grinding machine. At first she planned to fasten the bars at an angle, but then decided that it would be noticeably and ugly. Therefore, I received otherwise: I collected the base with the help of a running drill of 8 mm and meter studs M8.
The most difficult turned out to be to save the vertical. First, the forumchanin climbed one passing hole. In the end surfaces, in the spill places, the cutter made a recess for the washer and nut. On one side of the hairpin, he put on the puck, spun the nut and ruined the hairpin. Take her through all the bars, I caught the second washer and nut, then put the second hairpin.
The washers and nuts need to be dried into the base body, otherwise when installing a bench on a flat surface will play, and it will not be possible to put the saddle.
Nafanya's seat first secured with wooden planks, and then began to decor. The seat rounded around the edges, on the back with the help of melk, drill and jigsaw made the pattern, the inner edges of which was treated with a mill, creating a figured chamfer. The back attached to the base with two plates, cut out waveguide. Then he picked up the comfortable angle of tilt the back, noted and secured with screws. The bench was covered with toned protective composition and varnish for yachts.
Andreevev made a shop from lumber residues. We needed: Circular saw, screwdriver, fuganok and hammer with nails. The product can be done in just a few hours according to the granted.
Diddim offers to make a bench on metallic frame: Disassemble a chair, cutting it to the frame in half, pick up suitable metal pipes (or use the frame of the second chair), brew spacers to get a width of a 120 cm shop, from planed boards make a seat and a back and paint.
DSP1 bought profile and rails, stuck with pebbles. Bench dimensions: Front span - 180 cm, radius on the front - about 220-250 cm.
The sequence of manufacture: remove the soil, fill the foundations of the Tumb (approximately 70x40x30 cm). On the fresh concrete, we put the first row of the island of the cabinet - 2x0.5 bricks, around the stack of four rods of the reinforcement (Dmitry - 12 mm) so that the inter-axis edge between the jumpers is about 30 cm after their welding.
We expect while it grabs. We post a few more rows, we impose a profile on the edge. Dmitry brought profile 40x25x1.5 gas. Checking in terms of the level, weld the arc. We bandage twice on the end of the fittings (WAB57) slices so that it is then to close the stone. Superior cut, arcs can be painted. We make a test landing and close up, inserting a box. Flower box remove both samples inside. Krepim Rake, scoring in the center of the circumference of the peg. According to their end, layout on small screws.
According to the materials of the participants of the Forum "House and Dacha"
