The bench is simply necessary in the country or the household plot. The main purpose of its purpose is a place to relax. He who knows how to work, should be able to rest. Someone simply sets the bench, and someone creates an interesting corner, which certainly has a full-fledged rest. You can just relax, but you can just enjoy the environment and from the results of your work. There are many ideas worthy of attention. Of particular interest are the usual designs that can repeat any person familiar with the tree and owning a primitive set of tools.
Everyone can imagine what kind of the most common bench is, but not everyone is simplicity and most of them stops their choice on original solutions. Everyone wants to have something that is not, for example, a neighbor in the country. Almost all daches start with the decoration of the country or the nice site, and here there are also many options. Alternatively, you can take a design site from the installation of the bench, after deciding with the place of rest. After all, the place of rest is not needed later, it is necessary now. Therefore, the design of this place should be done in the first stages of the process of decorating the country or the nucleotop area and only then begin the design of the rest of the territory.
As a rule, summer houses are very crowded with growing various green plantings and colors. Especially, there are many of them near the buildings. Alternatively, you can combine plantations with a seating area by installing the bench not far from the cottage. In this case, everything will be organically looked: both green plantings, and flower beds, and an original bench.
Two flower beds from the boards and between them bench Variants are a huge set: from the simplest, to the very wisdom. The easiest option may consist of two wooden boxes in which flowers are planted, and two boards built between these boxes. Boards must be sharp and well sandy. This design can be positioned directly near the cottage wall. On the wall you can fix a couple of the same sharply boards, which will serve as a kind of back. Instead of wooden boxes, concrete courses can be installed, which will be able to stop much longer wooden elements.
A similar design is very simple, and most importantly quickly. As for the boards, they can be purchased ready or made under the size itself, using non-processed boards. But in this case, you will have to work hard, but the bench will not cost anything, and the result will definitely please. If concrete colors are used, the boards can be fixed using metal corners. The only problem is the complexity of drilling holes in concrete. In no case cannot be used the perforator, since the vase, even concrete, it will easily split, especially if it is made independently.
You can not mount the boards, but instead of the boards put a huge log, which is not necessarily fixed, if you correctly install it.
As mentioned above the variants of the set, and they are created on the basis of real possibilities that the owner of the cottage. Alternatively, you can simply install a stay shop away from colors and green spaces. After all, it is no secret that various insects are hidden in colors and between the leaves of plants, which do not have rest, but on the contrary, make it take to leave behind the worst memories of rest.
As a bench, you can apply hollow blocks, in the voids of which processed boards are simply inserted, which can serve as seats.
To make it convenient to sit, sharp block corners should be rounded. Well, if these blocks are heavy and large. If the blocks are small, they can be coppped with studs in one.
The site can be issued in any style, but almost everyone leaves the standard approaches to solve the problem. Everyone wants to have something to have something. But not everyone knows that a new one, it is an advanced old one. Alternatively, a new, but somewhat enhanced old, is an option to use a log, as a bench. As a seat, you can use a log of large diameter, painted along. As a back, a log of smaller diameter is used, as painted along. Or a smaller barrel diameter, but cut closer to the edge. As a leg used narrow logs of the log.
Bench from the log - quickly and just The legs and seats are connected to each other with metal pins. Under the pins are drilled by a slightly smaller diameter. Pins should enter holes with effort. At the same time, half of the pin is clogged with blows on the pin, and the second half is driven by a tree blows. As a rule, they are hit without the tree itself, since traces of the hammer can remain, and with the help of a wooden backup. Such a connection must be reliable, although the mounting options are set.
In the photo, slightly higher, you can familiarize yourself with another option, in Ethno style. His organization is associated with the presence of a stone, although this option is quite realizing in the presence of a log. As a seating, a rather thick log is used, and as a leg is a part of a large diameter deck. In one and another part of the deck, the grooves under the seat are cut down. As a tool, an ax or Bulgarian is used. Alternatively, you can resort to the help of chainsaws. This is not post-Soviet "friendship" or "Urals", which have a considerable weight, and they, except that, convenient to equip pines in Siberia. If you take adjust to the chainsaw "CHTIL", then with its help you can do not such works of art.
From the logs really make a table that is simply necessary in the country. In the photo you can see the results of such actions. The countertop made of boards, and the rest of the ensemble from the logs from different diameters.
Bremen Benches Table The next bench, built in this style, has a completely original execution. Here, legs and armrests are made of branches of various thickness, and the seat from the treated, high-quality unedged board.
Another bench is made in the same style. The only difference is that the boards and branches have the opposite direction. As a result, it turns out a completely different look. As for execution, no special skill here is required. The careless end result, the more valuable. In any case, so perceive the surrounding similar approach. Most likely, people are tired of imaginary perfection and they are more likely to shrub and primitivism.
Wicker back - meet infrequent Alternatively, around the tree you can organize a platform for relaxation and install a bench.
Place for relaxation under the tree It is not at all difficult if you have a swing and a gazebo nearby. Above the bench is better to build pergola, similar to the arch. For a full-fledged rest, there is not enough pond, fountain or waterfall.
As a rule, no one decided to build a bench made of metal. IN summer period They can heat up to such temperatures that it makes no sense to speak at all. In case of cooling, the picture is the same. The bench becomes so cold that it is impossible to sit on it. But benches where the combination of metal and wood is used is the most in demand. As a rule, the frame is made of metal, which ensures high reliability of the design, and the seat and back is made of wood, which provides certain comfort.
Pipe bench If the design improves and make soft armrests, soft seats and backs, as in the photo, then such a design can compete with the most modern options Stamps for recreation. To make seats, armrests and backs are soft, sufficiently cover suitable material Furniture foam. In a similar style, it is possible to build a tabletop.
On a note!When using wood, it is desirable to leave between the individual elements of the gaps up to 5 mm. This is due to the fact that when the environmental humidity changes, the dimensions of the elements are changed.
Stylish Metal and Tree Vegetables In the process of creating a platform for recreation, you should take care that there are no sharp corners, especially in metal structures. This is very important if there are children. All elements of the ensemble, such as benches, tables, garden chairs are made of round and square pipe, flexing them so that smooth transitions come out.
Table and Bench Pipe and Board The presence of metal allows you to bend the design of any form, although it will not be so easy to do and need a special device. The presence of such features allows you to curb the design in one occasion, without applying other tools for this, such as Bulgarian and a welding machine. The main thing is to consider the design to the smallest detail. If a tree is used, then only well-processed. It is impossible to allow the wooden elements to be present sovereigns or chips.
The most popular option is benches from boards. Many fulfillment options. There are even structures similar to sofas. If you put soft pillows on them, then you can lie down.
This garden bench is more reminiscent of the sofa: with sufficient sizes and you can lie down. The design of garden furniture, based on a modern approach, are assembled elementary. As a rule, they consist of rectangles with partitions made of a thinner tree interconnected into one.
If you strain and make your fantasy work, you can build a work of art from a conventional shop, if, for example, instead of legs and armrests, install wooden wheels.
Shop from boards with back and wheels instead of the sideways - it looks interesting One of the most simple designs of the country shop consists of one board, to which the legs are fellow in the form of the letter "X". Similar shops built our ancestors, although they can be found today.
Traditional layout design Using a tree, you can build a bench in the form of the letter "P". In this design, it is very important to ensure reliable fastening of the seating and legs. Such an option involves the use of a thick board or timber for reliability. Alternatively, you can install the "on the edge" board, for greater rigidity, and for greater reliability it is recommended to secure with metal corners.
This photo contains an option where it washed under 45 degrees. With the help of a special tool, this is not difficult. If all parts are connected, then the angle is 90 degrees. If the board is fat and the seat will not be fed, the bench will last for quite a long time.
In the photo below, you can see another option. an interesting solutionwhich is characterized by increased reliability. As legs used boards of different lengths. The difference in length is the thickness of the board: each second board must be shorter. Connect the design with nails. Moreover, through one board, nails are clogged either into the seat board, or to the board for the legs.
Modern Style Bench Along with the classic approach to the process of manufacturing benches, there is also an original, although appropriate materials and tools are needed to solve such a task.
For example, out big Stone You can also build a bench if it is consolidated to secure the appropriate platform from the tree.
Bench of stone and boards If there is a bamboo from it, the seat is also made, which will take more exotic appearance.
From bamboo, and a whole Or stone.
Sitting winter will be unpleasant, but beautiful ... It all depends on the flight of fantasy. This owner has no unnecessary things or materials in the country. With a reasonable approach, you can attach any thing, and it will not be just like that in the country or lie in a dead cargo in the garage or in Saraj.
Naturally, each host has a set of tools for making stone benches, but everyone has a minimum set of tools for working with wood, especially since it is very simple and accessible tools. Therefore, it makes sense to consider structures from a tree. Everything that is done with your own hands is ultimately the subject of pride.
Design, although simple, but has a rather spectacular view due to the material used. As a leg serves a ram with rounded edges. In extreme cases, a similar timber can be prepared independently of round logs of a small diameter, sneaking them from 4 sides. The result will be the same bar. Therefore, problems with the construction of the bench should not be. From this material will be made legs benches. To do this, you should lay the sliced \u200b\u200bbars plafhone (horizontally) one on another. It is this design solution that makes a certain exclusivity in the design.
A simple shop looks interesting due to the material A bench without a back is 120 cm long, 45 cm wide and 38 cm in height. Round the face of the bar is permissible in any way. To not really strain, you can already find a ready-made, profiled timber. Although it will cost much more expensive, but it's a pleasure to work with him.
Depending on the size of the bench, it is not difficult to calculate how much a bar is required. If the timber is taken, a cross section of 70x70 mm, then with a height of the legs of 380 mm, it is enough to put one to another 5 bars. We believe: 45 cm multiply by 5 pcs. And it will turn out 2.25 m timber. Since the legs 2, the timber will go 2 times more, which means 4.5 meters of timber. A board, a thickness of 40 mm and a width of 90 mm take place as seating. Given the width of the shops will need 5 boards, 1.5 meters long. If you calculate more accurately, you will need 1.2 m x 5 pcs. \u003d 6 m boards.
At the first stage, the boards are cut according to the size. At the same time, it is necessary to round all sharp edges. To do this, you can take a rupture or simply large sandpaper and carefully process the boards. To do not particularly engage yourself, there is another option: you can simply agree on the sawmill and get a well-processed board, especially since they have all the possibilities for this. It remains only to take and cover them with varnish.
Processed boards After that, it is embarrassed for the manufacture of legs, for which the brushes are cut to the same segments, 45 cm long, after which they are folded one on another 5 pieces. The next step is the connection of the stability legs. In this case, it can be copped with metal pins or with wooden brazers. The distance between the fasteners is 7-10 cm. As a rule, such a compound is made using glue, then the connection is obtained more reliable.
Lines on which pins will be installed The pin compound requires accuracy of drilling holes, otherwise the bars will not be on the same line. To do this, it is better to use the template. In addition, the dimensions of the elements of the legs should be the same, then it will be possible to accurately place the location of the holes. For those who are familiar with drawing, roulette and pencil, will not be much difficult to do everything right.
Pins should be installed in a checker order, therefore it is necessary to note in mind this particular. The same boards are attached to the legs at the calculation of two holes per board.
If you look from a technological point of view, this is not a bad connection option, but it requires a certain skill and work experience with the tree. The compound stage can be simplified if the bars for the legs fold one on the other and rigidly connect them using clamps. Then the accuracy of drilling will be provided. Alternatively, the bars can be combined with long metal spills and nuts with washers. In this case, it is enough to drill through 2-3 holes.
Seats can be nailed to legs with nails, which makes it much easier to make all the technology of manufacturing such a bench.
The bench is made with your own hands. Stroperation remained When using nails, the hats are preferably told, because they will then rust, which is completely undesirable. For this, nails are clogged so that the hats do gripped the tree in almost 5 mm, for this you can use a copper. After that, a putty is taken, a little sawdust is added to it to suit the color, and the recesses are spun. After complete drying, the places are thoroughly sandwiched with sandpaper. So that the place where nails are not stand out on a general background, they are covered with a suitable varnish.
The technology of autopsy lacquer of wooden surfaces is quite simple, especially since it is described in detail in the instructions for use.
If there are two old stools and did not have enough fantasy to adapt them somewhere, then you can make a bench. They will only go the same and strong enough. If they are loosened, they will have to repair them. Chairs are sacrificed so that the backs and legs remain. After that, two stools, or rather what remained from them, are installed near and connect their backs with the help of the rivers of the corresponding thickness.
Bench of old chairs In order for the design to be rigid, at an altitude of 20 cm from the floor, the design is associated with the same rails around the perimeter. Subsequently, these rails will serve a footrest, and if the bottom is to sew, for example, plywood, then you can store any things.
Prayes made design After the design is enhanced and ground, you can paint it. In this case, the usual paint is suitable, which can hide some flaws of the whole design and especially old chairs. It remains only to cut the sheet of plywood, put a foam rubber on it and cover some cloth. At the same time, it should be considered the fact that the bench will mainly stand outside to the coldests. Therefore, it is better to stop your choice, for example, on the leatherette. In any case, the material must be moisture resistant.
Finishing bench A reasonable owner, any material has its value. Garden furniture can be easily made from cargo pallets. Moreover, they are not particularly required to disassemble: from one pallets the back is made, and from the other - the seat. It remains only to think about what makes armrests and legs.
That's what should happen One of the pallets is enhanced by additional bars, which are attached with the help of self-tapping screws.
Enhance the corners of the pallets After that, the timber is taken, sizes of 100x100 mm and arbitrary length, after which 4 identical segments are cut, up to 80 cm long. They are attached in those places where the reinforcement bars are set in advance. As a result, there will be enough legs, 20-25 cm long long. Self-tapping screws are used for fastening, no less than 150 mm long. In the process of work, you need to make bars to be properly screwed to install the legs of the same length.
Screwing legs-supports for armrests If after these actions fails to get absolutely smooth design, then the legs can be written at the end if the shop will not be installed smoothly.
Foots screwed The second Paletta is attached to the rear racks, and on both sides - a plank for armrests.
Almost done If there are no such plans, you can simply thoroughly treat the wooden elements with sandpaper, after which the bench just paint any paint, of any color.
Ready Product: Pallet Chair 
After hitting the official website for the first time on Casino x, you accurately remember this platform according to its unique design and big selection Activities. Experienced gamblers who know the felt in the game software, with joy become the guests of the resource. There is everything you need for a comfortable game: licensed devices, bonuses, high level Service. This is a serious long-term project that is successfully advertised on the Internet and gives a real opportunity not only to break the Kush, but also withdraw honored winnings without any difficulties.
All professional resources that make a casino X review, mark it a very impressive gaming assortment. You will find more than 450 slots from more than 30 providers. The main part is the development of NETENT and Microgaming. Basically, it is five-drum simulators of all sorts of genres: fantasy, history, plots from films and legends, fictional stories, sports, animals, treasures and, of course, fruit classics. For convenience, the top online machine guns are collected in a special section. You are waiting for interesting game mechanics:
On the official website
The web resource also paid attention to desktop entertainment and Live categories. For moving to paid rates, you need to start a profile in the system. As soon as fast registration passed, the player can replenish the account of his account. Immediately after that, you can proceed to the game on the most sought-after slot machines. Most of The devices are adapted to sensory control gadgets. On the Casino smartphone x, the mobile version is slightly different from the format on the computer. There are no functional differences: you just manage your bank and bets as on a personal computer.
Clubs Club do not have to search, where to download automata for permanent access to demomm. The browser version of the portal works around the clock, as well as its technical support. The site is sometimes updated to better meet modern quality standards. All casino guests play for free without registration can be connected to the smartphone, tablet or computer to the Internet. It is enough to click on your interesting video slippers and start a test game in Demo Coins. The results of such spins or betting at the table of roulette, the poker will not affect the real balance sheet.
If for some reason Casino x the full version does not open up the address you have familiar to you - this problem is easily solved due to alternative copies. For each client and a simple guest, the mirror today serves the most in a convenient way Log in to your office and on the page with slot machines. You are waiting for the same licensing software with a complete guarantee of particular algorithms. You will never lose your status and balance on the balance, as additional addresses with a similar interface and bonus capabilities are constantly added to the network.
You can safely relax in the shade of trees in the summer or to warm up in the sun in a cool autumn day you can on a bench made of wood, with your own hands installed in the garden. IN modern design Garden furniture is one of the full landscape design elements.
Taking into account the decorative value of garden benches made of wood, you should try to choose such a model that will harmoniously fit into the environment. For a young garden or cottage plot without big trees It is better to choose the lightweight options for furniture on decorative thin legs made of metal, laconic in shape of simple shops and benches. If the garden is old and well maintained, the Provence style will be suitable - with stylization under ancient furniture with wooden decor.
In the overgrown cottage plot with the imitation of wild natural ages, I can decorate benches, with your own hands collected from natural material - fin, corping, slightly treated branches. Very good in such a garden will look like a bench made by an ax. Such sites should be installed in the places hidden from the eyes: Among the flowering bushes or by turning the path.
When choosing the place of installation of the bench for the cottage, you need to pay attention to the species that will open our eyes sitting on it.
It is undesirable to place a bench so that contemplate the unsightly fence or a compost bunch. Put it near the reservoir or flowerbeds, under the branched old wood.
Then the rest will be supplemented with the pleasure of the smell of flowers and the game of light on the water, the rustling of foliage and coolness in the shade.
Different types of benches can be installed on the veranda near the house in the area of \u200b\u200bthe pool or street focal. They will find applying and under a canopy in the garden. In each case you need to stick general rules The combinations of a wooden product with a common segment style. How to make original Palet benches See this video:
The material for garden furniture is traditionally chosen by wood - lightweight material that allows you to implement almost any ideas. Currently, along with a conventional board and bar, you can use moisture-resistant varieties of thick plywood. From a durable and aesthetic sheet material, you can collect designs suitable for modern design landscapes and for a regular courtyard that does not have certain style features.
If wooden benches are performed in inpatient versionthen take care of protecting them from moisture. This goal can serve as a variety of impregnation and paints and varnishes. Street furniture will have to be filter or varnished once in 1 - 2 years as the protective layer wear. Such measures can significantly extend the life of a wooden structure.
In order to build a comfortable bench with your own hands, you need to make her sketch. There are optimal sizes of garden furniture that need to be observed:
These sizes allow a man of medium growth conveniently to sit, rely on the back, easy to get up. If the host complex is very different from the average indicators, the gabarites of the shops will have to choose individually. The back is usually done with a slight tilt back. Read more about Wooden bears. See this video:
The following tools will be needed for wood:
For the assembly of products of a complex shape, carbon black can be useful. They fasten the parts that are connected by the "Schip-groove" or furniture key (dust). For products from plywood, long metal studs with carvings and nuts will be used.
The simplest wooden bench will be able to make even a novice master. Such shops in abundance can be seen at the gate of village yards, they can be put near the beds, in a bath or utility room. They do not differ in sophistication and decorativeness, but the functions of garden furniture can be performed quite successfully. For the manufacture of the bench, the board is required 2 - 2, 5 cm thick and a width of about 20 cm.
Bani or vegetable benches make easy
According to the drawing in Fig. 1. You need to cut the following parts:
Spin the corners on one side of each point of the apron, as shown in the diagram. Measure from the edges of the element for the legs of 2 - 2, 5 cm on each side at the top, cut the groove with a length of 10 cm. If desired, cut the holes for the pens on the seat of the bench. About how to make a shop with your own hands, look at this useful video:
Product assembly to produce in the following sequence:
Processing the surface of the product with a large sandpaper to remove burstages. If necessary, paint the bench to your taste.
Another simplest project is presented in Fig. 2. For the manufacture of a bench with a backrest, it will take 2 log cuts about 25 cm long, backrest and seating boards and 5x5 cm bars for backrest racks. If you want the seat to be slightly higher, you can take 4 log segments or timber and lay them on each other, tumping the wrenches.
The back is screwed by self-drawing on the reverse side.
The manufacture of the bench is very simple. So that there were no nuts and heads from nails on the surface of the product, to produce parts and glue. The back can be screwed with screws from the wrong side so that they do not drill the board through.
For the manufacture of the wrenches, wooden rounded rods are needed (a thin handle for garden tool is suitable). In the log, drill 2 holes with a diameter of equal dummy thickness. Focusing on their location, make response recesses on the bottom of the seating. Work must be done very carefully so that when assembling it has not been to customize parts of the bench. For more information about making a bench with a back, see this video:
Lubricate glue a piece of wood for the wanking and insert it into the hole on the log so that a small fragment remains outside. Its length should be equal to the depth of the removal drilled in the seat (Fig. 3). Lubricate the woven with joinery glue and put on them the board. Make the same thing with another log segment.
Cut the bars of the desired length for the manufacture of backrest racks. Screw to self-testers to the ends of the logs. In the upper part, drill 2 holes for fastening the back. The distance between the holes should be less than the width of the board. Screw the screws through the holes in the table. The finished bench can be painted or covered with transparent varnish.
Make garden furniture on the proposed project is quite simple. The basis of the design is the plates of porcelain booking or concrete and a thickness of 2 - 2.5 cm thick. If you wish, you can replace the same thickness with light plywood. Wooden bench with a back, will be mobile.
Stylish bench is distinguished by an interesting back.
The following details will be required:
Phaneur will have to be pre-cut into fragments of the required shape and the magnitude. If boards and stoves are used, then this step can be skipped. On how to make the original shop do it yourself, see this video:
Drill 2 holes equal to the edges of the distance at the top of the square parts of the legs. Customizing the long details of the seating as in the diagram (Fig. 4), make 2 holes in them on each side. One end of each rod turn the nut and put on the puck. Alternate long and square elements, assemble a bench. Split nuts on the other side of the stud.
Such a bench can be used without back.
But for convenience you can do it. For this, 4 boards of 15 x 65 cm secure on the screws from the rear of the rear of the bench. In between them, incur or plant the crossbars on the shelves.
The raw tree is a wonderful material for garden furniture. The shop, similar to the Throne of the Forest King, perfectly fits in the landscape, imitating wildlife. It is very appropriate to such seats near rocaries or old trees with a spreaded crown in the preceded corner of the garden. Rustic benches with trimmed wild stamps for picnics or mangals from sandstone and boulders are well combined. Original shop in this video:
The easiest option of the seating from the logs is a monastic bench. For its manufacture, the unprocessed log needs to cut in half along. From short segments make legs, laying them with a drink on the ground. Long halves of logs fix on the shelters from above, spil up. To make a bench not a dirty clothes, it is better to choose hardwood logs and dry them well before assembling furniture.
To remove the offering and sowing, the plane of the sleeve is necessary to smoothly handle the plane and process the sandpaper.
The complicated version of such furniture is a bench made of logs, with your own hands supplemented with a back (Fig. 5) to attach the back, we need wooden or metal supports and crossbars. These details can be made of thick wood branches, bar, steel strips. The mount is produced on a screw of sufficient length or on nails.
Examples of original benches of wood
The logo from the logs can be made and otherwise (Fig. 6). On the photo, the grooves are clearly visible in the upper part of the thick log painted in half. In the grooves you need to insert a board with a thickness of at least 4 cm or a beautiful sawing of the tree trunk. If desired, the exclusive piece of furniture made by your own hands can be supplemented with a back. Supports for her need to attach to the inside of the legs on smooth surface. The crossbar can serve a thick branch or the same spoke of wood, as well as for seating.
The set of tables and benches will be convenient at the dacha in the dining area or near the mangala (Fig. 7). Make this easy, if you know the main techniques for the manufacture of wooden log cabins. To begin with, 2 are approximately the same in the thickness of the log. A axes need to push semicircular recesses (bowls) at the ends of the logs. The size of the cup will depend on the diameter of the log, which is selected for the seats. This trunk needs to be cut along. Example of chopped furniture in this video:
In the middle of 2 lower logs, it is necessary to outstretten 1 cup to install a transverse support. It may not be a very thick log. Its length should be such that the ends are given by the side surfaces of the trunks.
For the base of the table, you need logs shorter. Their length is approximately equal to the desired collar width.
In the middle of each trunk, it is necessary to extrude the excavations suitable in size to the thickness of the cross. Put the cuts of the cut with cups down, covering them the transverse log. From the boards to make a tabletop and consolidate it with nails. To put on the souls intended for them.
This is the most creative occupation. Finding in the forest or on the shore of the reservoir beautiful snags and polished fins, you can make furniture of amazing beauty (Fig. 8). Each such a bench is unique, because it is difficult to find 2 identical branches. Therefore, solutions options, how to make a bench from Korjigi, may be a lot.
The main thing for all such products is one thing - the fitting of the parts is performed right on the place under the already finished legs, seats, backs. Branches should be harmoniously intertwined, forming a design that will endure the weight of an adult. Self-tapes and nails can be used to connect non-standard parts. The most reliable is the connection to the sewage and glue. Where it is desirable for a dense fit of pieces of construction, squigs can be pushed with an ax.
The most original benches can be made of branches and fins.
Such decorative benches can be used even to decorate the premises in the style of Chalet or Rustic. They are wonderful combined with a wild stone finish. Harmonious they will look in the garden among flowering bushes or near the reservoir.
A variety of bellows models that can be made with their own trees, endlessly.
The main thing in the manufacture of wood furniture is the thoroughness of fitting parts.
Then the finished product will be neat, without distortion. Processed by moisture-proof impregnations and varnished or paint, any seat in the garden will last for many years.
One of the attributes of the garden or recreation area country plot - Bench sitting on which you can read the book alone or, on the contrary, spend a few fun hours in the circle of friends. How to make the usual bench be comfortable and at the same time turned into an element of the garden decor? The output is simple - a bench for giving done with your own hands. Only their own exclusive creation will fully satisfy personal aesthetic requests.
Before you have a sketch or drawing of the product, you need to think about the place of its installation. Production material depends on it. For example, in the old garden with big branchy trees, a wooden bench in a wrought framing is good (as an option - a log product on a stone base), and in a young garden - an easy, even openwork bench in a romantic style.
A small white bench is highlighted by a contrast against the background of dark green albinding
If it is placed in a quiet secluded corner, near or surrounded by blooming flower beds, it will be a great place for privacy and recreation, where you can spend a few pleasant minutes alone with you after the workout "workout" on the beds.
Old brick wall, a bench from a snapped tree and flowers look mysterious and romantic
Often, benches are an integral part of the veranda, arbors, summer platforms for a picnic. In this case, there must be several products weathered in a single style. One example is a garden table with two bears on the sides, after which the summer evening can be arranged a family tea drinking or fighting board games.
Deliberately rude and comfortable wooden design - table, two benches and armchair
The bench is better to install in such a way that the view does not open up the neighboring fence or garage, but on the pond, flower bed or. The surrounding picture should please the eye, and not remind you that you need to fix the car or update the paint on the gazebo. It is also appropriate to arrange benches on the playground, by the pool, near the front entrance to the house.
Bench at the pond surrounded by flowers and greenery - a great place to relax and ponday
One of the successful places is in the garden, near the beds. It is better if the bench will stand in the shade, for example, under a shistful crown of a tree or under a canopy, as it is designed to relax from physical labor - koking, weeding, watering or harvesting.
Holidays in the shade of a flowering bush - real pleasure
You can consider a decorative frame: a garden bench, made with your own hands, looks good in surrounded by low flowering bushes, specially arranged flower, on a small elevation or on the site from natural stone or .
First you need to take a piece of paper and make a sketch or drawing of the intended product. Even at this stage, questions may arise: what kind of height will be optimal or how many legs should be the bench? There are general standards that should be followed during the compilation of the scheme:
If plans to create a product with a back, should be determined for yourself how the back will be attached to the seat. Depending on whether the laptop is laptop or not, the legs are planned: they are fixed in the ground in the ground.
The legs of the bench is easy to fix: you need to dug pits desired size and fill them with cement mortar, lowering wooden parts there
According to the drawing, you can estimate how much the material is required for work. Usually, this kind of product has a minimum of financial investments: there are always many wooden billets left from the construction of a house or bath, fasteners (self-tapping, nails, bolts, brackets), paintworks for wood processing.
If you collect residues wooden products and billets from all over the cottage, you can come up with an unusual model
There is a road and required tool. If the main material for the manufacture will be a tree, you should cook: plain, saw, jigsaw, hammer, sandpaper, roulette and pencil.
Never lose, choosing a tree - soft, malicious in the processing and at the same time durable, capable of serve not one ten years. From wood you can create elements of various shapes and size, curly inserts, volumetric and miniature parts.
If there are difficulties with drawing up sketch, you can use the finished drawing of the garden bench.
All parts are cut according to the dimensions in the drawing.
This bench is traditional for urban parks, similar specimens can be found in river stations, near theaters or shopping centers - in those places where you have to spend some time waiting. Advantage this option - Easy to prepare parts and speed assembly. The work will require thick bars for support (3 large and 3 smaller), bars or boards for seating and backrest.
The color of the details can be changed using the impregnation or lacquer of a darker shade
This model is portable - it can always be rearranged on another, more convenient place. So that it always stood smoothly and did not swing, when installing the supports, it is necessary to monitor the exact location of the parts - even a small inconsistency will cause a skew of the product.
At the end of the work - and this applies to any wood from wood, which is on the street, - all wooden parts need to be treated with a special impregnation from mold or to cover varnish, also containing protective components. The treated wood is not amenable to moisture, longer serves and looks like a new time for a long time.
This option is more solid than the previous one. The bench with a rectangular seat and the same back looks great on the background of the house built from any material - wood, brick, stone.
Collection of armrests and backs of the classic bench bench
For a variety, you can change the color, pick up a shade, closer to the dual buildings. The back of such a bench is a real find for lovers to dream and embody their ideas in the wood. Straight vertical bars can be replaced by placters located crosswise.
On such a bench can easily fit several people
The upper horizontal crossbar looked nicely if it was covered with elegant carvings or color ornament. Armrests and legs can also be figured - but it all depends on the desire and skill of the master. To make such a bench for summer cottages, you will need only a few evenings, and you can enjoy the rest on it not one year.
The garden kit for resting the whole family consists of a convenient table and two fixed benches.
A comfortable and practical table with a pair of benches will be useful at any dacha.
All major parts (table, shops) are collected separately, and then collected in a single whole with 4 lower bars - 2 on each side.
The assembly scheme of the whole set
The table is a tabletop with legs installed crosswise.
Table assembly scheme
The benches are going to easily, from bars or boards of various lengths.
Lovel assembly scheme
At the last stage, first fix the benches - to give the design of stability, then the table, exactly in the middle.
Initial assembly - buckle
A simple look, but a comfortable table will be a place to collect family and friends in the evenings - for communication, evening tea drinking, relaxation.
Such a table with benches can be placed right on the lawn
More detailed drawings and photos of this project you can download.
Tree - traditional, "warm" material for the manufacture of benches, so products from it are so different. Instead of processed on machines, bars can be taken natural material Natural forms - and not just a bench, but a real masterpiece.
The original bench is made of large parts of sawdust and processed logs.
It turns out that there are also stone benches, but they are rather valued for functionality rather, and for aesthetics. You want to sit on the stone product only during the warm season, but you can constantly admire it.
A small stone bench harmoniously fits into the floral landscape
Exquisitely and elegantly look, but only a professional blacksmith can create a bench for the garden with their own hands.
An forged bench among the violent mess looks more than appropriate
Combined shops and benches, built of stone and wood or decorated with objects from textiles, pillows look interesting.
Small pillows in pink and white gamut, neatly laid out on the bench, make a garden corner cozy and home
Today everything. We hope that you have found something useful for yourself. If you have questions or wishes - please please in the comments.
Bench - an integral attribute of the country area or outdoor territory. Often there will be no place for one, but for several benches. One in the yard, the other in the garden, the third at the gate. Bench with your own hands - probably the easiest and useful projectwhich can be done in the country.
Beautiful wooden bench texture will look harmoniously in any garden, especially if used for a bench is not just boards, and all parts of the tree that are available to you in the garden.
In order to make a simple bench, do not need special skills or expensive tools and wood at the cottage - one of the most affordable materials.
We hope these beautiful benches will inspire you to your own sample.
To begin with, we offer to master the simple design, which is easy to make and which has good stiffness and stability.
Bench of wood. Preparation of materials
In order to make a bench, you will need:
If you are planning to make a long bench with your own hands, then make sure your boards that you have prepared for the seat will not be fed under the weight of people sitting on it. And if the boards really begging, it can be corrected - you can assemble another support and put it in the middle.
Each item needs to be seized, so that after resting on the bench you did not have to pick up the spares from different interesting places.
Remember also that if you want to wear a bench, your supports should be at least 40cm longer.
Garden bench. Performance
After your details are cut in size and ground, you can start assembling. To do this, it is better to use a self-tapping screw, but if you do not have a screwdriver, the bench can be knocked down with nails.
It is important to screw the crossbars at least two screws to each support as shown in the picture. And the more distance between the self-drawing - the tougher there will be a design.
Now it remains only to paint and give paint to dry.
And that's what you can get. You can give a bench another species without changing the design. Just take more roughly treated wood, and it turns out a completely different thing! Although it is more constructively, its differences is minimal, and it is done in the same way.
But even if it seemed to you too complicated, then for you there is a design of a bench with a back, which is made with a hacksaw and a hammer literally in a matter of hours.
All you need is six boards of the same thickness (preferably at least 40mm).
Its scheme is elementary simple.
After all the details are cut in size and polished, it is going in a few minutes!
Only holes under the self-tapping screw is better drilled in advance so that the board does not split when assembling.
It looks like a bench concisely and modern. 
And it is not surprising, because there is nothing superfluous in this design. Each element of the design is absolutely necessary and at the same time - is minimally sufficient. Your backbone bench can be done in any way, we have shown only two easiest.
If you like working with a tree, you may want to expand your skills and add new original parts to your bench.
If you irrigate the stumps at the cottage - consider that you have become a happy owner of a unique material for the next one of your benches that you make your own hands.
Often, those of us who love and know how to do something with their own hands, just shy to spend their time on this "nonsense" - it is more important in time to accurate the garden.
The pleasure that you get when you work on your project bench for cottages, will deliver you really happy minutes. 
And those surrounding, which are puffers, - why you are busy with a frivolous business, will be proud of your bench that you have done yourself, and everyone tells everyone that you are so unexpectedly talented.
And we are confident that these successes will inspire you to try new ventures, because the benches made by your own hands are always practical and more comfortable than ordinary standard.
