Table for cottage plot - Not just the object of the situation, this is a ritual place where all households are invariably. In the summer, go to the house to drink a seagull or lunch, no one seens desire. In the fresh air and appetite is better, and the food is tastier. In order not to carry furniture from the house for gatherings, you can make a street table for giving with your own hands, at the same time taking care of the benches.
table for giving with a built-in bench
The summer table does not imply the complexity of the design, so it will not be even distant from the carpentry and creative work of personalities with its assembly. We will imagine you somewhat very simple and at the same time. original ideas Its creation, perhaps something from the proposed by us, will be decorated and your site.
Cottage
Table for giving with your own hands: Interesting ideas
Conclusion
Photo Gallery - Table for giving with your own hands:
table for giving should be durable
Street furniture is subject to serious tests, so it is necessary to make it from durable materials. Specifically for the table you can take:
Tables from the latter look especially interesting. But first things first.
set of furniture for meals on the street
Selecting the material, pay special attention to wood. Board board - Return and use, in our case, not everyone is suitable. Pliable and easy to work coniferous breeds, alas, do not fit. In addition to the fact that they need a special impregnation, because too fires, so also the resin allocated by them will spoil the tablecloth and dishes.
Necessary elements need to be sought among hardwood blanks. On the table top you need to dial the boards with a thickness of 30-50 mm. For consumer strength, they are stuffed on the frame. The legs in the design can be saddled with straight or x-shaped. It is important to proceed well all the details so that there is no danger to drive the opposition, wiping the table. Communicable processing of finished product with protective impregnations.
folding wooden tableiK In the country, do it yourself
In order to make the table "on the century", cover him with varnish, and do it, which is called, do not regret the brush. The composition must be literally launched in wood, and this will be possible only if you are slightly warming it in a water bath. Varnish coating make three-layer.
round tableiR and benches from stone will serve not one dozen years
You want to make a monolithic design, affecting the imagination and creating a special mood for the trapes - try working with a stone. The table of this type can be created with your own hands or buy a finished product. Shops offer granite and marble options in a wide range. There you can choose to choose a bench with a similar material.
to inspire life in old table, just perform tile facing tiles
It will be expensive to cost it, but if you really want to have such a luxury in the garden, like a stone table, try to keep it. Lay out the foundations of shops and tables yourself. To do this, it will be quite good:
stump table lined with stone
These materials will be much easier to enter into the overall concept of the garden and combine them in already existing buildings. At the worktop, seats and backs, it is quite possible to take artificial stone. View from this, the composition will not lose.
Those who are "friendly" with iron and has a welding machine at hand, may be interested in a variant of metal furniture. Products are obtained elegant and aesthetic, with openwork decor inserts. Metal table It will also be necessary to protect against early destruction. This is done by priming metal before final painting.
round table for giving with a stone countertop and curly metal legs
Forged tables will satisfy the needs of respectable owners, but they are unrealistic to do them with their own hands. Similar structures are ordered by professionals. For forging, the conditions for forge are needed. However, given the fact that products of this species can be miraculously combined with a tree, stone, glass, you can only purchase forged base for the table, and make it a tabletop yourself.
stylization of the table and chairs for the fungal glade will create a kind of highlight in landscape design cottage plot
If you firmly decided to work on creating a country table yourself and are ready to make it a non-standard, look at the "unnecessary" things available in each shed. Perhaps among them there are objects that can become consumables For creativity.
No less practical option for the country table, along with wooden, metal, rathang, stone products, is the national team from all sorts of "Solyanka". This creation will become a multicolor "character" of your garden and will never be ignored. What to make it? You will not believe! Source materials will serve you:
set of bar
Take a sheet of paper and try to depict a circular ornament on it. moroccan style. Increase creation to the desired size. Make it quickly will help xerox.
The resulting workpiece put under the glass and draw the line with copper contour. Leave to dry for a day or a little less. Recommended drying time The manufacturer indicates.
it is enough to decorate the side pieces of the bench and chairs with wheels to get the original garden furniture For dacha
Now a turn of the painting of the glass marked with stained in paints. Here the main thing is that the colors are smoothly located inside the site allotted. If you have never worked with specific paints, it makes sense to stretch on a separate piece of glass to understand what quantity they need to be taken for high-quality painting of fragments. The painted painting should also be carefully dried.
The finished glass can be additionally decorated with elements drawn by copper contour.
The barrel cover cover the white paint, which will hide the tracks of rust, and go to the preparation of the main part of the table top.
table for the cottage from vazanka wood
Metal part flower Standthat will serve as a supportdesk for the cottage created by their own hands, it is necessary to primed, paint acrylic paint in the color of copper and partially register.
After granting will be ready, proof the places of contact with the glass window seal. It is necessary for its best fastening.
Now the final stage. Collect all the parts together: put a glass countertop in the lid and waters the composition on the stand.
It can lunch at this table and is not very comfortable, but drinking coffee in the evening coolness, it will be very nice.
decorating the usual foam mosaic, you can get the original table
After construction dacha house You probably have at least a few pallets, on which a packaged brick or building mixtures were brought. You do not even suspect what a wand-cutter for the decoration of the cottage. With their help, the table will be ready for a few hours, and the view it will have such that it will not be ashamed not only in the garden, but also in home interior. At the same time, notice, you will not even incur special financial costs.
table for cottage from pallets
Table for giving, made with your own pallets, can be constructed in several ways. For example, for the most simple option You will need:
mobile table for cottage from pallets
First of all, make a grinding pallet. At the first stage of the removal of the coarse layer, use a coarse sandpaper, fine-grained will be required for final processing. If there is a bodice of Bulgarian, in the configuration of which the grinding wheel is provided, use it instead of sandpaper rolls. This will speed up the preparation process.
master class manufacturer table for giving with their own hands
Turn the pallet and attach minor swivel wheels to the bottom. This is done using ordinary screws. For greater fastening reliability, put under the last washers, which can be removed from similar screws used for work with metal tile. Do not neglect this advice. Rounds of wheels have enough big holesAnd the screw without lining will not be able to qualitatively deposit the part to the wooden surface.
phased process of manufacturing table
Now it remains to open the finished product with a wax-containing antiseptic. If you want to highlight the tree structure, use a transparent composition. To give the color it will take a veil. You can stylize a table:
A low wide table will be appropriate on the veranda, in the attic room, the interior of the bath.
without additional processing, the table will serve at least two seasons
If you want to make a summer seating area more comfortable, make not just a table from pallets, but a whole kit cottage furnitureSupposed by its stationary accumulated benches. Such a kit can be made portable and, if necessary, move it from the mangala, say, to the pool or pergola.
bright table from pallets for the whole family
A creative option for the country situation will be the pallet, transformed into a worktop and equipped with vintage legs, remaining from the old chest, table, closet. This item needs to be isolated by contrast.
You can use such furniture in the bedroom, gazebo, on the terrace.
vertical skulls allow you to place various items
"The coil is heavy by itself, but it is easy to construct a lightweight option. tables for cottages and again, do it with your own hands »
The coil from under the cable is also excellent material for creating a country design. Look at her - the same almost ready-made table! A little decor and it is ready to use. The easiest way to decorate the coil can be twisted twine. For this, it is enough just to wind her trunk tightly. The upper design of the design is grinning and opened with varnish. If you wish, add a functionality product. Set the vertical speech circumference. They can also be reeded by rope. With the advent of the cross, you can store the necessary items under the table.
table of coil with mount under an umbrella
The coil is heavy in itself, but it is easy to construct a lightweight version of the table for giving and again, to do it with your own hands. You will need only the top disk from the product that will appear as a countertop. The frame frame for its installation can be made of metal.
If in the shady garden there is a suitable height and strength of the stump, then it is also, with the help of a coil disk, can be converted to an improvised table. This idea will be good not only for the playground, it is rational to use it and when organizing a relaxal corner for adults. Peeling in half the wooden disk, it will be possible to collect original chairs, which can also be put on legs-hemp. Get a good garden headset.
the table from the coil can be decorated with any pattern.
Why not? Such a brutal option can be the decoration of the barbecue area and even the living room. Works - everything is nothing. We find an old thick log, soak it with a verse and align the lower part, giving the product stability.
table on the wheels of stump
No less easy to manufacture and attractive in design Mobile table of hemp. By the way, his functionality can be expanded if not be lazy to sew a foam-wheel seat on it, which will allow a slight movement to convert the design to a comfortable pouf.
Not in the dacha deficiency and keyword. Of these, it is also not a problem to quickly build a comfortable design desk for giving with your own hands. Collect flat base and secure brushing bars in the tabletop belt screed. Put all this's legs and enjoy communication with primitive nature in full.
table for living room cottage from the old log
Do not rush to get rid of old tires. They can be made of the magnificent landscape decor of the extended functional: it is not easy to use the table as a table, and the pouf near it is not only like a pouf, but to equip the place within them for gardening inventory, for example.
the table and chairs are made in a single designer style from old tires
Pour the tires in an acceptable color for you, dry, fold the column, bonding the elements with silicone sealant or other suitable composition.
Now make a tabletop and seat. To make the first to do well from durable plastic or cutting into their tree. For puff, also cut the plywood disc of a slightly smaller diameter than that of the tires, glue the foam rubber to it and cover the cloth. Removable parts are ready.
mobile table from old welding with wooden table top
Found in the bunches of Babushkina welded? Sumptuously! Transform it into a mobile table warehouse. Bottom with wheels, and for the top we collect a worktop from the boards. Drinking boards in size, we collect them together on transverse strips, the length of which should correspond to the welding diameter. It will help the table top to hold on the spot, and not to move aside and do not turn over with the slightest load. Inside the improvised table will be enough space for the organization of a minibar.
By the same principle, you can convert empty boxes, barrels, etc.
original table with metal big wheels instead of legs and built-in benches
As you can see, collect the table for giving your own hands - the occupation is very fascinating and absolutely unemployed. Here, even newcomers do not have to be afraid, to spoil something, because, it is originally unsuitable for direct use objects and elements. Try your hand in unusual yet for you. Perhaps the final results will be an incentive not to dwell on the achieved, but go further. From the submitted materials you can do many more unusual and necessary things in the country's dacha.
(1
estimates, average: 5,00
out of 5)
The table is in every home. At the cottages and in private homes, it is customary to install street models that can be moved on the territory and place in arbors and on the verandas. Wooden street table for giving do it yourself on the designed drawing or acquire a ready-made model. The product is performed from high-quality material, adhering to the basic rules of manufacture.
Tables can have any shape and size. For their manufacture use different material: Wood, plastic, metal. Types of models depending on the materials:
Before you purchase a ready-made model, you need to consider the following:
What makes the table on the street with their own hands, everyone chooses for the availability of available material.
Tables for cottages Street from wood are performed independently with minimal cash costs. First, it is necessary to prepare the drawing. To build an original product with optimal sizes, the form of the table top and the frame invent yourself. Standard tables have a size of 178x95x77.5 cm. Preparing the drawing, you need to stick to these numbers. The following tools and materials will be needed for work:
Mittens and safety glasses are used from protection.
All desktop elements are made of solid wood. Details must be even, so each of them is thoroughly aligned and grind. Then processed by antiseptic means. Oil waterproofing compositions can not be used. Despite its defensive qualities, the substance has increased flammability and highlights nasty smellwhich will not destroy long. For additional protection The material is covered with a lesing antiseptic. In addition to protective properties, the tool gives the product special decorative qualities.
All prepared boards for the table top and the feet of furniture are attached to the frame base, so it is starting to collect the table for giving with their own hands. The assembly is made on a flat surface:
Installation of amplifiers will make the design more durable and massive. The table turns up with the legs, cross-reinforced amplifiers to the center. To preserve the free space, their corners are spilled. Several curved amplifiers nourish the sidewalls. They must correspond to the shape of the worktop.
Any wooden designwhich is used on the street is susceptible to rotting. The sun, rain and other unfavorable conditions affect it badly. Protect wooden furniture And it is possible to extend its service life using:
Polyurethane based film is the most popular, but over time it wear out, loses its properties and spoils appearance Products. If oil mixtures and repellent solutions are used to protect, they must be updated regularly.
To make more comfortable stay in the recreation area, gazebo or dining area in the garden, you can make the table to give your own hands. It will come in handy for work: transplant flowers or sow seeds in a box for seedlings, disassemble herbs or mushrooms at the table. Optionally buy plastic products in the store if you can assemble yourself country tableiR from wood or girlfriend.
Building tables for cottages necessary workAnd the use of wood as the main material will help make it durable and easy.
First you need to determine the size of the product depending on the area on which it is planned to be placed. In a gazebo or recreation corner, there should be enough space so that you can move freely around the table, put chairs or benches. Bulky furniture badly fits into the interior of the arbor or summer kitchen, so the main requirement for it is harmonious sizes. But the wooden table installed on an open lawn can be large enough to accommodate everyone.
For the manufacture of furniture in a gazebo or kitchen, you will need:
Figure 1. Fastening the wooden table legs.
All parts of the future furniture subject before the start of the assembly must be treated with grinding or plans and emery paper. Details prepared for table should be smoothly stung from all sides.
The manufacture of the table begins with a frame assembly for the table top. This is a design of 2 longitudinal and 2 transverse boards, on which legs are fixed. The legs can be made from the usual bar, a little sorry by the planer the lower end of each segment and removing the chamfer. If you purchase accurate balusters for stairs in the construction store, you can create a table with curly legs for the sebbi-chic style interior or Provence. Optimal height - about 75 cm for dining table.But in the furniture with another appointment, it can be chosen at will.
When assembling the frame, it is necessary to consider that the countertop should be approximately 3-4 cm for it throughout the perimeter. Therefore, if you purchased ready-made shields for a tabletop of a certain size, the frame must be calculated so that its length and width from one external angle to another were 6-8 cm less than the same tabletop dimensions.
The assembly is made in several stages:
Figure 2. Widget strengthening scheme.
Mounting countertops to the base can also be made different ways: on the corner, corner rail, self-tapping screws. In the first case, from the inside, the podstolia and countertops will need to fasten the corners so that one side of them is on a leg or frame board, and the second is on the tabletop shield. For mounting on an angular rail, you need to screw the segments of the bar 3x3 cm on the inner sides of the frame boards. Tabletop fasten on the rail, screwing the screws through the holes in Broke. The length of the self-samples should be chosen so that they do not pass on the outside of the table top. The easiest way is to drill holes with front face Shield and screw the screws through them into the end legs.
After the assembly, all visible traces from screwing the screws to sharpen and clean the skin after drying. Eliminate cracks and other defects on the surface of the parts of the table in the same way. Cove the finished product with furniture varnish in one layer. After drying, varnish pollute him with a small eyebrow and carefully remove dust. Apply 2 more layers of varnish, giving dry.
Back to the category
If the table is not needed daily, but only from time to time is used, it can be made folding.
Figure 3. Desk pattern with cruciform legs.
For such furniture, it is not necessary to purchase an expensive tree, you can do with undergraduate means and make it from wooden pallet. Besides him, you will need:
Strengthen such folding table (Fig. 2) can be right on the wall wooden structure or gazebo. You can use an additional shield on which you can spend work tools.
For the manufacture, the pallet with carefully polished surfaces is required. Fasten one side of the loop on the slats adjacent to the wall or shield and attach the pallet to the vertical. To hold the tabletop to screw 2 ry-bolts into it and shield, fasten on the rings chain or durable decorative cord.
To hold the countertop in a vertical state, when the table is not needed, it is necessary to fix the short cut of the chain or loop from the cord in the middle of the floor. On the shield in the appropriate place to screw the screws with a ring or hook.
What could be better than summer holidays on your own dacha? Indeed, the popularity of this kind of rest is not only not reduced, but also attracts more people with its availability. Cottage for many of pricework With beds and greenhouses turned into a full-fledged place of rest, a full culture is formed in society. dacha rest. A, agree, what kind of rest without comfortable and comfortable furniture? Cottage has already ceased to be a place where all the rhocked out of the apartment bears, and the exhibition of cottages requires full-fledged functional furniture created specifically for giving.
The choice of furniture for the cottage, of course, will not be much difficulty, given all the variety of furniture that manufacturers offer. But besides the trivial purchase of such boring interior items, there is another way out - independent manufacture of country furniture.
This approach to the arrangement of the country house will not only allow you to save money, but will bring a lot of positive emotions. If you like to do something "do it yourself", then independently making furniture will help you realize your creative deposits, enjoy working with a tree, and the result of the work done will become useful and necessary in the farm. You can rightly be proud of the result of the work done, because there is nothing better than seeing the thing you created personally. If you already tanned the idea independent manufacture Dacha furniture and firmly decided to try themselves in this matter, then, for sure, you are now tormented by many technical issues. But first things first. Let's try to conseen all the questions exciting you on 2 large groups: "what to do?" And "how to do?".
The answer to the first question is, in fact, the most important. This is the area of \u200b\u200bstrategic planning. You should not take for the work that you will not be able to perform, otherwise, instead of pleasure from labor and excellent result you get another headache. If you do not have special skills of work and special tools, should not be taken for a very difficult job.
The indispensable attribute of the country house is a large wooden table with a set of chairs. A large comfortable table, which would be able to gather all family and friends will never be superfluous - this can be said, the basis of a set of dacha furniture. It is its creation that can be done first.
Now it is the turn to answer our second question. And first and first should determine the choice of material for the future table. Naturally, a person comes to the cottage to relax from the city bustle, to be a bit in nature, so in our table you will refuse all artificial materials that will be applied in modern furniture. Our table will be comfortable, beautiful and environmentally friendly, and the most eco-friendly material is, of course, a tree. It is from the tree that it is best to make a table for giving with your own hands, because in addition to ecology, the tree is also very convenient for processing. After selecting the material, it should be focused on creating a project desk. To create a table can use ready-made design solutions Or a few hours of time to create your own original design project. Alternatively, you can use a simple table design, shown in the diagram.
After selecting the table model, you should calculate the need for materials to create the table: the number of boards, bars, fasteners and paints. The required materials, of course, better purchase with a small margin. Before starting work, you must get all necessary tool, preferably electric. Your tool list should look something like this:
The assembly order will look approximately as follows. First of all, countertop boards are trimmed and prepared. They can be installed closely or leave a distance of 3-4 mm, which is somewhat simpler. Freshly treated boards to two brushes with self-drawers or special furniture bolts, while the head of the screws should be recessed into the tree. For the manufacture of cruciform racks, cut the ends of the boards under the desired angle, the docking of the boards is performed in half the board. To select the docking grooves, we carry out the limiting grooves of the propulsion, and the unnecessary tree is chosen by the chisel or a milling mill with a cutter type "Barrel". The collected supports are securely fixed to the tabletop, after which we measure the required length of the longitudinal rib ribbies. Ready and treated rigidity is desirable to secure on furniture self-drawing, which will allow it in the future if necessary to adjust it. The finished product is desirable to cover with a natural vehicle on aquatic or oil basis.
If you have your own land, it can be furnished beautiful furnitureSo that it is convenient not only for the performance of horticultural works, but also for resting the whole family or a large company. Qualitative cottage accessories can cost quite expensive. The maternity owners would like to offer a scheme for which it is quite possible to independently make a garden table with your own hands to get strong and reliable furniture. Carefully read the information presented below. She will help to understand how to make the table in the country with their own hands.
1
2
3
To construct the country table with your own hands, you need to take the minimum amount of materials and tools, moreover, most of them are quite accessible, and there is almost in every home. So, what should be prepared in advance:
1
2
3
4
5
6
1
2
3
4
If you plan to construct a wooden table to give your own hands, then you can offer the following scheme of action:
If you have a little material left, you can use it to construct wood benches with your own hands.
Outside, they can be put on the table or under the canopy to extend the service life. You can arrange finished furniture based on your wishes and skills. You can decorate the thread table for giving, made with your own hands (photo on our website will help catch inspiration).
1
2
3
If you wish, you can make a table for giving with your own hands using another type of material - logs. It also features environmental cleanliness and ease of processing. With its use, the street table for the cottage will be created according to the following scheme:
Experts make high-quality objects with their own trees, connecting individual parts by self-draws. Such an option is also acceptable if you are going to make a wooden table for giving, take it to the note. The shops can also be constructed from logs when you have dutchritals.
To top, I would like to note: so that the garden tables do not lose their attractiveness over the years, they need to properly care for them, in particular, to protect against precipitation and hide under a canopy.
By the way, the canopy itself is quite simple enough, it is enough to use the most primitive means of hand, for example, blinds from the shower. They need to be copped together so that they form a dense canopy, under which precipitation does not penetrate. If the canopy is not allowed to be possible, it is better to move the furniture to the house.
