House, design, repair, decor. Yard and garden. Do it yourself

How to make a mobile table on wheels with your own hands in a small apartment, do not fit a lot of furniture. The more valuable becomes a table that can be used for different needs, for example, for a laptop or computer, which, if necessary, retracted into a journal or dinner table IR. It is such a mobile table with you today and customs. It is a tabletop, with legs on wheels and shelf. You will need from materials 2 carpentry shields of any breed of wood - one thickness of 1.8 cm, the second - 2.5 cm 4 furniture plastic wheelchair graziness 6-60 2 types of screws - the first type of size 4.5x35 mm, the second - 7.5x60 mm Wooden plugs to screw glue On wood Furniture lacquer from the tools Electrolovka Milling mill, the grinders of the screwdriver, which can be used and as a drill. It will be good if it is adjustable to drill the depth of three types of drills - the first type of diameter of 4.5 mm, the second - 7.8 mm, the third - 10 mm Clamps of the Corolon line and pencil. What parts need to be cut and their dimensions you need to do: a table top 120 cm, wide, width - 50 cm made of 2.5 cm boards. In principle, you can make a detail of any other size that you will be comfortable. The shelf is 83 cm long, 41 cm wide from a board with a thickness of 1.8 cm legs in an amount of 4 pieces. The length of the legs is 62 cm, and the size of the section - 5x5 cm 4 The upper tsargi - the front and rear must be 76 cm long and a width of 7 cm, and two side - 34 cm long and 7 cm wide 4 cc - front and rear should be 76 cm long and 4 cm wide, two side 34 cm long and 4 cm wide. 4 front and rear fasteners 73.5 cm long and 2.2 cm wide 4 lateral mounting plates 31.5 cm long and 2.2 cm long and fastener width litter from the board thickness 1.8 See how to cut down and prepare parts for a mobile table on the shield make the markup of each part. Electrolzik freeze them. Regarding the legs - since the cross section of the legs is 5x5 cm, and we have a thick shield with a thickness of 2.5 cm, then not four blanks, and eight. Then glue them, closing the clamps at the time while the glue dries. How to cut the kings, make hidden spikes on the ends and round them with a skin. Sizes of spikes for the upper Tsargs are 1x1x5 cm. For the lower - 1x1x3 cm. The kings are cut off by a mill, but if you do not have it, then drank shallow-hacking from four sides. Then fasten the kingu clamp and chosen with a hammer to select unnecessary. Dutching the Tsarg in the legs of the mill cut out the grooves for the spikes of the CARG. To find out where to cut, attach the king to the right place and circle a spike pencil. Drinking in the legs of the grooves for the Tsarg, then in the center of the groove, make a cross-cutting hole with a diameter of 7.8 mm. From the outside of the groove, you will drive the hole with a drill with a diameter of 10 mm. The depth of the resulting hole must be 1.2 cm. In this hole you climb the screw of the screw. The preparation of the hole for the screw regarding the shelves - how to cut it out, in each of its corner, make a cut in size 4.5x4.5 cm. Drill holes in the mounting plates with a drill with a diameter of 4.5 mm. Attach them to the inner sides of the Tsarg screws so that they are flush with the edges of the CARG. Collect the table without fastening the items to check whether all the details are suitable for each other. If not, bring them to mind. If yes, then go to the next section. How to assemble a mobile table on the wheels for a small room, wake the shoes of the grooves of the legs and insert the side tsarps in them. In order for the connection to be durable: 1. Attach the desktop of the desktop two vessels, the distance between which a little longer than the length of the disconnection of the feet-tsargi 2. Set the connection of the Tsargi-legs between them 3. Wear the pegs in the interval between the disconne The kings pressed against the legs very much 4. Leave the detail in this position until the glue is dry. In the same way, insert the front and rear tsarps in the legs. Screw with screws, the dimensions of which are 7.5x60 mm, legs to the kings. You remember that we did in the groove of the legs of the hole. How to screw, insert the plugs. Skill all the details, then check out. When the lacquer dries off, again skill the details and cover them with varnish. When the second layer of varnish is driving, screw 4.5x35 mm screws and shepherds and shelf to fixing plars on the kings. Turn the table and screw the wheels. As a result, such a desk should be obtained.

Serving table You can make your own hands using boards and perforated metal corners available in building stores. The final product will stylishly look, perfectly fitting in modern kitchen. And if you ever tried yourself in something like that, for example, did, then this project will not seem difficult to you.

Note: Since perforated corners can be any length, you have the right to make a serving table convenient for you, height and sizes. These parameters largely depend on what purpose this object will be used. If, for example, as a coffee table, it will be lower. But if you plan to equip where the island, there will be a serving table, then it should be higher and more.

Required tools and materials:

- 4 corners 38x38 mm, 79 cm long (for vertical angular racks);

- 6 corners 38x38 mm, 53 cm long (for short edges of the shelves);

- 6 corners 38x38 mm, 90 cm long (for long edges of the shelves);

- 2 shelves 90x53.5 cm, 26 mm thick (in this case, from glued board);

- Countertop 120x60 cm, 26 mm thick (gluedboard);

- 4 furniture rotating wheels with a braking mechanism;

— 4 wooden Bruck 7.5x10 cm, 35 mm thick for mounting wheels;

- chalkboard for cutting 30x30 cm thick 26 mm;

- metal hacksaw;

- bolts, nuts, washers and spring washers;

- connecting plates;

- tool for twisting bolts and nuts (for example, socket key);

- a shaped mill with a rounding nozzle of 6 mm;

- drill with the necessary nozzles for screwing screws, drill 3 mm;

- a circular saw;

- impregnation for wood;

- screws 25 mm and 50 mm;

- nozzle on a drill for drilling holes 90 mm;

- clamp, smooth rack;

- fine-grained sandpaper;

- chisel;

- Furniture fittings.

Serving table with your own hands: Step-by-step instructions

Step 1. Cutting Corners

Cut the metal for the selected sizes to the future table. For convenience, you can fix the corners of the clamp before cutting, and place the knob of the hacksaws at a slight angle to the plane of the corner (as in the photo).

Note: Vertical racks can be made of another length.

Take short horizontal parts of the table (corners of 53 cm long). Each corner on one of its plane (side) retreat from the opposite ends of 40 mm. Make in these places incisive until the middle of the corner (fold at an angle of 90 degrees). Having made an incision from each edge of the corner along the rectangular fold, remove the resulting pieces of 40x38 mm. This is necessary in order that when contacting short and long horizontal parts of the table was not an adhesive, on which a wooden shelf will be unstable.

Step 2. Assembling Card Table

Collect the framework of the table, screwing the bolts for long and short horizontal corners to the inner sides of the vertical corners. At this stage, do not tighten tight nuts. Under the top shelf (where the tabletop will be attached) screw the connecting plates to vertical stands - two per rack. This will allow the design to be stable while working.

Step 3. Style Alignment

At this stage, check the perpendicularity of all angles. Measure the diagonal - they should be the same. Now you can tighten the nuts tight by fixing right shape Frame.

Step 4. fit countertops and shelves

Most likely, for the serving table, which you plan to make your own hands, you will not find in the store shelves and countertops of the desired size. Therefore, to customize their sizes will have to be independently. To do this, make measurements, apply the cutting line and use the clamp at the right place to the smooth rail. Please note that the rail should not touch the cut line, and be from it at a distance on which the saw from the edge of the tool is placed. Check again everything. Now make the desired cuts.

Step 5. Rounding edges

With the shaped cutter round the edges of the table top. Skill with shallow emery paper. Color the edges of the edge impregnated for the appropriate color tree (in this case, it is a nut).

Note: If you chose unpainted boards for the manufacture of a serving table with your own hands, you can paint them at this stage with the treated edges.

Step 6. Fastening boards

Center the countertop about metal carcass. Drill holes 3 mm drill in places where you need to screw the screws 25 mm. Drill and screw the screws from the bottom of the shelves.

Step 7. Fastening wheels

Make in bars for wheels with a chisel of a hollow with a depth of 2 mm and a width of 3.5 cm along the long edge of the bar (see photo). One side of the corner should be hid in it so that the bar perfectly sticks to the lower shelf. Attach the bars to the shelf 50mm screws. Connect the wheels to the bars.

Step 8. Fastening board for cutting

Back to the table of the table from two adjacent edges of the tabletop 30 cm. In this place, the nozzle for a drill drill a hole with a diameter of 90 mm.

Note: Dumpless circle Do not throw away, and screw off the bottom side for cutting. Insert the dumping circle into your place and see how the cutting board rotates on the table top around its axis.

Cover all the wooden impregnation surfaces that can be used to treat surfaces in contact with products.

Step 9. Finishing work

Now is the time to equip a mobile table with convenient accessories. Attach them on the side or bottom of the table top. In this case, a paper towel holder is used, a glass holder, chamber holder, bottles opener and two metal handles for towels. Under the propylened hole in the tabletop, put a bucket for food waste.

Well, the serving table is ready for your own hands!

About comfortable mobile furniture, which will make comfortable stay in the kitchen, in the living room, in the yard, dreams every mistress. Therefore, the serving table will become a great addition to the home setting. This functional subject will help solve several tasks:

• Temporarily play the role of an additional work surface in the kitchen.
• Will serve as a stand for the decor.
• Will turn into coffee table In any place convenient for you.
• Delivers shift dishes to a banquet table.
• It will help to serve light drinks, snacks, treat something tasty. After all, no matter how you load the surface and the shelves of the table, delivering everything on the wheels to the right place, you are nothing to the tip, you will not feel severity.

The main advantages of this type of furniture are functionality, ergonomics, high mobility.

Serving tables make natural wood, MDF, plywood, metal, glass, plastic. You can choose the product model for any interior direction. As for the manufacture of tables with their own hands, it is used primarily wood materials, sometimes they are complemented by metal elements.

As a rule, mobile tables are a small bunk design, complemented by wheels and handle. For greater security, and the comforts of the shelf products are equipped with sides, and also complement the various baskets, stands and special fixtures for placing bottles. Thus, a small surface can accommodate the required amount of dishes, glasses, dishes, napkins, etc.

Grasp the manufacture of a wooden serving table. Even if your carpentry experience is not enough to create an elegant carved design, you can still evaluate the advantages and conveniences from a simple, concise, neatly made tool.

Wooden serving table

Such a serving table on wheels will be useful in modern apartment, in the country, in the courtyard at home. Its manufacture does not take much time, it will not require special professional skills. List of materials, drawing and detailed description make easy work.

The design of the table traditionally consists of two surfaces. Their square is enough to accommodate breakfast for two people. Swivel roller wheels will easily move the design, and metal knobMounted on the one hand will help conveniently control the movement of the table. Bright red color will create good mood And invite to treat.

Materials and tools

Take care of the acquisition in the specialized store of the necessary materials:

• 50x100 mm board to create a frame.
• Board 25x100 mm for two table tops.
• Wooden rails 25x50 mm - to complete the edging of the tabletops.
• 4 roller furniture wheels on a metal basis.
• Massive metal handle.
• Screws for fasteners.
• Nails.
• Putty.
• Primer.
• Paint (in the canister).

From the tools will be useful: circular saw, electric drill, set of drills, pneumatic hammer, grinding machine, kitchen, pencil, roulette. In order not to hurt while working, use special devices: protective glasses, headphones, gloves.

Start work with cutting parts for serving table. Use a circular saw.

• 4 blanks of short sidewall tabletops in length of 32 cm;
• 4 blanks of long sidewalls tabletop 93 cm each;
• 4 legs with a length of 78 cm;
• 2 short strips of lower table top 32 cm;
• 18 slats for surfaces of the upper and lower shelves - 42 cm;
• 4 Long end strips of 93 cm.

Attention! Before the start of the assembly, polish the surface of the parts used in the design to remove burrs and roughness. In the finished form, this work will be more difficult. Use grinding machine.

Prepare the work surface for assembling table. It must be smooth. Clean this place from pollution.

Sequence of processes

1. Start by assembling the frames for the shelves of the serving table. From parts of 93 and 32 cm long, assemble 2 identical designs. First prepare holes for screws. Expand it at the base so that the screws of the screws did not protrude above the surface of the part. Apply car glue on the connectable places. Tighten the strips of 5 cm screws. Use 2 screws to each connection. Part of the glue that will perform on the surface of the joint place must be immediately removed. Hipped in wood or dried glue will not allow quality staining.
2. Ready-based tabletop bases, connect with the installation of vertical racks (78 cm). How to make items correctly, shown in the image below. To attach legs, drill holes from the outside, apply glue, screw screws.

So that the connections were strong, the details were tightly fit to each other, secure them with clamps until the adhesive dry.

1. Now you can proceed to the formation of the upper and lower countertops from the prepared slats with a width of 10 cm (18 rolls of 42 cm long and 2 to 32 cm). We put on the upper frame of 10 planks. In order for the distance between them to be the same, you can use the chips of the board as a stencil. Folding the planks to the frame on the nails and glue.
2. Similarly, we set the boards to the lower base. The first and last (between vertical racks) are stacked short strips of 32 cm long.
3. Install (on nails and glue) Facade end thin strips, closing either boards of both tabletops.
4. Start K. finishing work. Putty fill the irregularities and holes from the screws. Leave the table to complete drying.
5. Collect the surface of the table to remove the excess putty. Wipe dust.
6. Apply a coating layer on wood.
7. Proceed to staining red products acrylic paint. Apply a substance on a dry surface. In order for the color to be smooth and saturated, color in two or three receptions.
8. When the paint dries, attach to the bottom of the table (on screws and glue) roller furniture wheels. And to the end upper Yarusa - metal handle.

The original spinning round coffee table with stands for books and magazines is a very popular option, and it is quite possible to make it yourself. Such tables were very popular for another 20 century, and years later, they are often decorated with living rooms. How ?

The table on the wheels is very convenient in everyday life, since if it is necessary to move it, you do not need to be overshadowed, but you can simply easily roll it into the right place of the apartment.

For the table is not massive, but a fairly light structure, it needs to be equipped with wheels, which will be hidden under the base.

This design is very convenient because it allows you to move it without any problems anywhere, even if it is a canopy of books and magazines.

Materials and devices

To make a table yourself, you will need:

Since it is despicable to manufacture this product, it is desirable to strictly adhere to step-by-step instructions.

Back to the category

Preparation of details

To assemble the coffee table, it is necessary using a jigsaw and hacksaw, prepare the following parts:

Dimensions small table For kitchen kaoles.

• 1 round item, the diameter of which is not less than 55 cm, (future countertop, its size is chosen at will, but it is better that its diameter is not more than 750 mm);
• 2 semicircular parts (as a sample - a circle with a diameter of 55 cm), their width is 265 mm;
• round blank with a diameter of 55 cm (it will be the base of the table);
• rectangular blank: height 71.5 cm and width 55 cm (this is a central partition that fastens a tabletop with a base);
• rectangular billets the following parameters: 245 at 230 mm, 245 by 350 mm, 470 per 245 mm;
• 8 billets of rectangular shapes - 6 at 19 cm and 4 parts - 9 by 9 cm.

Back to the category

Process assembling product

1. On the cutting table section (on sides with a width of 55 cm) and in the center of the countertop and base, using a drill, drill holes for the tongs (use the stopper to avoid drilling the blanks through). The gap between the tongs is no more than 10 cm.
2. At an altitude of 35 cm and 47 cm from different sides of the central partition of the table, too, make holes for fixing 2 rounded shelves (in their smooth surface should also prepare holes for tongs).
3. Place the tongues and connect the entire design to one unit, look carefully, whether all parts are connected smoothly.
4. Attach vertically rectangular blanks (the height of which is 35, 47 and 23 cm), mark the zones of their fixation and do on their cuts in the tabletop and at the base of the future holes for the holes for the tongs (all the product should be disassembled). In the rounded shelves, drill through the holes for fastening the upper and lower blanks, placed right one above the other, using a tongue.

While the sheets do not miss glue, since it is quite difficult to make the product for the first time. Collect all the components on the tongs, look carefully, everything is done correctly. Then you need to disassemble the table.

1. Collecting a fully product, start the bottom: Fasten the base on glue-coated sheets on the central and lower partitions, then 2 rounded shelves, the upper partitions and completion of the worktop. Up all the desktop elements, use a wooden hammer.
2. Wait a bit to make the glue.
3. On 8 blanks of a length of 19 cm to drink ends at 67 °, so it will be possible to assemble from the blanks of a smooth octaigrated figure. Treat all ends with glue, close them with each other, slightly push and leave dry. In order to avoid displacement of elements, stick to their external edges sticky ribbon. (for example, greasy tape).
4. Then you need to turn the table and glue the resulting octage from below to the base of the table - it will turn out the base. When the glue will die, remove the adhesive tape.
5. Now attach the wheels. They are joined by screws to the base of the product inside the octahedral product, make sure that they are not seen from under the base, which, in turn, should not interfere with the table to move. Control the height of fixing rollers can be due to the thickness of the supports to them. Please note that all 4 wheels are easily spinning and hurt behind the base.
6. Plug the ends of the elements of the product with a furniture edge.

In conclusion, the coffee table can be original. Exist various methods Decor, for example, mosaic, decoupage, cracker, painting, etc. Also to taste the coffee table can be decorated sea \u200b\u200bshells, mirror elements, wood, etc.

A variant of decorating countertops with a decoupage is widespread. After its execution on the table top you need to apply at least 2 layers of varnish. When each new layer is driving, it is necessary to handle the product with a skin - it is necessary, in order for the coating from the varnish is absolutely smooth and smooth.