Warranty and post-warranty repair of AEG gas speakers, Electrolux, Zanussi.
Service partnership with a federal online store RUSKLIMAT.
GWH 285 ERN Nanopro gas column - production of PRC. Hydraulic control with an ionization flame control ( electronic system gas control). Control overheating and removing combustion products (exhaust) is performed by a separate thermal sensor located on a burden. The power supply of the electronic unit is carried out from one element LR20 with a voltage of 1.5 V. Power item must be used only alkaline. Salt elements are intended only to demonstrate the operation of the device and even can be found, the bay electronics. GWH 285 is very convenient to operate, easily repaid, but does not apply to long-term instruments. It consists of individual nodes: a gas, water, electronic unit, cigacity of ignition, microswitch automation, heat exchanger (combustion chambers or radiator).
The weakest node is a heat exchanger. It is made of fine copper without any coating and quickly goes. When operating in very raw rooms, when installing directly above the bathroom and late cleaning from soot (recommended once a year), corrosion and thermal destruction of the heat exchanger occurs. Further exploitation is impossible.
Replacing the heat exchanger of special difficulties does not cause. For dismantling protective casing It is necessary to remove the control knobs, the screw is located under the left handle.
Remove the flexible eyeliner from the exit of the heat exchanger, we unscrew the heat exchanger from the water node, remove the burrier and remove the heat exchanger (up).
Then we install the heat exchanger through the top, we set the burror, fix the heat exchanger with zerd and screw, input and water output.
Now the heat exchangers of Tula production appeared. They are made quality, of thicker copper and with heat-resistant and anti-corrosion coating.
The replacement of the original heat exchanger on Tula is somewhat more complicated. Tula heat exchanger is made according to the same size, but with "Russian accuracy". It is necessary to slightly adjust the burrier and the heat exchanger itself. Includes wires for fixing the heat exchanger in return for regular brackets, but better stocking of a soft copper wire for fixing the heat exchanger. But all the same, the Tula heat exchanger is better than the production of PRC (thick copper and heat-resistant coating).
In the absence of ignition and lack of characteristic cotton, you must make sure that the column is enabled (the button on the front panel is pressed), then replace the battery. If the battery is suitable, it is necessary to call the thermal sensor on the burrier and make sure the automation switch is performed. To do this, it must be dismantled and manually turned.
Check is easier to produce from the connector, which is connected to the electronic unit. If the microswitch is defective, then you need to check the water node. If there is a water leak on the inclusion rod, then the failure of the automation switch is inevitable. The folder body is collapsible, inside the microswitch is installed, which can be repaid.
When a water node breakdown, the column will not turn on. At the entrance to the water node there is a shallow mesh filter, many transition holes, all this is exposed to bad water and clogs.
Repair is made by replacing rubber seals and membranes, it is natural to change the entire node better.
In June 2017, Remkomplekt of the water assembly of the production of N.Novgorod appeared. As part of Remkomplekt rubber rings, membrane, lubrication. Remkomplekt can be purchased from us.
The breakdowns of the gas node met a few times, mainly when the water was supplied to the gas unit during an erroneous connection.
Gas node is not repairable.
Electronics rarely leaves them, even in the case of the bay with water. Most frequent breakdown Located with strong cotton during the spokescape of the column (when the water is turned on). Most often it is because of the migration candles.
Candles of ignition are absent in the supply since 2015. There are candles with very similar installation sizes from gas boiler Electrolux GCB Basic.
Replacing GWH 285 Ern Nanopro candles on candles from the Electrolux GCB Basic boiler is possible. Imprints are minor.
When operating a column in a wet room, cotton occur almost always. Another common malfunction - when the flame flashes and the ignition occurs, but then the flame goes out after a second, then the process is repeated 2-3 times and then nothing happens. This electronic unit does not see the ionization current and, accordingly, does not see the flame. This repair is made by substitution of obviously good parts, from the beginning of the block of candles (they are most often guilty), then the electronic unit. Tightness disorders occurs due to the extension or corrosion of the heat exchanger or the wear of the sealing rings of the water node. Determination of the place of water leakage does not cause much difficulty.
Spontaneous population column usually occurs because of the heat exchanger of the soot and the scale. The problem is eliminated by complex cleaning. The population column can occur with a good column. This is usually the correct functioning of the gas control system. With a weak pull in chimney, not a complete removal of combustion products occurs, the burrier overheats, overheats and the temperature sensor of the gas control system and the thermal sensor turns off the power from the electronic unit. The column goes out and again it can be turned on after cooling the column. Weak thrust may be due to a chimney block, hot weather, winddrop, etc.
Very often to blame the owners themselves. Install the column in the bathroom, without providing, air inflows. In one hour of work, the column must be burned 1.5-2 cubic meters. Gaza to burn 1.5-2 cubic meters. Gas need 16-24 cubic meters. air if installing in the apartment plastic windows And a good apartment door column will simply suffocate without air and go out. Very important water pressure. With a weak pressure, the column will not turn on. The duct of water is required at least 5-6 liters per minute. Automation works in the speed of water flow. The maximum temperature of water heating is approximately 50-60 ° C on the temperature at the input. Minor MIN-MAX adjustment is on the gas node.
Transfer option for liquefied gas for GWH 285 Ern Nanopro is not available. Nozzles for liquefied gas No missing.
Service of any gas column is necessary once a year. This washing the heat exchanger from soot, cleaning the burners, nozzles, cleaning the water assembly and, if necessary, replacing the water node membrane, grease mechanisms of gas and water nodes. It must be done even in the warranty period if the guarantee 2 or more years.
Descriptions of other gas columns.
2016-10-14 Evgeny Fomenko
To start the electrolyc, it is necessary that water gets into the system. For this, first of all, the crane opens and drain water slightly. It is important to view all pipe connections for leakage.
After that, the gas valve opens. At the same time, the characteristic sound of gas entering the system will be heard. After that, you can turn on the crane from which the heated water should be poured. The crane opens immediately as possible. If the water pressure is quite strong, cracking sparks will be heard in the column and the ignition sound of the gas. In order for the water heater earned, the pressure must be from 0.15 to 10 atmospheres. After a short time, the water heats up. If the column is new, water can have a slight smell of machine oil, which will happen over time.
When using a gas column, the Electrolux is not recommended to dilute the heated water cold. When turned on cold water Resistance is created for hot, the stream decreases, the column can go out. It is necessary to pre-set a comfortable temperature level and adjust it as needed on the column itself. To make water a little hot, you can reduce the flow of water. But at the same time, if the pressure is too low, the flame will automatically go out.
To extend the service life of the electrolyc gas column, it is important to adhere to several recommendations during the use hot water.
The most expensive part of the column is the thermostat. In Water heaters, Electrolux 275, 285 and 350, the heat exchanger is made of copper. It is constantly in contact with hot water, so it is formed a scale. It is not recommended to set the maximum water temperature. Optimal temperature For work 45-50 degrees.
Using the crane to the right of the display, you need to limit the water pressure in the column. This is allowed to avoid sharp pressure drops in the design.
If you know that your water is high, it is desirable to additionally install the cleaning system. Salts of calcium and magnesium, which are contained in such water, quickly create a scale in the thermostat. Installing the filter at the input to the device will extend the service life of the device.
Even when complying with all the recommendations, the scale will still appear. According to the instructions, it is necessary to clean the electrolux column once a year. It must only be performed by specialists. Employees cleaned the thermostat from scale and burner from Nagara.
Anyone gas equipment requires compliance with safety regulations. Before starting work, it is important to carefully read the official instructions.
Here are the main excerpts from these instructions:
Electrolux 275, 285 and 350 gas columns have a number of advantages compared to other water heaters models:
Of the disadvantages, it can be noted too high sensitivity of the gas adjustment handle. And the peculiarity of all gas columns is the need for high water pressure, without which it simply does not start.
If you correctly install a gas column of the Electrolux and when you use the safety technique, it will properly supply you with hot water and serves a long time. Over time, users get used to the peculiarities of gas water heaters and consider them the best choice.
There are many options for solving hot water problems. In this case, the electrolyc gas column is often used, capable of cope with its tasks for a long time even with low pressure. The equipment meets all the criteria for quality and safety, is equipped with various sensors and controllers tracking the operation of the device.
Electrolux water heaters are considered reliable and safe aggregates capable of working on both one and several water points. That is why they are successfully used in apartments, private houses, country cottages or office buildings.
All indicators are displayed on display.
The performance of devices depends on the correctness of the model selection, focusing on personal preferences and needs. Based on the information specified in the instruction manual, it should be noted that all modifications of the electrolyc gas columns differ in 5 main criteria:
To determine the option, it is necessary to study each item in detail and allocate the basic criteria for which the selection will be carried out.
At the moment, the company produces modifications of three groups, differing in terms of performance, power:
Each of the options involves work on a certain amount of intricate points. For example, low-power capable of functioning in just 1 mixer, medium-high - by 2-3, powerful - from 3 or more water points.
The aggregates with a manual control method have long been considered outdated, so gas speaker manufacturers have developed an updated version. Modern models are equipped with a burner with modulated power.
In priority - elementary management of the equipment
This aspect controls the temperature regime of water and supports it at a given level even with a decrease or increase in pressure in watering system. Selection of temperature will be carried out at an automated level.
The manufacturer of gas columns Electrolux produces several series with different species ignition. Modifications come to work according to one of the following principles:
Versions with the first way of ignition are found very rarely, more often on the secondary market. Automatic ignition is considered the most convenient, but here you will need to regularly change the batteries. Piezorozhig can bring inconvenience when turning on the gas column when the user is at a distance of a more elongated hand.
Video: how to light the flowing water heater
The gas column of the Electrolux is equipped with a 3 or 4-level security system. If dangerous problems occur in the form of a gas or water leakage, an emergency shutdown device is activated in the pipeline system in the instrument. Also dangerous to the health of the user situations are as follows:
It should be noted that the formation of reverse thrust is considered a particularly dangerous factor in chimney rooms. When selecting a chimney gas column, pay attention to the presence of an automated shutdown function in its options.
The model range of this brand is diverse as technical parametersand by the presence of various additional options. But it should also be noted many design solutions. For example, the company produces models for conservative personalities with minimalist style, this series should include a compact modification of the gas columns of the electrolum nano plus. There are more expensive variations, on the front panel of which you can install or change the picture suitable for the overall style of the room.
Laconic performance and small sizes attract apartment owners and country houses
But the most popular versions are aggregates with a display, which displays all the necessary information about the state of the device and its operation. Also, when a malfunction is detected, the error code is displayed. Operating this is a very convenient and practical option.
Italian products are in demand all over the world due to high quality, durability and safety. Among the abundance of offers, users allocate three versions of devices.
This is a flowing water heater with an intensity of water treatment of 11 l / min. and with a capacity of 19.2 kW. In the design there is a system of piezoelectric ignition with an open combustion chamber. The maximum water heating level is 68 ° C, gas control was used as a security system.
There is also an additional feature in the form of a limiter. temperature mode Warming up On the hull there are 2 main adjustment levers, so with the task how to enable gas water heater There will be no questions.
Ungregate Electrolux 275 with classic design It is sold at a price of 6,000 to 7,000 rubles.
We look at the reviews - the only inconvenience is related to the need for periodic change of batteries for automatic ignition.
Electrolux GWH 265 Ern Nanoplus gas column has a low price - 8,500-9,000 rubles, which is available to a wide range of consumers. Modification has all the necessary functions to ensure high-quality water heating.
The main advantages are as follows:
Users noted some minuses. Since the unit is collected in China, due to its malfunction, difficulties in finding spare parts may occur. Also, the power of the unit for functioning into several water intake points will not be enough.
The gas column of Electrolux 285 Nano Pro is considered a more advanced modification, since it is equipped with 4 security levels:
This version was designed for houses located in the regions where problems are constantly arising with a pressure level in a centralized gas or water supply system. The unit is not included in the classification of powerful devices, but it can function with a small water pressure indicator.
Judging by the reviews of real people, electrical equipment is qualitative, reliable, but heats the water overly strongly, even with minimum values Heating and primary high pressure. Some marked the problems with the heat exchanger.
Thanks to the average pricing policy on the device, the electrolum each consumer will be able to choose the most optimal modification not only technical requirements, but also cost. With a limited budget, experts recommend to give preference to a variant with a minimum number of functions and medium power. In order for the unit to provide the desired source result, it is enough to adjust the strength of the water and gas pressure.
Video: How to fix errors E0, E1, E2 Nanoplus 265
Drabs with hot water supply deprive us of the usual comfort. To this not happen, you can use additional features receipt hot water. One of the devoted devices is a gas column. If you learn how to use it correctly, the technique will be easy to operate. And one of the topical issues: how to turn on the gas column?
One of the most common myths, which scares potential buyers - this technique is dangerous to use. However, this prejudice is valid when using models of an old sample. Today the units are improved and safe, many of them (for example, Bosch offers) are equipped automatic protectionIn addition, the flow of fuel is overlapped in an emergency.
To know the rules for use, should be represented by internal organization. Models of any firms include all the following elements:
The hull itself resembles appearance The locker that connects to the water supply and gas pipeline. Heating elements are located in its lower part and are represented by the main burner and the stall.
How to use the gas column? The functioning of the device is carried out according to the following principle:
Before starting work, it is necessary to open gas pipeline and water cranes. Slap the gas column can be three ways.
Manual method used in models of old sample. In this case, to light up with the help of matches. Here it was necessary to perform a number of such preliminary manipulations:
The minus will be the fact that it is necessary to turn off the wick manually. It is required to master the above practical skills and prevent children's instrument.
It can be said that this is a column - semiautomatic. How to use a gas column of this type? It will be enough press the buttonTo ignite the wick in the combustion chamber. With the help of mechanical effort, the spark is converted - it turns out enough so that the molest filter caught fire. With this method, too, one must comply with a number of mandatory requirements:
In such structures there is a disadvantage - excessive fuel consumption. Bright examples of such columns are models Bosch. WR 10-2 P Minimaxx-2, Nevalux 5111, Junkers WR 10-2 PV and other options.
The ability to automatically enable fully improved modifications that are easy and safe to use even beginners. Hydropower system They offer most modern producers (Bosch, his direct competitor Electrolux and many others). The startup process is simplified to the limit.
A fully automated process has one drawback: in many houses there is a low pressure in the supply of water, and this may not be enough to normal operation of the turbine. In addition, such devices are significantly more expensive than their less advanced fellow.
An instruction on the proper operation of the gas column is applied to any purchased technique. The principle of action of most of them is identical to the above, but here the red feature should be allocated to the mandatory observance of safety.
The inclusion of the unit is shown in more detail on the video:
It is enough to understand once how to light the device to ensure a comfortable and instantaneous heating of flowing water. And then you can simply enjoy the work of this convenient heater.
Electrolux has been present on the Russian market for several decades. But earlier she was known to our consumers, mainly due to its quality household appliances. Refrigerators, washing machines, electric water heaters And the microwave ovens from this famous Swedish manufacturer have long won respect not only from the Russian consumer, but also around the world.
And so, relatively recently the company began to supply to the market, in particular, and gas columns ElectroluxThe reviews for which there are both positive and negative. Let us try and we disassemble this gas column, on the example of the ELECTROLUX GWH 265 Ern Nano Plus model.
We will try to find the advantages and disadvantages of this model, to understand the principle of work, considering it specifications and device. Based on this instruction manual, everyone will be able to draw conclusions and make up their feedback on the gas column of Electrolux, which is now inexpensive, at a low price.
Features of the gas columns Electrolux
One of the first on the market was the ELECTROLUX GWH 275 SRN model, the reviews of owners and specialists were very good, thanks, mostly, their high-quality European assembly (Spain). In recent years, the company supplies on russian market Two models: Electrolux GWH 285 ERN NANO PRO and ELECTROLUX GWH 265 ERN NANO PLUS machine gun.
Gas Column Electrolux Nano Plus
The model "Nano Plus" externally differs from Nano about the presence of an informative digital LCD display on the control panel. It displays the water temperature at the outlet of the column, there are flow indicators and the battery level level, which flashes when the gas column does not turn on when water is turned on.
The display shows errors in the operation of the gas column of the Electrolux model of the Nano plus, for example:
E0 - worked the emergency temperature sensor of hot water;
E1 is a weak battery charge;
E2 - worked the emergency flame sensor.
Principle of operation of the gas water heater
When we open the hot water faucet on the mixer, the water flow sensor automatically triggers. After half a second, the information display will turn on, on which 2 blue indicators are displayed: "Battery" and "Shower".
After a few seconds, the flame indicator will be displayed. After incorporation gas burner All indicators are glowing, except the battery indicator, which now simply shows the level of their charge.
When you stop using hot water - close the crane. The duct sensor overlaps the gas supply to the gas burner of the column, all indicators are disconnected. Only error codes may be displayed in the event of a malfunction of the device.
Electrolux Nano Plus Gas Column Display
Like most gas flowing water heaters, the ELECTROLUX GWH 265 ERN Nanoplus gas column consists of gas and water nodes, a heat exchanger for heating water, a gas burner with stainless steel coils and an open-type combustion chamber.
Feature of the device model Electrolux Nano Plus is the presence of a copper heat exchanger that does not contain oxygen and lead made by special technology Oxygen Free..
Let's look in more detail according to the scheme, what else can be detected under the case of this apparatus.
Electrolux gas column device
2 - hot water outlet
3 - water temperature sensor
4 - LCD Display
5 - Threaded Silphon Connection Fitting
6 - water plum fitting
7 - Electrode for ignition burner
8 - flame ionization electrode
9 - Column electronics unit
10 — open camera Combustion
11 - Sensor protection against overheating products of combustion
12 - emergency hot water overheating sensor
13 - heat exchanger
14 - Gas burner
15 - stock with a water node membrane
16 - Water node itself
17 - Double Case for Battery
18 - Cold Water
19 - Gas part
20 - Pipe for gas pressure control
Gas column Electrolux Nanoglyus: Water heater specifications
The rated power of this model is 20 kW, and the capacity of hot water is 10 l / min. The column is capable of turning on at a water pressure in the pipeline from 0.15 atm., Which is a good indicator compared to the models of the previous generation of Electrolux gas columns.
The chimney diameter is 110 mm, and the dimensions of the device are very compact: 55 x 32.8 x 18 cm. The diameter of the pipes for connecting gas, cold and hot water is 1/2 inches. It is possible to transfer the work of the apparatus from natural to balloon (liquefied) gas.
In addition, this water heater has a built-in burner flame modulator, as opposed, for example, from a direct competitor - a gas column. This feature allows you to set the desired water temperature. We ask it once, and the device itself will maintain the temperature we put. The remaining parameters and characteristics are listed in this table.
Technical characteristics of the model Electrolux Nano Pro
1. The column does not turn on.
It is possible to replace the batteries or they are incorrectly inserted, observe the polarity of batteries.
2. The water at the outlet is badly heated, not hot enough.
Try to reduce the flow of cold water into the column or increase the supply of gas.
3. It smells of gas in the kitchen or in the apartment.
Probably gas leakage occurred in the gas pipeline. In this case, it is not necessary to seek the reason for the smell of gas, be sure to contact the gas supplies.
Advantages of the Electrolux GWH 265ern Nano Plus gas column:
- Compact size
- Environmentally friendly copper heat exchanger
- Stainless steel burner
- smooth burner modulation
- Low price from 8500 rubles
- famous brand
Disadvantages of gas columns Electrolux:
- Chinese assembly
- Low productivity
- narrow model range
- hard to find spare parts
Generally, gas column Electrolux Nano Plus is worth his money, despite different reviews. It is modern, possesses all the necessary functions and good technical specifications. If the Chinese assembly does not confuse you and its small performance, then you can safely buy an Electrolux GWH 265 Ern Nano Plus gas column in the stores of your city. Watch your video review.
