2017-03-07 Evgeny Fomenko
Bosch WR 10 2P gas column can operate both from natural and from liquefied gas, i.e. cylinder. Equipped with triple protection: thermoelement to control the ignition flame, gas combustion control of gas combustion, temperature limiter facing overheating column.
The model is also equipped with a reliable flame modulation system. This means that the column automatically adjusts the heating to the required fluid flow. If you wash dishes in the kitchen, and someone decided to wash in the shower, the water temperature will be the same, both in the kitchen and in the shower. The power of the fluid at the output when the water pressure changes in the plumbing is automatically adjusted.
Before turning on, according to the Bosch gas column operating instructions, it is necessary to make sure that the thrust in the chimney must be taken. It is possible to make it, bringing a burning candle to chimney or a match. If the flame deflects towards the chimney, it means that everything is in order with the burden, and you can turn on the device.
In the absence of traction, it is necessary to find out the reason and clean the air duct, or take the air duct pipe seams if a loose fit is detected. When working columns, make sure that the window or the fortage, the door in the room, where the column is installed, should not be closed tightly.
Thus, the natural movement of air and the inflow of oxygen is ensured, the unit becomes a large amount of oxygen during operation. If these requirements fail to comply with these requirements, you can choose carbon monoxide. It should also be remembered that when the operating column cannot include a fan or air conditioner, this disrupts the outflow of carbon monoxide through the chimney.
On the front panel of the device on the left there is a runner adjusting power, to the right toggle switch of the fluid volume control, overlook the viewing window. Never approach too close to it to avoid burns.
If the launch takes place for the first time or after a long downtime, a certain amount of air can be accumulated in the column pipes. To delete it, discover several times and close the crane with hot water, with an interval of about a minute, until it is completely removed.
When you first turn on, open the gas and water supply valves, open the crane hot waterTo make sure that the fluid comes.
The Bosch column has a piezoroca system, the button is located at the bottom left. To turn on, you need to move the slider from the leftmost position to the position of the register, marked with an asterisk. Drown it and simultaneously press the piezojagal button several times before the foster flame appears.
At the same time there are loud clicks, they should not be afraid, so it should be. If the outstanding flame caught fire, release the slider button if the nozzle did not occur, repeat the entire procedure again. The unit may not start if after a long idle or when it is first turned on in gas pipes hit the air. To remove it, the slider button should hold down in a recessed state until all the air is removed.
As soon as the unit turned on, set the power you need with the same slider. The extreme right position provides maximum power, and gas consumption increases. Using a round handle, the required fluid flow is installed and its temperature.
Turning the handle clockwise, you reduce the flow and increase the temperature, turning against the clock - on the contrary, the duct increases, the temperature decreases. Installation high temperatures Increases the cost of gas and the formation of scale in the heat exchanger.
The west flame burns constantly, and the main burner is lit at the time of opening the crane with hot water. Disconnection occurs when you close the crane with hot water. To completely disable the unit, you need to move the power regulator slider to the leftmost position, the ignore flame will get out ...
If there is a risk of freezing water in the device, for example, at the cottage in winter, It is necessary to completely drain the water from it. To do this, it is necessary to close the valves for the supply of water and gas, open the taps on the mixer.
Remove the housing casing, unscrewing several bolts, to access the water node. Accept the bracket in the form of the letter "P" from the filter housing on the water reinforcement and remove the cap, which is located immediately behind the bracket. Wait for some time until the fluid is completely solved.
To extend the life of the device, it is necessary to regularly carry out maintenance, at least 1 time per year. Clean from dust and soot the inner part of the column, wash the heat exchanger from scale. It should be aware that all work with gas equipment should only produce a specialist.
After all the work on the preparation of the boiler Bosch Gaz. 6000 to launch, after preparing, which includes verification expansion tank, shut-off reinforcement, filters, pressure testing in the gas highway, tightness of the connection of all joints, the boiler connects to the electrical network.
After washing to the power grid on the electronic display, which is located on the front panel of the unit, the "Attention" icon appears. Next, press the inclusion button on the front panel located next to the top left corner of the electronic display. Above the display is a magnetic instruction that allows you to easily change the settings of the unit.
When turned on, for two seconds, the boiler electronics performs self-diagnosis, all sensors check and is translated into blocking mode. The display displays the current temperature and code of the status. Next, it is necessary to adapt the fan speed to the length of the chimney to which the unit is connected.
This operation is performed using simultaneous pressing and holding three buttons - "+", "-" and "back". The mode is set in accordance with the parameter specified in the instructions for the device - set the second service level, confirm the action by the "OK" button by holding it until the appearance of square brackets on the display.
In addition to the display, at the right bottom, a manometer is mounted, indicating the pressure in the system, the normal pressure is in the green zone. The red zone indicates the pressure below and above the nominal when the protection is triggered and the unit is turned off.
Bosch Therm 4000.
You can increase the pressure using a blue crane by unscrewing it counterclockwise until the pressure gauge arrows returns to the blue zone. With an increase in pressure, fluid is reset through the corrugated tube at the bottom of the unit and the pressure gauge will return to normal.
The boiler can operate in two modes, heating fluid and and heating mode, which of the modes is active, shows the icon on the display.
The selection of the mode occurs by pressing the "+" or "Mode" button. Selecting the mode, install the desired temperature, then press "OK" -Drevious the selection, after which the up-down arrows appear on the display, using the "+" and "-" buttons set the necessary heating temperature. To save the selection, you need to click the "OK" button and retain a couple of seconds.
If you need to install the operation mode, selecting it with the "-" button, confirm by pressing "OK". Selecting the temperature and saving the choice is similarly as when the water heating temperature is set. The fire icon appeared on the display indicates that the turbine has turned on and heating began.
When the set temperature is reached, the fire icon will disappear, after the fall when the boiler turns on again, it will appear again, it will occur cyclically throughout the entire operation of the boiler for specified parameters. In case of any malfunctions in the BOSCH GAZ 6000, for example, in the absence of gas or water supply, protection will work and an error message will appear on the display.
Deciphering errors and action to eliminate it are described in the instructions for the boiler. After detecting and eliminating the cause, you must confirm the action on the display by pressing and holding the "OK" button for a few seconds. After that, the boiler automatically starts up again.
The unit is protected from freezing if the pump and the liquid circulates heating system. If the boiler must be turned off, then antifreeze is added to the heating fluid, and the water is added from hot water supply, as a rule, a specialist produces such work. Maintenance It also produces a specialist, since the unit is a rather complex device associated with high pressure and gas.
We offer to watch a video about the rules setting column Bosch 4000 AG:
Due to the wide range of functions and high quality Gas column Bosch is very popular around the world. With this unit, you can create an autonomous hot water supply in an apartment, a private cottage or a summer house. The market seems to be a big abundance of models of this brand, among which a simple buyer can be confused and buy gas column Bosch, inappropriate under certain conditions. To avoid a similar situation, it is necessary to study the principle of operation of water heaters, characteristics and varieties.
On the official website of the company provided a wide range of Bosch gas columns, so that each consumer will be able to choose an option in terms of cost and technical characteristics. Each classification is characterized by a view of the ignition, power and performance, but they are all fulfilled in two main shades:
Modifications are made at the Portuguese factory, but you can buy Bosch devices in Moscow, St. Petersburg and in any other city through official representatives. There is a separate series of gas speakers, which is going to China, actually, and is the most budget option. Consider in more detail what versions of the devices are supplied to the domestic market.
This line is considered the cheapest itself, since it has a relatively low productivity up to 10 l / min. And involves work in combination with one water intake point.
Water heaters have a ignition system from batteries, heat exchanger tubular typeconsisting of copper material and steel burner. In the units there is a controller degree of thrust and flame level. Also devices equipped with a sensor temperature mode Liquid and gas flow. This version includes Bosch W 10 Kb device with compact dimensional parameters and approximate cost of 8,000 rubles.
The most popular bosch gas speakers series, which is manufactured with an automatic ignition method or piezorozhig. In the first case, the water heaters function from batteries and require regular replacement of the voltage source, the second option needs constantly pressing the key to start the work. 3 varieties are supplied to the market, with different power indicators and levels of performance - 10-15 l / min.
Bosch WR 10-2 P23
The aggregates present a heat exchanger consisting of copper material, due to which the device increases an operational period of up to 15 years. In addition to the entire modification, they are equipped with a smooth modulation of the burner fire, due to which the device is able to independently maintain the specified temperature mode even when pressure hopes.
One of the most important advantages is the possibility of functioning at water pressure in watering system 0.1 atm.
This classification includes the following models:
Each variant has an individual method of igniting the column. In the first case, the ignition is carried out without the user's participation when opening a water intake crane, in the second - you need to set fire to the wick in the device, simply by pressing the desired key.
Water heaters with Piezorozhigg are significantly cheaper than instruments with an electric fuel, but each of the options has its drawbacks - the need to replace the batteries, the inconvenience of the inclusion of the column at a distance of a more elongated hand, etc.
Basic distinctive characteristic Devices of this series, this is the presence in the design of the fan that creates forced thrust. Devices are capable of functioning without chimney system, so special service will not need. Such aggregates are particularly relevant for apartment owners, which do not have the ability to equip chimney.
THERM 4000 S WTD 12 AM E23
The output of combustion products and the supply of fresh air is carried out due to coaxial chimney. This element needs to be installed horizontally through the wall directly to the street. It is implemented in the quality of an additional option and, as a rule, comes separately from the gas column.
Also in aggregates there is a digital display to determine error codes, setting the temperature mode and other programs. This deviceThanks to the modulation device of the fire burner, can maintain a given mode with an error up to 1 ° C.
The line includes the following models:
It becomes clear from this that modifications are made in three versions in terms of capacity and intensity of the warm-up 12-18 l / min. They have drawbacks - devices operate from 220 V mains, therefore, the models are considered completely vulnerable.
Video: Gas column Bosch Therm 4000 O (Overview and Setup)
Bosch 10 2G, WRD 13 2G, 15 2g, 15 2g are equipped with a hydrogenerator and automatic torch, which is performed by water flow. During the opening of the crane, the liquid circulates into the column, and the HYDRO POWER system at an automated level starts the device with a hydrodynamic generator. In this case, batteries or piezoelectric batteries are required.
THERM 6000 O WRD 10 2G
As for the effectiveness of heating, it is equal to 10-15 l / min., Depending on the modification. The control panel is equipped with a liquid crystal screen, which all information about the operation of the device is displayed.
These series are considered industrial, since it is capable of producing 24 and 27 l / min. and work for 4 mixers. Gas speakers have an electrofery and a liquid crystal screen on the front of the panel.
THERM 8000 S WTD 27 AME
In the first case, the aggregates are equipped with two fans, in the second - a special condensation device and an electric drive.
Each consumer should know about the problems with which it may encounter during the operation of the Bosch gas column. In independence, what kind of model W10 Kb or WRD 13 2G, where bought and at what price, the following situations may occur when used:
In order to understand, you need this device in the house or not, recommends familiarizing with the reviews of real people. We, in turn, analyzed them and received such a consolidated table.
Pros of aggregates:
Cons of devices:
Video: How do Bosch's water heaters choose - what's the difference
Consider using the example of models of gas flow water heaters Bosch WR10.B, WR13.B, WR15.B made by Germany, for the markets of Russia, Ukraine, Belarus. These models are distinguished by the amount of heated water.
Bosch WR10.B, WR13.B, WR15.BBefore starting, check whether the gas and aqueous valve is open, whether the two-type batteries are inserted with a capacity of 1.5 V. These models of heaters are equipped with an electronics, as evidenced by the index in the end of the title. Electromotor occurs with the battery.
To turn on the device, click on the power button on the front panel of the device, the column is prepared for operation, is in standby mode. In order to make the heated water, it is necessary to simply open the crane. At this moment the ignition flame lights up and a major flame is lit in four seconds, therefore, the ignition flame shines approximately twenty seconds.
These devices have no constantly burning wick, which is economical, since there is no permanent gas flow. With a long break in work in gas system can accumulate air that will prevent proper work The stobnant and, as a result of this, the main burner is not able to light up.
To eliminate this problem, you need to open and overlapping the hot water crane several times. Adjusting water heating occurs due to the reduction of its stream, with the help of the valve turning clockwise, it decreases, counterclockwise, respectively, on the contrary, the flow increases and the temperature decreases. With a small water temperature, gas costs are reduced and scale is less formed in the heat exchanger.
On the video other than the startup procedure, you can find out about the column setting:
The difference in these models is the amount of heated water per minute. A device equipped with a piezorozhig is denoted by the letter R at the end of the title. It has the ability to adjust two parameters, water and combustion power. To turn on the speaker, you must translate the slider to the position of the ignition, drown it.
Press several times on the Piezorozhig button, until the flame appears on flash burner. Wait ten seconds, release the slider and translate it into the desired power position. When moving the slider is right, power increases, and it decreases to the left. The column is all the time in standby mode, if you need to get hot water, you need simply open the valve with hot water.
When you need to turn off, move the slider to the left until it stops. After a couple of seconds, the ignition flame will get out. Cross the gas valve and water cranes.
In the video below, look at the instruction on the inclusion:
Before starting, you must make sure that on the plate installed on the machine on the machine, the gas marking corresponds to the gas connected to the device. The device has the ability to connect a remote control panel, which fully duplicates the display of the display on the column.
Open the valve of the gas crane and water valves. Connect the device to the power grid.
The installed water temperature by the manufacturer is 42 degrees, this is the optimal temperature.
To turn on the device, you need to simply click the Enable button and open a hot water crane. To regulate the temperature, you must press the "+" or "-" button and select the temperature you need. While the temperature you choose is not achieved, the testimony on the monitor will flash.
If it does not reach this value for thirty seconds, the monitor is displayed the water tap icon, which shows the need to increase or reduce water consumption. If you press the P button, a programmed constant temperature will appear equal to 42 degrees. The minimum temperature setting reduces energy consumption, and makes it possible to reduce the formation of a lime-plating in the heat exchanger.
But if you know how to turn on the column, but faced with faults (flops flies, does not ignite), where the causes and methods of their elimination are described.
On the market household appliancesprobably already difficult to imagine trademark Known than "Bosch". The company quite successfully delivers products around the world under its brand all over the world, ranging from irons, refrigerators and ending with the power tools. An individual division is the production of a German concern heating equipment: Boilers and water heaters from "Bosch thermal engineering".
Solid fuel and for many years he is heated at home, both in Russia and abroad.
Russian consumers use specially popular gas columns Bosch.The reviews for which can very often be seen on specialized sites. Buyers attracts quality and reliability when affordable price On flow water heaters from the German manufacturer.
Let's get together, whether the Bosch gas column is worth buying today, considering such a wide selection of manufacturers in our time. To do this, you need to consider the lineup, prices I. specifications The apparatus from the German concern, shortcomings and advantages compared to its direct competitors in the market.
We will make a small overview of Bosch gas columns on the basis of the instruction manual, as well as reviews of specialists and buyers. We will analyze the basic malfunctions of the Bosch column: why the stall is not lit or goes out the wick, etc.
Model range and features of Bosch gas columns
Bosch gas columns, unlike their direct competitor, have a very wide range of model range. Many modifications S. different types ignition and performance, design and size. Water heaters are found in two colors: white and gray.
Bosch Gas Speakers: Model Row
1. Series THERM 2000 O.
This is a budget gas column with a small capacity of hot water 10 l / min. This unit is equipped with an automatic spray from the batteries, a tubular copper heat exchanger and gas burner From stainless steel.
As in the columns, there is an emergency traction sensor and flame control, as well as the water temperature sensor and the gas control system. The Bosch W10 KB column has a compact size, and it is possible to buy it inexpensively, from 8000 rubles.
2. Series THERM 4000 O.
The most popular models are available, both with automatic spare parts from the batteries and with a piezorozhig. When you click on a special button. Three types of different power and capacity from 10 to 15 l / min are supplied. Bosch gas speakers in this series have high quality copper heat exchanger To heat the running water with an extended service life of up to 15 years.
Also, these models are equipped with a smooth modulation of the burner flame, with which the device itself supports the displayed water temperature on the outlet. An important advantage of this model is that this column is included with the water pressure of only 0.1 atmosphere.
The flow gas water heaters of this series have the following designation:
- Bosch column with automatic ignition (there is an article "B"): WR 10-2b, WR 13-2b and WR 15-2b;
- Bosch column semi-automatic with Piezorozhig (marked with the "P" symbol: WR 10-2P, WR 13-2P, WR 15-2P.
Bosch Column with Piezorozhig
The main feature of this model is the presence of a fan for forced thrust. These columns can work without chimney, i.e. It does not require its special structure. This feature It is very convenient when the apartment or house is not able to set the chimney.
The emission of combustion products and air flow into the gas column is carried out thanks to the special, which is installed horizontally through the wall to the street. This kit is an option and comes separately from the device itself.
One more an important feature AM1E Bosch Series Gas Columns is the presence of a digital control panel on which possible mistakes When malfunctions of the device. You can also set the water temperature and, thanks to an even more smooth and accurate modulation of the burner flame than that of the previous model, this water heater will maintain a temperature with an error of only 1 ° C.
The model is produced with three types of power, with a capacity from 12 to 18 l / min. Unlike other models, this series of devices is energy-dependent due to the built-in fan, nutritional from the network 220 V. are marked as WTD 12 AM E23, WTD 15 AM E23 and WTD 18 AM E23, depending on their nominal power.
Gas column Bosch "Automatic" with closed chamber Combustion
The gas column of the Bosch six hundred series is equipped with a built-in hydrogenerator. Automatic ignition in this model is carried out due to the flow of water through the column. When the crane is opened, water enters the water heater, and the Hydro Power technology automatically comprises a gas column through a special hydrodynamic generator.
For the ignition of the device, neither a piezoelectric element or batteries (batteries) are not required. Available in different performance: 10, 13 and 15 liters per minute. Have an abbreviation WRD 10-2G, WRD 13-2G, WRD 15-2G, the numbers show performance.
There is a small LCD display on the control panel, on which only the temperature of the water is displayed. This parameter is set using a mechanical regulator on facial side Columns and supported by the device automatically.
5. Series Therm 6000 S. and 8000 S.
These are industrial models of gas speakers from the German concern. The performance of the water heaters of these series is 24 and 27 l / min, respectively. These columns are capable of supplying hot water 4-5 waterproof points at the same time. Bosch water heaters are equipped with an electric vehicle and an informative LCD display on the front side.
The model of the 6000 S series has two built-in fans to remove combustion products and air seats. Bosch 8000 S Water Heater Thanks special technology Condensation has increased water heating efficiency. In addition, the water valve of this model is equipped with an electric drive.
Bosch Gas Column
Consider Read more internal organization flowing water heater Using the example of the Bosch gas column of the popular series "Therm 4000 O" model WR with a piezorozhig.
The inner device of the gas column brand Bosch
The principle of operation of the Gas Column Bosch with Piezorozhig is quite simple. Install the water temperature control to the "On" position, press the button of this controller by pressing the Piezorozground button simultaneously. Hold the thermostat button to turn on the column. They specify the desired water temperature.
The principle of ignition gas column with automatic rally is even easier. We open a hot water faucet on the mixer, and the column turns on the itself, thanks to the previously installed in the device, batteries. W. gas water heaters Bosch they come complete with column. The surmise in the devices with the Piezorozhigi burns constantly, and the columns automatically fumbles when the device is turned off.
Specifications of the Gas Speakers Bosch Series WR
Water heaters from the German manufacturer can work, both on natural and on liquefied gas. The diameter of the gas supply nozzle is 3/4 inches, water - 1/2. The diameter of the chimney nozzle is different, and depending on the specific model ranges from 115 mm to 135 mm. Other parameters can be seen on this table.
Bosch gas columns: specifications
1. goes out the flame of the fist or the column does not ignite the first time.
It is necessary to clean the power burner.
2. The scatter fades or gasnet Fitil When opening the crane on the mixer.
Check the pressure if the column operates on a liquefied (balloon) gas.
3. The water at the outlet is not hot or cool.
Check if the position is set to the column temperature regulator.
4. Periodically goes out the stall.
It is possible that the thrust sensor or water temperature is triggered. You need to call a specialist to eliminate these problems.
5. Bad water pressure through the column.
There was a clogging of either the heat exchanger of the column or water node, or the mixer. Resect this source of clogging and clean it.
6. The automatic column does not turn on (not ignited).
Check the status of the battery. Replace them with new ones.
Advantages of Bosch columns
- high-quality assembly;
- high-quality materials;
- Wide lineup;
- modern technologies;
- Silentness when working.
Bosch gas columns
- an insufficient amount service centers;
- price of column;
- Prices for spare parts.
Today we looked at the legendary manufacturer of household appliances, in particular, gas columns from the German concern. Details disassembled all models, series and specifications gas columns Bosch.. Feedback can be found different, but the columns from this manufacturer undoubtedly occupy one of the first places in the ratings in quality and reliability. We watch the video.
In fact, the only drawback of the devices of this brand is their price: the model of Portuguese assembly will cost an average of 12-15 thousand rubles. And to decide - buy a gas column Bosch today or not, of course, only you.
