Masters and beginners use crafts from plastic bottles For the interior, like a garden decor and in the form of practical furniture. Colored covers from plastic bottles - excellent material for mosaic panels on walls and hedges. Best ideas from detailed instructions And the photo is easy to implement at the cottage, turning a naked plot in the "Polyana of Fairy Tales", and the house is filled with useful trifles.
One of the most crazy handles Runet Roman Ursa presented a plastic video, which showed 70 ways to use plastic bottles.
Successfully made souvenir or bauble over time will turn into a hobby, if there is no fantasy limits. Do not cease to admire summer houses that have passed from simple hedges on the wire to buildings admiring the scope.
From an affordable material that many emit, someone builds:
Plastic over time becomes a real environmental disaster - it is difficult to dispose of it. But it should be attracted to cleaning the territory of all those who are not indifferent, and there will be a whole mountain of empty PET bottles for building greenhouses, cascade flower beds or vertical landscaping. The only drawback is a long harvest of the same container, since the capacity is released different color and volume.
To create an original decoration required:
In the hands of this Master, plastic bottles acquire the second life, becoming functional objects. Souvenirs are better to do for a seasonal principle. For example, New Year's toys Mastery in winter, practical country buildings - in the summer, and in the spring and autumn it remains to build a "glade of fairy tales" at the house for children.
Furniture from plastic bottles looks like a masterpiece, not available to everyone. For them, there will be a lot of plastic containers of the same sample. Sofas and puffs are impressive with their design and convenience, not yielding real furniture. There is nothing complicated if the sofa is made on blocks - seat, back, sidewalls. If the containers are not enough, the blocks of the sofa can be made alternately. It is better when collecting bottles from a single beverage, such as a two-liter kvass or lemonade.
The principle of "assembly" of furniture from bottles is simple - they are exhibited by layers and firmly wrapped with scotch. In order for the furniture to be softer and spring, it produces some air from each bottle and tightly twist. To the place where the cover, the cap is cut out of another bottle and primed with scotch. It turns out a block that, on both sides, the Donette is the basis of furniture.
Further all depends on the fantasy, such as furniture and the number of bottles available. Scotching 7 tanks of the same volume, the base is obtained for the POPI. What will be his appearance and stylistics, depends on the master. For soft seating, you will need a round pillow or a block of foam rubber in the size of the vertex. The case is exhibited by the size of the PUPPIC in the form of a cylinder, and on the side seams it is convenient to insert zipper, but it is easier to sew the upholstery.
To build a coffee table, you will need 4 racks from plastic bottles and plywood shield as table tops that can be hidden a long tablecloth. Similarly do comfortable stand Under the laptop or remote table for the cottage. For large furniture (sofa, chaise lounge or armchair) from plastic bottles, you will need a lot of patience and source material.
Decorate a schoolboy's bedroom or a children's room with crafts from plastic containers will not be difficult. You can build a whole bouquet of artificial colors. The resulting chrysanthemums, chamomile or roses put in a vase from the same material, supplementing the middle of the diode light bulbs on the insulated wire. Thus will look like a night light of an extraordinary beauty, where weak light shifts in plastic petals.
Council: To give a special form leaflets, use the heating of the blanks and turning the corners of the forceps!
To accommodate a homemade bouquet, a suitable vessel will need, just cut off the part of the bottle - not aesthetically. The edges of the cut are placed according to the ruler to make cutting, securing the result by heating bends. A small transparent bottle is cut under the top, a large container is cut around half. We choose the material with the rifer or the "waist" in the middle so that there is an interesting basis.
Then we do the way that fantasy allows, but the edges are beautifully bend. Bach cut is obtained from vertical or diagonal plastic base. The formed bands are evenly bend on the outer side.
Note! It is important that all the notes and the depth of the slot be absolutely the same, then all the product will come out neat.
Depending on which region is desirable, the strips of a vase (the edges of any other product) are fixed in different ways:
Color plastic container in the form of bottles and butches of different volumes is suitable as capacities for growing living plants. It is very easy to make a fragrant balcony of 3 liter tanks - Cascade of ampelnaya petunias. Fragrant flowers hanging from cut tanks will help bring the dream of a beautiful paradise.
Cut in half large bottles and tanks hang and donate down and lid. It is recommended to put a large pebble for drainage. Excess water after irrigation leaves to plants in the lower rows. In the same containers, plants are grown without soil - a hydroponic way with the addition of fertilizers. Fresh greens and seedlings (in urban and country conditions) also germinate in prepared plastic bottles.
Council: Use the compact form and the ability to hang the tank for vertical landscaping with automatic irrigation. In the absence of the owners of watering can with water, immersed in the ground, will cope with moisturizing plants.
With the help of plastic bottles, you can scare pests or attract birds to the site. To do this, the tank is used as a feeder, and the roots fruit trees Place traps from bottles with chemicals. From the double plastic capacitance, the craftsmen build traps for the OS, where they flush on sweet water and cannot get back.
At the cottage, "an ambulance" is easy to build crafts from plastic bottles in the form of an improvised washbasin, hanging a full bottle upside down. It is worth a slightly lid, and a small flow of water will help to wash and wash your hands. It is also worth making a shop and organize lighting with beautiful owls or dwarves of their plastic. Any garden decor for inspiration - on interesting illustrations.
Make the original cosmetics from 2 dyshk plastic bottles, stitching the edges of the zipper. This box can be used as a multifunctional item - piggy bank, a case for large beads, hairpins or jewelry.
From a similar ball suspended somewhere nearby, it is convenient to knit, pulling up a thread from the ball invested inside. Nail polish or lipstick collection is easier to find in an improvised lightning box.
The summer season passes, and self-made flowers from plastic comes to replace the living flowers, not inferior on the beauty of the beauty. Their advantage is the ability to decorate the territory at any time. These flower beds are blurred against the background of living plants, but in early spring And in the late autumn only they attract enthusiastic views.
For daisies, you will need small plastic white tanks (petals), yellow (middle) and green (leaf). It will also need to be selected and the candle (for heating), "liquid nails", scissors and rigid wire in green isolation.
The basis of a white bottle is cutting up to the center, setting 16 segments - these are petals. Neat edges bend over the flame of the candle, we also perform 2-3 camcakes of chamomile, which we connect in the center of Sil. The stem with the leaves on the green wire is fixed here, closing the middle. Flower center fill in a yellow basket with small cuts from 2 finely dissected circles with a bent over a candle with a fringe. We supplement the flower with green cups from the bottom, wech the parts and fix together.
From the remaining pieces of green plastic, we cut leaves with a hole at the base (for the rolling) and give the desired shape, warming the candle over the flame. On the cutting of the wire, the leafs are fed, they must slightly go through it. It remains for daisies to make several "companions" and find a bouquet of a worthy place.
All seasonal flowerbams include mosaic compositions from tanks filled with land. From the covers make wall panels. "Butterfly" or " ladybug"- in different versions.
The incredible beauty of the bird with a plastic lap is a whole "glade of fairy tales". It is a peacock or a fireband, swans, pigeons, bullfinches and parrots. All of them are made of empty PET bottles according to a common principle:
Plastic swans can be fenced off by the blue "lake" of inverted plastic bottles. Skyline birds will decorate the trees in the garden corner, which is assigned to children's games. You can choose the thematic decor, for example, uninhabited island with palm trees and parrots.
The material is collected for a whole year, but it is easier to connect to the idea of \u200b\u200bthe "ecological" cleaning of neighbors and acquaintances. In the courtyards there are special containers for plastic - to dial much easier.
Preparation for work - removal with plastic bottles of labels and glue residues, it is important to rinse well and threw a deformed material.
If vertical hedges are built, they must be filled. Depending on the idea, sand, stone crumb or dry ground, burying down on 1/3, poured into the PET bottles.
For selected purposes, plastic of different elasticity are used. Thermal processing is required for filigree work (flowers). It is important not to overheat sliced \u200b\u200bfragments.
For fabulous characters, an additional painting is sometimes required. For example, pink piglets for the playground is better to cover with an aerosol from the canopy, consolidating the transparent acrylic paint.
Plastic bottles - excellent material in skillful hands. Using them as a basis, it is easy to teach children a lesson to environmental education and fill the house or plot with practical things. With a creative approach, the color, volume and form of plastic bottles themselves will tell new ideas for an exciting creative process.
Tags:Plastic bottles considered to be familiar to household garbage can turn into homemade toys and original decorations For home and yard. The manufacture of plastic containers decor has become a fashionable direction in. And created by diligent handlescrafts from plastic bottles for kindergarten tell fancy forms and bright colors.
To date, all sorts of forms, colors and sizes are produced. This property can be favorable, creating colorful figures from plastic bottles for.
Bright and funny, they allow you to solve several tasks at once: please the eyes, develop creative abilities, teach children a caring attitude towards nature.
Features of working with PET bottles:
Colorful flowers, birds and animals will decorate the kindergarten, if adults on a par with children will appear fantasy and smelting. Help make unusualcrafts from plastic bottles for kindergarten video lessons for different age groups. The best master classes are expelled on our website. After reviewing them, you will comprehend the magic of creating man-made beauty.
Putting the purpose of registration of a sector of a kindergarten of plastic bottles You can invent bulk compositions, paintings, panels and other decor items. Bright bouquetwho does not get enough, can create the smallest pupils.
How to create your own hands a simple bouquet of plastic bottles:
Colorful airplaneMade in the technique of Papier-Masha, will become an indispensable attribute of boyish battles.
Like children homemade shark. You can play with it alone or arrange a contest between friends if you make a few identical marine predators. Shark is very pretty and not all terrible, and she managed to catch fish every time. The toy raises the mood, develops hands dexterity, you can be happy to feel like an avid fisherman.
Original crafts from plastic bottles in kindergarten It turns out of white packaging from under dairy products.
For girls, you can make another version - beewhich drinks nectar from a flower. The bottle of beer with an oblong neck is best suited. Cut the bottle in the form of a flower, weave the petals and flex. The bee is drawn on a box from under the Kinder Surprise, we connect with the billet of the flower with a twine.
The usual decor of the garden of the garden is wooden figurines of animals around playgrounds and gypsum figures in a flower bed. Originalcrafts for the playground from plastic bottles Allows to decorate the territory no less bright.
Create luxurious flower garden, in coloring the bottom of the bottles of one size in several colors. Optionshow to decorate the playground from plastic bottles in the form of a flower composition, there is a great set.
The original flower garden can be placed on the old tree, giving him the second youth and a bright appearance.
Colorful chamomiles From yellow and green bottles will help to make the territory where children walk with a brighter and cheerful.
Decoration of the lawn around the pond will be princess Frog And her girlfriend. Nicefigures of plastic bottles for kindergarten Can be covered on a big stone or among the bright green garden greenery.
As you can see, crafts from plastic bottles for a sector of kindergarten May be the most different: from the jewelry of the courtyards and playgrounds to interesting toys.
Cashing like a similar type of creativity, educators and pupils learn to give will imagination, develop the ability to express ideas into concrete incarnations, find unusual in everyday things. What to do depends on the number of collected packaging and fantasy performers. Create and make the world around yourself brighter, cleaner and noble.
Plastic bottles are not just a water packaging, but also an excellent material for creativity and. Some craftsmen are committed to making it out of them, which is difficult to imagine. Everything you need in this business is actually material, scissors, sometimes paint, glue and free time. Also, it would not hurt to include creativity and stop looking at the container from under the favorite soda as an ordinary thing. So let's get up!
It is easy to make this crawler, so it is from it that we begin. In this one can land flowers for the summer or use piglets in quality. This will revive anyone, children will be happy to be happy.
Tools and materials:
The container needs to be rinsed and dried, and if there are labels on it, they should be removed, as they will interfere. If you decide to do kashpo, then the upper part should be cut down so that there are far flowers to plant and pour the land. If you create garden sculpture, I miss this step.
Smaller bottles will be used to create legs. They need to trim from the neck by 10-15 cm or on that length that is needed.
Tip! The more the hoofs make, the higher the piglet will be. Moreover, the containers should be selected the same volume so that the limbs come out even and beautiful.
Tip! In order to be more convenient to glue legs, it is necessary to cut every neck in the widest place with a fringe and edges of it.
Now the responsible task is gluing. To do this, you can use:
Tip! It is more convenient to glue two limbs, since after applying the adhesive composition, they need to hold them for a while for high-quality bond. Use the glue is needed according to the instructions.
After everything gets dry, you can cut ears, they will be from the same material as the entire piglet. It is convenient to cut them out of the lower parts, as there is a factory convexity. The form is natural, the size is arbitrary. For the convenience of gluing below, you can also make a fringe - like on legs.
On a note! It is most convenient to glue if you do Cashpo. Cuts in this case must be glued to the container from the inside the same composition.
Now the creative stage is painting. Natural Color - pinkBut optionally you can use another. Experienced masters advise to use, she goes well on plastic and more durable. It is necessary to college only outside, but carefully so that the color of the bottle does not transform. It is very convenient to keep the lid-patch. Do not forget to cut and glue the tail, it is also of plastic, it is more convenient to paint it before sticking. Pikes can be drawn or buy, such are sold in any sewing store.
Important! If the piglery will be used as flower pot, It is necessary to make holes for free outflow of water in the lower and side parts.
Detailed Master Class for Making Amanic Bottles - On Video:
That just do not make skillful hands from unnecessary (rush) items. Crafts from bottles do it with their own hands are made to arrange summer cottages, playgrounds. And they look very attractive and original. Plastic is the cheapest and affordable and very flexible material. From it you can create figures of animals, colors, dolls, children's transport, borders. Some craftsmen use them in the construction of arbors, fences, greenhouses, garden furniture and even boats.
Many throw out containers from plastic, considering it garbage, but it is a unique material for crafts that will certainly find application in the economy. Features of it, as a material, for creativity are that:
Create characters and all sorts of figures for children - a special direction of amateur creativity. It is advisable to do them together with them. So they are easier to teach to the perfection, teach care, concentration, develop fantasy. Consider on the example of master classes, how to create simple figures and fabulous characters for children.
There are several options for the manufacture of this gentle flower.
White bottles will be required for work. They usually sell milk them and should take a bit. In extreme cases, you can use transparent, but then repaint in white. We will need 3 bottles for each chamomile. All of them must be the same neckline diameter, otherwise it is not possible to collect together the lush pieces.
Cut the upper part (neck with a lid), just below the expansion site. We do it only with two bottles, we leave one. It is desirable that the lid has a yellow color.
On each throat, cut out about 8 petals. Only so that they keep, and not disintegrate. Arrows alternately in the opposite direction.
Let's start collecting the flower: we put one of the blanks on top of the one that remains not cut.
Then the second exactly as well.
We deploy and flexing the petals so that the chamomile looked natural and lush.
Fix all three layers with a lid, try to do it upstream.
Such flowers can be left as it is, and you can paint into different shades after the assembly. They can be put on the stem from the wire or attach to the fence.
This chamomile is a more complex design, but also looks more natural and more beautiful.
From the cylinder of the bottle, cut circles (approximately 8 cm in diameter, it is possible and more if you want to create a large camomile). Three mug happened to each
Each circle is subsequently cut on 16 strips and form flower petals from them.
In the center of sewing, fired on fire, make a hole.
A little later, when we collect the workpiece, you need to hold it a little over fire. So the petals wrap yourself by creating right shape Chamomile.
From the yellow cover, cut out the core of the flower, pierce and fasten the wire with the inflorescence.
Czeshelistic is made from a green bottle, we also melt a little over the flame.
On the stem first fasten a cup of petals, then three billets of petals, core and clamping pliers so that the chamomile does not break. Wire after bending is carried out again through a cup and twist with the stem.
The stem will serve the wire to be wound on thin strips (approximately 5mm) from green plastic. To lay the layers well, they also need to be cut.
If there is a desire to create a whole composition, make leaves, cutting them out of green plastic, fall out a little, wrap on the stem.
You can bouquet and diversify a bouquet, combining them with cornflowers. There is a blue plastic, the petals are cut on the form of cornflowers. Collecting the flower is similar to the chamomile.
On this technique, you can make any kind of wildflower, and even roses if you can change them correctly.
Now let's try to make a gigantic chamomile.
As you can see to create such wonderful decorative flowers, you will need only a few hours of time, bottles, sewn, candle, glue and scissors.
Plastic bottles from under Kolya will be suitable for the creation of a penguin, due to its alternate form in the middle and expansion from it, it turns out the plausible Taurus of the Penguin.
Tools and materials:
Step-by-step Penguin assembly:
Let's try to make another toy for kindergarten - a crocodile.
Prepare for work:
Manufacturing and assembly instructions:
Bottles first at the beginning in half, then so that the distance is about 7 cm to the neck.
It is necessary to form the edges so that when assembling the body of the crocodile was a bit bent. As shown in the photo.
Covers stick on the floor of the legs.
From the cardboard to form dense balls - eyes, attach to the body.
All the alligator housing will enclose green colored paper.
From the paraffinated paper cut out eyes, teeth, legs.
Tassel Paint your teeth (white), nostrils (black), eyes (also black) or use dark buttons as an eye.
These fun insects do very easily.
Prepare in advance:
Instructions for execution:
From plastic cup cut the wings with a bee, as shown in the photo.
The bottle is completely not needed. We make only small cuts on the sides, a stationery knife. These will be the placement of wings.
Insert the wings to your places, stick them.
Next, proceed to painting the bee. There are two ways to paint: paint the body with black, then make yellow stripes, or vice versa, make it yellow completely, then draw black stripes. We use the first to paint it into the dark.
White color on the lid handle eyes, and mouth - red.
You can make it in one instance, you can create a whole hive
To create a hive, prepare:
Plastic bottles are painted in yellow. You can proceed somewhat differently - pour yellow paint inside, twist the bottle so that the paint is evenly layered on the entire inner surface.
This method is a bit harder and longer, but staining will turn out more effectively and with a gloss. In addition, it will not be worse, break and deteriorate.
It should be done in several stages to evenly paint the entire surface. Type the paint in the bottle, shake and put the side. As soon as the first layer of paint begins to capture, twist it to paint the next site and so to the end.
When the idle bees take the yellow color, the black tape is made of transverse strips.
On the cover of glue eyes, the nose of the pre-prepared beads and buttons.
From another plastic packaging, cut out the shapes, similar to the wings. To them, at the same stage of work, attach threads. For them, we then suspend the bee to the tree.
The bee body, we glue the thread with wings with the same adhesive gun.
Color it also in yellow. You can, again, take advantage of the complex method of painting. Or, so that time is not to lose a lot just paint the brush from above.
The roof of the hive will do from the urinary brushes. We take them in a bunch, tie the twine.
On the cover of the bottle - this is our area of \u200b\u200bthe roof, applied the thick layer of glue. We lay out the urinary brushes on it so that they are evenly distributed from all sides. If somewhere they dug out a little, glit.
We leave the craft for a while at rest for drying.
All are ready and bees, and hive. It remains only to attribute to kindergarten and hang on a tree.
In the same way, you can make a lot of bees, but without a hive and hang each other to the tree. By creating a real children's center of beekeeping.
Creation of crafts-bees - an interesting occupation, work is not complicated. If her child himself does, under your sensitive leadership, it can be a good souvenir grandparents. Very spectacularly, such an exercise will look on the background of abundant tree foliage.
Easy to perform and very interesting model of crafts.
Prepare materials:
We start to make an insect:
First we prepare the bottles to work: wash, preferably with soap, free it from the label, the supreme.
On the pure sheet of paper, you scan or translate through a copy of the butterfly figure. To do this, we need stencils. You will find it at the end of this subsection.
The gel handle needs to circle an insect contour to the surface of plastic and cut.
We have a figure with curved down wings.
Transfer her, we need them to look at the top.
We take a gel handle again and draw all the lines as shown on the stencil.
Silver-colored nail polish paint the middle (torso) and mustache. Draw and contours of the wings in the same tone.
Now the lacquer needs to draw all the rules, including the smallest, which before it was painted with a gel handle.
Before the edges, we put small points (splashes).
Against the background of the silver drawing of the wings, also put the points, only brown.
Butterfly taurus decorate rhinestones. For this, any nail polish, we put the droplets and from above the garden pebbles.
The butterfly is ready, for everything about everything, we needed a little time and material that, for sure, there will be houses in the farm and mom.
Similar to the previous butterfly, we make one more, only for this time in monophonic and without pebbles.
We have two plastic butterflies painted by one tone.
If you glue the magnet - they will serve a good decoration on the refrigerator or any other metal surface.
Let's look at another version of execution. It we will be painted not lacquer for nails, but paints for stained glass. In the first version, we drew a butterfly on plastic, cut it out, only then started painting. There is another technology here. We will draw insect on the bottle, we will paint it on it.
Prepare everything that is useful in the work:
Step-by-step instructions for execution:
On paper we carry a butterfly from the stencil.
Redraw the insect on plastic. You can do this. We cut the bottle, from the inside, find the picture so that we can be clearly visible from above. Gel handle transfer contours to plastics.
When we finish draw, you can start coloring. Recall, paint, without cutting the insect, the paint falls on the bottle, along the contours. After painting, we leave a billet for drying. After she will dry well, cut it out. Put the necessary forms with your fingers.
We form a caller. To do this, take the wire or fishing line, which was prepared, we ride several beads on it. You can take the same color, but you can make it multicolored, it is like a soul wishes.
Butterfly, or not alone, if you made them several, ready. They can be decorated with indoor vases, pound on the curtains, attaching from the bottom of the pin, it is better to glue.
If the insect is made by a children's hand - then it will be a pleasant surprise and a gift for March 8 for mom, teacher or grandmother.
The cast material has a lot of opportunities and ways to extend their lives. Moreover, in every family at least something, let it be. Here something special is not necessary to buy or invent, and even more so we spend money on them. Let's try to make the hedgehog from the same cast material, which is the used plastic container.
For work we will use:
Hedgehog technique:
Initially, we give in the proper type of container: mine, clean from the label, wipe and dried.
On the prepared packaging, we glue a cone on glue or foam straight on top (you can also use a glue-gun, if there is such an object in the farm). We start from the center, it will be a spin of hedgehog. We stick each bump as a separate element, after having previously convinced that the previous firmly holds.
If at least one of them falls, and the neighboring will be kept tight, then it will be difficult to "plant". Consider this and do not rush.
When all the bumps are the needles of our hedgehog, will be planted in their places, proceed to the formation of a face. To do this, the bottle cover is plasticine in black.
For the eye, we will be needed, prepared by us, white covers. On them, to the center, we glue the circles from the same black plasticine - it will be the pupils of the hedgehog.
Eye glue to the face of the animal.
Now a little embellish our craft. What a real hedgehog without stocks. Mushrooms, leaves, fruits with berries Let's make out of plasticine. Then we gently lay out to his back.
You can create a baby for the company an adult hedgehog, blinding its plasticine. And since its dimensions are not allowed to experiment with pine cones, then needles on the caller can be made of sunflower seeds.
An interesting handicraft, which can be done with the son for kindergarten. So you teach it to use different roll Material As a material for creating toys and other necessary things.
Prepare for work:
Step-by-step performance:
First, make a hole in the lid so that the tube freely entered there.
Cut the bottle so that the top (with thickening) part remains the whole.
Take the remaining 2 tubes, cut them on the length of the proposed propeller blades.
Cross them and scalulate in the middle pin. Insert the tail of the helicopter into the bottle tube. Make from the two remaining parts of the tubes, connect the strip cut out from the unnecessary part of the bottle by the stapler.
Attach the bulk of the helicopter with the polls is also a stapler. Insert the ping-pong ball into the hole.
The helicopter is ready. The time for it is spent at least, and the pleasure of the toy created by their own hands will have a mass.
Matryoshka - probably the only toy with which not one generation has grown. In addition, it is considered to be a symbol of Russia. Many foreign tourists, coming in our state as souvenirs they buy them. Is it possible to create such a complicated figure with your own hands, and also from the cast plastic? Yes, it is possible, let it be not so functional as modern in toy stores, but it will be personal and, for sure, the most beloved.
In the creation of such crafts, not only the food container from plastics will suit, we will look at a little later. Toys that you see in the photo below are made only from the upper parts of the flashes. So they will be more stable. So that the edges were not excessively sharp, they can be treated with a tape.
On this photo, the upper part is inserted into the bottom, the average is completely removed. This matryoshka has a more respectable look, looks more natural and plausible. Painted with acrylic paints. Children will not be able to do in the same performance, but on the Internet there are many stickers and patterns of such an image. In extreme cases, they have a lot of options to learn and draw on such a layout of nesting.
The following photos and the model itself can be attributed to multifunctional. Here and the matryoshka in their own performance and pencil storage pencils and pens. As we can see, it is not made of food bottle, and their containers from under shampoo or cream.
Approximate drawings and schemes for creating a plastic container mats in kindergartens and at home.
Bottle cut diagram
From a conventional plastic bottle, you can form products that will be useful in the game with children, household, home interior. From the simple material you can prepare a craft in kindergarten. Children can independently cope with elementary making schemes with almost no adults. In addition to plastic bottles, a glue gun, paint and scissors may need.
To make any craft from a plastic bottle, you need to prepare required tools And materials:
Depending on the complexity and decorative finishes, additional materials are selected.
Crafts of a plastic bottle for arrangement of the house is optimal option For the price and quality. From raw materials you can make diverse furniture, in particular, the otfik.
Support such tools and materials:
Crafts from plastic bottles with their own hands: step-by-step manufacture Round Purific Punching algorithm:
Crafts of plastic bottles with their own hands: step-by-step production of square PUPP Furniture of this type can be done in a few hours, it looks presentable, the cost is minimal.
There are many options for creating colors from plastic bottles.
The easiest way to create a surround flower:
In the center of the bottom with a preheated nail, sewn or soldering iron make a hole. Through it, it turns a dense wire, which will become a plastic flower stem.
Crafts from a plastic bottle can be a strong, interesting and budget toy for a child of almost any age.
Several toy options:
| Apple Casket | Octopus | Piggy bank |
| Cut bottoms in two identical bottles. The height of each element should be the same and make up more than 6 cm. In the center of one of the details make a hole with a rolled nail. From the canvas of a green bottle cut striped, twist into the tube - it turns out a stalk. From the same strip cutting a leaf.
Glue a leaf to the cutken, turn the tube into the bottom hole. Everything is fixed with a glue gun. If you insert one bottom to another, you will get a full-fledged apple in which you can store trivia. | Cut the bottle in half. From the cut, measure the distance of 5-8 cm. Divide the circle to the parts, the thickness of each should be 1-2 cm. When cutting plastic for marks, strips are obtained. Twink elements with scissors blade.
From the covers to make eyes. The marker draw pupils, and then attach the blanks with the help of a glue gun to the octopus body. In the bottom to make a hole, turn thread through it. It turns out a toy-analogue "E - E". | Pick up a bottle with a wide donkey. On the lid with the help of a marker to draw nostrils, on the very bottle of the eye. The body is based on a narrow rectangular hole.
From the covers to make stable legs, attaching elements with a glue gun. From dense cardboard, cut ears and glue. |
From bottles you can make any toy by creating a layout of the product:
From plastic bottles you can create a lodge that will be a refuge for kids in the yard, the basis of the sandbox.
Need to make blanks:
Algorithm "Construction":
By the same principle, the roof is made. The overlap can be made and flat using the wall making algorithm. Thanks to the change of the direction of "strings", to which the containers are riveted, can make windows.
Crafts from a plastic bottle can be a completely functional doll that can be played.
List of tools and materials:
Manufacturing technique:
You can make a more complex model of the doll using other auxiliary materials.
From the plastic container it is easy to make a parrot or owl, since the silhouette and the principle of manufacture is identical.
Preparation:
Production Algorithm:
Ovals are stacked by a specific pattern. In the manufacture of owls, the circles of the eyes are first form, then the rest of the head is filled. The parrot feathers allocate evenly - from the top to the bottom. Eyes are obtained from the lids.
Neat, compact and at the same time spacious is a bunk flower bed from plastic bottles.
Manufacturing technique:
Flowerba is ready to plant. Additionally, it is possible to strengthen the design with natural stone, brick, tiles.
For the manufacture of the nesting room, it is better to take a 5-liter plastic bottle. Additionally, you need to prepare scissors and a glue gun.
Production Features:
It turns out a full-fledged house, "entrance" in which is carried out through a wide neck.
Crafts from a plastic bottle can be a bird feeder.
Simple manufacturer:
The grain falls asleep in the bottom, through the poultry windows will be able to get inside the feeders.
For creating plastic palm tree You need to collect more than 100 brown and 100 green bottles, prepare a building stapler.
Manufacturing technique:
At the end, the crown and palm trunk is assembled. You need to connect the parts hard - it is desirable to use a wire. To stood the trunk, you need to turn the workpiece with a metal pin.
From plastic bottles to make a toy or crawler, a child of preschool age, which is relevant for all sorts of competitions in kindergarten.
It is worth choosing simple options And the work schemes so that the child has everything at once, the assistance from adults has minimized.
Choose a container from yogurt or milk. It is desirable that the lid had an orange color, and the container itself is white. Cut the bottle in half. Split the base of the top of the bottle by 8-10 identical parts.
Cut on strips to the neck itself. The edges rounded and close the scissors with a slight blade. Make a bend of every petal to the bottom. Screw the lid.
In the center of the twist, make a hole, by burning the base with a hot nail. Protect the wire - get stem. From green plastic cut leaves and glue with a metal base with glue.
Take 2 identical curly bottles. One cut in half - leave a part with the bottom. From the second cut off the greater half, leaving only the bottom. Connect the blanks by fastening them with glue.
To paint the shape of black paint, donyshko any other. White paint draw the base for the facial part. Shape face. To color the bottom of gluing pompon from threads. At the place of transition, tie a ribbon that will play the role of scarf.
Create 2 green containers. From the first cut only the bottom and the hard part of the neck. The edges of a smaller slice glue. From the second tank to cut off the tight part of the niza and the top. In place of narrowing, cut off along half the bottle.
Cut 20 triangles from white paper. From colored paper to make your eyes, fix on the basis. Printed elements along the cut. Connect bottles with each other. At the bottom of the shape glue 4 covers - these are paws.
Little bottle paint yellow, form black stripes along the entire "body" of the bee. On the cover to glue decorative eyes. You can draw a marker. From a transparent or brown bottle, cut an average value (wings).
Attach the parts made to the base of the container. From the narrow strips cut from the same packaging as the wings, make the paws. Between the wings make a hole through which you can sell thread - such a detail will allow you to hang the insect.
Cut from plastic packaging soft part, forming a canvas in the form of a rectangle. In accordance with the size of the foundation, pick up the stencil of the butterfly. To impose a plastic basis for stencils, fix the components in 4 points with clothespins or stationery clamps. Crop the circuit marker, carrying the drawing on the plastic.
To lay a sketch on the board and cut the form using a stationery knife along the contour. You can additionally cut some parts of the wing pattern. Nail polish can be painted the product on the outlined lines. To give brilliance, you can use fates, beads and rhinestones.
Prepare 20-25 brown plastic containers. A transparent base is suitable, which will then have to paint. Cut all spare parts in half. Make a fringe, cutting strips to a dense place in the neck area.
An assembly is made - insert bottles in each other. On the first container draw the eyes of the animal. The plug is an animal nose. On the "needles" you can put an apple made of bottles.
Pick the ball for table tennis and container, the diameter of which will be like a sports projectile. Additionally, you will need cocktail straws, glue, scissors, English pin.
Procedure:
On the lid glue the tail, which is made of cocktail straws. The model of this part of the helicopter can be made according to the present aircraft.
Matryoshka is manufactured by using two techniques - work with plastic containers and papier-mache. Pick up the most curly container. On the surface glued pieces of white paper, which are moistened with PVA glue.
Cut hard throat. Hole to close the same principle as the base of the bottle. When the base dry smooth the surface with a wet bruster. Drain the workpiece on the sketch of the matryoshki. You can use for these purposes gouache or acrylic paints.
Prepare 2 containers - a capacity of 2 l and 0.5 liters. Cut with a greater bottom, draw red paint. Make white dots. Lower capacity to handle white paint. From paper cut a rectangle, on the one hand to form a fringe.
Glue the middle of a white bottle. Fix the "cap" a mumor on a white leg. You can make an additional amoor of smaller sizes and glue to the greater element.
From a plastic bottle, not only decorations or children's toys can be made, but also functional products are relevant in everyday life.
Options:
It is possible to make the craft to decoratively, by using paints, rhinestones, beads, glass stones, beads, ribbons. It is possible to attach elements to a plastic bottle by using a building staple or adhesive gun.
Article clearance: Natalie Podolskaya
Crafts from a plastic bottle with their own hands - a video structure for the manufacture:
