Heating system and the supply of hot water turns a private house In a comfortable dwelling, providing considerable savings and no appetizers of resource providers.
Installing your own boiler allows you to independently adjust the heating mode, based on the need and climatic conditions, and not an average annual charter supply schedule.
The choice of equipment in the trading network is extensive, but it is quite difficult to find the most successful option.
The cost of European boiler models is too high, the quality of domestic samples often leaves much to be desired.
Consider one of the most successful options that combine the available cost and high quality.
Navien gas boilers are products of the South Korean industrial concern Kyungdong Navien.
The company specializes in the production and design of heating equipment operating on different types Fuel - liquid, solid, gas and electricity.
Navien Deluxe is a series of two-circuit wall-mounted gas boilers, which has replaced with the production of the Navien Ace family.
The design and set of functions have practically not changed, although some points are improved and supplemented.
The aggregates perform the flow of the coolant (s) into the heating system and simultaneously provide a dwelling hot water (DHW).
Korean developments were carried out taking into account Russian conditions and specialized in working with unstable parameters in all directions - gas pressure and water, electricity fluctuations. The equipment fully complies with the standards and standards in force in the territory of the Russian Federation.
Naven boilers are equipped with a special device compensating for voltage fluctuations in the network up to 30%.
The Deluxe series includes the following boiler models:
Three first models are practically no different from each other, having only minor discrepancies in the design of the chimney or the gas supply value.
The model atmo is the boilers with an open combustion chamber, which differ directly from the room directly from the room.
All types of boilers are produced in different options By power:
Some models are created on the basis of one size with a software limited functionality.
Thus, the boilers with a capacity of 24 and 16 kW are an identical design, but 16 kW models have a slightly reduced power. This gives the aggregates a noticeable power supply, allowing you to freely overcome the load changes and external influences.
Consider specifications Boilers Navain Deluxe:
Some changes or additions are possible in the values \u200b\u200bof the parameters of boilers arising from the improvement of the design by the manufacturer.
To the advantages of Navien Deluxe boilers:
The disadvantages of the aggregates are:
All features of the Navien Deluxe boilers are essentially specific signs of the design and may well be compensated for correct operation and maintenance.
The Navien gas-rounded boiler produces heating of the coolant and ensures its circulation in the system.
Gas burner combined with primary tubular heat exchanger, heats the stream of OS, which passes through a three-way crane.
To obtain a given temperature, a mixing of a certain amount of cooled repetition is mixed, after which the coolant is sent to the system.
The combustion mode is regulated by the fresh air supply, which fan performs.
Hot water heating produces a secondary heat exchanger (plate). The operation of all devices is controlled by the sensor system signaling on the control board on the appearance of certain problems.
Gas double-circuit boilers Navien Deluxe are designed for heating and gWS feed in private houses.
The boiler power corresponds to the serviced area, which makes it easier to choose the desired device.
For heating industrial or public buildings, the use of the Navien Deluxe series is not recommended, since the specific capabilities of the equipment in such conditions will not be disclosed to properly.
Often, such equipment is installed in apartments if their size allows you to install such power equipment.
In the package of boilers, Navain includes:
Depending on the model and the series, some additional nodes may be present. Constant development and improvement of the design contributes to the complication of the old and emergence of new elements.
The work of Navien boilers passes in automatic mode and practically does not need human participation.
The only thing that is required from the owner is the installation of a comfortable temperature. If used as fuel liquefied gasIt is necessary to monitor the timely replacement of cylinders.
The possibility of long-term operation without specialized service checks is a feature of equipment from Navien, which is convenient for users and removes the care of the state of the aggregate.
When any faults appear on the display, the code of the corresponding error appears, the water pressure shows a pressure gauge that allows you to detect the leakage of the system.
The owner may require the acquisition and installation of a special filter or water softener, which will allow to extend the life to most boiler knots - heat exchanger, pump or three-way crane. If the water supply is made from its own well, the installation of the softener becomes a necessity.
To configure the boiler, set the debug mode. Then you should adjust the gas pressure limits to a minimum and maximum.
Of circulating pump It is necessary to release air, unscrew the plug. It is carried out after a set of pressure when circulating.
Setting the boiler operation is produced using a dip switch.
All shifts must be performed when the power is turned off.
The setting of the boiler should be entrusted by specialists from service Center. Independent performance is possible only with the urgent need and the absence of a warranty agreement.
The faults appear on the display as a numeric code. Each of them corresponds to a certain error, i.e. Signal from a specific sensor to refuse the corresponding node.
Perhaps the presence of additional codes with which you need to carefully read in the user manual.
The most reliable and unbiased information about the properties of the boilers of the Korean company can be obtained only from people using these aggregates for heating and supplying DHW in their homes.
Consider some of the reviews.:
((ReviewSoverall)) / 5 Rating owners (7 votes)
Your opinion
0"> Sort by: The latest highest score is the most useful worst score
Be the first one to leave a review.
Instructions for use gas boiler Naven colorfully describes a sequence of execution of commands to manage this device, which is capable of operation under such conditions when technology from competitors simply stops.
In favor of this says how completely electronic system Management and key principles used to adjust the boiler operation. Naven, the product from the Korean manufacturer is reliable, steady, can cope with frankly emergency operating conditions.
The boiler is distinguished by a low price. Nevertheless, the instruction of the gas boiler is very detailed, the installation of any modes is thoroughly painted. Thus, it can be understood how seriously the manufacturer approached the report of the main aspects of the management of the usual buyer. Users will not have problems with setting up and using the device.
The same goal follows the system electronic controlas well as adjusting other key parameters. To understand how universal equipment is Navien, we give a brief list of its abilities for work under non-standard conditions.
The equipment of this company provides for the advanced management principle. The remote from which the parameters and modes are configured - remote. It is also used as an external thermostat sensor, to measure and maintain the temperature indoor.
The engineering features of the products of Navien, which set the high parameters of its quality, and also confirm the opinion of some experts on the unlimited work period of boilers include the following facts.
With all the functionality, stuffing with electronics, convenience and ignoring difficult working conditions, gas boilers Navain is not devoid of some flaws. Users often encounter cases when the device refuses to work, since the electronics signals a critical error. This occurs for various reasons, including those associated with the high sensor sensitivity. Consider two most frequently repetitive errors.
Smoke removal
During problems with the removal of combustion products, a malfunction code of 10 gas boilers is arising. According to the user manual, the reasons for such a signal may be several:
Most often, users have the following picture:
Many are upset, thinking that the problems in the work of the turbine. However, oddly enough, most often the reason consists in strong wind on the street. As the manufacturer declares, it is recommended to mount boilers with the condition of the chimney to the lever side of the building.
As a result of the fact that at different times of the year the wind blows in different ways, so the heating systems can refuse to operate on the sensor signal, signaling about the malfunction 10. One of the solutions methods is the alteration of the chimney.
Since it will not work promptly to do it, you can open the device body and disconnect the air supply nozzle. The turbine will start selecting it from the room, the boiler will work. Decision temporary, but works.
A malfunction error 03 gas boilers is caused by poor fuel quality. Mechanics of the emergence of the problem is:
The problem is solved solely by the method of selection. The first thing to be verified is the purity of gas supply nozzles. If they are clean and fuel supplied, the second stage should be selected the position of the sensor electrode. It must be in the hot flame phase so that the signal is correctly identified.
This error is the rarity where gas is served good qualitySince this company's products are perfectly coping with any pressure indicators. But in the territory of the regions with low quality gas preparation, a malfunction with code 03 is quite common. Sometimes you have to change the position of the sensor electrode several times in one heating season.
In general, the manufacturer's heating system is quite cheap, technologically equipped solution, ideal in order to cope with non-standard working conditions. They can be extremely useful because very reliable and durable. All components are manufactured by Korea and Japan enterprises, the quality assembly, the boilers meet all international standards.
Like any complex device, boilers are not devoid of problems. However, in most cases the user does not face trouble during the operation of the equipment from this manufacturer.
If we consider the turnover of the heating devices in the domestic market, then it can be noted that consumers prefer European techniques. However, Korean is a mounted cauldron, the price of which is lower than Western counterparts, takes up top positions among other heating devices. This is due to the durability of the products and the presence of warranty service. Also read: "Gas boiler from Beretta - simple, reliable and functional"
Made in Korea.
The company from Asia loudly declared itself and its products, because the choice of European brands has declined. The Korean firm products can compete with gas aggregates of any European manufacturer. Therefore, the NaVien gas boiler is only positive users.
One of the most popular and reliable is the two-circuit boiler attachment of the ACE lineup. Such instruments may have an open or closed Camera combustion. The functional component of the device is distinguished by durability, which users and specialists mark. At the same time, the price of the mounted boiler is much lower than equipped, which offers European brands.
The line is represented by several devices:
The last model is worth considering first. This boiler is presented in two variations - Korea and Coaxial. Wall equipment for heating system has a rated power of 13-40 kW. In this case, this indicator does not depend on the modification. Gas boiler Navien, according to reviews, ideal for use in the climatic conditions of our country.
The equipment is characterized by the ability to work in difficult operating conditions: pressure drops in the gas pipeline, with voltage drops in the power supply network. Even being not included for a long time, such a boiler will start without problems and perform its functions for 100%.
Compact placement of boiler elements.
The wall double-circuit boiler is characterized as follows:
Wall-mounted equipment has "brains". This means that the unit ensures that the coolant does not freeze in the pipelines of the heating system. Automation is triggered in two cases. The first is when the water temperature drops to 10 degrees. This time turns on. The second situation occurs at a coolant temperature of less than 6 ° C. In this case, the gas burner is included, heating the coolant to 21 degrees.
The double-circuit boiler Navien Ace Turbo and the 16K model will operate when the power supply voltage is reduced to 30%. The Navien ACE 16K instructions also indicate that the boiler will not turn off when the water pressure is 0.1 bar.
Products Navien reviews have positive. This is due to a long period of use, high efficiency of the unit. The equipment is characterized by high fuel and electricity savings. This contributes to the availability of turbocharging and the APS sensor, which monitors air pressure.
In the boiler installed uninterrupted voltage.
Among the company's products there are double-circuit boilers with turbocharging and without it. The latter belong to the ACE ATMO line. They possess the same functions as the equipment with turbocharging. Korean gas boilers Navien Ace reviews have a large positive, which once again testifies to product quality.
Such an aggregate is equipped with the same chip that is uninterrupted with the voltage jumps in the power supply network as the above-described models. A distinctive feature of the device is the absence of turbocharging, thereby ensuring a silent job.
NAVIEN ACE 20K, like other Korean brand units, is fully adapted for the climatic conditions of Russia. The device is safely operating at low gas pressure and water, which allows them to be used in multi-storey residential buildings. This expands their scope. The organization of removal of combustion products can be carried out in different ways:
It is important to note that some variations of equipment from Navine support remote control using a phone or tablet.
Navien is a major South Korean corporation, which produces universal, high-quality and reliable gas boilers. Navien devices are distinguished by reliability in work, practicality and functionality. These devices have an open or closed combustion chamber, their functional part is distinguished by durability. At the same time, their cost is lower, if compared with European counterparts.
NAVIEN ACE gas boilers are not afraid of low gas and water pressure, they are not afraid of voltage drops on the network. The operation of gas boilers is characterized by a long period of operation and cost-effective gas consumption. All NAVIEN gas devices comply with the standards and norms of the Russian Federation and have relevant certificates.
If the room temperature drops, then the automatic protection system is triggered From freezing. When lowering the water temperature of heating more than 10 degrees Celsius, the circulation pump is automatic, resulting in a constant circulation of the coolant in the heating system. If the water temperature of heating drops to 6 degrees Celsius, the burner is automatic and the coolant is heated to 21 degrees Celsius.
According to the instructions, the voltage can vary within ± 30 percent, due to the operation on the microprocessor of the SWITCHED - MODE POWER SUPPLY (SMPS) protective chip. Wherein the work of the boiler does not stopthat extends its period of operation and prevent breakdowns.
The conditions of operation of heating and hot water:
Navien gas boilers differ in small size and low weight, it is convenient to transport them, they are easy to install and have the opportunity rational use Room area. For the convenience of installation, connecting tubes are located on both sides of the device, due to which the blockage and installation of the NAVIEN ACE gas boiler is largely simplified.
With low temperature indicators, the viscosity of the fuel increases, as a result of which the effect of paraffinization occurs that significantly worsens the flammability of diesel fuel And the operation of the gas boiler Navain becomes unstable. Such a feature of the work is relevant for regions with a harsh climate, so the arctic and winter diesel fuel has been created for these conditions.
Gas devices Navien work on any diesel fuel russian production However, the cost of winter or arctic diesel fuel is much higher than the summer, and the use of summer fuel is not possible at low temperature values \u200b\u200bwithout preheating it.
The heating element, which is built into the NaVien gas unit burner before applying fuel to the nozzle, pre-heats it, resulting in high-quality spraying of fuel and uninterrupted flammability. Due to preheating in the gas boilers, Navien Ace has the possibility of using inexpensive summer diesel fuelWhat leads to significant savings.
1. The heat exchanger is made of stainless steel
For the production of heat exchanger, stainless steel is used, so it is not subject to corrosionthat significantly prolongs the service life of the Navien Ace boiler.
2. Modern diesel burner
Due to modern effective diesel burner Low noise stable work with minimal fuel costs. According to the instructions burner can work with any diesel fuel , taking into account all types of fuel production of the Russian Federation.
3. Fuel filter with interchangeable cartridges
The fuel supply system is equipped with a filter for cleaning from unwanted impurities, as a result of which the stable operation of the NAVIEN ACE gas boiler is disturbed. An additional interchangeable cartridges includes the set with the device.
4. Russified control panel
Using a remote fully Russified control panel equipped with a liquid crystal digital display, created the possibility of economical fuel consumption and reduce heating costsAlso permanent maintenance of comfortable room temperature due to the room temperature sensor built into the control panel.
Safety Instructions are provided in each user manual for the NAVIEN boiler, where all important information is available for the safe use of the device. Failure to follow any instructions may result in death, serious injuries and damage to the product being operated.
On the Navien Ace boiler or in the instructions, the following abbreviations and signs can meet:
Navien gas boiler is excellent alternative to expensive analogues European production, not inferior to them in quality and durability. The main advantage over other European devices is the presence of warranty service.
Updated:
2016-09-16
Copper Naven is a high quality South Korean heating equipment. The company is engaged in the production of modern gas boilers. This product quickly gained confidence from consumers, has become a regular participant in the domestic market, significantly expanding the possibilities of buyers to choose the perfect boiler.
Photo of the boiler Navain
Wall and floor boilers from Naven have a number of features that allocate them against the background of competitors.
With the features of the design of boilers, I talked with you. These are four objective reasons to pay close attention to such models as the Navien Ace and Deluxe, Prime boiler.
If you put the boilers Navien in one row with competitors presented in the domestic market in about the same price category, the South Korean manufacturer will demonstrate a number of obvious advantages:
The range of the South Korean company Navien is constantly expanding, which allows customers to acquire gas boilers optimally suitable for all parameters.
Therefore, to tell about all representatives of the model range is impossible. Instead, we will look at the equipment of Navien, which can be divided into three large categories.
Choosing boilers from the company Navien from Deluxe series, Ace or other assortment, you buy quality and reliability. This is one of the few cases when the manufacturer does not require more only for the brand. The high level of Navien boilers is no doubt.
If we consider the turnover of the heating devices in the domestic market, then it can be noted that consumers prefer European techniques. However, Korean is a mounted cauldron, the price of which is lower than Western counterparts, takes up top positions among other heating devices. This is due to the durability of the products and the presence of warranty service. Also read: "Gas boiler from Beretta - simple, reliable and functional"
Made in Korea.
The company from Asia loudly declared itself and its products, because the choice of European brands has declined. The Korean firm products can compete with gas aggregates of any European manufacturer. Therefore, the NaVien gas boiler is only positive users.
One of the most popular and reliable is the two-circuit boiler attachment of the ACE lineup. Such devices may have an open or closed combustion chamber. The functional component of the device is distinguished by durability, which users and specialists mark. At the same time, the price of the mounted boiler is much lower than equipped, which offers European brands.
The line is represented by several devices:
The last model is worth considering first. This boiler is presented in two variations - Korea and Coaxial. Wall equipment for heating system has a rated power of 13-40 kW. In this case, this indicator does not depend on the modification. Gas boiler Navien, according to reviews, ideal for use in the climatic conditions of our country.
The equipment is characterized by the ability to work in difficult operating conditions: pressure drops in the gas pipeline, with voltage drops in the power supply network. Even being not included for a long time, such a boiler will start without problems and perform its functions for 100%.
Compact placement of boiler elements.
The wall double-circuit boiler is characterized as follows:
Wall-mounted equipment has "brains". This means that the unit ensures that the coolant does not freeze in the pipelines of the heating system. Automation is triggered in two cases. The first is when the water temperature drops to 10 degrees. This time turns on. The second situation occurs at a coolant temperature of less than 6 ° C. In this case, turns on gas-burnerHarring heat carrier up to 21 degrees.
The double-circuit boiler Navien Ace Turbo and the 16K model will operate when the power supply voltage is reduced to 30%. The Navien ACE 16K instructions also indicate that the boiler will not turn off when the water pressure is 0.1 bar.
Products Navien reviews have positive. This is due to a long period of use, high efficiency of the unit. The equipment is characterized by high fuel and electricity savings. This contributes to the availability of turbocharging and the APS sensor, which monitors air pressure.
In the boiler installed uninterrupted voltage.
Among the company's products there are double-circuit boilers with turbocharging and without it. The latter belong to the ACE ATMO line. They possess the same functions as the equipment with turbocharging. Korean gas boilers Navien Ace reviews have a large positive, which once again testifies to product quality.
Such an aggregate is equipped with the same chip that is uninterrupted with the voltage jumps in the power supply network as the above-described models. A distinctive feature of the device is the absence of turbocharging, thereby ensuring a silent job.
NAVIEN ACE 20K, like other Korean brand units, is fully adapted for the climatic conditions of Russia. The device is safely operating at low gas pressure and water, which allows them to be used in multi-storey residential buildings. This expands their scope. The organization of removal of combustion products can be carried out in different ways:
It is important to note that some variations of equipment from Navine support remote control using a phone or tablet.
Navien gas boilers are distinguished by compact dimensions, as well as meet all European quality standards and safety and comfort requirements that such an equipment must comply. Gas boilers are made from high quality material, differ in quality, efficiency and reliability. Read the instructions for connecting the gas boiler Weilant.
The most important advantage of heating gas equipment Navain is the adaptability to the difficult conditions of the Russian climate, to the low level of incoming pressure of the liquid coolant and gas, as well as to constant voltage jumps in the electrical network.
Initially, the boilers are not configured to work with natural gas, but it is possible to translate some models of the boiler for liquefied gas. To do this, you will need to purchase a collector with nozzles.
Gas boilers are capable of working even on poor-quality fuel. They do not notice voltage drops, even if the jumps reach a level of 30%.
A gas heating device failure can occur only if the pressure level is reduced in heating systemBut this fact becomes "+", because when leakage of a liquid coolant, the boiler will stop working, which will protect the entire system from more serious problems.
All heating gas boilers are covered with anti-corrosion material.
Also, the cost of gas boilers Navain makes it affordable almost for the entire population of the country.
On the russian market Heating devices Company Navain provides products for the following types:
Installation and primary configuration of the heating equipment of the company Naven is made by specialists of the technical support service. Often the company seller along with delivery offers installation and adjustment of equipment. Do not give up this, because independent installation And the primary start can deprive the consumer warranty. This can be found in the instructions that attached to the boiler.
In accordance with the completeness of the Navien heating equipment set, together with the gas boiler, the consumer receives a warranty card, fasteners for installing a gas boiler, the heating unit itself and the instruction manual.
If suddenly, the heating equipment of Navain will fail, it is necessary to produce a setup only in the presence of a technical center specialist or when calling a wizard from the company's company to the house. It is not worth using a gas heating boiler on their own, because such manipulations may lead to serious consequences (damage to property and physical harm to people living in the house).
Any equipment and, in general, technique, sooner or later, may fail. The main problem with which boilers are faced by Navien:
Error 03, Gas supply problem.
Often such a problem arises from low pressure In the gas pipeline or due to the blockage of the gas pipeline mud or condensate. Read and about their typical faults.
Coaxial chimneys - this is a design that is different high levels Strength and reliability. Coaxial unit is necessary for removal of waste gas. It is a double tube: one larger diameter than the second. There are no pipes among themselves. This "device" is needed for gas boilers. You can purchase chimneys from the manufacturer, as well as its partners.
Instructions for the use of gas boiler Navaine colorfully describes the sequence of execution of commands to manage this device, which is able to act under such conditions when the technique from competitors simply stops.
This is in favor of this, both fully electronic management system and key principles applied to adjust the boiler operation. Naven, the product from the Korean manufacturer is reliable, steady, can cope with frankly emergency operating conditions.
The boiler is distinguished by a low price. Nevertheless, the instruction of the gas boiler is very detailed, the installation of any modes is thoroughly painted. Thus, it can be understood how seriously the manufacturer approached the report of the main aspects of the management of the usual buyer. Users will not have problems with setting up and using the device.
The same goal follows the electronic control system, as well as adjusting other key parameters. To understand how universal equipment is Navien, we give a brief list of its abilities for work under non-standard conditions.
The equipment of this company provides for the advanced management principle. The remote from which the parameters and modes are configured - remote. It is also used as an external thermostat sensor, to measure and maintain the temperature indoor.
The engineering features of the products of Navien, which set the high parameters of its quality, and also confirm the opinion of some experts on the unlimited work period of boilers include the following facts.
With all the functionality, stuffing with electronics, convenience and ignoring difficult working conditions, gas boilers are not devoid of some flaws. Users often encounter cases when the device refuses to work, since the electronics signals a critical error. This occurs for various reasons, including those associated with the high sensor sensitivity. Consider two most frequently repetitive errors.
Smoke removal
During problems with the removal of combustion products, a malfunction code of 10 gas boilers is arising. According to the user manual, the reasons for such a signal may be several:
Most often, users have the following picture:
Many are upset, thinking that the problems in the work of the turbine. However, oddly enough, most often the reason consists in strong wind on the street. As the manufacturer declares, it is recommended to mount boilers with the condition of the chimney to the lever side of the building.
As a result of the fact that at different times of the year the wind blows in different ways, so the heating systems can refuse to operate on the sensor signal, signaling about the malfunction 10. One of the solutions methods is the alteration of the chimney.
Since it will not work promptly to do it, you can open the device body and disconnect the air supply nozzle. The turbine will start selecting it from the room, the boiler will work. Decision temporary, but works.
A malfunction error 03 gas boilers is caused by poor fuel quality. Mechanics of the emergence of the problem is:
The problem is solved solely by the method of selection. The first thing to be verified is the purity of gas supply nozzles. If they are clean and fuel supplied, the second stage should be selected the position of the sensor electrode. It must be in the hot flame phase so that the signal is correctly identified.
Such an error is a rarity where gas is provided with good quality, since this company's products are perfectly coping with any pressure indicators. But in the territory of the regions with low quality gas preparation, a malfunction with code 03 is quite common. Sometimes you have to change the position of the sensor electrode several times in one heating season.
In general, the manufacturer's heating system is quite cheap, technologically equipped solution, ideal in order to cope with non-standard working conditions. They can be extremely useful because very reliable and durable. All components are manufactured by Korea and Japan enterprises, the quality assembly, the boilers meet all international standards.
Like any complex device, boilers are not devoid of problems. However, in most cases the user does not face trouble during the operation of the equipment from this manufacturer.