House, design, repair, decor. Yard and garden. Do it yourself

Buderus Logano. G234 is an outdoor gas cast iron boiler. The model is equipped atmospheric gas burnerallowing to perform a preliminary mixing of the incoming gas. The power of the boiler of the specified model is 60 kW.

Features of the model Buderus Logano G234

• Models are equipped with a set for reference. Its presence allows you to switch the boiler for the consumption of another type of gas. For example, with natural on a liquefied or a mixture of propane and butane.
• Also the boiler is possible to combine with other water heating systems and control blocks from the manufacturer.
• The heat exchanger in the boiler is made of cast iron. Due to this, its durability will allow "survive" similar models with heat exchangers from copper and steel.
• The design of the burner does not have mobile parts, which favorably affects its reliability. It is worth noting that constructively Buderus Logano G234 comes with open camera combustion. It provides their location in a separate basementSince air to maintain the combustion process is closed from the room.
• Another advantage in the direction of choosing this model will be a low noise level, thanks to which the boiler is practically not heard during operation.
• The modular control system and connecting other boilers and tanks involves the possibility of increasing the possibility of the heating system. Potential gas boiler Already in the basic performance enough to ensure the heating of the room up to 400 m2.

Specifications of the Buderus Logano G234 model

• nominal thermal production on natural gas is 60 kW,
• thermal incineration capacity - 65 kW,
• temperature flue gasesemerging in the chimney - 95 ° C,
• required thrust level for the correct operation of the boiler - 3 Pa,
• the maximum permissible temperature of the supply line - 115 ° C,
• permissible working pressure should not exceed the figure of 4 bar,
• distribution of carbon dioxide not more than 5% at the time of maximum load, which makes this boiler model one of the most eco-friendly and harmless to human health,
• the weight stream of leaving flue gases is an indicator of 0.05 kg / s.

Installation of the boiler Buderus Logano G234: Step-by-step instructions

1. The boiler itself comes with a kit, in which there is a built-in flow fuse, a built-in burner and a control device, which is packaged separately from the overall design.

2. When installing it is worth considering that when installing the boiler, it is necessary to leave free space from the walls. The distance from the back of the wall of the boiler to the wall of the room should be at least 50 cm, the same applies to the neighboring wall, if it is planned to place a heating boiler closer to the corner.

3. The surface of the floor at the same time should be smooth. Even the presence of minor drops by gender is not allowed. Since the boiler during operation does not publish vibrations, then clinies or other gaskets are allowed for problem areas designed to ensure the stability of the design.

6. Montage electrical system It is much more complicated and a lot of stages are included:

• first, the protective cover and housings of the connective terminals are removed,
• the pressure control device is inserted into the grooves,
• tubes of temperature sensors are inserted into the cutout on the front of the casing,
• next, the structure of regulation is slightly shifted into the groove so that the rear items entered their grooves,
• the device is screwed with screws to the cover of the housing,
• after that, according to the instructions, a step-by-step connection of all items in the electrical circuit is carried out.

It is important to remember that only a certified representative of the company should be installed, connecting and testing the performance of the boiler. Otherwise, warranty service agreements are automatically canceled.

After the installation of the boiler, all the elements are checked for the presence of a proper degree of tightness. When checking, the control pressure on the burner reaches an indicator of 150 mbar.

Solid fuel boilers Budrus - Overview of Cast Iron and Steel Models

5 (100%) Votes: 1

Today, heating units operating on solid fuel do not lose their popularity. They are widely used in areas in which there is no connection to gas highways. In the article, we will look at what is solid fuel boilers Buderus, we note the principle of their action, dignity and disadvantages.

Solid fuel boiler Buderus Logano S111-2-16 WT

Device and principle of operation of a solid fuel boiler Buderus

The technical characteristics of the Buderus solid fuel water units are significantly higher than that of the analogs produced by other manufacturers. High heat efficiency indicators are in direct dependence on constructive features equipment.

Check the price and buy heating equipment and related products you can have. Write, call and come to one of the shops in your city. Delivery throughout the Russian Federation and CIS countries.

Consider what is the functionality of the Buderus solid fuel boilers:

1. The manufacturer from Germany constructed such a system that greatly simplifies mounting work. In the housing of the aggregates there are several different taps required for connecting to heating system And boiler indirect heating.
2. The principle of functioning of household solid fuel boilers of prolonged burning Budrus is that in the process of heating, they use gas generation mode. The specifics of this work lies in the ability of any kind solid fuel Select gas. IN certain conditions (When the oxygen flow is limited and the temperature mode exceeds 200 ° C). CO is burned in a separate chamber, it is also provided to obtain additional heat.
3. Steel pyrolysis boilers operating on solid fuel are designed from two heat chambers. In one - the process of combustion of fuel is carried out, after the survivors produced during the gases are produced.
4. Boilers Buderus - absolutely universal, can be operated on:, woodworking waste. In other words, they are absolutely unpretentious to the type of fuel.
5. Buderus aggregates are safe. The coal-wood pyrolysis boiler is equipped with a multi-level protection against coolant overheating. The automation is responsible for adjusting the combustion process. Also in the design there is a protective valve that protects the device from overheating. Auxiliary safety can be achieved thanks safety Groupwhich is mounted on the feed heat carrier.
6. A solid fuel boiler Buderus made of steel and cast iron is used to connect to heating systems with natural and coercive circulation of the coolant. The performance of household models is enough to supply the heat of the premises whose area reaches 500 m². Water heating with the use of boilers of this brand is suitable for industrial premises, shopping centers, warehouses.
7. In the package of aggregates includes steel or cast iron heat exchangersEach of the species has its pros and cons. Cast iron models have high heat specifications and long service life. Models made of steel - weigh less and their cost below.

TT boiler Buderus is designed for heating when permanent accommodation. At minus temperature, the water coolant freezes that it is fraught with a discontinuity of the contour and the failure of water-heating equipment.

Varieties of boilers on solid fuel Buderus

The company produces several modifications heating devices On solid fuel, which are based on manufacturing material.

1. Cast iron aggregates Buderus are long-burning devices. They are equipped with a fan or turbine, which serves air to the moving chamber. Models are presented in five variations with different power indicators. Fuel is ordinary wood or pellets, coal or coke. Mounted devices in the heating systems of the pumping or gravitational type as autonomously and in conjunction with gas or diesel heating devices. The technical characteristics of the Buderus solid fuel boiler make it possible to use it for the heat of large houses, production premises, the size of which is not more than 400 m². The products are characterized by a long fuel combustion process, they are economical, the design of them is distinguished by the reliability and simplicity of installation. Due to the fact that the devices are very compact, you can install them in small rooms. In the quality of the minus, which is common to all models, it can be noted - the need to constantly load the fuel personally. The exception is the innovative development of the company - the boiler solid fuel Buderus Logano G221 / A, which is equipped with an automatic fuel supply. It has a high productivity, the efficiency reaches 80%, but the price of it is much higher than that of other models. The cost of such an aggregate is approximately 190,000 - 215,000 rubles.
2. Long burning boilers made of steel with a large loading chamber. Available in 8 variations with a capacity of 12 to 45 kW. Turn such devices can be firing, coal and coke. According to the instructions, the steel solid fuel boiler is mounted in pressure and gravitational heating systems as an autonomous or auxiliary element in conjunction with gas and diesel equipment. It can be installed in apartments, cottages, small in size or industrial premises whose area varies between 120 to 300 m². Thanks to the impressive sizes of the furnace, the unit can operate in long-term combustion mode. Thanks to the built-in economizer, thermal energy The room is distributed effectively. User feedback indicate that solid fuel boilers Buderus have no serious shortcomings in their work. In order for the combustion process to be more efficient before shipping coal into the furnace, it is necessary to sort it up to separate a large one. The price of appliances from steel is slightly lower than that of cast-iron analogs. For example, a 24-kW boiler, designed to heat the square in 190 m², costs from 38,000 to 52,000 rubles.
3. Universal prolonged combustion devices Steel pyrolysis type are equipped with primary and secondary combustion chambers. They are produced in four variations, the power of which varies in the interval from 18 to 38 kW. The maximum size of the lane, which can accommodate the heat chamber is 58 cm. Also, the aggregates are equipped with the control panel, which is responsible for adjusting the fan operation, and their package includes a smoke activation system that does not allow smoke to the room when the flue compartment is opening. The ash tick is laid out with refractory brick from the chamot. Such aggregates can be used in the heating of the pumping or gravitational type for the supply of heat of cottages and industrial facilities, the area of \u200b\u200bwhich reaches 300 m². The key advantage of the products of this series is that they consume much less fuel. At the same time, their performance is 5-7% more than other models of solid fuel boilers. Gar in them practically does not appear, so every week it is not necessary to clean the furnace. As minuses, a large price can be distinguished, which is equal to 90,000-110,000 rubles.

The most popular models of boiler boilers

Consider the most well-known and widespread models and note their characteristics.

Logano S131

This model It is a solid fuel boiler that copes well with heating of small houses. Today, this model is produced in one variation, the input power of which is 15 kW. To some extent an aggregate acts as a long-burning boiler. Thanks to the structural features and special settings, you can include the mode of slow burning and gradual fuel. The key advantage of such a device is increased reliability. The combustion chamber with a wide door has a volume of 38 liters. If you load it completely, the fuel will burn more than two hours. However, there are also cons model, for example, to clean the grate, you first need to resort to dismantling it.

Boiler Buderus Logano S131-15H RU

The combustion efficiency to some extent depends on the quality of the chimney.

Logano S171 W.

This sample is a full-fledged pyrolysis boiler, which is performed from heat-resistant steel. The model was created on the basis of preceding, but it has many new features, due to which the efficiency of the heating unit has increased. Due to the fact that such material as steel cannot provide reliable protection and preservation of heat energy, the manufacturer took care of it and uses chamotte brick, which is characterized by a high heat capacity and good resistance to exercise. The characteristics stated in the instructions indicate that when complying with all installation rules, the efficiency of the device can reach 90%.

Boolel Budyrus Logano S171 W

Logano S 171 W is available in several variations that differ in the volume of the loading chamber and power indicators:

• 110 l - 20 kW;
• 110 l - 30 kW;
• 133 l - 40 kW;
• 133 l - 50 kW.

Coolants in all aggregates usually function when temperature mode ranging from 70 ° C to 85 ° C. The time of continuous operation on one download can be 3-8 hours.

You can configure the hardware in such a way that you will automatically receive an SMS tolerance with the state of the instruments currently.

Solid fuel boilers of long burning Buderus Logano G221

Such boilers are very popular today, equipped with a heat exchanger of long burning made of cast iron. The design is very reliable and simple. Most often, they are mounted in private houses and industrial premises, with an area of \u200b\u200bup to 400 m².

Boiler on solid fuel Buderus Logano G221-20

In the chamber you can download not only coal and firewood, but also coke. The operating temperature of the fluid in the heat exchangers does not fall below 90 ° C. The efficiency is approximately 80%.

This model is represented by a whole line with units of different capacities: 20, 25, 32, 40 kW.

According to the manufacturer. The device described is a universal highly efficient boiler that can work together with other devices working on diesel fuel or gas.

One of the main advantages of the model is the presence of an improved unit of automatic fuel supply to the combustion chamber.

Logano S181 E.

Logano S181 E from "Budrus" - solid fuel pellet boilers of long burning. Their design is equipped with a special spare bunker, thereby ensuring the automatic feeding of such fuels such as pellets and coal.

After one-time loading, the equipment can work smoothly for about fifty hours, during this time you can not approach it, constantly checking the availability of fuel and serviceability. If any violations occur or breakdowns, automation will instantly inform the user. The company presented in the market of heating devices model Logano S181 E in three versions with different power indicators: from 15 to 25 kW.

Steel automatic boiler Buderus Logano S181 E

In addition to the above-described models are widely popular with solid fuel boilers Buderus. Logano S111 2 and Buderus Logano G221 20, because These aggregates have proven themselves in the market.

The German company Buderus, which is part of Bosch Thermotechnology GmbH, came out russian market Not so long ago - in 2004. Thanks to the professional approach to the heating system, as a single whole manufacturer carries out comprehensive supply of energy efficient heat equipment.

Among innovative products, boilers Budyrus deserve special attention, whose technical specifications are developed by the company's specialists for the economical, safe and environmentally friendly functioning of equipment.

A variety of model range

The line of thermal generators of German production is classified by several parameters:

• Mounting (wall or floor).
• Type of fuel used (diesel, gas, electrical, solid fuel and combined).
• View of the combustion chamber (open or closed).
• Heat exchanger material (cast iron, copper or steel).

Simple I. affordable way Integrated to solve the problem of heating and hot water supply is the installation of a two-circuit wall boiler. Heating carries out the bittermic thermogenerator with a flowing method up to 40-60 ° with a capacity of 10-15 l / min. This volume of stream is enough for a maximum of two water intake points located at a short distance from the source.

Representative of the two-door model - Gas wall-mounted boiler Buderus Logamax U044-24K is a 24-kW circulation water heater, working with a rigid priority on the DHW. Due to the built-in turbine, it is quickly adapted to the required volume of hot liquid of a given temperature.

One-connecting heater is able to provide heating in a complex bundle with a boiler indirect type. For example, the household heating boiler Buderus Logamax U052-28 operates according to the classic scheme: the built-in three-way valve on the temperature sensor "recognizes" gVS mode and switches the flow of the thermoser into the heat exchanger. Such a "union" of the equipment guarantees a constant stream of hot fluid from 60 to 200 liters.

1. Gas boilers Buderus is released with different functional characteristics:

• With forced or natural burden.
• Closed or open combustion chamber.
• Superior or atmospheric burner.
• With steel or cast iron heat exchanger.
• Single or two-kinning.
• With a capacity from 7.8 to 270 kW.
• Wall or outdoor.

The cost of Buderus U072 gas boilers can be called a democratic - from 26 thousand rubles, which is 2 times less than the price stationary option Installations - from 61 thousand rubles.

2. Gas condensation boilers They are environmentally friendly and economical compared to traditional. Through the use of additional energy of the allocated combustion products, the flow rate was reduced and the efficiency increased significantly (by 10%). The price range of more advanced energy-efficient models begins from 60,000. Rubles.

3. Solid fuel Buderus are represented in the outdoor traditional version. Long burning units with cast iron or steel housing can operate autonomously or as a backup in a series connected bundle with boilers using alternative sources.

Gas generators increase the thermal fuel combustion of solid fuel due to the pyrolysis process of decomposition of organic substances. As a result full combustion Coal or firewood is practically no extraction of organic gases into the environment. The main disadvantage is the price of pyrolysis solid fuel Buderus Logano.

4. Advanced can work on a diesel engine or natural gas depending on the type of burner, which is easily rebuilt. In each design, the thermostream technology is used, protecting the heat exchange surfaces from the formation of condensate and thermoshock. The low-temperature floor combined boiler Buderus Logano G215 due to the optimized furnace of the furnace economically consumes fuel, while ensuring high thermal transmission efficiency.

5. Electric models are silent, compact and easy to use. In the configuration of boilers with a capacity of 2-18 kW comes expansion tank (7 l) and safety valve, which for more powerful options (22-66 kW) are ordered separately.

Comparative characteristics of boilers from Germany Budyrus

Model Buderus.	Features	Price range, thousand rubles
Logamax Plus GB072.	condensation gas boiler wall performance; presented in 2 versions: one-connecting at 14, 24 kW and double-circuit - 24 kW; providing a DHW using stainless steel heat exchanger; built-in three-speed pump and an expansion tank at 12 l; CPD - up to 109%.	61,9 – 68,9
Logamax Plus GB162.	condensation attachment unit Buderus; 3 Power options - 65, 80, 100 kW; the technology of Alu Plus with the new configuration of the heat exchanger tubes ensures maximum power with minimal dimensions; eTA Plus and Flow Plus systems provide fuel consumption efficiency and maximum use heat flue gases; CPD - up to 110%.	203,0 – 327,0
Logano Plus GB312	stationary condensation gas boiler; compact, with an aluminum heat exchanger; 6 power sizes: from 90 to 280 kW; Low noise and emissions into the environment; CPD - up to 108%.	392,8 – 802,0
Logano Plus SB745	condensation outdoor Buderus with a capacity of 800-1200 kW; compact: The furnace chamber is located on top, and the heating surfaces of Kondens - at the bottom; sound-absorbing channels to reduce noise; 2 reverse links are connected to the separation of high and low temperature circuits; CPD - up to 109%.	1 880,0 – 2 375,0
Logamax U072.	gas wall-mounted device with a closed combustion chamber; power - from 12 to 24 kW; uninterrupted work with gas and water pressure jumps; freezing protection; compact.	29,9 – 31,5
Logamax U052.	gas hinged boiler Buderus 7.8-28 kW; single and two-circuit models; closed combustion chamber; bi-Letter Copper Heat Exchanger; the ability to connect to the heat-mall system; KPD - 90-92%.	37,7 – 83,1
Logano S111-2	solid fuel steel unit with a capacity of 12 to 45 kW; coal and coke, 32D and 45D models are designed to use wood; a large loading chamber provides a long burning process; narrow dimensions.	38,3 – 75,8
Logamax E213.	one-connecting electric boiler Buderus with a capacity of 4-60 kW; wall mounting; suitable for any heating system as basic or reserve source heat; 2 types of configuration - with or without expansion tank; KPD - 99%.	41,2 – 70,7

Before buying a boiler Buderus, you need to get acquainted with the main characteristics of the aggregates:

• Type of fuel. The choice of heat source depends on the availability, cost and convenience of use individually for each consumer. Before selecting boilers on the Buderus solid fuel, should be provided special room For equipment.
• Boiler power. This indicator directly depends on the area of \u200b\u200bheated structures and the degree of insulation and is determined by the calculated path.
• Installation type. Wall-mounted devices are compact, do not require a separate room for installation. But higher technical specifications of the Buderus floor boilers allow them to apply them on heat-processing stations capable of providing energy utilities and autonomous enterprises, local heating systems and industrial heating systems.
• Heat exchanger material. The steel thermal transfer element is common due to the low cost and good plasticity of the metal, but it is subject to corrosion exposure and is distinguished by a large volume, which entails fuel overrun. The cast iron has high chemical resistance, but it is susceptible to cracking as a result of temperature difference, and the price is higher. Copper is the most resistant metal corrosion, has low weight and excellent thermal conductivity.

Opinions of users about Buderus

"7 years ago in the village held gas - acquired Buderus Logamax U044-24k. The choice was made by type of installation: the wall does not require a separate room and the installation is simple. Power is enough for home 120 m 2, provides hot fluid for economic needs. "

Anton Pirin, Ivanovo.

"Decided to buy a long burning boiler Budrus in new house from a bar for 150 squares. Bookmarks enough for 12 hours of work - in the morning and evening. There are no extraneous odors and ubiquitous black dust. Connected an indirect heating boiler, now the wood pyrolycress and the house heats, and the water heats up. "

Anna Vanina, Moscow.

"After a long searches for the heating boiler, you made a choice in favor of Buderus Logamax Plus GB072. The house is warm, hot water around the clock. Despite the rather high cost, the condensation unit really allows to save gas consumption - for two years, the bills have decreased by 15%. "

Vlad Yatsenko, Krasnodar.

Buderus Logano SK625. -The low-temperature with a heat exchanger from high quality steel, without a burner, is designed to work on diesel fuel EL according to DIN 51 603, on natural and liquefied gas or rapeseed oil. The boiler works with all diesel and gas fan burners according to EN 267 and EN 676 or burners having a sign of the CE. The noises are significantly reduced during operation due to the sound-absorbing stand under the boiler, the silencer of flue gases and the sound-absorbing burner casing. The trouble-free installation of the burner of another manufacturer on the plate with drilled holes by holes, any diesel or gas fan burner is allowed to install, the test sample of which corresponds to DIN 4787 or EN 267 and DIN 4788 or EN 676, or a burner that has a CE sign. The burner is mounted on the fixed plate. Plate under the burner with drilled holes can be purchased by additional order. If you need to reduce the dimensions during transport, the boiler is possible in a modified version (with a dismantled base frame).

Buderus Logano SK625 Specifications

Buderus Logano SK625.				230	310	410	530	690
Nominal heat production			kw	181-230	231-310	311-410	411-530	531-690
Thermal incineration				193-249	246-335	331-443	437-573	559-746
Length			mM.	2396	2396	2615	2615	2651
			mM.	1835	1835	2015	2015	2015
Width			mM.	920	920	1015	1015	1100
Height			mM.	1615	1615	1713	1713	2050
			mM.	1385	1385	1483	1483	1820
dimensions		Length	mM.	2396 7)	2396 7)	2615 7)	2615 7)	2651 7)
		Width	mM.	710	710	805	805	/890
Support Rama		lGR.	mM.	1716	1716	1895	1895	1895
		bGR.	mM.	710	710	805	805	890
Flow gases		DAA	DN.	248	248	248	248	297
		haa.	mM.	1115	1115	1230	1230	1488
The combustion chamber		Length	mM.	1650	1650	1830	1830	1830
		Diameter	mM.	500	500	600	600	700
Door of the burner		Lt.	mM.	235	235	275	275	310
		HB.	mM.	450	450	487	487	569
Tube burner, minimal depth			mM.	280	280	320	320	355
The feed line of the boiler1 "		Vk.	DN.	80	80	100	100	125
Return line boiler 1		RK.	dN.	80	80	100	100	125
Feed Safety Line2 "		VSL.	dN.	32	32	50	50	50
VK / VSL / RK flange		HF.	mM.	1480	1480	1577	1577	1898
		AI	mm.	516	516	695	695	696
Weight 3)			kg	889	927	1199	1247	1564
Water volume				717	702	803	774	1158
Gas volume				443	454	666	691	971
Flue gas temperature 4)		° C.	139	141	134	137	141
		° C.	157-180	157-187	151-179	154-179	157-188
WEIGHT STOP of the flue gases	Diz-Thal	kg / s	0,0628	0,0845	0,1121	0,1452	0,1889
		kg / s	0,0819-0,1057	0,1044-0,1422	0,1405-0,1880	0,1855-0,2432	0,2373-0,3167
	Gas	kg / s	0,0631	0,0848	0,1125	0,1457	0,1896
		kg / s	0,0822-0,1061	0,1048-0,1427	0,1410-0,1867	0,1862-0,2441	0,2381-0,3178
Size of the boiler			230	310	410	530	690
Content	Diesel fuel	%	13
	Gas		10
Required pressure (thrust)		PA	0
Resistance to the gas tract			1,20-2,00	1,15-2,35	1,55-3,00	1,85-3,35	2,15-4,05
Heating temperature of the coolant to 6)		° C.	115
Permissible excess working pressure		bar	5
Certificate of DGRL			Z-FDK-MUL-01-318-302-16
CE sign, Ident Product number			CE-0085-AR 0449

German company Buderus a few years ago merged with the famous company, in order to start joint production heating equipment. To the Russian market, the company has emerged only ten years ago, but its products have already established itself from the best side and has good feedback Both specialists and consumer themselves.

Let's talk about the boilers of heating Budrus on solid fuel with thermostat. Consider the main sizes and specifications.

Boilers Budrus: Specifications

Solid fuel heating brands Buderus Series Logano S111-2 are used for the heating of a private house, residential and industrial premises with a total area of \u200b\u200b50 to 450 square meters.

Boiler Budrus It is used to work, both in systems with forced circulation of the coolant (pump for circulation) and in self-ejecting systems with natural circulation.

Solid fuel boilers Buderus can be used in parallel with and, as well as with boilers running on diesel fuel in any brand. Also possible installation and installation in already existing heating systems. Boilers have small dimensions, which will allow you to install boilers Budrus in close living rooms or boilers.

Boys Buderus on solid fuel with a capacity of 32 and 45 kW have a sufficiently deep furnace, length up to half a meter. The housing of the boilers is made of high-quality heat-resistant steel, heat exchanger and firefoot itself from cast iron, it tells us that the service life of the boiler will be at least 15-20 years.

Loading solid fuel in boilers is carried out on top. Just raise the top cover and lay fuel. Firewood can serve as this fuel, as well as coal or coke.

Solid fuel boilers Buderus are equipped with a thermostat having a temperature scale. This temperature controller for boiler The heating is screwed into the boiler housing on the side, the chain to the flap is descended from it, which automatically adjusts the air supply to the boiler.

Solid fuel boiler boiler with top loading and thrust thermostat

With this thermostat, you can set the temperature of the coolant in the water jacket you need the temperature shirt, when the valve is shown. In this mode, one cupmark of firewood is enough for 6-7 hours of operation.

On the facial side The boiler is a thermomanometer, which, if necessary, allows you to monitor the temperature and pressure in the system. To protect against overheating of solid fuel heating boilers, you can purchase a water circuit of the cooling, which is not included in the delivery package.

It is also possible to install gas burner for. When buying, be sure to check the bundle according to the instruction manual for boiler boilers.

How to choose the boiler booler

Everything is very simple here. It is necessary to remember the main part of the selection. Practical equipment of any heating equipment, knowing its thermal power and the area you want to drop.

One kilowatt capacity corresponds to heating 8-12 square meters of insulated room, with a standard height of the ceilings 2.5-2.7 meters.

Budrus represents the line of boilers of the Logano S111-2 series having thermal power 12, 16, 20, 24, 27, 32, 45 kW. This means that for the heating of a house of 100 square meters. The meters are quite enough boiler with a capacity of 12 kilowatt.

Boilers Budrus: Prices on manufactured products

Today outdoor boilers Buderus Logano S111-2 with a capacity of 20 kWs have a price of approximately 50,000 rubles *, and a water circuit for cooling 5000 r. * The cost of boilers Buderus entire depends on the euro course.

Watch the video

Boilers are produced in Germany, which indicates the high quality of the goods, but also the prices are respectively higher than on the boilers solid fuel domestic. But if you decide to buy high-quality solid fuel, then it should not save on it. The German quality of goods will allow you to last your boiler for many years.

* - Prices are indicated as of September 2014