Profile compact radiators Kermi Therm. X2 Profil K are made of sheet steel and have a uniform two-layer lacquer coating, which does not emit harmful substances for the environment during the heating mode. The surface of the degreased, treated with iron phosphate, is primed by cathode varnishing according to the method of katofanese dive and powder spraying in accordance with DIN 55 900-FWA. Standard: White Kermi Color (RAL 9016). Color varnishing - on a separate order. 4 lining (for fixing the radiator with a length of more than 1800 mm - 6 linings), including the corresponding installation kit with consoles with holes, installed plugs and air vent. All radiators are tested for tightness and ready for installation. Packed cardboard and covered with film. Protective packaging for mounting.
At the factory, the radio is equipped for use in a two-pipe system, with bypass threaded connection (accessories), is also suitable for use in single-tube systems (for a single-pipe system - setting the valve 8). The quality control system is certified in accordance with DIN EN ISO 9001: 2000. The execution meets the previous directives of the former Baguv (the Union of Insurers at the expense of the federal budget). Certification in acc. with GOST.
Kermi Therm X2 radiators are ideally compatible with all heating systems and, thus, are an excellent response to all demands of the heating technology of tomorrow. Postedy technology X2, with an increased up to 100% radiation intensity, takes care of best use Efficiency of energy efficient sources of heat. Optimal heat transfer to the room and high level thermal comfort even at low system temperatures. So, Thermm X2 radiators are best suited to all combinations: with heat pumps, Max technique. The use of heat combustion of fuel, solar collectors, as an adequate, ensuring the future form of heat transfer already in our time, tuned for maximum energy efficiency. And also they are the best alternative to rehanging the heating system without panel heating.
THERM-X2 technology It is used in all profile, smooth, hygienic and multiphanner radiators Kermi 12, 20, 22, 30 and 33 of the type. And it sets absolutely new scales in the segment of steel panel radiators, since it has a number of unique advantages. With the release of Therm-X2 radiators, Kermi makes a priority for optimizing and energy efficiency of heat transfer process: new technologies reduce the heating time of the radiator to 25%, the radiation intensity increases up to 100%, while energy savings reaches 11%. What is the difference between steel radiators Kermi and why are they energy-saving?
The success of energy-saving radiators Kermi is based on the newest patented principle of therm-x2, which is based on the consecutive flow of the coolant through the radiator panels. If in panel radiators for the previous technology, all panels were heated at the same time, then according to the principles of the therm-x2, the coolant from the feed pipeline first enters the front panel. In the incomplete load mode of the heating system, for example, in the off-season, the front panel power is usually enough to warm out the room, and the rear panel only performs the function of the heat screen. And only when a high power is required, the back panel begins to give heat in full power and, due to its convection properties, contributes to the rapid heating of the room. Thus, due to the greater temperature difference between the supply and return pipe, the energy efficiency of the radiator increases and the losses during the distribution and heat generation are reduced.
As the independent qualified studies have shown, as a result of the energy advantages of heat transfer with the sequential flow of the coolant in steel panel heating radiators Kermi Therm-X2 can be achieved as opposed to other panel radiators not only significant energy efficiency, but the maximum thermal comfort is also created. Our feeling of comfort in the room strongly depends on the intensity of the heat radiator thermal radiation. Even when the thermometer shows the desired temperature, but the radiator does practically do not radiate heat, there is no minimum sensation of comfort, the room is subjectively perceived cold. With Kermi radiators, the situation looks different. In him average temperature The front panel is significantly higher, due to which in normal operation mode, the radiation intensity rises by almost 100%, which at any time guarantees the feeling of maximum comfort.
The entire potential for the energy efficiency of the Kermi heating system with therm-x2 technology can be fully fully in the event that the heat transfer process is involved. In energy-saving radiators Kermi, the high efficiency of thermal energy sources is maintained at all stages of heat transfer. It is worth noting that with the use of the innovative technology Therm-X2, the total energy savings during heat transfer can reach up to 11%! If you think that 75% of all energy consumed in the farm falls on heating, there will be tremendous costs of cost savings.
Compared to traditional panel radiators, the operation of energy-saving radiators Therm-X2 allows annually to save over 6,000 kilowatt-hours in the buildings of the old building. It would be possible to bake 6000 pirogov, 15600 times to shake the electric shaver, 6270 times to wash, 42 years to operate the refrigerator. If all 14.5 million alone and two-quarters were transferred to the technology of Cermi Therm-X2, one could save over 9 billion liters of fuel oil into the year. And CO2 emissions - about 24 million tons each year. This high energy saving potential allows you to become panel radiators by Kermi starting point in the development of new heating systems that meet high demands of tomorrow. For the benefit of man and nature!
Since its appearance, the innovative technology Therm-X2 is of great interest from both specialists and ordinary consumers. The History of Success Flat Panel Radiators Kermi continues and further: the Plus X Award jury noted the entire product line for outstanding characteristics of the Plus X Award 2012 award, and it was noted as "the best product of the year 2012" for functionality, environmental friendliness and quality. Along with impressive results in the energy saving, the judge noted the versatility of the Kermi Therm-X2 family. Either heat pumps, solar collectors Or maximum use of heat combustion of fuel - energy-saving radiators THERM-X2 right choice In each case. Especially if we are talking about the maximum thermal comfort in combination with the best efficiency. Radiators are connected to any heat source and have already saved a significant part of the energy consumed during heat transfer. It makes the therm-x2 very strong component "Kermi Wärmesystems X-Optimiert".
The series of profile radiators of the company KERMI is a heat engineering, the cost of which is justified. High specific thermal power. With quality guarantee. Modern, effectively, compact. Top cover and side screens. Lacquered with a two-layer lacquer coating that does not distinguish between substances harmful to the environment. Fast I. simple assembly. Special packaging that allows you to immediately install the product. Radiators "Kermi" are intended for connecting to any heat source. They can be connected to a single or two-pipe heating system. They are available in compact design or in the form of valve radiators with built-in valve reinforcement and in advance installed at the plant level of heating power.
Universal promising energy-saving technology for any premises and any warmth needs.
Height from 200 mm to 900 mm. Length from 400 mm to 3000 mm. One-, two- or trickered.
Steel panel radiators with side connections (FKO).
With a brilliant coating, upper and side screen. Performed in compliance with the High Quality Standard Kermi. Unique technique. High heat power - ideal for low temperatures. Sensitive and dynamic adjustment due to a slight water content. Suitable for all heat sources: fuel oil, gas or central heat supply, powered by solar energy or an ordinary heating system. This design complies with the requirements of the maximum use of heat combustion.
Radiators PROFIL-V / VM (FTV / FTM) THERM X2 have a built-in valve headset. Along with the unique innovative technology Therm-X2, providing energy saving and thermal comfort, the profile valve Radiator Therm-X2 has all attributes heating equipment future in terms of quality and its constructive features. From high-quality paint and varnish coating of the entire surface to an integrated valve group with factory preset KV values. Lower side or lower central connection. Height from 200 mm to 900 mm. Length from 400 mm to 3000 mm. One-, two- or trickered.
Low kermi panel radiators with a 200 mm high are ideal for the veranda, winter gardens, windowsill and for any other premises, the architectural appearance of which create big windows or low window sills.
Significant reserves of energy savings are laid in the optimal hydraulic balancing of the heating system. Kermi applies new technique for automatic adjustment of valve radiators using KV values \u200b\u200bthat are optimally configured at the factory under certain power parameters heating devices. By changing the KV value, customizable depending on the power of the radiator, is ensured by a good thermostat valve control on the entire setting range. The Kermi Radiator offers optimal connection features from below.
Thanks to the same connection size for all multiplenel types, the choice of the type of radiator can be carried out after laying pipes. With a specific mounting length and height you can also decide later. In addition, the possibility of holding a phased (2-tent) installation, which will save time and money will be saved. Full installation of pipes and system testing can be carried out without radiators. Perhaps a clear separation between the processes of pipe gasket and the final installation of the system. Each radiator now needs to be mounted only once - at the very end of work. This not only minimizes the risks of damage to radiators during construction workBut saves funds for advancement in the construction phase.
Kermi radiators are equipped with a valve insert already at the factory, tuned to their thermal power. With the help of serial installed valve inserts it is possible to install 8 basic provisions (KV) and 7 intermediate adjustment positions. To ensure the same quality adjustment on the entire power spectrum on small radiators, the fine adjustment inserts are installed.
Factory presets of KV values \u200b\u200bare limited to 5 out of 15 possible. Factory KV preds are designed for ordinary heating systems (for example, private houses per or two families) with a pressure drop (Δp) in 100 mbar.
Almost ideal hydraulic linking when used in buildings with an area of \u200b\u200bup to 1000 m² (according to the testimony of the Specialized Institute Aachen, Professor, Doctor-Engineer Rainer Hirschberg.)
KFW Bank recognizes it in its conditions of financing for buildings with an area of \u200b\u200bup to 500m² with a riser with one pump.
Distinctive features and advantages of Kermi's valves
Heating systems in which radiators are equipped with built-in thermostatic valves with factory settings, from a technical point of view regarding the energy estimate relate to hydraulically balanced (for example, according to DIN V 18599).
|
At the heart of the heat radiators Therm X2 It is a new principle, in which the flow of the coolant flow is not organized in parallel, as it was before, and consistently. That is, the front panel is consistently connected to the panels located behind it. The coolant proceeds first through the front panel. For the development of heating technology, this original solution Opens great prospects: the heating process proceeds faster, improves comfort and energy efficiency. |
|
|
|
The principle "X2" is simply geniant. He manifest itself in the fact that heating the radiator is much faster, the heating time of the front panel is significantly reduced. To achieve maximum heat transfer required 25% less time. |
|
|
Higher average temperature of the radiator surface in full load mode provides increase the power of thermal radiation by about 10% (Compared with the surface temperature of standard flat radiators). |
|
|
The Radiator "Therm X2" has a useful coefficient equal to which there is no standard flat radiator. The rear panel is hardly heated in normal mode. Due to the lower heat transfer from the wall, this panel performs the function of the thermal radiation screen. All this leads to reducing energy costs by about 6%. |
Therm X2 models have a higher energy efficiency, compared with the Plux radiators.
Markings of new radiators:
The model range of FKV, PKV radiators, PHV 12, 22, 33 translated into a new classification. Marking new radiators will look like this:
Old Designation - Profil-V FKV 220510
New designation - THERM X2 PROFIL-V FTV 22050100, Article: FTV 22 050 100 1 R 2K
Full Description: Kermi Therm X2 Profil-V Type 22 BH 500x100x1000 mm
1 - white-color designation RAL 9016 (when ordering other colors is simply written by RAL)
R - Standard Connection Right (L - Connection on the left / no-charge / under the order)
