B uderus Logano G234 WS-38 kW Floor standing gas cast iron boiler, atmospheric burner
Logano G234 WS
Temperature flue gas/ connection to the chimney
The required head for all boiler sizes is a minimum of 3 and a maximum of 10 Pa.
For more precise adjustment and maintenance of the draft in the chimney, as well as for the organization of ventilation itself chimney installation and adjustment of an additional air regulator (draft limiter) is recommended. The cross-section of the auxiliary air regulator depends on the effective height and cross section chimney.
Flue gas shut-off valve
If desired, a flue gas shut-off valve can be purchased under additional order... A flue gas shut-off valve installed upstream of the draft interrupter is more effective than a downstream one.
Installations with underfloor heating
In underfloor heating systems using oxygen-permeable plastic pipes (DIN 4726), a heat exchanger must be installed between the boiler and the underfloor heating system.
Preparation hot water
The heating boiler can be operated with any hot water storage tank. Combinations of the boiler with the Logalux ST / SU series tanks have particular advantages.
When installing the boiler, the minimum distances indicated (indicated in brackets) must be observed. For the convenience of installation, service and maintenance, it is necessary to maintain the recommended distances from the walls.
The installation room must be protected from the cold and well ventilated. In addition, care must be taken to ensure that the combustion air is not contaminated with dust or halogenated hydrocarbons. Halogenated hydrocarbons of all types are found, for example, in aerosols, solvents and cleaners, varnishes, paints and adhesives.
Modern, versatile boiler concept
Floor standing gas cast iron heating boilers Buderus Logano G234WS with atmospheric burner 38, 44, 50, 55 kW.
New generation of time-tested boilers with modern EMS Plus automation and industrial design from Buderus.
Floor-standing gas-fired cast iron heating boiler "Buderus Logano G234X (WS)" with a capacity of 60 kW with an atmospheric burner in 2017 appeared in an updated version - with modern automation of the standard EMS Plus and striking industrial design from Buderus. This new generation boiler has retained the basic qualities inherent in its predecessor, such as high performance at low costs, reliability, efficiency, compactness, and also has a power of 60 kW. Works on both natural and liquefied gas. The boiler is intended for heating large buildings, as it can be used to organize economical heating when high power is required. In combination with the high-quality Buderus floor standing water heaters of the Logalux ST and Logalux SU series, it allows a comfortable hot water supply system to be realized.
The pre-mixed atmospheric gas burner, which the boiler is equipped with at the factory, does not have a fan, which ensures quiet operation. V side events there is no need for noise suppression during heating mode. The burner operates in fully automatic mode, ignition is electric and does not require additional gas consumption.
The low-temperature heating boiler "Logano G234X (WS)" is equipped with an efficient 7-section heat exchanger made of high quality gray cast iron GL 180 M... The sections are ideally matched to the design of the boiler block and have special ribbing, which results in intense heat transfer from the heating surfaces. The boiler is equipped with 80 mm thermal insulation, which, together with the cladding, prevents energy losses.
The new boiler model "Logano G234X (WS)" is specially designed for installation modern system control "Buderus Logamatic MC110" standard EMS Plus... This automation is equipped with either the “RC 310” or “BC 30 E” controller with a touch screen and full text menu. Such a system allows you to work in a weather-dependent mode, controls the boiler and the boiler. indirect heating, recirculation line, 3-way valve, and also informs about the current state, selected functions, errors. The control is carried out by a signal of 0-10 V. The setting of all options is intuitive and very simple - according to the principle of "Push and turn". All control functions are coordinated with the system hydraulics. The control system can be expanded with additional modules: mixing modules, Internet connection module, cascade module with the ability to control up to 4 boilers, modules for solar systems... For complex systems, it is recommended to use the professional automation of the new generation "Logamatic 5000". The control system is not included in the boiler delivery and must be ordered separately.
The Logano G234X (WS) boiler is delivered completely assembled, with casing and a gas burner, which significantly saves time and costs for installation and quick start-up. The quick installation of the heating circuit for connection to the boiler or for fixing to the wall is adapted to the respective hydraulic circuit. The DHW tank is conveniently connected to the boiler using a connecting pipe with a loading pump and a non-return valve. The burner design has no moving parts, and its readjustment to other types of gas is as simple as possible. Since the combustion process is virtually soot-free, maintenance and cleaning work is kept to a minimum. This boiler is preset for natural gas. For conversion to LPG a special conversion kit is used (additional equipment).
Main features and advantages of the "Logano G234X (WS)" boiler:
Description
Buderus Logano G234-44 WS - floor-standing gas boiler equipped with an atmospheric burner and designed for indoor use for various purposes... Using natural gas of group H or LPG of groups P / B / P as fuel, this unit easily copes with tasks of heating or hot water supply in country houses, warehouse and production premises area up to 440 sq / m with high efficiency - up to 93%.
Buderus floor standing gas boilers of the latest generation are distinguished by their excellent thoughtful design and excellent ergonomics, successfully fitting into any interior without sacrificing precious space. Simple installation, cost-effective ownership, no labor-intensive maintenance required - these are the main advantages of this equipment.
All sections of the Buderus Logano G234-44 WS heating boiler are made of high quality cast iron, resistant to corrosion and high temperatures... They are perfectly matched to each other, which guarantees reliable and long-term operation. For hot water supply, the boiler can be combined with several different configurations of water heaters from the Logalux L or Logalux SU series.
The gas boiler Buderus Logano G234-44 WS is delivered fully assembled and ready for operation. Distinctive feature gas burner is the ease of commissioning - it is adjusted at the production stage and has no moving parts in its design, so the installation of the boiler will take a minimum of time.
The installation of the unit can be carried out in a technical or other specially designed room. At the same time, it must be protected from freezing and well ventilated. It is also possible to install the boiler in the domestic area, but in this case, the presence of a flue gas control system is mandatory.
Fast connection and commissioning is also facilitated by the fact that the heating circuit is fully adapted to the hydraulic circuit. It does not take much effort to connect the storage tank - it is carried out through the connecting pipe.
Our company is ready to perform professional installation of heating equipment of any complexity - if necessary, the Buderus Logano G234-44 WS boiler can be installed in your house by our specialists in an extremely short time and on favorable terms.
1 - burner; 2 - sheathing; 3 - boiler block; 4 - control system; 5 - front wall.
# Comfortable use... Design atmospheric burner designed in such a way as to guarantee stable operation on natural gas with pressures up to 10 Mb. When it is turned on, premixing takes place without the participation of a fan; in heating mode, no additional steps are taken to reduce noise. The ignition and gas supply systems are controlled through an automatic electronic control system.
# Convenient management. The functionality of the boiler can be flexibly adjusted, depending on specific tasks, without requiring tedious manipulations. Control is carried out by simply pressing the buttons or turning the knob. If necessary, the boiler equipment can be expanded and supplemented with various options and automation.
# Cost-effectiveness. To reduce the cost of ownership, the boiler is designed with a double-pass chimney and a special profile heat exchanger - together they save up to 5% of energy resources. Use of room temperature sensors, as well as sensors outside temperature allows you to save an additional 7% of energy. To work in winter time for dense gas with low pressure, a specialized pressure switch must be used.
# Reliability. The absence of an electric fan in the burner not only makes the boiler less noisy, but also reduces energy consumption and extends its service life. The gas is burned in separate torches, and the flame does not come into contact with the burner tube, therefore, there is no heating.
# High build quality. Production is carried out in Germany using original developments and best materials... At all stages of the creation of finished products, strict quality control is carried out, which ensures high level quality Buderus Logano G234-44 WS. The level of emission of harmful substances is extremely low and meets modern European standards. The boiler manufacturer's warranty is 2 years.
To know Additional information about this equipment and you can order the Buderus Logano G234-44 WS floor-standing gas boiler on our website or from the sales department.