The conductor for drilling holes does not become a reliable solution, but will be financially favorable. If there is an opportunity, then it is better to bring it in special stores Tools for the manufacture of furniture.
According to the statistics of furniture manufacturers, most time takes markup, blank and hardening. For this reason, the conductor for assembling furniture becomes a very important element.
In order not to resort to manual measurements and sketch, a special device was invented - a conductor for drilling holes. Its use allows the drill at an angle of 90 degrees to furniture, which eliminates deviations from the required direction. When deep holes are done, the result of the use of this device becomes particularly noticeable.
The conductor for drilling holes in high quality chipboard should have the following qualities:
The material for the conductor for drilling holes is different. Among the tools made of plastic or organic glass, the steel option is highlighted.
It has such advantages as:
Very biggest popularity of home masters enjoys a conductor for assembling furniture with their own hands. For its manufacture at home, a small amount of tools will be required.
Fix this adaptation Specialists are recommended using a wanking. In the manufacture wooden furniture It is allowed to use only these elements with glue. In any case, the homemade conductor for drilling holes is very useful in practice and without it will be hard to hold assembly work.
The process of drilling holes for the conformat and the specks looks quite laborious. The reliability and appearance of the manufactured furniture made will depend on the quality of its implementation.
The furniture conductor for drilling holes will help to improve the quality of the holes performed. Without their use of errors with manual marking, not avoid.
There are many different conduitors from various manufacturers. Among them there are also such specialized options as a conductor for drilling holes at an angle. No less an interesting option A conductor can be a conductor for drilling end holes.
All this variety allows you to simplify many complex operations that may occur in the manufacture of furniture. With their use of marking and drilling holes of any complexity on the doors, on the tile, when assembling furniture can be a very simple task.
However, the tools of such a level have a sufficiently high cost, which becomes the reason for the appearance of a popular question: "How to make a conductor for drilling holes?". Make it is easy and for almost everyone.
In principle, the conductor for the holes can be made of girlfriend. First, it is necessary to carry out the calculation of the folding conductor for drilling holes with their own hands. The next step will be the work on the drawing. Help solve such a task can furniture template for drilling holes. You can find this on the Internet or from repair professionals.
A detailed description of all stages of manufacturing furniture conductors can be found on special video on the Internet. But still an important point It remains to make the correct drawing of the conductor for assembling furniture. In each case, it can be different and need to take into account all the features.
Conductor drawings for drilling holes with their own hands may not have the required accuracy. For this reason, there is a need for additional checking in the manufacturer. It is also important to be extremely accurate and neat, otherwise the manufactured tool will not bring any benefit and can only aggravate the furniture production process.
A variety is very large, so you can hear the next question of novice furniture makers: "How to make a conductor for drilling holes of pockets with your own hands." One of the secrets in the manufacture can be the use of metal sleeves. This approach will prolong the life of the conductor and make it a more reliable tool.
Sometimes at home you need to make holes in wood blanks, metal, chipboard or other material.
The housing of the device provides sleeves that are adjusted by the axis of rotation in horizontal, vertical and inclined planes. These models of the conductors are designed to drill cylindrical products.
The name speaks for itself, the conductor is not attached, it is simply imposed where it is necessary to make a hole.
Capable holes in several planes.
They do not have rotary elements, can move the part and process the same type of blanks.
These conduitors have such a function as deadlab. Which allows you to quickly and conveniently with small businesses will switch to the production of a new product.
Let's start with the concept of the conductor - This is the so-called template, the use of which allows you to carry out comfortable and ultra-precise drilling.
Moreover, drilling can be both perpendicular to the surface and at any angle. If you use a conductor, then you do not need special qualifications, make complex calculations, make markup, where there will be holes, which saves a lot of time.
As we see, thanks to the versatility and simplicity of their design, the conduits received wide use In different fields of activity.
In the engineering industry, used for drilling holes in different blanksmade of common materials. Apply conductors that repeat the drawing with the exact observance of all sizes. Also use when the drilling of the mixed type holes is required.
The most important distribution of the conductors received in furniture manufacturing. Furniture conductors Apply to the installation of fittings, assembling furniture and many other technological processes.
At the same time, the furniture assembly is accurate, accurate and fast. A large number of furniture contains the waders that should be installed very precisely and here without the conductor nowhere.
The most common conductor for the dowel - doweling. Used mainly overhead conductors made from lightweight materials.
Another sphere in which conductors are widely used to drill holes is a construction. With their help produce drilling of technological holes in building structures, eg, .
Conductor can be bought or done independently.
But before choosing a model, it is necessary to determine for which tasks, it will be used and on the basis of all this data you should select the type and design of the tool.
So why use the conductor to drill holes:
The conductor for drilling holes is an integral part of not only production, but so will also be useful in home.
As a variety of conductors a lot, so we will consider original design and analogue, respectively. So, let's begin.
Its main purpose Obtaining holes in thick blanks, at an angle of 90. In fact, it is a set of bushings of the combined in one case. This is usually an overhead conductor, which are widely used when assembling furniture.
It is worth attaching a device to the surface and you can start immediately to drilling, without a cumbers. There is one minus, the device should be kept tight, and especially at the beginning of work. Because from vibration, the device can shift.
This type of conductors can be made with their own hands.
The homemade conductor can be used, but for more convenient use, the stop should be constructed, for this purpose, a metal width is 23-25 \u200b\u200bmm. and a thickness of 1 mm., after which the sheet bends at an angle of 90 and attached to the conductor. Also in the base of the conductor, you can insert bushings of different diameters.
Everyone knows that it is problematic to make a hole in a sloping surface, the end of the drill is constantly jumping. This type of conductors is fixed in the specified position and allows you to work with high accuracy.
This type of conductors can be done quickly and independently.
That's all the conductor is ready to work. In order for the holes less less than, they can be reinforced with metal sleeves, which are performed from round tubes of different diameters.
This type of drilling is small.
It should be noted here that in products made of metal, this kind of holes are made only by the cutter. As for wooden products, then exist ready solutions in the form of sets.
You simply apply these conductors, press the blank tightly to the base, set the specified height and ultimately get smooth and beautiful oblique holes at an angle. Yes, if we need not through a hole, you are unforgettable on the drill itself to wear a ring-focus.
On their own this species Devices made difficult and problematic. There is enough simple ways and options, but they do not differ accuracy. For example, a drill is put on the prepared inclined surface and drill under the resulting angle our billet, as we understand the accuracy suffers very much.
Their main purpose of observing the monastery of the holes, subsequent to which the sewage will be installed. That is, when you apply, the conductor to both sides of the product, you get the perfect joint.
As you understand, this type of conductors can be made independently. If you have a stream of blanks with the same geometry, you will be conveniently used to use the invoice pattern. It is desirable to use organic or other transparent material (plastic) as a template.
We apply markup and drill holes. It is desirable to score a brass or copper tube holes so that the drill does not break the calibration hole.
When you use the blanks of various shapes and sizes, you will need a universal device. The most interesting thing is that this adaptation can be made of sweater materials.
Any universal conductor for drilling holes is made to save time and money. And you will make it with your own hands or buy in the store already ready to solve only you.
Today, the construction uses devices that facilitate the processing of materials. For example, a conductor for drilling holes is one of those devices that allow you to work without the use of any means of marking.
The presented device allows you to make work as accurately as possible. It is a special box that provides the necessary parameters of the holes. That is, you can easily configure the angle of the drill input into the material being processed. At the same time, if there are several parts, then drilled holes will coincide.
I must say that such devices can be purchased at any construction store. Their value ranges from 1000-2500 rubles. However, the conductor for drilling holes can be made independently. This is especially necessary if special parameters are required for work.
Conductor for drilling holes has such advantages:
An acceptable cost and the possibility of self-made manufacturer.
There is no need to use a ruler, pencil or other means for marking the treated surface.
Reducing the complexity of the procedure.
Very simple to use the product, intuitive even amator.
As you can see, the conductor for drilling holes is a very useful device for household Or for a small business.
In principle, such an apparatus can be used almost everywhere. For example, it can most often be found in the process of manufacturing furniture. This work requires accurate parameters. The use of the measuring instruments takes a large amount of time. It entails additional spending that can be destructive for small business.
A very important device conductor is in mechanical engineering. Here the device is already playing a huge role. It should be as accurate as possible. As you can see the presented device is quite common and useful. It allows you to significantly simplify work.
Conductor for drilling holes, the drawing of which you can see in the article may have different design. It all depends on how the purpose will be applied. For example, if you purchased a device in the form of a small strip or angle with holes drilled on one line, then with it, you can make holes in one row at right angles.
If you do not need such a design, and a more complex option is needed with holes that are not on the same axis, then you will have to make the device yourself. How to do it, you can learn more. However, to begin with, it is necessary to deal with the varieties of the products presented. As you can see, the conductor for perpendicular drilling holes has a not too complex structure with which even an inexperienced master can figure out.
So, these types of fixtures can be distinguished:
Stationary. They differ in that they do not have rotary elements capable of moving the processed part. That is, those products that are drilled are the same type.
Overhead. Their feature is the simplicity of design and low cost. To work such an apparatus you just need to wear on that part that will be processed. It should be attached with the help of washers and nuts.
Tipped. They are able to drill a few holes in one detail. At the same time, they can have a different angle in relation to each other.
Swivel. In this case, the location of the conductor sleeve is determined by the divisory disk.
Rocky. Such products are most often installed on professional drilling machines. They enjoy special demand in the engineering industry.
In order for the conductor to drill holes, the photos of which are presented in this article, could successfully cope with the tasks set in front of it, you need to purchase the correct device. While choosing and shopping, try to guide such recommendations:
1. Type and purpose of the device. This parameter is the most important. If you select the wrong device or its snap, then it will be useless for you, and the money will be thrown into the wind.
2. The cost of the device. This parameter is also important. You should not give preference to the cheapest products that can be dispersed at the first use. Buy durable metal devices.
3. Manufacturer's warranty. Do not get the thing in basement. There you are not insured against fakes or defective goods. It is better to contact the official certified point of sale, where you can change the goods under warranty if it does not suit you or turn out to be not functional.
4. Additional features. To date, the conductor for drilling holes of pockets can be equipped with special devices that help eliminate dust during operation, or other devices.
5. Manufacturer. Here it all depends on your taste and reputation of the manufacturer. Now the most popular is the conductor for drilling the Wolfcraft holes.
It's not difficult to do it. First you need to pick up required Material. For this purpose, a channel or corner is best suited. Naturally, before processing the workpiece, it is necessary to make a template for which the holes will be drilled. The scheme can be drawn on the usual sheet of paper.
Next, it is necessary to make marking on the billet. After that it must be clamped in vice or with the help of clamps, and only then start drilling. Note that it is strictly perpendicular to do it enough. The fact is that manually you can make a hole with a certain deviation. And the thicker you select the workpiece, the more difficult it will work with it.
Next you just need to drill holes at the placed places. In this case, take into account the diameter of the drill. It should accurately correspond to the size of future holes on the material being processed. It is best for this purpose to apply a boring machine. It is he who will allow to achieve the desired angle of 90 degrees. If a drilling machine No, the drill must be fixed so that it does not deviate. To do this, you can apply all sorts of stands.
Conductor for drilling KWB holes, as well as any other device of the presented type, must be applied correctly. Only in this case can you achieve a positive result. So try to comply with such conditions:
During operation, all the details, as well as the device itself must be maximally cleaned of dust or other contaminants.
Try to choose exactly the drill that will approach the diameter.
Please note that during the installation of the conductor, it should flat down to the plane of the table. Naturally, at this stage, you should also set the depth of drilling.
During the selection of the rotational speed of the drill, it is necessary to check the installation of the drill control.
The processed item should be very firmly fixed on the conductor.
Through the guide sleeve, the drill must be brought to the product and start drilling.
Note that during operation, you should not press the tool too much. Otherwise, the drill may simply break or lose its sharpness.
After completion, it is necessary to gently display the tool from the part and unscrew the conductor.
During the implementation of all manipulations, try to comply with the safety rules. For example, put on protective clothing, gloves and glasses. If you feel that the tool started to run, immediately stop the work. Otherwise, you risk getting injury.
That's all the features of the application of the conductor. Good luck!
The conductor for drilling holes substantially facilitates the work of furniture makers and other specialists who, by the nature of the activity, is brought to make accurate holes in the tree, chipboard, MDF, metal and other materials.
What conductors are and is it possible to make this device with your own hands - the main questions are devoted to the article.
Conductors are simple devices, a kind of patterns that have long been successfully used in mechanical engineering.
They allow you to perform a hole in the right place and under a strictly defined angle. The scope of applying conductors is very wide, from drilling machines to diamond drilling installations.
Today, each furniture master has a set of these tools in his arsenal, allowing to collect furniture housings, install accessories and perform other operations.
Conductors are required in construction (for example, to make holes in the wall of the building) and various industries.
As a rule, only overhead models are used here, which are made from lightweight materials to facilitate the work of the wizard.
Furniture conductor can be factory origin or made by hand.
Many masters are so similar to the eyes and accurately hand, which is not any difficult to drill holes under the desired angle without additional devices. However, this requires tremendous experience and, perhaps, talent.
With the help of a tool to which this article is devoted, even a novice furniture master will be able to make accurate holes for the seasons and collect cabinet furniture without complex preliminary calculations and marking. This reduces the complexity and, consequently, the cost of the work and speeds up the process.
Before you buy or make a conductor, you need to decide on varieties and appointment.
The overhead conductors are named so due to the fact that they are superimposed on the workpiece with which the work is to be. They are either fixed on the details, or just stick with their hands.
With the help of overhead tools, for example, holes in MDF plates.
Rotary conductors are needed if you need holes on the surface of the cylinder. Inclined, vertical and horizontal axes of rotation allow drilling holes at a different angle.
Unified conductors are especially in demand in small serial production, where it is necessary to drill a lot of holes in the same type of details of various sizes.
This is possible thanks to the ability to remap the tool for a different part size.
The scope of applying tipped conduits is the need to make holes in several planes.
The sliding conductor does not need to be fixed on the surface of the machine - it is adjusted to a specific surface in which it is necessary to drill a hole.
With the fixed models, it is more convenient to work, but the sliding will provide the master with a certain freedom of action when working on a boring one-spindle machine, especially if several holes are needed on one surface.
Conductor for drilling holes is included in the list required tools for assembling furniture. One of the difficulties in performing any holes - the drill can enter the drilled material not under the angle.
To correct the situation, it may take a lot of strength and time, in addition, not all errors can be corrected.
The conductor serves not only by the template, thanks to which the master understands where to drill, but also directs the drill, does not allow him to deviate from the specified direction.
First of all, the tool is necessary to specialists who produce furniture, but also when assembling are not so rare when the finished furniture kit does not have the necessary holes, for example, under the sewage.
The conductor is indispensable for drilling thin plates, for example, a chipboard, to perform holes at an angle and many other operations.
Accurate, simple, fast furniture assembly always occurs with the participation of this tool. With it, you can make a hole on any removal from the edge of the part, and independently of its width.
One of the operations at which you can not do without a conductor - installation of the wanks.
By and large, the semits are the last century, in modern furniture production, other types of fasteners are already used to connect different parts of the cabinet furniture. However, the connection with the help of the waders is still quite widely used.
The main difficulty in mounting them is precisely exactly the accuracy of the holes, and the strictly perpendicular direction so that the parts can be connected at an angle of 90 °.
If even one hole is not in its place or not under the angle - this will lead to errors that are quite difficult to correct. A special tool is called conductor for drilling under doweling jig.
Furniture is common, but not the only scope of application tools for drilling. The second important direction is the drilling of pipes and other cylindrical blanks. Conductors allow you to drill even a small diameter pipe.
If you collect different kinds templates for drilling on one workbench, it turns out that they are very different appearance and sizes.
Some easier to buy factory production, especially if you make tools are not your hobby, others can be made without any particular difficulties.
Multifunctional conductors from well-known manufacturers of silence - collect them on their own, you can save well.
The simplest tools are inexpensive, so many masters are easier to buy them. However, there are enthusiasts for which the manufacture of the instrument is of some interest.
In addition, you can make a truly durable tool with your own hands, which faithfully will serve for many years.
Another reason to make a tool yourself - if you need a template for non-standard holes.
On the Internet there are a large number of drawings and video instructions for making conductors for drilling with your own hands.
To do this requires a set of tools:
Another argument "For" An independent manufacture of conductors - each wizard will certainly have the necessary blanks for their manufacture: wooden bars, pieces of fittings, metal plates.
The conductor-template for accurate markings and drilling on it holes is so simple that it's even a novice master.
Take the reinforcement with a square section of 10 x 10 mm (or large) - the required length must be cut off with a hacksaw for metal or a grinder.
Sections are desirable to prepare with a file and emery paper. This is the basis of the future conductor.
Now you need to mark the holes. One of them should be at a distance of 8 mm from the edge of the conductor - at this distance there is a central part of the chipboard board.
Furniture standards dictate a step between holes - it is 32 mm. On this markup, it is necessary to drill holes with a diameter of 5 mm.
The conductor is almost ready for use, but if you equip it with focus, then collecting furniture will be much more convenient.
It is made from a metal plate with a thickness of 1 mm and a width of 25 mm. The workpiece must be bent at right angles and secure in stubcin along with an already finished part made from the reinforcement.
Now you need to make holes for the thread and make two parts between themselves bolts.
Furniture conductor can be equipped with half plastic bottleso that drilling holes was not so dusty. From the same plastic bottle, you can build a small pallet for collecting chips.
This is the easiest conductor for drilling holes, thanks to which the assembly of cabinet furniture will become more easier.
You can not worry with him that the drill can enter the chipboard of the chipboard or drove it through.
If you make furniture with your own hands, you know that all products must be joined. In this regard, the need arises to drill a lot of holes. For this, all the masters use a special tool. It will be about the conductor for drilling holes.
The conductor is a plate on which holes and sleeves are located. Even the newcomer may take advantage of such equipment. Enough to do just a few steps:
To bore two parts, you will need only one conductor.
Such an adaptation is used not only in the manufacture of furniture and construction, but also in mechanical engineering. With it, the drilling hole of the holes on any surfaces is performed. Celebrate a few more advantages:
All models regardless of their use in one way or another are divided into several basic groups. Consider them in more detail:
Use a drilling conductor in many areas of activity. Most often in construction. But in addition, there are still some important industries.
During the assembly, many masters face such a problem as a shortage of holes. In this case, you have to make new ones. To make it easily it is recommended to apply the conductor. With it, all the work will be done quickly, efficiently and accurately. Also, to resort to the help of such a fixture you need masters that do not have a special machine.
Modern assembly is distinguished by a wide selection of furniture fittings and various fasteners. All this requires an accurate installation without offplaces. It is in this that the conductor will help.
Make holes proper form On cylindrical surfaces is quite difficult. Apply the drill in this case is useless. It will constantly slip, which means they will all get an irregular shape. To do this, it is recommended to use the conductor.
Additionally, you can use devices that help to make perpendicular holes. It also helps to process rounded elements and edges.
When assembling furniture, the use of such a device must. Someone prefers to buy ready option In the store, and many make them independently.
As for sale, they can be found in almost every construction store. However, it may turn out that the purchased equipment may not come up under your requests.
The cost of products affect the following factors:
Simple equipment has a low cost, but the products with additional functions will cost more expensive.
Having a little view of the conductor and some tools can be made it with your own hands.
For work it is necessary to prepare the following materials and tools:
It is necessary to familiarize yourself with several drilling techniques.
For independent manufacture Furniture are often used confirmates. For such drilling, special drills with a size of 4.5 mm are used. It is easy to learn at an extra head.
This is the most difficult technique. The drill must settle down perpendicular to the end. In this case, the drill must be kept firmly and smooth. It is very convenient to use special equipment.
This is the most accurate and fast way. For this method, it is necessary to prepare special clamps (clamps). Fixing should be high quality so that the details are not watched.
To do this, use the drill size of about 8 mm. In order for the details to be through holes, it is necessary to install a special depth limiter. For the end, it is recommended to use the drill too, and the depth should not exceed 20 mm.
From the roller you will learn how to properly use the conductor to drill holes in LDSP.
