Any attempt to spend off without filtering material puts at risk performance Your, possibly acquired for the big money of the device.
In case of impossibility of acquiring no disposable bags, nor reusable, you can at your own risk try Filter to build yourself.
Vacuum cleaner became For many housewives, an indispensable assistant. An important condition for high-quality cleaning is. It is there that all dirt, dust, small garbage particles are gathering. The filter is also responsible for the purity of the air that comes out of the vacuum cleaner, leaving all the contaminated pollution in it.
The better the filtering from your vacuum cleaner, the more dirt settles on the filter walls.
On a note! You can use not only purchased consumables for the vacuum cleaner, but also make them yourself.
So you will not only save money, but you will be sure that it is reliable and effective. Recall what types of filters exist:
The first type of filters created From very tight fabric. It is easy to make enough.
Important! know Suitable for your model of the bag, buy in the construction store the material of a suitable density and sew a bag according to the original dust collector developed by the manufacturer.
To increase the density fabric membrane can be folded in two and more layers. The base for fastening can be cut from thick cardboard or plastic. Fasten the bag to the base in several ways.
In the first we will need glue. With it, we simply fix the neck of the bag between two pieces of cardboard.
In the second case we take Conventional velcro. The first half of the velcro should be glued to a plastic or cardboard base, and the second to sew to the neck of the bag. Your dust collector is ready to use.
Popularitythe aquiltra is not only that with its help, cleaning becomes more efficient, but also in humidification. The entire absorbance trash passes through water tank.
Such a filter created to hold Even fine dust and pollen. This feature of the vacuum cleaner is valued by people who have allergies to dust.
Attention! Due to the water separation located in the case, the vacuum cleaner becomes heavy.
Choosing such a type of home assistant, try whether you can easily move with him around the house.
You can make this type of filter alone. What can I do:
We take a baking powder, a casing and a drive to install all these details on the dust collector of the vacuum cleaner.
As an attachment, you will serve fasteners covered with zinc.
Do not forget to put polyethylene on the bottom of the filter. It will perform noise insulation functions.
The latter install the pump. You can secure it using a rubber ring.
Important! While using the filter, follow the water level.
This variety of vacuum cleaners is popular. Already more than thirty years. The hull itself is easier than that of vacuum cleaners with aqua filter, since it is empty inside. Essencesuch filtration concludesin the impact of centrifugal force on the absorbance inside the garbage. Hurricane wind stream Large and small particles of pollution are settled in different containers. After disconnection Power supply vacuum cleaner you have enoughcapture a container from the body and clean it.
For this homemade filter we will need:
Cut from the cone the bottom and connect it with the pipe. To make a hermetic hole, all holes and cracks close with plywood. Sliced \u200b\u200bpart of the cone connect with a pipe into which all the garbage will fall. The end is the pipes must enter the plastic container. Sealing a piece of plywood. You need to connect with the vacuum cleaner using the output tube. We are attached to the inlet of the vacuum cleaner using the hose.
Cyclone filter with your own hands
How to make an aqua filter
Today, the market household appliances Filled modern models Vacuum cleaners equipped with various filters. Their main purpose is high-quality air filtration by holding the slightest dust particles. However, the high cost supplies, as well as the desire to modify your vacuum cleaner, often lead to the emergence of the issue of consumers: how to make a filter for a vacuum cleaner with your own hands at home. There are many different ways Production of filter elements, the main advantage of which is their availability. After all necessary materials And the tools usually can be found at home or buy in any building store at low prices.
When creating filters are used various materialswhich is easy to purchase at any store with economic goods. The distributed option is foam rubber. But you can also use any dense nonwoven canvas. The main thing is that it is worth paying attention is the density of the composition. The material should easily pass the water and at the same time hold the smallest dust.
When the filtering element is contaminated, in order to avoid spending on the purchase of a new one, it can be replaced independently. For this, a piece of new foam rubber required thickness will be required, or you can also use a sponge for washing dishes. At the same time, in the case of the purchase of a material, you can buy a foam rubber of different density (a layer with a higher density will go first to the filter input). With the help of scissors cuts out right size And the same scissors are customized thickness, after which the new filter is installed in the vacuum cleaner.
The process of independent creation of the air filter involves the use of other materials. Folon can be replaced with tissues with the same density.
The principle of manufacture is the same as in the case of the use of foam rubber: with the help of a scissor or a stationery knife from the material, the filter is cut into the required size.
Water filters (or aquilifers) belong to efficient ways Cleaning. Along with high dust removal rates, such a system also allows you to moisten the air.
The aqua filter works on the following principle: the air together with dust particles enters the water capacity where, under the action of gravity, all the suspension settles on the bottom of the filter, and the purified and wet air moves the stream further on the device and comes out. The device has disadvantages:
For the manufacture of aqua filter, only drill, self-tapping screws and dyeing will be required. As the main materials will perform:
Assembly process new system Filtration consists of several steps:
Many vacuum cleaners brand "Samsung" Equipped with outlet filters of nera, which are known for their trapping indicators even microscopic dust particles and high-quality air purification. However, the filter elements of this category have a significant drawback - the need for their frequent shift, as well as a fairly high price. That is why, often manufactured independently.
For the design of a new non-filter, you only need a stationery knife from the tools. The list of materials will enter the cabin filter for machines with the same height of "harmonic" as the original filter in the vacuum cleaner. Also during the work will be used sealant and acetone for degreasing. Production of the cleaning system provides several stages:
Filters of this type are used in many professional vacuum cleaner models in which there are no bags for garbage collection. The main purpose of the membrane is the additional cleaning of the air flow before it enters the non-filter (on the last section of filtration). Additionally, the membrane is the protection of the entire device, without giving particles of dust to penetrate the system and score other filters.
In order to independently make a membrane filter, it will take a segment of a dense material, which can always be purchased in a construction store. At the same time, it is necessary to remove the dimensions in advance from the original dust collector, which requires replacement.
It is possible to increase the tissue density by folding the web into several layers. You can use thick cardboard or plastic as the basis for the membrane bag. Filter to base can be fixed by one of the presented methods:
The device of cyclone filters makes them much more convenient and more efficiently as familiar garbagers. Due to its capacity and hygienicness, such cleansing systems are becoming increasingly popular. However, the high cost does not all fall on the pocket.
The principle of operation is as follows: the air flow passes through the primary filters that delay small dust particles. Further, the air enters the cyclone filter - the container in which, under the influence of the effect of the vortex, larger garbage particles are tightened and under their weight settle on the bottom. At the outlet, the air is purified by 98%.
Most simple way manufacturing cyclone filter is the use of a plastic bucket in the role of the main element. The volume is calculated simply enough. For every 100 W power, 1 liter of tanks are added.
Opinion expert
Nikolai Petrovich
Subpinerate for expert
Ask a question expertThe presence of a hermetically adjacent lid is a mandatory requirement for the container.
In order to construct the "cyclone" system filter, the following tools will be required:
Materials will be needed:
The manufacturing process is carried out as follows:
Water filtration systems are perhaps the very biggest among users. However, the price of a vacuum cleaner equipped with a similar method of purification is often too high. Therefore, there are many options for homemade aqua filters. Below is another example.
For homemade design, Aqua Filtre will be required:
On one side of the bucket, two holes are cut, the diameter of which is equal to the diameters of the nozzles. The walls of the holes are lubricated with silicone. One of them is inserted with a knee and another pipe attached to it in such a way that its end is located directly near the bottom of the tank (the clearance of not more than 2 cm) is part of the part of the air inlet for the air flow. An additional cover with a hole for a nozzle and a split-out for air output is pre-cut from PVC.
In the second hole, located over the membrane, another pipe is set to which the hose for a vacuum cleaner will be connected. Before work, about 2-2.5 liters of water flooded in the container.
Homemade filtration systems have a large number of undoubted advantages, namely:
Starting K. independent manufacture Filters, you need to consider some nuances:
Would you make a filter for a vacuum cleaner with your own hands?
YesNot
Thanks to a large number different optionsThe manufacture of filters with your own hands is available for each user. Such an approach not only allows you to significantly save money and time to buy new elements, but also significantly increases the quality of air purification performance even on those vacuum cleaner models on which conventional air filters are provided.
What is a water filter for what is needed
With the help of a water filter built into the vacuum cleaner, you will be able to effectively produce wet cleaning in the room, get rid of bacteria, pathogenic organisms, dust ticks, animal wool, fill the air with cleanliness, freshness and moisten it.
The principle of operation of the aqua filter of a vacuum cleaner
By and large, Aqua Filter is a device in which there is a reservoir filled with water. The separator is available in the device, which works on the cyclone type, leads in motion a container with water. The vacuum cleaner sucks the air with dust particles, sera and dirt, then it all passes through the water in which all pollution is settled. After that, the air passes through the filters, where it is finally cleaned and moistened. As a result, clean and fresh air is returned to the room.
After each use of a vacuum cleaner with an aqua filter, you need to wash the container and thoroughly dry all the available filters in order to avoid breeding bacteria.
Types of water filters
Aqua filters are two types:
The work of the separathfiltra
How to choose a vacuum cleaner with aqua filter
Water filter do it yourself
The negative side of the vacuum cleaner with aquilter is its high cost. That is why many craftsmen master their aquilfilter for the already existing vacuum cleaner. In addition, it is possible to save money to significantly, making it from the girlfriend.
Option number 1.
If you need to make a water filter for a cheap vacuum cleaner, you can at the same time to increase the power of the device. How to do it? On the incoming filter you need to replace the paper element on the foam. As a result, the device will suck the garbage with more power. Budget models of vacuum cleaners at the exit have a filter from a dense material, which is due to the power of the device. It is necessary to pick up the medium density material for the filter so that the power of the device does not reduce due to it, but at the same time small dust particles were delayed.
Before proceeding with the water filter assembly, you need to prepare everything required tools and materials. We need:
So let's get up! First you need to cut a circle in the bottom of the pan, the diameter of which should be 3 cm less than the diameter of the pan. With the help of self-tapping screws, fasten the saucepan to the vacuum cleaner at the air outlet site, the holes in it is pre-drilled.
Plastic bottle set in a saucepan. In the bottle you need to do holes to exit clean, filtered air and pour 1-1.5 liters of water into it. Polluted air will pass through the water where the particles of garbage and dust will be seen.
A homemade device with a metal adapter and screws and kpripim to the exhaust of the vacuum cleaner. The flexible hose is attached to the adapter, on the other end it makes a slot, thanks to which the whirlpool will occur inside the bottle. Ready!
Option 2.
Consider how to make aquilter separath type. We need:
On the dust collector you need to install the casing. Next, the pump with the rubber ring. To reduce the noise issued by the vacuum cleaner during operation, you need to glue it to its bottom polyethylene.
Today, a wide variety of types of vacuum cleaners are presented, which help to make careful cleaning, besides, they are equipped with many useful features.
Vacuum cleaners with AquaFlter are currently presented in a large assortment, so it will not be any work to find in household appliances stores.
But, as a rule, such modern vacuum cleaners are quite expensive, so you can significantly save your financial resources and make homemade vacuum cleaners with aqua filter.
Immediately, we note that the washing vacuum cleaners and vacuum cleaners with aqua filter are very often confused, and they are completely different vacuum cleaners, but even the sellers themselves do not know about it.
Vacuum cleaners with aqua filters today are very in demand. They are able to carefully clean the floor and even air.
During the use of a vacuum cleaner with an aqua filter, it is not necessary to open windows to ventilating, since the air and so remains clean.
Very often, the vacuum cleaner with aqua filter can form a foam, with this problem it fights perfectly.
Before purchasing vacuum cleaners with Aqua Filter, you need to carefully read it with its features and advantages that distinguish it from a simple vacuum cleaner.
The vacuum cleaner with aqua filter has a lot of preferential features, namely:
- reliability;
- durability;
- multifunctionality;
- the ability to clean and moisturize air;
- High power;
- does not require expensive maintenance;
- long juice operation;
- Does not cause unpleasant odor in progress;
- Convenient use.
Disadvantages:
- Weight parameters and high weight.
Often, vacuum cleaners weighing about 10 kilograms are found, so there is a considerable effort to transport it;
- high price;
- loud noise.
Aqua Filter - This is a special container with water content.
With the help of the motor, the air passes through the liquid, so not only air is cleared well, but also eliminate all contaminated particles.
Before making a vacuum cleaner with an aqua filter, you need to choose the water container and separator.
Take care of the built-in turbid, which will help carefully clean carpets.
In addition, pick up the fan and the pump.
The fan must be selected taking into account the noise level, it must be minimal. When choosing a pump, you need to pay attention to its height.
There is such a vacuum cleaner according to preliminary drawings. Fastening details better pick up with zinc coating.
To collect the vacuum cleaner, you need to build stages. First of all, it is necessary to neatly install a dust collector, a drive and a casing.
To make a vacuum cleaner, it is not better to stick a tourist rug (polyethylene) at the form of the bottom.
Before use, you need to pour water into a vessel strictly by tags.
The vacuum cleaners can simply be with an aqua filter or in addition to the aqua filter there is also a separator.
Many can not decide what vacuum cleaner to purchase: aquifioltr vacuum cleaner or cyclone?
All vacuum cleaners have consoles and pluses.
Types of vacuum cleaners:
- with a sack-dust collector;
- without a bag with a container "Cyclone";
- with aqua filter;
- detergents;
- Robots vacuum cleaners.
The vacuum cleaner is not inferior to the cyclone in its peculiarities. The demand for vacuum cleaners-cyclone today is only increasing.
Such a vacuum cleaner consists of an external and internal chamber. After the dust fell into the dust collector, it moves around the spiral, and then rises along the inner chamber.
The dust collector of such a vacuum cleaner consists of high quality materials, in addition, it does not require any additional details.
However, the cyclone vacuum cleaner has both advantages and disadvantages.
Benefits:
- compactness;
- Attractive appearance;
- novelty;
- ease;
- convenient use;
- the presence of all necessary details, so it is not necessary to purchase additional;
- Regardless of the amount of dust assembled, power remains stable.
Disadvantages:
- systematic cleaning of the dust collector;
- strong noise in the process of work.
The choice of aqua filter for a vacuum cleaner is not a simple choice if you don't know what kind of types of aquilifers and what are their features.
Aqua filters are hookah and separable.
Hookah type.
Aqua filter of such a vacuum cleaner is simple design. Such a filter is well sucking large particles.
To solve this problem, it is advisable to install special air filters in vacuum cleaner (for example, coal, paper or spongy).
Thanks to such an additional air filters The hooky type vacuum cleaner will not have flaws and will work as efficiently as possible.
Advantages of a hookah vacuum cleaner:
- availability (acceptable cost);
- perfectly cleans the room;
Disadvantages:
- careful and systematic washing and drying filters;
- the use of a defoamer;
- Little tank volume.
Separate type.
In the vacuum cleaners of this type, the centrifugal force is used, due to which the separation of dust particles, liquid, as well as air, is separated.
The principle of operation of the separatic type vacuum cleaner: the air together with mud enters the vacuum cleaner, and then in the container where water contains.
The separator performs its function - it quickly rotates the liquid. Under influence high pressure All the assembled garbage is completely eliminated.
Inside the filter contains all contaminated particles that are not capable of flying back to the room.
Advantages of separatic type vacuum cleaners:
- maximum degree of cleaning;
- simple care;
- durability;
- high-quality filters.
Unlike a hookah type, this type of vacuum cleaner does not require the installation of additional filters.
The only drawback:
- high price.
From the type of aquilt train depends the price of the vacuum cleaner itself.
Before buying a vacuum cleaner with aquilter, you need to get acquainted with its types.
Such vacuum cleaners are pleasantly impressive with its multifunctionality and efficiency, they will suit any premises.
With this type of vacuum cleaner, you can thoroughly clean the carpet, soft toys, curtains and more.
1. The vacuum cleaner must be powerful.
2. The vacuum cleaner must be equipped with additional features.
3. Multifunctionality is one of the main criteria when choosing a vacuum cleaner with an aqua filter.
For example, a high-quality vacuum cleaner must have an automatic shutdown function with strong heating. This function is to maximize the extent affect the life of the vacuum cleaner.
4. Better to buy a vacuum cleaner with metal pipeShe is most practical and reliable unlike plastic.
5. On average, the volume of the tank must be 1, 5 liters. Do not choose small tanks. Since water has to change every 5 minutes, and this will cause inconvenience.
6. Prefer the vacuum cleaner with a long cord, so the device will be the most mobile as possible.
7. Pay attention to the package. Vacuum cleaners may have turbo and electrical vibrations.
8. Choose a vacuum cleaner with a guarantee of more than 1 year. The warranty period of vacuum cleaners is usually from 1 to 4 years.
Remember that the more warranty, the item is better quality and manufacturers are not afraid of its operation.
By purchasing vacuum cleaners with an aquaille can be eliminated not only contamination, but also clean the air thoroughly.
Such vacuum cleaners - perfect option For people who protect their health and are not indifferent to cleanliness.
Vacuum cleaners, equipped with aquiltre suitable for people who have problems respiratory tract And allergies.
We buy washing vacuum cleaners with aquilter correctly: useful tips:
1. Buy a powerful vacuum cleaner. Power in such vacuum cleaners is different, it all depends on the model.
For example, it can be from 200 to 300 W. Such vacuum cleaners are much more powerful than ordinary vacuum cleaners.
2. Make attention to the materials from which the vacuum cleaner and its functional features and the size of the tank (it should not be too small, as it will cause constant inconvenience with the water replacement).
3. Some vacuum cleaner models have a remote control console for maximum convenience.
Despite the high cost, such modern vacuum cleaners have many predominant features that guarantee a simple, thorough and pleasant cleaning of the whole house.
With a small amount of dust, even the most ordinary household vacuum cleaner will cope. However, for cleaning big House or severely contaminated premises (construction, production facilities, etc.) a container or bag-type vacuum cleaner is unsuitable.
The fact is that the garbage tank will very quickly be clogged, and the suction power will fall.
Moreover, part of the dust is not delayed in dry dust collectors, and again comes out, polluting the air indoors.
Much more efficiently with such a task should be coped water filter vacuum cleaners.
In natural natural conditions Even the smallest dust particles are binding to water - rain, snow, dew, fog. The same principle is used in the vacuum cleaners with aqua filter: the water vortex created inside the aqua filter collects even fine dust, which is not capable of not capable of a solid filter element.
Modern models of water filter vacuum cleaners not only delay up to 99.9% of dust and dirt, but also purified air, work as humidifiers.
Such instruments are very convenient and economical in operation - to regularly buy expensive bags and other consumables are not required, since all dust settles in a water tank.
To clean it, it is enough to drain the dirty water and rinse the container. The only significant lack of vacuum cleaners of this type is a high price.
If the appearance of the device is not fundamental, you can assemble a homemade water vacuum cleaner, which in terms of performance and efficiency will not give up expensive models from well-known brands.
Such a vacuum cleaner will become an indispensable assistant not only when cleaning the apartment, but also when performing dusty construction and finishing works - the finability of walls, grinding, etc.
AquaFilter - is an additional working element, or rather the water capacity through which the air is suused by vacuum cleaner through the discharge.
The water filter is installed before the vacuum cleaner, as a result, all the dirt and dust remains in water, the purified air falls into the vacuum cleaner itself.
To do water filter for vacuum cleaner The following materials and tools will be needed with your own hands:
As for the pipes, their configuration and quantity is determined based on the form and size of the capacity of the homemade aquafiltra.
So, for the manufacture of a water filter from a 12-liter plastic bucket, the following PVC pipe positions will be needed:
The process of making aquiltra itself consists of several stages:
We produce the test of the aquiltra.
VIDEO INSTRUCTION
The first tests are recommended to be carried out at low speed, controlling the condition of the corrugated hose, which comes from the aqua filter to the vacuum cleaner (it should be dry).
If footprints will be visible in the corrugation of water, it is necessary to close the air intake opening inside the filter with a large-scale foam or other porous filtering material.
